Computational design of high-affinity epitope scaffolds by backbone grafting of a linear epitope

Computational grafting of functional motifs onto scaffold proteins is a promising way to engineer novel proteins with pre-specified functionalities. Typically, protein grafting involves the transplantation of protein side chains from a functional motif onto structurally homologous regions of scaffold proteins. Using this approach, we previously transplanted the human immunodeficiency virus 2F5 and 4E10 epitopes onto heterologous proteins to design novel "epitope-scaffold" antigens. However, side-chain grafting is limited by the availability of scaffolds with compatible backbone for a given epitope structure and offers no route to modify backbone structure to improve mimicry or binding affinity. To address this, we report here a new and more aggressive computational method-backbone grafting of linear motifs-that transplants the backbone and side chains of linear functional motifs onto scaffold proteins. To test this method, we first used side-chain grafting to design new 2F5 epitope scaffolds with improved biophysical characteristics. We then independently transplanted the 2F5 epitope onto three of the same parent scaffolds using the newly developed backbone grafting procedure. Crystal structures of side-chain and backbone grafting designs showed close agreement with both the computational models and the desired epitope structure. In two cases, backbone grafting scaffolds bound antibody 2F5 with 30- and 9-fold higher affinity than corresponding side-chain grafting designs. These results demonstrate that flexible backbone methods for epitope grafting can significantly improve binding affinities over those achieved by fixed backbone methods alone. Backbone grafting of linear motifs is a general method to transplant functional motifs when backbone remodeling of the target scaffold is necessary.     

Heterologous epitope-scaffold prime:boosting immuno-focuses B cell responses to the HIV-1 gp41 2F5 neutralization determinant

The HIV-1 envelope glycoproteins (Env) gp120 and gp41 mediate entry and are the targets for neutralizing antibodies. Within gp41, a continuous epitope defined by the broadly neutralizing antibody 2F5, is one of the few conserved sites accessible to antibodies on the functional HIV Env spike. Recently, as an initial attempt at structure-guided design, we transplanted the 2F5 epitope onto several non-HIV acceptor scaffold proteins that we termed epitope scaffolds (ES). As immunogens, these ES proteins elicited antibodies with exquisite binding specificity matching that of the 2F5 antibody. These novel 2F5 epitope scaffolds presented us with the opportunity to test heterologous prime:boost immunization strategies to selectively boost antibody responses against the engrafted gp41 2F5 epitope. Such strategies might be employed to target conserved but poorly immunogenic sites on the HIV-1 Env, and, more generally, other structurally defined pathogen targets. Here, we assessed ES prime:boosting by measuring epitope specific serum antibody titers by ELISA and B cell responses by ELISpot analysis using both free 2F5 peptide and an unrelated ES protein as probes. We found that the heterologous ES prime:boosting immunization regimen elicits cross-reactive humoral responses to the structurally constrained 2F5 epitope target, and that incorporating a promiscuous T cell helper epitope in the immunogens resulted in higher antibody titers against the 2F5 graft, but did not result in virus neutralization. Interestingly, two epitope scaffolds (ES1 and ES2), which did not elicit a detectable 2F5 epitope-specific response on their own, boosted such responses when primed with the ES5. Together, these results indicate that heterologous ES prime:boost immunization regimens effectively focus the humoral immune response on the structurally defined and immunogen-conserved HIV-1 2F5 epitope.     

Highly efficient selection of epitope specific antibody through competitive yeast display library sorting

Combinatory antibody library display technologies have been invented and successfully implemented for the selection and engineering of therapeutic antibodies. Precise targeting of important epitopes on the protein of interest is essential for such isolated antibodies to serve as effective modulators of molecular interactions. We developed a strategy to efficiently isolate antibodies against a specific epitope on a target protein from a yeast display antibody library using dengue virus envelope protein domain III as a model target. A domain III mutant protein with a key mutation inside a cross-reactive neutralizing epitope was designed, expressed, and used in the competitive panning of a yeast display naïve antibody library. All the yeast display antibodies that bound to the wild type domain III but not to the mutant were selectively sorted and characterized. Two unique clones were identified and showed cross-reactive binding to envelope protein domain IIIs from different serotypes. Epitope mapping of one of the antibodies confirmed that its epitope overlapped with the intended neutralizing epitope. This novel approach has implications for many areas of research where the isolation of epitope-specific antibodies is desired, such as selecting antibodies against conserved epitope(s) of viral envelope proteins from a library containing high titer, high affinity non-neutralizing antibodies, and targeting unique epitopes on cancer-related proteins.     

一种蛋白质B细胞表位展示系统的构建及验证

目的:建立一种能够有效展示蛋白质B细胞表位的载体系统,以用于表位特异性抗体的制备和表位疫苗的设计。方法:选用抗体的可变区作为蛋白质B细胞表位展示的骨架蛋白,B细胞表位的展示部位为CDR3区。全基因合成骨架蛋白基因,通过重叠PCR将B细胞表位编码序列插入到骨架蛋白基因中,原核表达目的蛋白,利用Sephacryl S-100层析柱进行蛋白纯化,用纯化的蛋白按常规方法免疫小鼠,采用ELISA法检测免疫血清的滴度及特异性,通过Western blot和间接免疫荧光技术进一步验证免疫血清对目的蛋白的识别。结果:成功构建了3种表位展示蛋白,均表现出了很好的抗原性,表位展示蛋白免疫血清具有较好的特异性,能够特异识别所展示的B细胞表位。结论:抗体可变区作为骨架蛋白能够很好地展示B细胞表位,免疫小鼠后获得的免疫血清表现出了较好的特异性。     

Effect of epitope position on neutralization by anti-human immunodeficiency virus monoclonal antibody 2F5

The membrane-proximal region of the human immunodeficiency virus type 1 (HIV-1) transmembrane protein (TM) is critical for envelope (Env)-mediated membrane fusion and contains the target for broadly reactive neutralizing antibody 2F5. It has been proposed that 2F5 neutralization might involve interaction of its long, hydrophobic, complementarity-determining region (CDR) H3, with adjacent viral membrane. Using Moloney murine leukemia virus (MLV) as a tool, we examined the effect of epitope position on 2F5 neutralization. When the 2F5 epitope was inserted in the proline-rich region of MLV Env surface protein (SU), 2F5 blocked cell fusion and virus infection, whereas MLV with a hemagglutinin (HA) epitope at the same position was not neutralized by anti-HA, even though the antibodies bound their respective Envs on the surface of infected cells and viruses equally well. When the 2F5 epitope was inserted in the MLV Env TM at a position comparable to its natural position in HIV-1 TM, 2F5 antibody blocked Env-mediated cell fusion. Epitope position had subtle effects on neutralization by 2F5: the antibody concentration for 50% inhibition of cell fusion was more than 10-fold lower when the 2F5 epitope was in SU than in TM, and inhibition was less complete at high concentrations of antibody; we discuss possible explanations for these effects of epitope position. Since membrane proximity was not required for neutralization by 2F5 antibody, we speculate that the CDR H3 of 2F5 contributes to neutralization by destabilizing an adjacent protein rather than by inserting into an adjacent membrane.     

Evaluation of the potency of the anti-idiotypic antibody Ab2/3H6 mimicking gp41 as an HIV-1 vaccine in a rabbit prime/boost study

The HIV-1 envelope protein harbors several conserved epitopes that are recognized by broadly neutralizing antibodies. One of these neutralizing sites, the MPER region of gp41, is targeted by one of the most potent and broadly neutralizing monoclonal antibody, 2F5. Different vaccination strategies and a lot of efforts have been undertaken to induce MPER neutralizing antibodies but little success has been achieved so far. We tried to consider the alternative anti-idiotypic vaccination approach for induction of 2F5-like antibodies. The previously developed and characterized anti-idiotypic antibody Ab2/3H6 was expressed as antibody fragment fusion protein with C-terminally attached immune-modulators and used for immunization of rabbits to induce antibodies specific for HIV-1. Only those rabbits immunized with immunogens fused with the immune-modulators developed HIV-1 specific antibodies. Anti-anti-idiotypic antibodies were affinity purified using a two-step affinity purification protocol which revealed that only little amount of the total rabbit IgG fraction contained HIV-1 specific antibodies. The characterization of the induced anti-anti-idiotypic antibodies showed specificity for the linear epitope of 2F5 GGGELDKWASL and the HIV-1 envelope protein gp140. Despite specificity for the linear epitope and the truncated HIV-1 envelope protein these antibodies were not able to exhibit virus neutralization activities. These results suggest that Ab2/3H6 alone might not be suitable as a vaccine.     

Quantitative specificity‐based display library screening identifies determinants of antibody‐epitope binding specificity

Despite the critical importance of molecular specificity in bimolecular systems, in vitro display technologies have been applied extensively for affinity maturation of peptides and antibodies without explicitly measuring the specificity of the desired interaction. We devised a general strategy to measure, screen, and evolve specificity of protein ligand interactions analogous to widely used affinity maturation strategies. The specificity of binding to target and nontarget antibodies labeled with spectrally distinct fluorophores was measured simultaneously in protein mixtures via multiparameter flow cytometry, thereby enabling screening for high target antibody specificity. Isolated antibody specific ligands exhibited varying specificity, revealing critical amino acid determinants for target recognition and nontarget avoidance in complex mixtures. Molecular specificity in the mixture was further enhanced by quantitative directed evolution, yielding a family of epitopes exhibiting improved specificities equivalent, or superior to, the native peptide antigen to which the antibody was raised. Specificity screening simultaneously favored affinity, yielding ligands with three‐fold improved affinity relative to the parent epitope. Quantitative specificity screening will be useful to screen, evolve, and characterize the specificity of protein and peptide interactions for molecular recognition applications.     

Computational protein design using flexible backbone remodeling and resurfacing: case studies in structure-based antigen design

Computational protein design has promise for vaccine design and other applications. We previously transplanted the HIV 4E10 epitope onto non-HIV protein scaffolds for structural stabilization and immune presentation. Here, we developed two methods to optimize the structure of an antigen, flexible backbone remodeling and resurfacing, and we applied these methods to a 4E10 scaffold. In flexible-backbone remodeling, an existing backbone segment is replaced by a de novo designed segment of prespecified length and secondary structure. With remodeling, we replaced a potentially immunodominant domain on the scaffold with a helix-loop segment that made intimate contact to the protein core. All three domain trim designs tested experimentally had improved thermal stability and similar binding affinity for the 4E10 antibody compared to the parent scaffold. A crystal structure of one design had a 0.8 Å backbone RMSD to the computational model in the rebuilt region. Comparison of parent and trimmed scaffold reactivity to anti-parent sera confirmed the deletion of an immunodominant domain. In resurfacing, the surface of an antigen outside a target epitope is redesigned to obtain variants that maintain only the target epitope. Resurfaced variants of two scaffolds were designed in which 50 positions amounting to 40% of the protein sequences were mutated. Surface-patch analyses indicated that most potential antibody footprints outside the 4E10 epitope were altered. The resurfaced variants maintained thermal stability and binding affinity. These results indicate that flexible-backbone remodeling and resurfacing are useful tools for antigen optimization and protein engineering generally.     

Generation and epitope analysis of thyroid stimulating hormone-specific monoclonal antibodies for enzyme immunoassays

By using an improved hybridoma technique with a semisolid medium of methylcellulose for initial cloning, numerous high affinity monoclonal antibodies against human thyroid stimulating hormone (TSH) were generated. These antibodies were characterized with respect to their subunit and epitope specificity. Epitope analysis of antibodies specific to the beta-subunit of TSH was performed by a sandwich pairing procedure. Based on the results of this analysis, it was concluded that there are four distinct TSH-specific epitopes on the beta-subunit of TSH; these are designated a, b, c, and ab. The five antibodies binding to epitopes a, b, and c are not mutually exclusive. However, the antibody binding to epitope ab prevents further binding of other antibodies to epitope a or b, but not to epitope c. This epitope analysis enabled us to combine three high affinity monoclonal antibodies, each of which reacts with epitopes a, b, and c, respectively, in a typical sandwich enzyme immunoassay. One was immobilized on polystyrene beads and the other two were conjugated with horseradish peroxidase and served as the second antibodies. This enzyme immunoassay can be performed within 90 min and with a minimum sensitivity of 0.2-0.3 microIU/ml.     

Identification of B cell epitopes of dengue virus 2 NS3 protein by monoclonal antibody

Dengue virus is a major international public health concern, and there is a lack of available effective vaccines. Virus-specific epitopes could help in developing epitope peptide vaccine. Previously, a neutralizing monoclonal antibody (mAb) 4F5 against nonstructural protein 3 (NS3) of dengue virus 2 (DV2) was developed in our lab. In this work, the B cell epitope recognized by mAb 4F5 was identified using the phage-displayed peptide library. The results of the binding assay and competitive inhibition assay indicated that the peptides, residues 460–469 (U460-469 RVGRNPKNEN) of DV2 NS3 protein, were the B cell epitopes recognized by mAb 4F5. Furthermore, the epitope peptides and a control peptide were synthesized and then immunized female BALB/c mice. ELISA analysis showed that immunization with synthesized epitope peptide elicited a high level of antibody in mice, and immunofluorescent staining showed that the antisera from fusion epitope-immunized mice also responded to DV2 NS3 protein, which further characterized the specific response of the present epitope peptide. Therefore, the present work revealed the specificity of the newly identified epitope (U460-469) of DV2 NS3 protein, which may shed light on dengue virus (DV) vaccine design, DV pathogenesis study, and even DV diagnostic reagent development.     

Sequence and Structure Based Binding Prediction Study of HLA Class I and cTAP Binding Peptides for Japanese Encephalitis Vaccine Development

Japanese encephalitis is a major threat in developing countries, even the availability of several conventional vaccines, which demand development of more effective vaccines. The present study used propred I and Immune Epitope Database Artificial Neural Network (ANN) algorithm (IEDB-ANN) to identify the conserve and promiscuous T cell epitopes from JEV proteome followed by structure based analysis of potential epitopes. Among all identified 102 epitopes, ten epitope were promiscuous but two epitopes of glycoprotein viz. ⁵⁵LVTVNPFVA⁶³ and ³⁸IPIVSVASL⁴⁶ were found most promiscuous, highly conserved and high population coverage in comparison of known antigenic positive control peptides. The B cell epitopes of glycoprotein also share these two T cell epitopes revealed by BCPred algorithm which can be a basis to confer the protection by neutralizing antibody combined with an effective cell-mediated response. Further, Autodock 4.2 and NAMD–VMD molecular dynamics simulation were used for docking and molecular dynamics simulation respectively, to validate epitope and allele complex binding stability. The 3D structure models were generated for epitopes and corresponding HLA allele by Pepstr and Modeller 9.10 respectively. Epitope LVTVNPFVA–B5101 allele complex showed best energy minimization and stability over the time window during simulation. Here we also present the binding sequel of epitope LVTVNPFVA and its eventual transport through cTAP1 (PDB ID: 1JJ7) revealed by Autodock 4.2, which is an essential path for HLA class I binding epitopes to elicit immune response. The docking experiment of epitope LVTVNPFVA and cTAP1 very well show a 2 H-bond with a binding energy of ?1.88 kcal/mol and other binding state of epitope forming no H-bond with a binding energy of ?1.13 kcal/mol in the lower area of cTAP1 cavity. These results show a smooth pass through of the epitope across the channel of cTAP1. Overall, identified peptides have potential application in the design and development of short peptide based vaccines and diagnostic agents for Japanese encephalitis.     

Identification of human T cell receptor gammadelta-recognized epitopes/proteins via CDR3delta peptide-based immunobiochemical strategy

Human T lymphocytes, bearing T cell receptor (TCR) gammadelta, play an important role in anti-tumor/microbe immune responses. However, few tumor antigens recognized by TCRgammadelta have been defined so far. To investigate antigenic epitopes/proteins recognized by gammadeltaT cells, we have established a new immunobiochemical strategy that uses complementarity-determining region 3 of TCR delta chain (CDR3delta) peptide-mediated epitope/protein-binding assays. CDR3delta peptides synthesized using the CDR3 region in TCR Vdelta2 chain were validated for their binding specificity to target cells or tissues. These CDR3delta peptides were then employed as probes to pan putative epitopes in a 12-mer random peptide phage-displayed library and to identify putative protein ligands within tumor protein extracts by affinity chromatography and liquid chromatography/electrospray ionization-tandem mass spectrometry analysis. As a result, we have identified nine peptides and two proteins for TCRgammadelta, including human mutS homolog 2 (hMSH2) and heat shock protein (HSP) 60. All nine tested epitope peptides not only bind to gammadeltaT cells but also functionally activate gammadeltaT cells in vitro. Identification of HSP60 confirms the validity of this method as HSP60 is an identified ligand for TCRgammadelta. We show that hMSH2 is expressed on the surface of SKOV3 tumor cells, and cytotoxicity of Vdelta2 gammadeltaT cells to SKOV3 cells was blocked by anti-hMSH2 antibody, suggesting that hMSH2 may be a new ligand for TCRgammadelta. Taken together, our findings provide a novel immunobiochemical strategy to identify epitopes/proteins recognized by gammadeltaT cells.     

Identification of neutralizing and nonneutralizing epitopes in the porcine reproductive and respiratory syndrome virus GP5 ectodomain

After infection of swine with porcine reproductive and respiratory syndrome virus (PRRSV), there is a rapid rise of PRRSV-specific nonneutralizing antibodies (NNA), while neutralizing antibodies (NA) are detectable not sooner than 3 weeks later. To characterize neutralizing epitopes, we selected phages from a 12-mer phage display library using anti-PRRSV neutralizing monoclonal antibody (MAb) ISU25-C1. In addition, phages carrying peptides recognized by swine antibodies with high seroneutralizing titer were isolated after subtracting from the library those clones binding to swine anti-PRRSV serum with no neutralizing activity. Two epitopes located in the ectodomain of PRRSV GP5 were identified. One of these epitopes, which we named epitope B, was recognized both by neutralizing MAb ISU25-C1 and swine neutralizing serum (NS) but not by swine nonneutralizing serum (NNS), indicating that it is a neutralizing epitope. Epitope B is sequential, conserved among isolates, and not immunodominant. Antibodies directed against it are detected in serum late after infection. In contrast, the other epitope, which we named epitope A, is hypervariable and immunodominant. Antibodies against it appear early after infection with PRRSV. This epitope is recognized by swine NNA but is not recognized by either neutralizing MAb ISU25-C1 or swine NA, indicating that it is not involved in PRRSV neutralization. During infection with PRRSV, epitope A may act as a decoy, eliciting most of the antibodies directed to GP5 and delaying the induction of NA against epitope B for at least 3 weeks. These results are relevant to the design of vaccines against PRRSV.     

Epitope-Analyzer: A structure-based webtool to analyze broadly neutralizing epitopes

The antigenic epitope regions of pathogens (e.g., viruses) are recognized by antibodies (Abs) and subsequently cleared by the host immune system, thereby protecting us from disease. Some of these epitopes are conserved among different variants or subgroups of pathogens (e.g., Influenza (FLU) viruses, Coronaviruses), hence can be targeted for potential broad-neutralization. Here we report a web-based tool, Epitope Analyzer (EA), that rapidly identifies conformational epitope and paratope residues in an antigen–antibody complex structure. Furthermore, the tool provides the ways and means to analyze broadly neutralizing epitopes by comparing the equivalent epitope residues in similar antigen structures. The similarity in the epitope residues between (multiple) pairs of similar antigen molecules suggest the presence of conserved epitopes that can be targeted by broadly neutralizing antibodies. These details can be used as a guide in developing effective treatments, such as the design of novel vaccines and formulation of cocktail of broadly neutralizing antibodies, against multiple variants or subgroups of viruses. The web application can be freely accessed from the URL, http://viperdb.scripps.edu/ea.php.     

Induction of antibodies in rhesus macaques that recognize a fusion-intermediate conformation of HIV-1 gp41

A component to the problem of inducing broad neutralizing HIV-1 gp41 membrane proximal external region (MPER) antibodies is the need to focus the antibody response to the transiently exposed MPER pre-hairpin intermediate neutralization epitope. Here we describe a HIV-1 envelope (Env) gp140 oligomer prime followed by MPER peptide-liposomes boost strategy for eliciting serum antibody responses in rhesus macaques that bind to a gp41 fusion intermediate protein. This Env-liposome immunization strategy induced antibodies to the 2F5 neutralizing epitope ⁶⁶⁴DKW residues, and these antibodies preferentially bound to a gp41 fusion intermediate construct as well as to MPER scaffolds stabilized in the 2F5-bound conformation. However, no serum lipid binding activity was observed nor was serum neutralizing activity for HIV-1 pseudoviruses present. Nonetheless, the Env-liposome prime-boost immunization strategy induced antibodies that recognized a gp41 fusion intermediate protein and was successful in focusing the antibody response to the desired epitope.     

Grafting of material-binding function into antibodies Functionalization by peptide grafting

Quite recently, a few antibodies against bulk material surface have been selected from a human repertoire antibody library, and they are attracting immense interest in the bottom-up integration of nanomaterials. Here, we constructed antibody fragments with binding affinity and specificity for nonbiological inorganic material surfaces by grafting material-binding peptides into loops of the complementarity determining region (CDR) of antibodies. Loops were replaced by peptides with affinity for zinc oxide and silver material surfaces. Selection of CDR loop for replacement was critical to the functionalization of the grafted fragments; the grafting of material-binding peptide into the CDR2 loop functionalized the antibody fragments with the same affinity and selectivity as the peptides used. Structural insight on the scaffold fragment used implies that material-binding peptide should be grafted onto the most exposed CDR loop on scaffold fragment. We show that the CDR-grafting technique leads to a build-up creation of the antibody with affinity for nonbiological materials.     

The testosterone binding mechanism of an antibody derived from a naïve human scFv library

A testosterone binding scFv antibody was isolated from a naïve human library with a modest size of 10⁸ clones. The crystal structure of the Fab fragment form of the 5F2 antibody clone complexed with testosterone determined at 1.5 Å resolution shows that the hapten is bound deeply in the antibody binding pocket. In addition to the interactions with framework residues only CDR‐L3 and CDR‐H3 loops interact with testosterone and the heavy chain forms the majority of the contacts with the hapten. The testosterone binding site of the 5F2 antibody with a high abundance of aromatic amino acid residues shows similarity with an in vitro affinity matured antibody having around 300 times higher affinity. The moderate affinity of the 5F2 antibody originates from the different orientation of the hapten and few light chain contacts. This is the first three‐dimensional structure of a human steroid hormone binding antibody that has been isolated from a naïve human repertoire. Copyright © 2010 John Wiley & Sons, Ltd.     

Diversification of specificity after maturation of the antibody response to the HIV gp41 epitope ELDKWA

During maturing antibody responses the increase in affinity for target antigens is achieved by genetic diversification of antibody genes followed by selection for improved binding. The effect this process has on the specificity of antibody for variants of the antigen is not well-defined, despite the potential role of antibody diversification in generating enhanced protection against pathogen escape mutants, or novel specificities after vaccination. To investigate this, a library of single amino-acid substitution epitope variants has been screened with serum obtained at different time-points after immunization of mice with the HIV gp41 peptide epitope ELDKWA. The serum IgG response is shown to mature and increase affinity for ELDKWA, and the titre and affinity of IgG against most epitope variants tested increases. Furthermore there is a bias towards high affinity serum IgG binding to variant epitopes with conservative substitutions, although underlying this trend there is also significant binding to many epitopes with non-conservative substitutions. Thus, maturation of the antibody response to a single epitope results in a broadening of the high-affinity response toward variant epitopes. This implies that many pathogen epitope escape variants that could manifest as single amino-acid substitutions would not emerge by escaping immune surveillance.     

Human Germline Antibody Gene Segments Encode Polyspecific Antibodies

Structural flexibility in germline gene-encoded antibodies allows promiscuous binding to diverse antigens. The binding affinity and specificity for a particular epitope typically increase as antibody genes acquire somatic mutations in antigen-stimulated B cells. In this work, we investigated whether germline gene-encoded antibodies are optimal for polyspecificity by determining the basis for recognition of diverse antigens by antibodies encoded by three V_H gene segments. Panels of somatically mutated antibodies encoded by a common V_H gene, but each binding to a different antigen, were computationally redesigned to predict antibodies that could engage multiple antigens at once. The Rosetta multi-state design process predicted antibody sequences for the entire heavy chain variable region, including framework, CDR1, and CDR2 mutations. The predicted sequences matched the germline gene sequences to a remarkable degree, revealing by computational design the residues that are predicted to enable polyspecificity, i.e., binding of many unrelated antigens with a common sequence. The process thereby reverses antibody maturation in silico. In contrast, when designing antibodies to bind a single antigen, a sequence similar to that of the mature antibody sequence was returned, mimicking natural antibody maturation in silico. We demonstrated that the Rosetta computational design algorithm captures important aspects of antibody/antigen recognition. While the hypervariable region CDR3 often mediates much of the specificity of mature antibodies, we identified key positions in the V_H gene encoding CDR1, CDR2, and the immunoglobulin framework that are critical contributors for polyspecificity in germline antibodies. Computational design of antibodies capable of binding multiple antigens may allow the rational design of antibodies that retain polyspecificity for diverse epitope binding.     

Epitope mapping of Borrelia burgdorferi OspC protein in homodimeric fold

In current work, we used recombinant OspC protein derived from B. afzelii strain BRZ31 in the native homodimeric fold for mice immunization and following selection process to produce three mouse monoclonal antibodies able to bind to variable parts of up to five different OspC proteins. Applying the combination of mass spectrometry assisted epitope mapping and affinity based theoretical prediction we have localized regions responsible for antigen‐antibody interactions and approximate epitopes' amino acid composition. Two mAbs (3F4 and 2A9) binds to linear epitopes located in previously described immunogenic regions in the exposed part of OspC protein. The third mAb (2D1) recognises highly conserved discontinuous epitope close to the ligand binding domain 1.