Preparation of electrode-immobilized, redox-modified oligonucleotides for electrochemical DNA and aptamer-based sensing

Recent years have seen the development of a number of reagentless, electrochemical sensors based on the target-induced folding or unfolding of electrode-bound oligonucleotides, with examples reported to date, including sensors for the detection of specific nucleic acids, proteins, small molecules and inorganic ions. These devices, which are often termed electrochemical DNA (E-DNA) and E-AB (electrochemical, aptamer-based) sensors, are comprised of an oligonucleotide probe modified with a redox reporter (in this protocol methylene blue) at one terminus and attached to a gold electrode via a thiol-gold bond at the other. Binding of an analyte to the oligonucleotide probe changes its structure and dynamics, which, in turn, influences the efficiency of electron transfer to the interrogating electrode. This class of sensors perform well even when challenged directly with blood serum, soil and other complex, multicomponent sample matrices. This protocol describes the fabrication of E-DNA and E-AB sensors. The protocol can be completed in 12 h.     

Single-strand conformation polymorphism analysis using capillary array electrophoresis for large-scale mutation detection

This protocol describes capillary array electrophoresis single-strand conformation polymorphism (CAE-SSCP), a screening method for detection of unknown and previously identified mutations. The method detects 98% of mutations in a sample material and can be applied to any organism where the goal is to determine genetic variation. This protocol describes how to screen for mutations in 192 singleplex or up to 768 multiplex samples over 3 days. The protocol is based on the principle of sequence-specific mobility of single-stranded DNA in a native polymer, and covers all stages in the procedure, from initial DNA purification to final CAE-SSCP data analysis, as follows: DNA is purified, followed by PCR amplification using fluorescent primers. After PCR amplification, double-stranded DNA is heat-denatured to separate the strands and subsequently cooled on ice to avoid reannealing. Finally, samples are analyzed by capillary electrophoresis and appropriate analysis software.     

Substrate activity screening (SAS): a general procedure for the preparation and screening of a fragment-based non-peptidic protease substrate library for inhibitor discovery

Substrate activity screening (SAS) is a fragment-based method for the rapid development of novel substrates and their conversion into non-peptidic inhibitors of Cys and Ser proteases. The method consists of three steps: (i) a library of N-acyl aminocoumarins with diverse, low-molecular-weight N-acyl groups is screened to identify protease substrates using a simple fluorescence-based assay; (ii) the identified N-acyl aminocoumarin substrates are optimized by rapid analog synthesis and evaluation; and (iii) the optimized substrates are converted into inhibitors by direct replacement of the aminocoumarin with known mechanism-based pharmacophores. This protocol describes a general procedure for the solid-phase synthesis of a library of N-acyl aminocoumarin substrates and the screening procedure to identify weak binding substrates.     

A quick, least-invasive, inexpensive and reliable method for sampling Gadus morhua postlarvae for genetic analysis

The present study describes the successful design and testing of a quick, least-invasive, reliable and inexpensive sampling procedure for Atlantic cod Gadus morhua. This protocol can be easily applied to postlarval fish following a simple three-step procedure, without availing of commercial DNA extraction kits, while ensuring survival of sampled individuals.     

Colony filtration blotting for screening soluble expression in Escherichia coli

We have developed a screen for detecting E. coli colonies that produce soluble recombinant target proteins at the colony level: the colony filtration (CoFi) blot. Colonies are transferred, induced and lysed on a filter membrane that can separate soluble proteins from inclusion bodies. Upon lysis, the soluble proteins diffuse through the filter membrane and are captured on a nitrocellulose membrane. The nitrocellulose membrane is incubated with antibodies or probes specific for the target protein and are then developed. In the resulting image, colonies expressing soluble protein can easily be identified. This protocol can be used to screen thousands of constructs in a matter of days, making it very suitable for expression libraries. The protocol is robust and flexible with regard to lysis conditions, induction temperatures and strains. The method requires only standard laboratory equipment and is based on immunochemicals used for western blotting. The following protocol describes the screening of a DNA library with detection done using chemiluminescence. Depending on induction temperature, the whole procedure can be performed in <2 d.     

Solid-phase synthesis of pseudo-complementary peptide nucleic acids

Pseudo-complementary peptide nucleic acid (pcPNA) is a DNA analog in which modified DNA bases 2,6-diaminopurine (D) and 2-thiouracil (U(s)) 'decorate' a poly[N-(2-aminoethyl)glycine] backbone, together with guanine (G) and cytosine (C). One of the most significant characteristics of pcPNA is its ability to effect double-duplex invasion of predetermined DNA sites inducing various changes in the biological and the physicochemical properties of the DNA. This protocol describes solid-phase synthesis of pcPNA. The monomers for G and C are commercially available, but the monomers for D and U(s) need to be synthesized (or can be ordered to custom synthesis companies). Otherwise, the procedure is the same as that employed for Boc-strategy synthesis of conventional PNA. This protocol, if the synthesis of D and U(s) monomers is not factored in, takes approximately 7 d to complete.     

DNA Extraction from small blood volumes and the processing of cellulose blood cards for use in polymerase chain reaction

This article describes two procedures for the purification of genomic DNA from small blood volumes of whole blood using DNAzol^®BD. In the first procedure, DNA is isolated from 1–20 μL of whole blood using a fast and simple protocol that is appropriate for the simultaneous extraction of a large number of samples. The isolated DNA is suitable for gel electrophoresis and polymerase chain reaction (PCR). In the second procedure, cellulose blood cards containing approx 5 μL of dried blood are treated with DNAzol BD in order to retain DNA on the cellulose matrix while removing other cellular components. The blood card with DNA subsequently serves as template in PCR. The blood card processing and amplification procedures are performed in the same PCR tube without any centrifugation steps, making the combined procedures amenable for automated DNA preparation and amplification in a single tube.     

Synthesis, purification and sample experiment for fluorescent pteridine-containing DNA: tools for studying DNA interactive systems

Fluorescent nucleoside analogs provide a means to study DNA interactive systems through direct measurement of fluorescence properties. As integrated parts of DNA, these probes provide opportunities for monitoring subtle changes in DNA structure as it meets and reacts with other molecules. This protocol describes modifications to standard DNA synthesis to efficiently use smaller volumes of the probe phosphoramidite, purification of pteridine-containing sequences and a deprotection procedure specific for 6MI-containing sequences. Yields for probe incorporation in DNA synthesis are comparable to those for standard phosphoramidites. Examples of the fluorescence signals one can expect are described. Automated synthesis, which is dependent on the length of the sequence, takes about 4-5 h for a 20-mer. The deprotection of 6MI-containing sequences takes approximately 6-7 h before the standard ammonium hydroxide overnight incubation. Purification through polyacrylamide gels, electroelution and ethanol precipitation can be accomplished in 6-8 h.     

BAC 'landing' on chromosomes of Brachypodium distachyon for comparative genome alignment

Fluorescence in situ hybridization (FISH) using bacterial artificial chromosomes (BACs) with large genomic DNA inserts as probes (BAC 'landing') is a powerful means by which eukaryotic genomes can be physically mapped and compared. Here we report a BAC landing protocol that has been developed specifically for the weedy grass species Brachypodium distachyon, which has been adopted recently by the scientific community as an alternative model for the temperate cereals and grasses. The protocol describes the preparation of somatic and meiotic chromosome substrates for FISH, the labeling of BACs, a chromosome mapping strategy, empirical conditions for optimal in situ hybridization and stringency washing, the detection of probes and the capturing and processing of images. The expected outcome of the protocol is the specific assignment of BACs containing single-copy inserts to one of the five linkage groups of the genome of this species. Once somatic or meiotic material is available, the entire protocol can be completed in about 3 d. The protocol has been customized empirically for B. distachyon and its near relatives, but it can be adapted with minor modifications to diverse plant species.     

Measuring elastase, proteinase 3 and cathepsin G activities at the surface of human neutrophils with fluorescence resonance energy transfer substrates

The neutrophil serine proteases (NSPs) elastase, proteinase 3 and cathepsin G are multifunctional proteases involved in pathogen destruction and the modulation of inflammatory processes. A fraction of secreted NSPs remains bound to the external plasma membrane, where they remain enzymatically active. This protocol describes the spectrofluorometric measurement of NSP activities on neutrophil surfaces using highly sensitive Abz-peptidyl-EDDnp fluorescence resonance energy transfer (FRET) substrates that fully discriminate between the three human NSPs. We describe FRET substrate synthesis, neutrophil purification and handling, and kinetic experiments on quiescent and activated cells. These are used to measure subnanomolar concentrations of membrane-bound or free NSPs in low-binding microplates and to quantify the activities of individual proteases in biological fluids like expectorations and bronchoalveolar lavages. The whole procedure, including neutrophil purification and kinetic measurements, can be done in 4-5 h and should not be longer because of the lifetime of neutrophils. Using this protocol will help identify the contributions of individual NSPs to the development of inflammatory diseases and may reveal these proteases to be targets for therapeutic inhibitors.     

Efficient RNA 5'-adenylation by T4 DNA ligase to facilitate practical applications

We describe a simple procedure for RNA 5'-adenylation using T4 DNA ligase. The 5'-monophosphorylated terminus of an RNA substrate is annealed to a complementary DNA strand that has a 3'-overhang of 10 nucleotides. Then, T4 DNA ligase and ATP are used to synthesize 5'-adenylated RNA (5'-AppRNA), which should find use in a variety of practical applications. In the absence of an acceptor nucleic acid strand, the two-step T4 DNA ligase mechanism is successfully interrupted after the adenylation step, providing 40%-80% yield of 5'-AppRNA after PAGE purification with few side products (the yield varies with RNA sequence). Optimized reaction conditions are described for 5'-adenylating RNA substrates of essentially any length including long and structured RNAs, without need for sequestration of the RNA 3'-terminus to avoid circularization. The new procedure is applicable on the preparative nanomole scale. This 5'-adenylation strategy using T4 DNA ligase is a substantial improvement over our recently reported adenylation method that uses T4 RNA ligase, which often leads to substantial amounts of side products and requires careful optimization for each RNA substrate. Efficient synthetic access to 5'-adenylated RNA will facilitate a range of applications by providing substrates for in vitro selection; by establishing a new protocol for RNA 5'-capping; and by providing an alternative approach for labeling RNA with (32)P or biophysical probes at the 5'-terminus.     

Validation of quantitative real-time PCR for the in vitro assessment of antileishmanial drug activity

In vitro assays play an important role in the discovery and development of new antileishmanial drugs. The classic macrophage-amastigote models using murine peritoneal macrophages or human-monocyte derived macrophages as host cells are useful for drug screening. A major limitation of these models is the dependence on microscopic counting, a time-consuming and subjective method of analysis. The present study describes a detailed protocol for applying quantitative real-time PCR (qPCR) as an accurate and sensitive tool to assess parasite load in an amastigote-macrophage model. This assay can be performed in a standardized medium-to-high throughput procedure, replacing traditional readout of number of amastigote per macrophages by DNA load measurement.     

Isolation of RNA from bacterial samples of the human gastrointestinal tract

The human gastrointestinal (GI) tract contains a complex microbial community that consists of numerous uncultured microbes. Therefore, nucleic-acid-based approaches have been introduced to study microbial diversity and activity, and these depend on the proper isolation of DNA, rRNA and mRNA. Here, we present an RNA isolation protocol that is suitable for a wide variety of GI tract samples. The procedure for isolating DNA from GI tract samples is described in another Nature Protocols article. One of the benefits of our RNA isolation protocol is that sampling can be performed outside the laboratory, which offers possibilities for implementation in large intervention studies. The RNA isolation is based on mechanical disruption, followed by isolation of nucleic acids using phenol:chloroform:isoamylalcohol extraction and removal of DNA. In our laboratory, this protocol has resulted in the isolation of rRNA and mRNA of sufficient quality and quantity for microbial diversity and activity studies. Depending on the number of samples, the sample type and the quenching procedure chosen, the whole procedure can be performed within 2.5-4 h.     

Practical Proline-catalyzed asymmetric Mannich reaction of aldehydes with N-Boc-imines

This protocol describes a procedure for the synthesis of alpha, beta-branched-b-amino aldehydes via Proline-catalyzed asymmetric Mannich reaction of aldehydes with N-tert-butoxycarbonyl-imines. The crystalline beta-amino aldehydes are formed in good yields and extremely high levels of diastereo- and enantioselectivities without the need for chromatographic purification and are readily oxidized to the corresponding beta-amino acids. The protocol can be completed in approximately 14 h on small scales or up to 30 h on larger scales.     

Synthesis of the 3'-thio-nucleosides and subsequent automated synthesis of oligodeoxynucleotides containing a 3'-S-phosphorothiolate linkage

Oligodeoxynucleotides containing 3'-S-phosphorothiolate (3'-PS) linkages have become useful tools for probing enzyme-catalyzed cleavage processes in DNA. This protocol describes the synthesis of the phosphorothioamidite monomers derived from thymidine and 2'-deoxycytidine, and their application to a fully automated procedure for synthesising oligodeoxynucleotides containing 3'-PS linkages. The synthesis of the 5'-protected-3'-amidites is achievable in 2 weeks with the DNA synthesis and purification taking another 1 week.     

A continuous fluorescence resonance energy transfer angiotensin I-converting enzyme assay

Angiotensin I-converting enzyme (ACE) is involved in various physiological and physiopathological conditions; therefore, the measurement of its catalytic activity may provide essential clinical information. This protocol describes a sensitive and rapid procedure for determination of ACE activity using fluorescence resonance energy transfer (FRET) substrates containing o-aminobenzoic acid (Abz) as the fluorescent group and 2,4-dinitrophenyl (Dnp) as the quencher acceptor. Hydrolysis of a peptide bond between the donor/acceptor pair generates fluorescence that can be detected continuously, allowing quantitative measurement of the enzyme activity. The FRET substrates provide a useful tool for kinetic studies and for ACE determination in biological fluids and crude tissue extracts. An important benefit of this method is the use of substrates selective for the two active sites of the enzyme, namely Abz-SDK(Dnp)P-OH for N-domain, Abz-LFK(Dnp)-OH for C-domain and Abz-FRK(Dnp)P-OH for somatic ACE. This methodology can be adapted for determinations using a 96-well fluorescence plate reader.     

Direct live monitoring of heterotypic axon-axon interactions in vitro

This protocol describes an optimized method for direct in vitro monitoring of homo- and heterotypic axon-axon interactions involved in the developmental assembly of neural circuits. The assay exploits a classical example of heterotypic axonal interactions by modeling the sequential extension of spinal motor and somatosensory neuron axons, but the procedure should be readily adaptable to other neuron types. The protocol is based on the rapid isolation and primary culture of genetically identified motor neurons combined with straightforward vital dye labeling and culture of dorsal root ganglion sensory neurons. Subsequently, axonal interactions are directly monitored via live fluorescence microscopy, whereas axon type identities can be unambiguously delineated throughout the experiments. Through chemical compound application or by using neurons derived from genetically engineered mice, the protocol facilitates the dissection of molecular pathways driving the axonal interactions that are crucial for neural pathway and circuit assembly. The whole procedure can be completed in 3 d.