A dual protease approach for expression and affinity purification of recombinant proteins

We describe a new method for affinity purification of recombinant proteins using a dual protease protocol. Escherichia coli maltose binding protein (MBP) is employed as an N-terminal tag to increase the yield and solubility of its fusion partners. The MBP moiety is then removed by rhinovirus 3C protease, prior to purification, to yield an N-terminally His₆-tagged protein. Proteins that are only temporarily rendered soluble by fusing them to MBP are readily identified at this stage because they will precipitate after the MBP tag is removed by 3C protease. The remaining soluble His₆-tagged protein, if any, is subsequently purified by immobilized metal affinity chromatography (IMAC). Finally, the N-terminal His₆ tag is removed by His₆-tagged tobacco etch virus (TEV) protease to yield the native recombinant protein, and the His₆-tagged contaminants are removed by adsorption during a second round of IMAC, leaving only the untagged recombinant protein in the column effluent. The generic strategy described here saves time and effort by removing insoluble aggregates at an early stage in the process while also reducing the tendency of MBP to “stick” to its fusion partners during affinity purification.     

Soluble expression in Escherichia coli,purification and characterization of a human TF-1 cell apoptosis-related protein TFAR19

A novel human TF-1 cell apoptosis-related protein, TFAR19, cloned from a human leukemia cell line, TF-1, was first overexpressed in Escherichia coli with the sequence Met-Gly-His(6)-Gly-Thr-Asn-Gly, a hexahistidine sequence followed by a hydroxylamine cleavage site attached to its amino terminus. The resulting protein was soluble and single-step purified to homogeneity by metal chelating affinity chromatography. After cleavage of the purified His(6)-tagged TFAR19 sample with hydroxylamine, highly purified untagged TFAR19 protein was then obtained through an FPLC Resource Q column. The structural characteristics and function of the His(6)-tagged and untagged TFAR19 proteins were studied using circular dichroism, intrinsic fluorescence, and ANS-binding fluorescence spectra and apoptosis activity assay. The results show that alpha-helix is the main secondary structure of the proteins and the two forms of TFAR19 protein fold properly, which correspond well to their apoptosis activity expression. The results also indicate that the extra sequence including the His(6)-tag fused to the N-terminus of TFAR19 protein has a minimal effect on its structure and function, suggesting that the His(6)-tagged TFAR19 protein could be further used as an immobilized target for finding potential proteins which interact with TFAR19 from a cDNA library using in vitro ribosome display technique.     

High-Level Expression of Soluble Protein inEscherichia coliUsing a His6-Tag and Maltose-Binding-Protein Double-Affinity Fusion System

Using the maltose-binding protein (MBP) fusion vector pMAL-c1 from C. V. Mainaet al.(1988,Gene74, 365–373), we have constructed expression vectors which contain a sequence encoding six consecutive histidine residues (His₆-tag) at the 3′ end of the MBP-encoding malE gene which is followed by either a thrombin-binding site (LVPRGS) or a factor Xa-binding site (IEGR). The benefits of this approach include: (a) high expression levels of soluble MBP fusion proteins (exceeding 2% of the total cellular protein), (b) high-quality purification of proteins under various conditions (high salt, low salt, denaturing, nondenaturing, etc.), and (c) two alternative protease cleavage sites to test for the most efficient cleavage of each fusion protein. We also constructed these MBP–His₆-tag expression vectors with alternative selection markers (Amp^r, Kan^r) and alternative promoters (tac, T7). Using these constructs, we expressed and purified several proteins of which we present two, penicillin-binding protein PBP2a and UDP-N-acetylmuramate:l-alanine ligase (MurC), and compare their expression level and purity with other expression systems. We also discuss the use of minimal media with supplements versus rich media and cell growth strategies to optimize the protein yield in general and for isotope labeling.     

Simplified,Enhanced Protein Purification Using an Inducible,Autoprocessing Enzyme Tag

We introduce a new method for purifying recombinant proteins expressed in bacteria using a highly specific, inducible, self-cleaving protease tag. This tag is comprised of the Vibrio cholerae MARTX toxin cysteine protease domain (CPD), an autoprocessing enzyme that cleaves exclusively after a leucine residue within the target protein-CPD junction. Importantly, V. cholerae CPD is specifically activated by inositol hexakisphosphate (InsP₆), a eukaryotic-specific small molecule that is absent from the bacterial cytosol. As a result, when His₆-tagged CPD is fused to the C-terminus of target proteins and expressed in Escherichia coli, the full-length fusion protein can be purified from bacterial lysates using metal ion affinity chromatography. Subsequent addition of InsP₆ to the immobilized fusion protein induces CPD-mediated cleavage at the target protein-CPD junction, releasing untagged target protein into the supernatant. This method condenses affinity chromatography and fusion tag cleavage into a single step, obviating the need for exogenous protease addition to remove the fusion tag(s) and increasing the efficiency of tag separation. Furthermore, in addition to being timesaving, versatile, and inexpensive, our results indicate that the CPD purification system can enhance the expression, integrity, and solubility of intractable proteins from diverse organisms.     

Comparative expression study to increase the solubility of cold adapted Vibrio proteins in Escherichia coli

Functional and structural studies require gene overexpression and purification of soluble proteins. We wanted to express proteins from the psychrophilic bacterium Vibrio salmonicida in Escherichia coli, but encountered solubility problems. To improve the solubility of the proteins, we compared the effects of six N-terminal fusion proteins (Gb1, Z, thioredoxin, GST, MBP and NusA) and an N-terminal His6-tag. The selected test set included five proteins from the fish pathogen V. salmonicida and two related products from the mesophilic human pathogen Vibrio cholerae. We tested the expression in two different expression strains and at three different temperatures (16, 23 and 37 degrees C). His6-tag was the least effective tag, and these vector constructs were also difficult to transform. MBP and NusA performed best, expressing soluble proteins with all fusion partners in at least one of the cell types. In some cases MBP, GST and thioredoxin fusions resulted in products of incorrect size. The effect of temperature is complex: in most cases level of expression increased with temperature, whereas the effect on solubility was opposite. We found no clear connection between the preferred expression temperature of the protein and the temperature of the original host organism's natural habitat.     

Screening methods to determine biophysical properties of proteins in structural genomics

We have developed and tested a simple and efficient protein purification method for biophysical screening of proteins and protein fragments by nuclear magnetic resonance (NMR) and optical methods, such as circular dichroism spectroscopy. The method constitutes an extension of previously described protocols for gene expression and protein solubility screening [M. Hammarstr?m et al., (2002), Protein Science 11, 313]. Using the present purification scheme it is possible to take several target proteins, produced as fusion proteins, from cell pellet to NMR spectrum and obtain a judgment on the suitability for further structural or biophysical studies in less than 1 day. The method is independent of individual protein properties as long as the target protein can be produced in soluble form with a fusion partner. Identical procedures for cell culturing, lysis, affinity chromatography, protease cleavage, and NMR sample preparation then initially require only optimization for different fusion partner and protease combinations. The purification method can be automated, scaled up or down, and extended to a traditional purification scheme. We have tested the method on several small human proteins produced in Escherichia coli and find that the method allows for detection of structured proteins and unfolded or molten globule-like proteins.     

Gateway vectors for the production of combinatorially-tagged His6-MBP fusion proteins in the cytoplasm and periplasm of Escherichia coli

Many proteins that accumulate in the form of insoluble aggregates when they are overproduced in Escherichia coli can be rendered soluble by fusing them to E. coli maltose binding protein (MBP), and this will often enable them to fold in to their biologically active conformations. Yet, although it is an excellent solubility enhancer, MBP is not a particularly good affinity tag for protein purification. To compensate for this shortcoming, we have engineered and successfully tested Gateway destination vectors for the production of dual His6MBP-tagged fusion proteins in the cytoplasm and periplasm of E. coli. The MBP moiety improves the yield and solubility of its fusion partners while the hexahistidine tag (His-tag) serves to facilitate their purification. The availability of a vector that targets His6MBP fusion proteins to the periplasm expands the utility of this dual tagging approach to include proteins that contain disulfide bonds or are toxic in the bacterial cytoplasm.     

Expression of membrane proteins from Mycobacterium tuberculosis in Escherichia coli as fusions with maltose binding protein

Sixteen of 22 low molecular weight integral membrane proteins from Mycobacterium tuberculosis with previously poor or undetectable levels of expression were expressed in Escherichia coli as fusions with both the maltose binding protein (MBP) and a His(8)-tag. Sixty-eight percent of targeted proteins were expressed in high yield (>30 mg/L) in soluble and/or inclusion body form. Thrombin cleavage of the MBP fusion protein was successful for 10 of 13 proteins expressed as soluble proteins and for three proteins expressed only as inclusion bodies. The use of autoinduction growth media increased yields over Luria-Bertani (LB) growth media in 75% of the expressed proteins. Expressing integral membrane proteins with yields suitable for structural studies from a set of previously low and non-expressing proteins proved highly successful upon attachment of the maltose binding protein as a fusion tag.     

An improved SUMO fusion protein system for effective production of native proteins

Expression of recombinant proteins as fusions with SUMO (small ubiquitin-related modifier) protein has significantly increased the yield of difficult-to-express proteins in Escherichia coli. The benefit of this technique is further enhanced by the availability of naturally occurring SUMO proteases, which remove SUMO from the fusion protein. Here we have improved the exiting SUMO fusion protein approach for effective production of native proteins. First, a sticky-end PCR strategy was applied to design a new SUMO fusion protein vector that allows directional cloning of any target gene using two universal cloning sites (Sfo1 at the 5'-end and XhoI at the 3'-end). No restriction digestion is required for the target gene PCR product, even the insert target gene contains a SfoI or XhoI restriction site. This vector produces a fusion protein (denoted as His(6)-Smt3-X) in which the protein of interest (X) is fused to a hexahistidine (His(6))-tagged Smt3. Smt3 is the yeast SUMO protein. His(6)-Smt3-X was purified by Ni(2+) resin. Removal of His(6)-Smt3 was performed on the Ni(2+) resin by an engineered SUMO protease, His(6)-Ulp1(403-621)-His(6). Because of its dual His(6) tags, His(6)-Ulp1(403-621)-His(6) exhibits a high affinity for Ni(2) resin and associates with Ni(2+) resin after cleavage reaction. One can carry out both fusion protein purification and SUMO protease cleavage using one Ni(2+)-resin column. The eluant contains only the native target protein. Such a one-column protocol is useful in developing a better high-throughput platform. Finally, this new system was shown to be effective for cloning, expression, and rapid purification of several difficult-to-produce authentic proteins.     

Highly-efficient purification of native polyhistidine-tagged proteins by multivalent NTA-modified magnetic nanoparticles

A new bis-nitrilotriacetic acid (NTA) chelate with catechol anchor was synthesized and immobilized on superparamagnetic iron oxide nanoparticles. When loaded with Ni(II), these bis-NTA-immobilized nanoparticles were shown to bind polyhistidine (His x 6-tagged) fusion proteins in their native, folded conformations that commercial microbeads failed to bind under identical conditions. Control experiments with a mono-NTA chelate immobilized on iron oxide nanoparticles indicate a similarly high affinity for His x 6-tagged native proteins, suggesting that the high density of the mono-NTA chelate presented by the nanoparticles allows the binding of the His x 6-tag to more than one Ni-NTA moiety on the surface. This study shows that the multivalency strategy can be utilized to enhance the binding of His x 6-tagged proteins in their native, folded conformations. We further demonstrated the selective purification of His x 6-tagged proteins from crude cell lysates by using the Ni(II)-loaded iron oxide nanoparticles. The present platform is capable of efficient purification of His x 6-tagged proteins that are expressed at low levels in mammalian cells. This work thus presents a novel nanoparticle-based high-capacity protein purification system with shorter incubation times, proportionally large washes, and significantly smaller elution volumes compared to commercially available microbeads.     

Expression of the murine leukemia virus protease in fusion with maltose-binding protein in Escherichia coli

The protease of murine leukemia virus (MLV) was cloned into pMal-c2 vector, expressed in fusion with maltose-binding protein (MBP), and purified to homogeneity after Factor Xa cleavage of the chimeric protein. Substantial degradation of the fusion protein was observed during expression, which severely diminished the yield. The degree of degradation of the fusion protein was even more pronounced when a single-chain form of the MLV protease was cloned after the gene coding for MBP. To increase the yield, a hexahistidine tag with an additional Factor Xa cleavage site was cloned after the protease and nickel chelate affinity chromatography was used as the first purification step. The modified procedure resulted in substantially higher yield as compared to the original procedure. The degradation of hexahistidine-tagged active site mutant MLV protease was very low and comparable to that obtained with hexahistidine-tagged MBP, but purified MLV protease alone was not able to degrade purified MBP, suggesting that during expression the active MLV protease may activate bacterial proteases which appear to be responsible for the degradation of the fusion proteins.     

High-throughput Purification and Quality Assurance of Arabidopsis thaliana Proteins for Eukaryotic Structural Genomics

The Center for Eukaryotic Structural Genomics (CESG) has established procedures for the purification of Arabidopsis proteins in a high-throughput mode. Recombinant proteins were fused with (His)(6)-MBP tags at their N-terminus and expressed in Escherichia coli. Using an automated AKTApurifier system, fusion proteins were initially purified by immobilized metal affinity chromatography (IMAC). After cleavage of (His)(6)-MBP tags by TEV protease, (His)(6)-MBP tags were separated from target proteins by a subtractive 2nd IMAC. As a part of quality assurance, all purified proteins were subjected to MALDI-TOF and ESI mass spectrometry to confirm target identity and integrity, and determine incorporation of seleno-methionine (SeMet) and (15)N and (13)C isotopes. The protocols have been used successfully to provide high quality proteins that are suitable for structural studies by X-ray crystallography and NMR.     

The pURI family of expression vectors: a versatile set of ligation independent cloning plasmids for producing recombinant His-fusion proteins

A family of restriction enzyme- and ligation-independent cloning vectors has been developed for producing recombinant His-tagged fusion proteins in Escherichia coli. These are based on pURI2 and pURI3 expression vectors which have been previously used for the successful production of recombinant proteins at the milligram scale. The newly designed vectors combines two different promoters (lpp(p)-5 and T7 RNA polymerase ?10), two different endoprotease recognition sites for the His?-tag removal (enterokinase and tobacco etch virus), different antibiotic selectable markers (ampicillin and erythromycin resistance), and different placements of the His?-tag (N- and C-terminus). A single gene can be cloned and further expressed in the eight pURI vectors by using six nucleotide primers, avoiding the restriction enzyme and ligation steps. A unique NotI site was introduced to facilitate the selection of the recombinant plasmid. As a case study, the new vectors have been used to clone the gene coding for the phenolic acid decarboxylase from Lactobacillus plantarum. Interestingly, the obtained results revealed markedly different production levels of the target protein, emphasizing the relevance of the cloning strategy on soluble protein production yield. Efficient purification and tag removal steps showed that the affinity tag and the protease cleavage sites functioned properly. The novel family of pURI vectors designed for parallel cloning is a useful and versatile tool for the production and purification of a protein of interest.     

A generic protocol for the expression and purification of recombinant proteins in Escherichia coli using a combinatorial His6-maltose binding protein fusion tag

We describe a generic protocol for the overproduction and purification of recombinant proteins in Escherichia coli. The strategy utilizes a dual His6-maltose binding protein (HisMBP) affinity tag that can be removed from the target protein by digestion of the fusion protein at a designed site by tobacco etch virus protease. The MBP moiety serves to enhance the solubility and promote the proper folding of its fusion partners, and the polyhistidine tag facilitates its purification to homogeneity. This protocol is divided into three stages, each of which takes approximately 1 week to complete: (i) construction of a HisMBP fusion vector; (ii) a pilot experiment to assess the yield and solubility of the target protein; and (iii) the large-scale production and purification of the target protein.     

BPTI and N-terminal extended analogues generated by factor Xa cleavage and cathepsin C trimming of a fusion protein expressed in Escherichia coli

A recombinant gene for BPTI (bovine pancreatic trypsin inhibitor) is expressed in Escherichia coli using a MBP (maltose-binding protein) fusion vector. BPTI is fused through an FXa (blood coagulation factor Xa protease) target sequence (Ile-Glu-Gly-Arg) to the C-terminus of MBP. The MBP moiety of the hybrid protein enables purification in one step utilizing MBP's affinity to cross-linked amylose, and the FXa target sequence allows specific cleavage of the hybrid protein. Effective FXa cleavage is achieved by spacing the FXa target sequence and Arg-1 of the BPTI sequence with four residues (Met-Glu-Ala-Glu). The resulting N-terminal extended BPTI is readily converted to the wild-type sequence by trimming with cathepsin C exopeptidase, for the activity of which the spacing tetrapeptide is optimized. FXa cleavage is prohibited when the target sequence is placed next to Arg-1. In this construction, off-target cleavage at a somewhat homologous sequence (Val-Pro-Gly-Arg) results in five- or six-residue extended BPTI, indicating new details of the FXa specificity. The yield of highly purified recombinant BPTI is 3-6 mg/liter of culture, making the MBP-BPTI expression system convenient for the production of sufficient amounts of protein for NMR studies. 1H NMR is used to analyze the N-extended BPTI analogues.     

Recombinant Passenger Proteins Can Be Conveniently Purified by One-Step Affinity Chromatography

Fusion tag is one of the best available tools to date for enhancement of the solubility or improvement of the expression level of recombinant proteins in Escherichia coli. Typically, two consecutive affinity purification steps are often necessitated for the purification of passenger proteins. As a fusion tag, acyl carrier protein (ACP) could greatly increase the soluble expression level of Glucokinase (GlcK), α-Amylase (Amy) and GFP. When fusion protein ACP-G2-GlcK-Histag and ACP-G2-Amy-Histag, in which a protease TEV recognition site was inserted between the fusion tag and passenger protein, were coexpressed with protease TEV respectively in E. coli, the efficient intracellular processing of fusion proteins was achieved. The resulting passenger protein GlcK-Histag and Amy-Histag accumulated predominantly in a soluble form, and could be conveniently purified by one-step Ni-chelating chromatography. However, the fusion protein ACP-GFP-Histag was processed incompletely by the protease TEV coexpressed in vivo, and a large portion of the resulting target protein GFP-Histag aggregated in insoluble form, indicating that the intracellular processing may affect the solubility of cleaved passenger protein. In this context, the soluble fusion protein ACP-GFP-Histag, contained in the supernatant of E. coli cell lysate, was directly subjected to cleavage in vitro by mixing it with the clarified cell lysate of E. coli overexpressing protease TEV. Consequently, the resulting target protein GFP-Histag could accumulate predominantly in a soluble form, and be purified conveniently by one-step Ni-chelating chromatography. The approaches presented here greatly simplify the purification process of passenger proteins, and eliminate the use of large amounts of pure site-specific proteases.     

Expression and purification of recombinant proteins by fusion to maltose-binding protein

The pMAL vectors provide a method for purifying proteins from cloned genes by fusing them to maltose-binding protein (MBP, product of malE), which binds to amylose. The vectors use the tac promoter and the translation initiation signals of MBP to give high-level expression of the fusion, and an affinity purification for MBP to isolate the fusion protein. The pMAL polylinkers carry restriction sites to insert the gene of interest, and encode a site for a specific protease to separate MBP from the target protein after purification. Vectors with or without the malE signal sequence can be used, to express the protein cytoplasmically for the highest level of production or periplasmically to help in proper folding of disulfide-bonded proteins.     

Construction of a mini-intein fusion system to allow both direct monitoring of soluble protein expression and rapid purification of target proteins

Affinity purification of recombinant proteins has been facilitated by fusion to a modified protein splicing element (intein). The fusion protein expression can be further improved by fusion to a mini-intein, i.e. an intein that lacks an endonuclease domain. We synthesized three mini-inteins using overlapping oligonucleotides to incorporate Escherichia coli optimized codons and allow convenient insertion of an affinity tag between the intein (predicted) N- and C-terminal fragments. After examining the splicing and cleavage activities of the synthesized mini-inteins, we chose the mini-intein most efficient in thiol-induced N-terminal cleavage for constructing a novel intein fusion system. In this system, green fluorescent protein (GFP) was fused to the C-terminus of the affinity-tagged mini-intein whose N-terminus was fused to a target protein. The design of the system allowed easy monitoring of soluble fusion protein expression by following GFP fluorescence, and rapid purification of the target protein through the intein-mediated cleavage reaction. A total of 17 target proteins were tested in this intein-GFP fusion system. Our data demonstrated that the fluorescence of the induced cells could be used to measure soluble expression of the intein fusion proteins and efficient intein cleavage activity. The final yield of the target proteins exhibited a linear relationship with whole cell fluorescence. The intein-GFP system may provide a simple route for monitoring real time soluble protein expression, predicting final product yields, and screening the expression of a large number of recombinant proteins for rapid purification in high throughput applications.     

The novel Fh8 and H fusion partners for soluble protein expression in Escherichia coli: a comparison with the traditional gene fusion technology

The Escherichia coli host system is an advantageous choice for simple and inexpensive recombinant protein production but it still presents bottlenecks at expressing soluble proteins from other organisms. Several efforts have been taken to overcome E. coli limitations, including the use of fusion partners that improve protein expression and solubility. New fusion technologies are emerging to complement the traditional solutions. This work evaluates two novel fusion partners, the Fh8 tag (8 kDa) and the H tag (1 kDa), as solubility enhancing tags in E. coli and their comparison to commonly used fusion partners. A broad range comparison was conducted in a small-scale screening and subsequently scaled-up. Six difficult-to-express target proteins (RVS167, SPO14, YPK1, YPK2, Frutalin and CP12) were fused to eight fusion tags (His, Trx, GST, MBP, NusA, SUMO, H and Fh8). The resulting protein expression and solubility levels were evaluated by sodium dodecyl sulfate polyacrylamide gel electrophoresis before and after protein purification and after tag removal. The Fh8 partner improved protein expression and solubility as the well-known Trx, NusA or MBP fusion partners. The H partner did not function as a solubility tag. Cleaved proteins from Fh8 fusions were soluble and obtained in similar or higher amounts than proteins from the cleavage of other partners as Trx, NusA or MBP. The Fh8 fusion tag therefore acts as an effective solubility enhancer, and its low molecular weight potentially gives it an advantage over larger solubility tags by offering a more reliable assessment of the target protein solubility when expressed as a fusion protein.