Mutant OmpF porins of Yersinia pseudotuberculosis with deletions of external loops: Structure–functional and immunochemical properties

Recombinant mutant OmpF porins from Yersinia pseudotuberculosis outer membrane were obtained using site-directed mutagenesis. Here we used four OmpF mutants where single extracellular loops L1, L4, L6, and L8 were deleted one at a time. The proteins were expressed in Escherichia coli at levels comparable to full-sized recombinant OmpF porin and isolated from the inclusion bodies. Purified trimers of the mutant porins were obtained after dialysis and consequent ion-exchange chromatography. Changes in molecular and spatial structure of the mutants obtained were studied using SDS–PAGE and optical spectroscopy (circular dichroism and intrinsic protein fluorescence). Secondary and tertiary structure of the mutant proteins was found to have some features in comparison with that of the full-sized recombinant OmpF. As shown by bilayer lipid membrane technique, the pore-forming activity of purified mutant porins was identical to OmpF porin isolated from the bacterial outer membrane. Lacking of the external loops mentioned above influenced significantly upon the antigenic structure of the porin as demonstrated using ELISA.     

OmpC-like porin from Yersinia pseudotuberculosis: Molecular characteristics, physico-chemical and functional properties

Pore-forming protein from the outer membrane of Yersinia pseudotuberculosis cultured at 37°C has been isolated and characterized. Comparative analysis of the primary and three-dimensional structures of this protein and of OmpC porin from E. coli was carried out, functional properties of these proteins have been studied using bilayer lipid membranes (BLM) technique. The degree of homology, molecular mass and pore-forming properties of the isolated porin was found to be closer to those of OmpC porin from E. coli than OmpF porin from Y. pseudotuberculosis. The value of the most probable conductivity of OmpC porin from Y. pseudotuberculosis (0.18 pS) in BLM corresponded to the conductivity of the native trimer of this protein. Using CD spectroscopy, the porins investigated were shown to belong to the β-structured proteins. Data of the primary structure and intrinsic protein fluorescence revealed essential differences in localization and microenvironment of tryptophan residues in the porins investigated. Participation of external loops L2 and L6 in the formation of the antigenic structure of OmpC porin from Y. pseudotuberculosis was demonstrated. On the basis of crystal structure of osmoporin from Klebsiella pneumoniae, three-dimensional models of the monomer and trimer of the Y. pseudotuberculosis porin were obtained. Using Web server AGGRESCAN, the localization of protein structure sites with the increased aggregation capability (hot spots) has been deter-mined. It turned out that some of these zones localize in the region of intramonomeric contacts in the porin trimer; however, a large part of them is located on the external surface of the β-barrel. The process of thermal denaturation has been studied and the melting points of the porins were determined. It was found that significant changes in the microenvironment of the indole fluorophores (especially tryptophan residues of spectral class I) took place in the process of the thermodenaturation of the proteins. These changes preceded the irreversible conformational transition observed for the E. coli porin at 77°C and for the Y. pseudotuberculosis porin at 70°C.     

Isolation and characterization of recombinant OmpF-like porin from the Yersinia pseudotuberculosis outer membrane

The encoding sequence of the pore-forming OmpF-like protein from the Yersinia pseudotuberculosis outer membrane was cloned and expressed in Escherichia coli cells. Conditions were selected for isolation and refolding of recombinant monomer and porin trimer. Their spatial structures were characterized by the intrinsic protein fluorescence and CD spectroscopy. It was shown that the recombinant porins are similar in the composition of secondary structure elements to the isolated porins, but have a considerably less compact tertiary structure. The pore-forming activities of the recombinant proteins are similar to those of Y. pseudotuberculosis native porins. The English version of the paper: Russian Journal of Bioorganic Chemistry, 2008, vol. 34, no. 2; see also http://www.maik.ru.     

<Emphasis Type="Italic">Yersinia pseudotuberculosis</Emphasis> mutant OmpF porins with deletions of the external loops: genetic constructions design,expression, isolation and refolding

Yersinia pseudotuberculosis outer membrane (OM) recombinant mutant OmpF porins with deletions of the external loops L1, L6 and L8 were obtained using site-directed mutagenesis of the recombinant plasmid including ompF gene. Heterologeous expression of the mutant proteins was carried out in strain Rosetta of Escherichia coli (Novagen, USA), porins with the deletions were isolated from the inclusion bodies. Oligomers of mutant porins were obtained as result of dialysis and ion-exchange chromatography. Spatial structure of the mutant proteins was found to have special features in comparison with that of the full-structured OmpF porin on the level of both secondary and tertiary structure. As shown using bilayer lipid membrane (BLM) technique the absence of the loops L1, L6 and L8 didn’t affect the conductivity level of Y. pseudotuberculosis porin channel. The absence of the loops mentioned above has a significant influence on the antigenic structure of the mutant porins as demonstrated using immunoblotting technique and ELISA.     

Effects of pH on structural and functional properties of porin from the outer membrane of <Emphasis Type="Italic">Yersinia pseudotuberculosis</Emphasis>. I. Functionally important conformational transitions of yersinin

The changes in the structural and functional properties of yersinin, a porin from the outer membrane of Yersinia pseudotuberculosis, were studied in the pH range 8.0–2.0 using SDs-PAGE, scanning microcalorimetry, optical spectroscopy and bilayer lipid membrane technique. It was found that in the pH range under study the changes in the spatial structure of yersinin were biphasic. In the first steps of pH titration (pH 8.0–4.5), porin underwent a series of conformational transitions, which did not affect the trimeric structure of its molecule. In the second step (pH 4.0–2.0), structural rearrangements led to dissociation of the protein trimers into monomers. It is noteworthy that complete unfolding of the polypeptide chain of the protein was not observed even at low values of pH. Thus, at pH 2.0 the conformational intermediate of the protein retained up to 50% of its regular secondary structure. Studies of current fluctuations in the bilayer lipid membrane revealed that in weakly acidic media the conductivity of yersinin pores was decreased by one order of magnitude. The most drastic changes in the conductivity of the model membrane were observed at pH 5.8, whereas a further decrease of pH to 5.0 resulted in the closure of porin channels. It was concluded that the observed changes in the pore-forming properties of yersinin in a narrow range of pH represent an early step in the adaptation of bacteria to the changing conditions of the environment and entail control over the biosynthesis of nonspecific porins. The pH-dependent changes in the structure and pore-forming properties of yersinin provide additional evidence in favor of conformational and functional plasticity of porins.     

Structure and function of pore-forming proteins from bacteria of the genus Yersinia: I. Isolation and a comparison of physicochemical properties and functional activity of Yersinia porins

The molecular organization and functional activity of porins isolated from the outer membrane (OM) of the Yersinia enterocolitica and three phylogenetically close nonpathogenic Yersinia species (Y. intermedia, Y. kristensenii, and Y. frederiksenii) cultured at 6–8°C were comparatively studied for the first time. The proteins were isolated in two molecular forms (trimeric and monomeric), and their spatial structures were characterized by the methods of optical spectroscopy, CD and intrinsic protein fluorescence. The studied porins were shown to belong to the β-structural proteins (they have 59–96% total β structures and 0–17% α helices). The spatial structures of the proteins were demonstrated to depend on the nature of the detergent used for solubilization. Unlike the enterobacterial pore-forming proteins, the porin trimers are less stable to sodium dodecyl sulfate (SDS). The spatial structures of the porins become more compact after the substitution of octyl β-D-glucoside for SDS: the content of β structures increases and the accessibility of Trp residues to solvent decreases. It was established with the use of the technique of bilayer lipid membranes that the functional properties of the porins are similar to those of the OmpF proteins of Gram-negative bacteria. Trimers are functionally active forms of the porins. Special features of the pore-forming activity of the Yersinia porins were revealed to depend on the microorganism species and the value of the membrane potential.     

Porins from marine bacteria of the genus Pseudoalteromonas (Gammaproteobacteria: Pseudoalteromonadaceae)

Outer membrane (OM) fractions were isolated from marine bacteria of the genus Pseudoalteromonas (P. haloplanktis, P. tetraodonis, and Pseudoalteromonas sp. KMM 223). The purity of OM fractions was confirmed by ultracentrifugation in a sucrose gradient. Using sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) and the bilayer lipid membrane (BLM) technique, heat-modifiable porin-like proteins were identified among the OM proteins of marine pseudomonads. The pore-forming P-1 and P-2 proteins with molecular masses of 43 and 39 kDa, respectively, were obtained from the marine bacterium P. haloplanktis. The nature of current fluctuations in the BLM and the conductivity of pores formed by these proteins suggest that these isolated porins are not identical in their functional properties. A nonlinear dependence of channel conductivity on salt concentration in the aqueous phase was found for the P-2 protein, which is typical of marine bacterial porins.     

Study of effect of substitution of the penultimate amino acid residue on expression,structure, and functional properties of Yersinia pseudotuberculosis OmpY porin

The purpose of the study was to compare the expression of two Yersinia pseudotuberculosis proteins, wild-type porin OmpY and the mutant porin OmpY designated as OmpY-Q having the uncharged amino acid residue Gln instead of positively charged Arg at the penultimate position in the same heterologous host. According to the literature, a similar substitution (Lys to Gln) of the penultimate amino acid residue in Neisseria meningitidis porin PorA drastically improved the assembly of the protein in the E. coli outer membrane in vivo. Site-directed mutagenesis was used to replace Arg by Gln (R338Q) in OmpY, and the conditions for optimal expression and maturation of OmpY-Q were selected. It was found that the growth rates of E. coli strains producing OmpY and OmpY-Q and the expression levels of the porins were approximately equal. Comparative analysis of recombinant OmpY and OmpY-Q did not show significant differences in structure, antigenic, and functional properties of the porins, or any noticeable effect of the R338Q substitution in OmpY on its assembly in the E. coli outer membrane in vivo. The probable causes of discrepancies between our results and the previous data on porin PorA are discussed considering the known mechanisms of biogenesis of porins at the periplasmic stage.     

A comparative analysis of the spatial structure of nonspecific porins from <Emphasis Type="Italic">Yersinia ruckeri</Emphasis> using optical spectroscopy and molecular modeling

The spatial organization of outer-membrane porins is studied by optical spectroscopy and molecular modeling. It was found that the OmpF and OmpC porins from Yеrsiniа ruckeri are β-structured membrane proteins typical of the pore-forming proteins of other Gram-negative bacteria. The spatial structures of monomers and trimers of the OmpC and OmpF porins from Y. ruckeri are simulated using methods of structural bioinformatics. It was found that the structural stability of the more thermostable OmpF trimer is sustained by a greater number of hydrogen bonds and hydrophobic interactions. The main differences of the spatial structures of the test porins are observed in the structure of their outer loops. There are three tryptophan residues in the molecules of the OmpC and OmpF porins of Y. ruckeri. It is demonstrated by moleculardynamics methods that after thermal denaturation the solvent accessibility of the Trp212 residue in OmpF porin increased by two times, while the solvent accessibility of a Trp184 residue in OmpC porin was not increased. It is hypothesized that the red-shifted tryptophan fluorescence spectrum of OmpF porin during thermal denaturation is due to the behavior of the Trp212 residue.     

OmpC-like porin from outer membrane of Yersinia enterocolitica: Molecular structure and functional activity

OmpC-like porin was isolated from the outer membrane (OM) of Yersinia enterocolitica cultured at 37°C (the “warm” variant) and its physicochemical and functional properties were studied. The amino acid sequence of OmpC porin was established, and the primary structure and transmembrane topology of this protein were analyzed in comparison with the OmpF porin isolated from Y. enterocolitica cultured at 6°C (the “cold” variant). Both porins of Y. enterocolitica had a high homology degree (65%) between themselves and with OmpC and OmpF porins from OM of Escherichia coli (58 and 76% homology, respectively). The secondary structure of OmpC and OmpF porins from OM of Y. enterocolitica consists of 16 β-strands connected by short “periplasmic” and longer “extracellular” loops with disordered structure, according to the topological model developed for porins of E. coli. The molecular structures of OmpC and OmpF porins of Y. enterocolitica have significant differences in the structure of the “extracellular” loops and in the position of one of three tryptophan residues. Using the bilayer lipid membrane (BLM) technique, pores formed by OmpC porin of Y. enterocolitica were shown to differ in electrophysiological characteristics from channels of OmpF protein of this microorganism. The isolated OmpC porin reconstructed into BLM displayed functional plasticity similarly to OmpF protein and nonspecific porins of other enterobacteria. The conductivity level of the channels formed by this protein in the BLM was regulated by value of the applied potential.     

The impact of length variations in the L2 loop on the structure and thermal stability of non-specific porins: The case of OmpCs from the Yersinia pseudotuberculosis complex

Porins are integral proteins of the outer membranes of gram-negative bacteria. In membranes, they exist as homotrimers and the L2 loops contribute to their stability. Comparison of OmpC porins of the Yersinia pseudotuberculosis complex with other enterobacterial porins demonstrated L2 loop length diversity, which is caused by varying numbers of dipeptide/tripeptide repeats. The OmpC porins are highly homologous to each other, and they can be subdivided into five isoforms based on their L2 loop structure. Optical spectroscopy and SDS-PAGE experiments revealed that particularities of the L2 loops affected the structure and thermal stability of the porins. Thermal denaturation studies showed that porins with shorter loops, compared to porins with longer loops, had more stable tertiary and less stable secondary and quaternary structures. According to our comparative modeling results, the L2 loops differ in their structure by adopting different spatial positions and forming different polar bonds with a neighbor monomer. The replacement of asparagine with arginine at the C-terminus of the L2 loop shifts the loop upwards and causes the loss of contacts with the arginine clusters within the pores. The increase in the length of these loops ensures that they shift down toward the pore and restore their contacts with arginines on the channel wall, as is the case in classical nonspecific porins. Despite the fact that the surface charge density varies considerably among the OmpC porins, the L2 loops form a typical negatively charged region in the center of the trimer.     

Molecular cloning, isolation, and properties of chaperone Skp from Yersinia pseudotuberculosis

The skp gene of Yersinia pseudotuberculosis was expressed without its signal sequence in Escherichia coli BL21(DE3) cells. The recombinant protein Skp accumulated in soluble form in the cytoplasm of the producer strain. The protein was isolated and characterized: the molecular weight, isoelectric point, N-terminal amino acid sequence (20 amino acid residues), and the content of the secondary structure elements were determined. Using cross-linking stabilization and high-mass MALDI-TOF mass spectrometric analysis, it was found that rSkp forms a stable homotrimer in solution and interacts with human IgG. Three-dimensional models of the Skp trimer and its complexes with Fc- and Fab-fragments of human IgG1 were constructed by computer modeling.     

Innate Immune Recognition of Yersinia pseudotuberculosis Type III Secretion

Specialized protein translocation systems are used by many bacterial pathogens to deliver effector proteins into host cells that interfere with normal cellular functions. How the host immune system recognizes and responds to this intrusive event is not understood. To address these questions, we determined the mammalian cellular response to the virulence-associated type III secretion system (T3SS) of the human pathogen Yersinia pseudotuberculosis. We found that macrophages devoid of Toll-like receptor (TLR) signaling regulate expression of 266 genes following recognition of the Y. pseudotuberculosis T3SS. This analysis revealed two temporally distinct responses that could be separated into activation of NFκB- and type I IFN-regulated genes. Extracellular bacteria were capable of triggering these signaling events, as inhibition of bacterial uptake had no effect on the ensuing innate immune response. The cytosolic peptidoglycan sensors Nod1 and Nod2 and the inflammasome component caspase-1 were not involved in NFκB activation following recognition of the Y. pseudotuberculosis T3SS. However, caspase-1 was required for secretion of the inflammatory cytokine IL-1β in response to T3SS-positive Y. pseudotuberculosis. In order to characterize the bacterial requirements for induction of this novel TLR-, Nod1/2-, and caspase-1-independent response, we used Y. pseudotuberculosis strains lacking specific components of the T3SS. Formation of a functional T3SS pore was required, as bacteria expressing a secretion needle, but lacking the pore-forming proteins YopB or YopD, did not trigger these signaling events. However, nonspecific membrane disruption could not recapitulate the NFκB signaling triggered by Y. pseudotuberculosis expressing a functional T3SS pore. Although host cell recognition of the T3SS did not require known translocated substrates, the ensuing response could be modulated by effectors such as YopJ and YopT, as YopT amplified the response, while YopJ dampened it. Collectively, these data suggest that combined recognition of the T3SS pore and YopBD-mediated delivery of immune activating ligands into the host cytosol informs the host cell of pathogenic challenge. This leads to a unique, multifactorial response distinct from the canonical immune response to a bacterium lacking a T3SS.     

Immunochemical characteristics of synthetic peptides with T-cellular and B-cellular epitopes of nonspecific porins of pathogenic <Emphasis Type="Italic">Yersinia</Emphasis>

Multiple antigenic peptides (MAPs) that included the common antigenic epitopes of porins from the outer membranes (OM) of bacteria from the Yersinia genus (Y. pseudotuberculosis, Y. enterocolitica, and Y. pestis that are pathogenic for humans) were synthesized. Mice of the BALB/c line were immunized with these peptides, and antisera to the peptides were obtained. It was demonstrated by EIA that these sera interacted with the porins that were isolated from the OM of pathogenic Yersinia. MAPs were shown to be bound to the antibodies in the blood sera of rabbits immunized with the individual porins and to the antibodies in the blood sera of humans suffering from intestinal yersiniosis and pseudotuberculosis.     

Identification of a Mycoloyl Transferase Selectively Involved in O-Acylation of Polypeptides in Corynebacteriales

We have previously described the posttranslational modification of pore-forming small proteins of Corynebacterium by mycolic acid, a very-long-chain α-alkyl and β-hydroxy fatty acid. Using a combination of chemical analyses and mass spectrometry, we identified the mycoloyl transferase (Myt) that catalyzes the transfer of the fatty acid residue to yield O-acylated polypeptides. Inactivation of corynomycoloyl transferase C (cg0413 [Corynebacterium glutamicum mytC {CgmytC}]), one of the six Cgmyt genes of C. glutamicum, specifically abolished the O-modification of the pore-forming proteins PorA and PorH, which is critical for their biological activity. Expectedly, complementation of the cg0413 mutant with either the wild-type gene or its orthologues from Corynebacterium diphtheriae and Rhodococcus, but not Nocardia, fully restored the O-acylation of the porins. Consistently, the three-dimensional structure of CgMytC showed the presence of a unique loop that is absent from enzymes that transfer mycoloyl residues onto both trehalose and the cell wall arabinogalactan. These data suggest the implication of this structure in the enzyme specificity for protein instead of carbohydrate.     

Porin Isolated from the Outer Membrane of <Emphasis Type="Italic">Erwinia amylovora</Emphasis> and Its Encoding Gene

A major Erwinia amylovora outer-membrane protein (Omp-EA) and the gene encoding for this protein (omp-EA) were isolated and characterized. The native Omp-EA protein forms a trimeric structure of approximately 114 kDa. This protein demonstrated high resistance to detergents such as SDS and octyl-glucopyranoside, but disaggregated to monomers with a molecular weight (MW) of approximately 39 kDa after heating at 95°C for 10 minutes in sample buffer. The pore-forming ability of the oligomeric Omp-EA was determined by the liposome swelling assay, demonstrating that the oligomeric protein formed nonspecific channels with an exclusion limit of approximately 660 Da. On dissociation, the monomers did not exhibit pore-forming ability. The omp-EA gene was cloned and sequenced (GenBank Accession No. DQ184680). Sequence analysis revealed an open reading frame of 1152 bases. The deduced amino-acid sequence had 383 amino acids. The mature protein consisted of 362 amino acids and had a calculated MW of 39,210 Da. Multiple-sequence alignment of Omp-EA with other porins from the Enterobacteriaceae family revealed 51% to 63% identity. The first 16 amino acids from the N-terminal exhibited the highest identity (100%) to the porins OmpC, OmpF, and PhoE of Escherichia coli. Two methods were used to predict the secondary structure: APSSP2 and Hidden and Markov’s model. The monomers of Omp-EA porin presented a topology of 16 transmembranal β-strands. The area of the loops between the β -strands was proposed. It is suggested that further research on the porin and its loops may be important for understanding the mechanism of E. amylovor to invade plant tissues.     

P66 porins are present in both Lyme disease and relapsing fever spirochetes: A comparison of the biophysical properties of P66 porins from six Borrelia species

The genus Borrelia is the cause of the two human diseases: Lyme disease (LD) and relapsing fever (RF). Both LD and RF Borrelia species are obligate parasites and are dependent on nutrients provided by their hosts. The first step of nutrient uptake across the outer membrane of these Gram-negative bacteria is accomplished by water-filled channels, so-called porins. The knowledge of the porin composition in the outer membranes of the different pathogenic Borrelia species is limited. Only one porin has been described in relapsing fever spirochetes to date, whereas four porins are known to be present in Lyme disease agents. From these, the Borrelia burgdorferi outer membrane channel P66 is known to act as an adhesin and was well studied as a porin. To investigate if P66 porins are expressed and similarly capable of pore formation in other Borrelia causing Lyme disease or relapsing fever three LD species (B. burgdorferi, B. afzelii, B. garinii) and three RF species (B. duttonii, B. recurrentis and B. hermsii) were investigated for outer membrane proteins homologous to P66. A search in current published RF genomes, comprising the ones of B. duttonii, B. recurrentis and B. hermsii, indicated that they all contained P66 homologues. The P66 homologues of the six Borrelia species were purified to homogeneity and their pore-forming abilities as well as the biophysical properties of the pores were analyzed using the black lipid bilayer assay.     

Structure and function of pore-forming proteins from bacteria of the genus Yersinia: I. Isolation and a comparison of physicochemical properties and functional activity of Yersinia porins

The molecular organization and functional activity of porins isolated from the outer membrane (OM) of the Yersinia enterocolitica and three phylogenetically close nonpathogenic Yersinia species (Y. intermedia, Y. kristensenii, and Y. frederiksenii) cultured at 6-8 degrees C were comparatively studied for the first time. The proteins were isolated in two molecular forms (trimeric and monomeric), and their spatial structures were characterized by the methods of optical spectroscopy, CD and intrinsic protein fluorescence. The studied porins were shown to belong to the beta-structural proteins (they have 59-96% total beta structures and 0-17% alpha helices). The spatial structures of the proteins were demonstrated to depend on the nature of the detergent used for solubilization. Unlike the enterobacterial pore-forming proteins, the porin trimers are less stable to sodium dodecyl sulfate (SDS). The spatial structures of the porins become more compact after the substitution of octyl beta-D-glucoside for SDS: the content of beta structures increases and the accessibility of Trp residues to solvent decreases. It was established with the use of the technique of bilayer lipid membranes that the functional properties of the porins are similar to those of the OmpF proteins of Gram-negative bacteria. Trimers are functionally active forms of the porins. Special features of the pore-forming activity of the Yersinia porins were revealed to depend on the microorganism species and the value of the membrane potential.     

Transmission of Yersinia pseudotuberculosis in the Pork Production Chain from Farm to Slaughterhouse

The transmission of Yersinia pseudotuberculosis in the pork production chain was followed from farm to slaughterhouse by studying the same 364 pigs from different production systems at farm and slaughterhouse levels. In all, 1,785 samples were collected, and the isolated Y. pseudotuberculosis strains were analyzed by pulsed-field gel electrophoresis. The results of microbial sampling were combined with data from an on-farm observation and questionnaire study to elucidate the associations between farm factors and the prevalence of Y. pseudotuberculosis. Following the same pigs in the production chain from farm to slaughterhouse, we were able to show similar Y. pseudotuberculosis genotypes in live animals, pluck sets (containing tongue, tonsils, esophagus, trachea, heart, lungs, diaphragm, liver, and kidneys), and carcasses and to conclude that Y. pseudotuberculosis contamination originates from the farms, is transported to slaughterhouses with pigs, and transfers to pluck sets and carcasses in the slaughter process. The study also showed that the high prevalence of Y. pseudotuberculosis in live pigs predisposes carcasses and pluck sets to contamination. When production types and capacities were compared, the prevalence of Y. pseudotuberculosis was higher in organic production than in conventional production and on conventional farms with high rather than low production capacity. We were also able to associate specific farm factors with the prevalence of Y. pseudotuberculosis by using a questionnaire and on-farm observations. On farms, contact with pest animals and the outside environment and a rise in the number of pigs on the farm appear to increase the prevalence of Y. pseudotuberculosis.