Analyses on hydrophobicity and attractiveness of all‐atom distance‐dependent potentials

Accurate model evaluation is a crucial step in protein structure prediction. For this purpose, statistical potentials, which evaluate a model structure based on the observed atomic distance frequencies in comparison with those in reference states, have been widely used. The reference state is a virtual state where all of the atomic interactions are turned off, and it provides a standard to measure the observed frequencies. In this study, we examined seven all‐atom distance‐dependent potentials with different reference states. As results, we observed that the variations of atom pair composition and those of distance distributions in the reference states produced systematic changes in the hydrophobic and attractive characteristics of the potentials. The performance evaluations with the CASP7 structures indicated that the preference of hydrophobic interactions improved the correlation between the energy and the GDT‐TS score, but decreased the Z‐score of the native structure. The attractiveness of potential improved both the correlation and Z‐score for template‐based modeling targets, but the benefit was smaller in free modeling targets. These results indicated that the performances of the potentials were more strongly influenced by their characteristics than by the accuracy of the definitions of the reference states.     

General and targeted statistical potentials for protein-ligand interactions

We present a novel atom-atom potential derived from a database of protein-ligand complexes. First, we clarify the similarities and differences between two statistical potentials described in the literature, PMF and Drugscore. We highlight shortcomings caused by an important factor unaccounted for in their reference states, and describe a new potential, which we name the Astex Statistical Potential (ASP). ASP's reference state considers the difference in exposure of protein atom types towards ligand binding sites. We show that this new potential predicts binding affinities with an accuracy similar to that of Goldscore and Chemscore. We investigate the influence of the choice of reference state by constructing two additional statistical potentials that differ from ASP only in this respect. The reference states in these two potentials are defined along the lines of Drugscore and PMF. In docking experiments, the potential using the new reference state proposed for ASP gives better success rates than when these literature reference states were used; a success rate similar to the established scoring functions Goldscore and Chemscore is achieved with ASP. This is the case both for a large, general validation set of protein-ligand structures and for small test sets of actives against four pharmaceutically relevant targets. Virtual screening experiments for these targets show less discrimination between the different reference states in terms of enrichment. In addition, we describe how statistical potentials can be used in the construction of targeted scoring functions. Examples are given for cdk2, using four different targeted scoring functions, biased towards increasingly large target-specific databases. Using these targeted scoring functions, docking success rates as well as enrichments are significantly better than for the general ASP scoring function. Results improve with the number of structures used in the construction of the target scoring functions, thus illustrating that these targeted ASP potentials can be continuously improved as new structural data become available.     

Optimized distance‐dependent atom‐pair‐based potential DOOP for protein structure prediction

The DOcking decoy‐based Optimized Potential (DOOP) energy function for protein structure prediction is based on empirical distance‐dependent atom‐pair interactions. To optimize the atom‐pair interactions, native protein structures are decomposed into polypeptide chain segments that correspond to structural motives involving complete secondary structure elements. They constitute near native ligand–receptor systems (or just pairs). Thus, a total of 8609 ligand–receptor systems were prepared from 954 selected proteins. For each of these hypothetical ligand–receptor systems, 1000 evenly sampled docking decoys with 0–10 Å interface root‐mean‐square‐deviation (iRMSD) were generated with a method used before for protein–protein docking. A neural network‐based optimization method was applied to derive the optimized energy parameters using these decoys so that the energy function mimics the funnel‐like energy landscape for the interaction between these hypothetical ligand–receptor systems. Thus, our method hierarchically models the overall funnel‐like energy landscape of native protein structures. The resulting energy function was tested on several commonly used decoy sets for native protein structure recognition and compared with other statistical potentials. In combination with a torsion potential term which describes the local conformational preference, the atom‐pair‐based potential outperforms other reported statistical energy functions in correct ranking of native protein structures for a variety of decoy sets. This is especially the case for the most challenging ROSETTA decoy set, although it does not take into account side chain orientation‐dependence explicitly. The DOOP energy function for protein structure prediction, the underlying database of protein structures with hypothetical ligand–receptor systems and their decoys are freely available at http://agknapp.chemie.fu‐berlin.de/doop/ . Proteins 2015; 83:881–890. © 2015 Wiley Periodicals, Inc.     

Distance-scaled,finite ideal-gas reference state improves structure-derived potentials of mean force for structure selection and stability prediction

The distance-dependent structure-derived potentials developed so far all employed a reference state that can be characterized as a residue (atom)-averaged state. Here, we establish a new reference state called the distance-scaled, finite ideal-gas reference (DFIRE) state. The reference state is used to construct a residue-specific all-atom potential of mean force from a database of 1011 nonhomologous (less than 30% homology) protein structures with resolution less than 2 A. The new all-atom potential recognizes more native proteins from 32 multiple decoy sets, and raises an average Z-score by 1.4 units more than two previously developed, residue-specific, all-atom knowledge-based potentials. When only backbone and C(beta) atoms are used in scoring, the performance of the DFIRE-based potential, although is worse than that of the all-atom version, is comparable to those of the previously developed potentials on the all-atom level. In addition, the DFIRE-based all-atom potential provides the most accurate prediction of the stabilities of 895 mutants among three knowledge-based all-atom potentials. Comparison with several physical-based potentials is made.     

A pairwise residue contact area-based mean force potential for discrimination of native protein structure

Background  

Considering energy function to detect a correct protein fold from incorrect ones is very important for protein structure prediction and protein folding. Knowledge-based mean force potentials are certainly the most popular type of interaction function for protein threading. They are derived from statistical analyses of interacting groups in experimentally determined protein structures. These potentials are developed at the atom or the amino acid level. Based on orientation dependent contact area, a new type of knowledge-based mean force potential has been developed.     

Extracting the excitonic Hamiltonian of the Fenna-Matthews-Olson complex using three-dimensional third-order electronic spectroscopy

An accurate scoring function is a key component for successful protein structure prediction. To address this important unsolved problem, we develop a generalized orientation and distance-dependent all-atom statistical potential. The new statistical potential, generalized orientation-dependent all-atom potential (GOAP), depends on the relative orientation of the planes associated with each heavy atom in interacting pairs. GOAP is a generalization of previous orientation-dependent potentials that consider only representative atoms or blocks of side-chain or polar atoms. GOAP is decomposed into distance- and angle-dependent contributions. The DFIRE distance-scaled finite ideal gas reference state is employed for the distance-dependent component of GOAP. GOAP was tested on 11 commonly used decoy sets containing 278 targets, and recognized 226 native structures as best from the decoys, whereas DFIRE recognized 127 targets. The major improvement comes from decoy sets that have homology-modeled structures that are close to native (all within ∼4.0 Å) or from the ROSETTA ab initio decoy set. For these two kinds of decoys, orientation-independent DFIRE or only side-chain orientation-dependent RWplus performed poorly. Although the OPUS-PSP block-based orientation-dependent, side-chain atom contact potential performs much better (recognizing 196 targets) than DFIRE, RWplus, and dDFIRE, it is still ∼15% worse than GOAP. Thus, GOAP is a promising advance in knowledge-based, all-atom statistical potentials. GOAP is available for download at http://cssb.biology.gatech.edu/GOAP.     

A free-rotating and self-avoiding chain model for deriving statistical potentials based on protein structures

Statistical potentials have been widely used in protein studies despite the much-debated theoretical basis. In this work, we have applied two physical reference states for deriving the statistical potentials based on protein structure features to achieve zero interaction and orthogonalization. The free-rotating chain-based potential applies a local free-rotating chain reference state, which could theoretically be described by the Gaussian distribution. The self-avoiding chain-based potential applies a reference state derived from a database of artificial self-avoiding backbones generated by Monte Carlo simulation. These physical reference states are independent of known protein structures and are based solely on the analytical formulation or simulation method. The new potentials performed better and yielded higher Z-scores and success rates compared to other statistical potentials. The end-to-end distance distribution produced by the self-avoiding chain model was similar to the distance distribution of protein atoms in structure database. This fact may partly explain the basis of the reference states that depend on the atom pair frequency observed in the protein database. The current study showed that a more physical reference model improved the performance of statistical potentials in protein fold recognition, which could also be extended to other types of applications.     

Reduced C(beta) statistical potentials can outperform all-atom potentials in decoy identification

We developed a series of statistical potentials to recognize the native protein from decoys, particularly when using only a reduced representation in which each side chain is treated as a single C(beta) atom. Beginning with a highly successful all-atom statistical potential, the Discrete Optimized Protein Energy function (DOPE), we considered the implications of including additional information in the all-atom statistical potential and subsequently reducing to the C(beta) representation. One of the potentials includes interaction energies conditional on backbone geometries. A second potential separates sequence local from sequence nonlocal interactions and introduces a novel reference state for the sequence local interactions. The resultant potentials perform better than the original DOPE statistical potential in decoy identification. Moreover, even upon passing to a reduced C(beta) representation, these statistical potentials outscore the original (all-atom) DOPE potential in identifying native states for sets of decoys. Interestingly, the backbone-dependent statistical potential is shown to retain nearly all of the information content of the all-atom representation in the C(beta) representation. In addition, these new statistical potentials are combined with existing potentials to model hydrogen bonding, torsion energies, and solvation energies to produce even better performing potentials. The ability of the C(beta) statistical potentials to accurately represent protein interactions bodes well for computational efficiency in protein folding calculations using reduced backbone representations, while the extensions to DOPE illustrate general principles for improving knowledge-based potentials.     

Three enhancements to the inference of statistical protein‐DNA potentials

The energetics of protein‐DNA interactions are often modeled using so‐called statistical potentials, that is, energy models derived from the atomic structures of protein‐DNA complexes. Many statistical protein‐DNA potentials based on differing theoretical assumptions have been investigated, but little attention has been paid to the types of data and the parameter estimation process used in deriving the statistical potentials. We describe three enhancements to statistical potential inference that significantly improve the accuracy of predicted protein‐DNA interactions: (i) incorporation of binding energy data of protein‐DNA complexes, in conjunction with their X‐ray crystal structures, (ii) use of spatially‐aware parameter fitting, and (iii) use of ensemble‐based parameter fitting. We apply these enhancements to three widely‐used statistical potentials and use the resulting enhanced potentials in a structure‐based prediction of the DNA binding sites of proteins. These enhancements are directly applicable to all statistical potentials used in protein‐DNA modeling, and we show that they can improve the accuracy of predicted DNA binding sites by up to 21%. Proteins 2013. © 2012 Wiley Periodicals, Inc.     

Absolute quality evaluation of protein model structures using statistical potentials with respect to the native and reference states

In protein structure prediction, it is crucial to evaluate the degree of native-likeness of given model structures. Statistical potentials extracted from protein structure data sets are widely used for such quality assessment problems, but they are only applicable for comparing different models of the same protein. Although various other methods, such as machine learning approaches, were developed to predict the absolute similarity of model structures to the native ones, they required a set of decoy structures in addition to the model structures. In this paper, we tried to reformulate the statistical potentials as absolute quality scores, without using the information from decoy structures. For this purpose, we regarded the native state and the reference state, which are necessary components of statistical potentials, as the good and bad standard states, respectively, and first showed that the statistical potentials can be regarded as the state functions, which relate a model structure to the native and reference states. Then, we proposed a standardized measure of protein structure, called native-likeness, by interpolating the score of a model structure between the native and reference state scores defined for each protein. The native-likeness correlated with the similarity to the native structures and discriminated the native structures from the models, with better accuracy than the raw score. Our results show that statistical potentials can quantify the native-like properties of protein structures, if they fully utilize the statistical information obtained from the data set.     

Statistical mechanics-based method to extract atomic distance-dependent potentials from protein structures

In this study, we have developed a statistical mechanics-based iterative method to extract statistical atomic interaction potentials from known, nonredundant protein structures. Our method circumvents the long-standing reference state problem in deriving traditional knowledge-based scoring functions, by using rapid iterations through a physical, global convergence function. The rapid convergence of this physics-based method, unlike other parameter optimization methods, warrants the feasibility of deriving distance-dependent, all-atom statistical potentials to keep the scoring accuracy. The derived potentials, referred to as ITScore/Pro, have been validated using three diverse benchmarks: the high-resolution decoy set, the AMBER benchmark decoy set, and the CASP8 decoy set. Significant improvement in performance has been achieved. Finally, comparisons between the potentials of our model and potentials of a knowledge-based scoring function with a randomized reference state have revealed the reason for the better performance of our scoring function, which could provide useful insight into the development of other physical scoring functions. The potentials developed in this study are generally applicable for structural selection in protein structure prediction.     

Using the Unfolded State as the Reference State Improves the Performance of Statistical Potentials

Distance-dependent statistical potentials are an important class of energy functions extensively used in modeling protein structures and energetics. These potentials are obtained by statistically analyzing the proximity of atoms in all combinatorial amino-acid pairs in proteins with known structures. In model evaluation, the statistical potential is usually subtracted by the value of a reference state for better selectivity. An ideal reference state should include the general chemical properties of polypeptide chains so that only the unique factors stabilizing the native structures are retained after calibrating on reference state. However, reference states available as of this writing rarely model specific chemical constraints of peptide bonds and therefore poorly reflect the behavior of polypeptide chains. In this work, we proposed a statistical potential based on unfolded state ensemble (SPOUSE), where the reference state is summarized from the unfolded state ensembles of proteins produced according to the statistical coil model. Due to its better representation of the features of polypeptides, SPOUSE outperforms three of the most widely used distance-dependent potentials not only in native conformation identification, but also in the selection of close-to-native models and correlation coefficients between energy and model error. Furthermore, SPOUSE shows promising possibility of further improvement by integration with the orientation-dependent side-chain potentials.     

Effects of amino acid composition, finite size of proteins, and sparse statistics on distance-dependent statistical pair potentials

Statistical distance dependent pair potentials are frequently used in a variety of folding, threading, and modeling studies of proteins. The applicability of these types of potentials is tightly connected to the reliability of statistical observations. We explored the possible origin and extent of false positive signals in statistical potentials by analyzing their distance dependence in a variety of randomized protein-like models. While on average potentials derived from such models are expected to equal zero at any distance, we demonstrate that systematic and significant distortions exist. These distortions originate from the limited statistical counts in local environments of proteins and from the limited size of protein structures at large distances. We suggest that these systematic errors in statistical potentials are connected to the dependence of amino acid composition on protein size and to variation in protein sizes. Additionally, atom-based potentials are dominated by a false positive signal that is due to correlation among distances measured from atoms of one residue to atoms of another residue. The significance of residue-based pairwise potentials at various spatial pair separations was assessed in this study and it was found that as few as approximately 50% of potential values were statistically significant at distances below 4 A, and only at most approximately 80% of them were significant at larger pair separations. A new definition for reference state, free of the observed systematic errors, is suggested. It has been demonstrated to generate statistical potentials that compare favorably to other publicly available ones.     

rsRNASP: A residue-separation-based statistical potential for RNA 3D structure evaluation

Knowledge-based statistical potentials have been shown to be rather effective in protein 3-dimensional (3D) structure evaluation and prediction. Recently, several statistical potentials have been developed for RNA 3D structure evaluation, while their performances are either still at a low level for the test datasets from structure prediction models or dependent on the “black-box” process through neural networks. In this work, we have developed an all-atom distance-dependent statistical potential based on residue separation for RNA 3D structure evaluation, namely rsRNASP, which is composed of short- and long-ranged potentials distinguished by residue separation. The extensive examinations against available RNA test datasets show that rsRNASP has apparently higher performance than the existing statistical potentials for the realistic test datasets with large RNAs from structure prediction models, including the newly released RNA-Puzzles dataset, and is comparable to the existing top statistical potentials for the test datasets with small RNAs or near-native decoys. In addition, rsRNASP is superior to RNA3DCNN, a recently developed scoring function through 3D convolutional neural networks. rsRNASP and the relevant databases are available to the public.     

VoroMQA: Assessment of protein structure quality using interatomic contact areas

In the absence of experimentally determined protein structure many biological questions can be addressed using computational structural models. However, the utility of protein structural models depends on their quality. Therefore, the estimation of the quality of predicted structures is an important problem. One of the approaches to this problem is the use of knowledge‐based statistical potentials. Such methods typically rely on the statistics of distances and angles of residue‐residue or atom‐atom interactions collected from experimentally determined structures. Here, we present VoroMQA (Voronoi tessellation‐based Model Quality Assessment), a new method for the estimation of protein structure quality. Our method combines the idea of statistical potentials with the use of interatomic contact areas instead of distances. Contact areas, derived using Voronoi tessellation of protein structure, are used to describe and seamlessly integrate both explicit interactions between protein atoms and implicit interactions of protein atoms with solvent. VoroMQA produces scores at atomic, residue, and global levels, all in the fixed range from 0 to 1. The method was tested on the CASP data and compared to several other single‐model quality assessment methods. VoroMQA showed strong performance in the recognition of the native structure and in the structural model selection tests, thus demonstrating the efficacy of interatomic contact areas in estimating protein structure quality. The software implementation of VoroMQA is freely available as a standalone application and as a web server at http://bioinformatics.lt/software/voromqa . Proteins 2017; 85:1131–1145. © 2017 Wiley Periodicals, Inc.     

What is the best reference state for designing statistical atomic potentials in protein structure prediction?

Many statistical potentials were developed in last two decades for protein folding and protein structure recognition. The major difference of these potentials is on the selection of reference states to offset sampling bias. However, since these potentials used different databases and parameter cutoffs, it is difficult to judge what the best reference states are by examining the original programs. In this study, we aim to address this issue and evaluate the reference states by a unified database and programming environment. We constructed distance-specific atomic potentials using six widely-used reference states based on 1022 high-resolution protein structures, which are applied to rank modeling in six sets of structure decoys. The reference state on random-walk chain outperforms others in three decoy sets while those using ideal-gas, quasi-chemical approximation and averaging sample stand out in one set separately. Nevertheless, the performance of the potentials relies on the origin of decoy generations and no reference state can clearly outperform others in all decoy sets. Further analysis reveals that the statistical potentials have a contradiction between the universality and pertinence, and optimal reference states should be extracted based on specific application environments and decoy spaces.     

A novel side-chain orientation dependent potential derived from random-walk reference state for protein fold selection and structure prediction

Background

An accurate potential function is essential to attack protein folding and structure prediction problems. The key to developing efficient knowledge-based potential functions is to design reference states that can appropriately counteract generic interactions. The reference states of many knowledge-based distance-dependent atomic potential functions were derived from non-interacting particles such as ideal gas, however, which ignored the inherent sequence connectivity and entropic elasticity of proteins.

Methodology

We developed a new pair-wise distance-dependent, atomic statistical potential function (RW), using an ideal random-walk chain as reference state, which was optimized on CASP models and then benchmarked on nine structural decoy sets. Second, we incorporated a new side-chain orientation-dependent energy term into RW (RWplus) and found that the side-chain packing orientation specificity can further improve the decoy recognition ability of the statistical potential.

Significance

RW and RWplus demonstrate a significantly better ability than the best performing pair-wise distance-dependent atomic potential functions in both native and near-native model selections. It has higher energy-RMSD and energy-TM-score correlations compared with other potentials of the same type in real-life structure assembly decoys. When benchmarked with a comprehensive list of publicly available potentials, RW and RWplus shows comparable performance to the state-of-the-art scoring functions, including those combining terms from multiple resources. These data demonstrate the usefulness of random-walk chain as reference states which correctly account for sequence connectivity and entropic elasticity of proteins. It shows potential usefulness in structure recognition and protein folding simulations. The RW and RWplus potentials, as well as the newly generated I-TASSER decoys, are freely available in http://zhanglab.ccmb.med.umich.edu/RW.     

Analysis of knowledge-based protein-ligand potentials using a self-consistent method

We propose a self-consistent approach to analyze knowledge-based atom-atom potentials used to calculate protein-ligand binding energies. Ligands complexed to actual protein structures were first built using the SMoG growth procedure (DeWitte & Shakhnovich, 1996) with a chosen input potential. These model protein-ligand complexes were used to construct databases from which knowledge-based protein-ligand potentials were derived. We then tested several different modifications to such potentials and evaluated their performance on their ability to reconstruct the input potential using the statistical information available from a database composed of model complexes. Our data indicate that the most significant improvement resulted from properly accounting for the following key issues when estimating the reference state: (1) the presence of significant nonenergetic effects that influence the contact frequencies and (2) the presence of correlations in contact patterns due to chemical structure. The most successful procedure was applied to derive an atom-atom potential for real protein-ligand complexes. Despite the simplicity of the model (pairwise contact potential with a single interaction distance), the derived binding free energies showed a statistically significant correlation (approximately 0.65) with experimental binding scores for a diverse set of complexes.