Biotin binding changes the conformation and decreases tryptophan accessibility of streptavidin

Biotin binding reduces the tryptophan fluorescence emissions of streptavidin by 39%, blue shifts the emission peak from 333 to 329 nm, and reduces the bandwidth at half height from 53 to 46 nm. The biotin-induced emission difference spectrum resembles that of a moderately polar tryptophan. Streptavidin fluorescence can be described by two lifetime classes: 2.6 nsec (34%) and 1.3 nsec (66%). With biotin bound, lifetimes are 1.3 nsec (26%) and 0.8 nsec (74%). Biotin binding reduces the average fluorescence lifetime from 1.54 to 0.88 nsec. Biotin does not quench the fluorescence of indoles. The fluorescence changes are consistent with biotin binding causing a conformational change which moves tryptophans into proximity to portions of streptavidin which reduce the quantum yield and lifetimes. Fluorescence quenching by acrylamide revealed two classes of fluorophores. Analysis indicated a shielded component comprising 20–28% of the initial fluorescence with (K_SV+V)0.55 M^–1. The more accessible component has a predominance of static quenching. Measurements of fluorescence lifetimes at different acrylamide concentrations confirmed the strong static quenching. Since static quenching could be due to acrylamide binding to streptavidin, a dye displacement assay for acrylamide binding was constructed. Acrylamide does bind to streptavidin (Ka=5 M^–1), and probably binds within the biotin-binding site. In the absence of biotin, none of streptavidin's fluorescence is particularly accessible to iodide. In the presence of biotin, iodide neither quenches fluorescence nor alters emission spectra, and acrylamide access is dramatically reduced. We propose that the three tryptophans which always line the biotin site are sufficiently close to the surface of the binding site to be quenched by bound acrylamide. These tryptophans are shielded from iodide, most probably due to steric or ionic hindrances against diffusion into the binding site. Most of the shielding conferred by biotin binding can be attributed to the direct shielding of these residues and of a fourth tryptophan which moves into the binding site when biotin binds, as shown by X-ray studies (Weberet al., 1989).     

In vitro targeting of avidin-expressing glioma cells with biotinylated persistent luminescence nanoparticles

Far red emitting persistent luminescence nanoparticles (PLNP) were synthesized and functionalized with biotin to study their targeting ability toward biotin-binding proteins. First, the interaction of biotin-decorated PLNP with streptavidin, immobilized on a plate, was shown to be highly dependent on the presence of a PEG spacer between the surface of the nanoparticles and the biotin ligand. Second, interaction between biotin-PEG-PLNP and free neutravidin in solution was confirmed by fluorescence microscopy. Finally, in vitro binding study on BT4C cells expressing lodavin fusion protein, bearing the extracellular avidin moiety, showed that such biotin-covered PLNP could successfully be targeted to malignant glioma cells through a specific biotin-avidin interaction. The influence of nanoparticle core diameter, incubation time, and PLNP concentration on the efficiency of targeting is discussed.     

Constrained cell recognition peptides engineered into streptavidin.

Streptavidin is widely used as an adaptor molecule in diagnostics, separations, and laboratory assay applications. We have here engineered cell adhesive peptides into the three-dimensional scaffolding of streptavidin to convert streptavidin into a functional protein. The mutations did not alter refolding or tetramer assembly and the slow biotin dissociation rate of wild-type streptavidin was retained. The peptide targets were hexapeptide sequences derived from osteopontin and fibronectin that contain the RGD cell adhesion sequence. Cell binding assays directly demonstrated that rat aortic endothelial cells and human melanoma cells adhered to surfaces coated with either of the two RGD streptavidin mutants in a dose-dependent fashion. Wild-type streptavidin displayed no significant cell binding activity. Inhibition studies with soluble RGD peptides confirmed that the cell adhesion was RGD mediated. Further inhibition studies with antibodies directed against alphavbeta3 demonstrated that the RGD-streptavidin interaction was primarily mediated by this integrin with melanoma cells. These results demonstrate that peptide recognition sequences can be engineered into accessible surface regions of streptavidin without disrupting biotin binding properties. This approach to introducing secondary functional activities into streptavidin may improve streptavidin's utility in existing applications or provide new technology opportunities.     

Recognition processes at a functionalized lipid surface observed with molecular resolution.

The specific binding of proteins to functionalized lipid monolayers on aqueous subphases was characterized by neutron reflectivity and fluorescence microscopy measurements. Due to the high affinity and high specificity of their noncovalent interaction, streptavidin (SA) and biotin (vitamin H) were chosen as a model system to investigate the structural characteristics of a recognition process on a molecular length scale. Changes in the neutron reflection from the surfaces of NaCl aqueous (H2O or D2O) protein solutions (10(-8) M SA) were used to monitor the interaction of the protein with a monolayer of a biotinylated lipid in situ. Refinement of the reflectivity data and independent fluorescence microscopic observation of the interface using FITC-labeled SA showed that the protein forms macroscopically homogeneous (and presumably crystalline) domains covering a large portion of the surface. Moreover, the neutron reflection experiments clearly showed the formation of a monomolecular protein layer with an effective thickness, dp = 43.7 +/- 2 A. The area per protein molecule occupied in the film was A0 = 2860 +/- 200 A2 and nw = 260 +/- 100 water molecules were associated with each protein molecule. Quantitative binding was found to occur at biotin surface concentrations as low as 1 molecule/1,250 A2 (compared with approximately 1 molecule/40 A2 for dense packing). This study demonstrates the application of a promising new tool for the systematic investigation of molecular recognition processes in protein/lipid model systems.     

Biotinylated granulocyte/macrophage colony-stimulating factor analogues: effect of linkage chemistry on activity and binding.

Biotinylated granulocyte/macrophage colony-stimulating factor (GM-CSF) analogues with different linkage chemistries and levels of conjugated biotin were synthesized by reacting recombinant human GM-CSF with sulfosuccinimidyl 6-biotinamidohexanoate or biotin hydrazide/1-[3-(dimethylamino)-propyl]-3-ethylcarbodiimide. These chemically reactive forms of biotin produced derivatives biotinylated at amine or carboxyl groups, respectively. Amine-derivatized analogues of 1.2 and 3.8 mol of biotin/mol of protein (N1-bGM-CSF and N4-bGM-CSF) and a carboxyl-modified analogue of 4.6 mol of biotin/mol of protein (C5-bGM-CSF) were synthesized. These analogues were compared to determine the effect of biotinylation on biological activity and GM-CSF receptor binding characteristics. The biotinylated proteins migrated with the same molecular weight as the native, unmodified protein as determined by SDS-PAGE and could be detected by Western blotting with alkaline phosphatase conjugated streptavidin, thus demonstrating the biotin linkage. All three analogues retained full agonist activity relative to the native protein (EC50 = 10-15 pM) when assayed for the stimulation of human bone marrow progenitor cell growth. Cell surface GM-CSF receptor binding was characterized by the binding of the analogues to human neutrophils, with detection by fluorescein-conjugated avidin and fluorescence-activated cell sorting. The N-bGM-CSFs demonstrated GM-CSF receptor specific binding that was displaceable by excess underivatized protein, with the detected fluorescence signal decreasing with increasing biotin to protein molar ratio. In contrast, C5-bGM-CSF binding above background fluorescence could not be detected using this system, suggesting that this derivative could bind to and activate the receptor, but not simultaneously bind fluorescein-conjugated avidin. The amine-derivatized biotinylated GM-CSF analogues retained biological activity, could specifically label cell surface receptors, and may be useful nonradioactive probes with which to study GM-CSF receptor cytochemistry and receptor modulation by flow cytometry.     

Protein engineering of streptavidin for in vivo assembly of streptavidin beads

Escherichia coli was engineered to intracellularly manufacture streptavidin beads. Variants of streptavidin (monomeric, core and mature full length streptavidin) were C-terminally fused to PhaC, the polyester granule forming enzyme of Cupriavidus necator. All streptavidin fusion proteins mediated formation of the respective granules in E. coli and were overproduced at the granule surface. The monomeric streptavidin showed biotin binding (0.7 ng biotin/microg bead protein) only when fused as single-chain dimer. Core streptavidin and the corresponding single-chain dimer mediated a biotin binding of about 3.9 and 1.5 ng biotin/mug bead protein, respectively. However, biotin binding of about 61 ng biotin/mug bead protein with an equilibrium dissociation constant (KD) of about 4 x 10(-8)M was obtained when mature full length streptavidin was used. Beads displaying mature full length streptavidin were characterized in detail using ELISA, competitive ELISA and FACS. Immobilisation of biotinylated enzymes or antibodies to the beads as well as the purification of biotinylated DNA was used to demonstrate the applicability of these novel streptavidin beads. This study proposes a novel method for the cheap and efficient one-step production of versatile streptavidin beads by using engineered E. coli as cell factory.     

A self-assembled quantum dot probe for detecting beta-lactamase activity

This communication describes a quantum dot probe that can be activated by a reporter enzyme, beta-lactamase. Our design is based on the principle of fluorescence resonance energy transfer (FRET). A biotinylated beta-lactamase substrate was labeled with a carbocyanine dye, Cy5, and immobilized on the surface of quantum dots through the binding of biotin to streptavidin pre-coated on the quantum dots. In assembling this nanoprobe, we have found that both the distance between substrates and the quantum dot surface, and the density of substrates are important for its function. The fluorescence emission from quantum dots can be efficiently quenched (up to 95%) by Cy5 due to FRET. Our final quantum dot probe, assembled with QD605 and 1:1 mixture of biotin and a Cy5-labeled lactam, can be activated by 32microg/mL of beta-lactamase with 4-fold increase in the fluorescence emission.     

Binding of streptavidin with biotinylated thermosensitive nanospheres based on poly(N,N-diethylacrylamide-co-2-hydroxyethyl methacrylate)

Thermosensitive polymer nanospheres based on N,N-diethylacrylamide and 2-hydroxyethyl methacrylate (HEMA) have been prepared, characterized, and conjugated with biotin. The thermosensitivity of poly(N,N-diethylacrylamide) was enhanced by the incorporation of HEMA up to about 40 mol %. Atomic force microscopic images show that these particles can be closely packed even without the surface charges as in the latex particles. Biotinylation reduces the thermosensitivity of the copolymer nanospheres. The biotinylated hydrogel nanospheres showed a reduction in size upon binding with streptavidin, indicating the formation of a less hydrophilic conjugate. No aggregation of the biotinylated particles due to the cross-linking effect of streptavidin was observed. This size change could be reversed by the addition of free biotin to the system. The interaction is specific, and no such changes were observed when streptavidin was replaced by bovine serum albumin.     

Cooperative biotin binding by streptavidin. Electrophoretic behavior and subunit association of streptavidin in the presence of 6 M urea

We describe the cooperativity in the biotin binding of streptavidin. We have developed an electrophoretic method which can separate streptavidin molecules with bound biotin from those without biotin. In 6 M urea, the electrophoretic mobility of streptavidin in polyacrylamide gels becomes significantly faster upon biotin binding. When streptavidin was titrated with biotin, only two major bands were observed on the gel, consisting of streptavidin molecules without bound biotin and those saturated with biotin. The change in mobility is due partly to the negative charge of the bound biotin, but it must reflect conformational changes of the protein molecule associated with biotin binding. Gel filtration chromatography showed that the streptavidin molecule dissociates into two subunit dimers in the presence of 6 M urea. These results suggest that the biotin binding by the streptavidin subunit dimer is cooperative and that some communication must exist between the two subunits.     

Cell-adhesive properties of streptavidin are mediated by the exposure of an RGD-like RYD site.

The interaction of streptavidin with various cell systems was studied using fluorescent derivatives of the protein. The native unprocessed form of streptavidin bound to cells at low levels and in a nonspecific manner. In contrast, both the truncated "core" streptavidin (the commercially available form) and the biotin-blocked unprocessed protein bound to cells in enhanced levels and in a specific, saturable manner. This suggests that the binding of biotin or cleavage of the terminal portion(s) of the native protein molecule causes conformational changes which lead to the exposure of sites which presumably interact with cell surface receptors. Peptide inhibition studies demonstrated that the majority of binding to cells appears to be dependent on RGD-like specificity, suggesting that the GRYDS sequence of the streptavidin molecule may exhibit such specificity. Indirect immunofluorescence assays revealed that the protein is associated mainly with the cell surface. Moreover, streptavidin was demonstrated to compete with specific monoclonal antibodies to the RGD-binding site on the GpIIbIIIa integrin of activated platelets, thus suggesting that streptavidin may facilitate binding to ubiquitous cell-surface adhesion receptors via RGD mimicry.     

Accurate measurement of avidin and streptavidin in crude biofluids with a new, optimized biotin-fluorescein conjugate

A new biotin-fluorescein conjugate with an ethylene diamine spacer was found to be the first fluorescent biotin derivative which truly mimicked d-biotin in terms of high affinity, fast association, and non-cooperative binding to avidin and streptavidin tetramers. These exceptional properties were attributed to the small size/length of the new ligand since all larger/longer biotin derivatives are known for their mutual steric hindrance and anti-cooperative binding in 4:1 complexes with avidin and streptavidin tetramers. Specific binding of the new biotin-fluorescein conjugate towards avidin and streptavidin was accompanied by 84-88% quenching of ligand fluorescence. In the accompanying study this effect was used for rapid estimation of avidin and streptavidin in a new 'single tube assay'. In the present study the strong quenching effect was utilized to accurately monitor stoichiometric titration of biotin-binding sites in samples with >/=200 pM avidin or streptavidin. The concentration was calculated from the consumption of fluorescent ligand up to the distinct breakpoint in the fluorescence titration profile which was marked by the abrupt appearance of strongly fluorescent ligands which were in excess. Due to this protocol the assay was not perturbed by background fluorescence or coloration in the unknown samples. The new fluorescence titration assay is particularly suited for quick checks on short notice because getting started only means to thaw an aliquot of a standardized stock solution of fluorescent ligand. No calibration is required for the individual assay and the ligand stock solution needs to be restandardized once per week (or once per year) when stored at -25 degrees C (or at -70 degrees C, respectively).     

Stable,high‐affinity streptavidin monomer for protein labeling and monovalent biotin detection

The coupling between the quaternary structure, stability and function of streptavidin makes it difficult to engineer a stable, high affinity monomer for biotechnology applications. For example, the binding pocket of streptavidin tetramer is comprised of residues from multiple subunits, which cannot be replicated in a single domain protein. However, rhizavidin from Rhizobium etli was recently shown to bind biotin with high affinity as a dimer without the hydrophobic tryptophan lid donated by an adjacent subunit. In particular, the binding site of rhizavidin uses residues from a single subunit to interact with bound biotin. We therefore postulated that replacing the binding site residues of streptavidin monomer with corresponding rhizavidin residues would lead to the design of a high affinity monomer useful for biotechnology applications. Here, we report the construction and characterization of a structural monomer, mSA, which combines the streptavidin and rhizavidin sequences to achieve optimized biophysical properties. First, the biotin affinity of mSA (K_d = 2.8 nM) is the highest among nontetrameric streptavidin, allowing sensitive monovalent detection of biotinylated ligands. The monomer also has significantly higher stability (T_m = 59.8°C) and solubility than all other previously engineered monomers to ensure the molecule remains folded and functional during its application. Using fluorescence correlation spectroscopy, we show that mSA binds biotinylated targets as a monomer. We also show that the molecule can be used as a genetic tag to introduce biotin binding capability to a heterologous protein. For example, recombinantly fusing the monomer to a cell surface receptor allows direct labeling and imaging of transfected cells using biotinylated fluorophores. A stable and functional streptavidin monomer, such as mSA, should be a useful reagent for designing novel detection systems based on monovalent biotin interaction. Biotechnol. Bioeng. 2013; 110: 57–67. © 2012 Wiley Periodicals, Inc.     

Investigation of biotin-streptavidin binding interactions using microcantilever sensors

We report the investigation of biotin-streptavidin binding interactions using microcantilever sensors. A symmetric cantilever construction is employed to minimize the effects of thermal drift and the control of surface chemistry on the backside of the cantilever is demonstrated to reduce the effects of non-specific binding interactions on the cantilever. Three structurally different biotin modified cantilever surfaces are used as a model system to study the binding interaction with streptavidin. The cantilever response to the binding of streptavidin on these biotin sensing monolayers is compared. The lowest detection limit of streptavidin using biotin-HPDP is found to be between 1 and 10nM limited by the optical measurement setup. Surface characterization using quartz crystal microbalance (QCM) and high-resolution atomic force microscope (AFM) is used to benchmark the cantilever sensor response. In addition, the QCM and AFM studies reveal that the surface density of bound streptavidin on biotin modified surfaces was low, thereby implying that effects other than steric hindrance are responsible for defining cantilever response.     

Colorimetric competitive inhibition method for the quantification of avidin, streptavidin and biotin.

A colorimetric competitive inhibition assay for avidin, streptavidin and biotin was developed. The method for avidin or streptavidin was based on the competitive binding between avidin or streptavidin and a streptavidin-enzyme conjugate for biotinylated dextrin immobilized on the surface of a microtitre plate. For biotin quantitation the competition is between free biotin and the immobilized biotin for the streptavidin-enzyme conjugate. The limits of detection which was determined as the concentration of competitor required to give 90% of maximal absorbency (100% inhibition) was approximately 20 ng/100 microl per assay for avidin and streptavidin and 0.4 pg/100 microl per assay for biotin. The methods are simple, rapid, highly sensitive and adaptable to high throughput analysis.     

Imaging proteins in live mammalian cells with biotin ligase and monovalent streptavidin

This protocol describes a simple and efficient way to label specific cell surface proteins with biophysical probes on mammalian cells. Cell surface proteins tagged with a 15-amino acid peptide are biotinylated by Escherichia coli biotin ligase (BirA), whereas endogenous proteins are not modified. The biotin group then allows sensitive and stable binding by streptavidin conjugates. This protocol describes the optimal use of BirA and streptavidin for site-specific labeling and also how to produce BirA and monovalent streptavidin. Streptavidin is tetravalent and the cross-linking of biotinylated targets disrupts many of streptavidin's applications. Monovalent streptavidin has only a single functional biotin-binding site, but retains the femtomolar affinity, low off-rate and high thermostability of wild-type streptavidin. Site-specific biotinylation and streptavidin staining take only a few minutes, while expression of BirA takes 4 d and expression of monovalent streptavidin takes 8 d.     

A small-molecule-linked DNA–graphene oxide-based fluorescence-sensing system for detection of biotin

In this paper, we establish a novel fluorescence-sensing system for the detection of biotin based on the interaction between DNA and graphene oxide and on protection of the terminal of the biotinylated single-stranded DNA fluorescent probe by streptavidin. In this system, streptavidin binds to the biotinylated DNA, which protects the DNA from hydrolysis by exonuclease I. The streptavidin–DNA conjugate is then adsorbed to the graphene oxide resulting in the fluorescence being quenched. Upon the addition of free biotin, it competes with the labeled biotin for the binding sites of streptavidin and then the exonuclease I digests the unbound DNA probe from the 3′ to the 5′ terminal, releasing the fluorophore from the DNA. Because of the weak affinity between the fluorophore and graphene oxide, the fluorescence is recovered. Under optimal conditions, the fluorescence intensity is proportional to the concentration of biotin in the concentration range of 0.5–20 nmol/L. The detection limit for biotin is 0.44 nmol/L. The proposed fluorescence-sensing system was applied to the determination of biotin in some real samples with satisfactory reproducibility and accuracy. This work could provide a common platform for detecting small biomolecules based on protein–small molecule ligand binding.     

GFP-SA融合蛋白的表达纯化及其锚定修饰肿瘤细胞的研究

目的　GFP（绿色荧光蛋白）-SA（链亲和素）双功能融合蛋白的制备及其鉴定研究,以展示我们建立的技术平台,即用含链亲和素的双功能融合蛋白对生物素化的细胞表面进行高效的锚定修饰。方法　构建原核表达载体pET24d/GFP-SA转化大肠杆菌BL21(DE3)。用IPTG诱导重组蛋白的表达,用镍金属螯合（Ni-NTA）层析柱进行纯化。用制备的GFP-SA双功能融合蛋白,对B16肿瘤细胞已生物素化的细胞表面进行修饰,经荧光显微镜和流式细胞仪进行修饰效率分析。此外,用MTT法检测细胞表面修饰对肿瘤细胞活力及其生长情况的影响。结果　GFP-SA重组融合蛋白在大肠杆菌实现了高效表达（约占细菌总蛋白的20%）,通过纯化和复性制备的GFP-SA双功能融合蛋白具有双重活性,即：链亲和素介导的、对生物素高效特异的结合活性,和GFP发射绿色荧光的活性,并能高效修饰表面已生物素化的肿瘤细胞。此外,GFP-SA双功能融合蛋白的细胞表面修饰对细胞的活力及其生长无显著影响。结论　GFP-SA融合蛋白能高效修饰表面已生物素化的肿瘤细胞,可用作肿瘤疫苗研究的示踪蛋白及实验对照体系。     

The quaternary structure of streptavidin in urea

We report on the interactions of urea and guanidinium salts with streptavidin. Gel filtration chromatography in 0, 4, 6, and 7 M urea indicates that the streptavidin tetramer remains intact in urea. Biotin alters the electrophoretic mobility of streptavidin whether or not 6 M urea is present. The intrinsic fluorescence of streptavidin is increased and blue-shifted in 6 M urea. The fluorescence changes indicate the absence of unfolding. A conformational response to urea is possible, but much of the fluorescence change is due to urea binding as a weak biotin analog (Ka approximately 1.3 M-1). The resistance to structural perturbation by urea reflects the structural stability of streptavidin's anti-parallel beta-barrel motif. Unfolding is sluggish in 6 M guanidinium hydrochloride (half-time, approximately 50 days). After guanidinium thiocyanate unfolding, streptavidin can be refolded, but the unfolding and refolding transitions are centered at different concentrations of perturbant. Slow unfolding, with a 15th power dependence on guanidinium thiocyanate concentration, may be partially responsible for the noncoincidence of the unfolding and refolding processes. Nonequilibrium behavior is also seen in 6 M urea, as native streptavidin does not unfold and guanidinium thiocyanate unfolded streptavidin does not refold. Refolding does occur at lower concentrations of urea. Guanidinium thiocyanate only slowly unfolds the biotin-streptavidin complex. In the presence of biotin, unfolded streptavidin does not refold in 6 M guanidinium thiocyanate or in 6 M urea.     

Novel biosensor system model based on fluorescence quenching by a fluorescent streptavidin and carbazole‐labeled biotin

In the present study, a novel molecular biosensor system model was designed by using a couple of the fluorescent unnatural mutant streptavidin and the carbazole‐labeled biotin. BODIPY‐FL‐aminophenylalanine (BFLAF), a fluorescent unnatural amino acid was position‐specifically incorporated into Trp120 position of streptavidin by four‐base codon method. On the other hand, carbazole‐labeled biotin was synthesized as a quencher for the fluorescent Trp120BFLAF mutant streptavidin. The fluorescence of fluorescent Trp120BFLAF mutant streptavidin was decreased as we expected when carbazole‐labeled biotin was added into the mutant streptavidin solution. Furthermore, the fluorescence decrease of Trp120BFLAF mutant streptavidin with carbazole‐labeled biotin (100 nM) was recovered by the competitive addition of natural biotin. This result demonstrated that by measuring the fluorescence quenching and recovery, a couple of the fluorescent Trp120BFLAF mutant streptavidin and the carbazole‐labeled biotin were successfully applicable for quantification of free biotin as a molecular biosensor system. Copyright © 2016 John Wiley & Sons, Ltd.     

Engineering soluble monomeric streptavidin with reversible biotin binding capability

Monomeric streptavidin with reversible biotin binding capability has many potential applications. Because a complete biotin binding site in each streptavidin subunit requires the contribution of tryptophan 120 from a neighboring subunit, monomerization of the natural tetrameric streptavidin can generate streptavidin with reduced biotin binding affinity. Three residues, valine 55, threonine 76, and valine 125, were changed to either arginine or threonine to create electrostatic repulsion and steric hindrance at the interfaces. The double mutation (T76R,V125R) was highly effective to monomerize streptavidin. Because interfacial hydrophobic residues are exposed to solvent once tetrameric streptavidin is converted to the monomeric state, a quadruple mutein (T76R,V125R,V55T,L109T) was developed. The first two mutations are for monomerization, whereas the last two mutations aim to improve hydrophilicity at the interface to minimize aggregation. Monomerization was confirmed by four different approaches including gel filtration, dynamic light scattering, sensitivity to proteinase K, and chemical cross-linking. The quadruple mutein remained in the monomeric state at a concentration greater than 2 mg/ml. Its kinetic parameters for interaction with biotin suggest excellent reversible biotin binding capability, which enables the mutein to be easily purified on the biotin-agarose matrix. Another mutein (D61A,W120K) was developed based on two mutations that have been shown to be effective in monomerizing avidin. This streptavidin mutein was oligomeric in nature. This illustrates the importance in selecting the appropriate residues and approaches for effective monomerization of streptavidin.