SEC-MALS-QELS study on the molecular conformation of cellulose in LiCl/amide solutions

The SEC-MALS-QELS (size-exclusion chromatography equipped with multiangle light scattering and quasi-elastic light scattering detectors) method using lithium chloride/N,N-dimethylacetamide (LiCl/DMAc) and LiCl/1,3-dimethyl-2-imidazolidinone (LiCl/DMI) as mobile phases was applied to cellulose and cellulose tricarbanilate (CTC) samples with various average degree of polymerization (DP) values. Molecular conformations of cellulose and CTC in the solvents were then discussed and compared on the basis of the relationships between the radii of gyration (R(g,z) or S(2)(z)(1/2)), the hydrodynamic radii (R(h,z)), and weight-average DP (DP(w)) or the contour lengths (L(w)). The Benoit-Doty theory for wormlike polymer chains was applied to the R(g) vs L(w) data obtained, and the theoretical curves with Kuhn segment lengths l(K) of around 18 nm were found to fit the data of both cellulose and CTC molecules in the solvents. It was concluded from the obtained results that both cellulose and CTC molecules have conformations essentially identical to each other in the solvents; they behave as typical semiflexible chains in good solvents.     

Correlation between antitumor activity, molecular weight, and conformation of lentinan

A (1-->3)-beta-D-glucan having (1-->6) branching (L-FV-IB) from Lentinus edodes in water was degraded into seven fractions of different molecular weights by ultrasonic irradiation, and each was further fractionated into three parts, by precipitation from water into acetone at room temperature. The weight-average molecular weight (M(w)), radius of gyration ((z)(1/2)), and intrinsic viscosity ([eta]) of lentinan and its fractions in 0.9% NaCl aqueous solution and dimethyl sulfoxide (Me(2)SO) were determined by size-exclusion chromatography combined with multi-angle laser light scattering (SEC-LLS), LLS, and viscometry. Analysis of M(w), [eta], and (z)(1/2) in terms of known theory for worm-like chains yielded 2240 +/- 100 nm(-1), and 100 +/- 10 nm for molar mass per unit contour length (M(L)), and persistence length (q), respectively, corresponding with theoretical data for triple-helical chains. The [alpha](D) of lentinan in water-Me(2)SO mixtures indicated an order-disorder transition. The results indicated that lentinan exists as a triple helix in 0.9% NaCl aqueous solution and as a single flexible chain in Me(2)SO. Assays in vivo and in vitro against the growth of Sarcoma 180 solid tumor as well as the colorimetric 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) method for lentinan showed that the triple-helix sample exhibited a relatively high inhibition ratio. Interestingly, the triple-helix lentinan with M(w) of 1.49 x 10(6) exhibited the highest antitumor activity in vivo, having an inhibition ratio (xi) of 49.5%, close to that of 5-fluorouracil (xi = 50.5%), whereas the bioactivity (xi = 12.3%) of its single flexible chains almost disappeared. The triple-helix conformation plays an important role in enhancing the antitumor effects of lentinan.     

Solution properties of an alpha-(1-->3)-D-glucan from Lentinus edodes and its sulfated derivatives

A water-insoluble alpha-(1-->3)-D-glucan (A) from Lentinus edodes was fractionated into 13 fractions in dimethyl sulfoxide containing 0.25 M lithium chloride (0.25 M LiCl-Me(2)SO). Five fractions were treated with sulfur trioxide-pyridine complex at 25 degrees C to synthesize water-soluble sulfated derivatives (S-A). The weight-average molecular weights, M(w), and intrinsic viscosities [eta], of the samples A and S-A were determined by multi-angler laser light scattering (MALLS), and viscosity. The M(w) dependence of [eta] and of the radius of gyration (z)(1/2), was found to be represented approximately by [eta]=4.9 x 10(-2) M(w)(0.67) (cm(3) g(-1)), and (z)(1/2)=4.8 x 10(-2) M(w)(0.54) (nm) for the alpha-glucan in 0.25 M LiCl-Me(2)SO in the M(w) range from 7.24 x 10(4) to 4.21 x 10(5), and by [eta]=6.8 x 10(-4) M(w) 1.06 (cm(3) g(-1)), and (z)(1/2)=9.4 x 10(-4) M(w)(0.92) (nm) for the sulfated alpha-glucan in aqueous 0.5 M NaCl in the M(w) range from 5.92 x 10(4) to 1.42 x 10(5) at 25 degrees C. The results indicate that the alpha-(1-->3)-D-glucan exists as a flexible chain in 0.25 M LiCl-Me(2)SO, and its sulfated derivative in 0.5 M NaCl aqueous has stiffer chains than the original. (13)C NMR indicated that intramolecular hydrogen bonding occurred in the sulfated alpha-glucan, causing the observed chain stiffness.     

Effects of excluded volume and polydispersity on solution properties of lentinan in 0.1 M NaOH solution

Seven lentinan fractions of various weight-average molecular weights (M(w)), ranging from 1.45 x 10(5) to 1.13 x 10(6) g mol(-1) were investigated by static light scattering and viscometry in 0.1M NaOH solution at 25 degrees C. The intrinsic viscosity [eta] - M(w) and radius of gyration s(2)(z) (1/2) - M(w) relationships for lentinan in 0.1M NaOH solution were found to be represented by [eta] = 5.1 x 10(-3)M(w) (0.81) cm(3) g(-1) and s(2)(z) (1/2) = 2.3 x 10(-1)M(w) (0.58) nm, respectively. Focusing on the effects of the M(w) polydispersity with the Schulz-Zimm distribution function, the data of M(w), s(2)(z) (1/2), and [eta] was analyzed on the basis of the Yoshizaki-Nitta-Yamakawa theory for the unperturbed helical wormlike chain combined with the quasi-two-parameter (QTP) theory for excluded-volume effects. The persistence length, molecular weight per unit contour length, and the excluded-volume strength were determined roughly to be 6.2 nm, 980 nm(-1), and 0.1, respectively. Compared with the theoretical value calculated by the Monte Carlo model, the persistence length is longer than that of the single (1 --> 3)-beta-(D)-glucan chain. The results revealed that lentinan exists as single-stranded flexible chains in 0.1M NaOH solution with a certain degree of expansion due to the electrostatic repulsion from the interaction between the OH(-) anions and lentinan molecules.     

Thermally induced conformation change of succinoglycan in aqueous sodium chloride

Static and dynamic light scattering, viscosity, and optical rotation measurements have been made at eight different temperatures between 25 and 75 degrees C on two succinoglycan samples (sodium salt) with weight-average molecular weights M(w) of 7.14 x 10(5) and 3.54 x 10(5) (at 25 degrees C) in 0.01 M aqueous NaCl to investigate the thermally induced order-disorder conformation change of the polysaccharide. Additionally, viscometry and polarimetry have been performed for a sodium salt sample (M(w) = 4.55 x 10(5) at 25 degrees C) whose M(w), z-average radius of gyration (z)(1/2), and hydrodynamic radius R(H) in the aqueous salt had been determined previously. As the temperature increases, M(w), (z)(1/2), R(H), and the intrinsic viscosity for every sample sharply decrease around 55 degrees C where the specific rotation at 300 nm sigmoidally increases. In particular, M(w) at 25 degrees C (i.e., in the ordered helical state) is twice as large as that at 75 degrees C (i.e., in the disordered state). These findings substantiate that the ordered structure is composed of two chains and hence is a double helix. Data analysis shows that this helix at 25 degrees C is characterized by an unperturbed wormlike chain with a helix pitch of about 2 nm (per repeating unit) and a persistence length of about 50 nm and that upon heating, it dissociates directly (i.e., in all-or-none fashion) to disordered chains of a similar contour length but with a much smaller persistence length of about 10 nm. The temperature dependence of the light scattering second viral coefficient is discussed in relation to the association of disordered chains in the cooling process.     

Solution properties of targacanthin (water-soluble part of gum tragacanth exudate from Astragalus gossypinus)

Solution properties of tragacanthin (the water-soluble part of gum tragacanth) were studied by gel permeation chromatography (GPC) combined with multi-angle light scattering and viscometry at 25 degrees C. Photon correlation spectroscopy was used to determine the hydrodynamic radius. Ultrasonic degradation was applied to obtain biopolymer fractions of different molecular weights. The dependence of intrinsic viscosity [eta] and radius of gyration (s2)z(1/2) on weight average molecular mass M(w) for this biopolymer were found to be [eta] = 9.077 x 10(-5) M(w)(0.87) (dL g(-1)) and (s2)z(1/2) in the range of M(w) from 1.8 x 10(5) to 1.6 x 10(6). The conformational parameters of tragacanthin were calculated to be 1111 nm for molar mass per unit contour length (M(L)), 26 nm for persistence length (q) and 1.87 ratio of R(g)/R(h). It was found that the Smidsr?d parameter B, the empirical stiffness parameter was 0.013, which is lower than that of several polysaccharides indicating the stiff backbone for tragacanthin. The rheological behavior of aqueous solutions of gum tragacanth and its insoluble and soluble fractions (bassorin and tragacanthin, respectively) were studied. For concentrations equal to 1%, at 25 degrees C and in the absence of salt, bassorin solution showed the highest viscosity and shear thinning behaviour. Power law and Williamson models were used to describe the rheological behaviour of bassorin and tragacanthin, respectively. Oscillatory shear experiments showed a gel like structure for the bassorin but for tragacanthin the oscillatory data were as would be expected for semi-dilute to concentrated solution of entangled, random coil polymers. NaCl changed the steady and oscillatory rheological properties of both fractions and in this way the final viscosity of bassorin was even less than tragacanthin. The calculated activation energy for bassorin and tragacanthin indicated a more rapid decrease in viscosity with temperature for tragacanthin. The plot of eta(sp,0) versus C[eta] revealed that the transition from dilute to semi-dilute regime occurs at C*[eta] = 2.82 for tragacanthin.     

Molecular mass and chain conformation of carboxymethylated derivatives of beta-glucan from sclerotia of Pleurotus tuber-regium

Seven water-insoluble (1 --> 3)-beta-D-glucan fractions TM8-1 to TM8-7 with weight-average molecular mass M(w) ranged from 2.22 to 77.4 x 10(4) obtained from the sclerotia of Pleurotus tuber-regium were carboxymethylated to produce the water-soluble fractions CTM8-1 to CTM8-7 with M(w) ranged from 3.87 to 87.8 x 10(4). The degree of substitution (DS) of CTM8 fractions was analyzed by ir and elemental analysis (EA) to be 0.3-0.68. The M(w) and the intrinsic viscosity [eta] of the CTM8 fractions were measured by size-exclusion chromatography combined with multiangle laser light scattering (SEC-MALLS), MALLS, and viscometry in phosphate buffer solution (PBS) at 37 degrees C. The dependencies of [eta] and radius of gyration (z) (1/2) on M(w) for the CTM8 samples were found to be [eta] = (8.82 +/- 0.03) x 10(-3) M(w)(0.78 +/- 0.04) (cm(3) g(-1)) and (z) (1/2) = (3.09 +/- 0.05) x 10(-3) M(w)(0.75 +/- 0.06) (nm) in the M(w) range from 3.87 x 10(4) to 53.2 x 10(4). Based on current theories for wormlike chain model, the conformational parameters of the CTM8 were obtained to be 790 (nm(-1)) for M(L), 9.6 (nm) for q, which were higher than those of the native TM8 fractions, suggesting a more extended flexible chain of CTM8 in PBS. On the whole, the CTM8 fractions showed higher antitumor activity than their corresponding TM8 fractions. In view of data from molecular parameters and bioactivity, the antitumor activity of the CTM8 fractions may be correlated to its water solubility and relatively extended chain.     

Green polymer chemistry: living dithiol polymerization via cyclic intermediates

This paper reports the synthesis and characterization of disulfide polymers obtained by oxidation of 2-[2-(2-sulfanylethoxy)ethoxy]ethanethiol (DODT) using a benign, synergistic system comprised of air, dilute hydrogen peroxide and triethylamine as a catalyst that can be recycled. The dn/dc value of the polymer in THF was determined to obtain absolute molecular weight measurements. High molecular weight disulfide polymers (up to M(n) = 250000 g/mol) with polydispersity indices as low as M(w)/M(n) = 1.15 were obtained. Thermal analysis by DSC and TGA demonstrated that the rubbery polymers had a T(g) of -50 °C and began to degrade at 250 °C. Dithiothreitol reduced the polymers back to the original monomeric units in 33 h. MALDI-ToF showed the involvement of oligodisulfide rings (2-14 mers) in the polymerization that displayed the characteristics of a living/controlled polymerization; poly(DODT) was readily chain extended with 1,2-ethanedithiol. The chain extension indicates a class of living polymerization which is governed by radical recombination.     

Asymmetrical-flow field-flow fractionation with on-line multiangle light scattering detection. 1. Application to wormlike chain analysis of weakly stiff polymer chains

Four samples of hyaluronan in the sodium form, ranging in weight-average molecular weight, M(w), from 6.67 x 10(5) to 4.23 x 10(6) were investigated by asymmetrical-flow field-flow fractionation coupled to multiangle light scattering (FlFFF-MALS) in 0.2 M aqueous NaCl at 25 degrees C. M(w) and z-average radii of gyration, R(G)(z)(), obtained via FlFFF-MALS showed a good agreement with the results obtained by conventional static light scattering. Furthermore, the molecular weight dependence of the radius of gyration for sodium hyaluronan obtained via FlFFF-MALS was analyzed on the basis of the Kratky-Porod model for unperturbed wormlike chains combined with the Yamakawa theory for radius expansion factor, and a sufficiently good agreement was observed between the theoretical prediction and experimental data. These results show the potential usage of FlFFF-MALS regarding size separation and molecular characterization even for weakly stiff chains.     

Self-assembly of melanin studied by laser light scattering

The unknown molecular weight and chemical structure of melanin place the study of these pigments outside the range of the classical biochemical techniques; thus in this paper the problem of characterizing these heterogeneous biopolymers was approached by means of light scattering techniques, static and dynamic. The static technique allowed us to identify the macromolecular properties (MW and R(g)(2)(1/2)) of melanin extracted from sepia inksac and of two synthetic analogues: L-Dopa melanin obtained by autooxidation and by enzymatic oxidation by Tyrosinase. By dynamic light scattering (DLS), the hydrodynamic radius R(h) was measured to monitor the temporal behaviour of the polymerization and aggregation processes and R(h) variation by changing the chemical constraints of the polymerization medium, such as pH and ionic strength. The fractal dimension d of the aggregates of melanin, both natural and synthetic, in the past only recognized during the aggregation of the synthetic one by lowering the pH of the medium, was a useful parameter to further investigate and compare the structure of melanin granules of differing origins, revealing for the natural sample, a structure with clusters that are spherical, not largely hydrated and self-assembled, following a reaction limited aggregation kinetics (d=2.38).     

Complex macromolecular chimeras

By combining two living polymerizations, anionic and ring opening (ROP), the following novel multiblock multicomponent linear and miktoarm star (micro-star) polymer/polypeptide hybrids (macromolecular chimeras) were synthesized: Linear, PBLL-b-PBLG-b-PS-b-PBLG-b-PBLL; 3micro-stars, (PS)2(PBLG or PBLL), (PS)(PI)(PBLG or PBLL); 4micro-stars, (PS)2[P(alpha-MeS)](PBLG or PBLL), (PS)2(PBLG or PBLL)2 [PS, polystyrene; PI, polyisoprene; P(alpha-MeS), poly(alpha-methylstyrene); PBLG, poly(gamma-benzyl-L-glutamate); and PBLL, poly(-tert-butyloxycarbonyl-L-lysine)]. The procedure involves (a) the synthesis of end- or in-chain amino-functionalized polymers, by anionic polymerization high vacuum techniques and appropriate linking chemistry and (b) the use of the amino groups for the ROP of alpha-amino acid carboxyanhydrides (NCAs). Molecular characterization revealed the high molecular weight and compositional homogeneity of the macromolecular chimeras prepared. The success of the synthesis was based mainly on the high vacuum techniques used for the ROP of NCAs, ensuring the avoidance of unwanted polymerization mechanisms and termination reactions.     

Utilisation of controlled pore topology for the separation of bioparticles in a mixed-glass beads column

To study the flow of shaped particles in porous media, elution of spherical and rod-like micro-organisms was performed through beds of spherical glass beads. A 0.04 cm/s constant flow rate was used with 5 microm yeast suspensions, 1 microm latex micro-spheres and rod-like bacilli Lactobacillus bulgaricus 6 microm long and 0.5 microm in diameter. Yeast cells' diameter is close to the bacilli length and micro-spheres have the same diameter as bacilli. All particle types have similar density. To make the different packing beds, 1.125 mm coarse beads and 0.1115 mm fine beads were used. Experiments were carried out using a column loaded with the binary packing (volume fraction of coarse particles in the mixture 0.7) or a monosize packing with the same amount of coarse or fine particles as used in the binary packing. Analysis of experimental results was based on two models: pure exclusion effect and hydrodynamic separation model [hydrodynamic chromatography (HDC)]. Results for spheres show that the classic HDC model fits to the experimental data whenever the ratio of particle size to the pathway bend scale is high ( approximately 1/100, micro-spheres). However, if this ratio increases and becomes approximately 1/20, the HDC model needs to be corrected due to the effect of channel wall curvature on exclusion. This led to a modified HDC equation of the form R=B/(1+2lambda-2.8lambda(2)), where R is the retention, lambda is the aspect ratio and constant B>or=1. Bacillus separation follows an exclusion mechanism, since pore topology is important in the separation of shaped particles when the aspect ratio approaches lambda=0.1. In the case of a binary packing bed, rod-like particles display a different behaviour than the one exhibited by the spherical particles of the same scale as bacilli, either in length or in diameter. This may be explained by the interaction between rod-like bacilli and the bed's pore topology. A generalised exclusion model for particles was proposed to be R=A/(1-lambda)(z), where A is the coefficient proportional to the tortuosity and the parameter z=1, 2 or 3 depends mainly on pore shape. Controlled pore topology opens interesting applications for bio-separation (in porous micro-fluidic devices, deep bed filtration) and might be especially important for macromolecules and micro-organisms separation with different shapes.     

Searching for intermediates in the carbon skeleton rearrangement of 2-methyleneglutarate to (R)-3-methylitaconate catalyzed by coenzyme B12-dependent 2-methyleneglutarate mutase from Eubacterium barkeri

Coenzyme B(12)-dependent 2-methyleneglutarate mutase from the strict anaerobe Eubacterium barkeri catalyzes the equilibration of 2-methyleneglutarate with (R)-3-methylitaconate. Proteins with mutations in the highly conserved coenzyme binding-motif DXH(X)(2)G(X)(41)GG (D483N and H485Q) exhibited decreased substrate turnover by 2000-fold and >4000-fold, respectively. These findings are consistent with the notion of H485 hydrogen-bonded to D483 being the lower axial ligand of adenosylcobalamin in 2-methyleneglutarate mutase. (E)- and (Z)-2-methylpent-2-enedioate and all four stereoisomers of 1-methylcyclopropane-1,2-dicarboxylate were synthesized and tested, along with acrylate, with respect to their inhibitory potential. Acrylate and the 2-methylpent-2-enedioates were noninhibitory. Among the 1-methylcyclopropane-1,2-dicarboxylates only the (1R,2R)-isomer displayed weak inhibition (noncompetitive, K(i) = 13 mM). Short incubation (5 min) of 2-methyleneglutarate mutase with 2-methyleneglutarate under anaerobic conditions generated an electron paramagnetic resonance (EPR) signal (g(xy) approximately 2.1; g(z) approximately 2.0), which by analogy with the findings on glutamate mutase from Clostridium cochlearium [Biochemistry, 1998, 37, 4105-4113] was assigned to cob(II)alamin coupled to a carbon-centered radical. At longer incubation times (>1 h), inactivation of the mutase occurred concomitant with the formation of oxygen-insensitive cob(II)alamin (g(xy) approximately 2.25; g(z) approximately 2.0). In order to identify the carbon-centered radical, various (13)C- and one (2)H-labeled substrate/product molecules were synthesized. Broadening (0.5 mT) of the EPR signal around g = 2.1 was observed only when C2 and/or C4 of 2-methyleneglutarate was labeled. No effect on the EPR signals was seen when [5'-(13)C]adenosylcobalamin was used as coenzyme. The inhibition and EPR data are discussed in the context of the addition-elimination and fragmentation-recombination mechanisms proposed for 2-methyleneglutarate mutase.     

A comparison of weight average and direct boundary fitting of sedimentation velocity data for indefinite polymerizing systems

Analysis of sedimentation velocity data for indefinite self-associating systems is often achieved by fitting of weight average sedimentation coefficients (s(20,w)) However, this method discriminates poorly between alternative models of association and is biased by the presence of inactive monomers and irreversible aggregates. Therefore, a more robust method for extracting the binding constants for indefinite self-associating systems has been developed. This approach utilizes a set of fitting routines (SedAnal) that perform global non-linear least squares fits of up to 10 sedimentation velocity experiments, corresponding to different loading concentrations, by a combination of finite element simulations and a fitting algorithm that uses a simplex convergence routine to search parameter space. Indefinite self-association is analyzed with the software program isodesfitter, which incorporates user provided functions for sedimentation coefficients as a function of the degree of polymerization for spherical, linear and helical polymer models. The computer program hydro was used to generate the sedimentation coefficient values for the linear and helical polymer assembly mechanisms. Since this curve fitting method directly fits the shape of the sedimenting boundary, it is in principle very sensitive to alternative models and the presence of species not participating in the reaction. This approach is compared with traditional fitting of weight average data and applied to the initial stages of Mg(2+)-induced tubulin self-associating into small curved polymers, and vinblastine-induced tubulin spiral formation. The appropriate use and limitations of the methods are discussed.     

Molecular dynamics simulation for shape change of water-in-oil droplets

We performed molecular dynamics (MD) simulations of water-in-oil droplet shape transformations induced by the addition of polymer chains. In a prior experiment, transformations of spherical droplets to rod-like, worm-like and network-like droplets were observed. In our previous study, we reproduced rod-like droplets via coarse-grained MD simulations, and the mechanism for the droplet shape change was elucidated by considering the contact area between the chains and the surfactant head groups. However, in that simulation model, we could not reproduce the worm-like and network-like droplets. In this study, we improved the simulation model. For a small number of chains, several spherical droplets were obtained. As the number of chains increased, the spherical droplets were transformed to rod-like, worm-like and network-like shapes by coalescence of the droplets. The calculated and experimental results agreed well, and we verified that the mechanism for the droplet shape transformations observed in the present simulations could be explained by the mechanism suggested in the previous study.     

Artificial mixed-linked β-glucans produced by glycosynthase-catalyzed polymerization: tuning morphology and degree of polymerization

The glycosynthase derived from Bacillus licheniformis 1,3-1,4-β-glucanase was able to polymerize glycosyl fluoride donors (G4)(m)G3GαF (m = 0-2, G = Glcβ) leading to artificial mixed-linked β-glucans with regular sequences and variable β1,3 to β1,4 linkage ratios. With the E134A glycosynthase mutant, polymers had average molecular masses (M(w)) of 10-15 kDa. Whereas polymer 2 ([4G4G3G](n)) was an amorphous precipitate, the water-insoluble polymers 1 ([4G3G](n)) and 3 ([4G4G4G3G](n)) formed spherulites of 10-20 μm diameter. With the more active E134S glycosynthase mutant, polymerization led to high molecular mass polysaccharides, where M(w) was linearly dependent on enzyme concentration. Remarkably, a homo-polysaccharide [4G4G4G3G](n) with M(w) as high as 30.5 kDa (n ≈ 47) was obtained, which contained a small fraction of products up to 70 kDa, a value that is in the range of the molecular masses of low viscosity cereal 1,3-1,4-β-glucans, and among the largest products produced by a glycosynthase. Access to a range of novel tailor-made β-glucans through the glycosynthase technology will allow to evaluate the implications of polysaccharide fine structures in their physicochemical properties and their applications as biomaterials, as well as to provide valuable tools for biochemical characterization of β-glucan degrading enzymes and binding modules.     

Synthesis of β(1–2)glucan in Rhizobium loti

Fast growing strains of Rhizobium loti isolated from nodules of Lotus tenuis of the flooding Pampas of Argentina produced cellular (1–2)glucans having a higher degree of polymerization and more anionic substituents than (1–2)glucans accumulated by Agrobacterium tumefaciens cells. Inner membranes of R. loti contained a 235 kDa (1–2)glucan intermediate protein indistinguishable by polyacrylamide gel electrophoresis from the intermediate protein present in A. tumefaciens inner membranes. Incubation of inner membrannes of R. loti with UDP-Gle led to the formation of neutral (1–2)glucans with a higher degree of polymerization than glucans formed by A. tumefaciens inner membranes.Introduction in R. loti strains of plasmid pCD523 containing A. tumefaciens chvA and chvB virulence regions yielded strains that accumulated 4 times more cellular (1–2)glucans than wild type cells. This glucan was, regarding anionic substitution and degree of polymerization, indistinguishable from A. tumefaciens (1–2)glucans. Furthermore inner membranes of these R. loti exoconjugant cells contained higher levels of the 235 kDa (1–2)glucan intermediate protein and formed in vitro 8 times more neutral (1–2)glucan with a degree of polymerization corresponding to A. tumefaciens (1–2)glucan than inner membranes isolated from wild type cells.It was concluded that A. tumefaciens chvB gene is expressed in R. loti and determined the degree of polymerization of (1–2)glucan.Abbreviations Nod⁺ effective nodulation - Vir⁺ virulent - Vir^- avirulent - Trp^r trimethoprim resistence - Tc^r tetracycline resistence - TCA trichloroacetic acid - PMSF phenyl methyl sulfonyl fluoride     

Chain stiffness of heteropolysaccharide from Aeromonas gum in dilute solution by dynamic light scattering

Dynamic light scattering measurements have been made on 15 fractions of aeromonas (A) gum, an extracellular heteropolysaccharide produced by the strain Aeromonas nichidenii, with dimethylsulfoxide containing 0.2M lithium chloride as the solvent at 25 degrees C. Data for the translational diffusion coefficient D covering a molecular weight range from 4.5 x 10(5) to 2.1 x 10(6) and ratios of the z-average radius of gyration (z) (1/2) to the hydrodynamic radius R(H) (calculated with previous (z) data) suggest that the polymer behaves like a semiflexible chain in this solvent similar to the stiffness of cellulose derivatives. Thus the D data are analyzed on the basis of the Yamakawa-Fujii theory for the translational friction coefficient of a wormlike cylinder by coarse-graining the heteropolysaccharide molecule. Excluded-volume effects are taken into account in the quasi-two-parameter scheme, as was done previously for (z) and [eta] (the intrinsic viscosity) of A gum in the same solvent. The molecular weight dependence of R(H) is found to be explained by the perturbed wormlike chain with a persistence length of 10 nm, a linear mass density of 1350 nm(-1), an excluded-volume strength parameter of 1.3 nm, and a chain diameter of 2.8 nm. These parameters are in substantial agreement with those estimated previously from (z) and [eta] data, demonstrating that the solution properties (D, (z), and [eta]) of the heteropolysaccharide are almost quantitatively described by the current theories for wormlike chains in the molecular weight range studied.     

Synthesis and Cell Adhesive Properties of Linear and Cyclic RGD Functionalized Polynorbornene Thin Films

Described herein is the efficient synthesis and evaluation of bioactive arginine-glycine-aspartic acid (RGD) functionalized polynorbornene-based materials for cell adhesion and spreading. Polynorbornenes containing either linear or cyclic RGD peptides were synthesized by ring-opening metathesis polymerization (ROMP) using the well-defined ruthenium initiator [(H(2)IMes)(pyr)(2)(Cl)(2)Ru═CHPh]. The random copolymerization of three separate norbornene monomers allowed for the incorporation of water-soluble polyethylene glycol (PEG) moieties, RGD cell recognition motifs, and primary amines for postpolymerization cross-linking. Following polymer synthesis, thin-film hydrogels were formed by cross-linking with bis(sulfosuccinimidyl) suberate (BS(3)), and the ability of these materials to support human umbilical vein endothelial cell (HUVEC) adhesion and spreading was evaluated and quantified. When compared to control polymers containing either no peptide or a scrambled RDG peptide, polymers with linear or cyclic RGD at varying concentrations displayed excellent cell adhesive properties in both serum-supplemented and serum-free media. Polymers with cyclic RGD side chains maintained cell adhesion and exhibited comparable integrin binding at a 100-fold lower concentration than those carrying linear RGD peptides. The precise control of monomer incorporation enabled by ROMP allows for quantification of the impact of RGD structure and concentration on cell adhesion and spreading. The results presented here will serve to guide future efforts for the design of RGD functionalized materials with applications in surgery, tissue engineering, and regenerative medicine.     

Synthesis of multiarm star poly(glycerol)-block-poly(2-hydroxyethyl methacrylate)

Well-defined multiarm star block copolymers poly(glycerol)-b-poly(2-hydroxyethyl methacrylate) (PG-b-PHEMA) with an average of 56, 66, and 90 PHEMA arms, respectively, have been prepared by atom transfer radical polymerization (ATRP) of HEMA in methanol by a core-first strategy. The hyperbranched macroinitiators employed were prepared on the basis of well-defined hyperbranched polyglycerol by esterification with 2-bromoisobutyryl bromide. Polydispersites M(w)/M(n) of the new multiarm stars were in the range of 1.11-1.82. Unexpectedly, with the combination of CuCl/CuBr(2)/2,2'-bipyridyl as catalyst, the polymerization conversion can be driven to maximum values of 79%. The control of CuCl catalyst concentration is also very important to achieve high conversion and narrow polydispersity. The absolute M(n) values of the obtained multiarm star polymers were in good agreement with the calculated ones, and the highest M(n) values of the multiarm star copolymer is around 10(6) g/mol. Kinetic analysis shows that an induction period exists in the polymerization of HEMA. After this induction period, a linear dependence of ln ([M](0)/[M](t)()) on time was observed. Due to the star architecture, the viscosity of the obtained multiarm star PHEMA is much lower than that of linear PHEMA.