Oligomeric states of the Shigella translocator protein IpaB provide structural insights into formation of the type III secretion translocon

The Shigella flexneri Type III secretion system (T3SS) senses contact with human intestinal cells and injects effector proteins that promote pathogen entry as the first step in causing life threatening bacillary dysentery (shigellosis). The Shigella Type III secretion apparatus (T3SA) consists of an anchoring basal body, an exposed needle, and a temporally assembled tip complex. Exposure to environmental small molecules recruits IpaB, the first hydrophobic translocator protein, to the maturing tip complex. IpaB then senses contact with a host cell membrane, forming the translocon pore through which effectors are delivered to the host cytoplasm. Within the bacterium, IpaB exists as a heterodimer with its chaperone IpgC; however, IpaB's structural state following secretion is unknown due to difficulties isolating stable protein. We have overcome this by coexpressing the IpaB/IpgC heterodimer and isolating IpaB by incubating the complex in mild detergents. Interestingly, preparation of IpaB with n‐octyl‐oligo‐oxyethylene (OPOE) results in the assembly of discrete oligomers while purification in N,N‐dimethyldodecylamine N‐oxide (LDAO) maintains IpaB as a monomer. In this study, we demonstrate that IpaB tetramers penetrate phospholipid membranes to allow a size‐dependent release of small molecules, suggesting the formation of discrete pores. Monomeric IpaB also interacts with liposomes but fails to disrupt them. From these and additional findings, we propose that IpaB can exist as a tetramer having inherent flexibility, which allows it to cooperatively interact with and insert into host cell membranes. This event may then lay the foundation for formation of the Shigella T3SS translocon pore.     

Binding affects the tertiary and quaternary structures of the Shigella translocator protein IpaB and its chaperone IpgC

Shigella flexneri uses its type III secretion system (T3SS) to promote invasion of human intestinal epithelial cells as the first step in causing shigellosis, a life-threatening form of dysentery. The Shigella type III secretion apparatus (T3SA) consists of a basal body that spans the bacterial envelope and an exposed needle that injects effector proteins into target cells. The nascent Shigella T3SA needle is topped with a pentamer of the needle tip protein invasion plasmid antigen D (IpaD). Bile salts trigger recruitment of the first hydrophobic translocator protein, IpaB, to the tip complex where it senses contact with a host membrane. In the bacterial cytoplasm, IpaB exists in a complex with its chaperone IpgC. Several structures of IpgC have been determined, and we recently reported the 2.1 ? crystal structure of the N-terminal domain (IpaB(74.224)) of IpaB. Like IpgC, the IpaB N-terminal domain exists as a homodimer in solution. We now report that when the two are mixed, these homodimers dissociate and form heterodimers having a nanomolar dissociation constant. This is consistent with the equivalent complexes copurified after they had been co-expressed in Escherichia coli. Fluorescence data presented here also indicate that the N-terminal domain of IpaB possesses two regions that appear to contribute additively to chaperone binding. It is also likely that the N-terminus of IpaB adopts an alternative conformation as a result of chaperone binding. The importance of these findings within the functional context of these proteins is discussed.     

Using disruptive insertional mutagenesis to identify the in situ structure‐function landscape of the Shigella translocator protein IpaB

Bacterial type III secretion systems (T3SS) are used to inject proteins into mammalian cells to subvert cellular functions. The Shigella T3SS apparatus (T3SA) is comprised of a basal body, cytoplasmic sorting platform and exposed needle with needle “tip complex” (TC). TC maturation occurs when the translocator protein IpaB is recruited to the needle tip where both IpaD and IpaB control secretion induction. IpaB insertion into the host membrane is the first step of translocon pore formation and secretion induction. We employed disruptive insertional mutagenesis, using bacteriophage T4 lysozyme (T4L), within predicted IpaB loops to show how topological features affect TC functions (secretion control, translocon formation and effector secretion). Insertions within the N‐terminal half of IpaB were most likely to result in a loss of steady‐state secretion control, however, all but the two that were not recognized by the T3SA retained nearly wild‐type hemolysis (translocon formation) and invasiveness levels (effector secretion). In contrast, all but one insertion in the C‐terminal half of IpaB maintained secretion control but were impaired for hemolysis and invasion. These nature of the data suggest the latter mutants are defective in a post‐secretion event, most likely due to impaired interactions with the second translocator protein IpaC. Intriguingly, only two insertion mutants displayed readily detectable T4L on the bacterial surface. The data create a picture in which the makeup and structure of a functional T3SA TC is highly amenable to physical perturbation, indicating that the tertiary structure of IpaB within the TC is more plastic than previously realized.     

NMR identification of the binding surfaces involved in the Salmonella and Shigella Type III secretion tip‐translocon protein–protein interactions

The type III secretion system (T3SS) is essential for the pathogenesis of many bacteria including Salmonella and Shigella, which together are responsible for millions of deaths worldwide each year. The structural component of the T3SS consists of the needle apparatus, which is assembled in part by the protein–protein interaction between the tip and the translocon. The atomic detail of the interaction between the tip and the translocon proteins is currently unknown. Here, we used NMR methods to identify that the N‐terminal domain of the Salmonella SipB translocon protein interacts with the SipD tip protein at a surface at the distal region of the tip formed by the mixed α/β domain and a portion of its coiled‐coil domain. Likewise, the Shigella IpaB translocon protein and the IpaD tip protein interact with each other using similar surfaces identified for the Salmonella homologs. Furthermore, removal of the extreme N‐terminal residues of the translocon protein, previously thought to be important for the interaction, had little change on the binding surface. Finally, mutations at the binding surface of SipD reduced invasion of Salmonella into human intestinal epithelial cells. Together, these results reveal the binding surfaces involved in the tip‐translocon protein–protein interaction and advance our understanding of the assembly of the T3SS needle apparatus. Proteins 2016; 84:1097–1107. © 2016 Wiley Periodicals, Inc.     

Deoxycholate interacts with IpaD of Shigella flexneri in inducing the recruitment of IpaB to the type III secretion apparatus needle tip

Type III secretion (TTS) is an essential virulence function for Shigella flexneri that delivers effector proteins that are responsible for bacterial invasion of intestinal epithelial cells. The Shigella TTS apparatus (TTSA) consists of a basal body that spans the bacterial inner and outer membranes and a needle exposed at the pathogen surface. At the distal end of the needle is a "tip complex" composed of invasion plasmid antigen D (IpaD). IpaD not only regulates TTS, but is required for the recruitment and stable association of the translocator protein IpaB at the TTSA needle tip in the presence of deoxycholate or other bile salts. This phenomenon is not accompanied by induction of TTS or the recruitment of IpaC to the Shigella surface. We now show that IpaD specifically binds fluorescein-labeled deoxycholate and, based on energy transfer measurements and docking simulations, this interaction appears to occur where the N-terminal domain of IpaD meets its central coiled-coil, a region that may also be involved in needle-tip interactions. TTS is initiated as a series of distinct steps and that small molecules present in the bacterial milieu are capable of inducing the first step of TSS through interactions with the needle tip protein IpaD. Furthermore, the amino acids proposed to be important for deoxycholate binding by IpaD appear to have significant roles in regulating tip complex composition and pathogen entry into host cells.     

The type III secretion system needle tip complex mediates host cell sensing and translocon insertion

Type III secretion systems (T3SSs) are essential virulence determinants of many Gram-negative bacterial pathogens. The Shigella T3SS consists of a cytoplasmic bulb, a transmembrane region and a hollow 'needle' protruding from the bacterial surface. Physical contact with host cells initiates secretion and leads to assembly of a pore, formed by IpaB and IpaC, in the host cell membrane, through which proteins that facilitate host cell invasion are translocated. As the needle is implicated in host cell sensing and secretion regulation, its tip should contain components that initiate host cell contact. Through biochemical and immunological studies of wild-type and mutant Shigella T3SS needles, we reveal tip complexes of differing compositions and functional states, which appear to represent the molecular events surrounding host cell sensing and pore formation. Our studies indicate that the interaction between IpaB and IpaD at needle tips is key to host cell sensing, orchestration of IpaC secretion and its subsequent assembly at needle tips. This allows insertion into the host cell membrane of a translocation pore that is continuous with the needle.     

Functional relatedness in the Inv/Mxi‐Spa type III secretion system family

Type III Secretion Systems (T3SSs) are structurally conserved nanomachines that span the inner and outer bacterial membranes, and via a protruding needle complex contact host cell membranes and deliver type III effector proteins. T3SS are phylogenetically divided into several families based on structural basal body components. Here we have studied the evolutionary and functional conservation of four T3SS proteins from the Inv/Mxi‐Spa family: a cytosolic chaperone, two hydrophobic translocators that form a plasma membrane‐integral pore, and the hydrophilic ‘tip complex’ translocator that connects the T3SS needle to the translocon pore. Salmonella enterica serovar Typhimurium (S. Typhimurium), a common cause of food‐borne gastroenteritis, possesses two T3SSs, one belonging to the Inv/Mxi‐Spa family. We used invasion‐deficient S. Typhimurium mutants as surrogates for expression of translocator orthologs identified from an extensive phylogenetic analysis, and type III effector translocation and host cell invasion as a readout for complementation efficiency, and identified several Inv/Mxi‐Spa orthologs that can functionally substitute for the S. Typhimurium chaperone and translocator proteins. Functional complementation correlates with amino acid sequence identity between orthologs, but varies considerably between the four proteins. This is the first in‐depth survey of the functional interchangeability of Inv/Mxi‐Spa T3SS proteins acting directly at the host‐pathogen interface.     

Structure-function analysis of the Shigella virulence factor IpaB

Infection by the gram-negative bacterium Shigella flexneri results in dysentery, an acute inflammatory disease of the colon. Essential events in the pathogenesis of Shigella infections include bacterial invasion of epithelial cells, escape from the phagosome, and induction of apoptosis in macrophages. The Shigella virulence factor invasion plasmid antigen B (IpaB) is required for all of these processes. Induction of apoptosis is dependent on IpaB binding to the cysteine protease caspase-1 (Casp-1). The activation of this enzyme triggers both apoptosis and release of the proinflammatory cytokine interleukin-1beta. Several IpaB mutants were generated to correlate function with protein subdomains. We determined that the N-terminal portion of IpaB is necessary for stable expression of IpaB. A putative amphipathic alpha-helical domain preserves the structure of IpaB. We found 10 consecutive residues within the amino terminus of the hydrophobic region that play a critical role in invasion, phagosomal escape, and cytotoxicity. An IpaB mutant carrying a mutation in this region binds to Casp-1 yet is not cytotoxic, even following direct delivery to the macrophage cytoplasm. These results indicate that the association between IpaB and Casp-1 is only a step in the activation of macrophage apoptosis.     

Three‐dimensional electron microscopy reconstruction and cysteine‐mediated crosslinking provide a model of the type III secretion system needle tip complex

Type III secretion systems are found in many Gram‐negative bacteria. They are activated by contact with eukaryotic cells and inject virulence proteins inside them. Host cell detection requires a protein complex located at the tip of the device's external injection needle. The Shigella tip complex (TC) is composed of IpaD, a hydrophilic protein, and IpaB, a hydrophobic protein, which later forms part of the injection pore in the host membrane. Here we used labelling and crosslinking methods to show that TCs from a ΔipaB strain contain five IpaD subunits while the TCs from wild‐type can also contain one IpaB and four IpaD subunits. Electron microscopy followed by single particle and helical image analysis was used to reconstruct three‐dimensional images of TCs at ～20 Å resolution. Docking of an IpaD crystal structure, constrained by the crosslinks observed, reveals that TC organisation is different from that of all previously proposed models. Our findings suggest new mechanisms for TC assembly and function. The TC is the only site within these secretion systems targeted by disease‐protecting antibodies. By suggesting how these act, our work will allow improvement of prophylactic and therapeutic strategies.     

Conformational changes in IpaD from Shigella flexneri upon binding bile salts provide insight into the second step of type III secretion

Shigella flexneri uses its type III secretion apparatus (TTSA) to inject host-altering proteins into targeted eukaryotic cells. The TTSA is composed of a basal body and an exposed needle with invasion plasmid antigen D (IpaD) forming a tip complex that controls secretion. The bile salt deoxycholate (DOC) stimulates recruitment of the translocator protein IpaB into the maturing TTSA needle tip complex. This process appears to be triggered by a direct interaction between DOC and IpaD. Fluorescence spectroscopy and NMR spectroscopy are used here to confirm the DOC-IpaD interaction and to reveal that IpaD conformational changes upon DOC binding trigger the appearance of IpaB at the needle tip. Fo?rster resonance energy transfer between specific sites on IpaD was used here to identify changes in distances between IpaD domains as a result of DOC binding. To further explore the effects of DOC binding on IpaD structure, NMR chemical shift mapping was employed. The environments of residues within the proposed DOC binding site and additional residues within the "distal" globular domain were perturbed upon DOC binding, further indicating that conformational changes occur within IpaD upon DOC binding. These events are proposed to be responsible for the recruitment of IpaB at the TTSA needle tip. Mutation analyses combined with additional spectroscopic analyses confirm that conformational changes in IpaD induced by DOC binding contribute to the recruitment of IpaB to the S. flexneri TTSA needle tip. These findings lay the foundation for determining how environmental factors promote TTSA needle tip maturation prior to host cell contact.     

The structures of coiled-coil domains from type III secretion system translocators reveal homology to pore-forming toxins

Many pathogenic Gram-negative bacteria utilize type III secretion systems (T3SSs) to alter the normal functions of target cells. Shigella flexneri uses its T3SS to invade human intestinal cells to cause bacillary dysentery (shigellosis) that is responsible for over one million deaths per year. The Shigella type III secretion apparatus is composed of a basal body spanning both bacterial membranes and an exposed oligomeric needle. Host altering effectors are secreted through this energized unidirectional conduit to promote bacterial invasion. The active needle tip complex of S. flexneri is composed of a tip protein, IpaD, and two pore-forming translocators, IpaB and IpaC. While the atomic structure of IpaD has been elucidated and studied, structural data on the hydrophobic translocators from the T3SS family remain elusive. We present here the crystal structures of a protease-stable fragment identified within the N-terminal regions of IpaB from S. flexneri and SipB from Salmonella enterica serovar Typhimurium determined at 2.1 Å and 2.8 Å limiting resolution, respectively. These newly identified domains are composed of extended-length (114 Å in IpaB and 71 Å in SipB) coiled-coil motifs that display a high degree of structural homology to one another despite the fact that they share only 21% sequence identity. Further structural comparisons also reveal substantial similarity to the coiled-coil regions of pore-forming proteins from other Gram-negative pathogens, notably, colicin Ia. This suggests that these mechanistically separate and functionally distinct membrane-targeting proteins may have diverged from a common ancestor during the course of pathogen-specific evolutionary events.     

Shigella IpaD has a dual role: signal transduction from the type III secretion system needle tip and intracellular secretion regulation

Type III secretion systems (T3SSs) are protein injection devices essential for the interaction of many Gram‐negative bacteria with eukaryotic cells. While Shigella assembles its T3SS when the environmental conditions are appropriate for invasion, secretion is only activated after physical contact with a host cell. First, the translocators are secreted to form a pore in the host cell membrane, followed by effectors which manipulate the host cell. Secretion activation is tightly controlled by conserved T3SS components: the needle tip proteins IpaD and IpaB, the needle itself and the intracellular gatekeeper protein MxiC. To further characterize the role of IpaD during activation, we combined random mutagenesis with a genetic screen to identify ipaD mutant strains unable to respond to host cell contact. Class II mutants have an overall defect in secretion induction. They map to IpaD's C‐terminal helix and likely affect activation signal generation or transmission. The Class I mutant secretes translocators prematurely and is specifically defective in IpaD secretion upon activation. A phenotypically equivalent mutant was found in mxiC. We show that IpaD and MxiC act in the same intracellular pathway. In summary, we demonstrate that IpaD has a dual role and acts at two distinct locations during secretion activation.     

The purified Shigella IpaB and Salmonella SipB translocators share biochemical properties and membrane topology

An essential early event in Shigella and Salmonella pathogenesis is invasion of non-phagocytic intestinal epithelial cells. Pathogen entry is triggered by the delivery of multiple bacterial effector proteins into target mammalian cells. The Shigella invasion plasmid antigen B (IpaB), which inserts into the host plasma membrane, is required for effector delivery and invasion. To investigate the biochemical properties and membrane topology of IpaB, we purified the native full-length protein following expression in laboratory Escherichia coli. Purified IpaB assembled into trimers via an N-terminal domain predicted to form a trimeric coiled-coil, and is predominantly alpha-helical. Upon lipid interaction, two transmembrane domains (residues 313-333 and 399-419) penetrate the bilayer, allowing the intervening hydrophilic region (334-398) to cross the membrane. Purified IpaB integrated into model, erythrocyte and mammalian cell membranes without disrupting bilayer integrity, and induced liposome fusion in vitro. An IpaB-derived 162 residue alpha-helical polypeptide (IpaB(418-580)) is a potent inhibitor of IpaB-directed liposome fusion in vitro and blocked Shigella entry into cultured mammalian cells at 10(-8) M. It is also a heterologous inhibitor of Salmonella invasion protein B (SipB) activity and Salmonella entry. In contrast, IpaB(418-580) failed to prevent the contact-dependent haemolytic activity of Shigella. These findings question the proposed direct link between contact-dependent haemolysis and Shigella entry, and demonstrate that IpaB and SipB share biochemical properties and membrane topology, consistent with a conserved mode of action during cell entry.     

Ultrastructural analysis of IpaD at the tip of the nascent MxiH type III secretion apparatus of Shigella flexneri

Shigella flexneri is a Gram-negative enteric pathogen that is the predominant cause of bacillary dysentery. Shigella uses a type III secretion system to deliver effector proteins that alter normal target cell functions to promote pathogen invasion. The type III secretion apparatus (T3SA) consists of a basal body, an extracellular needle, and a tip complex that is responsible for delivering effectors into the host cell cytoplasm. IpaD [Ipa (invasion plasmid antigen)] is the first protein to localize to the T3SA needle tip, where it prevents premature effector secretion and serves as an environmental sensor for triggering recruitment of the translocator protein IpaB to the needle tip. Thus, IpaD would be expected to form a stable structure whose overall architecture supports its functions. It is not immediately obvious from the published IpaD crystal structure (Protein Data Bank ID 2j0o) how a multimer of IpaD would be incorporated at the tip of the first static T3SA intermediate, nor what its functional role would be in building a mature T3SA. Here, we produce three-dimensional reconstructions from transmission electron microscopy images of IpaD localized at the Shigella T3SA needle tip for comparison to needle tips from a Shigella ipaD-null mutant. The results demonstrate that IpaD resides as a homopentamer at the needle tip of the T3SA. Furthermore, comparison to tips assembled from the distal domain IpaD(Δ192-267) mutation shows that IpaD adopts an elongated conformation that facilitates its ability to control type III secretion and stepwise assembly of the T3SA needle tip complex.     

Atomistic mechanisms of huntingtin N‐terminal fragment insertion on a phospholipid bilayer revealed by molecular dynamics simulations

The huntingtin protein is characterized by a segment of consecutive glutamines (Q_N) that is responsible for its fibrillation. As with other amyloid proteins, misfolding of huntingtin is related to Huntington's disease through pathways that can involve interactions with phospholipid membranes. Experimental results suggest that the N‐terminal 17‐amino‐acid sequence (htt^NT) positioned just before the Q_N region is important for the binding of huntingtin to membranes. Through all‐atom explicit solvent molecular dynamics simulations, we unveil the structure and dynamics of the htt^NTQ_N fragment on a phospholipid membrane at the atomic level. We observe that the insertion dynamics of this peptide can be described by four main steps—approach, reorganization, anchoring, and insertion—that are very diverse at the atomic level. On the membrane, the htt^NT peptide forms a stable α‐helix essentially parallel to the membrane with its nonpolar side‐chains—mainly Leu‐4, Leu‐7, Phe‐11 and Leu‐14—positioned in the hydrophobic core of the membrane. Salt‐bridges involving Glu‐5, Glu‐12, Lys‐6, and Lys‐15, as well as hydrogen bonds involving Thr‐3 and Ser‐13 with the phospholipids also stabilize the structure and orientation of the htt^NT peptide. These observations do not significantly change upon adding the Q_N region whose role is rather to provide, through its hydrogen bonds with the phospholipids' head group, a stable scaffold facilitating the partitioning of the htt^NT region in the membrane. Moreover, by staying accessible to the solvent, the amyloidogenic Q_N region could also play a key role for the oligomerization of htt^NTQ_N on phospholipid membranes. Proteins 2014; 82:1409–1427. © 2014 Wiley Periodicals, Inc.     

Lipid‐associated aggregate formation of superoxide dismutase‐1 is initiated by membrane‐targeting loops

Copper‐Zinc superoxide dismutase 1 (SOD1) is a homodimeric enzyme that protects cells from oxidative damage. Hereditary and sporadic amyotrophic lateral sclerosis may be linked to SOD1 when the enzyme is destabilized through mutation or environmental stress. The cytotoxicity of demetallated or apo‐SOD1 aggregates may be due to their ability to cause defects within cell membranes by co‐aggregating with phospholipids. SOD1 monomers may associate with the inner cell membrane to receive copper ions from membrane‐bound copper chaperones. But how apo‐SOD1 interacts with lipids is unclear. We have used atomistic molecular dynamics simulations to reveal that flexible electrostatic and zinc‐binding loops in apo‐SOD1 dimers play a critical role in the binding of 1‐octanol clusters and phospholipid bilayer, without any significant unfolding of the protein. The apo‐SOD1 monomer also associates with phospholipid bilayer via its zinc‐binding loop rather than its exposed hydrophobic dimerization interface. Our observed orientation of the monomer on the bilayer would facilitate its association with a membrane‐bound copper chaperone. The orientation also suggests how membrane‐bound monomers could act as seeds for membrane‐associated SOD1 aggregation. Proteins 2014; 82:3194–3209. © 2014 Wiley Periodicals, Inc.     

Key steps in type III secretion system (T3SS) towards translocon assembly with potential sensor at plant plasma membrane

Many plant‐ and animal‐pathogenic Gram‐negative bacteria employ the type III secretion system (T3SS) to translocate effector proteins from bacterial cells into the cytosol of eukaryotic host cells. The effector translocation occurs through an integral component of T3SS, the channel‐like translocon, assembled by hydrophilic and hydrophobic proteinaceous translocators in a two‐step process. In the first, hydrophilic translocators localize to the tip of a proteinaceous needle in animal pathogens, or a proteinaceous pilus in plant pathogens, and associate with hydrophobic translocators, which insert into host plasma membranes in the second step. However, the pilus needs to penetrate plant cell walls in advance. All hydrophilic translocators so far identified in plant pathogens are characteristic of harpins: T3SS accessory proteins containing a unitary hydrophilic domain or an additional enzymatic domain. Two‐domain harpins carrying a pectate lyase domain potentially target plant cell walls and facilitate the penetration of the pectin‐rich middle lamella by the bacterial pilus. One‐domain harpins target plant plasma membranes and may play a crucial role in translocon assembly, which may also involve contrapuntal associations of hydrophobic translocators. In all cases, sensory components in the target plasma membrane are indispensable for the membrane recognition of translocators and the functionality of the translocon. The conjectural sensors point to membrane lipids and proteins, and a phosphatidic acid and an aquaporin are able to interact with selected harpin‐type translocators. Interactions between translocators and their sensors at the target plasma membrane are assumed to be critical for translocon assembly.     

Characterizing the binding of annexin V to a lipid bilayer using molecular dynamics simulations

Annexins play critical roles in membrane organization, membrane trafficking and vesicle transport. The family members share the ability to bind to membranes with high affinities, but the interactions between annexins and membranes remain unclear. Here, using long‐time molecular dynamics simulations, we provide detailed information for the binding of an annexin V trimer to a POPC/POPS lipid bilayer. Calcium ions function as bridges between several negatively charged residues of annexin V and the oxygen atoms of lipids. The preferred calcium‐bridges are those formed via the carboxyl oxygen atoms of POPS lipids. H‐bonds and hydrophobic interactions formed by several critical residues have also been observed in the annexin‐membrane interface. The annexin‐membrane binding causes small changes of annexin trimer structures, while has significant effects on lipid bilayer structures. The lipid bilayer shows a bent shape and forms a concave region in the annexin‐membrane interaction interface, which provides an atomic‐level evidence to support the view that annexins could disturb the stability of lipids and bend membranes. This study provides insights into the commonly occurring PS‐dependent and calcium‐dependent binding of proteins to membranes. Proteins 2014; 82:312–322. © 2013 Wiley Periodicals, Inc.     

Characterization of the Interaction between the Salmonella Type III Secretion System Tip Protein SipD and the Needle Protein PrgI by Paramagnetic Relaxation Enhancement

Many Gram-negative bacteria that cause major diseases and mortality worldwide require the type III secretion system (T3SS) to inject virulence proteins into their hosts and cause infections. A structural component of the T3SS is the needle apparatus, which consists of a base, an external needle, and a tip complex. In Salmonella typhimurium, the external needle is assembled by the polymerization of the needle protein PrgI. On top of this needle sits a tip complex, which is partly formed by the tip protein SipD. How SipD interacts with PrgI during the assembly of the T3SS needle apparatus remains unknown. The central region of PrgI forms an α-helical hairpin, whereas SipD has a long central coiled-coil, which is a defining structural feature of other T3SS tip proteins as well. Using NMR paramagnetic relaxation enhancement, we have identified a specific region on the SipD coiled-coil that interacts directly with PrgI. We present a model of how SipD might dock at the tip of the needle based on our paramagnetic relaxation enhancement results, thus offering new insight about the mechanism of assembly of the T3SS needle apparatus.     

Structural and functional characterization of SiiA,an auxiliary protein from the SPI4‐encoded type 1 secretion system from Salmonella enterica

Salmonella invasion is mediated by a concerted action of the Salmonella pathogenicity island 4 (SPI4)‐encoded type one secretion system (T1SS) and the SPI1‐encoded type three secretion system (T3SS‐1). The SPI4‐encoded T1SS consists of five proteins (SiiABCDF) and secretes the giant adhesin SiiE. Here, we investigated structure–function relationships in SiiA, a non‐canonical T1SS subunit. We show that SiiA consists of a membrane domain, an intrinsically disordered periplasmic linker region and a folded globular periplasmic domain (SiiA‐PD). The crystal structure of SiiA‐PD displays homology to that of MotB and other peptidoglycan (PG)‐binding domains. SiiA‐PD binds PG in vitro, albeit at an acidic pH, only. Mutation of Arg162 impedes PG binding of SiiA and reduces Salmonella invasion efficacy. SiiA forms a complex with SiiB at the inner membrane (IM), and the observed SiiA‐MotB homology is paralleled by a predicted SiiB‐MotA homology. We show that, similar to MotAB, SiiAB translocates protons across the IM. Mutating Asp13 in SiiA impairs proton translocation. Overall, SiiA shares numerous properties with MotB. However, MotAB uses the proton motif force (PMF) to energize the bacterial flagellum, it remains to be shown how usage of the PMF by SiiAB assists T1SS function and Salmonella invasion.