In Candida albicans, the Nim1 kinases Gin4 and Hsl1 negatively regulate pseudohypha formation and Gin4 also controls septin organization

In the development of hyphal germ tubes of Candida albicans, a band of septin forms at the base of the germ tube (basal septin band). Later, a septin ring forms, which organizes the first septum within the germ tube (septin ring). We have investigated the role of the Nim1 kinases, Gin4 and Hsl1, in the formation of these septin structures. We show that during germ tube formation, Gin4 is required for the organization of the septin ring but not the basal septin band. Hsl1 is not required for the formation of either septin rings or basal bands. Unexpectedly, we found that both gin4Delta and hsl1Delta mutants form pseudohyphae constitutively, in a fashion that in the case of gin4Delta, is partly independent of Swe1. Gin4-depleted pseudohyphae are unable to form hyphae when challenged with serum, but this can be overcome by ectopic expression of Gin4 from the MET3 promoter. Thus, Gin4 may regulate the developmental switch from pseudohyphae to hyphae.     

Influence of applied electrical fields on yeast and hyphal growth of Candida albicans

Yeast cells of Candida albicans which had been attached to polylysine-coated microscope slides were induced to form buds or germ tubes in the presence of external electrical fields. The sites of budding and germ tube formation and the growth of germ tubes and hyphal branches were polarized preferentially towards the cathode. Buds were not converted to pseudohyphae or germ tubes by the field and the field had no effect on the positioning of nuclei or septa in the yeast cell or germ tube. Buds were less polarized than germ tubes at any given applied voltage. The polarization of buds reached a peak at an electrical field of 12 mV per cell. Polarization of germ tubes was biphasic, increasing rapidly with increasing field strengths up to 5 mV per cell, and then more slowly in stronger fields. An electrical field was only required for a fraction of the time taken for germ tubes to start to form, so cells retained a memory of experiencing an electrical field which influenced the selection of sites of evagination. Increasing the electrical field delayed the time of germ tube evagination and inhibited the rate of germ tube extension. Unlike previous findings with other filamentous fungi, germ tubes grew unidirectionally towards the cathode for extended periods and did not deviate to a perpendicular orientation. This result suggests that the septal pore of the filamentous form may have high electrical resistance and would act as an effective barrier to solute transport between intercalary compartments.     

Speculative cell cycle in yeast-phase growth of Sporothrix schenckii: plasma membrane ultrastructure as revealed by freeze-fracture electron microscopy

The cell cycle in yeast-phase growth of Sporothrix schenckii was investigated by light microscopy and freeze-fracture electron microscopy after a 3- to 7-day cultivation on brain heart infusion agar medium at 37 degrees C. Mother yeastlike cells were able to bear daughter yeastlike cells. They were also able to produce germ tubes that had the potential to develop into pseudohyphae and hyphae. On the other hand, hyphae or pseudohyphae born from yeastlike cells were able to bear yeastlike cells directly. These results lead us to propose a hypothetical cell cycle for yeast-phase growth involving yeastlike vegetative cells, pseudohyphae, and hyphae.     

Candida albicans Int1p interacts with the septin ring in yeast and hyphal cells.

The ability to switch between yeast and hyphal morphologies is an important virulence factor for the opportunistic pathogen Candida albicans. Although the kinetics of appearance of the filamentous ring that forms at the incipient septum differ in yeast and cells forming hyphae (germ tubes) (), the molecular mechanisms that regulate this difference are not known. Int1p, a C. albicans gene product with similarity in its C terminus to Saccharomyces cerevisiae Bud4p, has a role in hyphal morphogenesis. Here we report that in S. cerevisiae, Int1p expression results in the growth of highly polarized cells with delocalized chitin and defects in cytokinesis and bud-site selection patterns, phenotypes that are also seen in S. cerevisiae septin mutant strains. Expression of high levels of Int1p in S. cerevisiae generated elaborate spiral-like structures at the periphery of the polarized cells that contained septins and Int1p. In addition, Int1p coimmunoprecipitated with the Cdc11p and Cdc12p septins, and Cdc12p is required for the establishment and maintenance of these Int1p/septin spirals. Although Swe1p kinase contributes to INT1-induced filamentous growth in S. cerevisiae, it is not required for the formation of ectopic Int1p/septin structures. In C. albicans, Int1p was important for the axial budding pattern and colocalized with Cdc3p septin in a ring at the mother-bud neck of yeast and pseudohyphal cells. Under conditions that induce hyphae, both Cdc3p and Int1p localized to a ring distal to the junction of the mother cell and germ tube. Thus, placement of the Int1p/septin ring with respect to the mother-daughter cell junction distinguishes yeast/pseudohyphal growth from hyphal growth in C. albicans.     

The mating projections of Saccharomyces cerevisiae and Candida albicans show key characteristics of hyphal growth

Fungi can grow in a variety of growth forms: yeast, pseudohyphae and hyphae. The human fungal pathogen Candida albicans can grow in all three of these forms. In this fungus, hyphal growth is distinguished by the presence of a Spitzenk?rper-like structure at the hyphal tip and a band of septin bars around the base of newly evaginated germ tubes. The budding yeast Saccharomyces cerevisiae grows as yeast and pseudohyphae, but is not normally considered to show hyphal growth. We show here that in mating projections of both C. albicans and S. cerevisiae a Spitzenk?rper-like structure is present at the growing tip and a band of septin bars is present at the base. Furthermore, in S. cerevisiae mating projections, Spa2 and Bni1 form a cap to the 3-dimensional ball of FM4-64 staining, exactly as previously observed in C. albicans hyphae, suggesting that the putative Spitzenk?rper may be a distinct structure from the polarisome. Taken together this work shows that mating projections of both S. cerevisiae and C. albicans show the key characteristics of hyphal growth.     

Septin function in Candida albicans morphogenesis

The septin proteins function in the formation of septa, mating projections, and spores in Saccharomyces cerevisiae, as well as in cell division and other processes in animal cells. Candida albicans septins were examined in this study for their roles in morphogenesis of this multimorphic, opportunistically pathogenic fungus, which can range from round budding yeast to elongated hyphae. C. albicans green fluorescent protein labeled septin proteins localized to a tight ring at the bud and pseudohyphae necks and as a more diffuse array in emerging germ tubes of hyphae. Deletion analysis demonstrated that the C. albicans homologs of the S. cerevisiae CDC3 and CDC12 septins are essential for viability. In contrast, the C. albicans cdc10Delta and cdc11Delta mutants were viable but displayed conditional defects in cytokinesis, localization of cell wall chitin, and bud morphology. The mutant phenotypes were not identical, however, indicating that these septins carry out distinct functions. The viable septin mutants could be stimulated to undergo hyphal morphogenesis but formed hyphae with abnormal curvature, and they differed from wild type in the selection of sites for subsequent rounds of hyphal formation. The cdc11Delta mutants were also defective for invasive growth when embedded in agar. These results further extend the known roles of the septins by demonstrating that they are essential for the proper morphogenesis of C. albicans during both budding and filamentous growth.     

Regulation of Cdc42 GTPase activity in the formation of hyphae in Candida albicans

The human fungal pathogen Candida albicans can switch between yeast, pseudohyphal, and hyphal morphologies. To investigate whether the distinctive characteristics of hyphae are due to increased activity of the Cdc42 GTPase, strains lacking negative regulators of Cdc42 were constructed. Unexpectedly, the deletion of the Cdc42 Rho guanine dissociation inhibitor RDI1 resulted in reduced rather than enhanced polarized growth. However, when cells lacking both Cdc42 GTPase-activating proteins, encoded by RGA2 and BEM3, were grown under pseudohyphal-promoting conditions the bud was highly elongated and lacked a constriction at its base, so that its shape resembled a hyphal germ tube. Moreover, a Spitzenk?rper was present at the bud tip, a band of disorganized septin was present at bud base, true septin rings formed within the bud, and nuclei migrated out of the mother cell before the first mitosis. These are all characteristic features of a hyphal germ tube. Intriguingly, we observed hyphal-specific phosphorylation of Rga2, suggesting a possible mechanism for Cdc42 activation during normal hyphal development. In contrast, expression of Cdc42(G12V), which is constitutively GTP bound because it lacks GTPase activity, resulted in swollen cells with prominent and stable septin bars. These results suggest the development of hyphal-specific characteristics is promoted by Cdc42-GTP in a process that also requires the intrinsic GTPase activity of Cdc42.     

Spatial Uncoupling of Mitosis and Cytokinesis during Appressorium-Mediated Plant Infection by the Rice Blast Fungus Magnaporthe oryzae

To infect plants, many pathogenic fungi develop specialized infection structures called appressoria. Here, we report that appressorium development in the rice blast fungus Magnaporthe oryzae involves an unusual cell division, in which nuclear division is spatially uncoupled from the site of cytokinesis and septum formation. The position of the appressorium septum is defined prior to mitosis by formation of a heteromeric septin ring complex, which was visualized by spatial localization of Septin4:green fluorescent protein (GFP) and Septin5:GFP fusion proteins. Mitosis in the fungal germ tube is followed by long-distance nuclear migration and rapid formation of an actomyosin contractile ring in the neck of the developing appressorium, at a position previously marked by the septin complex. By contrast, mutants impaired in appressorium development, such as Δpmk1 and ΔcpkA regulatory mutants, undergo coupled mitosis and cytokinesis within the germ tube. Perturbation of the spatial control of septation, by conditional mutation of the SEPTATION-ASSOCIATED1 gene of M. oryzae, prevented the fungus from causing rice blast disease. Overexpression of SEP1 did not affect septation during appressorium formation, but instead led to decoupling of nuclear division and cytokinesis in nongerminated conidial cells. When considered together, these results indicate that SEP1 is essential for determining the position and frequency of cell division sites in M. oryzae and demonstrate that differentiation of appressoria requires a cytokinetic event that is distinct from cell divisions within hyphae.     

Dynamics of septin ring and collar formation in Saccharomyces cerevisiae

Although the septin ring and collar in budding yeast were described over 20 years ago, there is still controversy regarding the organization of septin filaments within these structures and about the way in which the ring first forms and about how it converts into a collar at the mother-bud neck. Here we present quantitative analyses of the recruitment of fluorescently-tagged septins to the ring and collar through the cell cycle. Septin ring assembly began several minutes after polarity establishment and this interval was longer in daughter than in mother cells, suggesting asymmetric inheritance of septin regulators. Septins formed an initial faint and irregular ring, which became more regular as septins were recruited at a constant rate. This steady rate of septin recruitment continued for several minutes after the ring converted to a collar at bud emergence. We did not detect a stepwise change in septin fluorescence during the ring-to-collar transition. After collar formation, septins continued to accumulate at the bud neck, though at a reduced rate, until the onset of cytokinesis when the amount of neck-localized septins rapidly decreased. Implications for the mechanism of septin ring assembly are discussed.     

Cell cycle-regulated attachment of the ubiquitin-related protein SUMO to the yeast septins

SUMO is a ubiquitin-related protein that functions as a posttranslational modification on other proteins. SUMO conjugation is essential for viability in Saccharomyces cerevisiae and is required for entry into mitosis. We have found that SUMO is attached to the septins Cdc3, Cdc11, and Shs1/Sep7 specifically during mitosis, with conjugates appearing shortly before anaphase onset and disappearing abruptly at cytokinesis. Septins are components of a belt of 10-nm filaments encircling the yeast bud neck. Intriguingly, only septins on the mother cell side of the bud neck are sumoylated. We have identified four major SUMO attachment-site lysine residues in Cdc3, one in Cdc11, and two in Shs1, all within the consensus sequence (IVL)KX(ED). Mutating these sites eliminated the vast majority of bud neck-associated SUMO, as well as the bulk of total SUMO conjugates in G(2)/M-arrested cells, indicating that sumoylated septins are the most abundant SUMO conjugates at this point in the cell cycle. This mutant has a striking defect in disassembly of septin rings, resulting in accumulation of septin rings marking previous division sites. Thus, SUMO conjugation plays a role in regulating septin ring dynamics during the cell cycle.     

Hyphal Elongation Is Regulated Independently of Cell Cycle in Candida albicans

The mechanism for apical growth during hyphal morphogenesis in Candida albicans is unknown. Studies from Saccharomyces cerevisiae indicate that cell morphogenesis may involve cell cycle regulation by cyclin-dependent kinase. To examine whether this is the mechanism for hyphal morphogenesis, the temporal appearance of different spindle pole body and spindle structures, the cell cycle-regulated rearrangements of the actin cytoskeleton, and the phosphorylation state of the conserved Tyr19 of Cdc28 during the cell cycle were compared and found to be similar between yeast and serum-induced hyphal apical cells. These data suggest that hyphal elongation is not mediated by altering cell cycle progression or through phosphorylation of Tyr19 of Cdc28. We have also shown that germ tubes can evaginate before spindle pole body duplication, chitin ring formation, and DNA replication. Similarly, tip-associated actin polarization in each hypha occurs before the events of the G(1)/S transition and persists throughout the cell cycle, whereas cell cycle-regulated actin assemblies come and go. We have also shown that cells in phases other than G(1) can be induced to form hyphae. Hyphae induced from G(1) cells have no constrictions, and the first chitin ring is positioned in the germ tube at various distances from the base. Hyphae induced from budded cells have a constriction and a chitin ring at the bud neck, beyond which the hyphae continue to elongate with no further constrictions. Our data suggest that hyphal elongation and cell cycle morphogenesis programs are uncoupled, and each contributes to different aspects of cell morphogenesis.     

A Candida albicans Temperature-Sensitive cdc12-6 Mutant Identifies Roles for Septins in Selection of Sites of Germ Tube Formation and Hyphal Morphogenesis

Septins were identified for their role in septation in Saccharomyces cerevisiae and were subsequently implicated in other morphogenic processes. To study septins in Candida albicans hyphal morphogenesis, a temperature-sensitive mutation was created that altered the C terminus of the essential Cdc12 septin. The cdc12-6 cells grew well at room temperature, but at 37°C they displayed expected defects in septation, nuclear localization, and bud morphogenesis. Although serum stimulated the cdc12-6 cells at 37°C to form germ tube outgrowths, the mutant could not maintain polarized hyphal growth and instead formed chains of elongated cell compartments. Serum also stimulated the cdc12-6 mutant to induce a hyphal reporter gene (HWP1-GFP) and a characteristic zone of filipin staining at the leading edge of growth. Interestingly, cdc12-6 cells shifted to 37°C in the absence of serum gradually displayed enriched filipin staining at the tip, which may be due to the altered cell cycle regulation. A striking difference from the wild type was that the cdc12-6 cells frequently formed a second germ tube in close proximity to the first. The mutant cells also failed to form the diffuse band of septins at the base of germ tubes and hyphae, indicating that this septin band plays a role in preventing proximal formation of germ tubes in a manner analogous to bud site selection. These studies demonstrate that not only are septins important for cytokinesis, but they also promote polarized morphogenesis and selection of germ tube sites that may help disseminate an infection in host tissues.     

The septin AspB in Aspergillus nidulans forms bars and filaments and plays roles in growth emergence and conidiation

In yeast, septins form rings at the mother-bud neck and function as diffusion barriers. In animals, septins form filaments that can colocalize with other cytoskeletal elements. In the filamentous fungus Aspergillus nidulans there are five septin genes, aspA (an ortholog of Saccharomyces cerevisiae CDC11), aspB (an ortholog of S. cerevisiae CDC3), aspC (an ortholog of S. cerevisiae CDC12), aspD (an ortholog of S. cerevisiae CDC10), and aspE (found only in filamentous fungi). The aspB gene was previously reported to be the most highly expressed Aspergillus nidulans septin and to be essential. Using improved gene targeting techniques, we found that deletion of aspB is not lethal but results in delayed septation, increased emergence of germ tubes and branches, and greatly reduced conidiation. We also found that AspB-green fluorescent protein (GFP) localizes as rings and collars at septa, branches, and emerging layers of the conidiophore and as bars and filaments in conidia and hyphae. Bars are found in dormant and isotropically expanding conidia and in subapical nongrowing regions of hyphae and display fast movements. Filaments form as the germ tube emerges, localize to hyphal and branch tips, and display slower movements. All visible AspB-GFP structures are retained in ΔaspD and lost in ΔaspA and ΔaspC strains. Interestingly, in the ΔaspE mutant, AspB-GFP rings, bars, and filaments are visible in early growth, but AspB-GFP rods and filaments disappear after septum formation. AspE orthologs are only found in filamentous fungi, suggesting that this class of septins might be required for stability of septin bars and filaments in highly polar cells.     

SUMO modification of septin-interacting proteins in Candida albicans

The initiation of bud and hyphal growth in the opportunistic fungal pathogen Candida albicans both involve polarized morphogenesis. However, there are many differences including the function of the septin proteins, a family of proteins involved in membrane organization in a wide range of organisms. Septins form a characteristic ring on the inner surface of the plasma membrane at the bud neck, whereas the septins are diffusely localized across emerging hyphal tips. In addition, septin rings are maintained at sites of septum formation in hyphae rather than being disassembled immediately after cytokinesis. The possibility that C. albicans septins are regulated by the small ubiquitin-like protein SUMO was examined in this study because the Saccharomyces cerevisiae septins were shown previously to be modified by SUMO (Smt3p). However, SUMO conjugation to septins was not detected during budding or hyphal morphogenesis in C. albicans. These results are supported by the lack of conserved SUMO consensus motifs between septins from the two organisms even after adjusting the predicted Cdc3p and Cdc12p septin sequences to account for mRNA splicing in C. albicans. Interestingly, a homolog of the Smt3p SUMO was identified in the C. albicans genome, and an epitope tagged version of Smt3p was conjugated to a variety of proteins. Immunofluorescence analysis showed prominent Smt3p SUMO localization at bud necks and sites of septum formation in hyphae similar to the septins. However, Smt3p was primarily detected on the mother cell side of the septin ring. A subset of these Smt3p-modified proteins co-immunoprecipitated with the septin Cdc11p. These results indicate that septin-associated proteins and not the septins themselves are the key target of SUMO modification at the bud neck in C. albicans.     

Surface carbohydrates and cell wall structure of in vitro-induced uredospore infection structures ofUromyces viciae-fabae before and after treatment with enzymes and alkali

Summary Uredospores ofUromyces viciae-fabae differentiate to form germ tubes, appressoria, infection hyphae and haustorial mother cells on oil-containing collodion membranes. The cell walls of these infection structures were studied with the electron microscope and with FITC-labeled lectins before and after treatment with enzymes and inorganic solvents. Binding of the FITC-labeled lectins was measured with a microscope photometer. The enzymes pronase E, laminarinase, chitinase and lipase had different effects on each infection structure. Pronase treatment uncovered the chitin of germ tubes, appressoria and haustorial mother cells, but not of substomatal vesicles and infection hyphae. A mixture of - and -1,3-glucanase which also contained chitinase activity dissolved germ tubes and appressoria completely, but not infection pegs, substomatal vesicles, infection hyphae and haustorial mother cells. After treatment with laminarinase or lipase, an additional layer, which is especially obvious over the substomatal vesicle, infection hypha and haustorial mother cell, bound to LCA-FITC. In the wall of the haustorial mother cell, a ring, which surrounds the presumed infection peg, had strong affinity for WGA after protease and sodium hydroxide treatment. The infection structures have a fibrillar skeleton. The main constituent seems to be chitin. This skeleton is more dense or has a higher chitin content in the walls of appressoria and haustorial mother cells. The fibrils of the skeleton extend throughout the cell wall of the germ tube and appressorium. They are embedded within amorphous material of complex chemical composition (-1,3-glucan, -1,3-glucan, glycoprotein). The chitin of the infection peg, substomatal vesicle, infection hypha and haustorial mother cell is covered completely with this amorphous material. These results show, that each infection structure has distinct surface and wall characteristics. They may reflect the different tasks of the infection structures during host recognition and leaf penetration.Abbreviations AP appressorium - FITC fluorescein isothiocyanate - GT germ tube - HC haustorial mother cell - IH infection hypha - IP infection peg - LCA Lens culinaris agglutinin - n nucleus - neu neuramic acid - p pyranoside - R ring - s septum - SV substomatal vesicle - WGA wheat germ agglutinin     

Molecular and cellular events during the yeast to mycelium transition in Sporothrix schenckii

Unbudded singlets from exponentially growing yeast cells of Sporothrix schenckii were harvested, selected by filtration and allowed to form germ tubes in a basal medium with glucose at pH 4.0 and 25 degrees C. These conditions supported only the development of the mycelial form of S. schenckii in a reproducible manner which allowed further analysis of the early cellular events occurring during the yeast-to-mycelium transition. The relationship between macromolecular synthesis (DNA and RNA synthesis) and nuclear division, hyphal growth and septum formation were investigated during germ tube formation. RNA synthesis started 0 to 3 h after the induction of germ tube formation, followed by DNA synthesis and the first nuclear division, which took place between 3 and 6 h. Germ tube formation followed nuclear division and was first evidenced 6 h after the induction of germ tube formation, but was not completed until 12 h after inoculation. Septation was first observed in these germ tubes at the mother cell-germ tube junction 6 h after induction. Addition of hydroxyurea, an inhibitor of DNA synthesis, to the medium, also inhibited nuclear division and germ tube growth, suggesting that these processes in S. schenckii are dependent upon DNA synthesis.     

Septins have a dual role in controlling mitotic exit in budding yeast

In Saccharomyces cerevisiae, the spindle position checkpoint ensures that cells do not exit mitosis until the mitotic spindle moves into the mother/bud neck and thus guarantees that each cell receives one nucleus [1-6]. Mitotic exit is controlled by the small G protein Tem1p. Tem1p and its GTPase activating protein (GAP) Bub2p/Bfa1p are located on the daughter-bound spindle pole body. The GEF Lte1p is located in the bud. This segregation helps keep Tem1p in its inactive GDP state until the spindle enters the neck. However, the checkpoint functions without Lte1p and apparently senses cytoplasmic microtubules in the mother/bud neck [7-9]. To investigate this mechanism, we examined mutants defective for septins, which compose a ring at the neck [10]. We found that the septin mutants sep7Delta and cdc10Delta are defective in the checkpoint. When movement of the spindle into the neck was delayed, mitotic exit occurred, inappropriately leaving both nuclei in the mother. In sep7Delta and cdc10Delta mutants, Lte1p is mislocalized to the mother. In sep7Delta, but not cdc10Delta, mutants, inappropriate mitotic exit depends on Lte1p. These results suggest that septins serve as a diffusion barrier for Lte1p, and that Cdc10p is needed for the septin ring to serve as a scaffold for a putative microtubule sensor.     

Genetic interactions among regulators of septin organization

Septins form a cortical scaffold at the yeast mother-bud neck that restricts the diffusion of cortical proteins between the mother and bud and serves as a signaling center that is important for governing various cell functions. After cell cycle commitment in late G(1), septins are assembled into a narrow ring at the future bud site, which spreads to form a mature septin hourglass immediately after bud emergence. Although several septin regulators have been identified, it is unclear how they cooperate to assemble the septin scaffold. We have examined septin localization in isogenic strains containing single or multiple mutations in eight septin organization genes (CDC42, RGA1, RGA2, BEM3, CLA4, GIN4, NAP1, and ELM1). Our results suggest that these regulators act largely in parallel to promote either the initial assembly of the septin ring (CDC42, RGA1, RGA2, BEM3, and CLA4) or the conversion of the ring to a stable hourglass structure at the neck (GIN4, NAP1, and ELM1). Aberrant septin localization patterns in mutant strains could be divided into apparently discrete categories, but individual strains displayed heterogeneous defects, and there was no clear-cut correspondence between the specific mutations and specific categories of defect. These findings suggest that when they are deprived of their normal regulators, septin scaffolds collapse into a limited repertoire of aberrant states in which the nature of the mutant regulators influences the probability of a given aberrant state.     

Identification of Cell Cycle Dependent Interaction Partners of the Septins by Quantitative Mass Spectrometry

The septins are a conserved family of GTP-binding proteins that, in the baker''s yeast, assemble into a highly ordered array of filaments at the mother bud neck. These filaments undergo significant structural rearrangements during the cell cycle. We aimed at identifying key components that are involved in or regulate the transitions of the septins. By combining cell synchronization and quantitative affinity-purification mass-spectrometry, we performed a screen for specific interaction partners of the septins at three distinct stages of the cell cycle. A total of 83 interaction partners of the septins were assigned. Surprisingly, we detected DNA-interacting/nuclear proteins and proteins involved in ribosome biogenesis and protein synthesis predominantly present in alpha-factor arrested that do not display an assembled septin structure. Furthermore, two distinct sets of regulatory proteins that are specific for cells at S-phase with a stable septin collar or at mitosis with split septin rings were identified.Complementary methods like SPLIFF and immunoprecipitation allowed us to more exactly define the spatial and temporal characteristics of selected hits of the AP-MS screen.     

Detection of protein and carbohydrate in the extracellular matrix released byCochliobolus heterostrophus during germination

The extracellular matrix (ECM) ofCochliobolus heterostrophus (anamorph:Bipolaris maydis) was made visible by gold/silver and FITC-lectin staining at different stages of germ tube development. A proteinaceous material was released from conidia as germ tubes began to emerge and continued to be released from the germ tube tip throughout elongation. A material that did not stain for protein was observed to surround germ tubes upon their elongation. At later stages of maturation, germ tubes were surrounded by a sheath of proteinaceous material. After 15 h of incubation, staining with the FITC-labeled Concanavalin A revealed that a carbohydrate material surrounded and extended between hyphae. The ECM extract was separated into two fractions which were shown by SDS-PAGE and HPLC analyses to consist of proteins and carbohydrates. The results demonstrate that the composition and physical structure of the ECM change over time. Thus, the ECM is not a static material. Rather, the components of the ECM appear to be laid down at different stages of fungal morphogenesis, possibly related to germ tube emergence, elongation, and maturation.