A Highly Unusual Thioester Bond in a Pilus Adhesin Is Required for Efficient Host Cell Interaction

Many bacterial pathogens present adhesins at the tips of long macromolecular filaments known as pili that are often important virulence determinants. Very little is known about how pili presented by Gram-positive pathogens mediate host cell binding. The crystal structure of a pilus adhesin from the important human pathogen Streptococcus pyogenes reveals an internal thioester bond formed between the side chains of a cysteine and a glutamine residue. The presence of the thioester was verified using UV-visible spectroscopy and mass spectrometry. This unusual bond has only previously been observed in thioester domains of complement and complement-like proteins where it is used to form covalent attachment to target molecules. The structure also reveals two intramolecular isopeptide bonds, one of these formed through a Lys/Asp residue pair, which are strategically positioned to confer protein stability. Removal of the internal thioester by allele-replacement mutagenesis in S. pyogenes severely compromises bacterial adhesion to model host cells. Although current paradigms of bacterial/host cell interaction envisage strong non-covalent interactions, the present study suggests cell adhesion could also involve covalent bonds.     

Solution structure of the major (Spy0128) and minor (Spy0125 and Spy0130) pili subunits from Streptococcus pyogenes

Adhesion of the serotype M1 Streptococcus pyogenes strain SF370 to human tonsil explants and cultured keratinocytes requires extended polymeric surface structures called pili. In this important human pathogen, pili are assembled from three protein subunits: Spy0125, Spy0128 and Spy0130 through the action of sortase enzymes. For this study, the structural properties of these pili proteins have been investigated in solution. Spy0125 and Spy0128 display characteristics of globular, folded proteins. Circular dichroism suggests a largely β-sheet composition for Spy0128 and Spy0125; Spy0130 appears to contain little secondary structure. Each of the proteins adopts a monodisperse, monomeric state in solution as assessed by analytical ultracentrifugation. Further, small-angle X-ray scattering curves for Spy0125, Spy0128 and Spy0130 suggest each protein adopts an elongated shape, likely comprised of two domains, with similar maximal dimensions. Based on the scattering data, dummy atom models of each of the pili subunits have been reconstructed ab initio. This study provides the first insights into the structure of Streptococcus pyogenes minor pili subunits, and possible implications for protein function are discussed.     

Pilus backbone protein PitB of Streptococcus pneumoniae contains stabilizing intramolecular isopeptide bonds

Streptococcus pneumoniae type 2 pili are recently identified fimbrial structures extending from the bacterial surface and formed by polymers of the structural protein PitB. Intramolecular isopeptide bonds are a characteristic of the related pilus backbone protein Spy0128 of group A streptococci. Based on the identification of conserved residues in PitB, we predicted two intramolecular isopeptide bonds in PitB. Using a combination of tandem mass spectrometry and Edman sequencing, we show that these bonds were formed between Lys₆₃-Asn₂₁₄ and Lys₂₄₃-Asn₃₇₂ in PitB. Mutant proteins lacking the intramolecular isopeptide bonds retained the proteolytic stability observed with the wild type protein. However, absence of these bonds substantially decreased the melting temperature of the PitB-derivatives, indicating a stabilizing function of these bonds in PitB of the pneumococcal type 2 pilus.     

Intramolecular Isopeptide Bonds Give Thermodynamic and Proteolytic Stability to the Major Pilin Protein of Streptococcus pyogenes

The pili expressed by Streptococcus pyogenes and certain other Gram-positive bacterial pathogens are based on a polymeric backbone in which individual pilin subunits are joined end-to-end by covalent isopeptide bonds through the action of sortase enzymes. The crystal structure of the major pilin of S. pyogenes, Spy0128, revealed that each domain of the two domain protein contained an intramolecular isopeptide bond cross-link joining a Lys side chain to an Asn side chain. In the present work, mutagenesis was used to create mutant proteins that lacked either one isopeptide bond (E117A, N168A, and E258A mutants) or both isopeptide bonds (E117A/E258A). Both the thermal stability and proteolytic stability of Spy0128 were severely compromised by loss of the isopeptide bonds. Unfolding experiments, monitored by circular dichroism, revealed a transition temperature T_m of 85 °C for the wild type protein. In contrast, mutants with only one isopeptide bond showed biphasic unfolding, with the domain lacking an isopeptide bond having a T_m that was ∼30 °C lower than the unaltered domain. High resolution crystal structures of the E117A and N168A mutants showed that the loss of an isopeptide bond did not change the overall pilin structure but caused local disturbance of the protein core that was greater for E117A than for N168A. These effects on stability appear also to be important for pilus assembly.The stability of a globular protein is in general a fine balance between large numbers of weak, noncovalent stabilizing forces (hydrophobic interactions, hydrogen bonds, and ion pairs) and the destabilizing loss of conformational entropy (1). Stability can be greatly enhanced, however, by the presence of a small number of strategically placed covalent bonds, for example those provided by disulfide bonds between Cys residues or by a bound metal ion that bonds to several amino acid side chains. Indeed, some striking examples have been reported in which the introduction of disulfide bonds that link sequentially distant parts of a polypeptide chain can result in large increases in protein stability (2).Our recent discovery of cross-linking isopeptide bonds within the protein subunits of the pili expressed by the Gram-positive organism Streptococcus pyogenes (3) has raised questions as to how these bonds are formed and what they contribute to stability. These pili, which are extremely thin (2–5 nm in diameter) but can extend up to 4 μm from the bacterial cell surface (4), are formed as covalently linked polymers through the action of cysteine transpeptidase enzymes called sortases. In this process, which is common to a number of Gram-positive bacterial pathogens, the pilus backbone is formed from a single protein subunit, the so-called major pilin, by the covalent, end-to-end polymerization of major pilin subunits, generating an assembly resembling beads on a string (5–7). Polymerization requires recognition, by the sortase, of an LPXTG-type sequence motif near the pilin C terminus, cleavage after the Thr residue, and transfer to a specific Lys residue in the next pilin subunit. The resulting amide bond, between the terminal COOH of one subunit and the Lys ϵ-amino group of the next subunit, is referred to as an isopeptide bond.Surprisingly, the three-dimensional structure of Spy0128, the major pilin from the M1 strain of S. pyogenes (group A streptococcus; GAS),² revealed the presence of additional isopeptide bonds as internal cross-links within the protein. These bonds, which were confirmed by mass spectrometry, joined lysine and asparagine side chains (3). One such bond was found within each domain of the two domain protein and, in a similar location, between the first and last strands of the domain (Fig. 1). Isopeptide bonds have until now been recognized for their importance in the intermolecular cross-linking of a variety of proteins, such as in ubiquitination (8), transglutamination (9), and sortase-mediated cell wall anchoring of surface proteins (10), as well as pilus polymerization. In this context, the presence of the intramolecular isopeptide bonds in Spy0128 seemed highly unusual. There has been speculation in the past that such internal bonds could exist, but no mechanism has been put forward, and none has previously been proven to exist.Open in a separate windowFIGURE 1.Overall structure and topology of Spy0128 with internal isopeptide bonds. A, the structure of Spy0128 is shown in ribbon representation with the N terminus (N) and C terminus (C) marked. The isopeptide bond in each of the N and C domains is shown as spheres with residue labels next to them. The residue forming the intersubunit bond, Lys¹⁶¹, is shown in stick mode. The sortase recognition motif, EVPTG, is shown as a dotted line at the C terminus of the structure. B, the topology diagram of Spy0128 is color-coded in rainbow from blue (N terminus) to red (C terminus). The position of Lys¹⁶¹ is indicated by the red arrowhead, and the positions of the isopeptide bonds are indicated by black bars. C, the N domain isopeptide bond of Spy0128 between Lys³⁶ and Asn¹⁶⁸ and the catalytic residue Glu¹¹⁷ are shown in ball-and-stick mode.The locations of the two internal Lys-Asn isopeptide bonds in Spy0128 immediately suggested that they are self-generated, each being the result of an intramolecular reaction. Mutagenesis showed that bond formation was in each case dependent on an adjacent Glu residue, Glu¹¹⁷ in the N-terminal domain and Glu²⁵⁸ in the C-terminal domain; mutation of either of these Glu residues to Ala abrogated the formation of the associated isopeptide bond (3). A close parallel exists in the self-generated Lys-Asn isopeptide bonds that form during maturation of the protein coat of the bacteriophage HK97, where a nearby Glu residue is essential for the reaction, and the capsid subunits become covalently linked to form interlocked circular rings referred to as chain mail (11, 12).Further investigations have shown that similar isopeptide bonds can be found as internal cross-links in other proteins. Examination of previously determined structures of a minor pilin GBS52 from Streptococcus agalactiae (13) and the CnaA and CnaB domains of a collagen-binding adhesin from Staphylococcus aureus (14–16) revealed constellations of Lys-Asn-Glu/Asp residues similar to those that form the internal cross-links in Spy0128, and examination of the electron density confirmed their probable presence in those cases where the x-ray data were available (3). Sequence comparisons showed that similar domains, with corresponding Lys-Asn-Glu/Asp residues, are present in many cell surface proteins of Gram-positive bacteria. Recently the Bacillus cereus major pilin BcpA was shown, by mass spectral analyses, to contain internal isopeptide bonds similar to those in Spy0128 (7), and sequence comparisons point to similar bonds in the major pilins of other species. These data suggest that isopeptide bond cross-links could be important features in many surface proteins involved in adhesive functions, where stability against physical and chemical stresses is important.Here we describe the preparation of mutants of Spy0128 that lack one or both of the internal isopeptide bonds, using mass spectrometry to confirm their absence. We show by x-ray crystallography that the overall structure of Spy0128 is not significantly affected by the loss of an isopeptide bond. We also show, however, that the proteolytic and thermal stability of Spy0128 is severely compromised when the internal isopeptide bonds are removed and thereby establish their important stabilizing role in proteins of this type.     

Structural Model for Covalent Adhesion of the Streptococcus pyogenes Pilus through a Thioester Bond

The human pathogen Streptococcus pyogenes produces pili that are essential for adhesion to host surface receptors. Cpa, the adhesin at the pilus tip, was recently shown to have a thioester-containing domain. The thioester bond is believed to be important in adhesion, implying a mechanism of covalent attachment analogous to that used by human complement factors. Here, we have characterized a second active thioester-containing domain on Cpa, the N-terminal domain of Cpa (CpaN). Expression of CpaN in Escherichia coli gave covalently linked dimers. These were shown by x-ray crystallography and mass spectrometry to comprise two CpaN molecules cross-linked by the polyamine spermidine following reaction with the thioester bonds. This cross-linked CpaN dimer provides a model for the covalent attachment of Cpa to target receptors and thus the streptococcal pilus to host cells. Similar thioester domains were identified in cell wall proteins of other Gram-positive pathogens, suggesting that thioester domains are more widely used and provide a mechanism of adhesion by covalent bonding to target molecules on host cells that mimics that used by the human complement system to eliminate pathogens.     

Intramolecular isopeptide bonds: protein crosslinks built for stress?

The recent discovery of intramolecular isopeptide bonds formed between lysine and asparagine residues in certain bacterial cell-surface proteins represents a new component in nature's toolbox for stabilising proteins. Although isopeptide bonds are well known as intermolecular crosslinks in processes such as ubiquitylation, these intramolecular isopeptide bonds form autocatalytically during protein folding, as the reacting groups are brought together in a hydrophobic environment. First identified in the Ig-like pilin subunits of Gram-positive bacterial pili, these internal crosslinks provide stabilisation against chemical, thermal and mechanical stress and provide new opportunities for applications in biotechnology. The crucial role of structural biology and mass spectrometry in their discovery and characterisation raises the likelihood that further novel post-translational modifications resulting from intramolecular reactions in proteins await discovery.     

Structure and assembly of Gram-positive bacterial pili: unique covalent polymers

Bacterial pili are long, multi-subunit protein assemblies that extend from bacterial surfaces, mediating adhesion and colonisation. The recently characterised pili expressed by Gram-positive pathogens represent a novel variation; completely covalent polymers in which sortase-mediated isopeptide bonds link successive pilin subunits. Recent structural studies of the component pilins have revealed a common pattern of tandem immunoglobulin (Ig)-like domains, joined end-on-end. This long thin assembly is further stabilised by autocatalytically generated isopeptide bond crosslinks within the domains, joining Lys and Asn(or Asp) side chains. Specialised subunits at the tip and the base complete the assembly, with the tip pilins presenting novel adhesive structures.     

Roles of Minor Pilin Subunits Spy0125 and Spy0130 in the Serotype M1 Streptococcus pyogenes Strain SF370

Adhesive pili on the surface of the serotype M1 Streptococcus pyogenes strain SF370 are composed of a major backbone subunit (Spy0128) and two minor subunits (Spy0125 and Spy0130), joined covalently by a pilin polymerase (Spy0129). Previous studies using recombinant proteins showed that both minor subunits bind to human pharyngeal (Detroit) cells (A. G. Manetti et al., Mol. Microbiol. 64:968-983, 2007), suggesting both may act as pilus-presented adhesins. While confirming these binding properties, studies described here indicate that Spy0125 is the pilus-presented adhesin and that Spy0130 has a distinct role as a wall linker. Pili were localized predominantly to cell wall fractions of the wild-type S. pyogenes parent strain and a spy0125 deletion mutant. In contrast, they were found almost exclusively in culture supernatants in both spy0130 and srtA deletion mutants, indicating that the housekeeping sortase (SrtA) attaches pili to the cell wall by using Spy0130 as a linker protein. Adhesion assays with antisera specific for individual subunits showed that only anti-rSpy0125 serum inhibited adhesion of wild-type S. pyogenes to human keratinocytes and tonsil epithelium to a significant extent. Spy0125 was localized to the tip of pili, based on a combination of mutant analysis and liquid chromatography-tandem mass spectrometry analysis of purified pili. Assays comparing parent and mutant strains confirmed its role as the adhesin. Unexpectedly, apparent spontaneous cleavage of a labile, proline-rich (8 of 14 residues) sequence separating the N-terminal ∼1/3 and C-terminal ∼2/3 of Spy0125 leads to loss of the N-terminal region, but analysis of internal spy0125 deletion mutants confirmed that this has no significant effect on adhesion.The group A Streptococcus (S. pyogenes) is an exclusively human pathogen that commonly colonizes either the pharynx or skin, where local spread can give rise to various inflammatory conditions such as pharyngitis, tonsillitis, sinusitis, or erysipelas. Although often mild and self-limiting, GAS infections are occasionally very severe and sometimes lead to life-threatening diseases, such as necrotizing fasciitis or streptococcal toxic shock syndrome. A wide variety of cell surface components and extracellular products have been shown or suggested to play important roles in S. pyogenes virulence, including cell surface pili (1, 6, 32). Pili expressed by the serotype M1 S. pyogenes strain SF370 mediate specific adhesion to intact human tonsil epithelia and to primary human keratinocytes, as well as cultured keratinocyte-derived HaCaT cells, but not to Hep-2 or A549 cells (1). They also contribute to adhesion to a human pharyngeal cell line (Detroit cells) and to biofilm formation (29).Over the past 5 years, pili have been discovered on an increasing number of important Gram-positive bacterial pathogens, including Bacillus cereus (4), Bacillus anthracis (4, 5), Corynebacterium diphtheriae (13, 14, 19, 26, 27, 44, 46, 47), Streptococcus agalactiae (7, 23, 38), and Streptococcus pneumoniae (2, 3, 24, 25, 34), as well as S. pyogenes (1, 29, 32). All these species produce pili that are composed of a single major subunit plus either one or two minor subunits. During assembly, the individual subunits are covalently linked to each other via intermolecular isopeptide bonds, catalyzed by specialized membrane-associated transpeptidases that may be described as pilin polymerases (4, 7, 25, 41, 44, 46). These are related to the classical housekeeping sortase (usually, but not always, designated SrtA) that is responsible for anchoring many proteins to Gram-positive bacterial cell walls (30, 31, 33). The C-terminal ends of sortase target proteins include a cell wall sorting (CWS) motif consisting, in most cases, of Leu-Pro-X-Thr-Gly (LPXTG, where X can be any amino acid) (11, 40). Sortases cleave this substrate between the Thr and Gly residues and produce an intermolecular isopeptide bond linking the Thr to a free amino group provided by a specific target. In attaching proteins to the cell wall, the target amino group is provided by the lipid II peptidoglycan precursor (30, 36, 40). In joining pilus subunits, the target is the ɛ-amino group in the side chain of a specific Lys residue in the second subunit (14, 18, 19). Current models of pilus biogenesis envisage repeated transpeptidation reactions adding additional subunits to the base of the growing pilus, until the terminal subunit is eventually linked covalently via an intermolecular isopeptide bond to the cell wall (28, 41, 45).The major subunit (sometimes called the backbone or shaft subunit) extends along the length of the pilus and appears to play a structural role, while minor subunits have been detected either at the tip, the base, and/or at occasional intervals along the shaft, depending on the species (4, 23, 24, 32, 47). In S. pneumoniae and S. agalactiae one of the minor subunits acts as an adhesin, while the second appears to act as a linker between the base of the assembled pilus and the cell wall (7, 15, 22, 34, 35). It was originally suggested that both minor subunits of C. diphtheriae pili could act as adhesins (27). However, recent data showed one of these has a wall linker role (26, 44) and may therefore not function as an adhesin.S. pyogenes strain SF370 pili are composed of a major (backbone) subunit, termed Spy0128, plus two minor subunits, called Spy0125 and Spy0130 (1, 32). All three are required for efficient adhesion to target cells (1). Studies employing purified recombinant proteins have shown that both of the minor subunits, but not the major subunit, bind to Detroit cells (29), suggesting both might act as pilus-presented adhesins. Here we report studies employing a combination of recombinant proteins, specific antisera, and allelic replacement mutants which show that only Spy0125 is the pilus-presented adhesin and that Spy0130 has a distinct role in linking pili to the cell wall.     

Structure of the full-length major pilin from Streptococcus pneumoniae: implications for isopeptide bond formation in gram-positive bacterial pili

The surface of the pneumococcal cell is adorned with virulence factors including pili. The major pilin RrgB, which forms the pilus shaft on pathogenic Streptococcus pneumoniae, comprises four immunoglobulin (Ig)-like domains, each with a common CnaB topology. The three C-terminal domains are each stabilized by internal Lys-Asn isopeptide bonds, formed autocatalytically with the aid of an essential Glu residue. The structure and orientation of the crucial N-terminal domain, which provides the covalent linkage to the next pilin subunit in the shaft, however, remain incompletely characterised. We report the crystal structure of full length RrgB, solved by X-ray crystallography at 2.8 Å resolution. The N-terminal (D1) domain makes few contacts with the rest of the RrgB structure, and has higher B-factors. This may explain why D1 is readily lost by proteolysis, as are the N-terminal domains of many major pilins. D1 is also found to have a triad of Lys, Asn and Glu residues in the same topological positions as in the other domains, yet mass spectrometry and the crystal structure show that no internal isopeptide bond is formed. We show that this is because β-strand G of D1, which carries the Asn residue, diverges from β-strand A, carrying the Lys residue, such that these residues are too far apart for bond formation. Strand G also carries the YPKN motif that provides the essential Lys residue for the sortase-mediated intermolecular linkages along the pilus shaft. Interaction with the sortase and formation of the intermolecular linkage could result in a change in the orientation of this strand, explaining why isopeptide bond formation in the N-terminal domains of some major pilins appears to take place only upon assembly of the pili.     

Structural and functional characterization of the Streptococcus pneumoniae RrgB pilus backbone D1 domain

Streptococcus pneumoniae expresses on its surface adhesive pili, involved in bacterial attachment to epithelial cells and virulence. The pneumococcal pilus is composed of three proteins, RrgA, RrgB, and RrgC, each stabilized by intramolecular isopeptide bonds and covalently polymerized by means of intermolecular isopeptide bonds to form an extended fiber. RrgB is the pilus scaffold subunit and is protective in vivo in mouse models of sepsis and pneumonia, thus representing a potential vaccine candidate. The crystal structure of a major RrgB C-terminal portion featured an organization into three independently folded protein domains (D2-D4), whereas the N-terminal D1 domain (D1) remained unsolved. We have tested the four single recombinant RrgB domains in active and passive immunization studies and show that D1 is the most effective, providing a level of protection comparable with that of the full-length protein. To elucidate the structural features of D1, we solved the solution structure of the recombinant domain by NMR spectroscopy. The spectra analysis revealed that D1 has many flexible regions, does not contain any intramolecular isopeptide bond, and shares with the other domains an Ig-like fold. In addition, we demonstrated, by site-directed mutagenesis and complementation in S. pneumoniae, that the D1 domain contains the Lys residue (Lys-183) involved in the formation of the intermolecular isopeptide bonds and pilus polymerization. Finally, we present a model of the RrgB protein architecture along with the mapping of two surface-exposed linear epitopes recognized by protective antisera.     

Isopeptide bonds of the major pilin protein BcpA influence pilus structure and bundle formation on the surface of Bacillus cereus

Bacillus cereus strains elaborate pili on their surface using a mechanism of sortase-mediated cross-linking of major and minor pilus components. Here we used a combination of electron microscopy and atomic force microscopy to visualize these structures. Pili occur as single, double or higher order assemblies of filaments formed from monomers of the major pilin, BcpA, capped by the minor pilin, BcpB. Previous studies demonstrated that within assembled pili, four domains of BcpA - CNA(1), CNA(2), XNA and CNA(3) - each acquire intramolecular lysine-asparagine isopeptide bonds formed via catalytic glutamic acid or aspartic acid residues. Here we showed that mutants unable to form the intramolecular isopeptide bonds in the CNA(2) or CNA(3) domains retain the ability to form pilus bundles. A mutant lacking the CNA(1) isopeptide bond assembled deformed pilin subunits that failed to associate as bundles. X-ray crystallography revealed that the BcpA variant Asp(312) Ala, lacking an aspartyl catalyst, did not generate the isopeptide bond within the jelly-roll structure of XNA. The Asp(312) Ala mutant was also unable to form bundles and promoted the assembly of deformed pili. Thus, structural integrity of the CNA(1) and XNA domains are determinants for the association of pili into higher order bundle structures and determine native pilus structure.     

The Pilin Protein FimP from Actinomyces oris: Crystal Structure and Sequence Analyses

The Actinomyces oris type-1 pili are important for the initial formation of dental plaque by binding to salivary proteins that adhere to the tooth surface. Here we present the X-ray structure of FimP, the protein that is polymerized into the type-1 pilus stalk, assisted by a pili-specific sortase. FimP consists of three tandem IgG-like domains. The middle and C-terminal domains contain one autocatalyzed intramolecular isopeptide bond each, a feature used by Gram-positive bacteria for stabilization of surface proteins. While the N-terminal domain harbours all the residues necessary for forming an isopeptide bond, no such bond is observed in the crystal structure of this unpolymerized form of FimP. The monomer is further stabilized by one disulfide bond each in the N- and C-terminal domains as well as by a metal-coordinated loop protruding from the C-terminal domain. A lysine, predicted to be crucial for FimP polymerization by covalent attachment to a threonine from another subunit, is located at the rim of a groove lined with conserved residues. The groove may function as a docking site for the sortase-FimP complex. We also present sequence analyses performed on the genes encoding FimP as well as the related FimA, obtained from clinical isolates.     

Isopeptide bond in collagen- and fibrinogen-binding MSCRAMMs

The internal isopeptide bonds are amide bonds formed autocatalytically between the side chains of Lys and Asn/Asp residues and have been discovered recently. These bonds are well conserved in Gram-positive bacterial pilin proteins and are also observed over a wide range of Gram-positive bacterial surface proteins. The presence of these bonds confers the pilus subunits with remarkable properties in terms of thermal stability and resistance to proteases. Like pili, microbial surface components recognizing adhesive matrix molecules (MSCRAMMs) are also surface proteins found only in Gram-positive bacteria. They specifically interact with the extracellular matrix (ECM) molecules like collagen, fibrinogen, fibronectin, laminin, etc. Many biophysical and biochemical studies have been carried out to characterize the isopeptide bonds in pili proteins from Gram-positive bacteria, but no attempts have been made to study the isopeptide bonds in MSCRAMMs. This short review aims to study the significance of the isopeptide bonds in relation to their function, by analyzing the crystal structures of collagen- and fibrinogen-binding MSCRAMMs. In this analysis, interestingly, we observed that the putative isopeptide bonds are restricted to the collagen-binding MSCRAMMs. Based on analogy with bacterial pilus subunits, we hypothesize that the collagen-binding MSCRAMMs possessing putative isopeptide bonds exhibit similar structural properties, which could help the bacteria in colonizing the host and provide resistance against host–defense mechanisms.     

Structural Analysis and Optimization of the Covalent Association between SpyCatcher and a Peptide Tag

Peptide tagging is a key strategy for observing and isolating proteins. However, the interactions of proteins with peptides are nearly all rapidly reversible. Proteins tagged with the peptide SpyTag form an irreversible covalent bond to the SpyCatcher protein via a spontaneous isopeptide linkage, thereby offering a genetically encoded way to create peptide interactions that resist force and harsh conditions. Here, we determined the crystal structure of the reconstituted covalent complex of SpyTag and SpyCatcher at 2.1 Å resolution. The structure showed the expected reformation of the β-sandwich domain seen in the parental streptococcal adhesin, but flanking sequences at both N- and C-termini of SpyCatcher were disordered. In addition, only 10 out of 13 amino acids of the SpyTag peptide were observed to interact with SpyCatcher, pointing to specific contacts important for rapid split protein reconstitution. Based on these structural insights, we expressed a range of SpyCatcher variants and identified a minimized SpyCatcher, 32 residues shorter, that maintained rapid reaction with SpyTag. Together, these results give insight into split protein β-strand complementation and enhance a distinct approach to ultrastable molecular interaction.     

Crystal structure of Spy0129, a Streptococcus pyogenes class B sortase involved in pilus assembly

Sortase enzymes are cysteine transpeptidases that mediate the covalent attachment of substrate proteins to the cell walls of Gram-positive bacteria, and thereby play a crucial role in virulence, infection and colonisation by pathogens. Many cell-surface proteins are anchored by the housekeeping sortase SrtA but other more specialised sortases exist that attach sub-sets of proteins or function in pilus assembly. The sortase Spy0129, or SrtC1, from the M1 SF370 strain of Streptococcus pyogenes is responsible for generating the covalent linkages between the pilin subunits in the pili of this organism. The crystal structure of Spy0129 has been determined at 2.3 Å resolution (R = 20.4%, Rfree  = 26.0%). The structure shows that Spy0129 is a class B sortase, in contrast to other characterised pilin polymerases, which belong to class C. Spy0129 lacks a flap believed to function in substrate recognition in class C enzymes and instead has an elaborated β6/β7 loop. The two independent Spy0129 molecules in the crystal show differences in the positions and orientations of the catalytic Cys and His residues, Cys221 and His126, correlated with movements of the β7/β8 and β4/β5 loops that respectively follow these residues. Bound zinc ions stabilise these alternative conformations in the crystal. This conformational variability is likely to be important for function although there is no evidence that zinc is involved in vivo.     

Structure and Assembly of Group B Streptococcus Pilus 2b Backbone Protein

Group B Streptococcus (GBS) is a major cause of invasive disease in infants. Like other Gram-positive bacteria, GBS uses a sortase C-catalyzed transpeptidation mechanism to generate cell surface pili from backbone and ancillary pilin precursor substrates. The three pilus types identified in GBS contain structural subunits that are highly immunogenic and are promising candidates for the development of a broadly-protective vaccine. Here we report the X-ray crystal structure of the backbone protein of pilus 2b (BP-2b) at 1.06Å resolution. The structure reveals a classical IgG-like fold typical of the pilin subunits of other Gram-positive bacteria. The crystallized portion of the protein (residues 185-468) encompasses domains D2 and D3 that together confer high stability to the protein due to the presence of an internal isopeptide bond within each domain. The D2+D3 region, lacking the N-terminal D1 domain, was as potent as the entire protein in conferring protection against GBS challenge in a well-established mouse model. By site-directed mutagenesis and complementation studies in GBS knock-out strains we identified the residues and motives essential for assembly of the BP-2b monomers into high-molecular weight complexes, thus providing new insights into pilus 2b polymerization.     

Free‐energy function based on an all‐atom model for proteins

We have developed a free‐energy function based on an all‐atom model for proteins. It comprises two components, the hydration entropy (HE) and the total dehydration penalty (TDP). Upon a transition to a more compact structure, the number of accessible configurations arising from the translational displacement of water molecules in the system increases, leading to a water‐entropy gain. To fully account for this effect, the HE is calculated using a statistical‐mechanical theory applied to a molecular model for water. The TDP corresponds to the sum of the hydration energy and the protein intramolecular energy when a fully extended structure, which possesses the maximum number of hydrogen bonds with water molecules and no intramolecular hydrogen bonds, is chosen as the standard one. When a donor and an acceptor (e.g., N and O, respectively) are buried in the interior after the break of hydrogen bonds with water molecules, if they form an intramolecular hydrogen bond, no penalty is imposed. When a donor or an acceptor is buried with no intramolecular hydrogen bond formed, an energetic penalty is imposed. We examine all the donors and acceptors for backbone‐backbone, backbone‐side chain, and side chain‐side chain intramolecular hydrogen bonds and calculate the TDP. Our free‐energy function has been tested for three different decoy sets. It is better than any other physics‐based or knowledge‐based potential function in terms of the accuracy in discriminating the native fold from misfolded decoys and the achievement of high Z‐scores. Proteins 2009. © 2009 Wiley‐Liss, Inc.     

Architects at the bacterial surface - sortases and the assembly of pili with isopeptide bonds

The cell wall envelope of Gram-positive bacteria can be thought of as a surface organelle for the assembly of macromolecular structures that enable the unique lifestyle of each microorganism. Sortases - enzymes that cleave the sorting signals of secreted proteins to form isopeptide (amide) bonds between the secreted proteins and peptidoglycan or polypeptides - function as the principal architects of the bacterial surface. Acting alone or with other sortase enzymes, sortase construction leads to the anchoring of surface proteins at specific sites in the envelope or to the assembly of pili, which are fibrous structures formed from many protein subunits. The catalysis of intermolecular isopeptide bonds between pilin subunits is intertwined with the assembly of intramolecular isopeptide bonds within pilin subunits. Together, these isopeptide bonds endow these sortase products with adhesive properties and resistance to host proteases.     

Molecular characterization of covalent complexes between tissue transglutaminase and gliadin peptides

Tissue transglutaminase (TG2) modifies proteins and peptides by transamidation or deamidation of specific glutamine residues. TG2 also has a central role in the pathogenesis of celiac disease. The enzyme is both the target of disease-specific autoantibodies and generates deamidated gliadin peptides recognized by intestinal T cells from patients. Incubation of TG2 with gliadin peptides also results in the formation of covalent TG2-peptide complexes. Here we report the characterization of complexes between TG2 and two immunodominant gliadin peptides. Two types of covalent complexes were found; the peptides are either linked via a thioester bond to the active site cysteine of TG2 or via isopeptide bonds to particular lysine residues of the enzyme. We quantified the number of gliadin peptides bound to TG2 under different conditions. After 30 min of incubation of TG2 at 1 microm with an equimolar ratio of peptides to TG2, approximately equal amounts of peptides were bound by thioester and isopeptide linkage. At higher peptide to TG2 ratios, more than one peptide was linked to TG2, and isopeptide bond formation dominated. The lysine residues in TG2 that act as acyl acceptors were identified by matrix assisted laser desorption ionization and nanoelectrospray mass spectrometry and tandem mass spectrometry analysis of proteolytic digests of the TG2-peptide complexes. At a high molar excess of gliadin peptides to TG2 altogether six lysine residues of TG2 were found to participate in isopeptide bond formation. The results are relevant to the understanding of how antibodies to TG2 are formed in celiac disease.     

The ancillary protein 1 of Streptococcus pyogenes FCT-1 pili mediates cell adhesion and biofilm formation through heterophilic as well as homophilic interactions

Gram‐positive pili are known to play a role in bacterial adhesion to epithelial cells and in the formation of biofilm microbial communities. In the present study we undertook the functional characterization of the pilus ancillary protein 1 (AP1_M6) from Streptococcus pyogenes isolates expressing the FCT‐1 pilus variant, known to be strong biofilm formers. Cell binding and biofilm formation assays using S. pyogenes in‐frame deletion mutants, Lactococcus expressing heterologous FCT‐1 pili and purified recombinant AP1_M6, indicated that this pilin is a strong cell adhesin that is also involved in bacterial biofilm formation. Moreover, we show that AP1_M6 establishes homophilic interactions that mediate inter‐bacterial contact, possibly promoting bacterial colonization of target epithelial cells in the form of three‐dimensional microcolonies. Finally, AP1_M6 knockout mutants were less virulent in mice, indicating that this protein is also implicated in GAS systemic infection.