Structure of Fab fragment of malaria transmission blocking antibody 2A8 against P. vivax P25 protein

Understanding the structural basis of recognition between antigen and antibody requires the structural comparison of free and complexed components. Previously, we have reported the crystal structure of the complex between Fab fragment of murine monoclonal antibody 2A8 (Fab2A8) and Plasmodium vivax P25 protein (Pvs25) at 3.2 Å resolution. We report here the crystallization and X-ray structure of native Fab2A8 at 4.0 Å resolution. The 2A8 antibody generated against Pvs25 prevents the formation of P. vivax oocysts in the mosquito, when assayed in membrane feeding experiment.Comparison of native Fab2A8 structure with antigen bound Fab2A8 structure indicates the significant conformational changes in CDR-H1 and CDR-H3 regions of V_H domain and CDR-L3 region of V_L domain of Fab2A8. Upon complex formation, the relative orientation between V_L and V_H domains of Fab2A8 is conserved, while significant differences are observed in elbow angles of heavy and light chains. The combing site residues of complexed Fab2A8 exhibited the reduced temperature factor compared to native Fab2A8, suggesting a loss of conformational entropy upon antigen binding.     

The Folding Pathway of the Antibody VL Domain

Antibodies are modular proteins consisting of domains that exhibit a β-sandwich structure, the so-called immunoglobulin fold. Despite structural similarity, differences in folding and stability exist between different domains. In particular, the variable domain of the light chain V_L is unusual as it is associated with misfolding diseases, including the pathologic assembly of the protein into fibrillar structures. Here, we have analysed the folding pathway of a V_L domain with a view to determine features that may influence the relationship between productive folding and fibril formation. The V_L domain from MAK33 (murine monoclonal antibody of the subtype κ/IgG1) has not previously been associated with fibrillisation but is shown here to be capable of forming fibrils. The folding pathway of this V_L domain is complex, involving two intermediates in different pathways. An obligatory early molten globule-like intermediate with secondary structure but only loose tertiary interactions is inferred. The native state can then be formed directly from this intermediate in a phase that can be accelerated by the addition of prolyl isomerases. However, an alternative pathway involving a second, more native-like intermediate is also significantly populated. Thus, the protein can reach the native state via two distinct folding pathways. Comparisons to the folding pathways of other antibody domains reveal similarities in the folding pathways; however, in detail, the folding of the V_L domain is striking, with two intermediates populated on different branches of the folding pathway, one of which could provide an entry point for molecules diverted into the amyloid pathway.     

Structure of the Murine Unglycosylated IgG1 Fc Fragment

A prototypic IgG antibody can be divided into two major structural units: the antigen-binding fragment (Fab) and the Fc fragment that mediates effector functions. The IgG Fc fragment is a homodimer of the two C-terminal domains (C_H2 and C_H3) of the heavy chains. Characteristic of the Fc part is the presence of a sugar moiety at the inner face of the C_H2 domains. The structure of this complex branched oligosaccharide is generally resolved in crystal structures of Fc fragments due to numerous well-defined sugar-protein interactions and a small number of sugar-sugar interactions. This suggested that sugars play an important role in the structure of the Fc fragment. To address this question directly, we determined the crystal structure of the unglycosylated Fc fragment of the murine IgG1 MAK33. The structures of the C_H3 domains of the unglycosylated Fc fragment superimpose perfectly with the structure of the isolated MAK33 C_H3 domain. The unglycosylated C_H2 domains, in contrast, approach each other much more closely compared to known structures of partly deglycosylated Fc fragments with rigid-body motions between 10 and 14 Å, leading to a strongly “closed” conformation of the unglycosylated Fc fragment. The glycosylation sites in the C′E loop and the BC and FG loops are well defined in the unglycosylated C_H2 domain, however, with increased mobility and with a significant displacement of about 4.9 Å for the unglycosylated Asn residue compared to the glycosylated structure. Thus, glycosylation both stabilizes the C′E-loop conformation within the C_H2 domain and also helps to ensure an “open” conformation, as seen upon Fc receptor binding. These structural data provide a rationale for the observation that deglycosylation of antibodies often compromises their ability to bind and activate Fcγ receptors.     

Coevolution of Antibody Stability and Vκ CDR-L3 Canonical Structure

Antibodies recognize antigens through six hypervariable loops, five of which have a limited set of conformations known as canonical structures. For κ light chains, the majority of CDR-L3 [the third hypervariable loop of the light chain variable domain (V_L)] adopts the type 1 canonical structure (CS1), with a cis-proline at position 95. Here, we present the design and structural studies of the monoclonal antibody mAb15 and related mutants that contained a series of progressively germline mutations only in the heavy chain variable domain (V_H) that ultimately led to an increase of more than 11 °C in the melting temperature (T_m) of the antigen-binding fragment (Fab). The all-trans CDR-L3 structure in the wild type is significantly different from any known CDR-L3 canonical structures. In the thermally stable mutants, the L94^L-S95^L peptide bond adopts an energetically unfavorable non-X-proline cis conformation, but the overall CDR-L3 loop converted to CS1. The stabilized V_H appears to function as a specific molecular chaperone that facilitated the trans-cis isomerization of S95^L. Thus, it is plausible that proline is the evolutionary choice to maintain overall structure and stability for V_L. These results provide new insights into the evolution of CS1 and suggest a potential molecular switch mechanism at position 95 that links CDR-L3 structural diversity and antibody stability and will have implications for antibody engineering.     

Crystal Structure of a Bivalent Antibody Fab Fragment

We determined the crystal structure to 1.8 Å resolution of the Fab fragment of an affinity-matured human monoclonal antibody (HC84.26.5D) that recognizes the E2 envelope glycoprotein of hepatitis C virus (HCV). Unlike conventional Fabs, which are monovalent monomers, Fab HC84.26.5D assembles into a bivalent domain-swapped dimer in which the two V_L/V_H modules are separated by ~25 Å. In solution, Fab HC84.26.5D exists predominantly as a dimer (~80%) in equilibrium with the monomeric form of the Fab (~20%). Dimerization is mediated entirely by deletion of a single residue, V_HSer113 (Kabat numbering), in the elbow region linking the V_H and C_H1 domains. In agreement with the crystal structure, dimeric Fab HC84.26.5D is able to bind two HCV E2 molecules in solution. This is only the second example of a domain-swapped Fab dimer from among >3000 Fab crystal structures determined to date. Moreover, the architecture of the doughnut-shaped Fab HC84.26.5D dimer is completely different from that of the previously reported Fab 2G12 dimer. We demonstrate that the highly identifiable shape of dimeric Fab HC84.26.5D makes it useful as a fiducial marker for single-particle cryoEM analysis of HCV E2. Bivalent domain-swapped Fab dimers engineered on the basis of HC84.26.5D may also serve as a means of doubling the effective size of conventional Fab–protein complexes for cryoEM.     

Energy-Based Analysis and Prediction of the Orientation between Light- and Heavy-Chain Antibody Variable Domains

Diversity in antibody structure is crucial to the ability of the adaptive immune system to recognize the tremendously diverse set of potential antigens. The diversity in structure is most apparent in the six hypervariable loops of the complementarity-determining regions. However, given that these loops occur at the interface of the heavy- and light-chain variable domains and form the antigen-binding site, the relative orientation of the heavy- and light-chain variable domains can create another source of structural diversity leading to changes in antigen binding. Here, we first reexamine the diversity of V_L:V_H orientations in existing antibody crystal structures using 153 nonredundant sequences, demonstrating that the variation in V_L:V_H orientation is greater than that expected from effects of crystal packing, antigen binding, or the presence of antibody constant regions and increases, on average, as sequence similarity decreases for residues in the interface between the domains. We developed a tool for predicting the relative orientations of the heavy- and light-chain variable domains using side-chain rotamer sampling in the interface and molecular-mechanics-based energy calculations. When using variable domain backbones from the crystal structures, the predicted orientation is very close (< 1 Å RMSD) to the crystallographically observed orientation in most cases, confirming that the V_L:V_H orientation is determined by the antibody sequence and suggesting an approach to predicting the relative orientation of the variable domains when building homology models of antibodies. When applied to antibody homology models generated from templates with 55-75% sequence identity, we predict the V_L:V_H orientation of 20 antibodies with an average/median RMSD of 2.1/1.6 Å to the crystal structures.     

Modification of the first constant domain of heavy chain enabled effective folding of functional anti-forskolin antigen-binding fragment for sensitive quantitative analysis

The assembly between heavy and light chains is a critical step of immunoglobulin (Ig) and fragment antigen-binding (Fab) antibody expression and of their binding activity. The genes encoding Fab were obtained from hybridoma cells secreting monoclonal antibody (MAb, IgG2b) against adenylate cyclase activator forskolin (FOR). The subclass of the first constant domain of heavy chain (C_H1) of IgG2b was modified to IgG1 via overlap extension polymerase chain reaction and expressed via Escherichia coli bacterial system. Since both Fabs (IgG2b and IgG1) were expressed as inclusion bodies, functional analysis was performed after in vitro refolding via stepwise dialysis. The result indicated that the folding efficiency between V_H-C_H1 and V_L-C_L was improved by the C_H1 modification from IgG2b to IgG1 subclass, although their specificity for FOR was not altered. Effective folding of IgG1 was also observed when they were expressed in the hemolymph of silkworm larvae using the Bombyx mori nuclear polyhedrosis virus bacmid system. An indirect competitive enzyme-linked immunosorbent assay (icELISA) was then developed for the determination of FOR using effectively prepared Fab IgG1. The sensitivity of FOR determination was in the range of 3.91–62.5 ng/mL with less than 9% relative standard deviation, implying the sensitive and reliable analysis of developed icELISA. In addition, high accuracy of the icELISA was supported by the results of spiked-and-recovery tests, ranging from 100.2 to 102.3%. Therefore, Fab could be utilized reliably for icELISA instead of the more expensive MAb. Collectively, this approach improved productivity of Fab and reduced the cost of antibody production.     

Advanced analyses of kinetic stabilities of iggs modified by mutations and glycosylation

The stability of Immunoglobulin G (IgG) affects production, storage and usability, especially in the clinic. The complex thermal and isothermal transitions of IgGs, especially their irreversibilities, pose a challenge to the proper determination of parameters describing their thermodynamic and kinetic stability. Here, we present a reliable mathematical model to study the irreversible thermal denaturations of antibody variants. The model was applied to two unrelated IgGs and their variants with stabilizing mutations as well as corresponding non‐glycosylated forms of IgGs and Fab fragments. Thermal denaturations of IgGs were analyzed with three transitions, one reversible transition corresponding to C_H2 domain unfolding followed by two consecutive irreversible transitions corresponding to Fab and C_H3 domains, respectively. The parameters obtained allowed us to examine the effects of these mutations on the stabilities of individual domains within the full‐length IgG. We found that the kinetic stability of the individual Fab fragment is significantly lowered within the IgG context, possibly because of intramolecular aggregation upon heating, while the stabilizing mutations have an especially beneficial effect. Thermal denaturations of non‐glycosylated variants of IgG consist of more than three transitions and could not be analyzed by our model. However, isothermal denaturations demonstrated that the lack of glycosylation affects the stability of all and not just of the C_H2 domain, suggesting that the partially unfolded domains may interact with each other during unfolding. Investigating thermal denaturation of IgGs according to our model provides a valuable tool for detecting subtle changes in thermodynamic and/or kinetic stabilities of individual domains.     

Constant domain-exchanged Fab enables specific light chain pairing in heterodimeric bispecific SEED-antibodies

BackgroundBispecific antibodies promise to broadly expand the clinical utility of monoclonal antibody technology. Several approaches for heterodimerization of heavy chains have been established to produce antibodies with two different Fab arms, but promiscuous pairing of heavy and light chains remains a challenge for their manufacturing.MethodsWe have designed a solution in which the C_H1 and C_L domain pair in one of the Fab fragments is replaced with a C_H3-domain pair and heterodimerized to facilitate correct modified Fab-chain pairing in bispecific heterodimeric antibodies based on a strand-exchange engineered domain (SEED) scaffold with specificity for epithelial growth factor receptor and either CD3 or CD16 (FcγRIII).ResultsBispecific antibodies retained binding to their target antigens and redirected primary T cells or NK cells to induce potent killing of target cells. All antibodies were expressed at a high yield in Expi293F cells, were detected as single sharp symmetrical peaks in size exclusion chromatography and retained high thermostability. Mass spectrometric analysis revealed specific heavy-to-light chain pairing for the bispecific SEED antibodies as well as for one-armed SEED antibodies co-expressed with two different competing light chains.ConclusionIncorporation of a constant domain-exchanged Fab fragment into a SEED antibody yields functional molecules with favorable biophysical properties.General significanceOur results show that the novel engineered bispecific SEED antibody scaffold with an incorporated Fab fragment with C_H3-exchanged constant domains is a promising tool for the generation of complete heterodimeric bispecific antibodies with correct light chain pairing.     

Construction of a large phage-displayed human antibody domain library with a scaffold based on a newly identified highly soluble, stable heavy chain variable domain

Currently, almost all U.S. Food and Drug Administration-approved therapeutic antibodies and the vast majority of those in clinical trials are full-size antibodies mostly in an immunoglobulin G1 format of about 150 kDa in size. Two fundamental problems for such large molecules are their poor penetration into tissues (e.g., solid tumors) and poor or absent binding to regions on the surface of some molecules [e.g., on the human immunodeficiency virus envelope glycoprotein (Env)] that are accessible by molecules of smaller size. We have identified a phage-displayed heavy chain-only antibody by panning of a large (size, ∼ 1.5 × 10¹⁰) human naive Fab (antigen-binding fragment) library against an Env and found that the heavy chain variable domain (V_H) of this antibody, designated as m0, was independently folded, stable, highly soluble, monomeric, and expressed at high levels in bacteria. m0 was used as a scaffold to construct a large (size, ∼ 2.5 × 10¹⁰), highly diversified phage-displayed human V_H library by grafting naturally occurring complementarity-determining regions (CDRs) 2 and 3 of heavy chains from five human antibody Fab libraries and by randomly mutating four putative solvent-accessible residues in CDR1 to A, D, S, or Y. The sequence diversity of all CDRs was determined from 143 randomly selected clones. Most of these V_Hs were with different CDR2 origins (six of seven groups of V_H germlines) or CDR3 lengths (ranging from 7 to 24 residues) and could be purified directly from the soluble fraction of the Escherichia coli periplasm. The quality of the library was also validated by successful selection of high-affinity V_Hs against viral and cancer-related antigens; all selected V_Hs were monomeric, easily expressed, and purified with high solubility and yield. This library could be a valuable source of antibodies targeting size-restricted epitopes and antigens in obstructed locations where efficient penetration could be critical for successful treatment.     

Affinity maturation increases the stability and plasticity of the Fv domain of anti-protein antibodies

The somatic mutations accumulated in variable and framework regions of antibodies produce structural changes that increase the affinity towards the antigen. This implies conformational and non covalent bonding changes at the paratope, as well as possible quaternary structure changes and rearrangements at the V_H-V_L interface. The consequences of the affinity maturation on the stability of the Fv domain were studied in a system composed of two closely related antibodies, F10.6.6 and D44.1, which recognize the same hen egg-white lysozyme (HEL) epitope. The mAb F10.6.6 has an affinity constant 700 times higher than D44.1, due to a higher surface complementarity to HEL. The structure of the free form of the Fab F10.6.6 presented here allows a comparative study of the conformational changes produced upon binding to antigen. By means of structural comparison, kinetics and thermodynamics of binding and stability studies on Fab and Fv fragments of both antibodies, we have determined that the affinity maturation process of anti-protein antibodies affects the shape of the combining site and the secondary structure content of the variable domain, stabilizes the V_H-V_L interaction, and consequently produces an increase of the Fv domain stability, improving the binding to antigen.     

De Novo Selection of High-Affinity Antibodies from Synthetic Fab Libraries Displayed on Phage as pIX Fusion Proteins

Filamentous phage was the first display platform employed to isolate antibodies in vitro and is still the most broadly used. The success of phage display is due to its robustness, ease of use, and comprehensive technology development, as well as a broad range of selection methods developed during the last two decades. We report here the first combinatorial synthetic Fab libraries displayed on pIX, a fusion partner different from the widely used pIII. The libraries were constructed on four V_L and three V_H domains encoded by IGV and IGJ germ-line genes frequently used in human antibodies, which were diversified to mirror the variability observed in the germ-line genes and antibodies isolated from natural sources. Two sets of libraries were built, one with diversity focused on V_H by keeping V_L in the germ-line gene configuration and the other with diversity in both V domains. After selection on a diverse panel of proteins, numerous specific Fabs with affinities ranging from 0.2 nM to 20 nM were isolated. V_H diversity was sufficient for isolating Fabs to most antigens, whereas variability in V_L was required for isolation of antibodies to some targets. After the application of an integrated maturation process consisting of reshuffling V_L diversity, the affinity of selected antibodies was improved up to 100-fold to the low picomolar range, suitable for in vivo studies. The results demonstrate the feasibility of displaying complex Fab libraries as pIX fusion proteins for antibody discovery and optimization and lay the foundation for studies on the structure-function relationships of antibodies.     

Structure-based stability engineering of the mouse IgG1 Fab fragment by modifying constant domains

A semi-rational approach based on structural data was exploited in a search for CH1 and CL domains with improved intrinsic thermodynamic stabilities. Structural and amino acid level comparisons were carried out against known biophysically well-behaving and thermodynamically beneficial scFv and Fab fragments. A number of mutant Fab fragments were constructed by site-directed mutagenesis of regions in the CH1 and CL domains expected to be most sensitive under physical stress conditions. These mutations were located on three sites in the Fab constant domains; a mobile loop in the CH1 domain, residues surrounding the two largest solvated hydrophobic cavities located in the interface of the CH1 and CL domains and the hydrophobic core regions of both CH1 and CL. Expression levels of functional Fab fragments, denaturant-induced unfolding equilibria and circular dichroism spectroscopy were used to evaluate the relative stabilities of the wild-type and the mutant Fab fragments. The highest thermodynamic stability was reached through the mutation strategy, where the hydrophobicity and the packing density of the solvated hydrophobic cavity in the CH1/CL interface was increased by the replacement of the hydrophilic Thr178 in the CL domain by a more hydrophobic residue, valine or isoleucine. The midpoint of the transition curve from native to unfolded states of the protein, measured by fluorescence emission, occurred at concentrations of guanidine hydrochloride of 2.4 M and 2.6 M for the wild-type Fab and the most stable mutants, respectively. Our results illustrate that point mutations targeted to the CH1/CL interface were advantageous for the overall thermodynamic stability of the Fab fragment.     

Three-Dimensional Structure of the Human Myeloma IgG2

Human immunoglobulin G, subclass 2 (hIgG2), plays an important role in immunity to bacterial pathogens and in numerous pathological conditions. However, there is a lack of information regarding the three-dimensional (3D) structure of the hIgG2 molecule. We used electron microscopy (EM), differential scanning microcalorimetry (DSC) and fluorescence for structural analysis of the hIgG2. DSC and fluorescence indicated two types of interaction between C_H1 domain of Fab (antigen-binding fragment/subunit) and C_H2 domain of Fc (complement fixation fragment/subunit) simultaneously present in the sample: close interaction, which increases the thermostability of both, C_H1 and C_H2 domains, and weak (or no) interaction, which is typical for most IgGs but not hIgG2. Thermodynamics could not determine if both types of interactions are present within a single molecule. To address this question, EM was used. We employed a single-particle reconstruction and negative staining approach to reveal the three-dimensional structure of the hIgG2. A three-dimensional model of hIgG2 was created at 1.78 nm resolution. The hIgG2 is asymmetrical: one Fab subunit is in close proximity to the upper portion of the Fc subunit (C_H2 domain) and the other Fab is distant from Fc. The plane of Fab subunits is nearly perpendicular to Fc. EM structure of the hIgG2 is in good agreement with thermodynamic data: a Fab distant from Fc should exhibit a lower melting temperature while a Fab interacting with Fc should exhibit a higher melting temperature. Both types of Fab subunits exist within one molecule resembling an A/B hIgG2 isoform introduced earlier on physicochemical level by Dillon et al. (2008). In such an arrangement, the access to the upper portion of Fc subunit is partially blocked by a Fab subunit. That might explain for instance why hIgG2 mildly activates complement and binds poorly to Fc receptors. Understanding of the three-dimensional structure of the hIgG2 should lead to better design of antibody-based therapeutics.     

Antibody Fab display system that can perform open-sandwich ELISA

Previously, immunological detection of small haptens or peptides was only possible in a competitive format, which needed competitor antigen either labeled by a reporter or attached to a carrier protein. Beside this, open-sandwich immunoassay (OS-IA) is a simple but powerful immunoassay that can noncompetitively determine monovalent antigen concentration by measuring the antigen-dependent increase in V_H/V_L interaction of an antibody. However, the procedure to obtain suitable assay reagents for OS-IA for a target antigen has not been straightforward because of the lack of easy-to-use antibody selection/manipulation methods. Here we devise a new Fab antibody phage display system that is useful for rapidly evaluating and selecting suitable antibody Fv fragments to OS-IA. The system is based on a phagemid vector in which two identical restriction sites were incorporated into both ends of a human constant region domain. After selection of the M13 phage displaying a Fab fragment, the vector can be easily converted to the vector that can simultaneously produce the V_H-displaying phage and the light chain in the culture supernatant, which can be directly used for OS-ELISA. The successful results of model selection as well as conversion to OS format show the potential in developing various OS-IA for clinically and environmentally important targets.     

Fully Human VH Single Domains That Rival the Stability and Cleft Recognition of Camelid Antibodies

Human V_H single domains represent a promising class of antibody fragments with applications as therapeutic modalities. Unfortunately, isolated human V_H domains also generally display poor biophysical properties and a propensity to aggregate. This has encouraged the development of non-human antibody domains as alternative means of antigen recognition and, in particular, camelid (V_HH) domains. Naturally devoid of light chain partners, these domains are characterized by favorable biophysical properties and propensity for cleft binding, a highly desirable characteristic, allowing the targeting of cryptic epitopes. In contrast, previously reported structures of human V_H single domains had failed to recapitulate this property. Here we report the engineering and characterization of phage display libraries of stable human V_H domains and the selection of binders against a diverse set of antigens. Unlike “camelized” human domains, the domains do not rely on potentially immunogenic framework mutations and maintain the structure of the V_H/V_L interface. Structure determination in complex with hen egg white lysozyme revealed an extended V_H binding interface, with complementarity-determining region 3 deeply penetrating into the active site cleft, highly reminiscent of what has been observed for camelid domains. Taken together, our results demonstrate that fully human V_H domains can be constructed that are not only stable and well expressed but also rival the cleft binding properties of camelid antibodies.     

Domain interactions in the Fab fragment: a comparative evaluation of the single-chain Fv and Fab format engineered with variable domains of different stability

Recombinant antibody fragments, most notably Fab and scFv, have become important tools in research, diagnostics and therapy. Since different recombinant antibody formats exist, it is crucial to understand the difference in their respective biophysical properties. We assessed the potential stability benefits of changing the scFv into the Fab format, the influence of the variable domains on the stability of the Fab fragment, and the influence of the interchain disulfide bond in the Fab fragment. To analyze domain interactions, the Fab fragment was broken down into its individual domains, several two-domain assemblies and one three-domain assembly. The equilibrium denaturation properties of these constructs were then compared to those of the Fab fragment. It was found that mutual stabilization occurred across the VH/VL and the CH1/CL interface, whereas the direct interaction between the V) and the CL domain had no influence on the stability of either domain. This observation can be explained by the different interfaces used for interaction. In contrast, the whole CH1CL and VHVL unit showed significant mutual stabilization, indicating a high degree of cooperation between the VH/VL and CH1/CL interface. The interchain disulfide bond in the Fab fragment plays an essential role in this stabilization. In addition to the effects of domain association on the thermodynamic (equilibrium) stability, Fab fragments differ from scFv fragments of similar equilibrium stability by having a very slow unfolding rate. This kinetic stabilization may increase significantly the resistance of Fab fragments against short time exposure to adverse conditions.     

Affinity maturation of a novel antagonistic human monoclonal antibody with a long VH CDR3 targeting the Class A GPCR formyl-peptide receptor 1

Therapeutic monoclonal antibodies targeting G-protein-coupled receptors (GPCRs) are desirable for intervention in a wide range of disease processes. The discovery of such antibodies is challenging due to a lack of stability of many GPCRs as purified proteins. We describe here the generation of Fpro0165, a human anti-formyl peptide receptor 1 (FPR1) antibody generated by variable domain engineering of an antibody derived by immunization of transgenic mice expressing human variable region genes. Antibody isolation and subsequent engineering of affinity, potency and species cross-reactivity using phage display were achieved using FPR1 expressed on HEK cells for immunization and selection, along with calcium release cellular assays for antibody screening. Fpro0165 shows full neutralization of formyl peptide-mediated activation of primary human neutrophils. A crystal structure of the Fpro0165 Fab shows a long, protruding V_H CDR3 of 24 amino acids and in silico docking with a homology model of FPR1 suggests that this long V_H CDR3 is critical to the predicted binding mode of the antibody. Antibody mutation studies identify the apex of the long V_H CDR3 as key to mediating the species cross-reactivity profile of the antibody. This study illustrates an approach for antibody discovery and affinity engineering to typically intractable membrane proteins such as GPCRs.     

Generation of anti-c-met single domain antibody fragment based on human stable frameworks

The size reduction is an important issue in the biomedical application of antibody and single domain antibody fragment is recognized as very attractive tool. However, it is very time-consuming and laborious to generate the fragment antibody with targeted binding function. Here, we investigated the possibility to prepare single domain antibody (sdAb) by a simple grafting method based on stable human consensus framework sequences. The complementarity determining region sequences in V_H domain of anti-c-Met scFv from rabbit were grafted with the human V_H3 consensus framework sequences, which generated the anti-c-Met single domain antibody showing almost same binding activity to its scFv form. The generated single domain antibody could be produced as functional form in oxidizing cytoplasm of E. coli, but produced as inactive form in reducing cytoplasm. The structural analysis of the homology models gave us the insight on the stability of the single domain antibody. In this report, we have demonstrated that the very stable human consensus framework sequence can be used for the generation of active anti-c-Met sdAb via complementarity determining regions grafting. We expect that this kind of grafting method for the generation of sdAb may provide us with the opportunities to prepare sdAbs based on the known antibody sequences.     

Studies in serum support rapid formation of disulfide bond between unpaired cysteine residues in the VH domain of an immunoglobulin G1 molecule

Recombinant monoclonal antibodies undergo extensive posttranslational modifications. In this article, we characterize major modifications, separated by cation exchange chromatography, on an immunoglobulin G1 (IgG1) monoclonal antibody (mAb). We found that N-terminal cyclization of glutamine residues to pyroglutamate on the light and heavy chains are the major isoforms resolved during cation exchange chromatography. However, using CEX, we also separated and identified isoforms with unpaired cysteine residues in the V_H domain of the molecule (Cys22-Cys96). Omalizumab, a therapeutic anti-IgE antibody, has unpaired cysteine residues in the V_H domain between Cys22 and Cys96, and the Fab fragment, containing the unpaired cysteine residues, is reported to have reduced potency. Dynamic interchain disulfide rearrangement, with slow kinetics, was recently reported to take place in serum for an IgG2 molecule and resulted in predictable mature isoforms. Analytical evaluation of our mAb, after recovery from serum, revealed that the unpaired intrachain cysteine residues (Cys22-Cys96) reformed their disulfide bond. The significance of this study is that correct pairing occurred rapidly, and we speculate that thiol molecules such as cysteine, homocysteine, and glutathione in serum provide an environment, outside the endoplasmic reticulum, for correct linkage.