Prolonged antibacterial action of polymer coated suture materials]

The antimicrobial activity of capromed, a surgical polymer-coated sutural material containing dioxidine, quinoxidine or gentamicin was studied in vitro and in vivo. Capromed was shown to be active against the hospital strains of S. aureus, E. coli, Proteus spp., Klebsiella spp. and P. aeruginosa. The antimicrobial activity of ADH and AG threads was preserved for 3 to 4 days after implantation. The DH-2 and G-2 threads preserved their activity for 6 to 7 days. It was concluded that the duration of thread antimicrobial activity depended on the properties of the polymer coating the thread. Capromed was applied to 280 operation wounds in 275 patients. There was no wound suppuration in the group of patients after pure operations (n = 62). In the group of patients after conditionally pure operations (n = 130) suppuration was observed in 2 patients (1.3 per cent). In patients with contaminated wounds (n = 88) suppuration in 5 of them (5.7 per cent) was recorded. The total number of the purulent complications after using capromed in surgical operations amounted to 2.5 per cent. In the control group purulent complications were stated in 8.2 per cent of the cases.     

不同种类可吸收性外科缝线的体外降解性能评价

目的研究3种不同种类的可吸收性缝线的体外降解性能,分析其体外降解产物。方法将3种可吸收性缝线分别按比例浸入Sorensen缓冲液中进行体外降解实验,设3个降解周期组,每组设3个重复,分别过滤分离试样、碎片和溶液,计算试样的质量损耗率。并对其体外降解产物进行定性定量分析。结果3种试样体外降解的质量损耗率均逐期增大;不同种类缝线的体外降解液成分不同,且其主要成份含量逐期增加。结论：不同种类的可吸收性缝线应采用不同的定性定量分析方法,根据产物推断缝线的生物安全性。     

Economics of spider orb-webs: the benefits of producing adhesive capture thread and of recycling silk

1. The replacement of dry, fuzzy cribellar prey capture thread by viscous, adhesive capture thread was a major event in the evolution of orb-weaving spiders. Over 95% of all orb-weaving species now produce adhesive threads.
2. Adhesive thread achieves its stickiness with a much greater material economy than does cribellar thread.
3. Transformational analyses show that, relative to spider mass, adhesive orb-weavers invest less material per mm of capture thread and produce stickier capture threads than do cribellate orb-weavers.
4. The total cost of producing an orb-web that contains cribellar thread is reduced by 32% when a spider recycles its silk and another 34% when these capture threads are replaced by adhesive threads of equal stickiness.
5. The increased economy with which adhesive capture thread achieves its stickiness may have been an important factor that favoured the origin and success of modern orb-weaving spiders that produce adhesive capture threads.     

Capture thread extensibility of orb-weaving spiders: testing punctuated and associative explanations of character evolution

Spider orb-webs contain sticky prey capture threads and non-sticky support threads. Primitive orb-weavers of the Deinopoidea produce dry cribellar threads made of thousands of silk fibrils that surround supporting axial fibres, whereas the viscous threads of modern Araneoidea orb-weavers produce adhesive threads with an aqueous solution that coalesces as droplets around the axial fibres. We have previously shown that the greater diversity of the Araneoidea is phylogenetically significant and attributed this disparity to a number of advantages, considered key innovations, that adhesive thread has over cribellar thread. An important putative advantage of adhesive thread demonstrated by Kohler and Vollrath in their 1995 study is its greater extensibility, a feature that better adapts it to absorb the kinetic energy of a prey strike. However, this conclusion is based on a two-species comparison that does not take advantage of the modern comparative method that requires hypotheses to be tested in a phylogenetic context. Using a transformational analysis to examine threads produced by nine species, our study finds no support for the punctuated explanation that adhesive thread has a greater extensibility than cribellar thread. Instead, it strongly supports the associative null hypothesis that capture thread extensibility is tuned to spider mass and to architectural features of the web, including its capture area, capture spiral spacing, and capture area per radius.     

Growth rate,labeling index,and radiation survival of cells grown in the matrigel threadin vitro tumor model

Summary Six rodent cell lines (36B10 rat glioma cells, 9L rat gliosarcoma cells, V79 Chinese hamster lung fibroblasts, EMT6/UW and EMT6/Ro mouse mammary sarcoma cells, and RIF-1 mouse fibrosarcoma cells) were tested for growth in cylindrical threads of Matrigel. These cells grew in the threads with doubling times of 17–23 h, reaching maximum cell densities on the order of 10⁸ cells/ml. Histological sections of these threads showed a heterogeneous cell distribution: cells grew to confluence at the thread surface and at somewhat lower cell densities in the thread core. [H-3]thymidine labeling index and radiation sensitivity were measured for 9L and EMT6/UW cells in Matrigel threads. For both cell types, the labeling index in Matrigel was lower than observed in cell monolayers, with higher labeling indexes at the thread periphery than in the thread core. When these threads were grown in stirred medium, lower thread diameters, higher cell yields per thread, and higher labeling indices were obtained. EMT6 cell monolayers coated with Matrigel were less radiosensitive than cells in uncoated monolayers. This protective effect was eliminated by irradiating in the presence of 1 mg/ml misonidazole. EMT6 cells consume nearly three times as much oxygen (mole/cm³-sec) as do 9L cells, which are equally radiosensitive in monolayers with or without a Matrigel coating. The radiation sensitivity of EMT6/UW cells in Matrigel threads was similar to that for monolayers of plateau phase cells, whereas for 9L cells, the response in threads was more similar to exponentially growing cells. We conclude that Matrigel threads provide an alternativein vitro model for studying the radiation response of cells in a three-dimensional geometry.     

Short and long range order of the morphology of silk from Latrodectus hesperus (Black Widow) as characterized by atomic force microscopy.

The surfaces of both stretched and unstretched silk threads from the cobweb weaver, Latrodectus hesperus (Black Widow) have been examined by atomic force microscopy (AFM). AFM images of cobweb scaffolding threads show both unordered and highly ordered regions. Two types of fibers within the threads were observed: thicker (approximately 300 nm in diameter) fibers oriented parallel to the thread axis and thinner (10-100 nm) fibrils oriented across the thread axis. While regions which lacked parallel fibers or fibrils were observed on threads at all strain values, the probability of observing fibers and/or fibrils increased with strain. High-resolution AFM images show that with increasing strain, both mean fiber and fibril diameters decrease and that fibrils align themselves more closely with the thread axis. The observation of fibers and fibrils within the cobweb threads has implications for current models of the secondary and tertiary structure and organization of spider silk.     

Protein gradients in byssal threads of some marine bivalve molluscs

Many marine bivalve molluscs produce byssal threads for attachment to solid substrata. Small (less than 10 mm) consecutive sections of the byssal threads of Mytilus edulis, M. californianus, Geukensia demissa, Atrina vexillum, and A. rigida were analyzed by amino acid analysis to determine if chemical composition remains constant as a function of location in thread segments. Nonlinear longitudinal protein gradients, probably involving collagen and an elastic protein, were found in the Mytilus species. In these, collagen peaks in the distal third of the thread. In Geukensia and the Atrina species, although the two differed greatly in composition, there is a clear nonvariability in composition of the thread within each species as a function of location in the thread. The adhesive plaque at the tip of the thread of all species examined differs substantially in composition from the remainder of the thread. Protein gradients in the threads of some bivalves may reflect specific adaptations evolved to respond to exposed habitats in high-energy environments.     

Comparative study of the antibacterial activity of aminoglycoside antibiotics and their combinations with carbenicillin against Pseudomonas aeruginosa

Antibacterial activity of 7 aminoglycoside antibiotics and combinations of tobramycin or gentamicin with carbenicillin was studied with respect to 33 clinical strains of Ps. aeruginosa. Tobramycin, sisomicin, gentamicin and amicacin showed high levels of antibacterial activity. Tobramycin and sisomicin were 3-4 and 2 times more effective than gentamicin. 100 per cent of the Ps. aeruginosa isolates was sensitive to tobramycin and amicacin. The number of the isolates sensitive to sisomicin and gentamicin amounted to 97 and 94 per cent respectively. The respective numbers for streptomycin and kanamycin were 32 and 11 per cent. No monomycin sensitive isolates were detected. Combination of tobramycin or gentamicin with carbenicillin increased the antibacterial activity of the aminoglycoside antibiotics by 2-16 times and that of carbenicillin by 2-32 times. The synergistic effect of gentamicin or tobramycin with carbenicilin was observed with respect to 50 and 58 per cent of the isolates respectively. No antagonistic effect was detected on the combined use of the antibiotics. The majority of the isolates (96 per cent) were sensitive to combinations of carbenicillin in a concentration of 50 micrograms/ml with tobramycin or gentamicin in concentrations of 0.15 or 0.3 micrograms/ml respectively.     

Adhesive efficiency of spider prey capture threads

Cribellar capture threads are comprised of thousands of fine silk fibrils that are produced by the spigots of a spider's cribellum spinning plate and are supported by larger interior axial fibers. This study examined factors that constrain the stickiness of cribellar threads spun by members of the orb-weaving family Uloboridae in the Deinopoidea clade and compared the material efficiency of these threads with that of viscous capture threads produced by members of their sister clade, the Araneoidea. An independent contrast analysis confirmed the direct relationship between cribellar spigot number and cribellar thread stickiness. A model based on this relationship showed that cribellar thread stickiness is achieved at a rapidly decreasing material efficiency, as measured in terms of stickiness per spigot. Another limitation of cribellar thread was documented when the threads of two uloborid species were measured with contact plates of four widths. Unlike that of viscous threads, the stickiness of cribellar threads did not increase as plate width increased, indicating that only narrow bands along the edges of thread contact contributed to their stickiness. As thread volume increased, the gross material efficiency of cribellar threads decreased much more rapidly than that of viscous threads. However, cribellar threads achieved their stickiness at a much greater gross material efficiency than did viscous threads, making it more challenging to explain the transition from deinopoid to araneoid orb-webs.     

Hydrolysis of concentrated sucrose syrups by invertase immobilized on anion exchanger waste cotton thread.

Yeast invertase was immobilized on polyethyleneimine-coated cotton thread by adsorption followed by crosslinking with glutaraldehyde. The thread-bound invertase was used as an easily retrievable system for the hydrolysis of 80% w/v commercial sucrose syrups. The immobilized enzyme was stable for over 90 days to a temperature of 50 degrees C, only when stored in 80% sucrose solution. Above this temperature, inactivation of enzyme was observed. The cotton threads were used in a batch reactor for hydrolysis of sucrose in about 30 batches carried out over a period of 50 days without loss in activity. The threads could also be used in a packed bed reactor (1.51) for 97% hydrolysis of 80% sucrose syrups at 50 degrees C at a rate of about 360 kg per month for a period of 3 months.     

红豆草根瘤侵入线的超微结构研究

用透射电镜对红豆草根瘤侵入线的超微结构进行了观察研究.结果表明,(1)红豆草根瘤侵入线由胞间隙和胞间层细胞壁内陷形成,它们的体积较小,多为管状,基质丰富,含菌很少,常有分叉和1个以上的基质区,而且不同基质区的电子密度、细菌数量和侵入线壁厚度都不相同.(2)红豆草根瘤的侵入线十分丰富,它们不仅大量存在于根瘤分生细胞和幼龄侵染细胞中,也经常出现在发育成熟的侵染细胞内.(3)红豆草根瘤中有一种近似圆形的特殊结构,表面由一层膜包围,其内电子密度较低且无固定结构,且只位于侵染细胞的细胞质中,常在侵入线附近,从不出现在侵染细胞的液泡内和非侵染细胞里面.     

The hagfish slime gland thread cell. I. A unique cellular system for the study of intermediate filaments and intermediate filament-microtubule interactions

Thread cell differentiation in the slime gland of the Pacific hagfish Eptatretus stouti has been studied using light microscopy and scanning and transmission electron microscopy. Thread cell differentiation is remarkable in that the life history of the cell is largely dedicated to the production of a single, tapered, cylindrical, highly coiled, and precisely packaged cytoplasmic thread that may attain lengths of 60 cm and diameters approaching 1.5 micron. Each tapered thread, in turn, is comprised almost entirely of large numbers of intermediate filaments (IFs) bundled in parallel. During differentiation of the thread, the IFs become progressively more tightly packed. Various numbers of microtubules (MTs) are found among the bundled IFs during differentiation of the thread but disappear during the latter stages of thread differentiation. Observations of regularly spaced dots in longitudinal bisections of developing threads, diagonal striations in tangential sections of developing threads, and circumferentially oriented, filament-like structures observed at the periphery of developing threads cut in cross section have led us to postulate a helically oriented component(s) wrapped around the periphery of the developing thread. The enormous size of the fully differentiated thread cell, its apparent singular dedication to the production of IFs, the ease of isolating and purifying the threads and IF subunits (see accompanying paper), and the unique position of the hagfish in the phylogenetic scheme of vertebrate evolution all contribute to the attractiveness of the hagfish slime gland thread cell as a potential model system for studying IF subunit synthesis, IF formation from IF subunits, aggregation of IFs into IF bundles and the interaction(s) of IFs and MTs.     

Mapping chemical gradients within and along a fibrous structural tissue, mussel byssal threads

The byssal thread of a mussel is an extraorganismic connective tissue that exhibits a striking end-to-end gradient in mechanical properties and thus provides a unique opportunity for studying how gradients are made. Mfp-1 (Mytilus foot protein-1) is a conspicuous component of the protective outer cuticle of byssal threads given its high 3,4-dihydroxyphenylalanine (Dopa) content at 10-15 mol %. Amino acid analysis of mfp-1 extracted from successive foot sections of Mytilus galloprovincialis reveals a post-translationally mediated gradient with highest Dopa levels present in mfp-1 from the accessory gland near the tip of the foot decreasing gradually toward the base. The Dopa content of successive segments of byssal threads decreases from the distal to the proximal end and thus reflects the trend of mfp-1 in the foot. Inductively coupled plasma analysis indicates that certain metal ions including iron follow the trend in Dopa along the thread. Energy-dispersive x-ray spectrometry showed that iron, when present, was concentrated in the cuticle of the threads but sparse in the core. The axial iron gradient appears most closely correlated with the Dopa gradient. The direct incubation of mussels and byssal threads in Fe(3+) supplemented seawater showed that byssal threads are unable to sequester iron from the seawater. Instead, particulate/soluble iron is actively taken up by mussels during filter feeding and incorporated into byssal threads during their secretion. Our results suggest that mussels may exploit the interplay between Dopa and metals to tailor the different parts of threads for specific mechanical properties.     

The material cost and stickiness of capture threads and the evolution of orb-weaving spiders

Prey capture threads are essential to the operation of spider orb-webs because they prevent insects that have been intercepted from escaping before a spider can subdue them. The volume of material invested in a web's capture threads is related to spider weight and is the same for primitive orb-weavers that produce cribellar capture thread and modern orb-weavers that produce adhesive capture thread. However, as adhesive capture thread achieves greater stickiness relative to its volume, adhesive orb-webs have a greater total stickiness and, consequently, a greater prey capture potential than cribellate orb-webs. These differences appear to have favoured the transition from cribellate to adhesive capture threads and the success of adhesive orb-weavers, which include 95% of all orb-weaving species. Differences in the thread economy and the total stickiness of webs constructed by spiders of different weights also suggest that adhesive orb-weavers should grow more rapidly and be capable of attaining a larger size than cribellate orb-weavers.     

Fragmin induces tension reduction of actomyosin threads in the presence of micromolar levels of Ca2+

Fragmin was able to reduce the isometric tension of Physarum actomyosin threads to 15-30% of the control tension at the Ca2+ concentrations greater than 10(-6) M. However, fragmin had no effect on the tension of threads when the Ca2+ concentration was lowered below 10(-7) M. The tension once reduced by fragmin could not be recovered by the removal of Ca2+. The remaining tension was shown to be still active from the experiment with quick release or stretch of the thread. This tension reduction is parallel to the decrease in viscosity of F-actin solution by fragmin. Electron microscopy showed that F-actin filaments became shorter in the thread after the tension was reduced by fragmin. Therefore, the severing of F-actin by fragmin in micromolar concentration of calcium resulted in the relaxation of tension by actomyosin threads.     

Experimental study of a gentamycin ointment

Technology of 0.1 per cent gentamicin ointment production was developed. The ointment base consisted of vaseline and parafin (95:5). Pharmacokinetics and innocuousness of the gentamicin ointment were studied. It was shown that the ointment provided gentamicin diffusion through the skin utegument during a long period of time. Histological studies showed no local irritating effect of the ointment on the skin in its local use.     

Experimental and clinical study of nitazol as an antibacterial drug in the complex treatment of peritonitis

Antibacterial properties of the Soviet drug nitazol which is a derivative of imidazole were studied. It was shown that nitazol in a dose of 4-8 micrograms/ml was highly active against gram-negative nonsporulating anaerobes, gram-positive anaerobic cocci and spore-forming Clostridia spp. Unlike metronidazole, it was efficient against both standard and clinical strains of facultative anaerobes such as E. coli, S. aureus and Klebsiella spp. isolated from patients with peritonitis and being poly-resistant to antibiotics. It was found in vitro that the antibacterial effect of nitazol was higher when it was used in combination with some antibiotics. It was demonstrated on experimental models of peritonitis caused by Staphylococcus spp. and E. coli in mice that nitazol used alone or in combination with gentamicin had a favourable effect on the animal survival and lifespan. The combination of nitazol with gentamicin was applied in the combined treatment of appendicular peritonitis in 80 children and its high therapeutic efficacy was stated. Nitazol is useful as an antibacterial drug in the combined treatment of children with purulent peritonitis.     

Factors governing the stickiness of cribellar prey capture threads in the spider family Uloboridae

The surface of a cribellar prey capture thread is formed of thousands of fine, looped fibrils, each issuing from one of the spigots on an oval spinning plate termed the cribellum. This plesiomorphic capture thread is retained by members of the family Uloboridae, in which its stickiness differs among genera. An examination of five cribellar thread features in nine uloborid species shows that only the number of fibrils that form a thread explains these differences in thread stickiness. Neither the physical features of these fibrils, nor the manner in which they are combined to form threads differs among species. Threads produced by orb-weaving species contain fewer fibrils than those produced by species that build reduced webs. Relative to spider weight, the number of fibrils that form a cribellar thread is greatest in simple-web species of the genus Miagrammopes, less in triangle-web species of the genus Hyptiotes, and least in orb-weaving species representing five genera. A transformational analysis shows that change in the number of cribellum spigots is directly related to change in the stickiness of cribellar thread. This direct relationship between the material invested in a cribellar thread and its stickiness may have been a limiting factor that favored the switch from the dry cribellar threads of uloborids to the adhesive capture threads produced by other orb-weaving families. © 1994 Wiley-Liss, Inc.     

Structure of nitrogen-fixing nodules formed by Rhizobium on roots of Parasponia andersonii Planch.

The structure of nitrogen-fixing nodules produced by Rhizobium infection of the non-legume Parasponia andersonii was examined by light and electron (both SEM and TEM) microscopy. Comparisons were made with the nodules previously described on P. rugosa. Like the nodules on different non-legumes formed by other types of endophytes, the Rhizobium nodules on Parasponia resembled modified roots by having a central vascular bundle surrounded by an endophyte-infected zone. The intimate association between the Rhizobium and the host nodule cell was compared with the Rhizobium association found in legumes. The rhizobia were not released from the infection thread as happens in the legume. The infection thread, which propagates the Rhizobium infection to new cells, was transformed within a nodule cell from a darkly stained (light microscopy) or very electron-dense (TEM) structure to a number of thread types. The walls of the threads varied greatly in thickness and often the thread structures were without rigid walls and were only enclosed by a plasma membrane. If the rhizobia are transformed into bacteroids, as in the legumes, it would have to occur when the threads had reached their mature size, when bacterial division had ceased. Nitrogen fixation was considered to occur in all thread types.     

Attachment strength of an adhesive nuisance mussel,limnoperna fortunei,against water flow

The attachment strength of the freshwater mussel Limnoperna fortunei against water flow was studied. Newton's expression successfully described the hydrodynamic drag force acting on the mussel with a drag coefficient value of 1.03. The drag‐resistant force (defined as hydrodynamic drag force at mussel detachment) was smaller than the detachment force measured using a tensile load test. A fairly good correlation was obtained between the drag‐resistant force and the number of secreted threads. The drag‐resistant force divided by the number of threads increased with shell size, suggesting that byssal thread strength increased with mussel growth. For the mussel specimens obtained from a water transmission pipe, thread width increased with shell size. However, thread width was not dependent on current velocity. There was no correlation between the number of secreted threads and shell length, which indicated that the number of secreted threads did not change with mussel size. Therefore, the water velocity needed to detach mussels increases with shell size of the mussel when the number of secreted threads is constant. The increases in the water velocity to detach mussels with larger shells suggests that the mussel becomes more resistant to water flow as it grows. It is estimated that a flow velocity of around lms^‐1 is critical for attachment/detachment of a juvenile mussel with a shell length of a few millimeters and one hundred byssal threads.