Stabilization of the cold shock protein CspB from Bacillus subtilis by evolutionary optimization of Coulombic interactions

The bacterial cold shock proteins (Csp) are used by both experimentalists and theoreticians as model systems for analyzing the Coulombic contributions to protein stability. We employ Proside, a method of directed evolution, to identify stabilized variants of Bs-CspB from Bacillus subtilis. Proside links the increased protease resistance of stabilized protein variants to the infectivity of a filamentous phage. Here, three cspB libraries were used for in vitro selections to explore the stabilizing potential of charged amino acids in Bs-CspB. In the first library codons for nine selected surface residues were partially randomized, in the second one random mutations were introduced non-specifically by error-prone PCR, and in the third one the spontaneous mutation rate of the phage in Escherichia coli was used. Stabilizing mutations were found at the surface positions 1, 3, 46, 48, 65, and 66. The contributions of these mutations to stability were characterized by analyzing them individually and in combination. The best combination (M1R, E3K, K65I, and E66L) increased the midpoint of thermal unfolding of Bs-CspB from 53.8 to 85.0 degrees C. The effects of most mutations are strongly context dependent. A good example is provided by the E3R mutation. It is strongly stabilizing (DeltaDeltaGD=11.1kJ mol(-1)) in the wild-type protein, but destabilizing (DeltaDeltaGD=-4.0kJ mol(-1)) in the A46K/S48R/E66L variant. The stabilizations by charge mutations did not correlate well with the corresponding changes in the protein net charge, and they could not be ascribed to the formation of ion pairs. Previous theoretical analyses did not identify the stabilization caused by the mutations at positions 1, 46, and 48. Also, electrostatics calculations based on protein net charge or charge asymmetry did not predict well the stability changes that occur when charged residues in Bs-CspB are mutated. It remains a challenge to model the Coulombic interactions of charged residues in a protein and to determine their contributions to the Gibbs free energy of protein folding.     

Origins of the high stability of an in vitro-selected cold-shock protein

In previous work, we had identified stabilized forms of the cold-shock protein Bs-CspB from Bacillus subtilis in a combinatorial library by an in vitro selection procedure. In this library, the sequence positions 2, 3, 46, 64, 66, and 67 had been randomized, because Bs-CspB differs from the naturally thermostable homolog Bc-Csp from Bacillus caldolyticus, among others, at these six positions. For the most stable selected variant, the midpoint of thermal unfolding (tM) increased by 28.2 deg. C and the Gibbs free energy of unfolding (deltaG(D)) by 19 kJ/mol. Here, we analyzed by site-directed mutagenesis how the selected residues contribute individually to this strong stabilization. Val3 and Val66, which replace Glu3 and Glu66 of wild-type Bs-CspB, each contribute about 7 kJ/mol to stability, the Thr64Arg substitution contributes 4.5 kJ/mol, and 3.2 kJ/mol originate from the Ala46Leu replacement. Gly67 at the carboxy terminus is unimportant for stability, the Arg selected at position 2 is overall slightly destabilizing but improves the coulombic interactions. The best variant differs from Bc-Csp at all six positions; nevertheless, natural and in vitro selection followed similar principles. In both cases, negatively charged residues at the adjacent positions 3 and 66 are avoided, and a positively charged residue is introduced into this area of the protein surface. Its exact location is unimportant. It can be at position 3, as in the thermophilic Bc-Csp, or at positions 2 or 64, as in the most stable selected variant. These positively charged residues contribute to stability not by engaging in pairwise coulombic interactions with a specific carboxyl group, but by generally improving the charge distribution in this particular region of the protein surface. These coulombic effects contribute significantly to the thermostability of the cold-shock proteins. They are only weakly interdependent and best explained by the presence of a flexible ion network at the protein surface. Our results emphasize that surface positions are very good candidates for optimizing protein stability.     

Electrostatic stabilization of a thermophilic cold shock protein.

The cold shock protein Bc-Csp from the thermophile Bacillus caldolyticus differs from its mesophilic homolog Bs-CspB from Bacillus subtilis by 15.8 kJ mol(-1) in the Gibbs free energy of denaturation (DeltaG(D)). The two proteins vary in sequence at 12 positions but only two of them, Arg3 and Leu66 of Bc-Csp, which replace Glu3 and Glu66 of Bs-CspB, are responsible for the additional stability of Bc-Csp. These two positions are near the ends of the protein chain, but close to each other in the three-dimensional structure. The Glu3Arg exchange alone changed the stability by more than 11 kJ mol(-1). Here, we elucidated the molecular origins of the stability difference between the two proteins by a mutational analysis. Electrostatic contributions to stability were characterized by measuring the thermodynamic stabilities of many variants as a function of salt concentration. Double and triple mutant analyses indicate that the stabilization by the Glu3Arg exchange originates from three sources. Improved hydrophobic interactions of the aliphatic moiety of Arg3 contribute about 4 kJ mol(-1). Another 4 kJ mol(-1) is gained from the relief of a pairwise electrostatic repulsion between Glu3 and Glu66, as in the mesophilic protein, and 3 kJ mol(-1) originate from a general electrostatic stabilization by the positive charge of Arg3, which is not caused by a pairwise interaction. Mutations of all potential partners for an ion pair within a radius of 10 A around Arg3 had only marginal effects on stability. The Glu3-->Arg3 charge reversal thus optimizes ionic interactions at the protein surface by both local and global effects. However, it cannot convert the coulombic repulsion with another Glu residue into a corresponding attraction. Avoidance of unfavorable coulombic repulsions is probably a much simpler route to thermostability than the creation of stabilizing surface ion pairs, which can form only at the expense of conformational entropy.     

In vitro evolution of a hyperstable Gbeta1 variant

An in-vitro selection strategy was used to obtain strongly stabilized variants of the beta1 domain of protein G (Gbeta1). In a two-step approach, first candidate positions with a high potential for stabilization were identified in Gbeta1 libraries that were created by error-prone PCR, and then, after randomization of these positions by saturation mutagenesis, strongly stabilized variants were selected. For both steps the in-vitro selection method Proside was employed. Proside links the stability of a protein with the infectivity of a filamentous phage. Ultimately, residues from the two best selected variants were combined in a single Gbeta1 molecule. This variant with the four mutations E15V, T16L, T18I, and N37L showed an increase of 35.1 degrees C in the transition midpoint and of 28.5 kJ mol(-1) (at 70 degrees C) in the Gibbs free energy of stabilization. It was considerably more stable than the best variant from a previous Proside selection, in which positions were randomized that had originally been identified by computational design. Only a single substitution (T18I) was found in both selections. The best variants from the present selection showed a higher cooperativity of thermal unfolding, as indicated by an increase in the enthalpy of unfolding by about 60 kJ mol(-1). This increase is apparently correlated with the presence of Leu residues that were selected at the positions 16 and 37.     

Thermal stability and atomic-resolution crystal structure of the Bacillus caldolyticus cold shock protein

The bacterial cold shock proteins are small compact beta-barrel proteins without disulfide bonds, cis-proline residues or tightly bound cofactors. Bc-Csp, the cold shock protein from the thermophile Bacillus caldolyticus shows a twofold increase in the free energy of stabilization relative to its homolog Bs-CspB from the mesophile Bacillus subtilis, although the two proteins differ by only 12 out of 67 amino acid residues. This pair of cold shock proteins thus represents a good system to study the atomic determinants of protein thermostability. Bs-CspB and Bc-Csp both unfold reversibly in cooperative transitions with T(M) values of 49.0 degrees C and 77.3 degrees C, respectively, at pH 7.0. Addition of 0.5 M salt stabilizes Bs-CspB but destabilizes Bc-Csp. To understand these differences at the structural level, the crystal structure of Bc-Csp was determined at 1.17 A resolution and refined to R=12.5% (R(free)=17.9%). The molecular structures of Bc-Csp and Bs-CspB are virtually identical in the central beta-sheet and in the binding region for nucleic acids. Significant differences are found in the distribution of surface charges including a sodium ion binding site present in Bc-Csp, which was not observed in the crystal structure of the Bs-CspB. Electrostatic interactions are overall favorable for Bc-Csp, but unfavorable for Bs-CspB. They provide the major source for the increased thermostability of Bc-Csp. This can be explained based on the atomic-resolution crystal structure of Bc-Csp. It identifies a number of potentially stabilizing ionic interactions including a cation-binding site and reveals significant changes in the electrostatic surface potential.     

Electrostatic contributions to the stability of a thermophilic cold shock protein

The thermophilic Bacillus caldolyticus cold shock protein (Bc-Csp) differs from the mesophilic Bacillus subtilis cold shock protein B (Bs-CspB) in 11 of the 66 residues. Stability measurements of Schmid and co-workers have implicated contributions of electrostatic interactions to the thermostability. To further elucidate the physical basis of the difference in stability, previously developed theoretical methods that treat electrostatic effects in both the folded and the unfolded states were used in this paper to study the effects of mutations, ionic strength, and temperature. For 27 mutations that narrow the difference in sequence between Bc-Csp and Bs-CspB, calculated changes in unfolding free energy (Delta G) and experimental results have a correlation coefficient of 0.98. Bc-Csp appears to use destabilization of the unfolded state by unfavorable charge-charge interactions as a mechanism for increasing stability. Accounting for the effects of ionic strength and temperature on the electrostatic free energies in both the folded and the unfolded states, explanations for two important experimental observations are presented. The disparate ionic strength dependences of Delta G for Bc-Csp and Bs-CspB were attributed to the difference in the total charges (-2e and -6e, respectively). A main contribution to the much higher unfolding entropy of Bs-CspB was found to come from the less favorable electrostatic interactions in the folded state. These results should provide insight for understanding the thermostability of other thermophilic proteins.     

Thermodynamics of a diffusional protein folding reaction

The folding reactions of several proteins are well described as diffusional barrier crossing processes, which suggests that they should be analyzed by Kramers' rate theory rather than by transition state theory. For the cold shock protein Bc-Csp from Bacillus caldolyticus, we measured stability and folding kinetics, as well as solvent viscosity as a function of temperature and denaturant concentration. Our analysis indicates that diffusional folding reactions can be treated by transition state theory, provided that the temperature and denaturant dependence of the solvent viscosity is properly accounted for, either at the level of the measured rate constants or of the calculated activation parameters. After viscosity correction the activation barriers for folding become less enthalpic and more entropic. The transition from an enthalpic to an entropic folding barrier with increasing temperature is, however, apparent in the data before and after this correction. It is a consequence of the negative activation heat capacity of refolding, which is independent of solvent viscosity. Bc-Csp and its mesophilic homolog Bs-CspB from Bacillus subtilis differ strongly in stability but show identical enthalpic and entropic barriers to refolding. The increased stability of Bc-Csp originates from additional enthalpic interactions that are established after passage through the activated state. As a consequence, the activation enthalpy of unfolding is increased relative to Bs-CspB.     

残基突变对冷休克蛋白热稳定性影响的计算分析研究(英文)

残基突变是提高蛋白质热稳定性最直接有效的方式。在本文中,我们选取一对冷休克蛋白质作为研究对象,其中一个来自嗜温的Bacillus subtilis(Bs-CspB),另一个来自嗜热的Bacillus caldolyticus(Bc-Csp),这两个蛋白质在序列和结构上具有高度的相似性,但两者的耐热能力却相差很大。我们利用全原子模型计算残基突变前后蛋白质的自由能和氨基酸之间相互作用能的变化,分析残基突变对冷休克蛋白热稳定性的影响。通过对比两个蛋白质对应位置上残基的能量,我们成功鉴别出对Bc-Csp的高热稳定性有突出贡献的残基。我们计算了这些残基突变前后,该残基的静电相互作用和范德华相互作用的变化,以分析该残基对Bc-Csp高热稳定性的主要贡献。同时,我们分析了离子键对蛋白质热稳定性的贡献。我们的计算结果和实验结果吻合得很好,关键在于利用该方法可以详细地说明残基突变影响蛋白质热稳定性的根本原因。本文为研究残基突变对蛋白质热稳定性的影响提供了一种计算思路和方法,并有助于设计具有高耐热能力的蛋白质。     

Optimized variants of the cold shock protein from in vitro selection: structural basis of their high thermostability

The bacterial cold shock proteins (Csp) are widely used as models for the experimental and computational analysis of protein stability. In a previous study, in vitro evolution was employed to identify strongly stabilizing mutations in Bs-CspB from Bacillus subtilis. The best variant found by this approach contained the mutations M1R, E3K and K65I, which raised the midpoint of thermal unfolding of Bs-CspB from 53.8 degrees C to 83.7 degrees C, and increased the Gibbs free energy of stabilization by 20.9 kJ mol(-1). Another selected variant with the two mutations A46K and S48R was stabilized by 11.1 kJ mol(-1). To elucidate the molecular basis of these stabilizations, we determined the crystal structures of these two Bs-CspB variants. The mutated residues are generally well ordered and provide additional stabilizing interactions, such as charge interactions, additional hydrogen bonds and improved side-chain packing. Several mutations improve the electrostatic interactions, either by the removal of unfavorable charges (E3K) or by compensating their destabilizing interactions (A46K, S48R). The stabilizing mutations are clustered at a contiguous surface area of Bs-CspB, which apparently is critically important for the stability of the beta-barrel structure but not well optimized in the wild-type protein.     

Evolutionary protein stabilization in comparison with computational design

Two major strategies are currently used for stabilizing proteins: in vitro evolution and computational design. Here, we used gene libraries of the beta1 domain of the streptococcal protein G (Gbeta1) and Proside, an in vitro selection method, to identify stabilized variants of this protein. In the Gbeta1 libraries, the codons for the four boundary positions 16, 18, 25, and 29 were randomized. Many Gbeta1 variants with strongly increased thermal stabilities were found in 11 selections performed with five independent libraries. Previously, Mayo and co-workers used computational design to stabilize Gbeta1 by sequence optimization at the same positions. Their best variant ranked third within the panel of the selected variants. None of the ten computed sequences was found in the Proside selections, because several computed residues for positions 18 and 29 were not optimal for stability.     

Increased folding stability of TEM-1 beta-lactamase by in vitro selection

In vitro selections of stabilized proteins lead to more robust enzymes and, at the same time, yield novel insights into the principles of protein stability. We employed Proside, a method of in vitro selection, to find stabilized variants of TEM-1 β-lactamase from Escherichia coli. Proside links the increased protease resistance of stabilized proteins to the infectivity of a filamentous phage. Several libraries of TEM-1 β-lactamase variants were generated by error-prone PCR, and variants with increased protease resistance were obtained by raising temperature or guanidinium chloride concentration during proteolytic selections. Despite the small size of phage libraries, several strongly stabilizing mutations could be obtained, and a manual combination of the best shifted the profiles for thermal unfolding and temperature-dependent inactivation of β-lactamase by almost 20 °C to a higher temperature. The wild-type protein unfolds in two stages: from the native state via an intermediate of the molten-globule type to the unfolded form. In the course of the selections, the native protein was stabilized by 27 kJ mol^− 1 relative to the intermediate and the cooperativity of unfolding was strongly increased. Three of our stabilizing replacements (M182T, A224V, and R275L) had been identified independently in naturally occurring β-lactamase variants with extended substrate spectrum. In these variants, they acted as global suppressors of destabilizations caused by the mutations in the active site. The comparison between the crystal structure of our best variant and the crystal structure of the wild-type protein indicates that most of the selected mutations optimize helices and their packing. The stabilization by the E147G substitution is remarkable. It removes steric strain that originates from an overly tight packing of two helices in the wild-type protein. Such unfavorable van der Waals repulsions are not easily identified in crystal structures or by computational approaches, but they strongly reduce the conformational stability of a protein.     

A stable disulfide-free gene-3-protein of phage fd generated by in vitro evolution

Disulfide bonds provide major contributions to the conformational stability of proteins, and their cleavage often leads to unfolding. The gene-3-protein of the filamentous phage fd contains two disulfides in its N1 domain and one in its N2 domain, and these three disulfide bonds are essential for the stability of this protein. Here, we employed in vitro evolution to generate a disulfide-free variant of the N1-N2 protein with a high conformational stability. The gene-3-protein is essential for the phage infectivity, and we exploited this requirement for a proteolytic selection of stabilized protein variants from phage libraries. First, optimal replacements for individual disulfide bonds were identified in libraries, in which the corresponding cysteine codons were randomized. Then stabilizing amino acid replacements at non-cysteine positions were selected from libraries that were created by error-prone PCR. This stepwise procedure led to variants of N1-N2 that are devoid of all three disulfide bonds but stable and functional. The best variant without disulfide bonds showed a much higher conformational stability than the disulfide-containing wild-type form of the gene-3-protein. Despite the loss of all three disulfide bonds, the midpoints of the thermal transitions were increased from 48.5 degrees C to 67.0 degrees C for the N2 domain and from 60.0 degrees C to 78.7 degrees C for the N1 domain. The major loss in conformational stability caused by the removal of the disulfides was thus over-compensated by strongly improved non-covalent interactions. The stabilized variants were less infectious than the wild-type protein, probably because the domain mobility was reduced. Only a small fraction of the sequence space could be accessed by using libraries created by error-prone PCR, but still many strongly stabilized variants could be identified. This is encouraging and indicates that proteins can be stabilized by mutations in many different ways.     

Evolutionary stabilization of the gene-3-protein of phage fd reveals the principles that govern the thermodynamic stability of two-domain proteins

The gene-3-protein (G3P) of filamentous phage is essential for their propagation. It consists of three domains. The CT domain anchors G3P in the phage coat, the N2 domain binds to the F pilus of Escherichia coli and thus initiates infection, and the N1 domain continues by interacting with the TolA receptor. Phage are thus only infective when the three domains of G3P are tightly linked, and this requirement is exploited by Proside, an in vitro selection method for proteins with increased stability. In Proside, a repertoire of variants of the protein to be stabilized is inserted between the N2 and the CT domains of G3P. Stabilized variants can be selected because they resist cleavage by a protease and thus maintain the essential linkage between the domains. The method is limited by the proteolytic stability of G3P itself. We improved the stability of G3P by subjecting the phage without a guest protein to rounds of random in vivo mutagenesis and proteolytic Proside selections. Variants of G3P with one to four mutations were selected, and the temperature at which the corresponding phage became accessible for a protease increased in a stepwise manner from 40 degrees C to almost 60 degrees C. The N1-N2 fragments of wild-type gene-3-protein and of the four selected variants were purified and their stabilities towards thermal and denaturant-induced unfolding were determined. In the biphasic transitions of these proteins domain dissociation and unfolding of N2 occur in a concerted reaction in the first step, followed by the independent unfolding of domain N1 in the second step. N2 is thus less stable than N1, and it unfolds when the interactions with N1 are broken. The strongest stabilizations were caused by mutations in domain N2, in particular in its hinge subdomain, which provides many stabilizing interactions between the N1 and N2 domains. These results reveal how the individual domains and their assembly contribute to the overall stability of two-domain proteins and how mutations are optimally placed to improve the stability of such proteins.     

Impacts of the charged residues mutation S48E/N62H on the thermostability and unfolding behavior of cold shock protein: insights from molecular dynamics simulation with Gō model

The cold shock protein from the hyperthermophile Thermotoga maritima (Tm-Csp) exhibits significantly higher thermostability than its homologue from the thermophile Bacillus caldolyticus (Bc-Csp). Experimental studies have shown that the electrostatic interactions unique to Tm-Csp are responsible for improving its thermostability. In the present work, the favorable charged residues in Tm-Csp were grafted into Bc-Csp by a double point mutation of S48E/N62H, and the impacts of the mutation on the thermostability and unfolding/folding behavior of Bc-Csp were then investigated by using a modified Gō model, in which the electrostatic interactions between charged residues were considered in the model. Our simulation results show that this Tm-Csp-like charged residue mutation can effectively improve the thermostability of Bc-Csp without changing its two-state folding mechanism. Besides that, we also studied the unfolding kinetics and unfolding/folding pathway of the wild-type Bc-Csp and its mutant. It is found that this charged residue mutation obviously enhanced the stability of the C-terminal region of Bc-Csp, which decreases the unfolding rate and changes the unfolding/folding pathway of the protein. Our studies indicate that the thermostability, unfolding kinetics and unfolding/folding pathway of Bc-Csp can be artificially changed by introducing Tm-Csp-like favorable electrostatic interactions into Bc-Csp.

Open image in new window

Graphical abstract Tertiary structure of wild-type cold shock protein from the thermophile Bacillus caldolyticus

     

Role of the chain termini for the folding transition state of the cold shock protein.

Residues Arg3 and Leu66 are crucially important for the enhanced stability of the cold shock protein Bc-Csp from the thermophile Bacillus caldolyticus relative to its homologue Bs-CspB from the mesophile Bacillus subtilis. Arg3, which replaces Glu3 of Bs-CspB, accounts for two-thirds of the stability difference and for the entire difference in Coulombic interactions between the two proteins. Leu66, which replaces Glu66 of Bs-CspB, contributes additional hydrophobic interactions. To elucidate the role of these two residues near the chain termini for the rapid folding of the cold shock proteins, we performed an extensive mutational analysis of the folding kinetics to characterize interactions between residues 3, 46, and 66 in the transition state of folding. We employed a pressure-jump apparatus which allows folding to be followed over a broad range of temperatures and urea concentrations in the time range of microseconds to minutes. The N-terminal region folds early, and the interactions that originate from residue 3 are present to a large extent in the transition state already. They include a hydrophobic contribution, a general electrostatic stabilization by the positive charge of Arg3 in Bc-Csp, and a pairwise Coulombic repulsion with Glu46 in the Arg3Glu variant. The C-terminus appears to be largely unfolded in the transition state. The interactions of Leu66, including those with the already structured N-terminal region, are established only after passage through the transition state. The N- and C-termini of the cold shock proteins thus contribute differently to the folding kinetics, although they are very close in space in the folded protein.     

Directed evolution converts subtilisin E into a functional equivalent of thermitase

We used directed evolution to convert Bacillus subtilis subtilisin E into an enzyme functionally equivalent to its thermophilic homolog thermitase from Thermoactinomyces vulgaris. Five generations of random mutagenesis, recombination and screening created subtilisin E 5-3H5, whose half-life at 83 degrees C (3.5 min) and temperature optimum for activity (Topt, 76 degrees C) are identical with those of thermitase. The Topt of the evolved enzyme is 17 degrees C higher and its half-life at 65 degrees C is >200 times that of wild-type subtilisin E. In addition, 5-3H5 is more active towards the hydrolysis of succinyl-Ala-Ala-Pro-Phe-p-nitroanilide than wild-type at all temperatures from 10 to 90 degrees C. Thermitase differs from subtilisin E at 157 amino acid positions. However, only eight amino acid substitutions were sufficient to convert subtilisin E into an enzyme equally thermostable. The eight substitutions, which include known stabilizing mutations (N218S, N76D) and also several not previously reported, are distributed over the surface of the enzyme. Only two (N218S, N181D) are found in thermitase. Directed evolution provides a powerful tool to unveil mechanisms of thermal adaptation and is an effective and efficient approach to increasing thermostability without compromising enzyme activity.     

Stabilizing proteins from sequence statistics: the interplay of conservation and correlation in triosephosphate isomerase stability

Understanding the determinants of protein stability remains one of protein science's greatest challenges. There are still no computational solutions that calculate the stability effects of even point mutations with sufficient reliability for practical use. Amino acid substitutions rarely increase the stability of native proteins; hence, large libraries and high-throughput screens or selections are needed to stabilize proteins using directed evolution. Consensus mutations have proven effective for increasing stability, but these mutations are successful only about half the time. We set out to understand why some consensus mutations fail to stabilize, and what criteria might be useful to predict stabilization more accurately. Overall, consensus mutations at more conserved positions were more likely to be stabilizing in our model, triosephosphate isomerase (TIM) from Saccharomyces cerevisiae. However, positions coupled to other sites were more likely not to stabilize upon mutation. Destabilizing mutations could be removed both by removing sites with high statistical correlations to other positions and by removing nearly invariant positions at which "hidden correlations" can occur. Application of these rules resulted in identification of stabilizing mutations in 9 out of 10 positions, and amalgamation of all predicted stabilizing positions resulted in the most stable yeast TIM variant we produced (+8 °C). In contrast, a multimutant with 14 mutations each found to stabilize TIM independently was destabilized by 2 °C. Our results are a practical extension to the consensus concept of protein stabilization, and they further suggest the importance of positional independence in the mechanism of consensus stabilization.     

Thermostable Bacillus subtilis lipases: in vitro evolution and structural insight

In vitro evolution methods are now being routinely used to identify protein variants with novel and enhanced properties that are difficult to achieve using rational design. However, one of the limitations is in screening for beneficial mutants through several generations due to the occurrence of neutral/negative mutations occurring in the background of positive ones. While evolving a lipase in vitro from mesophilic Bacillus subtilis to generate thermostable variants, we have designed protocols that combine stringent three-tier testing, sequencing and stability assessments on the protein at the end of each generation. This strategy resulted in a total of six stabilizing mutations in just two generations with three mutations per generation. Each of the six mutants when evaluated individually contributed additively to thermostability. A combination of all of them resulted in the best variant that shows a remarkable 15 °C shift in melting temperature and a millionfold decrease in the thermal inactivation rate with only a marginal increase of 3 kcal mol⁻¹ in free energy of stabilization. Notably, in addition to the dramatic shift in optimum temperature by 20 °C, the activity has increased two- to fivefold in the temperature range 25-65 °C. High-resolution crystal structures of three of the mutants, each with 5° increments in melting temperature, reveal the structural basis of these mutations in attaining higher thermostability. The structures highlight the importance of water-mediated ionic networks on the protein surface in imparting thermostability. Saturation mutagenesis at each of the six positions did not result in enhanced thermostability in almost all the cases, confirming the crucial role played by each mutation as revealed through the structural study. Overall, our study presents an efficient strategy that can be employed in directed evolution approaches employed for obtaining improved properties of proteins.     

Use of amber suppressors to investigate the thermostability of Bacillus licheniformis alpha-amylase. Amino acid replacements at 6 histidine residues reveal a critical position at His-133

A set of 12 Escherichia coli suppressor tRNAs, inserting different amino acids in response to an amber codon, has been used to create rapidly numerous protein variants of a thermostable amylase; by site-directed mutagenesis, amber mutations were first introduced into Bacillus licheniformis alpha-amylase gene at position His35, His133, His247, His293, His406, or His450; genes carrying one or two amber mutations were then expressed in the different suppressor strains, generating over 100 amylase variants with predicted amino acid changes that could be tested for thermostability. Within the detection limits of the assays, amino acid replacements at five histidine positions had no significant effect. In contrast, suppressed variants substituted at residue His133 clearly exhibited modified thermostability and could be either less stable or more stable than the wild-type amylase, depending on the amino acid inserted at this position; comparison of the variants indicates that the hydrophobicity of the substituting residue is an important but not a determinant factor of stabilization. The effect of the most stabilizing and destabilizing amino acid substitutions, His133 to Tyr and to Pro, respectively, were confirmed by introducing the corresponding missense mutations into the gene sequence. The advantages and limits of informational suppression in protein stability studies are discussed as well as structural features involved in the thermostability of B. licheniformis alpha-amylase.