General method of preparation of uniformly 13C, 15N-labeled DNA fragments for NMR analysis of DNA structures

Summary ¹³C, ¹⁵N labeling of biomolecules allows easier assignments of NMR resonances and provides a larger number of NMR parameters, which greatly improves the quality of DNA structures. However, there is no general DNA-labeling procedure, like those employed for proteins and RNAs. Here, we describe a general and widely applicable approach designed for preparation of isotopically labeled DNA fragments that can be used for NMR studies. The procedure is based on the PCR amplification of oligonucleotides in the presence of labeled deoxynucleotides triphosphates. It allows great flexibility thanks to insertion of a short DNA sequence (linker) between two repeats of DNA sequence to study. Size and sequence of the linker are designed as to create restriction sites at the junctions with DNA of interest. DNA duplex with desired sequence and size is released upon enzymatic digestion of the PCR product. The suitability of the procedure is validated through the preparation of two biological relevant DNA fragments.The first two authors contributed equally to this work.     

Recent developments in methods for RNA sequencing using in vitro 32P-labeling

A variety of approaches that utilize in vitro 32P-labeling of RNA and of oligonucleotides in the sequence analysis of RNAs are described. These include 1) methods for 5'- and 3'- end labeling of RNAs; 2) end labeling and sequencing of oligonucleotides present in complete T1 RNase or pancreatic RNase digests of RNA; 3) use of random endonucleases, such as nuclease P1, for terminal sequence analysis of end labeled RNAs; and 4) use of base specific enzymes or chemical reagents in the sequence analysis of end-labeled RNAs. Also described is an approach to RNA sequencing, applied so far to tRNAs, which is based on partial and random alkaline cleavage of an RNA to generate a series of overlapping oligonucleotide fragments, all containing the original 3'-end of the RNA. Analysis of the 5'- end group of each of these oligonucleotides (following 5'-end labeling with 32P) provides the sequence of most of the tRNA. The above methods have been used to derive the sequences of several tRNAs, the ribosomal 5S and 5 x 8S RNAs, a viroid RNA, and large segments of both prokaryotic and eukaryotic ribosomal and messenger RNAs.     

Site-specific isotope labeling of long RNA for structural and mechanistic studies

A site-specific isotope labeling technique of long RNA molecules was established. This technique is comprised of two simple enzymatic reactions, namely a guanosine transfer reaction of group I self-splicing introns and a ligation with T4 DNA ligase. The trans-acting group I self-splicing intron with its external cofactor, 'isotopically labeled guanosine 5'-monophosphate' (5'-GMP), steadily gave a 5'-residue-labeled RNA fragment. This key reaction, in combination with a ligation of 5'-remainder non-labeled sequence, allowed us to prepare a site-specifically labeled RNA molecule in a high yield, and its production was confirmed with (15)N NMR spectroscopy. Such a site-specifically labeled RNA molecule can be used to detect a molecular interaction and to probe chemical features of catalytically/structurally important residues with NMR spectroscopy and possibly Raman spectroscopy and mass spectrometry.     

A fast, efficient and sequence-independent method for flexible multiple segmental isotope labeling of RNA using ribozyme and RNase H cleavage

Structural information on RNA, emerging more and more as a major regulator in gene expression, dramatically lags behind compared with information on proteins. Although NMR spectroscopy has proven to be an excellent tool to solve RNA structures, it is hampered by the severe spectral resonances overlap found in RNA, limiting its use for large RNA molecules. Segmental isotope labeling of RNA or ligation of a chemically synthesized RNA containing modified nucleotides with an unmodified RNA fragment have proven to have high potential in overcoming current limitations in obtaining structural information on RNA. However, low yields, cumbersome preparations and sequence requirements have limited its broader application in structural biology. Here we present a fast and efficient approach to generate multiple segmentally labeled RNAs with virtually no sequence requirements with very high yields (up to 10-fold higher than previously reported). We expect this approach to open new avenues in structural biology of RNA.     

Expression, purification and analysis of the activity of enzymes from the pentose phosphate pathway

RNAs, more than ever before, are increasingly viewed as biomolecules of the future, in the versatility of their functions and intricate three-dimensional folding. To effectively study them by nuclear magnetic resonance (NMR) spectroscopy, structural biologists need to tackle two critical challenges of spectral overcrowding and fast signal decay for large RNAs. Stable-isotope nucleotide labeling is one attractive solution to the overlap problem. Hence, developing effective methods for nucleotide labeling is highly desirable. In this work, we have developed a facile and streamlined source of recombinant enzymes from the pentose phosphate pathway for making such labeled nucleotides. The Escherichia coli (E. coli) genes encoding ribokinase (RK), adenine phosphoribosyltransferase (APRT), xanthine/guanine phosphoribosyltransferase (XGPRT), and uracil phosphoribosyltransferase (UPRT) were sub-cloned into pET15b vectors. All four constructs together with cytidine triphosphate synthetase (CTPS) and human phosphoribosyl pyrophosphate synthetase isoform 1 (PRPPS) were transformed into the E. coli BL21(AI) strain for protein over-expression. The enzyme preparations were purified to >90% homogeneity by a one-step Ni-NTA affinity chromatography, without the need of a further size-exclusion chromatography step. We obtained yields of 1530, 22, 482, 3120, 2120 and 2280 units of activity per liter of culture for RK, PRPPS, APRT, XGPRT, UPRT and CTPS, respectively; the specific activities were found to be 70, 22, 21, 128, 144 and 113 U/mg, respectively. These specific activities of these enzyme constructs are comparable to or higher than those previously reported. In addition, both the growth conditions and purification protocols have been streamlined so that all the recombinant proteins can be expressed, purified and characterized in at most 2 days. The availability and reliability of these constructs should make production of fully and site-specific labeled nucleotides for making labeled RNA accessible and straightforward, to facilitate high-resolution NMR spectroscopic and other biophysical studies.     

Improved segmental isotope labeling methods for the NMR study of multidomain or large proteins: application to the RRMs of Npl3p and hnRNP L

The study of multidomain or large proteins in solution by NMR spectroscopy has been made possible in recent years by the development of new spectroscopic methods. However, resonance overlap found in large proteins remains a limiting factor, making resonance assignments and structure determination of large proteins very difficult. In this study, we present an expressed protein ligation protocol that can be used for the segmental isotopic labeling of virtually any multidomain or high molecular mass protein, independent of both the folding state and the solubility of the protein fragments, as well as independent of whether the fragments are interacting. The protocol was applied successfully to two different multidomain proteins containing RNA recognition motifs (RRMs), heterogeneous nuclear ribonucleoprotein L and Npl3p. High yields of segmentally labeled proteins could be obtained, allowing characterization of the interdomain interactions with NMR spectroscopy. We found that the RRMs of heterogeneous nuclear ribonucleoprotein L interact, whereas those of Npl3p are independent. Subsequently, the structures of the two RRMs of Npl3p were determined on the basis of samples in which each RRM was expressed individually. The two Npl3p RRMs adopt the expected βαββαβ fold.     

Biomass production of site selective 13C/15N nucleotides using wild type and a transketolase E. coli mutant for labeling RNA for high resolution NMR

Characterization of the structure and dynamics of nucleic acids by NMR benefits significantly from position specifically labeled nucleotides. Here an E. coli strain deficient in the transketolase gene (tktA) and grown on glucose that is labeled at different carbon sites is shown to facilitate cost-effective and large scale production of useful nucleotides. These nucleotides are site specifically labeled in C1′ and C5′ with minimal scrambling within the ribose ring. To demonstrate the utility of this labeling approach, the new site-specific labeled and the uniformly labeled nucleotides were used to synthesize a 36-nt RNA containing the catalytically essential domain 5 (D5) of the brown algae group II intron self-splicing ribozyme. The D5 RNA was used in binding and relaxation studies probed by NMR spectroscopy. Key nucleotides in the D5 RNA that are implicated in binding Mg²⁺ ions are well resolved. As a result, spectra obtained using selectively labeled nucleotides have higher signal-to-noise ratio compared to those obtained using uniformly labeled nucleotides. Thus, compared to the uniformly ¹³C/¹⁵N-labeled nucleotides, these specifically labeled nucleotides eliminate the extensive ¹³C–¹³C coupling within the nitrogenous base and ribose ring, give rise to less crowded and more resolved NMR spectra, and accurate relaxation rates without the need for constant-time or band-selective decoupled NMR experiments. These position selective labeled nucleotides should, therefore, find wide use in NMR analysis of biologically interesting RNA molecules.     

Isotopomer analysis using GC-MS

Knowledge of the complete isotopomer distribution represents the ultimate amount of information on the labeling pattern of a metabolite. One technique for measuring the isotopomer distributions is the analysis of the multiplet intensities arising from the 13C-13C couplings in NMR spectroscopy. While this technique has proven to be very valuable in the elucidation of labeling patterns of C2 and C3 units of various amino acids, fragments larger than C3 are very difficult to measure. Another technique, GC-MS, offers a unique possibility of analyzing fragments larger than C3 and GC-MS is therefore able to give information which is complementary to the information that can be obtained from NMR spectroscopy. In this work we have developed fast, simple, and robust GC-MS methods that can be used to gain information on the labeling patterns of the amino acids in a crude biomass hydrolysate. It is shown that a combination of information obtained from these analyses and information from the NMR spectroscopy is able to yield a much more complete picture of the isotopomer distributions of the amino acids than any of the two techniques alone. The GC-MS method was used for analyzing the labeling patterns of amino acids from a batch cultivation of Penicillium chrysogenum grown on fully labeled glucose. The data from this analysis showed no signs of any significant carbon isotope effects, and the measurements can therefore be used without corrections for metabolic flux analysis.     

Direct detection of small RNAs using splinted ligation

This protocol describes a method for direct labeling and detection of small RNAs present in total RNA by splinted ligation. The assay uses a small RNA-specific bridge oligonucleotide to form base pairs with the small RNA and a 5'-end-radiolabeled ligation oligonucleotide. The captured small RNA is directly labeled by ligation. Detection of the labeled small RNAs is performed by denaturing gel electrophoresis and autoradiography or phosphor-imaging. This protocol has been successfully used to study expression of various classes of biological small RNAs from nanogram to microgram amounts of total RNA without an amplification step. It is significantly simpler to perform and more sensitive than either northern blotting or ribonuclease protection assays. Once the oligonucleotides have been synthesized and total RNA has been extracted, the procedure can be completed in 6 h.     

Transcription map for adenovirus type 12 DNA.

The regions of the adenovirus type 12 genome which encode l- and r-strand-specific cytoplasmic RNA were mapped by the following procedure. Radioactive, intact, separated complementary strands of the viral genome were hybridized to saturating amounts of unlabeled late cytoplasmic RNA. The segments of each DNA strand complementary to the RNA were then purified by S1 nuclease digestion of the hybrids. The arrangement of the coding regions of each strand was deduced from the pattern of hybridization of these probes to unlabeled viral DNA fragments produced by digestion with EcoRI, BamHI, and HindIII.. The resulting map is similar, if not identical, to that of adenovirus type 2. The subset of the late cytoplasmic RNA sequences which are expressed at early times were located on the map by hybridizing labeled, early cytoplasmic RNA to both unlabeled DNA fragments and unlabeled complementary strands of specific fragments. Early cytoplasmic RNA hybridized to the r-strand to EcoRI-C and BamHI-B and to the l-strand of BamHI-E. Hybridization to BamHI-C was also observed. The relative rates of accumulation of cytoplasmic RNA complementary to individual restriction fragments was measured at both early and late times. Early during infection, most of the viral RNA appearing in the cytoplasm was derived from the molecular ends of the genome. Later (24 to 26 h postinfection) the majority of the newly labeled cytoplasmic RNA was transcribed from DNA sequences mapping between 25 and 60 map units on the genome.     

Alterations in the Distribution of Labeled Ribonucleic Acid in Polyribosomes from Escherichia coli Infected with Bacteriophage R17

The distribution of labeled ribonucleic acid (RNA) associated with polysomes from Escherichia coli infected with the bacteriophage R17 was investigated. Pulse-labeling of RNA for 15 sec with (3)H-uridine resulted in increased labeling of the RNA associated with larger polysomes from infected cells as compared to control cells. Analysis of the RNA indicated that the increased labeling of large polysomes resulted from the presence of labeled double-stranded viral RNA. Other species of 15-sec pulse-labeled RNA entered into polysome formation in both infected and control cells. On the other hand, pulse-labeling of cultures for 15 sec with (3)H-uridine followed by a 5-min chase with unlabeled uridine resulted in a greater decrease in the amount of labeled RNA associated with large polysomes from infected cells as compared to control cells. This decreased labeling of large polysomes from infected cells was accompanied by an increased amount of label associated with the monomer to trimer regions. Analysis of RNA labeled under pulse-chase conditions indicated that virus infection resulted in an increased amount of heterogeneous 5 to 15S RNA in both the monomer to trimer and ribosomal subunit-soluble regions of the polysome profile. Labeled 5 to 15S RNA extracted directly from infected cells under pulse-chase conditions, without prior polysome fractionation, was characterized by a shift toward a distribution of smaller polynucleotides.     

A new approach to the isolation of RNA-DNA hybrids and its application to the quantitative determination of labeled tumor virus RNA

A procedure has been developed by which the hybrid formed between a labeled RNA and complementary DNA can be selectively separated from all other single and double-stranded nucleic acids. We describe the application of this procedure to the quantitative determination of labeled avian tumor virus RNA. Purified DNA complementary to avian myeloblastosis virus RNA is extended at its 3′ terminus with 40 to 60 dCMP residues, using terminal deoxynucleotidyl-transferase. The elongated DNA is annealed with the labeled nucleic acid preparation and the mixture is passed through a column of Sephadex to which poly(I) has been covalently bound. The poly(I) retains the specific RNA-DNA hybrids by virtue of their poly(C) extension. The column is washed with RNAase to degrade nonhybridized RNA, the RNA retained on the column is eluted with formamide and its radioactivity is determined. The background hybridization was reduced to 0.003 to 0.008% by addition of oligo(C)_5.20 to the hybridization mixture and by carrying out the adsorption to the poly(I)-Sephadex column in the presence of poly(U). The hybridization efficiency was about 50%. The content of radioactive Rous sarcoma virus-specific RNA was determined in infected and uninfected cells after labeling with [³H]uridine for two hours. The content of labeled virus-specific RNA in infected cells was 0.6 to 0.9% and 0.05% in uninfected cells. The value found for monkey cell RNA was 0.009%. This method can be used for the detection of hybrids between labeled RNA and complementary DNAs too short to allow quantitation by conventional methods. If the RNAase step is omitted the procedure can be used for the isolation of any RNA for which a complementary DNA is available, as well as for its precursor.     

Asymmetry of 13C labeled 3-pyruvate affords improved site specific labeling of RNA for NMR spectroscopy

Selective isotopic labeling provides an unparalleled window within which to study the structure and dynamics of RNAs by high resolution NMR spectroscopy. Unlike commonly used carbon sources, the asymmetry of ¹³C-labeled pyruvate provides selective labeling in both the ribose and base moieties of nucleotides using Escherichia coli variants, that until now were not feasible. Here we show that an E. coli mutant strain that lacks succinate and malate dehydrogenases (DL323) and grown on [3-¹³C]-pyruvate affords ribonucleotides with site specific labeling at C5′ (~95%) and C1′ (~42%) and minimal enrichment elsewhere in the ribose ring. Enrichment is also achieved at purine C2 and C8 (~95%) and pyrimidine C5 (~100%) positions with minimal labeling at pyrimidine C6 and purine C5 positions. These labeling patterns contrast with those obtained with DL323 E. coli grown on [1, 3-¹³C]-glycerol for which the ribose ring is labeled in all but the C4′ carbon position, leading to multiplet splitting of the C1′, C2′ and C3′ carbon atoms. The usefulness of these labeling patterns is demonstrated with a 27-nt RNA fragment derived from the 30S ribosomal subunit. Removal of the strong magnetic coupling within the ribose and base leads to increased sensitivity, substantial simplification of NMR spectra, and more precise and accurate dynamic parameters derived from NMR relaxation measurements. Thus these new labels offer valuable probes for characterizing the structure and dynamics of RNA that were previously limited by the constraint of uniformly labeled nucleotides.     

Isotope labeling strategies for NMR studies of RNA

The known biological functions of RNA have expanded in recent years and now include gene regulation, maintenance of sub-cellular structure, and catalysis, in addition to propagation of genetic information. As for proteins, RNA function is tightly correlated with structure. Unlike proteins, structural information for larger, biologically functional RNAs is relatively limited. NMR signal degeneracy, relaxation problems, and a paucity of long-range ¹H–¹H dipolar contacts have limited the utility of traditional NMR approaches. Selective isotope labeling, including nucleotide-specific and segmental labeling strategies, may provide the best opportunities for obtaining structural information by NMR. Here we review methods that have been developed for preparing and purifying isotopically labeled RNAs, as well as NMR strategies that have been employed for signal assignment and structure determination.