Mutational analysis of an ssi region carried by plasmid pACYC184

To investigate the functional contribution of some structural components of the signal that directs single-stranded initiation of DNA replication (ssi signal) carried by a 119-nt segment of plasmid pACYC184 (Bahk et al., 1988), we constructed mutants carrying one-base substitutions and insertions using oligodeoxyribonucleotide (oligo) directed mutagenesis. Two one-base substitution mutants were obtained. The mutants, M13 delta lac 184/Sp and M13 delta lac 184/Ev, carried an SplI site and an EcoRV site, respectively, created by base substitution. Three kinds of synthetic oligos, that is, a 10-bp EcoRI linker, an 8-bp ScaI linker and an 8-bp SmaI linker, were inserted into the SplI site of M13 delta lac 184/Sp, and into the EcoRV site of M13 delta lac 184/Ev. The SSI activity of each mutant examined indicated that the one-base substitutions had different effects on the SSI functions of the altered ssi signals. This fact suggests that some structural components within the 119-bp region make distinct contributions to the SSI function. Moreover, when the three kinds of synthetic linkers were inserted into the mutants M13 delta lac 184/Sp and M13 delta lac 184/Ev, each of the insertion mutations affected the rate of conversion of ss DNA to RFI in vivo and the growth of the recombinant phages in a distinct manner. Judging from the above results, the base composition and the length of a certain specific site were crucial for maintenance of the SSI functional activity, and structural components of the ssi signal contributed distinctly to the SSI function.     

A runaway-replication plasmid pSY343 contains two ssi signals

Taking advantage of the plaque morphology method, we detected two single-stranded initiation (ssi) signals in the plasmid pSY343; one was in the 170-nucleotide (nt) EcoRV-ThaI segment (170P), and the other was in the 93-nt DraI-FnuDII segment (93F), which were designated as ssiA and ssiB, respectively. We cloned the two ssi signals in the filamentous phage vectors M13 delta lac184 and flR199. A conserved 7-nt consensus sequence involved in the n' recognition site for priming DNA initiation on single-stranded (ss) DNA templates (A. Van der Ende, R. Teerstra, H. Van der Avoort, and P.J. Weisbeek, 1983, Nucleic Acids Res. 11, 4957-4975) was found, three copies in 170P and one in 93F. These two ssi signals contain possible stem and loop structures. The 170P overlapped partly with the origin (ori) region of pSY343 and the 93F was away from the ori region. Growth of chimera phages such as M13 delta lac184/ssiA and M13 delta lac184/ssiB was 38- and 71-fold greater, respectively, than that of M13 delta lac184, 8 h after phage infection. The conversion efficiency in vivo of ss to replicative form (RF) DNA of these chimera phages carrying ssiA and ssiB was 1.9- and 2.2-fold greater, respectively, than that of M13 delta lac184, 50 min after infection.     

Direct repeats of the F plasmid incC region express F incompatibility

The nucleotide sequence of the incompatibility region incC, located at 45.8--46.4 kb on the F plasmid map, was determined. This region consists of 543 bp and contains sufficient information to code for only two small polypeptides of 34 and 30 amino acids each. Deletion of the ATG start codons for these two polypeptides has no effect on expression of incC incompatibility. A prominent feature of this sequence is the presence of five 22 bp direct repeats. A 58 bp segment of the incC region that contains two of these direct repeats was inserted into plasmid pACYC184, which is compatible with the F plasmid. The pACYC184 plasmid containing the direct-repeat sequences now expresses incompatibility with the F'lac plasmid and replication-proficient derivatives of the mini-F plasmid.     

Replication of plasmids with the p15A origin in Shewanella putrefaciens MR-1

The plasmid pACYC184 was introduced into Shewanella putrefaciens MR-1 by electroporation. In 100% of the transformants examined, the plasmid was maintained as a free replicon outside the chromosome. This was the case whether or not the plasmid contained a 224-bp DNA insert derived from an open-reading frame of MR-1 genomic DNA. Therefore, in contrast to a report in the literature, plasmids containing the p15A origin of replication can replicate freely in S. putrefaciens MR-1, and do not make convenient vectors for gene replacement in this bacterium. However, we found that plasmids with the pMB1 origin of replication (e.g. pBR322) cannot replicate in MR-1 and could therefore have potential as vectors for gene replacement.     

Mobilization of the pACYC184 plasmid by hybrid pAS8-121 delta plasmids in Escherichia coli cells

The plasmid pACYC184 is shown to be mobilized for conjugal transfer in Escherichia coli cells by the deleted (Tn7-TcR) derivatives of the hybrid conjugative plasmid pAS8-121 (RP4-Co1E1). Both the mobilized and mobilizing plasmids are autonomously inherited by the recipient cells when the mobilizing plasmid carries single copy of IS8 (the plasmid pAS8-121 delta 16). Cointegrates pAS8-121 delta 16D:: ::pACYC184 are found in the recipient cells with pACYC184 being inserted between two repeats of IS8 if the derivate plasmid pAS8-121 delta 16D having the duplication of IS8 is used to mobilize pACYC184 for conjugal transfer. The insertion of pACYC184 between IS8 repeats in the plasmid pAS8-121 delta 16D eliminates the plasmid ability to be inserted with high frequency into the chromosome of the phototrophic bacterium R. sphaeroides 2R. The cointegrate pAS8-121 delta 16D:: pACYC184 is stable but can be resolved during the transformation deriving the plasmid pACYC184:: IS8. The latter may be used as a probe for isolation and analysis of IS8 DNA sequences and for constructing the vectors on the basis of pACYC184.     

Initiation and termination of DNA transfer during conjugation of IncI1 plasmid R64: roles of two sets of inverted repeat sequences within oriT in termination of R64 transfer

Intercellular transfer of plasmid DNA during bacterial conjugation initiates and terminates at a specific origin of transfer, oriT. We have investigated the oriT structure of conjugative plasmid R64 with regard to the initiation and termination of DNA transfer. Using recombinant plasmids containing two tandemly repeated R64 oriT sequences with or without mutations, the subregions required for initiation and termination were determined by examining conjugation-mediated deletion between the repeated oriTs. The oriT subregion required for initiation was found to be identical to the 44-bp oriT core sequence consisting of two units, the conserved nick region sequence and the 17-bp repeat A sequence, that are recognized by R64 relaxosome proteins NikB and NikA, respectively. In contrast, the nick region sequence and two sets of inverted repeat sequences within the 92-bp minimal oriT sequence were required for efficient termination. Mutant repeat A sequences lacking NikA-binding ability were found to be sufficient for termination, suggesting that the inverted repeat structures are involved in the termination process. A duplication of the DNA segment between the repeated oriTs was also found after mobilization of the plasmid carrying initiation-deficient but termination-proficient oriT and initiation-proficient but termination-deficient oriT, suggesting that the 3' terminus of the transferred strand is elongated by rolling-circle-DNA synthesis.     

Functional features of an ssi signal of plasmid pGKV21 in Escherichia coli.

A single-strand initiation (ssi) signal was detected on the Lactococcus lactis plasmid pGKV21 containing the replicon of pWV01 by its ability to complement the poor growth of an M13 phage derivative (M13 delta lac182) lacking the complementary-strand origin in Escherichia coli. This ssi signal was situated at the 229-nucleotide (nt) DdeI-DraI fragment and located within the 109 nt upstream of the nick site of the putative plus origin. SSI activity is orientation specific with respect to the direction of replication. We constructed an ssi signal-deleted plasmid and then examined the effects of the ssi signal on the conversion of the single-stranded replication intermediate to double-stranded plasmid DNA in E. coli. The plasmid lacking an ssi signal accumulated much more plasmid single-stranded DNA than the wild-type plasmid did. Moreover, deletion of this region caused a great reduction in plasmid copy number or plasmid maintenance. These results suggest that in E. coli, this ssi signal directs its lagging-strand synthesis as a minus origin of plasmid pGKV21. Primer RNA synthesis in vitro suggests that E. coli RNA polymerase directly recognizes the 229-nt ssi signal and synthesizes primer RNA dependent on the presence of E. coli single-stranded DNA binding (SSB) protein. This region contains two stem-loop structures, stem-loop I and stem-loop II. Deletion of stem-loop I portion results in loss of priming activity by E. coli RNA polymerase, suggesting that stem-loop I portion is essential for priming by E. coli RNA polymerase on the SSB-coated single-stranded DNA template.     

Plasmid Co1IB contains an ssi signal close to the replication origin

Taking advantage of the plaque morphology method, we identified a single-strand initiation (ssi) signal in plasmid pSM32, a mini-Co1Ib plasmid. This ssi signal was situated in the 350-nt HaeIII segment of the 1.8-kb S7 fragment, and located nearly 400 nt downstream of the origin of DNA replication. Introduction of the ssi signal into a mutant of filamentous phage M13 lacking oric resulted in restoration of phage growth and RFI DNA synthesis. Interestingly, DNA homology studies showed that the nucleotide sequence of the ssi signal was extremely homologous with that of the "G4-type" ssi signal in plasmid R100.     

Genetic basis of non-transposition of Tn5 in Pseudomonas aeruginosa following mobilisation of RP4 Mob::Tn5 from Escherichia coli

Abstract A Tn 5 transposon mutagenesis system based on mobilization of the narrow-host-range plasmid pACYC184 from Escherichia coli by a chromosomally integrated promiscuous plasmid RP4 was found to be non-applicable to Pseudomonas aeruginosa recipients. Transposition following mobilization was based on cloning an RP4 DNA fragment (/ RP4 Mob) into pACYC184 and Tn 5 transposition into the fragment (/ RP4 Mob::Tn5). It was shown by DNA sub-cloning of RP4 Mob::Tn 5 on to a wide-host-range plasmid vector that mobilization was unaffected but that reduced survival of the vector or host following mobilization was responsible. However, mutagenesis was achieved by the provision of cloned RP4 Mob DNA in the P. aeruginosa recipients.     

Isolation and characterization of pHW15, a small cryptic plasmid from Rahnella genomospecies 2

A small cryptic plasmid designated pHW15 was isolated from Rahnella genomospecies 2 WMR15 and its complete nucleotide sequence was determined. The plasmid contained 3002 bp with a G+C content of 47.4%. The origin of replication was identified by deletion analysis as a region of about 600 bp. This region had an identity of 70% to the replication origin of the ColE1 plasmid at the nucleotide level. Sequence analysis revealed the typical elements: RNA I, RNA II and their corresponding promoters, a sequence allowing hybridisation of RNA II to the DNA and favouring processing by RNaseH, a single-strand initiation determinant (ssi) that allows initiation of lagging-strand synthesis, and a terH sequence required for termination of lagging-strand synthesis. The plasmid contained three expressed open reading frames, one of which showed homology to a ColE1 plasmid-encoded protein. Furthermore, a multimer resolution site was identified by sequence analysis. Its deletion resulted in formation of plasmid multimers during growth leading to an increased plasmid loss rate.     

Stabilization of the cloning vector pACYC184 by insertion of F plasmid leading region sequences

The leading region of the F plasmid is, by definition, the first part of the plasmid DNA to be transferred to the recipient cell during conjugation. Restriction fragments of the leading region, when cloned into the plasmid vector pACYC184, extended the maintenance of the normally unstable p15A-derived vector replicon in rec+ Escherichia coli K-12 cells. Mutations in the host's general recombination systems were found to influence the maintenance of these hybrid plasmids.     

Identification of the region required for maintaining pHW126 in its monomeric form

The pHW126-like plasmids are a recently discovered small group of cryptic plasmids replicating by the rolling circle mode. The replication origin of pHW126 consists of a conserved stretch, four perfect direct repeats and a so-called accessory region. The latter increases plasmid stability but is not absolutely necessary for replication. Here, we report that deletion of the accessory region causes rapid multimerization of pHW126. While the number of pHW126-units per cell remains constant, the number of physically independent plasmid molecules is reduced by approximately 40%, rendering random distribution to daughter cells less effective. A conserved inverted repeat within the accessory region could be identified as a sequence necessary for maintaining pHW126 in its monomeric form. A mutant version of pHW126 lacking this inverted repeat could be rescued by placing the single-strand initiation site (ssi) of pHW15 on the plus strand, while including the ssi in the opposite direction had no effect. Thus, our data provide evidence that multimer formation is, besides copy number reduction and ssDNA accumulation, an additional means how loss of a mechanism ensuring efficient lagging strand synthesis may cause destabilization of rolling circle plasmids.     

Initiation signals for complementary strand DNA synthesis on single-stranded plasmid DNA.

The bacteriophage 0X174 origin for (+) strand DNA synthesis, when inserted in a plasmid, is in vivo a substrate for the initiator A protein, that is produced by infecting phages. The result of this interaction is the packaging of single-stranded plasmid DNA into preformed phage coats. These plasmid particles can transduce 0X-sensitive cells; however, the transduction efficiency depends strongly on the presence in the packaged DNA strand of an initiation signal for complementary strand DNA synthesis. A plasmid with the complementary (-) strand origin of 0X inserted in the same strand as the viral (+) origin transduces 50-100 times more efficient than the same plasmid without the (-) origin of 0X. The transduction efficiency of such a particle is comparable to the infection efficiency of the phage particle. It is shown that in this system the 0X (-) origin can be replaced by the complementary strand origins of the bacteriophages G4 and M13. We have used this system to isolate sequences, from E. coli plasmids (pACYC177, CloDF13, miniF and OriC) and from the E. coli chromosome that can function as initiation signals for the conversion of single-stranded plasmid DNA to double-stranded DNA. All isolated origins were found to be dependent for their activity on the dnaB, dnaC and dnaG proteins. We conclude that these signals were all primosome-dependent origins and that primosome priming is the major mechanism for initiation of the lagging strand DNA synthesis in E. coli. The assembly of the primosome depends on the sequence-specific interaction of the n' protein with single-stranded DNA. We have used the isolated sequences to deduce a consensus recognition sequence for the n' protein. The role of a possible secondary structure in this sequence is discussed.     

Visualization of alkali-denatured supercoiled plasmid DNA by atomic force microscopy

To study the alkali denaturation of supercoiled DNA, plasmid pBR322 was treated with gradient concentrations of NaOH solution. The results of gel electrophoresis showed that the alkali denaturation of the supercoiled DNA occurred in a narrow range of pH value (12.88-12.90). The alkali-denatured supercoiled DNA ran, as a sharp band, faster than the supercoiled DNA. The supercoiled plasmid DNA of pBR322, pACYC184 and pJGX15A were denatured by NaOH, and then visualized by atomic force microscopy. Compared with the supercoiled DNA, the atomic force microscopy images of the alkali-denatured supercoiled DNA showed rough surface with many kinks, bulges on double strands with inhomogeneous diameters. The apparent contour lengths of the denatured DNA were shortened by 16%, 16% and 50% for pBR322, pACYC184 and pJGX15A, respectively. All evidence suggested that the alkali-denatured supercoiled DNA had a stable conformation with unregistered, topologically constrained double strands and intrastrand secondary structure.     

Cloning and organization of genes for 5S ribosomal RNA in the sea urchin. Lytechinus variegatus

A 1.35-kb EcoRI fragment of Lytechinus variegatus DNA containing a single 5S rRNA gene has been cloned into the plasmid vector pACYC184. Four clones from different transformation experiments contain 5S rDNA inserts of about the same size and have the same restriction enzyme digestion patterns for the enzymes HaeIII, HinfI, HhaI, and AluI. One EcoRI site near the HindIII site of the plasmid vector pACYC184 is missing in all the four clones. By DNA sequencing, the missing EcoRI ws found to be EcoRI site, d(AAATTN)d(TTTAAN) in pLu103, one of the four 5S rDNA clones. The structure of pLu103 was determined by restriction mapping and blot hybridization. Three restriction fragments, 1.0-kb HaeIII/HaeIII, 0.375-kb AluI/AluI and 0.249-kb MboII/MboII, which contain the 5S rRNA coding region, have been subcloned into the EcoRI site of the plasmid pACYC184. The organization of 5S rRNA genes in the sea urchin genome was also investigated. It was found that restriction endonuclease HaeIII has a single recognition site within each 5S rDNA repeat, and yields two fragment lengths, 1.2 and 1.3 kb. The behavior of these 5S rRNA genes when total L. variegatus DNA is partially digested with HaeIII is consistent with an arrangement of 5S rRNA genes in at least two tandemly repeated, non-interspersed families. Both the coding region and spacer region of the 5S rRNA gene in pLu103 hybridize to 1.2 and 1.3-kb rDNA families. This indicates that the cloned EcoRI fragment of 5S rDNA in pLu103 represents one single repeat of 5S rDNA in the genome.     

The complete 30-base-pair origin region of bacteriophage phi X174 in a plasmid is both required and sufficient for in vivo rolling-circle DNA replication and packaging

The origin of replication of the isometric single-stranded DNA bacteriophages is located in a specific sequence of 30 nucleotides, the origin region, which is highly conserved in these phage genomes. Plasmids harboring this origin region are subject to rolling-circle DNA replication and packaging of single-stranded (ss) plasmid DNA into phage coats in phi X174 or G4-phage-infected cells. This system was used to study the nucleotide sequence requirements for rolling-circle DNA replication and DNA packaging employing plasmids which contain the first 24, 25, 26, 27, 28 and the complete 30-base-pair (bp) origin region of phi X174. No difference in plasmid ss DNA packaging was observed for plasmids carrying only the 30-bp origin region and plasmids carrying the 30-bp origin region plus surrounding sequences (i.e. plasmids carrying the HaeIII restriction fragment Z6B of phi X174 replicative-form DNA). This indicates that all signals for DNA replication and phage morphogenesis are contained in the 30-bp origin region and that no contribution is made by sequences which immediately surround the origin region in the phi X174 genome. The efficiency of packaging of plasmid ssDNA for plasmids containing deletions in the right part of the origin region decreases drastically when compared with the plasmid containing the complete 30-bp origin region (for a plasmid carrying the first 28 bp of the origin region to approximately 5% and 0.5% in the phi X174 and G4 systems respectively). Previous studies [Fluit, A.C., Baas, P.D., van Boom, J.H., Veeneman, G.H. and Jansz, H.S. (1984) Nucleic Acids Res. 12, 6443--6454] have shown that the presence of the first 27 bp of the origin region is necessary as well as sufficient for cleavage of the viral strand in the origin region by phi X174 gene A protein. Moreover, Brown et al. [Brown, D.R., Schmidt-Glenewinkel, T., Reinberg, D. and Hurwitz, J. (1983) J. Biol. Chem. 258, 8402--8412] have shown that omission of the last 2 bp of the origin region does not interfere with phi X174 rolling-circle DNA replication in vitro. Our results therefore suggest that for optimal phage development in vivo, signals in the origin region are utilized which have not yet been noticed by the in vitro systems for phi X174 phage DNA replication and morphogenesis.     

Cloning of Herpesvirus saimiri DNA fragments representing the entire L-region of the genome

Purified particles of Herpesvirus saimiri, a potent tumor-eliciting virus of primates, contain genomic DNA molecules (145-170 kb) consisting of a unique L-DNA region (112 kb) which is flanked by variable stretches of repetitive sequences (H-DNA). Restriction fragments representing the entire L-DNA of H. saimiri strain No. 11 were cloned in plasmid and bacteriophage vectors. The internal fragments of L-DNA generated by the enzymes EcoRI and KpnI were inserted into plasmid pACYC184, cosmid pJC81, or bacteriophage lambda derivative Charon 4A. The terminal parts of L-DNA, including the junctions between repetitive DNA and unique sequences, were cloned between the cleavage sites for KpnI and SmaI in the plasmid vector pWD7, which was constructed for this purpose. Molecular cloning allowed us to confirm and modify, in part, the existing cleavage maps of H. saimiri DNA. It provides a basis for future studies on virus replication and oncogenic transformation.     

Synthesis of linear plasmid multimers in Escherichia coli K-12.

Linear plasmid multimers were identified in extracts of recB21 recC22 strains containing derivatives of the ColE1-type plasmids pACYC184 and pBR322. A mutation in sbcB increases the proportion of plasmid DNA as linear multimers. A model to explain this is based on proposed roles of RecBC enzyme and SbcB enzyme (DNA exonuclease I) in preventing two types of rolling-circle DNA synthesis. Support for this hypothesis was obtained by derepressing synthesis of an inhibitor of RecBC enzyme and observing a difference in control of linear multimer synthesis and monomer circle replication. Reinitiation of rolling-circle DNA synthesis was proposed to occur by recA+-dependent and recA+-independent recombination events involving linear multimers. The presence of linear plasmid multimers in recB and recC mutants sheds new light on plasmid recombination frequencies in various mutant strains.     

DnaG-dependent priming signals can substitute for the two essential DNA initiation signals in oriV of the broad host-range plasmid RSF1010.

Broad host-range plasmid RSF1010 contains in the oriV region two DNA initiation signals, ssiA(RSF1010) and ssiB(RSF1010), which are essential for plasmid replication. Each of ssiA and ssiB could be substituted functionally by either of the two G4-type (DnaG-dependent) priming signals, the oric of bacteriophage G4 and an ssi signal from plasmid pSY343 (an R1 plasmid derivative). Functions of the chimeric oriVs of RSF1010 thus constructed were dependent on the RSF1010-specific replication proteins, RepA, RepB' and RepC. When both of ssiA and ssiB were replaced by the G4-type ssi signals, functions of the chimeric oriVs were no longer dependent on RepB' (RSF1010-specific DNA primase). The replication activities of the chimeric oriVs of RSF1010 were not influenced markedly by the type of heterologous priming signals they contained. It is conceivable that DNA replication of RSF1010 does not need the priming mechanism for lagging strand synthesis and proceeds by the strand displacement mechanism.