Sampling nucleotide diversity in cotton

Background  

Cultivated cotton is an annual fiber crop derived mainly from two perennial species, Gossypium hirsutum L. or upland cotton, and G. barbadense L., extra long-staple fiber Pima or Egyptian cotton. These two cultivated species are among five allotetraploid species presumably derived monophyletically between G. arboreum and G. raimondii. Genomic-based approaches have been hindered by the limited variation within species. Yet, population-based methods are being used for genome-wide introgression of novel alleles from G. mustelinum and G. tomentosum into G. hirsutum using combinations of backcrossing, selfing, and inter-mating. Recombinant inbred line populations between genetics standards TM-1, (G. hirsutum) × 3-79 (G. barbadense) have been developed to allow high-density genetic mapping of traits.     

Genetic dissection of lint yield and fiber quality traits of <Emphasis Type="Italic">G. hirsutum</Emphasis> in <Emphasis Type="Italic">G. barbadense</Emphasis> background

Gossypium hirsutum L. is a widely cultivated species characterized by its high yield and wide environmental adaptability, while Gossypium barbadense is well known for its superior fiber quality. In the present report, we, for the first time, developed G. hirsutum chromosome segment introgression lines (ILs) in a G. barbadense background (GhILs_Gb) and genetically dissected the inheritance of lint yield and fiber quality of G. hirsutum in G. barbadense background. The GhILs_Gb contains introgressed segments spanning 4121.20 cM, which represents 82.20% of the tetraploid cotton genome, with an average length of 18.65 cM. A total of 39 quantitative trait loci (QTLs) for six traits are identified in this IL population planted in Xinjiang. Four QTL clusters are detected. Of them, however, three clusters have deleterious effects on fiber length and strength and boll weight, and only one cluster on Chr. D9 can be used in marker-assisted selection (MAS) to increase lint percentage and decrease micronaire value in G. barbadense. QTL mapping showed that most of yield-related QTLs detected have positive effects and increase lint yield in G. barbadense, while most of fiber quality-related QTLs have deleterious effects except for micronaire. It suggested that G. hirsutum evolved to have a high lint yield. Several lines improved in lint percentage and boll size in G. barbadense by introgressed one fragment of G. hirsutum have been developed from the GhILs_Gb. The ILs developed, and the analyses presented here will enhance the understanding of the genetics of lint yield and fiber quality in G. hirsutum and facilitate further molecular breeding to improve lint yield in G. barbadense.     

Genetic diversity and relationships of diploid and tetraploid cottons revealed using AFLP

Gossypium species (± 49) represent a vast resource of genetic diversity for the improvement of cultivated cotton. To determine intra- and inter-specific genetic relationships within a diverse collection of Gossypium taxa, we employed 16 AFLP primer combinations on three diploid species, Gossypium herbaceum L. (A1), Gossypium arboreum L. (A2) and Gossypium raimondii Ulbrich (D5), and 26 AD allotetraploid accessions (Gossypium barbadense L. and Gossypium hirsutum L.). A total of 1180 major AFLP bands were observed; 368 of these (31%) were polymorphic. Genetic similarities among all taxa ranged from 0.21 (between the diploid species G. arboreum and G. raimondii) up to 0.89 (within G. barbadense). Phenetic trees based on genetic similarities (UPGMA, N-J) were consistent with known taxonomic relationships. In some cases, well-supported phylogenetic relationships, as well as evidence of genetic reticulation, could also be inferred. UPGMA trees and principal coordinate analysis based on genetic similarity matrices were used to identify genetically distinct cultivars that are potentially important sources of germplasm for cotton improvement, particularly of fiber quality traits. We show that AFLP is useful for estimating genetic relationships across a wide range of taxonomic levels, and for analyzing the evolutionary and historical development of cotton cultivars at the genomic level. Received: 17 January 2000 / Accepted: 4 May 2000     

Inheritance of long staple fiber quality traits of Gossypium barbadense in G. hirsutum background using CSILs

Gossypium hirsutum is a high yield cotton species that exhibits only moderate performance in fiber qualities. A promising but challenging approach to improving its phenotypes is interspecific introgression, the transfer of valuable traits or genes from the germplasm of another species such as G. barbadense, an important cultivated extra long staple cotton species. One set of chromosome segment introgression lines (CSILs) was developed, where TM-1, the genetic standard in G. hirsutum, was used as the recipient parent and the long staple cotton G. barbadense Hai7124 was used as the donor parent by molecular marker-assisted selection (MAS) in BC₅S_1–4 and BC₄S_1–3 generations. After four rounds of MAS, the CSIL population was comprised of 174 lines containing 298 introgressed segments, of which 86 (49.4%) lines had single introgressed segments. The total introgressed segment length covered 2,948.7 cM with an average length of 16.7 cM and represented 83.3% of tetraploid cotton genome. The CSILs were highly varied in major fiber qualities. By integrated analysis of data collected in four environments, a total of 43 additive quantitative trait loci (QTL) and six epistatic QTL associated with fiber qualities were detected by QTL IciMapping 3.0 and multi-QTL joint analysis. Six stable QTL were detected in various environments. The CSILs developed and the analyses presented here will enhance the understanding of the genetics of fiber qualities in long staple G. barbadense and facilitate further molecular breeding to improve fiber quality in Upland cotton.     

Inter-Specific Differences in Cotton for Nutrient Partitioning from Subtending Leaves to Reproductive Parts at Various Developmental Stages: Consequences for Fruit Growth and Yield

A field study was carried out to unravel the inter-specific differences in cotton for the partitioning of N, P, K, S, Ca, Mg, Na and Cl from the subtending leaves to the reproductive parts of Gossypium hirsutum, G. barbadense and G. arboreum at various developmental stages. Results revealed significant differences among the species for the various parameters studied. Overall there was a greater fresh and dry matter yield of various reproductive parts and subtending leaves of G. hirsutum and G. barbadense than G. arboreum, although the leaf photosynthetic rate was similar. Age-dependent increase in leaf area/leaf mass ratio indicated a greater partitioning of earlier acquired assimilates to the growth of reproductive parts. Results indicated greater partitioning of N, P, S and Ca during later reproductive growth (from boll production to its opening) in G. hirsutum and G. barbadense but during earlier reproductive growth in G. arboreum (from bud up to flower formation) as was evident by decreased subtending leaf/reproductive parts ratio. It is concluded that better N, P, S and Ca partitioning ability of G. hirsutum and G. barbadense at the onset of boll development played a major role in the better yield and good quality fiber characteristics. This revised version was published online in July 2006 with corrections to the Cover Date.     

Isolation, characterization and mapping of genes differentially expressed during fibre development between Gossypium hirsutum and G. barbadense by cDNA-SRAP

Gossypium hirsutum and G. barbadense are two cultivated tetraploid cotton species with differences in fibre quality. The fibre of G. barbadense is longer, stronger and finer than that of G. hirsutum. To isolate genes expressed differently between the two species during fibre development, cDNA-SRAP (sequence-related amplified polymorphism) was applied. This technique was used to analyse genes at different stages of fibre development in G. hirsutum cv. Emian22 and G. barbadense acc. 3-79, the parents of our interspecific mapping population. A total of 4096 SRAP primer combinations were used to screen polymorphism between the DNA of the parents, and 275 highly polymorphic primers were picked out to analyse DNA and RNA from leaves and fibres at different developmental stages of the parents. A total of 168 DNA fragments were isolated from gels and sequenced: 54, 30, 38 and 41 from fibres of 5, 10, 15 and 20 days post-anthesis, respectively, and five from multi stages. To genetically map these sequences, 104 sequence-specific primers were developed and were used to screened polymorphism between the mapping parents. Finally, six markers were mapped on six chromosomes of our backbone interspecific genetic map. This work can give us a primary knowledge of differences in mechanism of fibre development between G. hirsutum and G. barbadense.     

Molecular dissection of interspecific variation between Gossypium hirsutum and Gossypium barbadense (cotton) by a backcross-self approach: I. Fiber elongation

The current study is the first installment of an effort to explore the secondary gene pool for the enhancement of Upland cotton (Gossypium hirsutum L.) germplasm. We developed advanced-generation backcross populations by first crossing G. hirsutum cv. Tamcot 2111 and G. barbadense cv. Pima S6, then independently backcrossing F₁ plants to the G. hirsutum parent for three cycles. Genome-wide mapping revealed introgressed alleles at an average of 7.3% of loci in each BC₃F₁ plant, collectively representing G. barbadense introgression over about 70% of the genome. Twenty-four BC₃F₁ plants were selfed to generate 24 BC₃F₂ families of 22–172 plants per family (totaling 2,976 plants), which were field-tested for fiber elongation and genetically mapped. One-way analysis of variance detected 22 non-overlapping quantitative trail loci (QTLs) distributed over 15 different chromosomes. The percentage of variance explained by individual loci ranged from 8% to 28%. Although the G. barbadense parent has lower fiber elongation than the G. hirsutum parent, the G. barbadense allele contributed to increased fiber elongation at 64% of the QTLs. Two-way analysis of variance detected significant (P<0.001) among-family genotype effects and genotype×family interactions in two and eight regions, respectively, suggesting that the phenotypic effects of some introgressed chromosomal segments are dependent upon the presence/absence of other chromosomal segments.Electronic Supplementary Material Supplementary material is available for this article at     

Genetic mapping of new cotton fiber loci using EST-derived microsatellites in an interspecific recombinant inbred line cotton population

There is an immediate need for a high-density genetic map of cotton anchored with fiber genes to facilitate marker-assisted selection (MAS) for improved fiber traits. With this goal in mind, genetic mapping with a new set of microsatellite markers [comprising both simple (SSR) and complex (CSR) sequence repeat markers] was performed on 183 recombinant inbred lines (RILs) developed from the progeny of the interspecific cross Gossypium hirsutum L. cv. TM1 × Gossypium barbadense L. Pima 3-79. Microsatellite markers were developed using 1557 ESTs-containing SSRs (≥10 bp) and 5794 EST-containing CSRs (≥12 bp) obtained from ~14,000 consensus sequences derived from fiber ESTs generated from the cultivated diploid species Gossypium arboreum L. cv AKA8401. From a total of 1232 EST-derived SSR (MUSS) and CSR (MUCS) primer-pairs, 1019 (83%) successfully amplified PCR products from a survey panel of six Gossypium species; 202 (19.8%) were polymorphic between the G. hirsutum L. and G. barbadense L. parents of the interspecific mapping population. Among these polymorphic markers, only 86 (42.6%) showed significant sequence homology to annotated genes with known function. The chromosomal locations of 36 microsatellites were associated with 14 chromosomes and/or 13 chromosome arms of the cotton genome by hypoaneuploid deficiency analysis, enabling us to assign genetic linkage groups (LG) to specific chromosomes. The resulting genetic map consists of 193 loci, including 121 new fiber loci not previously mapped. These fiber loci were mapped to 19 chromosomes and 11 LG spanning 1277 cM, providing approximately 27% genome coverage. Preliminary quantitative trait loci analysis suggested that chromosomes 2, 3, 15, and 18 may harbor genes for traits related to fiber quality. These new PCR-based microsatellite markers derived from cotton fiber ESTs will facilitate the development of a high-resolution integrated genetic map of cotton for structural and functional study of fiber genes and MAS of genes that enhance fiber quality. Electronic Supplementary Material Supplementary material is available for this article at Names are necessary to report factually on available data, however, the USDA neither guarantees nor warrants the standard of products or service, and the use of the name by the USDA implies no approval of the products or service to the exclusion of others that may also be suitable.     

Biosynthesis of UDP-xylose: characterization of membrane-bound At<Emphasis Type="Italic">Uxs2</Emphasis>

UDP-xylose (UDP-Xyl) is a sugar donor for the synthesis of glycoproteins, polysaccharides, various metabolites, and oligosaccharides in plants, vertebrates, and fungi. In plants, the biosynthesis of UDP-Xyl from UDP-glucuronic acid (UDP-GlcA) appears to be catalyzed by numerous UDP-glucuronic acid decarboxylase (Uxs) isoforms. For example, six Uxs isoforms in Arabidopsis thaliana (L.) and four in rice have been identified. However, the reason/s for the existence of several isoforms that are necessary for the synthesis of UDP-Xyl remains unknown. Here, we describe a Uxs isoform in Arabidopsis, AtUXS2, encoding an integral membrane protein that appears to be localized to the Golgi apparatus. The enzyme is a dimer and has distinct properties. Unlike the UXS3 isoform, which is shown here to be a soluble protein, the UXS2 isoform is membrane bound. The characteristics of the membrane-bound AtUxs2 and cytosolic AtUxs3 support the hypothesis that unique UDP-GlcA-DCs possessing distinct sub-cellular localizations can spatially regulate specific xylosylation events in plant cells.     

Genetic mapping and QTL analysis of fiber-related traits in cotton (<Emphasis Type="Italic">Gossypium</Emphasis>)

Cotton, the leading natural fiber crop, is largely produced by two primary cultivated allotetraploid species known as Upland or American cotton (Gossypium hirsutum L.) and Pima or Egyptian cotton (G. barbadense L.). The allotetraploid species diverged from each other and from their diploid progenitors (A or D genome) through selection and domestication after polyploidization. To analyze cotton AD genomes and dissect agronomic traits, we have developed a genetic map in an F₂ population derived from interspecific hybrids between G. hirsutum L. cv. Acala-44 and G. barbadense L. cv. Pima S-7. A total of 392 genetic loci, including 333 amplified fragment length polymorphisms (AFLPs), 47 simple sequence repeats (SSRs), and 12 restriction fragment length polymorphisms (RFLPs), were mapped in 42 linkage groups, which span 3,287 cM and cover approximately 70% of the genome. Using chromosomal aneuploid interspecific hybrids and a set of 29 RFLP and SSR framework markers, we assigned 19 linkage groups involving 223 loci to 12 chromosomes. Comparing four pairs of homoeologous chromosomes, we found that with one exception linkage distances in the A-subgenome chromosomes were larger than those in their D-subgenome homoeologues, reflecting higher recombination frequencies and/or larger chromosomes in the A subgenome. Segregation distortion was observed in 30 out of 392 loci mapped in cotton. Moreover, approximately 29% of the RFLPs behaved as dominant loci, which may result from rapid genomic changes. The cotton genetic map was used for quantitative trait loci (QTL) analysis using composite interval mapping and permutation tests. We detected seven QTLs for six fiber-related traits; five of these were distributed among A-subgenome chromosomes, the genome donor of fiber traits. The detection of QTLs in both the A subgenome in this study and the D subgenome in a previous study suggests that fiber-related traits are controlled by the genes in homoeologous genomes, which are subjected to selection and domestication. Some chromosomes contain clusters of QTLs and presumably contribute to the large amount of phenotypic variation that is present for fiber-related traits.Communicated by J. Dvorak     

Structure, expression differentiation and evolution of duplicated fiber developmental genes in Gossypium barbadense and G. hirsutum

Background  

Both Gossypium hirsutum and G. barbadense probably originated from a common ancestor, but they have very different agronomic and fiber quality characters. Here we selected 17 fiber development-related genes to study their structures, tree topologies, chromosomal location and expression patterns to better understand the interspecific divergence of fiber development genes in the two cultivated tetraploid species.     

Duplication,divergence and persistence in the Phytochrome photoreceptor gene family of cottons (<Emphasis Type="Italic">Gossypium</Emphasis> spp.)

Background  

Phytochromes are a family of red/far-red photoreceptors that regulate a number of important developmental traits in cotton (Gossypium spp.), including plant architecture, fiber development, and photoperiodic flowering. Little is known about the composition and evolution of the phytochrome gene family in diploid (G. herbaceum, G. raimondii) or allotetraploid (G. hirsutum, G. barbadense) cotton species. The objective of this study was to obtain a preliminary inventory and molecular-evolutionary characterization of the phytochrome gene family in cotton.     

Expansion of MIR482/2118 by a class‐II transposable element in cotton

Some plant microRNA (miRNA) families contain multiple members generating identical or highly similar mature miRNA variants. Mechanisms underlying the expansion of miRNA families remain elusive, although tandem and/or segmental duplications have been proposed. In this study of two tetraploid cottons, Gossypium hirsutum and Gossypium barbadense, and their extant diploid progenitors, Gossypium arboreum and Gossypium raimondii, we investigated the gain and loss of members of the miR482/2118 superfamily, which modulates the expression of nucleotide‐binding site leucine‐rich repeat (NBS‐LRR) disease resistance genes. We found significant expansion of MIR482/2118d in G. barbadense, G. hirsutum and G. raimondii, but not in G. arboreum. Several newly expanded MIR482/2118d loci have mutated to produce different miR482/2118 variants with altered target‐gene specificity. Based on detailed analysis of sequences flanking these MIR482/2118 loci, we found that this expansion of MIR482/2118d and its derivatives resulted from an initial capture of an MIR482/2118d by a class‐II DNA transposable element (TE) in G. raimondii prior to the tetraploidization event, followed by transposition to new genomic locations in G. barbadense, G. hirsutum and G. raimondii. The ‘GosTE’ involved in the capture and proliferation of MIR482/2118d and its derivatives belongs to the PIF/Harbinger superfamily, generating a 3‐bp target site duplication upon insertion at new locations. All orthologous MIR482/2118 loci in the two diploids were retained in the two tetraploids, but mutation(s) in miR482/2118 were observed across all four species as well as in different cultivars of both G. barbadense and G. hirsutum, suggesting a dynamic co‐evolution of miR482/2118 and its NBS‐LRR targets. Our results provide fresh insights into the mechanisms contributing to MIRNA proliferation and enrich our knowledge on TEs.     

GbEXPATR,a species‐specific expansin,enhances cotton fibre elongation through cell wall restructuring

Cotton provides us the most important natural fibre. High fibre quality is the major goal of cotton breeding, and introducing genes conferring longer, finer and stronger fibre from Gossypium barbadense to Gossypium hirsutum is an important breeding strategy. We previously analysed the G. barbadense fibre development mechanism by gene expression profiling and found two homoeologous fibre‐specific α‐expansins from G. barbadense, GbEXPA2 and GbEXPATR. GbEXPA2 (from the D_T genome) is a classical α‐expansin, while its homoeolog, GbEXPATR (A_T genome), encodes a truncated protein lacking the normal C‐terminal polysaccharide‐binding domain of other α‐expansins and is specifically expressed in G. barbadense. Silencing EXPA in G. hirsutum induced shorter fibres with thicker cell walls. GbEXPA2 overexpression in G. hirsutum had no effect on mature fibre length, but produced fibres with a slightly thicker wall and increased crystalline cellulose content. Interestingly, GbEXPATR overexpression resulted in longer, finer and stronger fibres coupled with significantly thinner cell walls. The longer and thinner fibre was associated with lower expression of a number of secondary wall‐associated genes, especially chitinase‐like genes, and walls with lower cellulose levels but higher noncellulosic polysaccharides which advocated that a delay in the transition to secondary wall synthesis might be responsible for better fibre. In conclusion, we propose that α‐expansins play a critical role in fibre development by loosening the cell wall; furthermore, a truncated form, GbEXPATR, has a more dramatic effect through reorganizing secondary wall synthesis and metabolism and should be a candidate gene for developing G. hirsutum cultivars with superior fibre quality.     

Evaluation of Gossypium species for resistance to cotton leaf curl Burewala virus

Cotton leaf curl disease (CLCuD), caused by cotton leaf curl Burewala virus (CLCuBV), has emerged as a major threat to cotton production in Pakistan. Resistance to CLCuBV was evaluated in cultivated and wild cotton genotypes representing six Gossypium species by visual symptom scoring and virus assessment using PCR tests. Considerable variation in responses was observed when using whitefly and graft transmission to inoculate Gossypium genotypes with CLCuBV in field and greenhouse experiments. Under field evaluation, all cultivated genotypes of Gossypium hirsutum and three genotypes of G. barbadense were susceptible. Eleven genotypes that represented six wild and cultivated Gossypium species were considered to be highly resistant as they were free from infection. Similar results were obtained when these genotypes were tested using whitefly transmission. To verify these findings, 132 cultivated and wild genotypes were tested by graft inoculation. All G. hirsutum genotypes (116 cultivated, 1 wild, 1 transgenic Coker-312 and 1 non-transgenic Coker-312), three G. barbadense genotypes and one G. thurberi genotype were highly susceptible and exhibited symptoms 9–12 days after grafting. Four genotypes of G. arboreum and one genotype of G. anomalum did not express symptoms but had a detectable level of virus. One genotype of G. herbaceum and three wild genotypes of G. hirsutum showed mild symptoms (severity indexes of 1–2) and exhibited delayed disease development. These genotypes were classified as moderately resistant to resistant. Resistant genotypes that were identified in this study will be useful sources for exploitation of breeding programmes aimed at developing CLCuBV-resistant varieties and increasing genetic diversity.     

A Comparison of Leaf Anatomy in Field-grown Gossypium hirsutum and G. barbadense

Gossypium hirsutum L. (upland cotton) and G. barbadense L. (Pimacotton) are two of the most important fibre producing cottonspecies in cultivation. When grown side-by-side in the field,G.hirsutum has higher photosynthetic and transpiration rates (Luet al., 1997. Australian Journal of Plant Physiology24: 693–700).The present study was undertaken to determine if the differencesin physiology can be explained by leaf and canopy morphologyand anatomy. Scanning electron microscopy was used to comparethe leaf anatomy of field-grown upland (‘Delta’and ‘Pine Land 50’) and Pima (‘S6’)cotton. Compared to G. hirsutum, mature leaves of G. barbadenseare larger and thinner, with a thinner palisade layer. G. barbadenseleaves show significant cupping or curling which allows fora more even absorption of insolation over the course of theday and much more light penetration into the canopy. AlthoughG. barbadense leaves have a 70–78% higher stomatal densityon both the abaxial and the adaxial surfaces, its stomates areonly one third the size of those of G. hirsutum. This resultsin G. barbadense having only about 60% of the stomatal surfacearea per leaf surface area compared to G. hirsutum. These resultsare indicative of the anatomical and physiological differencesthat may limit the yield potential of G. barbadense in certaingrowing environments. Copyright 2000 Annals of Botany Company Cotton, leaf anatomy, leaf development, photosynthesis, Gossypium hirsutum, Gossypium barbadense, stomatal density     

Development and Evaluation of Intron and Insertion–Deletion Markers for Gossypium barbadense

A total of 588 Gossypium barbadense coding sequences (CDSs) from nucleotide databases were selected for marker development. After selection, 125 CDSs were used to design 126 markers, including 39 intron polymorphisms (GbIPs) and 87 insertion?Cdeletion polymorphisms (GbIDPs). These markers were evaluated by analyzing the genetic diversity of 66 tetraploid cotton accessions including 56 G. barbadense accessions and 10 Gossypium hirsutum accessions. The amplification efficiencies of the GbIPs and GbIDPs were 0.560 and 0.489 for polymorphism information content, 0.744 and 0.690 for effective multiplex ratio (E), 0.653 and 0.438 for qualitative of nature of data, and 0.272 and 0.148 for effective marker index. Principal coordinate analysis showed profound differences between G. hirsutum and G. barbadense accessions. In addition, most of the G. barbadense accessions of Xinjiang, China were clearly different from foreign and other Chinese G. barbadense accessions. The 126 markers were also evaluated for their ability to enrich genetic maps, and 16 polymorphic loci were mapped on nine chromosomes with six loci on A subgenome and 10 loci on D subgenome. The mapping efficiencies of GbIPs and GbIDPs primers were 15.38% and 11.49%, respectively. This study well proves that GbIPs and GbIDPs can be successfully applied to the analysis of genetic diversity and construction of genetic maps.