Cultivation of Thalictrum rugosum cell suspension in an improved airlift bioreactor: stimulatory effect of carbon dioxide and ethylene on alkaloid production

Airlift bioreactor operations have been studied for the growth-associated production of secondary metabolites from plant cell suspension cultures. The model system used in this work was Thalictrum rugosum producing berberine, an isoquinoline alkaloid. The airlift system was well suited for growth of Thalictrum cell suspension cultures unless the cell density was high. At high cell density, the airlift system with a draught tube was not adequate due to large aggregates clogging the recirculation paths. This was overcome by use of a cell scraper in the reactor. For berberine production, gas-stripping also played a significant role and it was discovered that CO(2) and ethylene were important for product formation. By supplying a mixture of CO(2) and ethylene into the airlift system, the specific berberine content was increased twofold. It is evident that continuous gas sparging was harmful for the production of berberine without supplementation with other gases.     

Triggered efflux of protoberberine alkaloids from cell suspension cultures ofThalictrum rugosum

Cell cultures ofThalictrum rugosum released their protoberberine alkaloids into the medium, when cells were transferred to fresh medium lacking phosphate. The nutritional factors required and the impact of the cells' physiological state for the alkaloid excretion were analyzed. Cell cultures, having released their alkaloids into the medium, continued to grow when the alkaloid containing medium was replaced by fresh growth medium.     

A novel recycle batch immobilized cell bioreactor for propionate production from whey lactose

Recycle batch fermentations using immobilized cells of Propionibacterium acidipropionici were studied for propionate production from whey permeate, de-lactose whey permeate, and acid whey. Cells were immobilized in a spirally wound fibrous sheet packed in a 0.5-L column reactor, which was connected to a 5-L stirred tank batch fermentor with recirculation. The immobilized cells bioreactor served as a breeder for these recycle batch fermentations. High fermentation rates and conversions were obtained with these whey media without nutrient supplementation. It took approximately 55 h to ferment whey permeate containing approximately 45 g/L lactose to approximately 20 g/L propionic acid. Higher propionate concentrations can be produced with various concentrated whey media containing more lactose. The highest propionic acid concentration obtained with the recycle batch reactor was 65 g/L, which is much higher than the normal maximum concentration of 35 to 45 g/L reported in the literature. The volumetric productivity ranged from 0.22 g/L . h to 0.47 g/L . h, depending on the propionate concentration and whey medium used. The corresponding specific cell productivity was 0.033 to 0.07 g/L . g cell. The productivity increased to 0.68 g/L . h when whey permeate was supplemented with 1% (w/v) yeast extract. Compared with conventional batch fermentation, the recycle batch fermentation with the immobilized cell bioreactor allows faster fermentation, produces a higher concentration of product, and can be run continually without significant downtime. The process also produced similar fermentation results with nonsterile whey media. (c) 1995 John Wiley & Sons, Inc.     

Periodic operation of immobilized live cell bioreactor for the production of candicidin

A lumped model for cell growth and secondary metabolite production in an immobilized live cell bioreactor has been developed. This model is applied here to simulate the performance of an immobilized bioreactor under steady-state conditions and under conditions of periodically varying concentration of a growth-limiting substrate. The results of the simulation study were experimentally verified in the case of the production of the antibiotic candicidin by Streptomyces griseus in an immobilized bioreactor with forced periodic operation. The results of the studies suggest that periodically operated immobilized live cell bioreactors can provide a potent alternative for the production of non-growth-associated biochemicals, as compared to free cell fermentations, pulsed fermentations with process cycle regeneration, and nonregenerated bioreactors. This work has demonstrated that by frequent pulsing of the growth limiting nutrient, stable extended production can be obtained at high specific cellular productivities.     

Two stage cultures for the production of berberine in cell suspension cultures of Thalictrum rugosum.

Two stage culture systems were examined in cell suspensions of Thalictrum rugosum which produce berberine in a growth associated manner. The utilization of indole 3-acetic acid (IAA) as a growth regulator, in place of 2,4-dichlorophenoxyacetic acid (2,4-D), at various growth phases was investigated. Although the enhancing effect was clear when it was used separately, in combination with 2,4-D effect of IAA was suppressed and medium change from 2,4-D to IAA was detrimental to product formation. The decrease of berberine production in this two stage culture may be due to the loss of conditioning factors associated with medium replacement.     

A new method for the production of fine plant cell suspension cultures

Fine, almost single cell, suspensions were produced from both existing suspension cultures containing large cell clumps and from chopped callus pieces by immobilizing the cells in 4–5 mm diameter calcium alginate beads. The immobilized cells continued to divide inside the beads and at the bead surface, and after 2–3 weeks' culture, fine cell suspensions were formed as a result of loss of the surface cells into the medium. After removal of the cell suspensions by filtration, subsequent culture of the beads in fresh medium resulted in the further production of homogeneous cell suspensions after 1–2 weeks. In this way an almost continuous supply of fine cell suspensions could be obtained from cultures containing large clumps of cells. The cells produced by this method remained in this state for at least one culture period, although in some instances repeated subculture resulted in an increase in the size of cell groups. The technique has been successfully applied to the production of fine cell suspensions ofCatharanthus roseus, Nicotiana tabacum andDaucus carota.     

Cephalosporin C production by immobilized Cephalosporium acremonium cells in a repeated batch tower bioreactor

The industrial production of antibiotics with filamentous fungi is usually carried out in conventional aerated and agitated tank fermentors. Highly viscous non-Newtonian broths are produced and a compromise must be found between convenient shear stress and adequate oxygen transfer. In this work, cephalosporin C production by bioparticles of immobilized cells of Cephalosporium acremonium ATCC 48272 was studied in a repeated batch tower bioreactor as an alternative to the conventional process. Also, gas-liquid oxygen transfer volumetric coefficients, k(L)a, were determined at various air flow-rates and alumina contents in the bioparticle. The bioparticles were composed of calcium alginate (2.0% w/w), alumina ( < 44 micra), cells, and water. A model describing the cell growth, cephalosporin C production, oxygen, glucose, and sucrose consumption was proposed. To describe the radial variation of oxygen concentration within the pellet, the reaction-diffusion model forecasting a dead core bioparticle was adopted. The k(L)a measurements with gel beads prepared with 0.0, 1.0, 1.5, and 2.0% alumina showed that a higher k(L)a value is attained with 1.5 and 2.0%. An expression relating this coefficient to particle density, liquid density, and air velocity was obtained and further utilized in the simulation of the proposed model. Batch, followed by repeated batch experiments, were accomplished by draining the spent medium, washing with saline solution, and pouring fresh medium into the bioreactor. Results showed that glucose is consumed very quickly, within 24 h, followed by sucrose consumption and cephalosporin C production. Higher productivities were attained during the second batch, as cell concentration was already high, resulting in rapid glucose consumption and an early derepression of cephalosporin C synthesizing enzymes. The model incorporated this improvement predicting higher cephalosporin C productivity.     

Biotechnological production of xylitol in a three-phase fluidized bed bioreactor with immobilized yeast cells in Ca-alginate beads

Cells of Candida guilliermondii entrapped in Ca-alginate beads were used for xylitol production, from concentrated hemicellulose hydrolyzate of sugarcane bagasse, in a fluidized bed bioreactor (FBR). The maximum xylitol concentration 28.9 g xylitol/L was obtained at a high aeration rate of 600 mL/min after 70 h of fermentation, indicating that the use of high aeration rate in this system is favored for better oxygen transfer into the immobilized cells. The specific xylitol productivity and the xylitol yield were of 0.4 g xylitol/L.h and 0.58 g xylitol/g xylose respectively. The immobilization efficiency at the end of the fermentation was of 65 %. After 90 h of fermentation xylitol productivity and yield decreased to 0.25 g xylitol/L.h and 0.47 g xylitol/g xylose respectively, indicating the beginning of xylitol consumption by the yeast. The use of FBR system with immobilized cells presented high xylitol yield and productivity.     

Examination of immobilized cells in a rotating packed drum reactor for the production of ethanol from d-glucose

A rotating packed drum reactor has been proposed as an immobilized whole cell reactor and its performance for ethanol production has been studied with yeast cells immobilized in calcium alginate gel. In a continuous operation with synthetic d-glucose medium containing 125 g d-glucose l^?1, ethanol productivity was 20 g l^?1 h^?1 at a space velocity of 0.38 l (l gel)^?1 h^?1. With intermittent aeration the viability of yeast cells after 270 h of operation remained above 65%. CO₂ removal was easy, but d-glucose conversion was low at a high space velocity.     

A perfusion air-lift bioreactor for high density plant cell cultivation and secreted protein production

A new bioreactor design that allows continuous perfusion cultivation of plant cell suspensions is described in this paper. This design incorporates an internal cell settling zone with an external-loop air-lift bioreactor. The settling zone is created by inserting a baffle plate into the upper portion of the downcomer. Using this bioreactor, Anchusa officinalis suspension culture was cultivated to a cell density of 27.2 g l⁻¹ DW in 14 days at a perfusion rate of 0.123 per day. The maximum total extracellular protein concentration attained 1.11 g l⁻¹. Complete cell retention was achieved throughout the culture during which the maximum packed cell volume (PCV) exceeded 80%. In comparison, the maximum cell density and extracellular protein concentration in the batch culture were 12.6 g l⁻¹ DW and 0.47 g l⁻¹, respectively. SDS-PAGE of the extracellular protein samples revealed two major bands at 58 and 47 kDa, each accounted for approximately 45% of the total secreted proteins.     

Enhancement of berberine production by spermidine in Thalictrum minus cell suspension cultures

Berberine production in cell suspension cultures of Thalictrum minus L. var. hypoleucum Miq. was significantly enhanced by administration of spermidine, whereas other polyamines such as cadaverine, putrescine and spermine were ineffective. The results of experiments indicated that spermidine causes an increase of ethylene generation which is closely associated with activation of berberine biosynthesis.     

Bioreactor operating strategy inThalictrum rugosum plant cell culture for the production of berberine

Optimal substrate feeding strategy in bioreactor operation was investigated to increase the production of secondary metabolite in a high density culture of plant cell. It was accomplished by the previously proposed structured kinetic model that describes the cell growth and synthesis of the secondary metabolite, berberine, in a batch suspension culture ofThalictrum rugosum. Four types of operation strategies for sugar feeding intoT. rugosum culture were proposed based on the model, which were the periodic fedbatch operations to maintain the cell activity, the cell viability, and the specific production rate, and the perfusion operation to maintain the specific production rate. From the simulation results of these strategies, it could be found that the periodic fed-batch operation and the perfusion operation could achieve the higher volumetric production of berberine (mg berberine/L) and specific production yield (mg berberine/g dry cell weight) than those of batch cultures. Although the highest productivity (mg berberine/day) of berberine could be achieved by the periodic fed-batch operation to maintain the cell activity compared with the other strategies in the periodic fed-batch operations, the specific production yield was low due to the higher maximum dry cell weight than other cases. The periodic fed-batch operation to maintain cell viability resulted in the highest volumetric production of berberine and specific production yield compared with the other strategies. In the cases of maintaining the specific production rate, the per-formance of the periodic fed-batch operation was better than that of the perfusion operation in the respect of the volumetric production and productivity of berberine. In order to increase the volumetric production of berberine and to get the highest specific production yield, the periodic fed-batch operation to maintain cell viability could be chosen as the optimal operating strategy in high density, culture ofT. rugosum plant cell.     

Selective production of bikaverin in a fluidized bioreactor with immobilized Gibberella fujikuroi

The best culture medium composition for the production of bikaverin by Gibberella fujikuroi in shake-flasks, i.e. 100 g glucose l^–1; 1 g NH₄Cl l^–1; 2 g rice flour l^–1; 5 g KH₂PO₄ l^–1 and 2.5 g MgSO₄ l^–1, was obtained through a fractional factorial design and then scaled-up to a fluidized bioreactor. The effects of carbon and nitrogen concentrations, inoculum size, aeration, flow rate and bead sizes on batch bikaverin production using immobilized G. fujikuroi in a fluidized bioreactor were determined by an orthogonal experimental design. Concentrations of up to 6.83 g bikaverin l^–1 were obtained when the medium contained 100 g glucose l^–1 and 1 g NH₄Cl l^–1 with an inoculum ratio of 10% v/v, an aeration rate of 3 volumes of air per volume of medium min^–1, and a bead size of 3 mm. Based on dry weight, the bikaverin production was 30–100 times larger than found in submerged culture and approximately three times larger than reported for solid substrate fermentation.     

Detoxification of organophosphate nerve agents by immobilized dual functional biocatalysts in a cellulose hollow fiber bioreactor

A whole-cell technology for detoxification of organophosphates based on genetically engineered Escherichia coli cell expressing both cellulose-binding domain (CBD) and organophosphorus hydrolase (OPH) onto cell surface was reported recently (Wang et al., 2002). This study reports the application of these biocatalysts when immobilized in a cellulose hollow fiber bioreactor (HFB) for the biodetoxification of a model organophosphate, paraoxon, in a continuous flow mode. In 24 h, 0.79 mg wet cell/cm2 fiber surface were immobilized onto cellulose fibers specifically and strongly through the cellulose binding domain, forming a monolayer demonstrated by Scanning Electronic Micrograph, and essentially no cell was washed away by washing buffer. The immobilized biocatalyst had a high performance of detoxifying paraoxon solution of 5,220 mumol/h x L reactor or 990 mumol/h x m2 reactor. The immobilized biocatalysts maintained a stable degradation capacity for 15 uses over a period of 48 days with only 10% decline in degradation efficiency under operating and storage conditions. In addition, the bioreactor was easily regenerated by washing with 1% sodium dodecyl sulfate (SDS), with 86.7% immobilization capacity and 93.9% degradation efficiency recovery. This is the first report using the HFB in a non-traditional way, immobilizing whole-cell biocatalysts by specific adhesion thus rendering the catalysis operation the advantages of low pressure drop, low shear force, and low energy requirement. The successful application of this genetically engineered dual functional E. coli strain in a model bioreactor shows its promise in large-scale detoxification of organophosphate nerve agents in bulk liquid phase.     

The effect of phenylalanine on biosynthesis of protoberberine alkaloids in the cell culture of low meadow-rue

The addition of 7 mM phenylalanine to the nutrient medium for low meadow-rue (Thalictrum minus L.) cell culturing on the 7th or 8th day doubled berberine secretion into medium. Simultaneously, the content of phenolic compounds increased in the cells and medium. Investigation of phenylalanine ammonia-lyase (PAL) and tyrosine ammonia-lyase (TAL) activities showed that exogenous Phe activated PAL by 35% and inactivated TAL by 20%. When the crude extract was separated on DEAE-Sephacel column, two proteins were isolated. One of them displayed both PAL and TAL activities, whereas another protein displayed only PAL activity. This activity disappeared after cell culturing longer than 20 days and also under the effect of Phe at a concentration reducing alkaloid biosynthesis. Phe addition to medium also increased the content of protein in both the cells and culture medium. The proportion of low-molecular proteins in the medium increased. Testing antimicrobial activity of the medium showed that it was determined by berberine and to a lesser degree by palmatine. Protein fraction also demonstrated antimicrobial activity. An improved antimicrobial activity after Phe adding to medium resulted from alkaloid and protein accumulation. The conclusion was made that one of the mechanisms of Phe action was the control of alkaloid biosynthesis with the involvement of the enzyme system of the early steps of the phenylpropanoid pathway, which, in its turn, is one of the stages in stress-induced plant response to pathogen action.     

Ajmalicine production by cell cultures of Catharanthus roseus: from shake flask to bioreactor

The productivity of a cell culture for the production of a secondary metabolite is defined by three factors: specific growth rate, specific product formation rate, and biomass concentration during production. The effect of scaling-up from shake flask to bioreactor on growth and production and the effect of increasing the biomass concentration were investigated for the production of ajmalicine by Catharanthus roseus cell suspensions. Growth of biomass was not affected by the type of culture vessel. Growth, carbohydrate storage, glucose and oxygen consumption, and the carbon dioxide production could be predicted rather well by a structured model with the internal phosphate and the external glucose concentration as the controlling factors. The production of ajmalicine on production medium in a shake flask was not reproduced in a bioreactor. The production could be restored by creating a gas regime in the bioreactor comparable to that in a shake flask. Increasing the biomass concentration both in a shake flask and in a stirred fermenter decreased the ajmalicine production rate. This effect could be removed partly by controlling the oxygen concentration in the more dense culture at 85% air saturation.     

Effects of rheological properties and mass transfer on plant cell bioreactor performance: production of tropane alkaloids

Volumetric mass transfer coefficients, K(L)a were measured over an aeration rate range from 0.1 to 1.0 vvm in a 1.2-L draft-tube-type airlift bioreactor for different Datura stramonium cell concentrations and correlated with superficial air velocity and rheological properties of the cell suspension. The measured K(L)a values (17-40 h(-1)) for a cell volume fraction of 0.2 (v/v) were approximately 2 times higher than those for the highest cell concentrations tested (cell volume fraction 0.7-0.8 v/v). Cell suspensions exhibited yield stress and pseudoplastic behavior. This behavior was described by the Casson model. The estimated yield stress values depended upon cell concentration with an exponent of 4.0. An empirical correlation based on the data for plant cell suspensions exhibiting yield stress was developed in order to determine aeration strategy for the plant cell cultivation in draft-tube-type airlift bioreactors: \documentclass{article}\pagestyle{empty}\begin{document}$$ {\rm K}_{\rm L} {\rm a} = {\rm A}({\rm U}_{{\rm gr}});{0.3} ({\rm \eta }_{{\rm eff}});{ - 0.4} $$\end{document} Aeration rates above 1.0 vvm caused a significant drop in cell yield and product content. Maximum growth and production were obtained at 0.6 vvm aeration. The cell and product yields obtained at 1.7 vvm were 2.8 times lower than the maximum values (25 g cell DW/L and 73.8 mg tropane alkaloid/L). The effects of the increased aeration rates on cell yield were also evaluated in terms of Reynolds stress. It was found that there was a relation between cell damage and the estimated Reynolds stress. The Reynolds stress estimated for the same aeration rate decreased with increasing cell concentration, suggesting that cells in the cultures at low cell concentrations are subjected to hydrodynamic damage. In the experiments with the cell cultures having a cell concentration of 0.3 (v/v), approximately 70% reduction in cell concentration was observed when the Reynolds stress was increased from 10 to 50 dyn/cm(2). (c) 1993 John Wiley & Sons, Inc.     

Design and validation of a pulsatile perfusion bioreactor for 3D high cell density cultures

This study presents the design and validation of a pulsatile flow perfusion bioreactor able to provide a suitable environment for 3D high cell density cultures for tissue engineering applications. Our bioreactor system is mobile, does not require the use of traditional cell culture incubators and is easy to sterilize. It provides real‐time monitoring and stable control of pH, dissolved oxygen concentration, temperature, pressure, pulsation frequency, and flow rate. In this bioreactor system, cells are cultured in a gel within a chamber perfused by a culture medium fed by hollow fibers. Human umbilical vein endothelial cells (HUVEC) suspended in fibrin were found to be living, making connections and proliferating up to five to six times their initial seeding number after a 48‐h culture period. Cells were uniformly dispersed within the 14.40 mm × 17.46 mm × 6.35 mm chamber. Cells suspended in 6.35‐mm thick gels and cultured in a traditional CO₂ incubator were found to be round and dead. In control experiments carried out in a traditional cell culture incubator, the scarcely found living cells were mostly on top of the gels, while cells cultured under perfusion bioreactor conditions were found to be alive and uniformly distributed across the gel. Biotechnol. Bioeng. 2009; 104: 1215–1223. © 2009 Wiley Periodicals, Inc.     

Scale up production of isoflavonoids in cell suspension cultures of Pueraria tuberosa grown in shake flasks and bioreactor

Cell cultures of Pueraria tuberosa were grown in vessels of different sizes and 2L stirred tank bioreactor containing modified MS medium with morphactin (0.1 mg l^?1) and 2iP (5.0 mg l^?1) and 20% inoculum. Stable growth and total isoflavonoid yield of 76.6 mg l^?1 were recorded in the cultures during scale up. This was in concordance with the persistent yield of the individual isoflavonoids regardless of the vessel size.