Effect of reduced sulfur compounds on the fermentation of phosphoric acid pretreated sugarcane bagasse by ethanologenic Escherichia coli

The addition of reduced sulfur compounds (thiosulfate, cysteine, sodium hydrosulfite, and sodium metabisulfite) increased growth and fermentation of dilute acid hydrolysate of sugarcane bagasse by ethanologenic Escherichia coli (strains LY180, EMFR9, and MM160). With sodium metabisulfite (0.5 mM), toxicity was sufficiently reduced that slurries of pretreated biomass (10% dry weight including fiber and solubles) could be fermented by E. coli strain MM160 without solid-liquid separation or cleanup of sugars. A 6-h liquefaction step was added to improve mixing. Sodium metabisulfite also caused spectral changes at wavelengths corresponding to furfural and soluble products from lignin. Glucose and cellobiose were rapidly metabolized. Xylose utilization was improved by sodium metabisulfite but remained incomplete after 144 h. The overall ethanol yield for this liquefaction plus simultaneous saccharification and co-fermentation process was 0.20 g ethanol/g bagasse dry weight, 250 L/tonne (61 gal/US ton).     

Engineering Bacillus subtilis for acetoin production from glucose and xylose mixtures

As a vital flavor compound, acetoin is extensively used in dairy products and drinks industry. In this study, Bacillus subtilis was engineered to metabolize glucose and xylose as substrates for acetoin production. Initially, gene araE from B. subtilis, encoding the xylose transport protein AraE, was placed under the control of the constitutive promoter P₄₃ for over-expression. Batch cultures showed that 10 g/L xylose was depleted completely in 32 h. Subsequently, genes xylA and xylB from Escherichia coli, encoding xylose isomerase and xylulokinase respectively, were introduced into B. subtilis, and the recombinant turned out to assimilate glucose and xylose without preference. In shake-flask fermentations, 5.5 g/L acetoin with a yield of 0.70 mol (mol sugar)⁻¹ was obtained by the optimum strain BSUL13 under microaerobic conditions, which offered a metabolic engineering strategy on engineering microbe as cell factory for the production of high-valued chemicals from renewable resource.     

Optimization of CDT-1 and XYL1 Expression for Balanced Co-Production of Ethanol and Xylitol from Cellobiose and Xylose by Engineered Saccharomyces cerevisiae

Production of ethanol and xylitol from lignocellulosic hydrolysates is an alternative to the traditional production of ethanol in utilizing biomass. However, the conversion efficiency of xylose to xylitol is restricted by glucose repression, causing a low xylitol titer. To this end, we cloned genes CDT-1 (encoding a cellodextrin transporter) and gh1-1 (encoding an intracellular β-glucosidase) from Neurospora crassa and XYL1 (encoding a xylose reductase that converts xylose into xylitol) from Scheffersomyces stipitis into Saccharomyces cerevisiae, enabling simultaneous production of ethanol and xylitol from a mixture of cellobiose and xylose (main components of lignocellulosic hydrolysates). We further optimized the expression levels of CDT-1 and XYL1 by manipulating their promoters and copy-numbers, and constructed an engineered S. cerevisiae strain (carrying one copy of PGK1p-CDT1 and two copies of TDH3p-XYL1), which showed an 85.7% increase in xylitol production from the mixture of cellobiose and xylose than that from the mixture of glucose and xylose. Thus, we achieved a balanced co-fermentation of cellobiose (0.165 g/L/h) and xylose (0.162 g/L/h) at similar rates to co-produce ethanol (0.36 g/g) and xylitol (1.00 g/g).     

Production of succinate and polyhydroxyalkanoate from substrate mixture by metabolically engineered Escherichia coli

The strategic design of this study aimed at producing succinate and polyhydroxyalkanoate (PHA) from substrate mixture of glycerol/glucose and fatty acid in Escherichia coli. To accomplish this, an E. coli KNSP1 strain derived from E. coli LR1110 was constructed by deletions of ptsG, sdhA and pta genes and overexpression of phaC1 from Pseudomonas aeruginosa. Cultivation of E. coli KNSP1 showed that this strain was able to produce 21.07 g/L succinate and 0.54 g/L PHA (5.62 wt.% of cell dry weight) from glycerol and fatty acid mixture. The generated PHA composed of 58.7 mol% 3-hydroxyoctanoate (3HO) and 41.3 mol% 3-hydroxydecanoate (3HD). This strain would be useful for complete utilization of byproducts glycerol and fatty acid of biodiesel production process.     

Production of succinic acid from sucrose and sugarcane molasses by metabolically engineered Escherichia coli

Sucrose-utilizing genes (cscKB and cscA) from Escherichia coli KO11 were cloned and expressed in a metabolically engineered E. coli KJ122 to enhance succinate production from sucrose. KJ122 harboring a recombinant plasmid, pKJSUC, was screened for the efficient sucrose utilization by growth-based selection and adaptation. KJ122-pKJSUC-24T efficiently utilized sucrose in a low-cost medium to produce high succinate concentration with less accumulation of by-products. Succinate concentrations of 51 g/L (productivity equal to 1.05 g/L/h) were produced from sucrose in anaerobic bottles, and concentrations of 47 g/L were produced in 10 L bioreactor within 48 h. Antibiotics had no effect on the succinate production by KJ122-pKJSUC-24T. In addition, succinate concentrations of 62 g/L were produced from sugarcane molasses in anaerobic bottles, and concentrations of 56 g/L in 10 L bioreactor within 72 h. These results demonstrated that KJ122-pKJSUC-24T would be a potential strain for bio-based succinate production from sucrose and sugarcane molasses.     

Co-fermentation of carbon sources by Enterobacter aerogenes ATCC 29007 to enhance the production of bioethanol

We investigated the enhancement of bioethanol production in Enterobacter aerogenes ATCC 29007 by co-fermentation of carbon sources such as glycerol, glucose, galactose, sucrose, fructose, xylose, starch, mannitol and citric acid. Biofuel production increases with increasing growth rate of microorganisms; that is why we investigated the optimal growth rate of E. aerogenes ATCC 29007, using mixtures of different carbon sources with glycerol. E. aerogenes ATCC 29007 was incubated in media containing each carbon source and glycerol; growth rate and bioethanol production improved in all cases compared to those in medium containing glycerol alone. The growth rate and bioethanol production were highest with mannitol. Fermentation was carried out at 37 °C for 18 h, pH 7, using 50 mL defined production medium in 100 mL serum bottles at 200 rpm. Bioethanol production under optimized conditions in medium containing 16 g/L mannitol and 20 g/L glycerol increased sixfold (32.10 g/L) than that containing glycerol alone (5.23 g/L) as the carbon source in anaerobic conditions. Similarly, bioethanol production using free cells in continuous co-fermentation also improved (27.28 g/L) when 90.37 % of 16 g/L mannitol and 67.15 % of 20 g/L glycerol were used. Although naturally existing or engineered microorganisms can ferment mixed sugars sequentially, the preferential utilization of glucose to non-glucose sugars often results in lower overall yield and productivity of ethanol. Here, we present new findings in E. aerogenes ATCC 29007 that can be used to improve bioethanol production by simultaneous co-fermentation of glycerol and mannitol.     

Production of d-ribose by metabolically engineered Escherichia coli

Escherichia coli was metabolically engineered for the production of d-ribose, a functional five-carbon sugar, from xylose. For the accumulation of d-ribose, two genes of transketolase catalyzing the conversion of d-ribose-5-phosphate to sedoheptulose-7-phosphate in pentose phosphate pathway were disrupted to create a transketolase-deficient E. coli SGK013. In batch fermentation, E. coli SGK013 grew by utilizing glucose and then started to produce d-ribose from xylose after glucose depletion. E. coli SGK013 produced 0.75 g/L of d-ribose, which was identical to the standard d-ribose as confirmed by HPLC and LC/MS analyses. To improve D-ribose production, the ptsG gene encoding the glucose-specific IICB component was disrupted additionally, resulting in the construction of E. coli SGK015. The carbon catabolite repression-negative E. coli SGK015 utilized xylose and glucose simultaneously and produced up to 3.75 g/L of d-ribose, which is a 5-fold improvement compared to that of E. coli SGK013.     

Complete genome sequence,metabolic model construction and phenotypic characterization of Geobacillus LC300, an extremely thermophilic,fast growing,xylose-utilizing bacterium

We have isolated a new extremely thermophilic fast-growing Geobacillus strain that can efficiently utilize xylose, glucose, mannose and galactose for cell growth. When grown aerobically at 72 °C, Geobacillus LC300 has a growth rate of 2.15 h⁻¹ on glucose and 1.52 h⁻¹ on xylose (doubling time less than 30 min). The corresponding specific glucose and xylose utilization rates are 5.55 g/g/h and 5.24 g/g/h, respectively. As such, Geobacillus LC300 grows 3-times faster than E. coli on glucose and xylose, and has a specific xylose utilization rate that is 3-times higher than the best metabolically engineered organism to date. To gain more insight into the metabolism of Geobacillus LC300 its genome was sequenced using PacBio׳s RS II single-molecule real-time (SMRT) sequencing platform and annotated using the RAST server. Based on the genome annotation and the measured biomass composition a core metabolic network model was constructed. To further demonstrate the biotechnological potential of this organism, Geobacillus LC300 was grown to high cell-densities in a fed-batch culture, where cells maintained a high xylose utilization rate under low dissolved oxygen concentrations. All of these characteristics make Geobacillus LC300 an attractive host for future metabolic engineering and biotechnology applications.     

Improved cellobiose utilization in E. coli by including both hydrolysis and phosphorolysis mechanisms

Cellobiose is a major intermediate from cellulase hydrolysis of pretreated plant biomass. Engineering biocatalysts for direct use of cellobiose could eliminate the need for exogenous β-glucosidase. Additionally, rapid removal of cellobiose in a simultaneous saccharification and fermentation facilitates enzymatic hydrolysis as cellobiose is a potent inhibitor for cellulases. We report here improved cellobiose utilization by engineering Escherichia coli to assimilate the disaccharide both hydrolytically and phosphorolytically (shorter fermentation time). Additionally, we demonstrate that engineering intracellular cellobiose utilization circumvents catabolite repression allowing simultaneous fermentation of xylose and cellobiose. Using meso-2,3-butanediol as model product, we further demonstrate that the accelerated carbon metabolism led to improved product formation (higher titers and shorter fermentation times), illustrating the utility of the engineered biocatalysts in biorefinery applications.     

Development of an industrial medium for economical 2,3-butanediol production through co-fermentation of glucose and xylose by Klebsiella oxytoca

An industrial medium containing urea as a sole nitrogen source, low levels of corn steep liquor and mineral salts as nutrition factors to retain high 2,3-butanediol production through co-fermentation of glucose and xylose (2:1, wt/wt) by Klebsiella oxytoca was developed. Urea and corn steep liquor were identified as the most significant factors by the two-level Plackett–Burman design. Steepest ascent experiments were applied to approach the optimal region of the two factors and a central composite design was employed to determine their optimal levels. Under the optimal medium, the yield of 2,3-butanediol plus acetoin relative to glucose and xylose was up to 0.428 g/g, which was 85.6% of theoretical value. The cheap nitrogen source and nutrition factors combining the co-fermentation process using lignocellulose derived glucose and xylose as the carbon source in the developed medium would be a potential solution to improve the economics of microbial 2,3-butanediol production.     

Microbial production of N-acetylneuraminic acid by genetically engineered Escherichia coli

Previously, we described the production of N-acetylneuraminic acid (NeuAc) from N-acetylglucosamine (GlcNAc) in a system combining recombinant Escherichia coli expressing GlcNAc 2-epimerase (slr1975), E. coli expressing NeuAc synthetase (neuB), and Corynebacterium ammoniagenes. However, this system was unsuitable for large-scale production because of its complexity and low productivity. To overcome these problems, we constructed a recombinant E. coli simultaneously overexpressing slr1975 and neuB. This recombinant E. coli produced 81 mM (25 g/L) NeuAc in 22 h without the addition of C. ammoniagenes cells. For manufacturing on an industrial scale, it is preferable to use unconcentrated culture broth as the source of enzymes, and therefore, a high-density cell culture is required. An acetate-resistant mutant strain of E. coli (HN0074) was selected as the host strain because of its ability to grow to a high cell density. The NeuAc aldolase gene of E. coli HN0074 was disrupted by homologous recombination yielding E. coli N18-14, which cannot degrade NeuAc. After a 22 h reaction with 540 mM (120 g/L) GlcNAc in a 5 L jar fermenter, the culture broth of E. coli N18-14 overexpressing slr1975 and neuB contained 172 mM (53 g/L) NeuAc.     

Metabolic Engineering of Escherichia coli for the Production of Xylonate

Xylonate is a valuable chemical for versatile applications. Although the chemical synthesis route and microbial conversion pathway were established decades ago, no commercial production of xylonate has been obtained so far. In this study, the industrially important microorganism Escherichia coli was engineered to produce xylonate from xylose. Through the coexpression of a xylose dehydrogenase (xdh) and a xylonolactonase (xylC) from Caulobacter crescentus, the recombinant strain could convert 1 g/L xylose to 0.84 g/L xylonate and 0.10 g/L xylonolactone after being induced for 12 h. Furthermore, the competitive pathway for xylose catabolism in E. coli was blocked by disrupting two genes (xylA and xylB) encoding xylose isomerase and xylulose kinase. Under fed-batch conditions, the finally engineered strain produced up to 27.3 g/L xylonate and 1.7 g/L xylonolactone from 30 g/L xylose, about 88% of the theoretical yield. These results suggest that the engineered E. coli strain has a promising perspective for large-scale production of xylonate.     

An in vivo, label-free quick assay for xylose transport in Escherichia coli

Efficient use of xylose is necessary for economic production of biochemicals and biofuels from lignocellulosic materials. Current studies on xylose uptake for various microorganisms have been hampered by the lack of a facile assay for xylose transport. In this work, a rapid in vivo, label-free method for measuring xylose transport in Escherichia coli was developed by taking advantage of the Bacillus pumilus xylosidase (XynB), which cleaved a commercially available xylose analog, p-nitrophenyl-β-d-xylopyranoside (pNPX), to release a chromogenic group, p-nitrophenol (pNP). XynB was expressed alone or in conjunction with a Zymomonas mobilis glucose facilitator protein (Glf) capable of transporting xylose. This XynB-mediated transport assay was demonstrated in test tubes and 96-well plates with submicromolar concentrations of pNPX. Kinetic inhibition experiments validated that pNPX and xylose were competitive substrates for the transport process, and the addition of glucose (20 g/L) in the culture medium clearly diminished the transmembrane transport of pNPX and, thus, mimicked its inhibitory action on xylose uptake. This method should be useful for engineering of the xylose transport process in E. coli, and similar assay schemes can be extended to other microorganisms.     

Bioethanol fermentation by recombinant E. coli FBR5 and its robust mutant FBHW using hot-water wood extract hydrolyzate as substrate

Hemicellulose is a potential by-product currently under-utilized in the papermaking industry. It is a hetero-carbohydrate polymer. For hardwood hemicelluloses, D-xylose is the major component upon depolymerization. At SUNY-ESF, wood extracts were obtained by extracting sugar maple wood chips with hot water at an elevated temperature. The wood extracts were then concentrated and acid hydrolyzed. Ethanologenic bacteria, E. coli FBR5, had a good performance in pure xylose medium for ethanol production. However, FBR5 was strongly inhibited in dilute sulfuric acid hydrolyzate of hot-water wood extract. FBR5 was challenged by hot-water wood extract hydrolyzate in this study. After repeated strain adaptation, an improved strain: E. coli FBHW was obtained. Fermentation experiments indicated that FBHW was resistant to the toxicity of hydrolyzate in the fermentation media of concentrated hydrolyzate, and xylose was completely utilized by the strain to produce ethanol. FBHW was grown in the concentrated hydrolyzate without any detoxification treatment and has yielded 36.8 g/L ethanol.     

Efficient production of polylactic acid and its copolymers by metabolically engineered Escherichia coli

Polylactic acid (PLA) is one of the promising biodegradable polymers, which has been produced in a rather complicated two-step process by first producing lactic acid by fermentation followed by ring opening polymerization of lactide, a cyclic dimer of lactic acid. Recently, we reported the production of PLA and its copolymers by direct fermentation of metabolically engineered Escherichia coli equipped with the evolved propionate CoA-transferase and polyhydroxyalkanoate (PHA) synthase using glucose as a carbon source. When employing these initially constructed E. coli strains, however, it was necessary to use an inducer for the expression of the engineered genes and to feed succinate for proper cell growth. Here we report further metabolic engineering of E. coli strain to overcome these problems for more efficient production of PLA and its copolymers. This allowed efficient production of PLA and its copolymers without adding inducer and succinate. The finally constructed recombinant E. coli JLXF5 strain was able to produce P(3HB-co-39.6 mol% LA) having the molecular weight of 141,000 Da to 20 g l⁻¹ with a polymer content of 43 wt% in a chemically defined medium by the pH-stat fed-batch culture.     

Simultaneous production of 3-hydroxypropionic acid and 1,3-propanediol from glycerol by a recombinant strain of Klebsiella pneumoniae

In this study, an aldehyde dehydrogenase (ALDH) was over-expressed in Klebsiella pneumoniae for simultaneous production of 3-hydroxypropionic acid (3-HP) and 1,3-propanediol (1,3-PDO). Various genes encoding ALDH were cloned and expressed in K. pneumoniae, and expression of Escherichia colialdH resulted in the highest 3-HP titer in anaerobic cultures in shake flasks. Anaerobic fed-batch culture of this recombinant strain was further performed in a 5-L reactor. The 3-HP concentration and yield reached 24.4 g/L and 0.18 mol/mol glycerol, respectively, and at the same time 1,3-PDO achieved 49.3 g/L with a yield of 0.43 mol/mol in 24 h. The overall yield of 3-HP plus 1,3-PDO was 0.61 mol/mol. Over-expression of the E. coli AldH also reduced the yields of by-products except for lactate. This study demonstrated the possibility of simultaneous production of 3-HP and 1,3-PDO by K. pneumoniae under anaerobic conditions without supply of vitamin B₁₂.     

Conversion of glucose‐xylose mixtures to pyruvate using a consortium of metabolically engineered Escherichia coli

Two strains of Escherichia coli were engineered to accumulate pyruvic acid from two sugars found in lignocellulosic hydrolysates by knockouts in the aceE, ppsA, poxB, and ldhA genes. Additionally, since glucose and xylose are typically consumed sequentially due to carbon catabolite repression in E. coli, one strain (MEC590) was engineered to grow only on glucose while a second strain (MEC589) grew only on xylose. On a single substrate, each strain generated pyruvate at a yield of about 0.60 g/g in both continuous culture and batch culture. In a glucose‐xylose mixture under continuous culture, a consortium of both strains maintained a pyruvate yield greater than 0.60 g/g when three different concentrations of glucose and xylose were sequentially fed into the system. In a fed‐batch process, both sugars in a glucose‐xylose mixture were consumed simultaneously to accumulate 39 g/L pyruvate in less than 24 h at a yield of 0.59 g/g.     

Genetic Engineering of Zymobacter palmae for Production of Ethanol from Xylose

Its metabolic characteristics suggest that Zymobacter palmae gen. nov., sp. nov. could serve as a useful new ethanol-fermenting bacterium, but its biotechnological exploitation will require certain genetic modifications. We therefore engineered Z. palmae so as to broaden the range of its fermentable sugar substrates to include the pentose sugar xylose. The Escherichia coli genes encoding the xylose catabolic enzymes xylose isomerase, xylulokinase, transaldolase, and transketolase were introduced into Z. palmae, where their expression was driven by the Zymomonas mobilis glyceraldehyde-3-phosphate dehydrogenase promoter. When cultured with 40 g/liter xylose, the recombinant Z. palmae strain was able to ferment 16.4 g/liter xylose within 5 days, producing 91% of the theoretical yield of ethanol with no accumulation of organic acids as metabolic by-products. Notably, xylose acclimation enhanced both the expression of xylose catabolic enzymes and the rate of xylose uptake into recombinant Z. palmae, which enabled the acclimated organism to completely and simultaneously ferment a mixture of 40 g/liter glucose and 40 g/liter xylose within 8 h, producing 95% of the theoretical yield of ethanol. Thus, efficient fermentation of a mixture of glucose and xylose to ethanol can be accomplished by using Z. palmae expressing E. coli xylose catabolic enzymes.     

Co-fermentation of cellobiose and xylose using beta-glucosidase displaying diploid industrial yeast strain OC-2

The co-utilization of sugars, particularly xylose and glucose, during industrial fermentation is essential for economically feasible processes with high ethanol productivity. However, the major problem encountered during xylose/glucose co-fermentation is the lower consumption rate of xylose compared with that of glucose fermentation. Here, we therefore attempted to construct high xylose assimilation yeast by using industrial yeast strain with high β-glucosidase activity on the cell surface. We first constructed the triple auxotrophic industrial strain OC2-HUT and introduced four copies of the cell-surface-displaying β-glucosidase (BGL) gene and two copies of a xylose-assimilating gene into its genome to generate strain OC2-ABGL4Xyl2. It was confirmed that the introduction of multiple copies of the BGL gene increased the cell-surface BGL activity, which was also correlated to the observed increase in xylose-assimilating ability. The strain OC2-ABGL4Xyl2 was able to consume xylose during cellobiose/xylose co-fermentation (0.38 g/h/g-DW) more rapidly than during glucose/xylose co-fermentation (0.18 g/h/g-DW). After 48 h, 5.77% of the xylose was consumed despite the co-fermentation conditions, and the observed ethanol yield was 0.39 g-ethanol/g-total sugar. Our results demonstrate that a BGL-displaying and xylose-assimilating industrial yeast strain is capable of efficient xylose consumption during the co-fermentation with cellobiose. Due to its high performance for fermentation of mixtures of cellobiose and xylose, OC2-ABGL4Xyl2 does not require the addition of β-glucosidase and is therefore a promising yeast strain for cost-effective ethanol production from lignocellulosic biomass.     

Strain engineering of Saccharomyces cerevisiae for enhanced xylose metabolism

Efficient and rapid fermentation of all sugars present in cellulosic hydrolysates is essential for economic conversion of renewable biomass into fuels and chemicals. Xylose is one of the most abundant sugars in cellulosic biomass but it cannot be utilized by wild type Saccharomyces cerevisiae, which has been used for industrial ethanol production. Therefore, numerous technologies for strain development have been employed to engineer S. cerevisiae capable of fermenting xylose rapidly and efficiently. These include i) optimization of xylose-assimilating pathways, ii) perturbation of gene targets for reconfiguring yeast metabolism, and iii) simultaneous co-fermentation of xylose and cellobiose. In addition, the genetic and physiological background of host strains is an important determinant to construct efficient and rapid xylose-fermenting S. cerevisiae. Vibrant and persistent researches in this field for the last two decades not only led to the development of engineered S. cerevisiae strains ready for industrial fermentation of cellulosic hydrolysates, but also deepened our understanding of operational principles underlying yeast metabolism.