Preparation of chitosan derivative with polyethylene glycol side chains for porous structure without specific processing technique

The graft copolymer, chitosan-g-polyethylene glycol (PEG), was prepared through graft polymerization of PEG chains to chitosan due to the esterification reaction between PEG and 6-O-succinate-N-phthaloyl-chitosan (PHCSSA). The graft copolymer with porous structure was observed from scanning electron micrographs. It is a potential method to combine chitosan with the hydrophilic synthetic polymers. The graft reaction was carried out in homogeneous system and yielded copolymers with high grafting content. FTIR, NMR, XRD, DSC, spectrofluorophotometer and SEM were detected to characterize the copolymer.     

Preparation, characterization, and properties of chitosan-g-poly(vinyl alcohol) copolymer

The graft copolymer chitosan-g-poly(vinyl alcohol), with nontoxicity, biodegradability, and biocompatibility, was prepared by a novel method. The copolymer with porous net structure was observed by scanning electron microscopy (SEM). It is a potential method to combine chitosan with the synthetic polymers. The grafting reactions were conducted with various poly(vinyl alcohol) (PVA)/6-O-succinate-N-phthaloyl-chitosan (PHCSSA) feed ratios to obtain chitosan-g-poly(vinyl alcohol) copolymers with various PVA contents. The chemical structure of the chitosan-g-poly(vinyl alcohol) was characterized by Fourier transform infrared and nuclear magnetic resonance (NMR) spectroscopy. Differential scanning calorimetry (DSC), X-ray diffraction (XRD), and SEM were also detected to characterize the copolymer.     

Synthesis and characterization of the biodegradable polycaprolactone-graft-chitosan amphiphilic copolymers

A novel synthetic approach to biodegradable amphiphilic copolymers based on poly (epsilon-caprolactone) (PCL) and chitosan was presented, and the prepared copolymers were used to prepare nanoparticles successfully. The PCL-graft-chitosan copolymers were synthesized by coupling the hydroxyl end-groups on preformed PCL chains and the amino groups present on 6-O-triphenylmethyl chitosan and by removing the protective 6-O-triphenylmethyl groups in acidic aqueous solution. The PCL content in the copolymers can be controlled in the range of 10-90 wt %. The graft copolymers were thoroughly characterized by 1H NMR, 13C NMR, FT-IR and DSC. The nanoparticles made from the graft copolymers were investigated by 1H NMR, DLS, AFM and SEM measurements. It was found that the copolymers could form spherical or elliptic nanoparticles in water. The amount of available primary amines on the surface of the prepared nanoparticles was evaluated by ninhydrin assay, and it can be controlled by the grafting degree of PCL.     

Chitosan graft copolymer nanoparticles for oral protein drug delivery: preparation and characterization

Several novel functionalized graft copolymer nanoparticles consisting of chitosan (CS) and the monomer methyl methacrylate (MMA), N-dimethylaminoethyl methacrylate hydrochloride (DMAEMC), and N-trimethylaminoethyl methacrylate chloride (TMAEMC), which show a higher solubility than chitosan in a broader pH range, have been prepared by free radical polymerization. The nanoparticles were characterized in terms of particle size, zeta potential, TEM, and FT-IR. These nanoparticles were 150-280 nm in size and carried obvious positive surface charges. Protein-loaded nanoparticles were prepared, and their maximal encapsulation efficiency was up to 100%. In vitro release showed that these nanoparticles provided an initial burst release followed by a slowly sustained release for more than 24 h. These graft copolymer nanoparticles enhanced the absorption and improved the bioavailability of insulin via the gastrointestinal (GI) tract of normal male Sprague-Dawley (SD) strain rats to a greater extent than that of the phosphate buffer solution (PBS) of insulin.     

A new method of controlled grafting modification of chitosan via nitroxide-mediated polymerization using chitosan-TEMPO macroinitiator

The controlled graft modification of chitosan has first been achieved by nitroxide-mediated polymerization using chitosan-TEMPO macroinitiator. Chitosan-TEMPO macroinitiator was obtained from the (60)Co gamma-ray irradiation of N-phthaloylchitosan and 4-hydroxy-TEMPO in DMF under argon atmosphere. The graft copolymers were characterized by (1)H nuclear magnetic resonance ((1)H NMR), Fourier transform infrared spectrometer (FT-IR), X-ray powder diffractometer (XRD) and high performance particle sizer (HPPS). The results indicate that the graft copolymers were successfully synthesized and that the graft polymerization was well controlled by the nitroxide-mediated process. The size distribution of chitosan-g-polystyrene in benzene is very narrow, which may be associated with the "well-defined" polystyrene (PSt) onto chitosan from nitroxide-mediated polymerization. This work provides a new method to prepare chitosan grafting copolymers with controlled molecular weights and "well-defined" structures.     

Preparation and characterization of chitosan-based nanoparticles

The present investigation describes the synthesis and characterization of novel biodegradable nanoparticles based on chitosan for biomedical applications. Natural di- and tricarboxylic acids were used for intramolecular cross-linking of the chitosan linear chains. The condensation reaction of carboxylic groups and pendant amino groups of chitosan was performed by using water-soluble carbodiimide. This method allows the formation of polycations, polyanions, and polyampholyte nanoparticles. The prepared nanosystems were stable in aqueous media at low pH, neutral, and mild alkaline conditions. The structure of products was determined by NMR spectroscopy, and the particle size was identified by laser light scattering (DLS) and transmission electron microscopy (TEM) measurements. It was found that particle size depends on the pH, but at a given pH, it was independent of the ratio of cross-linking and the cross-linking agent. Particle size measured by TEM varied in the range 60-280 nm. In the swollen state, the average size of the particles measured by DLS was in the range 270-370 nm depending on the pH. The biodegradable cross-linked chitosan nanoparticles, as solutions or dispersions in aqueous media, might be useful for various biomedical applications.     

Poly(L-lysine)-graft-chitosan copolymers: synthesis, characterization, and gene transfection effect

Polypeptide/polysaccharide graft copolymers poly(L-lysine)-graft-chitosan (PLL-g-Chi) were prepared by ring-opening polymerization (ROP) of epsilon-benzoxycarbonyl L-lysine N-carboxyanhydrides (Z-L-lysine NCA) in the presence of 6-O-triphenylmethyl chitosan. The PLL-g-Chi copolymers were thoroughly characterized by 1H NMR, 13C NMR, Fourier transform infrared (FT-IR), and gel permeation chromatography (GPC). The number-average degree of polymerization of PLL grafted onto the chitosan backbone could be adjusted by controlling the feed ratio of NCA to 6-O-triphenylmethyl chitosan. The particle size of the complexes formed from the copolymer and calf thymus DNA was measured by dynamic light scattering (DLS). It was found in the range of 120 approximately 340 nm. The gel retardation electrophoresis showed that the PLL-g-Chi copolymers possessed better plasmid DNA-binding ability than chitosan. The gene transfection effect in HEK 293T cells of the copolymers was evaluated, and the results showed that the gene transfection ability of the copolymer was better than that of chitosan and was dependent on the PLL grafting ratio. The PLL-g-Chi copolymers could be used as effective gene delivery vectors.     

Synthesis and characterization of a brush-like copolymer of polylactide grafted onto chitosan

A brush-like poly(DL)-lactide grafted onto chitosan as the backbone was investigated. The graft copolymerization was carried out with triethylaluminum as catalyst in toluene at 70 degrees C. It was found that a greater lactide content in the feeding ratio results in a higher grafting percentage. FTIR spectrometry, (1)H NMR, DSC scanning, and wide-angle X-ray scattering, respectively, are used to characterize these branch copolymers. A copolymer has a definite melting point when the molar feeding ratio of lactide to chitosan is more than 10:1, and the deltaH of the copolymers increases with the feed ratio of lactide to chitosan in feeding.     

Preparation of aspirin and probucol in combination loaded chitosan nanoparticles and in vitro release study

We design and develop chitosan nanoparticles which load two different drugs simultaneously. Aspirin (acetylsalicylic acid, ASA), a hydrophilic drug and probucol (PRO), a hydrophobic drug, are chosen as typical drugs, which are widely used to treat restenosis. The drug loaded chitosan nanoparticles are prepared by gelation of chitosan with tripolyphosphate (TPP) by ionic cross-linking. The physicochemical properties of nanoparticles are investigated by FTIR, transmission electron microscope (TEM), scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). The images show that these particles are spherical in shape with ASA being in the amorphous phase, while PRO is crystalline. The properties of chitosan nanoparticles such as encapsulation capacity and controlled release behaviors of ASA and PRO are evaluated. Experimental results indicate that the loading capacity (LC), encapsulation efficiency (EE) and ASA and PRO release behaviors are affected by several factors including pH, concentration of TPP, chitosan molecular weight (MW) and ASA initial concentration as well as PRO. In vitro release shows that the nanoparticles provide a continuous release. Entrapped ASA is released for more than 24 h and PRO lasts longer for 120 h.     

Preparation of low molecular weight N-maleated chitosan-graft-PAMAM copolymer for enhanced DNA complexation

Low molecular weight N-maleated chitosan-graft-PAMAM (polyamidoamine) copolymer was prepared through N-maleated chitosan (NMC) by Michael type addition reaction to enhance its solubility in water as well as its cationic character for enhancement of DNA complexation. FTIR, (1)H NMR, XRD and GPC were used to characterize the graft copolymers. The copolymer showed better DNA complexation ability at low N/P ratio than that of chitosan due to increased surface charge density by the incorporation of PAMAM molecule on to chitosan backbone. The copolymer can effectively protect the DNA toward anionic surfactant. In vitro release study showed efficient DNA release occurred at physiological pH (pH 7.4). In vitro cell cytotoxicity test indicated toward less cytotoxicity of NMC-graft-PAMAM copolymers compared to that of 25kDa PEI. Thus, the synthesized NMC-graft-PAMAM copolymers have great potential of finding application in drug and gene delivery.     

Synthesis and characterization of hydroxypropyl methylcellulose and ethyl acrylate graft copolymers

The synthesis of hydroxypropyl methylcellulose-g-poly (ethyl acrylate) was carried out by potassium persulfate induced graft copolymerization in homogeneous aqueous medium. By varying the reaction conditions, graft copolymers with different percentage of grafting were prepared. These graft copolymers were characterized by fourier transform infrared spectra (FTIR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), thermogravimetric analyses (TGA), X-ray diffraction analysis (XRD), and dynamic light scattering (DLS) methods. The molecular weight of grafted and ungrafted polymer chains determined by gel permeation chromatography (GPC) increased with increasing monomer and matrix concentration but decreased with increasing initiator concentration and reaction temperature. The mechanical properties of graft copolymers were measured as function of the percentage of grafting. In addition, the equilibrium humidity adsorption behavior and the disintegration time of the grafted copolymer films were also studied.     

Synthesis and study of cross-linked chitosan-N-poly(ethylene glycol) nanoparticles

The present investigation describes the synthesis and characterization of novel biodegradable nanoparticles based on chitosan. Poly(ethylene glycol) dicarboxylic acid was used for intramolecular cross-linking of the chitosan linear chains. The condensation reaction of carboxylic groups and pendant amino groups of chitosan was performed by using water-soluble carbodiimide. The prepared nanosystems were stable in aqueous media. The structure of the products was determined by nuclear magnetic resonance (NMR) spectroscopy, and the particle size was identified by dynamic light scattering (DLS) and transmission electron microscopy (TEM) measurements. It was found that biodegradable cross-linked chitosan nanoparticles experienced considerable swelling because of the length and flexibility of the cross-linking agent. The aqueous solutions or dispersions of nanoparticles were stable and clear or mildly opalescent systems depending on the ratio of cross-linking and molecular weight of chitosan, findings consistent with values of transmittance above 75%. Particle size measured by TEM varied in the range of 4-24 nm. In the swollen state, the average size of the individual particles measured by DLS was in the range of 50-120 nm depending on the molecular weight of chitosan and the ratio of cross-linking.     

Preparation and antibacterial activity of chitosan nanoparticles

Chitosan nanoparticles, such as those prepared in this study, may exhibit potential antibacterial activity as their unique character. The purpose of this study was to evaluate the in vitro antibacterial activity of chitosan nanoparticles and copper-loaded nanoparticles against various microorganisms. Chitosan nanoparticles were prepared based on the ionic gelation of chitosan with tripolyphosphate anions. Copper ions were adsorbed onto the chitosan nanoparticles mainly by ion-exchange resins and surface chelation to form copper-loaded nanoparticles. The physicochemical properties of the nanoparticles were determined by size and zeta potential analysis, atomic force microscopy (AFM), FTIR analysis, and XRD pattern. The antibacterial activity of chitosan nanoparticles and copper-loaded nanoparticles against E. coli, S. choleraesuis, S. typhimurium, and S. aureus was evaluated by calculation of minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC). Results show that chitosan nanoparticles and copper-loaded nanoparticles could inhibit the growth of various bacteria tested. Their MIC values were less than 0.25 microg/mL, and the MBC values of nanoparticles reached 1 microg/mL. AFM revealed that the exposure of S. choleraesuis to the chitosan nanoparticles led to the disruption of cell membranes and the leakage of cytoplasm.     

Adsorption of bovin serum albumin (BSA) onto the magnetic chitosan nanoparticles prepared by a microemulsion system

The adsorption characteristics of BSA onto the magnetic chitosan nanoparticles have been investigated in this paper. The magnetic chitosan nanoparticles were prepared by adding the basic precipitant of NaOH solution into a W/O microemulsion system. The morphology of magnetic chitosan nanoparticles was observed by transmission electron microscope (TEM). It was found that the diameter of magnetic chitosan nanoparticles was from 10nm to 20 nm, and the nanoparticles suspending in the aqueous solution could easily aggregate by a magnet, which suggested that the nanoparticles had good magnetic characteristics. The BSA adsorption experiment indicated that when pH of BSA solution was equal to 4, the maximum adsorption loading reached 110 mg/g. Through measuring the zeta potential of BSA solution and the magnetic nanoparticles, it was found that under this situation the surface of BSA took the negative charge, but the magnetic nanoparticles took the positive charge. Due to the small diameter, the adsorption equilibrium of BSA onto the nanoparticles reached very quickly within 10 min. The adsorption equilibrium of BSA onto the magnetic chitosan nanoparticles fitted well with the Freundlich model. The experimental results showed that the magnetic chitosan nanoparticles have potential to be used for the quick pretreatment in the protein analysis process.     

Carboxymethyl chitosan as a matrix material for platinum, gold, and silver nanoparticles

Carboxymethyl chitosan (CMC) was evaluated for its use in the synthesis and stabilization of catalytic nanoparticles for the first time. Many studies have reported on the ability of chitosan to bind with metal ions and support metal nanoparticles. CMC has a higher reported chelation capacity than chitosan, which has potential implications for improved catalyst formation and immobilization. Platinum, gold, and silver nanoparticles were synthesized in both chitosan and CMC. Particle size, morphology, and aggregation were examined using transmission electron microscopy (TEM). Complexation of nanoparticles was studied through Fourier transform infrared spectroscopy (FTIR). Similar nanoparticle size distributions were observed in the two polymers; however, CMC was observed to have higher rates of aggregation. This indicates that the carboxymethyl groups did not change nanoparticle formation; however, poor cross-linking and a limited anchoring ability of CMC led to the inability to immobilize the catalyst materials effectively.     

Preparation, characterization, and in vitro drug release behavior of biodegradable chitosan-graft-poly(1, 4-dioxan-2-one) copolymer

A novel copolymer of chitosan-g-poly(p-dioxanone) (CGP) was synthesized in bulk by ring-opening polymerization of p-dioxanone (PDO) initiated by the hydroxyl group or amino group of chitosan using SnOct₂ as catalyst. The chemical structure was determined by ¹H NMR. It was found that the feed ratio of chitosan to PDO had a great effect on the degree of polymerization (DP) and the substitution (DS) of PDO. The thermal stability and crystallization behavior of graft copolymer CGP were closely related to the values of DP and DS. When the resulting copolymer was used as Ibuprofen carrier, the release rate of Ibuprofen decreased compared with that of pure chitosan carrier. The drug release behavior was also influenced by the structure of graft copolymers.     

Amphiphilic amylose-g-poly(meth)acrylate copolymers through "click" onto grafting method

Periodate oxidation and subsequent reductive amination with propargylamine was adopted for the controlled functionalization of amylose with alkyne groups, whereas ATRP polymerization was exploited to obtain end-(α)- or end-(ω)-azide functionalized poly(meth)acrylates to be used as "click" reagents in Cu(I) catalyzed azide-alkyne [3 + 2] dipolar cycloaddition. Amylose was effectively grafted with poly(n-butyl acrylate), poly(n-butyl methacrylate), poly(n-hexyl methacrylate), and poly(dimethylaminoethyl methacrylate) with this strategy. Their structure and composition were confirmed by FT-IR, NMR spectroscopies, and thermogravimetric analysis (TGA). Dynamic and static light scattering analyses, as well as TEM microscopy showed that the most amphiphilic among these hybrid graft copolymers self-assembled in water, yielding nanoparticles with ca. 30 nm diameter.     

Preparation,structure, drug release and bioinspired mineralization of chitosan-based nanocomplexes for bone tissue engineering

Chitosan-based nanocomplexes with various forms were prepared by ionically crosslinking with tripolyphosphate (TPP) in different acidic media under mild conditions. It was found that the self-assembly and ionic interactions of chitosan and TPP were greatly affected by reaction media, and chitosan-based nanofibers could be obtained in adipic acid medium while nanoparticles were formed in acetic acid medium. Using bovine serum albumin (BSA) as a macromolecular model-drug, in vitro drug release studies indicated that chitosan-based nanofibers and nanoparticles exhibited a similar prolonged release profile. In addition, the bioinspired mineralization of both chitosan-based nanofibers and nanoparticles was carried out by soaking them in synthetic body fluids (SBF). Transmission electron microscopy (TEM) and X-ray Diffraction (XRD) results indicated that chitosan-based nanofibers have better inductivity for nano-hydroxyapatite formation than chitosan-based nanoparticles. The results suggested that biomimetic chitosan-based nanofibers with controlled release capacity of bioactive factors may be of use in bone tissue engineering for enhancing the bioactivity and bone inductivity.     

Separation of lysozyme using superparamagnetic carboxymethyl chitosan nanoparticles

Functionalized Fe(3)O(4) nanoparticles conjugated with polyethylene glycol (PEG) and carboxymethyl chitosan (CM-CTS) were developed and used as a novel magnetic absorbing carrier for the separation and purification of lysozyme from the aqueous solution and chicken egg white, respectively. The morphology of magnetic CM-CTS nanoparticles was observed by transmission electron microscope (TEM). It was found that the diameter of superparamagnetic carboxymethyl chitosan nanoparticles (Fe(3)O(4) (PEG+CM-CTS)) was about 15 nm, and could easily aggregate by a magnet when suspending in the aqueous solution. The adsorption capacity of lysozyme onto the superparamagnetic Fe(3)O(4) (PEG+CM-CTS) nanoparticles was determined by changing the medium pH, temperature, ionic strength and the concentration of lysozyme. The maximum adsorption loading reached 256.4 mg/g. Due to the small diameter, the adsorption equilibrium of lysozyme onto the nanoparticles reached very quickly within 20 min. The adsorption equilibrium of lysozyme onto the superparamagnetic nanoparticles fitted well with the Langmuir model. The nanoparticles were stable when subjected to six repeated adsorption-elution cycles. Separation and purification were monitored by determining the lysozyme activity using Micrococcus lysodeikticus as substrate. The lysozyme was purified from chicken egg white in a single step had higher purity, as determined by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Considering that the superparamagnetic nanoparticles possess the advantages of high efficiency, cost-effectiveness and excellent binding of a larger amount of lysozyme and easier separation from the reaction system, thus this type of superparamagnetic nanoparticles would bring advantages to the conventional separation techniques of lysozyme from chicken egg white.     

Enhanced intracellular delivery of quantum dot and adenovirus nanoparticles triggered by acidic pH via surface charge reversal

Quantum dot (QD) and adenovirus (ADV) nanoparticles were surface-modified with graft copolymers that exhibited a charge reversal behavior under acidic condition. Poly(L-lysine) (PLL) was grafted with multiple biotin-PEG chains (biotin-PEG-PLL graft copolymer), and the remaining primary amine groups in the PLL backbone were postmodified using citraconic anhydride, a pH-sensitive primary amine blocker, to generate carboxylate groups. The surfaces of streptavidin-conjugated QDs were modified with citraconylated biotin-PEG-PLL copolymer, producing net negatively charged QD nanoparticles. Under acidic conditions, citraconylated amide linkages were cleaved, resulting in the recovery of positively charged amine groups with subsequent alteration of surface charge values. Intracellular delivery of QD nanoparticles was greatly enhanced in an acidic pH condition due to the surface charge reversal. The surface of avidin-conjugated adenovirus (ADV-Avi) encoding an exogenous green fluorescent protein (GFP) gene was also modified in the same fashion. The expression extent of GFP was significantly increased at more acidic pH than pH 7.4. This study demonstrates that various nanosized drug carriers, imaging agents, and viruses could be surface-engineered to enhance their cellular uptake specifically at a low pH microenvironment like solid tumor tissue.