Production and characterization of exopolysaccharides from an enthomopathogenic fungus Cordyceps militaris NG3

Optimization of the submerged culture conditions for the mycelial growth and production of exopolysaccharide (EPS) from a newly isolated Cordyceps species (C. militaris NG3) was studied in flask cultures. The optimal temperature and initial pH for EPS production were 30 degrees C and 8.0, respectively. Sucrose (30 g/L) and corn steep powder (10 g/L) were the most suitable carbon and nitrogen source for both mycelial growth and EPS production. There was a distinguishable morphological changes in mycelium grown between organic and inorganic nitrogen sources. A smooth pellet growth with heavy hyphal thickness was observed in the medium containing organic nitrogen sources, whereas irregular pellets with less hairy region were formed in the medium containing inorganic nitrogen sources. More highly branched cells appearing in the medium of organic nitrogen sources seemed a favorable morphological form for both EPS production and mycelial growth. Under optimal culture conditions, the maximum concentrations of mycelial growth and EPS were 17.6 and 3.4 g/L in a 5-L stirred-tank fermenter. Four groups of EPSs (designated as Fr-I, Fr-II, Fr-III, and Fr-IV) were obtained from the culture filtrates by size exclusion chromatography (SEC), and their molecular characteristics were examined by a multiangle laser-light scattering (MALLS) and refractive index (RI) detector system. The weight-average molar masses of the Fr-I, Fr-II, Fr-III, and Fr-IV of EPS were determined to be 2.262 x 10(6), 3.348 x 10(5), 1.049 x 10(5), and 5.059 x 10(4) g/mol, respectively. All four EPSs showed very low polydispersity indices ranging from 1.00 to 1.18. The SEC/MALLS analysis revealed that the molecular shape of the Fr-I was a rigid sphere suspected to be an aggregate of complex polysaccharides, the Fr-II and Fr-III were nearly globular in shape, and the Fr-IV was an almost rodlike structure.     

Enhanced production of exopolysaccharides by fed-batch culture of Ganoderma resinaceum DG-6556

The objectives of this study were to optimize submerged culture conditions of a new fungal isolate, Ganorderma resinaceum, and to enhance the production of bioactive mycelial biomass and exopolysaccharides (EPS) by fed-batch culture. The maximum mycelial growth and EPS production in batch culture were achieved in a medium containing 10 g/l glucose, 8 g/l soy peptone, and 5 mM MnCl(2) at an initial pH 6.0 and temperature 31 degrees C. After optimization of culture medium and environmental conditions in batch cultures, a fed-batch culture strategy was employed to enhance production of mycelial biomass and EPS. Five different EPS with molecular weights ranging from 53,000 to 5,257,000 g/mole were obtained from either top or bottom fractions of ethanol precipitate of culture filtrate. A fed-batch culture of G. resinaceum led to enhanced production of both mycelial biomass and EPS. The maximum concentrations of mycelial biomass (42.2 g/l) and EPS (4.6 g/l) were obtained when 50 g/l of glucose was fed at day 6 into an initial 10 g/l of glucose medium. It may be worth attempting with other mushroom fermentation processes for enhanced production of mushroom polysaccharides, particularly those with industrial potential.     

Study of mycelial growth and bioactive polysaccharide production in batch and fed-batch culture of Grifola frondosa

The fermentation of Grifola frondosa was investigated in the shake flasks and a 5-L jar fermenter in batch and fed-batch modes. In the shake-flask experiments, the preferable mycelial growth and exopolysaccharide (EPS) production was observed at relatively low pH; maltose and glucose were preferred carbon sources for high mycelial production. The EPS was doubled after 13 d of cultivation when glucose was increased from 2% to 4%. Yeast extract (YE) (0.4%) in combination with corn steep powder (CSP) (0.6%) and YE (0.8%) in combination with CSP (1.2%) were preferred nitrogen sources for high mycelial production and EPS production, respectively. All plant oils tested significantly stimulate cell growth of G. frondosa but they failed to enhance EPS production. The EPS products usually consisted of two fractions of different molecular sizes varied by the plant oils used. The fed-batch fermentation by glucose feeding was performed when the glucose concentration in the medium was lower than 0.5% (5g/L), which greatly enhanced the accumulation of mycelial biomass and EPS; the mycelial biomass and EPS were 3.97g/L and 1.04g/L before glucose feeding, which reached 8.23g/L and 3.88g/L at 13 d of cultivation. In contrast, the mycelial biomass and EPS in the batch fermentation were 6.7g/L and 3.3g/L at 13 d of cultivation.     

Improved simultaneous production of mycelial biomass and polysaccharides by submerged culture of <Emphasis Type="Italic">Hericium erinaceum</Emphasis>: optimization using a central composite rotatable design (CCRD)

The aim of this study was to optimize the culture medium used for the mycelial growth and production of intracellular polysaccharides (IPS) and exopolysaccharides (EPS) in a submerged culture of Hericium erinaceum. Of the various factors examined, including carbon and nitrogen sources, vitamins, mineral elements, and initial pH, those that proved to have a significant effect were then tested using a 2⁴ central composite rotatable design (CCRD). Under the optimal culture conditions, the maximal yield of biomass reached 14.24 ± 0.45 g l⁻¹ and was 1.85-fold higher than in the basal medium. The kinetics of EPS biosynthesis in a bioreactor showed that although the highest yield of EPS (2.75 ± 0.27 g l⁻¹) could be obtained on day 8, the process of biosynthesizing high molecular weight polysaccharides proceeded until the depletion of the carbon source in the medium (after 14 days of cultivation). Our results could be very helpful in the large-scale production of bioactive polysaccharides from H. erinaceum.     

Effects of culture conditions on the mycelial growth and bioactive metabolite production in submerged culture of Cordyceps militaris

The influence of initial pH value, various nitrogen sources, plant oils, and modes of propagation (shake-flask and static culture) on the production of biomass, exopolysaccharide (EPS), adenosine and, in particular, cordycepin, by Cordyceps militaris CCRC 32219 were investigated. Optimal conditions for mycelial growth, EPS and cordycepin production were observed at relatively low pH. Amongst organic sources, yeast extract (YE) was favorable for EPS and cordycepin production, while corn steep powder (CSP) was favorable for adenosine production. A lower C/N ratio was favorable for adenosine and cordycepin production; however, too low a C/N ratio led to diminished production. All plant oils tested stimulate mycelial growth and EPS production of C. militaris, but they did not show much effect on the adenosine and cordycepin production. A two-stage fermentation process by combining shake-flask fermentation with static culture significantly enhanced cordycepin production. A Box–Behnken experimental design was employed to optimize the production of cordycepin, which showed that the optimum conditions to produce cordycepin by C. militaris CCRC 32219 were at pH 6, YE concentration of 45 g/l and 8.0 day of the shake culture followed by 16 days of the static culture. Under the optimized conditions, the maximum production (2214.5 mg/l) of cordycepin was obtained, which is much higher than those reported up to date.     

Effect of culture conditions on antifouling compound production of a sponge-associated fungus

Microorganisms associated with invertebrate hosts have long been suggested to be a source for bioactive metabolites. In this study, we reported that a sponge-associated fungus, Letendraea helminthicola, produced two antifouling compounds: 3-methyl-N-(2-phenylethyl) butanamide and cyclo(D-Pro-D-Phe). To optimize the production of these antifouling compounds, we then examined the production of compounds under different culture conditions (temperature, salinity, pH, and carbon and nitrogen sources). This fungus grew well and produced more compounds at temperatures between 18 and 30°C; the fungus grew well at 75 parts per thousand (ppt) salinity but produced the highest amount of antifouling compounds at 30 and 45 ppt. The optimal initial pH value for mycelial growth was 5.5 to 6.5, whereas the production of the antifouling compounds was maximized at pH 3.5 and 4.5. Glucose and xylose (as carbon sources) increased the production of antifouling compounds. Yeast extract and peptone (as nitrogen sources) maximized the production of mycelial biomass and antifouling compounds. Our results indicate that culture conditions greatly affect the production of bioactive compounds from mycelial fungal cultures as exemplified by strain L. helminthicola and that the conditions favorable for fungal growth may not be the best conditions for bioactive compound production.     

A comparative study on the production of exopolysaccharides between two entomopathogenic fungi Cordyceps militaris and Cordyceps sinensis in submerged mycelial cultures

AIMS: The present study comparatively investigates the optimal culture conditions for the production of exopolysaccharides (EPS) and cordycepin during submerged mycelial culture of two entomopathogenic fungi Cordyceps militaris and Cordyceps sinensis. METHODS AND RESULTS: Fermentations were performed in flasks and in 5-l stirred-tank fermenters. In the case of C. militaris, the highest mycelial biomass (22.9 g l(-1)) and EPS production (5 g l(-1)) were achieved in a medium of 40 g l(-1) sucrose, 5 g l(-1) corn steep powder at 30 degrees C, and an initial pH 8.0. The optimum culture conditions for C. sinensis was shown to be (in g l(-1)) 20 sucrose, 25 corn steep powder, 0.78 CaCl2, 1.73 MgSO4.7H2O at 20 degrees C, and an initial pH 4.0, where the maximum mycelial biomass and EPS were 20.9 and 4.1 g l(-1) respectively. Cordycepin, another bioactive metabolite, was excreted at low levels during the early fermentation period (maximum 38.8 mg l(-1) in C. militaris; 18.2 mg l(-1) in C. sinensis). CONCLUSIONS: The two fungi showed different nutritional and environmental requirements in their submerged cultures. Overall, the concentrations of mycelial biomass, EPS and cordycepin achieved in submerged culture of C. militaris were higher than those of C. sinensis. SIGNIFICANCE AND IMPACT OF THE STUDY: C. militaris and C. sinensis are representative insect-born fungi which have been longstanding and widely used as traditional medicines in eastern Asia. Comparative studies between two fungi are currently not available and this is the first report on the optimum medium composition for submerged culture of C. sinensis.     

Optimization of submerged culture process for the production of mycelial biomass and exo-polysaccharides by Cordyceps militaris C738

AIMS: The objective of the present study was to determine the optimal culture conditions for mycelial biomass and exo-polysaccharide (EPS) by Cordyceps militaris C738 in submerged culture. METHODS AND RESULTS: The optimal temperatures for mycelial biomass and EPS production were 20 degrees C and 25 degrees C, respectively, and corresponding optimal initial pHs were found to be 9 and 6, respectively. The suggested medium composition for EPS production was as follows: 6% (w/v) sucrose, 1% (w/v) polypeptone, and 0.05% (w/v) K2HPO4. The influence of pH on the fermentation broth rheology, morphology and EPS production of C. militaris C738 was carried out in a 5-l stirred-tank fermenter. The morphological properties were comparatively characterized by pellet roughness and compactness by use of image analyser between the culture conditions with and without pH control. The roughness and compactness of the pellets indicated higher values at pH-stat culture (pH 6.0), suggesting that larger and more compact pellets were desirable for polysaccharide production (0.91 g g(-1) cell d(-1). CONCLUSIONS: Under the optimized culture conditions (with pH control at 6), the maximum concentration of biomass and EPS were 12.7 g l(-1) and 7.3 g l(-1), respectively, in a 5-l stirred-tank fermenter. SIGNIFICANCE AND IMPACT OF THE STUDY: The critical effect of pH on fungal morphology and rheology presented in this study can be widely applied to other mushroom fermentation processes.     

Optimization of submerged culture condition for the production of mycelial biomass and exopolysaccharides by Agrocybe cylindracea

The optimization of submerged culture conditions and nutritional requirements was studied for the production of exopolysaccharide (EPS) from Agrocybe cylindracea ASI-9002 using the statistically based experimental design in a shake flask culture. Both maximum mycelial biomass and EPS were observed at 25 degrees C. The optimal initial pH for the production of mycelial biomass and EPS were found to be pH 4.0 and pH 6.0, respectively. Subsequently, optimum concentration of each medium component was determined using the orthogonal matrix method. The optimal combination of the media constituents for mycelial growth was as follows: maltose 80 g/l, Martone A-1 6 g/l, MgSO4 x 7H2O 1.4 g/l, and CaCl2 1.1 g/l; for EPS production: maltose 60 g/l, Martone A-1 6 g/l, MgSO4 x 7H2O 0.9 g/l, and CaCl2 1.1 g/l. Under the optimal culture condition, the maximum EPS concentration achieved in a 5-l stirred-tank bioreactor indicated 3.0 g/l, which is about three times higher than that at the basal medium.     

Production of exopolysaccharides by submerged mycelial culture of a mushroom Tremella fuciformis

The optimization of submerged culture conditions for mycelial growth and exopolysaccharide (EPS) production in an edible mushroom Tremella fuciformis was studied in shake flasks and bioreactors. The temperature of 28 degrees C and pH 8 in the beginning of fermentation in agitated flasks was the most efficient condition to obtain maximum mycelial biomass and EPS. The optimal medium constituents were as follows (gL(-1)): glucose 20, tryptone 2, KH(2)PO(4) 0.46, K(2)HPO(4) 1 and MgSO(4).7H(2)O 0.5. The fungus was cultivated under various agitation and aeration conditions in a 5L stirred-tank bioreactor. The maximum cell mass and EPS production were obtained at a relatively high agitation speed of 200 rpm and at an aeration rate of 2 vvm. The flow behavior of the fermentation broth was Newtonian and the maximum apparent viscosity (35 cP) was observed at a highly aerated condition (2 vvm). The EPS productivity in an airlift reactor was higher than that in the stirred-tank reactor. The morphological study revealed that the fungus grows in mainly three different yeast-like forms: ovoid, elongated, and double yeast forms. The high population of the elongated yeast has a very close relationship to high EPS production. The EPS were protein-bound polysaccharides consisted of mainly mannose, xylose, and fucose. The molecular weights of EPS were determined to be (1.3-1.5)x10(6).     

Optimization of culture conditions and medium components for the production of mycelial biomass and exo-polysaccharides with Cordyceps militaris in liquid culture

Both crude exo-biopolymers and mycelial biomass, produced by liquid culture of Cordyceps species, are believed to possess several potential health benefits. As a result of its known biological activities, Cordyceps militaris has been extensively characterized in regards to potential medicinal applications. However, optimized liquid culture conditions for enhanced polysaccharide productivity have yet to be developed, which is a necessary step for industrial applications. Therefore, in this study, the liquid culture conditions were optimized for maximal production of mycelial biomass and exo-polysaccharide (EPS) by C. militaris. The effects of medium composition, environmental factors, and C/N ratio were investigated. Among these variables 80 g, glucose; 10 g, yeast extract; 0.5 g, MgSO₄·7H₂O; and 0.5 g, KH₂PO₄ in 1 L distilled water were found to be the most suitable carbon, nitrogen, and mineral sources, respectively. The optimal temperature, initial pH, agitation, and aeration were determined to be 24°C, uncontrolled pH, 200 rpm, and 1.5 vvm, respectively. Under these optimal conditions, mycelial growth in shake flask cultures and 5 L jar bioreactors was 29.43 and 40.60 g/L, respectively, and polysaccharide production in shake flask cultures and 5 L jar bioreactors was 2.53 and 6.74 g/L, respectively.     

Exopolysaccharide production and mycelial growth in an air-lift bioreactor using Fomitopsis pinicola

For effective exopolysaccharide production and mycelial growth by a liquid culture of Fomitopsis pinicola in an air-lift bioreactor, the culture temperature, pH, carbon source, nitrogen source, and mineral source were initially investigated in a flask. The optimal temperature and pH for mycelial growth and exopolysaccharide production were 25degrees C and 6.0, respectively. Among the various carbon sources tested, glucose was found to be the most suitable carbon source. In particular, the maximum mycelial growth and exopolysaccharide production were achieved in 4% glucose. The best nitrogen sources were yeast extract and malt extract. The optimal concentrations of yeast extract and malt extract were 0.5 and 0.1%, respectively. K2HPO4 and MgSO4 x 7H2O were found to be the best mineral sources for mycelial growth and exopolysaccharide production. In order to investigate the effect of aeration on mycelial growth and exopolysaccharide production in an air-lift bioreactor, various aerations were tested for 8 days. The maximum mycelial growth and exopolysaccharide production were 7.9 g/l and 2.6 g/l, respectively, at 1.5 vvm of aeration. In addition, a batch culture in an air-lift bioreactor was carried out for 11 days under the optimal conditions. The maximum mycelial growth was 10.4 g/l, which was approximately 1.7-fold higher than that of basal medium. The exopolysaccharide production was increased with increased culture time. The maximum concentration of exopolysaccharide was 4.4 g/l, which was about 3.3-fold higher than that of basal medium. These results indicate that exopolysaccharide production increased in parallel with the growth of mycelium, and also show that product formation is associated with mycelial growth. The developed model in an air-lift bioreactor showed good agreement with experimental data and simulated results on mycelial growth and exopolysaccharide production in the culture of F pinicola.     

Optimisation of submerged culture conditions for the production of mycelial biomass and exopolysaccharide byPleurotus nebrodensis

The optimisation of submerged culture conditions and nutritional requirements was studied for the production of exopolysaccharide (EPS) fromPleurotus nebrodensis. The optimal temperature and initial pH for both mycelial growth and EPS production in shake flask cultures were 25 °C and 8.0, respectively. Maltose was found the most suitable carbon source for both mycelial biomass and EPS production. Yeast extract was favourable nitrogen source for both mycelial biomass and EPS production. Optimum concentration of each medium component was determined using the orthogonal matrix method. The optimal combination of the media constituents for mycelial growth and EPS production was as follows: 200 g l^?1 bran, 25 g l^?1 maltose, 3 g l^?1 yeast extract, 1 g l^?1 KH₂PO₄, 1 g l^?1 MgSO₄ 7H₂O. Under the optimal conditions, the mycelial biomass (4.13 g l^?1) and EPS content (2.40 g l^?1) ofPleurotus nebrodensis was 2.3 and 3.6 times compared to the control with basal medium respectively.     

Fermentation conditions affecting the bacterial growth and exopolysaccharide production by Streptococcus thermophilus ST 111 in milk-based medium

AIMS: To study the effect of different fermentation conditions and to model the effect of temperature and pH on different biokinetic parameters of bacterial growth and exopolysaccharides (EPS) production of Streptococcus thermophilus ST 111 in milk-based medium. METHODS AND RESULTS: The influence of temperature and pH was studied through fermentation and modelling. Fermentations under non-pH controlled conditions with S. thermophilus ST 111 indicated that the EPS production was low in milk medium, even if additional nitrogen sources were supplemented. Under pH-controlled conditions, addition of whey protein hydrolysate to the milk medium resulted in a fivefold increase of the EPS production. This medium did not contain polysaccharides interfering with EPS isolation. Primary and secondary modelling of different fermentations revealed an optimum temperature and pH of 40 degrees C and constant pH 6.2, respectively, for growth in milk medium supplemented with whey protein hydrolysate. Maximum EPS production was observed in the range of 32-42 degrees C and constant pH 5.5-6.6. Whereas growth and maximum EPS production were clearly influenced by temperature and pH, the specific EPS production was only affected by stress conditions (T = 49 degrees C). CONCLUSIONS: Addition of whey protein hydrolysate to milk medium resulted in an increased growth and EPS production of S. thermophilus ST 111 under pH-controlled conditions. A modelling approach allowed studying the influence of temperature and pH on the kinetics of both growth and EPS production. SIGNIFICANCE AND IMPACT OF THE STUDY: The use of an appropriate milk-based medium and a combined model of temperature and pH can be of practical importance for the production of yoghurt or other fermented milks as well as for process optimization of the large-scale production of starter strains to be used for their EPS production.     

Production of exopolysaccharides by submerged mycelial culture of <Emphasis Type="Italic">Grifola frondosa</Emphasis> TFRI1073 and their antioxidant and antiproliferative activities

The exopolysaccharide (EPS) extract of a newly screened Grifola frondosa TFRI1073 was evaluated antioxidant activity, including superoxide anion scavenging activity and reducing power, and the antiproliferative activities by using lung (A549 cells) and breast (MDA-MD-231 cells) cancer cell line. The exopolysaccharide of G. frondosa plays the important role on antioxidant and antiproliferative activities. Nutritional requirements for mycelial biomass and EPS production by G. frondosa were studied. Flushing the culture medium with carbon sources has a stimulating effect on both mycelial biomass and EPS production. In addition, nitrogen sources appeared to be an important and significant component for mycelial biomass. Vitamins were probably not essential for mycelial biomass and EPS production. Inorganic salts appeared to have a significant effect on both mycelial biomass and EPS productions. The effect of phosphate ion on mycelial biomass was better than on EPS production. The information generated in this study will facilitate physiological research of a newly screened G. frondosa TFRI1073, helping to develop the exopolysaccharide of a new dietary supplement and functional food from G. frondosa.     

Optimization of water absorbing exopolysaccharide production on local cheap substrates by Bacillus strain CMG1403 using one variable at a time approach

Optimum culture conditions, and carbon and nitrogen sources for production of water absorbing exopolysaccharide by Bacillus strain CMG1403 on local cheap substrates were determined using one variable at a time approach. Carbon source was found to be sole substrate for EPS biosynthesis in the presence of yeast extract that supported the growth only and hence, indirectly enhanced the EPS yield. Whereas, urea only coupled with carbon source could enhance the EPS production but no effect on growth. The maximum yield of EPS was obtained when Bacillus strain CMG1403 was grown statically in neutral minimal medium with 25% volumetric aeration at 30°C for 10 days. Under these optimum conditions, a maximum yield of 2.71±0.024, 3.82±0.005, 4.33±0.021, 4.73±0.021, 4.85±0.024, and 5.52±0.016 g/L culture medium was obtained with 20 g (sugar) of sweet whey, glucose, fructose, sucrose, cane molasses and sugar beet the most efficient one respectively as carbon sources. Thus, the present study showed that under optimum culture conditions, the local cheap substrates could be superior and efficient alternatives to synthetic carbon sources providing way for an economical production of water absorbing EPS by indigenous soil bacterium Bacillus strain CMG1403.     

Effect of submerged culture conditions on exopolysaccharides production by Armillaria luteo-virens Sacc QH and kinetic modeling

This work aimed to develop the submerged cultivation conditions for improved exopolysaccharides (EPS) production by Armillaria luteo-virens Sacc. The effects of culture temperature, aeration rate, inoculum level, initial pH, and additives on EPS formation and mycelial growth are investigated. The aeration rate, initial pH, and inoculum level significantly affected EPS production under the submerged cultivation. The developed conditions were as follows: cultivation temperature 23 °C, initial pH 5.0, aeration rate 0.5 vvm, 0.5% Tween 80, inoculum level 5% (v/v), and shaking speed 120 r/min. Under the developed conditions, the highest EPS production was 13.01 g/L at 5 days culture time. EPS production was examined in a 5 L bioreactor, and an unstructured kinetic model for EPS formation was well developed. The verified investigations in the large-scale cultivation system showed that the developed models are able to predict the submerged cultivation process of EPS formation. Current results revealed that the submerged cultivation conditions can be utilized to control EPS production, and the unstructured models developed are suitable for explaining EPS production by A. luteo-virens Sacc QH in a large-scale cultivation bioreactor.     

Culture conditions determine the balance between two different exopolysaccharides produced by Lactobacillus pentosus LPS26

Lactobacillus pentosus LPS26, isolated from a natural fermentation of green olives, produces a capsular polymer constituted of two exopolysaccharides (EPS): EPS A, a high-molecular-weight (high-Mw) polysaccharide (1.9x10(6) Da) composed of glucose and rhamnose (3:1), and EPS B, a low-Mw polysaccharide (3.3x10(4) Da) composed of glucose and mannose (3:1). Fermentation experiments in a chemically semidefined medium with different carbon sources (glucose, fructose, mannitol, and lactose) showed that all of them except fructose supported EPS A production rather than EPS B production. The influence of temperature and pH was further analyzed. As the temperature dropped, increased synthesis of both EPS was detected. The control of pH especially enhanced EPS B production. With regard to this, the maximum total EPS production (514 mg liter-1) was achieved at a suboptimal growth temperature (20 degrees C) and pH 6.0. Continuous cultures showed that EPS A, synthesized mainly at low dilution rates, is clearly dependent on the growth rate, whereas EPS B synthesis was hardly affected. EPS production was also detected in supplemented skimmed milk, but no increase on the viscosity of the fermented milk was recorded. This could be linked to the high proportion of the low-Mw polysaccharide produced in these conditions in contrast to that observed in culture media. Overall, the present study shows that culture conditions have a clear impact on the type and concentration of EPS produced by strain LPS26, and consequently, these conditions should be carefully selected for optimization and application studies. Finally, it should be noted that this is, to our knowledge, the first report on EPS production by L. pentosus.     

Effect of aeration and agitation on the production of mycelial biomass and exopolysaccharides in an enthomopathogenic fungus Paecilomyces sinclairii

AIMS: The objective of the present study was to investigate the influence of aeration rate and agitation intensity on the production of mycelial biomass and exopolysaccharide (EPS) in Paecilomyces sinclairii. METHODS AND RESULTS: The P. sinclairii was cultivated under various aeration and agitation conditions in a 5 l stirred-tank bioreactor. The highest mycelial biomass (30.5 g l-1) and EPS production (11.5 g l-1) were obtained at a high aeration rate (3.5 v.v.m.) and at a high agitation speed (250 rev min-1). The apparent viscosities (6000-8000 cP) of fermentation broth increased rapidly towards the end of fermentations at high aeration and agitation conditions. CONCLUSIONS: The high level of dissolved oxygen achieved at a high aeration rate (3.5 v.v.m.) associated with higher hyphal density eventually resulted in enhanced EPS production. Agitation intensity was also proved to be a critical factor influencing on both the mycelial biomass and EPS production: high agitation speeds up to 250 rev min-1 were preferred to the yields of biomass and EPS production. SIGNIFICANCE AND IMPACT OF THE STUDY: The critical effects of aeration and agitation in the culture process of P. sinclairii were found, which is widely applicable to other kinds of basidiomycetes or ascomycetes in their submerged culture processes.     

Extracellular polysaccharide production byRhizobium ciceri from Turkey

The ability of theRhizobium ciceri, to produce extracellular polysaccharides (EPS) was investigated. Tested carbon and nitrogen sources influced EPS synthesis whenR. ciceri Rc5 was grown in a chemically defined medium. Mannitol was the most efficient carbon source among the six sources tested (sucrose, glucose, arabinose, fructose, xylose and rhamnose) and sodium nitrate was the most efficient nitrogen source among the two tested (ammonium sulphate and glycine). High amounts of EPS (1182.0 and 1015 μg ml−1, respectively) were produced by the Rc5 strain in mannitol and sodium nitrate respectively, which was accompanied by a great increase in the production compared to the control.