Investigation of Gold and Silver Nanoparticles on Absorption Heating and Scattering Imaging

Efficient conversion of absorbed light to heat energy and strong scattering by gold and silver nanoparticles suggest these nanoparticles as the agents of heating and imaging. Absorption efficiency and scattering efficiency of gold and silver nanoparticles were studied through numerical simulation using the discrete dipole approximation method. This study shows that the size of gold and silver nanoparticles can effect gold and silver nanoparticles’ absorption efficiency and scattering efficiency. The gold nanoparticle is found to possess the maximum absorption efficiency when the size of gold nanoparticle is 50 nm and the incident wavelength is 540 nm, and the increasing scattering efficiency with the increasing size of gold nanoparticle in the medium, and refractive index of the medium is around 1.33. However, the silver nanoparticle owns the maximum absorption efficiency when the size of silver nanoparticle is 20 nm and the incident wavelength is 396 nm, and the maximum scattering efficiency when the size of silver nanoparticle is 30 nm and the incident wavelength is 410 nm in the same medium. The conditions for achieving the maximum adsorption efficiency and scattering efficiency of gold and silver nanoparticle can be used for heating and imaging using visible and near-infrared light.     

Hydrophobic silver nanoparticles trapped in lipid bilayers: Size distribution,bilayer phase behavior,and optical properties

Background  

Lipid-based dispersion of nanoparticles provides a biologically inspired route to designing therapeutic agents and a means of reducing nanoparticle toxicity. Little is currently known on how the presence of nanoparticles influences lipid vesicle stability and bilayer phase behavior. In this work, the formation of aqueous lipid/nanoparticle assemblies (LNAs) consisting of hydrophobic silver-decanethiol particles (5.7 ± 1.8 nm) embedded within 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) bilayers is demonstrated as a function of the DPPC/Ag nanoparticle (AgNP) ratio. The effect of nanoparticle loading on the size distribution, bilayer phase behavior, and bilayer fluidity is determined. Concomitantly, the effect of bilayer incorporation on the optical properties of the AgNPs is also examined.     

Highly Sensitive Resonance Scattering Detection of DNA Hybridization Using Aptamer-Modified Gold Nanopaticle as Catalyst

Gold nanoparticle particles in size of 10 nm were used to label the thiol-modified single-stranded DNA aptamer (SH-ssDNA) to obtain an aptamer-modified gold nanoparticle probe (AussDNA) for target DNA (tDNA). In pH 7.4 NaH₂PO₄–Na₂HPO₄ buffer solution, the hybridization reaction between AussDNA and tDNA took place to form larger aptamer-modified gold nanoparticle cluster complex. The excess aptamer-modified gold nanoparticle probe in the supernatant solutions was obtained by centrifuging and can be used as nanocatalyst for the 0.276 mmol/L CuSO₄-65.4 mmol/L potassium-sodium tartrate-0.37 mmol/L glucose system at 70 °C. The cubic Cu₂O particles generated by the nanocatalytic reducing exhibit a strong resonance scattering (RS) peak at 620 nm. In the selected conditions, the RS intensity at 620 nm decreased with addition of tDNA, and the decreased intensity ΔI _{620 nm} is proportional to tDNA concentration (C _tDNA) from 0.12 to 72 pM, with regress equation of ΔI _620 nm = 1.29C _tDNA + 4.05, correlation coefficient of 0.9917, and detection limit of 0.084 pM tDNA.     

Surfactant-induced conformational transition of amyloid β-peptide

Accumulating evidence suggests that Aβ_1–42–membrane interactions may play an important role in the pathogenesis of Alzheimer’s disease. However, the mechanism of this structural transition remains unknown. In this work, we have shown that submicellar concentrations of sodium dodecyl sulfate (SDS) can provide a minimal platform for Aβ_1–42 self-assembly. To further investigate the relation between Aβ_1–42 structure and function, we analyzed peptide conformation and aggregation at various SDS concentrations using circular dichroism (CD), Fourier transform infrared spectroscopy, and gel electrophoresis. These aggregates, as observed via atomic force microscopy, appeared as globular particles in submicellar SDS with diameters of 35–60 nm. Upon sonication, these particles increased in disc diameter to 100 nm. Pyrene I ₃/I ₁ ratios and 1-anilinonaphthalene-8-sulfonic acid binding studies indicated that the peptide interior is more hydrophobic than the SDS micelle interior. We have also used Forster resonance energy transfer between N-terminal labeled pyrene and tyrosine (10) of Aβ_1–42 in various SDS concentrations for conformational analysis. The results demonstrate that SDS at submicellar concentrations accelerates the formation of spherical aggregates, which act as niduses to form large spherical aggregates upon sonication. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Fabrication and characterization of silver nanoparticle and its potential antibacterial activity

In the present research silver nanoparticle was fabricated by chemical reduction of silver salt (Silver nitrate, AgNO₃) solution. Sodium citrate was used as a reducer. The formation of silver nanoparticle was observed visually by color change (greenish yellow). The surface plasmon resonance peak in absorption spectra of silver nanoparticle showed an absorption maximum at 420 nm in UV-VIS spectrometry. The X-ray diffraction pattern showed the presence of sharp reflections at 111, 200, 220, and 311. This would indicate the presence of silver nanoparticle. The scanning electron micrograph revealed that the average size of silver nanoparticle was 21.22 ± 5.17 nm. Silver nanoparticle exhibited better antimicrobial activity against Staphylococcus aureus than the other bacterial pathogens. The correlation coefficient between silver nanoparticles and selected bacterial pathogens revealed that there is a strong negative correlation with Escherichia coli, S. aureus and Klebsiella pneumonia (r = −0.975, −0.993, and −0.998, respectively).     

Stability of Biopolymer Particles Formed by Heat Treatment of β-lactoglobulin/Beet Pectin Electrostatic Complexes

The purpose of this study was to examine the stability of biopolymer particles formed by heating electrostatic complexes of β-lactoglobulin and sugar beet pectin together (pH 5, 80 °C for 15 min). The effects of electrostatic interactions on the formation and stability of the particles were investigated by incorporation of different salt levels (0 to 200 mM NaCl) during the preparation procedure. Biopolymer particles were characterized by turbidity, electrophoretic mobility, dynamic light scattering, and visual observance. Salt inclusion (≥25 mM) prior to heating β-lactoglobulin/pectin complexes led to the formation of large biopolymer particles (d > 1,000 nm) that rapidly sedimented, but salt inclusion after heating (0 to 200 mM) led to the formation of biopolymer particles that remained relatively small (d < 350 nm) and were stable to sedimentation. The biopolymer particles formed in the absence of salt remained stable over a wide range of pH values (e.g., pH 3 to 7 in the presence of 200 mM NaCl). These biopolymer particles may therefore be suitable for application in a number of food products as delivery systems, clouding agents, or texture modifiers.     

Rapid biological synthesis of platinum nanoparticles using <Emphasis Type="Italic">Ocimum sanctum</Emphasis> for water electrolysis applications

The leaf extract of Ocimum sanctum was used as a reducing agent for the synthesis of platinum nanoparticles from an aqueous chloroplatinic acid (H₂PtCl₆·6H₂O). A greater conversion of platinum ions to nanoparticles was achieved by employing a tulsi leaf broth with a reaction temperature of 100 °C. Energy-dispersive absorption X-ray spectroscopy confirmed the platinum particles as major constituent in the reduction process. It is evident from scanning electron microscopy that the reduced platinum particles were found as aggregates with irregular shape. Fourier-transform infrared spectroscopy revealed that the compounds such as ascorbic acid, gallic acid, terpenoids, certain proteins and amino acids act as reducing agents for platinum ions reduction. X-ray diffraction spectroscopy suggested the associated forms of platinum with other molecules and the average particle size of platinum nanoparticle was 23 nm, calculated using Scherer equation. The reduced platinum showed similar hydrogen evolution potential and catalytic activity like pure platinum using linear scan voltammetry. This environmentally friendly method of biological platinum nanoparticles production increases the rates of synthesis faster which can potentially be used in water electrolysis applications.     

Cytopathology of Apple stem pitting virus in Nicotiana occidentalis L.

Apple stem pitting virus (ASPV) is a causal agent of stem pitting associated disease in pomes fruit trees. The present report focuses on a cytopathological effect of ASPV infection in a herbaceous host Nicotiana occidentalis ‘37B’. A leaf dip preparation shows predominantly basic virus particles and aggregated particles 800 nm and 3200 nm long respectively. The main cytopathological effect observed in ASPV infected N. occidentalis includes fibrous aggregates of virus particles (massive/or few), formation of membranous vesicles and proliferation of the endoplasmic reticulum.     

Photoinduced Disaggregation of TiO2 Nanoparticles Enables Transdermal Penetration

Under many aqueous conditions, metal oxide nanoparticles attract other nanoparticles and grow into fractal aggregates as the result of a balance between electrostatic and Van Der Waals interactions. Although particle coagulation has been studied for over a century, the effect of light on the state of aggregation is not well understood. Since nanoparticle mobility and toxicity have been shown to be a function of aggregate size, and generally increase as size decreases, photo-induced disaggregation may have significant effects. We show that ambient light and other light sources can partially disaggregate nanoparticles from the aggregates and increase the dermal transport of nanoparticles, such that small nanoparticle clusters can readily diffuse into and through the dermal profile, likely via the interstitial spaces. The discovery of photoinduced disaggregation presents a new phenomenon that has not been previously reported or considered in coagulation theory or transdermal toxicological paradigms. Our results show that after just a few minutes of light, the hydrodynamic diameter of TiO₂ aggregates is reduced from ∼280 nm to ∼230 nm. We exposed pigskin to the nanoparticle suspension and found 200 mg kg⁻¹ of TiO₂ for skin that was exposed to nanoparticles in the presence of natural sunlight and only 75 mg kg⁻¹ for skin exposed to dark conditions, indicating the influence of light on NP penetration. These results suggest that photoinduced disaggregation may have important health implications.     

Protein adsorption onto nanoparticles induces conformational changes: Particle size dependency,kinetics, and mechanisms

The use of nanomaterials in bioapplications demands a detailed understanding of protein–nanoparticle interactions. Proteins can undergo conformational changes while adsorbing onto nanoparticles, but studies on the impact of particle size on conformational changes are scarce. We have shown that conformational changes happening upon adsorption of myoglobin and BSA are dependent on the size of the nanoparticle they are adsorbing to. Out of eight initially investigated model proteins, two (BSA and myoglobin) showed conformational changes, and in both cases this conformational change was dependent on the size of the nanoparticle. Nanoparticle sizes ranged from 30 to 1000 nm and, in contrast to previous studies, we attempted to use a continuous progression of sizes in the range found in live viruses, which is an interesting size of nanoparticles for the potential use as drug delivery vehicles. Conformational changes were only visible for particles of 200 nm and bigger. Using an optimized circular dichroism protocol allowed us to follow this conformational change with regard to the nanoparticle size and, thanks to the excellent temporal resolution also in time. We uncovered significant differences between the unfolding kinetics of myoglobin and BSA. In this study, we also evaluated the plausibility of commonly used explanations for the phenomenon of nanoparticle size‐dependent conformational change. Currently proposed mechanisms are mostly based on studies done with relatively small particles, and fall short in explaining the behavior seen in our studies.     

Novel fabrication of gelatin-encapsulated copper nanoparticles using Aspergillus versicolor and their application in controlling of rotting plant pathogens

The fabrication of copper nanoparticles (CuNPs) with smallest size and more stability, with potential effects in plant disease management, may need a modified protocol for green synthesis. In this study, we could biosynthesize stable CuNPs extracellularly by an eco-friendly route using A. versicolor. The biosynthesis of nanoparticles was confirmed by UV–visible spectroscopy, Fourier transform infrared (FTIR), transmission electron microscope (TEM) and dynamic light scattering (DLS) techniques. CuNPs have a size range of 23–82 nm with round to polygonal shape. Antifungal study showed that CuNPs have potential antifungal activity against rotting plant pathogens, where 3.2 and 2.8 µg ml⁻¹ of nanoparticle solution totally inhibited the growth of both Fusarium oxysporum and Phytophthora parasitica, respectively. Damaged hyphae with limited deformed spores were detected through scanning electron microscope (SEM) analysis after the treatment of both pathogens with CuNPs. Between all tested polymers, gelatin-encapsulated nanoparticles were characterized ‘by their smallest size, 7–33 nm, and regular spherical shape at all experimental conditions. After 6 months of storage, gelatin-CuNPs maintained full nanoscale and antifungal properties compared with uncoated particles which lost these properties after only 1 month. It is concluded that CuNPs can be biosynthesized by an eco-friendly cheap method using A. versicolor and can be preserved stably for a long time with the smallest size and full antifungal activity by their encapsulation with gelatin as a natural polymer. These nanoparticles can be used safely in the management of plant rotting fungi.

     

Preparation and characterizations of self-assembled PEGylated gelatin nanoparticles

The PEGylated gelatin nanoparticles were prepared by self-assembling method and characterized. The gelatin drug carrier was proposed as a targeting drug delivery system with the hypothesis that the gelatin carrier could be degraded by the matrix metalloprotease (MMP) and release the anticancer drug loaded inside carriers around the cancer site. The gelatin nanoparticles proposed in this study were composed of deoxycholic acid (DOCA), monomethoxy polyethylene glycol (MPEG), and gelatin. The carboxyl groups of DOCA and carboxylated MPEG were coupled with amine group of gelatin by dichlorohexylcarbodiimide (DCC) method. One molecule of gelatin coupled with 205 molecules of MPEG and 275 molecules of DOCA. The synthesized gelatin/DOCA/MPEG conjugates (GDM) were ultrasonicated to produce self-assembled nanoparticles. DOCA acted as the hydrophobic core, thereby aggregating gelatin molecules and hydrophilic MPEG chains located at the surface of the nanoparticles. The concentration of GDM, intensity of sonication, sonication time and temperature, all affected to control the particle size in the ultrasonication. The optimum condition was obtained as 1.0 mg/mL of GDM, 28 W for sonication intensity, 3 min of sonication time, and room temperature. The size distribution of particle was found to be 100–1000 nm in this condition. The particles which had a broad size distribution were filtered by 0.2 μm membrane. The product yield of particles having below 200 nm of size was about 30%. After filtration, an average diameter of GDM nanoparticle was 176 nm (155–200 nm).     

Microbial synthesis of gold nanoparticles using the fungus <Emphasis Type="Italic">Penicillium brevicompactum</Emphasis> and their cytotoxic effects against mouse mayo blast cancer C<Subscript>2</Subscript>C<Subscript>12</Subscript> cells

Microorganisms, their cell filtrates, and live biomass have been utilized for synthesizing various gold nanoparticles. The shape, size, stability as well as the purity of the bio synthesized nanoparticles become very essential for application purpose. In the present study, gold nanoparticles have been synthesized from the supernatant, live cell filtrate, and biomass of the fungus Penicillium brevicompactum. The fungus has been grown in potato dextrose broth which is also found to synthesize gold nanoparticles. The size of the particles has been investigated by Bio-TEM before purification, following purification and after storing the particles for 3 months under refrigerated condition. Different characterization techniques like X-ray diffraction, Fourier transform infrared spectroscopy, and UV–visible spectroscopy have been used for analysis of the particles. The effect of reaction parameters such as pH and concentration of gold salt have also been monitored to optimize the morphology and dispersity of the synthesized gold nanoparticles. A pH range of 5 to 8 has favored the synthesis process whereas increasing concentration of gold salt (beyond 2 mM) has resulted in the formation of bigger sized and aggregated nanoparticles. Additionally, the cytotoxic nature of prepared nanoparticles has been analyzed using mouse mayo blast cancer C₂C₁₂ cells at different time intervals (24, 48, and 72 h) of incubation period. The cells are cultivated in Dulbecco’s modified Eagle’s medium supplemented with fetal bovine serum with antibiotics (streptopenicillin) at 37°C in a 5% humidified environment of CO₂. The medium has been replenished every other day, and the cells are subcultured after reaching the confluence. The viability of the cells is analyzed with 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide method.     

A Simple and Sensitive SPRS Method for Trace H2O2 Based on the TiO2+ Complex and Gold Nanoparticles Aggregation Reactions

In the medium of H₂SO₄ and in the presence of TiO²⁺, gold nanoparticles in size of 10 nm exhibited a weak surface plasmon resonance scattering (SPRS) peak at 775 nm. Upon addition of trace H₂O₂, the yellow complex [TiO(H₂O₂)]²⁺ formed that cause the gold nanoparticles aggregations to form bigger gold nanoparticle clusters in size of about 900 nm, and the SPRS intensity at 775 nm (I) enhanced greatly. The enhanced intensity ΔI was linear to the H₂O₂ concentration in the range of 0.025–48.7 μg/mL, with a detection limit of 0.014 μg/mL H₂O₂. This SPRS method was applied to determining H₂O₂ in water samples with satisfactory results.     

Interaction of fibrinogen with magnetite nanoparticles

The interaction between fibrinogen and magnetite nanoparticles in solution has been studied by the methods of spin labeling, ferromagnetic resonance, dynamic and Rayleigh light scattering. It is shown that protein molecules adsorb on the surface of nanoparticles to form multilayer protein covers. The number of molecules adsorbed on one nanoparticle amounts to ∼65 and the thickness of the adsorption layer amounts to ∼27 nm. Separate nanoparticles with fibrinogen covers (clusters) form aggregates due to interactions of the end D domains of fibrinogen. Under the influence of direct magnetic field, nanoparticles with adsorbed proteins form linear aggregates parallel to the force lines. It is shown that the rate of protein coagulation during the formation of fibrin gel under the action of thrombin on fibrinogen decreases ∼2 times in the presence of magnetite nanoparticles, and the magnitude of the average fiber mass/length ratio grows.     

Preparation of budesonide and budesonide-PLA microparticles using supercritical fluid precipitation technology

The objective of this study was to prepare and characterize microparticles of budesonide alone and budesonide and polylactic acid (PLA) using supercritical fluid (SCF) technology. A precipitation with a compressed antisolvent (PCA) technique employing supercritical CO₂ and a nozzle with 100-μm internal diameter was used to prepare microparticles of budesonide and budesonide-PLA. The effect of various operating variables (temperature and pressure of CO₂ and flow rates of drug-polymer solution and/or CO₂) and formulation variables (0.25%, 0.5%, and 1% budesonide in methylene chloride) on the morphology and size distribution of the microparticles was determined using scanning electron microscopy. In addition, budesonide-PLA particles were characterized for their surface charge and drug-polymer interactions using a zeta meter and differential scanning calorimetry (DSC), respectively. Furthermore, in vitro budesonide release from budesonide-PLA microparticles was determined at 37°C. Using the PCA process, budesonide and budesonide-PLA microparticles with mean diameters of 1 to 2 μm were prepared. An increase in budesonide concentration (0.25%–1% wt/vol) resulted in budesonide microparticles that were fairly spherical and less aggiomerated. In addition, the size of the microparticles increased with an increase in the drug-polymer solution flow rate (1.4–4.7 mL/min) or with a decrease in the CO₂ flow rate (50–10 mL/min). Budesonide-PLA microparticles had a drug loading of 7.94%, equivalent to ∼80% encapsulation efficiency. Budesonide-PLA microparticles had a zeta potential of— 37±4 mV, and DSC studies indicated that SCF processing of budesonide-PLA microparticles resulted in the loss of budesonide crystallinity. Finally, in vitro drug release studies at 37°C indicated 50% budesonide release from the budesonide-PLA microparticles at the end of 28 days. Thus, the PCA process was successful in producing budesonide and budesonide-PLA microparticles. In addition, budesonide-PLA microparticles sustained budesonide release for 4 weeks.     

Comparison of acute responses of mice livers to short-term exposure to nano-sized or micro-sized silver particles

Mice were fed either 13 nm silver nanoparticles or 2–3.5 μm silver microparticles. The livers were then obtained after 3 days and subjected to a histopathological analysis. The nanoparticle-fed and microparticle-fed livers both exhibited lymphocyte infiltration in the histopathological analysis, suggesting the induction of inflammation. In vitro, a human hepatoma cell line (Huh-7) was treated with the same silver nanoparticles and microparticles. The mitochondrial activity and glutathione production were hardly affected. However, the DNA contents decreased 15% in the nanoparticle-treated cells and 10% in the microparticle-treated cell, suggesting a more potent induction of apoptosis by the nanoparticles. From a microarray analysis of the RNA from the livers of the nano- and micro-particle-fed mice, the expression of genes related to apoptosis and inflammation was found to be altered. These gene expression changes in the nanoparticle-treated livers lead to phenotypical changes, reflecting increased apoptosis and inflammation. The changes in the gene expression were confirmed by using a semi-quantitative RT-PCR.     

Fabrication and Characterization of Polyelectrolyte Microparticles with Protein

The incorporation of proteins into microparticles fabricated by layer-by-layer adsorption of oppositely charged polyelectrolytes (dextran sulfate and protamine) on protein microaggregates was studied. Microaggregates with insulin were prepared by two different techniques: 1) formation of insoluble polyelectrolyte complex consisting of insulin and dextran sulfate (aggregate size of 7-20 micro m), or 2) salting out of insulin from solution by sodium chloride (aggregate size of 5-13 micro m). Microparticles varying in the number of cycles (from 1 to 8) of polyelectrolyte adsorption on protein aggregates were examined and compared. Morphology of the microparticles was studied by scanning electron and optical microscopy. It was shown that polyelectrolyte microparticles retained the shape and dimensions of the initial protein aggregates used as a template. Ultrasonication of microparticles obtained using salted out protein aggregates resulted in the formation of stable nanoparticles (100-200 nm). Regulation of protein release from the microparticles of both types by varying the number of polyelectrolyte adsorption cycles and pH of the medium was demonstrated. Insulin not bound to polyelectrolytes was released from the microparticles at pH values between 6 and 8, which corresponds to the pH of the human small intestine and ileum.     

Preparation of gold nanopowders and nanoparticles using chitosan suspensions

Simple methods for preparation of gold nanopowders and nanoparticles are reported. Gold/chitosan nanoparticles were prepared by using basic chitosan suspension as a dispersant and as a reductant. The resulting nanoparticles were processed by pyrolysis and thus obtain black gold nanopowder. The FESEM images indicate that most diameters of the nanopowder prepared were in the range of 50 and 200 nm. Hydrolysis is another quick decomposition method for chitosan. Acetic acid was adopted to implement the hydrolysis. The AEM images of the auberginic suspension show that the average gold nanoparticle diameter was less than 40 nm with good dispersion. Use of chitosan suspensions can produce gold nanopowder as well as gold nanoparticle without using toxic organic chemicals.     

Luminescence Study of Silver Nanoparticles Obtained by Annealed Ionic Exchange Silicate Glasses

The photoluminescence of silver nanoparticles glasses obtained by ionic exchange and annealing is investigated for various ionic exchange times. These glasses are prepared by immersion of silicate glass samples in a molten salt bath of molar concentration 10% AgNO₃ in NaNO₃ at T = 320 °C. Scanning electron microscopy measurement in electron diffraction scattering (EDS) configuration confirms the silver presence in the various glasses, and the UV/visible absorption gives the evolution of the spectra after ionic exchange and plasmon resonance apparition after annealing. After annealing at 450 °C, both diagnostics inform us about the particles’ formation and the silver rediffusion. Silver nanoparticle growth after annealing prior leads to photoluminescence exaltation and quenching for the longest exchange samples. Subsequently, we propose potential mechanisms of the nanoparticle formation with an initial depolymerization of the silicate network during the ionic exchange and repolymerization during annealing.