Site-specific ribosomal DNA insertion elements in Anopheles gambiae and A. arabiensis: nucleotide sequence of gene-element boundaries.

The nucleotide sequence of the junctions between the 28S ribosomal gene and site-specific insertion elements from two sibling mosquito species, Anopheles gambiae and A. arabiensis, is reported. In both species, elements insert at the same point within the 28S gene, but this site is 634 basepairs (bp) 3' of the R1 (Type I) insertion site in Drosophila melanogaster. The two mosquito elements each have poly A tails and a polyadenylation signal, but the extreme 3' and 5' ends show no other similarity to each other or to any other insertion element. In both mosquito species, identical target site duplications of 17 bp are generated. The sequence TNTCCCTNT found in this duplication is also found in the 14 bp target site duplications that flank R1 elements in D. melanogaster. Another sequence in this duplication, GGGATAACT, is very similar to the sequence GGGAGTAACT found in the 24 base sequence required by the Bombyx mori R2 endonuclease.     

Coding region deletions associated with the major form of rDNA interruption in Drosophila

The nucleotide sequences at and around the termini of 5 kb type 1 interruptions in three separate clones of D. melanogaster rDNA repeats have been determined, and have been compared with the sequence of the corresponding region of an insertion-free rDNA repeat. All three interrupted rDNA repeats contain a small deletion of 28S rRNA coding material at the left coding/insertion sequence junction. A second deletion was found in one of the three clones, ad other aberrations were suggested by the results of restriction enzyme digestions of unfractionated rDNA. The termini of 5 kb type 1 rDNA insertions in D. melanogaster were also compared with the corresponding regions of 28S rDNA interruptions in D. virilis: the insertion site is identical in the two species, but the termini of the two species' interruptions show no homology. I sequenced a 1.1 kb region of the 5 kb type 1 D. melanogaster rDNA interruption that covers the sequences of the 1 kb and 0.5 kb insertions. There is 98% homology between the rightmost 1 kb of the 5 kb interruption and the sequences of the shorter insertions. Data suggest that Drosophila rDNA interruptions arose as a transposable element, and that divergence had included length alterations generated by unequal crossing over.     

The intron boundaries and flanking rRNA coding sequences of Calliphora erythrocephala rDNA

We have sequenced the available cloned examples of the intron-coding sequence junctions for the rDNA of the higher Dipteran, Calliphora erythrocephala. The introns interrupt the rDNA at the same position as the type 1 intron family detected in Drosophila melanogaster and D. virilis (10,11). A duplication of 14 base pairs of the 28S rRNA coding sequence surrounds a short version of the major genomic length class of introns. This same duplication is associated with boundaries of the type 1 introns in D. virilis and D. melanogaster (10, 13,14). We have detected considerable homology between the 3' intron sequences of C. erythrocephala and D. virilis. The rRNA coding sequences flanking the introns are extremely homologous in C. erythrocephala, D. melanogaster and D. virilis, with only one small region of significant divergence. This corresponds to a variable stem region previously identified in eukaryotic 28S rRNA at a site analogous to the L1 ribosomal protein binding site of prokaryotic 23S rRNA (27).     

New transposable elements identified as insertions in rice transposon Tnr1

Tnr1 (235 bp long) is a transposable element in rice. Polymerase chain reactions (PCRs) done with a primer(s) that hybridizes to terminal inverted repeat sequences (TIRs) of Tnr1 detected new Tnr1 members with one or two insertions in rice genomes. Six identified insertion sequences (Tnr4, Tnr5, Tnr11, Tnr12, Tnr13 and RIRE9) did not have extensive homology to known transposable elements, rather they had structural features characteristic of transposable elements. Tnr4 (1767 bp long) had imperfect 64-bp TIRs and appeared to generate duplication of a 9-bp sequence at the target site. However, the TIR sequences were not homologous to those of known transposable elements, indicative that Tnr4 is a new transposable element. Tnr5 (209 bp long) had imperfect 46-bp TIRs and appeared to generate duplication of sequence TTA like that of some elements of the Tourist family. Tnr11 (811 bp long) had 73-bp TIRs with significant homology to those of Tnr1 and Stowaway and appeared to generate duplication of sequence TA, indicative that Tnr11 is a transposable element of the Tnr1/Stowaway family. Tnr12 (2426 bp long) carried perfect 9-bp TIRs, which began with 5'-CACTA- -3' from both ends and appeared to generate duplication of a 3-bp target sequence, indicative that Tnr12 is a transposable element of the En/Spm family. Tnr13 (347 bp long) had 31-bp TIRs and appeared to generate duplication of an 8-bp target sequence. Two sequences, one the transposon-like element Crackle, had partial homology in the Tnr13 ends. All five insertions appear to be defective elements derived from autonomous ones encoding the transposase gene. All had characteristic tandem repeat sequences which may be recognized by transposase. The sixth insertion sequence, named RIRE9 (3852 bp long), which begins with 5'-TG- -3' and ends with 5'- -CA-3', appeared to generate duplication of a 5-bp target sequence. These and other structural features indicate that this insertion is a solo LTR (long terminal repeat) of a retrotransposon. The transposable elements described above could be identified as insertions into Tnr1, which do not deleteriously affect the growth of rice cells.     

Site specific insertion of a type I rDNA element into a unique sequence in the Drosophila melanogaster genome.

We describe a cloned segment of unique DNA from the Oregon R strain of Drosophila melanogaster that contains a short type I insertion of the kind principally found within rDNA. The predominant type I rDNA insertion is 5kb in length, but there are also a co-terminal sub-set of shorter type I elements that share a common right hand junction with the rDNA. The insertion that we now describe is another member of this sub-set. The right hand junction of the type I sequence with the unique DNA is identical to the right hand junction of the type I sequences with rDNA. There is no significant feature within the insertion sequence that could have determined the position of the left junction with the sequence into which it is inserted. Like the corresponding short type I insertions in rDNA, the insertion into the unique DNA is flanked on both sides by a duplicated sequence, which in this case is 10 base pairs long. The cloning of a sequence corresponding to the uninterrupted unique location was facilitated by the observation that the Karsnas strain of D. melanogaster contains only uninterrupted sequences of this kind. The duplicated sequence at the target site for the insertion is only present as a single copy in the uninterrupted DNA. The sequence of the target site for the insertion (ACTGTTCT) in the unique segment shows a striking homology to the target in rDNA (ACTGTCCC).     

Introns and their flanking sequences of Bombyx mori rDNA.

We obtained two different clones (16 kb and 13 kb) of B. mori rDNA with intron sequence within the 28S-rRNA coding region. The sequence surrounding the intron was found to be highly conserved as indicated in several eukaryotes (Tetrahymena, Drosophila and Xenopus). The 28S rRNA-coding sequence of 16 kb and 13 kb clone was interrupted at precisely the same sites as those where the D. melanogaster rDNA interrupted by the type I and type II intron, respectively. The intron sequences of B. mori were different from those of D. melanogaster. In 16 kb clone, the intron was flanked by 14 bp duplication of the junction sequence, which was also present once within the 28S rRNA-coding region of rDNA without intron. This 14 bp sequence was identical with those surrounding the introns of Dipteran rDNAs.     

Isolation and characterization of a Ty element inserted into the ribosomal DNA of the yeast Saccharomyces cerevisiae.

The yeast Saccharomyces cerevisiae has about 30 to 50 copies of a transposable element Ty. Most of these elements are located at the 5' ends of protein coding sequences and are flanked by a 5 bp duplication. We report below an insertion of a Ty element into one of the repeated ribosomal RNA (rRNA) genes of yeast. The element is located between the 3' ends of the divergentally transcribed 37S and 5S rRNA's and is not flanked by a 5 bp duplication. In addition, one end of the Ty insertion is contiguous with a 306 bp deletion of the sequences of the rRNA gene. We find that this insertion, unlike most Ty insertions, is mitotically unstable.     

A ribosomal orphon sequence from Xenopus laevis flanked by novel low copy number repetitive elements

We have used a differential cloning approach to isolate ribosomal/non-ribosomal frontier sequences from Xenopus laevis. A ribosomal intergenic spacer sequence (IGS) was cloned and shown not to be physically linked with the ribosomal locus. This ribosomal orphon contained the IGS sequences found immediately downstream of the 28S gene and included an array of enhancer repetitions and a non-functional spacer promoter. The orphon sequence was flanked by a member of the novel 'Frt' low copy repetitive element family. Three individual Frt repeats were sequenced and all members of this family were shown to lie clustered at two chromosomal sites, one of which contained the ribosomal orphon. One of the Frt elements contained an insertion of 297 bp that showed extensive homology to sequences within at least three other Xenopus genes. Each homology region was flanked by members of the T2 family of short interspersed repetitive elements, (SINEs), and by its target insertion sequence, suggesting multiple translocation events. The data are discussed in terms of the evolution of the ribosomal gene locus.     

X and Y chromosomal ribosomal DNA of Drosophila: comparison of spacers and insertions.

In Drosophila melanogaster, the genes coding for 18S and 28S ribosomal RNA (rDNA) are clustered at one locus each on the X and the Y chromosomes. We have compared the structure of rDNA at the two loci. The 18S and 28S rRNAs coded by the X and Y chromosomes are very similar and probably identical (Maden and Tartof, 1974). In D. melanogaster, many rDNA repeating units are interrupted in the 28S RNA sequence by a DNA region called the insertion. There are at least two sequence types of insertions. Type 1 insertions include the most abundant 5 kilobase (kb) class and homologous small (0.5 and 1 kb) insertions. Most insertions between 1.5 and 4 kb have no homology to the 5 kb class and are identified as type 2 insertions. In X rDNA, about 49% of all rDNA repeats have type 1 insertions, and another 16% have type 2 insertions. On the Y chromosome, only 16% of all rDNA repeats are interrupted, and most if not all insertions are of type 2.rDNA fragments derived from the X and Y chromosomes have been cloned in E. coli. The homology between the nontranscribed spacers in X and Y rDNA was studied with cloned fragments. Stable heteroduplexes were found which showed that these regions on the two chromosomes are very similar.The evolution of rDNA in D. melanogaster might involve genetic exchange between the X and Y chromosomal clusters with restrictions on the movement of type 1 insertions to the Y chromosome.     

A molecular basis for discrete size variation in human ribosomal DNA.

The tandemly repeated human ribosomal RNA (rRNA) genes contain a region of size heterogeneity that is present in the nontranscribed spacer of every individual examined. This heterogeneity has been previously examined by Southern analysis of BamHI-digested human DNA. Using a ribosomal DNA (rDNA) probe specific for the 3' end of the 28S rRNA gene, at least four discrete sizes of BamHI fragments were seen in human populations. Molecular analysis of the cloned DNA from this region reveals tandem duplication of a segment of spacer rDNA located 388 base pairs (bp) 3' to the end of the 28S ribosomal RNA gene. Five hundred fifty bp of DNA, flanked on either side by a 150-bp repeated element, is either duplicated or deleted to produce a series of spacers that differ in size by 850 bp. These duplications/deletions appear to be the product of unequal homologous exchange, mediated by the small repeated element. Thus, human rDNA fragments cloned in lambda vectors and propagated in E. coli generate the same apparent size variation seen in genomic DNA. This study suggests that unequal homologous exchange is the molecular basis for the observed length heterogeneity in the spacer rDNA and may be a common mechanism for the generation of human genetic diversity.     

Ribosomal DNA in Drosophila melanogaster. II. Heteroduplex mapping of cloned and uncloned rDNA.

Sequences in the cloned Drosophila melanogaster rDNA fragments described by Dawid et al. (1978) were compared by heteroduplex mapping. The nontranscribed spacer regions in all fragments are homologous but vary in length. Deletion loops were observed at variable positions in the spacer region suggesting that spacers are internally repetitious.Many rDNA repeats in D. melanogaster have a 28 S gene interrupted by a region named the ribosomal insertion. Insertions of 0.5, 1 and 5 kb were found in repeat-length EcoRI fragments. These DNA regions, named type 1 insertions, are homologous at their right ends. Although 1 kb insertions are quite precisely twice as large as 0.5 kb insertions they do not represent a duplication of the shorter sequence. Some insertions have at least one EcoRI site and therefore yield EcoRI fragments which are only part of a repeat. The sequences in two cloned right-hand partial insertion sequences are homologous, but the sequences in two lefthand partial insertions are not. None of the EcoRI-restrictable insertion sequences has any homology to any part of type 1 insertions; they are thus grouped together as type 2. Evidence for insertion sequences of at least two types in uncloned rDNA was obtained by annealing a cloned fragment with a 1 kb insertion to genomic rDNA. About 15% of the rDNA repeats show substitution type loops between the 1 kb type 1 insertion derived from the cloned fragment and type 2 insertions in the rDNA.     

A 9.6 kb intervening sequence in D. virilis rDNA, and sequence homology in rDNA interruptions of diverse species of Drosophila and other diptera.

A large proportion of the 28S ribosomal RNA genes in Drosophila virilis are interrupted by a DNA sequence 9.6 kilobase pairs long. As regards both its presence and its position in the 28S gene (about two thirds of the way in), the D. virilis rDNA intervening sequence is similar to that found in D. melanogaster rDNA, but lengths differ markedly between the two species. Degrees of nucleotide sequence homology have been detected bewteen rDNA interruptions of the two species. This homology extends to putative rDNA intervening sequences in diverse higher diptera (other Drosophila species, the house fly and the flesh fly), but hybridization of cloned D. melanogaster and D. virilis rDNA interruption segments to DNA of several lower diptera has been negative. As is the case with melanogaster rDNA interruptions, segments of the virilis rDNA intervening sequence hybridize with non-rDNA components of the virilis genome, and interspecific homology may involve these non-rDNA sequences as well as rDNA interruptions. There is, however, evidence from buoyant density fractionation of DNA that the distributions of interruption-related sequences are distinct in D. melanogaster and D. virilis genomes. Moreover, thermal denaturation studies have indicated differing extents of homology between hybridizable sequences in D. virilis DNA and different segments of the D. melanogaster rDNA intervening sequence. We infer from our studies that rDNA intervening sequences are prevalent among higher diptera; that in the course of the evolution of these organisms, elements of the intervening sequences have been moderately to highly conserved; and that this conservation extends in at least two distantly related species of Drosophila to similar sequences found elsewhere in the genomes.     

Genomic and structural organization of Drosophila melanogaster G elements.

The properties and the genomic organization of G elements, a moderately repeated DNA family of D. melanogaster, are reported. G elements lack terminal repeats, generate target site duplications at the point of insertion and exhibit at one end a stretch of A residues of variable length. In a large number of recombinant clones analyzed G elements occur in tandem arrays, interspersed with specific ribosomal DNA (rDNA) segments. This arrangement results from the insertion of members of the G family within the nontranscribed spacer (NTS) of rDNA units. Similarity of the site of integration of G elements to that of ribosomal DNA insertions suggests that distinct DNA sequences might have been inserted into rDNA through a partly common pathway.