Development of an immobilized cell reactor for the production of 1,3-propanediol by Citrobacter freundii

Citrobacter freundii DSM 30040 immobilized on modified polyurethane carrier particles PUR 90/16 was used for continuous glycerol fermentation in an anaerobic fixed bed reactor with effluent recycle and pH control (fixed bed loop reactor). The fermentor was run with buffered mineral medium under growth conditions resulting in the permanent renewal of active biomass. The effects of glycerol concentration in the feed, dilution rate (D), pH and temperature (T) were investigated to optimize the process. With 400 mm glycerol in the feed, pH 6.9, T = 36°C and D = 0.5 h^–1 the maximum productivity could be determined as 8.2 g/l per hour of 1,3-propanediol.     

The effect of yeast extract supplementation on the production of lactic acid from whey permeate byLactobacillus helueticus

Summary Batch and continuous two-stage cultures have been conducted in order to determine the effect of yeast extract (YE) on the homolactic fermentation of whey permeate byLactobacillus helveticus. Supplementation with YE had a significant effet on lactic acid concentration, volumetric productivity, and substrate conversion, but not on lactic acid yield. Volumetric productivity in the first stage increased from 2 to 9 g l^–1 per hour by increasing the YE concentration from 1.5 to 25 g l^–1 At the same time conversion improved from 22% to 93% at a dilution rate of 0.2 h^–1. The second stage demonstrated the effect of YE at a lower dilution rate (0.14 h^–1. A high system conversion (97%) and a high final lactic acid concentration (40 g l^–1) were achieved with 10 g l^–1 YE.     

Comparative studies of fructose 1,6-diphosphate aldolase fromEscherichia coli 518 andLactobacillus casei var.rhamnosus ATCC 7469

A comparative study has been carried out with FDP aldolases fromEscherichia coli 518 andLactobacillus casei ATCC 7469, which had been purified 17.6- and 65-fold, respectively. The aldolase ofL.casei was stable only in the presence of mercaptoethanol, whereas that ofE.coli was strongly inhibited at low (1.0×10^–4 m) and activated at high concentrations (2.0×10^–1 m) of the same compound.p-Chloromercuric benzoic acid inhibited both aldolases, with 40% inhibition at 2×10^–5 m withE.coli aldolase against at 2×10^–4 m withL.casei aldolase. Significant differences were also observed in pH optima and Km values.E.coli aldolase exhibited a maximal activity at pH 9.0 and gave a Km value of 1.76×10^–3 m FDP with strong substrate inhibition above 7×10^–3 m, against pH 6.8–7.0 and a Km of 7.04×10^–3 m FDP forL.casei aldolase. Strong resistance ofL.casei aldolase against inhibition by EDTA, Ca²⁺ and Mn²⁺ was observed compared with complete inhibition at concentrations of 20mm, 40mm and 20mm, respectively, withE. coli aldolase. Polyacrylamide gel electrophoresis did not reveal any differences between the two enzyme preparations.The differences of the properties of FDP aldolases from different bacterial genera are discussed in relation to other Class II aldolases.     

Batch and continuous production of propionic acid from whey permeate by Propionibacterium acidi-propionici in a three-electrode amperometric culture system

Summary Growth of Propionibacterium acidi-propionici was studied on lactose as substrate and in acid whey permeate in a three-electrode poised-potential system with cobalt sepulchrate as artificial electron donor. In batch culture experiments in a stirred-tank reactor the substrate was fermented completely to propionic acid up to 6.5 g 1^–1 lactose in a supplemented whey permeate medium. No acetic acid was produced during the growth of P. acidi-propionici. An electron flow of 80–100 mA was obtained and the electron balance was 101%. In continuously growing cultures with 3 g 1^–1 of lactose as the substrate, propionate was formed as the only fermentation product up to a dilution rate (D) of 0.04 h^–1. With D>0.04 h^–1 the bacteria immobilized on the working electrode surface. It was examined whether an electron transfer occurred between the platinum working electrode and the immobilized cells. Correspondence to: W. Trösch     

Effect of culture conditions on astaxanthin production by a mutant of Phaffia rhodozyma in batch and chemostat culture

Temperature and pH had only a slight effect on the astaxanthin content of a Phaffia rhodozyma mutant, but influenced the maximum specific growth rate and cell yield profoundly. The optimum conditions for astaxanthin production were 22°C at pH 5.0 with a low concentration of carbon source. Astaxanthin production was growth-associated, and the volumetric astaxanthin concentration gradually decreased after depletion of the carbon source. The biomass concentration decreased rapidly during the stationary growth phase with a concomitant increase in the cellular content of astaxanthin. Sucrose hydrolysis exceeded the assimilation rates of D-glucose and D-fructose and these sugars accumulated during batch cultivation. D-Glucose initially delayed D-fructose uptake, but D-fructose utilization commenced before glucose depletion. In continuous culture, the highest astaxanthin content was obtained at the lowest dilution rate of 0.043 h^–1. The cell yield reached a maximum of 0.48 g cells·g^–1 glucose utilized between dilution rates of 0.05 h^–1 and 0.07 h^–1 and decreased markedly at higher dilution rates. Correspondence to: J. C. Du Preez     

Batch fermentation with entrapped growing cells ofLactobacillus casei

Summary Growing cells ofLactobacillus casei were entrapped in-carrageenan/locust bean gum (LBG) (2:1 or 2.75%:0.25% w/w respectively) mixed gel beads (two ranges of diameter: 0.5–1.0 and 1.0–2.0 mm) to fermentLactobacillus Selection (LBS) medium and produce biomass. The results showed significant influence of initial cell loading of the beads and bead size on the fermentation rate. The highest cell release rates were obtained with 2.75%:0.25%-carrageenan/LBG small diameter gel beads. However, 17 h fermentation of LBS medium with immobilized cells resulted in substantial softening of the gel matrix, prohibiting reuse of immobilized biocatalysts as inoculum in subsequent batch fermentation. A dynamic shear rheological study showed that the gel weakness was related to chemical interactions with the medium. Results indicated that part of the matrix-stabilizing K⁺ ions diffused back to the medium. Stabilization of the gel was obtained by adding potassium ions to the LBS medium;L. casei growth was not altered by this supplementation. Fermentation of LBS medium supplemented with KCl byL. casei showed higher cell counts in the broth medium with immobilized cells than with free cells, reaching 10¹⁰ cells/ml after about 10 h with entrapped cells in 0.5–1.0 mm diameter beads and 17 h with free cells. Counts in the gel beads after fermentation were higher than 10¹¹ cells/ml and bead integrity was maintained throughout fermentation.     

Evaluation of alginate-immobilized Lactobacillus casei for lactate production

Summary Lactate production by immobilized Lactobacillus casei has been studied. The cells were immobilized in alginate and the effect of variations in different parameters on product formation and productivity was investigated. The performance of the reaction was evaluated in stirred batch as well as in packed-bed conditions. pH control was a problem in the packed-bed reactor. In stirred batch experiments, nearly total glucose utilization was observed with a lactate yield of 90–99% and a total productivity of 1.6 g·l^–1·h^–1. Under standard conditions only a low percentage (3–4%) of the total lactate formed was the abetd-isomer. When immobilized cells were reused, increased formation of abetd-lactate took place, especially when the cell conditions were sub-optimal. After revitalization by exposure to growth nutrients the balance was restored.On leave from Microbiology Institute, Zhejiang Academy of Agricultural Sciences, Hangzhou-310021, China Offprint requests to: Bo Mattiasson     

Synthesis of l-dopa by escherichia intermedia cells immobilized in a polyacrylamide gel

Summary Escherichia intermedia cells were immobilized by entrapment in a polyacrylamide gel and used for l-dopa synthesis from pyrocatechol, pyruvate and ammonia. An immobilized cell preparation containing 75 mg cells/g gel retained 45%–50% of the activity of free cells. The effect of temperature, pH and substrate concentration of the initial rate of l-dopa synthesis was very similar for free and immobilized cells. Substrate inhibition was observed for pyrocatechol, pyruvate and ammonia. In a batch reactor, 5.4 g·l^-1 l-dopa was obtained, with 100% conversion yield of pyrocatechol and l-dopa productivity of 0.18 g·l^-1·h^-1. The use of a pyrocatechol-borate complex decreased by-product formation and catalyst inactivation.     

Factors which influence the sedimentation characteristics of Torulopsis glabrata after growth in a recirculation system

Summary Some environmental affects on cell aggregation described in the literature are briefly summarized. By means of a biomass recirculation culture (Contact system), using the yeast Torulopsis glabrata, the aggregation behavior of cells in static and in dynamic test systems is described. Sedimentation times required to obtain 50 g · l^–1 yeast dry matter in static systems were always higher than in dynamic ones.In addition to, influencing the biomass yield, the specific growth rate of the yeast also affected cell aggregation. The specific growth rate and therefore the aggregation could be regulated by the biomass recirculation rate as well as by the sedimenter volume.Abbreviations f_o Overflow flow rate (l·h^–1) - f_R Recycle flow rate (l·h^–1) - f_t0t Total flow rate through the fermenter (l·h^–1) - g Gram - h Hour - D_R Fermenter dilution rate due to recycle (h^–1) - D_S Fermeter dilution rate due to substrate (h^–1) - D_tot Total fermenter dilution rate (h^–1) - l Liter - Specific growth rate (h^–1) - P_F Fermenter productivity (g·l^–1·h^–1) - P_FS Overall productivity (g·l^–1·h^–1) - R_pM Rates per minute - RS Residual sugar content in the effluent with respect to the substrate concentration (%) - Y Yield of biomass with respect to sugar concentration (%) - Sed 50 Sedimentation time to reach a YDM of 50 g·l^–1 (min) - V Volume (l) - V_F Fermenter volume (l) - V_Sed Sedimenter volume (l) - VVM Volumes per volume and minute - X_F YDM in the fermenter (g·l^–1) - X_F YDM in the recycle (g·l^–1) - X_S Yeast dry matter due to substrate concentration (g·l^–1) - YDM Yeast dry matter (g·l^–1)     

Continuous production of l(+)-lactic acid by Lactobacillus casei in two-stage systems

A two-stage two-stream chemostat system and a two-stage two-stream immobilized upflow packed-bed reactor system were used for the study of lactic acid production by Lactobacillus casei subsp casei. A mixing ratio of D ₁₂/D ₂= 0.5 (D = dilution rate) resulted in optimum production, making it possible to generate continuously a broth with high lactic acid concentration (48 g l⁻¹) and with a lowered overall content of initial yeast extract (5  g l⁻¹), half the concentration supplied in the one-step process. In the two-stage chemostat system, with the first stage at pH 5.5 and 37 °C and a second stage at pH 6.0, a temperature change from 40 °C to 45 °C in the second stage resulted in a 100% substrate consumption at an overall dilution rate of 0.05 h⁻¹. To increase the cell mass in the system, an adhesive strain of L. casei was used to inoculate two packed-bed reactors, which operated with two mixed feedstock streams at the optimal conditions found above. Lactic acid fermentation started after a lag period of cell growth over foam glass particles. No significant amount of free cells, compared with those adhering to the glass foam, was observed during continuous lactic acid production. The extreme values, 57.5 g l⁻¹ for lactic acid concentration and 9.72 g l⁻¹ h⁻¹ for the volumetric productivity, in upflow packed-bed reactors were higher than those obtained for free cells (48 g l⁻¹  and 2.42 g l⁻¹ h⁻¹) respectively and the highest overall l(+)-lactic acid purity (96.8%) was obtained in the two-chemostat system as compared with the immobilized-cell reactors (93%). Received: 4 December 1997 / Received revision: 23 February 1998 / Accepted: 14 March 1998     

Lactic acid production from whey permeate by immobilized Lactobacillus casei

Two matrices have been assessed for their ability to immobilize Lactobacillus casei cells for lactic acid fermentation in whey permeate medium. Agar at 2% concentration was found to be a better gel than polyacrylamide in its effectiveness to entrap the bacterial cells to carry out batch fermentation up to three repeat runs. Of the various physiological parameters studied, temperature and pH were observed to have no significant influence on the fermentation ability of the immobilized organism. A temperature range of 40–50°C and a pH range of 4.5–6.0 rather than specific values, were found to be optimum when fermentation was carried out under stationary conditions. In batch fermentation ～90% conversion of the substrate (lactose) was achieved in 48 h using immobilized cell gel cubes of 4 × 2 × 2 mm size, containing 400 mg dry bacterial cells per flask and 4.5% w/v (initial) whey lactose content as substrate. However, further increase in substrate levels tested (>4.5% w/v) did not improve the process efficiency. Supplementation of Mg²⁺ (1 mM) and agricultural by-products (mustard oil cake, 6%) in the whey permeate medium further improved the acid production ability of the immobilized cells under study.     

Biooxidation of ferrous iron by immobilized Acidithiobacillus ferrooxidans in poly(vinyl alcohol) cryogel carriers

PVA-cryogels entrapping about 10⁹ cells of Acidithiobacillus ferrooxidans per ml of gel were prepared by freezing-thawing procedure, and the biooxidation of Fe²⁺ by immobilized cells was investigated in a 0.365 l packed-bed bioreactor. Fe²⁺ oxidation fits a plug-flow reaction model well. A maximum oxidation rate of 3.1 g Fe²⁺ l^–1 h^–1 was achieved at the dilution rate of 0.4 h^–1 or higher, while no obvious precipitate was determined at this time. In addition, cell-immobilized PVA-cryogels packed in bioreactor maintained their oxidative ability for more than two months under non-sterile conditions. Nomenclature: C _A0 – Concentration of Fe²⁺ in feed stream (g l^–1) C _A – Concentration of Fe^{2 +} in outlet stream (g l^{– 1}) D – Dilution rate of the packed-bed bioreactor (h^–1) F – Volumetric flow rate of iron solution (l h^–1) F _A0 – Mass flow rate of Fe²⁺ in the feed stream (g h^–1) K – Kinetic constant (l l^–1 h^–1) r _A – Oxidation rate of Fe²⁺ (g l^–1 h^–1) V – Volume of packed-bed bioreactor (l) X _A – Conversion ratio of Fe²⁺ (%)     

2,3-Butanediol production by Enterobacter aerogenes in continuous culture: role of oxygen supply

Summary The influence of oxygen on growth and production of 2,3-butanediol and acetoin by Enterobacter aerogenes was studied in continuous culture. At all dilution rates (D) studied cell mass increased steadily with increasing oxygen uptake rate (OUR), hence the micro-aerobic cultivation was energy-limited. The biomass yield on oxygen increased with D which suggests that cells need more energy for maintenance functions at lower D. At each D an optimal OUR giving highest volumetric productivity for the sum of butanediol and acetoin was found. The optimal OUR increased with D. The occurrence of optimal OURs results from the various effects of O₂ on growth and specific productivity. The latter was found to be a linear function of the specific OUR irrespective of D. At optimal OUR the cells proved to have equal specific OURs and equal specific productivities representing a fixed relationship between fermentative and respiratory metabolism. The product yield based on glucose and corrected for biomass formation was 80%. A product concentration as high as 43 g/l was obtained at D =0.1 h^–1 while the volumetric productivity was the highest at D =0.28 h^–1 (5.6 g/l and hour). The findings further indicate that growth and product generation are obviously non-associated phenomena. Hence, high productivities may be achievable by cell recycling and cell immobilisation systems. Offprint requests to: W.-D. Deckwer     

Growth characteristics of Sanguinaria canadensis L. Cell suspensions and immobilized cultures for production of benzophenanthridine alkaloids

Summary Sanguinaria canadensis L. plants were harvested from a local forest and calli were initiated from leaf explants. The production of benzophenanthridine alkaloids (i.e. sanguinarine, sanguilutine, sanguirubine, chelerythrine, chelilutine and chelirubine) by S. canadensis cell grown in modified B5 and IM2 media was compared to the alkaloid content of rhizomes. Sanguinarine accounted for approximately 80% of the total alkaloid content of cultured cells (1.3%,g g^–1) while sanguinarine and sanguirubine accounted for 70% of rhizome alkaloids (9.0%, g g^–1). Sanguinarine, chelirubine and chererythrine were the only known alkaloids detected in cultured S. canadensis cells. Maximum alkaloid production of cultures performed using B5 medium, containing half the original nitrate concentration, was observed following extracellular nitrate and sugar depletion. The scale-up of this culture was successfully performed in a 2-1 immobilization bioreactor. The consumption of sugar and nitrate as well as the oxygen (OTR) and carbon dioxide (CTR) transfer rates of the immobilized cell culture were monitored for 15 days. The maximum sugar and nitrate consumption rates were 1.8 g l^–1 per day and 2.3 mm per day respectively. The maximum OTR and CTR of the immobilized cell culture were 0.8 mmol O₂ l^–1 h^–1 and 0.95 mmol CO₂ l^–1 h^–1 respectively. The sanguinarine yield of this culture reached 1.0% based on biomass dry weight (g g^–1 dw) by day 15.     

Protein production from whey usingPenicillium cyclopium; growth parameters and cellular composition

Summary The growth parameters ofPenicillium cyclopium have been evaluated in a continuous culture system for the production of fungal protein from whey. Dilution rates varied from 0.05 to 0.20 h^–1 under constant conditions of temperature (28°C) and pH (3.5). The saturation coefficients in the Monod equation were 0.74 g l^–1 for lactose and 0.14 mg l^–1 for oxygen, respectively. For a wide range of dilution rates, the yield was 0.68 g g^–1 biomass per lactose and the maintenance coefficient 0.005 g g^–1 h^–1 lactose per biomass, respectively. The maximum biomass productivity achieved was 2 g l^–1 h^–1 biomass at dilution rates of 0.16–0.17 h^–1 with a lactose concentration of 20 g l^–1 in the feed. The crude protein and total nucleic acid contents increased with a dilution rate, crude protein content varied from 43% to 54% and total nucleic acids from 6 to 9% in the range of dilution rates from 0.05 to 0.2 h^–1, while the Lowry protein content was almost constant at approximately 37.5% of dry matter.Nomenclature (mg l^–1) C_o initial concentration of dissolved oxygen - (h^–1) D dilution rate - (mg l^–1) K₀₂ saturation coefficient for oxygen - (g l^–1) K_s saturation coefficient for substrate - (g g^–1 h^–1) lactose per biomass) m maintenance energy coefficient - (mM g^–1 h^–1O₂ per biomass) Q₀₂ specific oxygen uptake rate - (g l^–1) S residual substrate concentration at steady state - (g l^–1) S_o initial substrate concentration in feed - (min) t_1/2 time when C_o is equal to C_o/2 - (g l^–1) X biomass concentration - (g l^–1) X biomass concentration at steady state - (g g^–1 biomass per lactose) Y_G yield coefficient for cell growth - (g g^–1 biomass per lactose) Y_x/s overall yield coefficient - (h^–1) specific growth rate     

Biological treatment of phenolic wastes: Comparison between free and immobilized cell systems

Summary Phenol degradation by free and immobilized cells ofFusarium flocciferum was studied in a chemostat at steady-state conditions. For the free cell system the dilution rates varied from 0.02 to 0.13h^–1, with a total phenol removal up to 0.08h^–1. Wash-out seemed to set in at 0.11h^–1. The immobilized cells showed virtually complete phenol utilization at 1g/l, over a period of four months. At D=0.2h^–1 and above 1g/l phenol, the complete phenol removal is not achieved: a progressive increase in the outlet concentration was observed attaining a value of 284mg/l at 1.5g/l.     

L-Sorbose production in a continuous fermenter with and without cell recycle

The kinetics of continuous l-sorbose fermentation using Acetobacter suboxydans with and without cell recycle (100%) were investigated at dilution rates (D) of 0.05, 0.10, 0.15 and 0.3 h^–1. The biomass and sorbose concentrations for continuous fermentation without recycle increased as the dilution rate was increased from 0.05 to 0.10 h^–1. A maximum biomass concentration of 8.44 g l^–1 and sorbose concentration of 176.90 g l^–1 were obtained at D=0.10 h^–1. The specific rate of sorbose production and volumetric sorbose productivity at this dilution rate were 2.09 g g^–1 h^–1 and 17.69 g l^–1 h^–1. However, on further increasing the dilution rate to 0.3 h^–1, both biomass and sorbose concentrations decreased to 2.93 and 73.20 g l^–1 respectively, mainly due to washout of the reactor contents. However, the specific rate of sorbose formation and volumetric sorbose productivity at this dilution rate increased to 7.49 g g^–1 h^–1 and 21.96 g l^–1 h^–1 respectively. Continuous fermentation with 100% cell recycle served to further enhance the concentration of biomass and sorbose to 28.27 and 184.32 g l^–1 respectively (in the reactor at a dilution rate of 0.05 h^–1). Even though, there was a decline in the biomass and sorbose concentrations to 6.8 and 83.40 g l^–1 at a dilution rate of 0.3 h^–1, the specific rates of sorbose formation and volumetric sorbose productivity increased to 3.67 g g^–1h^–1 and 25.02 g l^–1 h^–1.     

The oxygen requirements of yeasts for the fermentation of d-xylose and d-glucose to ethanol

Summary The effect of oxygen availability on d-xylose and D-glucose metabolism by Pichia stipitis, Candida shehatae and Pachysolen tannophilus was investigated. Oxygen was not required for fermentation of d-xylose or d-glucose, but stimulated the ethanol production rate from both sugars. Under oxygen-limited conditions, the highest ethanol yield coefficient (Y_e/s) of 0.47 was obtained on d-xylose with. P. stipitis, while under similar conditions C. shehatae fermented d-xylose most rapidly with a specific productivity (q_pmax) of 0.32 h^-1. Both of these yeasts fermented d-xylose better and produced less xylitol than. P. tannophilus. Synthesis of polyols such as xylitol, arabitol, glycerol and ribitol reduced the ethanol yield in some instances and was related to the yeast strain, carbon source and oxygen availability. In general, these yeasts fermented d-glucose more rapidly than d-xylose. By contrast Saccharomyces cerevisiae fermented d-glucose at least three-fold faster under similar conditions.Nomenclature q_pmax maximum specific rate of ethanol production (g ethanol per g dry biomass per hour) - Y_e/s ethanol yield (g ethanol per g substrate utilized) - Y_p/s polyol yield (g polyol per g substrate utilized) - Y_x/s biomass yield (g dry biomass per g substrate utilized) - _max maximum specific growth rate (per hour)     

Development of a structured model for biopolymer synthesis in the fungus Aureobasidium pullulans

Previous modelling of the pullulan fermentation is discussed and found to lack any mechanistic basis. It is concluded that predictive ability can only be conferred by a structured model with at least two compartments, based upon the best available knowledge of the physiology of the microorganism. Such a model is constructed and compared with experimental data.List of Symbols A (gdm^–3)(g/l) Ammonium ion concentration - B (gdm^–3)(g/l) Concentration of balanced growth compartment of biomass - G (gdm^–3)(g/l) Glucose concentration - k _A (gdm^–3)(g/l) Saturation constant for ammonium - k _G (gdm^–3)(g/l) Saturation constant for glucose - k _S (gdm^–3)(g/l) Saturation constant for sucrose - P (gdm^–3)(g/l) Pullulan concentration - Q Quality of biomass=U/(U+B) - r _G (gdm^–1h^–1)(g/l/h) Rate of removal of glucose from broth - r _GB (gdm^–3h^–1)(g/l/h) Rate of incorporation of glucose into balanced compartment - r _GB (gdm^–3h^–1)(g/l/h) Rate of utilisation of glucose for energy production and cell maintenance - r _GP (gdm^–3h^–1)(g/l/h) Rate of conversion of glucose to pullulan - r _GU (gdm^–3h^–1)(g/l/h) Rate of incorporation of glucose into unbalanced compartment - r _s (gdm^–3h^–1)(g/l/h) Rate of conversion of sucrose to glucose - S (gdm^–3)(g/l) Concentration of sucrose - U (gdm^–3)(g/l) Concentration of unbalanced growth compartment of biomass - X (gdm^–3)(g/l) Biomass concentration - Y _G/A Grams of glucose consumed per gram of ammonium consumed - Y _G/B Grams of glucose consumed per gram of balanced biomass produced - Y _G/U Grams of glucose consumed per gram of unbalanced biomass produced - Y _G/P Grams of glucose consumed per gram of pullulan produced - Rate constant for conversion of sucrose to glucose - Rate constant for uptake of glucose by the cells - Model parameter governing inhibition of sucrose conversion and glucose utilisation - Model parameter denoting fraction of glucose uptake devoted to cell maintenance and energy production - Model parameter governing apportionment of glucose between pseudo-growth and pullulan production This work was funded by the National Engineering Laboratory (NEL) through the Bioreactor Design Club. The authors would like to express their gratitude to the NEL for this generous support.     

Continuous culture of Candida boidinii variant 60 growing on methanol

Summary A new variant, Candida boidinii variant 60, which is less sensitive to methanol and formaldehyde shocks was grown in continuous cultures with methanol as sole carbon source. The substrate concentration in the feeding medium was either 1% methanol or 3% methanol. Biomass production, methanol consumption, the formation of formaldehyde and gas exchange were measured at different dilution rates. With low methanol feeding (10 g/l) maximal productivity of 0.44 g biomass/l·h is obtained at a dilution rate of 0.14 h^–1. Maximal specific growth rate is 0.18 h^–1. A yield of 0.32 g biomass/g methanol was obtained and the respiration quotient was determined as 0.55. Independently of initial substrate concentration, biomass decreases if methanol and formaldehyde are accumulating in the culture broth.In the culture with high methanol feeding (30 g/l) cell concentratioon increases up to 9 g/l at D=0.04 h^–1. At higher dilution rates methanol and form-aldehyde appear in the medium. Formaldehyde is then preferably oxidized without energy advantages for the cells. It seems that this enables the cells to overcome toxic effects caused by methanol and formaldehyde.