In vitro antiseptic properties of an ammonium compound combined with denture base acrylic resin

Background: Denture base acrylic resin is easily colonised by oral endogenous bacteria and Candida spp., and eventually by extra‐oral species such as Staphylococcus spp., Pseudomonadaceae or members of Enterobacteriaceae. This microbial reservoir can be responsive for denture related stomatitis and aspiration pneumonia, a life‐threatening infection especially in geriatric patients. However, the oral and denture hygiene of dependant elderly individuals is extremely poor. Objective: This in vitro study aimed to determine the per cent of a quaternary ammonium compound heat‐polymerised in acrylic resin necessary to obtain denture base displaying antiseptic properties. Design: Acrylic resin discs containing 2–50% ammonium polymer (Poly 202063A; 0% control) were soaked in artificial saliva for 4 weeks. Resin discs were incubated for 24 hours with Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa [37°C, brain–heart infusion (BHI) broth and phosphate‐buffered saline (PBS) buffer] and Candida albicans (30°C, Schaedler broth), in 15 ml (168 discs) and 600 μl (168 discs) of inoculum. Microbial growth was verified at t 0 hours and t 24 hours. Data were recorded as the mean of three colony forming unit (CFU) numerations. The borderline of antimicrobial effect was determined at 0.1% viable cells. Results: In 600 μl of PBS inoculum, resin specimens had a bactericidal effect (E. coli and S. aureus: 2%; P. aeruginosa: 10%) and a fungicidal effect (C. albicans: 50%). Long‐term stability and toxicity in vivo studies are now required. Conclusion: A 2% quaternary ammonium compound polymerised with a denture acrylic resin displayed antiseptic properties after a 4‐week soaking period in artificial saliva. Such antiseptic denture base could help geriatric patients to improve their oral health.     

Effect of the addition of silanated silica on the mechanical properties of microwave heat-cured acrylic resin

doi: 10.1111/j.1741‐2358.2011.00604.x
Effect of the addition of silanated silica on the mechanical properties of microwave heat‐cured acrylic resin Objectives: The purpose of this study was to evaluate fthe flexural strength and Vickers hardness of a microwave energy heat‐cured acrylic resin by adding different concentrations of silane surface‐treated nanoparticle silica. Methods: Acrylic resin specimens with dimensions of 65 × 10 × 2.5 mm were formed and divided into five experimental groups (n = 10) according to the silica concentration added to the acrylic resin mass (weight %) prior to polymerisation : G1, without silica; G2, 0.1% silica; G3, 0.5% silica; G4, 1.0% silica; and G5, 5.0% silica. The specimens were submitted to a three‐point flexural strength test and to the Vickers hardness test (HVN). The data obtained were statistically analysed by anova and the Tukey test (α = 0.05). Results: Regarding flexural strength, G5 differed from the other experimental groups (G1, G2, G3 and G4) presenting the lowest mean, while G4 presented a significantly higher mean, with the exception of group G3. Regarding Vickers hardness, a decrease in values was observed, in which G1 presented the highest hardness compared with the other experimental groups. Conclusion: Incorporating surface‐treated silica resulted in direct benefits in the flexural strength of the acrylic resin activated by microwave energy; however, similar results were not achieved for hardness.     

Effect of pre-processing methods on bond strength between acrylic resin teeth and acrylic denture base resin

doi: 10.1111/j.1741‐2358.2011.00480.x
Effect of pre‐processing methods on bond strength between acrylic resin teeth and acrylic denture base resin Objectives: This study evaluated the effects of various pre‐processing methods on the bond strength between resin and denture teeth. Backgrounds: Debonding of acrylic resin teeth from denture base material is a problem for patients wearing complete dentures. Materials and Methods: Four experimental groups (n = 30) were investigated by subjecting tooth–resin bonding to tensile loading. Specimens were prepared and tested according to the methods of the International Standards Organization (ISO 22112:2005) using a special assembly. Four pre‐processing surface treatments of teeth were applied: (i) ST₁, no treatment applied (control); (ii) ST₂, wax solvent (Dewaks, Faber Kimya & Ilaç, Turkey); (iii) ST₃, boiling water followed by conditioning with methyl methacrylate (MMA) monomer (Meliodent, Bayer Dental, Germany); (iv) ST₄, boiling water followed by wax solvent agent and finally MMA monomer application. Bond strength test was performed using a universal testing machine. Results: All the strength values of the test groups were within clinically acceptable limits. The lowest values were from the ST₁ group and the highest values were in the ST₄ group. Conclusions: Wax elimination methods affected bonding strength. Application of wax solvent and MMA monomer to the ridge lap surfaces of the teeth gave the best results. In clinical practice, this application procedure may decrease the bonding failure of denture teeth.     

Evaluation of the efficacy of chemical disinfectants for disinfection of heat‐polymerised acrylic resin

doi: 10.1111/j.1741‐2358.2010.00400.x
Evaluation of the efficacy of chemical disinfectants for disinfection of heat‐polymerised acrylic resin Objective: This study evaluated the efficacy of disinfectants on the internal aspect of heat‐polymerised acrylic resin contaminated with microbial strains. Background: Dentures absorb oral fluids and become contaminated by different microorganisms. Methods: Two hundred and fifty rectangular specimens were made of heat‐polymerised acrylic resin, and then divided into five groups corresponding to the microbial strains (Staphylococcus aureus, Pseudomonas aeruginosa, Candida albicans, S. mutans and Enterococcus faecalis). After contamination, the specimens were immersed in 1 and 2% sodium hypochlorite and 2% glutaraldehyde for periods of 5, 10 and 15 min. The specimens were placed into tubes containing different broths and incubated at 35°C and then visually analysed. Turbidity in the medium indicated microbial growth. The Fisher’s exact test was used in the analysis of the results. Results: The strain E. faecalis was the most resistant to the disinfectant solutions, and among them, glutaraldehyde was more effective than 2 and 1% hypochlorite for disinfection for 5 min; in the 10‐min period there were no differences between the disinfectants. In 15 min of immersion, 1% hypochlorite and glutaraldehyde were more effective than 2% hypochlorite. Conclusions: Disinfection for 10 min with 1% hypochlorite and glutaraldehyde is effective in disinfecting the internal aspect of heat‐polymerised acrylic resin.     

Effect of the physical properties of acrylic resin of overnight immersion in sodium hypochlorite solution

doi:10.1111/j.1741‐2358.2009.00336.x
Effect of the physical properties of acrylic resin of overnight immersion in sodium hypochlorite solution Objectives: This study evaluated colour stability, surface roughness and flexural strength of microwave‐polymerised acrylic resin after overnight immersion in sodium hypochlorite, simulating 180 days use. Materials and methods: Forty disc‐shaped (15 mm × 4 mm) and 40 rectangular specimens (65 mm × 10 mm × 3 mm) were prepared from microwave‐polymerised acrylic resin. The specimens were immersed in 0.5, 1% sodium hypochlorite, Clorox/Calgon and distilled water. Colour measurements (ΔE) were determined by a portable colorimeter. A surface analyser was used to measure roughness (μm). The flexural strength (MPa) was measured using a three‐point bending test in a universal testing machine. Data were evaluated by one‐way anova , followed by Student–Newman–Keuls test (α = 0.05). Results: Statistical analysis found significantly higher colour changes (SNK, p < 0.001) for the 1% sodium hypochlorite, but mean ΔE value quantified by National Bureau of Standards was classified as slight. When comparing the surface roughness, no statistical significance was found among the solutions (anova , p = 0.637). The 1% sodium hypochlorite presented significantly lower flexural strength compared with the control group (SNK, p = 0.034). Conclusion: It was concluded that immersion in 1% sodium hypochlorite solutions for 8 h does influence the colour stability and flexural strength of microwave‐polymerised acrylic resin, during the simulated period of 180 days.     

Fatigue resistance of acrylic resin denture base material reinforced with E-glass fibres

doi: 10.1111/j.1741‐2358.2011.00548.x
Fatigue resistance of acrylic resin denture base material reinforced with E‐glass fibres Objective: The purpose of the study was to determine the effect of different forms and concentrations (2.5, 3, 4, 5% by volume) of glass fibres (chopped strand mat, continuous and woven) on fatigue resistance of acrylic denture base resin. Material and Methods: The fatigue resistance was measured by applying repeated three‐point bending deflection to the specimens, the cycle frequency of 1.05 g and magnitude of deflection of 2.0 mm. The number of loading cycles needed to cause a fracture in the test specimen was considered the fatigue resistance of the specimen. Results: The results of this study revealed that the addition of three different glass fibre forms at all concentrations to acrylic resin did not produce a statistically significant increase in the fatigue resistance (p ≥ 0.05). This study also revealed that there were significant differences (p < 0.05) between glass fibres forms used concerning the effects on the fatigue resistance. Conclusion: This study showed that the woven glass fibres had a definite superiority over the chopped fibres and the continuous fibres in regard to the fatigue resistance of the acrylic denture base resin.     

The effect of long‐term disinfection procedures on hardness property of resin denture teeth

doi: 10.1111/j.1741‐2358.2011.00520.x The effect of long‐term disinfection procedures on hardness property of resin denture teeth Objective: The aim of the study was to evaluate the effect of long‐term disinfection procedures on the Vickers hardness (VHN) of acrylic resin denture teeth. Material and methods: Five acrylic resin denture teeth (Vipi Dent Plus‐V, Trilux–T, Biolux‐B, Postaris‐P and Artiplus‐A) and one composite resin denture teeth (SR‐Orthosit‐O) were embedded in heat‐polymerised acrylic resin within polyvinylchloride tubes. Specimens were stored in distilled water at 37°C for 48 h. Measurements of hardness were taken after the following disinfection procedures: immersion for 7 days in 4% chlorhexidine gluconate or in 1% sodium hypochlorite (CIm and HIm group, respectively) and seven daily cycles of microwave sterilisation at 650 W for 6 min (MwS group). In the WIm group, specimens were maintained in water during the time used to perform the disinfection procedures (7 days). Data were analysed with anova followed by the Bonferroni procedure (α = 0.01). Results: Microwave disinfection decreased the hardness of all acrylic resin denture teeth (p < 0.001). Immersion for 7 days in 4% chlorhexidine gluconate or distilled water had significant effect on the hardness of the acrylic resin denture teeth A (p < 0.01), and 1% sodium hypochlorite on teeth T (p < 0.01). All disinfection procedures decrease the hardness of the composite resin denture teeth (p < 0.01). Teeth O exhibited the highest and teeth V the lowest hardness values in the control group (p < 0.01). Conclusions: Disinfection procedures changed the hardness of resin denture teeth.     

Effect of flask closure method and post‐pressing time on the upper denture base adaptation

doi:10.1111/j.1741‐2358.2009.00307.x
Effect of flask closure method and post‐pressing time on the upper denture base adaptation Objectives: The purpose of this study was to evaluate the effect of flask‐closure methods, post‐pressing times and acrylic resins on denture base adaptation. Materials and methods: The resins were flasked using a hydraulic press and closed with the traditional clamp or RS system. Conventional heat‐cure resin was polymerised immediately or at 6 h post‐pressing at 74°C for 9 h. Rapid cycle heat‐cure resin was polymerised in boiling water for 20 min. After cooling, the bases were deflasked and the sets of cast‐base transversally sectioned in the regions distal to the canine, mesial to the first molar and in the posterior palatal zone. The adaptation was measured with an optical microscope (0.0005 mm) at five reference points for each section. Data were analysed using anova and Tukey’s test (α = 0.05). Results: Traditional clamp and immediate post‐pressing time improved base adaptation for conventional heat‐cure resin. Both post‐pressing times showed most accurate base adaptation for conventional heat‐cure resin when the traditional clamp was used. Immediate post‐pressing time improved base adaptation for conventional heat‐cure resin and the 6‐h delay in time was significant for the rapid cycle heat‐cure resin. Conclusions: Traditional clamp and immediate post‐pressing time improved base adaptation for conventional heat‐cure resin.     

Flexural and bond strengths of relined denture polymers assessed by four‐point bending tests and Weibull analysis

doi: 10.1111/j.1741‐2358.2011.00515.x Flexural and bond strengths of relined denture polymers assessed by four‐point bending tests and Weibull analysis Objectives: The aim of this study was to (1) investigate the flexural strengths of three denture resins i.e. heat, photopolymerised and microwaved and how it was affected by relining with auto‐ and visible light–polymerised hard reliners, (2) investigate the bond strengths between denture resins and hard reliners and (3) interpret the results of both tests by utilising Weibull analysis. Materials and methods: Specimens (65 × 10 × 2.5 mm) from denture resins, relined and bonded combinations were tested using a four‐point bending test in a universal testing machine and a crosshead speed of 5 mm/min. Ten specimens for each bulk resin and denture resin–reliner combination for a total of 150 were tested. Results: Statistical analysis indicated significant differences between bulk materials (p < 0.001) and between reliners (p < 0.001) for flexural and bond strength tests. Conclusion: It was concluded that (1) the four‐point flexural strength was different between the denture base materials, (2) flexure strength between bulk and relined or between relined with autopolymerised and photopolymerised bases was different, (3) flexural strength among relined denture bases was different and (4) bond strengths among relined denture bases were different.     

Antimicrobial and mechanical properties of acrylic resins with incorporated silver-zinc zeolite - part I

Objective: The purpose of this in vitro study was to evaluate the antimicrobial activity of acrylic resins containing different percentages of silver and zinc zeolite, and to assess whether the addition of zeolite alters the flexural and impact strength of the resins. Background: The characteristics of acrylic resins support microorganism development that can threaten the health of the dentures user. Material and methods: A microwave‐polymerised (Onda‐Cryl) and two heat‐polymerised (QC20 and Lucitone 550) acrylic resins were used. The materials were handled according to the manufacturers’ instructions. Fifty rectangular‐shaped specimens (8 × 10 × 4mm) were fabricated from each resin and assigned to 5 groups (n = 10) according to their percentage of Irgaguard B5000 silver–zinc zeolite (0%– control, 2.5%, 5.0%, 7.5% and 10%). Flexural strength and Izod impact strength were evaluated. The antimicrobial activity against two strains of Candida albicans and two strains of Streptococcus mutans was assessed by agar diffusion method. Data were analysed statistically by one‐way anova and Tukey’s test at 5% significance level. Results: The addition of 2.5% of Irgaguard B5000 to the materials resulted in antimicrobial activity against all strains. Flexural strength decreased significantly with the addition of 2.5% (QC20 and Lucitone 550) and 5.0% (Onda‐Cryl) of Irgaguard B5000. The impact strength decreased significantly with the addition of 2.5% (Lucitone 550) and 5.0% (QC20 and Onda‐Cryl) of zeolite. Conclusion: The addition of silver–zinc zeolite to acrylic resins yields antimicrobial activity, but may affect negatively the mechanical properties, depending on the percentage of zeolite.     

Assessment of changes in oral health‐related quality of life among patients with complete denture before and 1 month post‐insertion using Geriatric Oral Health Assessment Index

doi:10.1111/j.1741‐2358.2009.00323.x
Assessment of changes in oral health‐related quality of life among patients with complete denture before and 1 month post‐insertion using Geriatric Oral Health Assessment Index Objective: Geriatric Oral Health Assessment Index (GOHAI) is a 12‐item measure of “patient‐reported oral functional problems” intended for use in the assessment of the effectiveness of dental treatment. Design and Setting: As there is scanty literature available on GOHAI in the Indian population, the present study was undertaken to assess the changes in GOHAI before and 1 month after placement of dentures in completely edentulous patients reporting to a dental hospital at Indore, India. Measurements: The GOHAI questionnaire was completed by the examiner who interviewed the patients (n = 35) before placement of complete dentures and 1 month later. Mean, median values were calculated and the data were analysed using Wilcoxon signed‐rank test. Results: When overall mean was considered, the GOHAI scores increased from 27.48 to 30.19 (p = 0.002; highly significant). Conclusion: Patients reported improvement in functional changes after placement of complete dentures.     

Use of resin‐bonded extracoronal attachments with removable partial denture: case report

doi:10.1111/j.1741‐2358.2009.00298.x
Use of resin‐bonded extracoronal attachments with removable partial denture: case report Introduction: Resin‐bonded extracoronal attachments may be indicated for the abutment teeth of removable partial dentures, especially for anterior teeth when a cingulum rest must be provided. This type of treatment has a series of advantages such as minimal tooth reduction, supragingival margins, favourable stress distribution, and improved aesthetic appearance. Objective: To report a clinical case of oral rehabilitation using a combination of resin‐bonded extracoronal attachments joined by a Dolder bar with a removable partial denture. Case report: A 60‐year‐old male patient with only the canines in the maxillary arch was restored with a combination of resin‐bonded extracoronal attachments joined by a Dolder bar and a removable partial denture. Conclusion: Dentures with resin‐bonded extracoronal attachments can have a number of advantages over traditional clasp‐retained removable partial dentures.     

Glass transition temperature of hard chairside reline materials after post‐polymerisation treatments

doi:10.1111/j.1741‐2358.2009.00312.x
Glass transition temperature of hard chairside reline materials after post‐polymerisation treatments Objective: This study evaluated the effect of post‐polymerisation treatments on the glass transition temperature (T_g) of five hard chairside reline materials (Duraliner II‐D, Kooliner‐K, New Truliner‐N, Ufi Gel hard‐U and Tokuso Rebase Fast‐T). Materials and methods: Specimens (10 × 10 × 1 mm) were made following the manufacturers’ instructions and divided into three groups (n = 5). Control group specimens were left untreated. Specimens from the microwave group were irradiated with pre‐determined power/time combinations, and specimens from the water‐bath group were immersed in hot water at 55°C for 10 min. Glass transition (°C) was performed by differential scanning calorimetry. Data were analysed using anova, followed by post hoc Tukey’s test (α = 0.05). Results: Both post‐polymerisation treatments promoted a significant (p < 0.05) increase in the T_g of reline material K. Materials K, D and N showed the lowest T_g (p < 0.05). No significant difference between T and U specimens was observed. Conclusion: Post‐polymerisation treatments improved the glass transition of material Kooliner, with the effect being more pronounced for microwave irradiation.     

Luminescent properties of Ca3SiO4Cl2 co‐doped with Ce3+ and Eu2+ for near‐ultraviolet light‐emitting diodes

Ca₃SiO₄Cl₂ co‐doped with Ce³⁺,Eu²⁺ was prepared by high temperature reaction. The structure, luminescent properties and the energy transfer process of Ca₃SiO₄Cl₂: Ce³⁺,Eu²⁺ were investigated. Eu²⁺ ions can give enhanced green emission through Ce³⁺ → Eu²⁺ energy transfer in these phosphors. The green phosphor Ca_2.9775SiO₄Cl₂:0.0045Ce³⁺,0.018Eu²⁺ showed intense green emission with broader excitation in the near‐ultraviolet light range. A green light‐emitting diode (LED) based on this phosphor was made, and bright green light from this green LED could be observed by the naked eye under 20 mA current excitation. Hence it is considered to be a good candidate for the green component of a three‐band white LED. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of Large Surface‐Area g‐C3N4 Comodified with MnOx and Au‐TiO2 as Efficient Visible‐Light Photocatalysts for Fuel Production

Herein, this study successfully fabricates porous g‐C₃N₄‐based nanocomposites by decorating sheet‐like nanostructured MnO_x and subsequently coupling Au‐modified nanocrystalline TiO₂. It is clearly demonstrated that the as‐prepared amount‐optimized nanocomposite exhibits exceptional visible‐light photocatalytic activities for CO₂ conversion to CH₄ and for H₂ evolution, respectively by ≈28‐time (140 µmol g^?1 h^?1) and ≈31‐time (313 µmol g^?1 h^?1) enhancement compared to the widely accepted outstanding g‐C₃N₄ prepared with urea as the raw material, along with the calculated quantum efficiencies of ≈4.92% and 2.78% at 420 nm wavelength. It is confirmed mainly based on the steady‐state surface photovoltage spectra, transient‐state surface photovoltage responses, fluorescence spectra related to the produced ?OH amount, and electrochemical reduction curves that the exceptional photoactivities are comprehensively attributed to the large surface area (85.5 m² g^?1) due to the porous structure, to the greatly enhanced charge separation and to the introduced catalytic functions to the carrier‐related redox reactions by decorating MnO_x and coupling Au‐TiO₂, respectively, to modulate holes and electrons. Moreover, it is suggested mainly based on the photocatalytic experiments of CO₂ reduction with isotope ¹³CO₂ and D₂O that the produced ?CO₂ and ?H as active radicals would be dominant to initiate the conversion of CO₂ to CH₄.     

Development of long‐persistent photoluminescent epoxy resin immobilized with europium (II)‐doped strontium aluminate

A facile approach for possible industrial production of long‐persistent phosphorescence, continuing to emitting light for a long time period, smart cobbles were developed toward photoluminescent hard surfaces. The inorganic strontium aluminium oxide pigment doped with rare earth elements was added to a synthetic organic epoxy in the presence of polyamine as a hardener to make a phosphor‐loaded viscous fluid that can then be hardened in a few minutes. The transparency of the solid cobbles can be accomplished easily using homogeneous dispersion of the phosphor in the epoxy resin fluid before the addition of a hardener to avoid pigment aggregation. This pigment–epoxy formula can be easily applied industrially onto flagstones surfaces under ambient conditions. The photoluminescent cobblestones demonstrated an optimum excitation wavelength at 366 nm and an emission band at 521 nm with a long‐persistent phosphorescence cobble surface. The development of a translucent white colour under normal daylight, bright green under ultraviolet (UV) irradiation, bright white colour after 30 sec in the dark, and phosphorescent green colour after 75 min in the dark was indicated using Commission Internationale de l’Eclairage (CIE) Laboratory coloration measurements. The luminescent hard composite cobble exhibited a highly durable and reversible long‐persistent phosphorescence light. Photoluminescence, morphological, and hardness properties as well as the elemental composition of the prepared cobbles were explored.     

Impact of UV‐Visible Light on the Morphological and Photochemical Behavior of a Low‐Bandgap Poly(2,7‐Carbazole) Derivative for Use in High‐Performance Solar Cells

This paper reports on the photochemical behavior upon exposure to UV‐visible light of a poly(2,7‐carbazole) derivative for use in high‐performance solar cells. Poly[N‐9′‐hepta‐decanyl‐2,7‐carbazole‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole)] (PCDTBT) is one of a relatively large class of push‐pull carbazole‐based copolymers that have been synthesized to better harvest the solar spectrum. The 2,7‐carbazole building block of PCDTBT is also used with different electron‐accepting units in a large variety of low‐band‐gap polymers. The photochemical and morphological behavior of PCDTBT thin films is investigated from the molecular scale to the nanomechanical properties. The photo‐oxidation mechanism is shown to be governed by chain‐scission and cross‐linking reactions. It results in dramatic evolution of the morphology, roughness and stiffness of thin PCDTBT films. Based on the identification of several photoproducts formed along the macromolecular chains or released into the gas phase, the main pathways of PCDTBT photochemical evolution are discussed. These processes first involve the scission of the C–N bond between the carbazole group and the tertiary carbon atom bearing the alkyl side‐chain. Modifications of the chemical structure of PCDTBT, the evolution of its UV‐visible absorbance, and its nanomechanical properties initiated by light irradiation are shown to be closely related.