Increased folding stability of TEM-1 beta-lactamase by in vitro selection

In vitro selections of stabilized proteins lead to more robust enzymes and, at the same time, yield novel insights into the principles of protein stability. We employed Proside, a method of in vitro selection, to find stabilized variants of TEM-1 β-lactamase from Escherichia coli. Proside links the increased protease resistance of stabilized proteins to the infectivity of a filamentous phage. Several libraries of TEM-1 β-lactamase variants were generated by error-prone PCR, and variants with increased protease resistance were obtained by raising temperature or guanidinium chloride concentration during proteolytic selections. Despite the small size of phage libraries, several strongly stabilizing mutations could be obtained, and a manual combination of the best shifted the profiles for thermal unfolding and temperature-dependent inactivation of β-lactamase by almost 20 °C to a higher temperature. The wild-type protein unfolds in two stages: from the native state via an intermediate of the molten-globule type to the unfolded form. In the course of the selections, the native protein was stabilized by 27 kJ mol^− 1 relative to the intermediate and the cooperativity of unfolding was strongly increased. Three of our stabilizing replacements (M182T, A224V, and R275L) had been identified independently in naturally occurring β-lactamase variants with extended substrate spectrum. In these variants, they acted as global suppressors of destabilizations caused by the mutations in the active site. The comparison between the crystal structure of our best variant and the crystal structure of the wild-type protein indicates that most of the selected mutations optimize helices and their packing. The stabilization by the E147G substitution is remarkable. It removes steric strain that originates from an overly tight packing of two helices in the wild-type protein. Such unfavorable van der Waals repulsions are not easily identified in crystal structures or by computational approaches, but they strongly reduce the conformational stability of a protein.     

CBM21 starch-binding domain: A new purification tag for recombinant protein engineering

The use of protein fusion tag technology simplifies and facilitates purification of recombinant proteins. In this article, we have found that the starch-binding domain derived from Rhizopus oryzae glucoamylase (RoSBD), a member of carbohydrate-binding module family 21 (CBM21) with raw starch-binding activity, is favorable to be applied as an affinity tag for fusion protein engineering and purification in Escherichia coli and Pichia pastoris systems. To determine suitable spatial arrangement of RoSBD as a fusion handle, enhanced green fluorescent protein (eGFP) was fused to either the N- or C-terminus of the SBD, expressed by E. coli, and purified for yield assessment and functional analysis. Binding assays showed that the ligand-binding capacity was fully retained when the RoSBD was engineered at either the N-terminal or the C-terminal end. Similar results have been obtained with the RoSBD-conjugated phytase secreted by P. pastoris. The effective adsorption onto raw starch and low cost of starch make RoSBD practically applicable in terms of development of a new affinity fusion tag for recombinant protein engineering in an economic manner.     

Functional studies with membrane-bound and detergent-solubilized α2-adrenergic receptors expressed in Sf9 cells

A chip-based biosensor technology using surface plasmon resonance (SPR) was developed for studying the interaction of ligands and G protein-coupled receptors (GPCRs). GPCRs, the fourth largest superfamily in the human genome, are the largest class of targets for drug discovery.We have expressed the three subtypes of α₂-adrenergic receptor (α₂-AR), a prototypical GPCR as functional fusion proteins in baculovirus-infected insect cells. The localization of the expressed receptor was observed in intracellular organelles, as detected by eGFP fluorescence. In addition, the deletion mutants of α_2B-AR, with a deletion in the 3rd intracellular loop, exhibited unaltered K_d values and enhanced stability, thus making them more promising candidates for crystallization. SPR demonstrated that small molecule ligands can bind the detergent-solubilized receptor, thus proving that α₂-AR is active even in a lipid-free environment. The K_d values obtained from the biosensor analysis and traditional ligand binding studies correlate well with each other. This is the first demonstration of the binding of a small molecule to the detergent-solubilized state of α₂-ARs and interaction of low-molecular mass-ligands in real time in a label-free environment. This technology will also allow the development of high throughput platform for screening a large number of compounds for generation of leads.     

An effective peptide screening system using recombinant fluorescent bacterial surface display

An effective method for peptide screening of ligand-binding proteins was applied by using recombinant E. coli which is capable of expressing green fluorescent protein (GFP) and which can also express random peptides displayed on flagella of the cells. This screening method used a combination of fluorescence-activated cell sorting (FACS) and flagella display on the basis of a commercial FliTrx random peptide library for isolating the peptide-displaying clones which are able to bind Alexa 546 fluorescence-labeled cytochrome c. Flow cytometry simultaneously detected the two different fluorescence intensities, from GFP in the library and Alexa546-labeled to cytochrome c, enabling the specific clones bound to cytochrome c to be obtained from the first or second round of cell sorting. Compared with original FliTrx peptide screening system that requires repeating biopanning five times, our results suggested that detecting two different fluorescence intensities by flow cytometry is feasible for effective peptide screening.     

High-throughput Sorting of an Anticalin Library via EspP-mediated Functional Display on the Escherichia coli Cell Surface

We demonstrate that small engineered single-chain binding proteins based on the lipocalin scaffold, so-called Anticalins, can be functionally displayed on the Gram-negative bacterial cell envelope. To this end, the β-domains of five different bacterial autotransporters (the IgA protease from Neisseria gonorrhoeae, the esterase EstA from Pseudomonas aeruginosa, the YpjA autotransporter from E. coli K12, the AIDA-I adhesin from enteropathogenic E. coli O127:H27 strain 2787 and the protease EspP from enterohemorrhagic E. coli O157:H7 strain EDL933) were compared with respect to display level, functional variance, and bacterial cell viability. Use of the EspP autotransporter led to a system with high genetic stability for the display of fully functional Anticalins in high density on the cell surface of E. coli as shown by quantitative flow cytofluorimetry. This system was applied to engineer an immunostimulatory Anticalin that binds and blocks the extracellular region of human CTLA-4 to achieve a slower dissociation rate. A combinatorial library of the original Anticalin was generated by error-prone PCR, subjected to E. coli cell surface display, and applied to repeated cycles of cell sorting after incubation with the fluorescently labelled target protein under competition with the unlabelled extracellular domain of CTLA-4. The resulting Anticalin variants, which were expressed and purified as soluble proteins, showed more than eightfold decelerated target dissociation, as revealed by real time surface plasmon resonance analysis. Hence, the EspP autotransporter-mediated E. coli surface display in combination with high-throughput fluorescence-activated cell sorting (FACS) provides an efficient strategy to select for Anticalins, and possibly other small protein scaffolds, with improved binding properties, which is particularly useful for in vitro affinity maturation but may also serve for the selection of novel target specificity from naive libraries.     

A proteasome assembly defect in rpn3 mutants is associated with Rpn11 instability and increased sensitivity to stress

Rpn11 is a proteasome-associated deubiquitinating enzyme that is essential for viability. Recent genetic studies showed that Rpn11 is functionally linked to Rpn10, a major multiubiquitin chain binding receptor in the proteasome. Mutations in Rpn11 and Rpn10 can reduce the level and/or stability of proteasomes, indicating that both proteins influence its structural integrity. To characterize the properties of Rpn11, we examined its interactions with other subunits in the 19S regulatory particle and detected strong binding to Rpn3. Two previously described rpn3 mutants are sensitive to protein translation inhibitors and an amino acid analog. These mutants also display a mitochondrial defect. The abundance of intact proteasomes was significantly reduced in rpn3 mutants, as revealed by strongly reduced binding between 20S catalytic with 19S regulatory particles. Proteasome interaction with the shuttle factor Rad23 was similarly reduced. Consequently, higher levels of multiUb proteins were associated with Rad23, and proteolytic substrates were stabilized. The availability of Rpn11 is important for maintaining adequate levels of intact proteasomes, as its depletion caused growth and proteolytic defects in rpn3. These studies suggest that Rpn11 is stabilized following its incorporation into proteasomes. The instability of Rpn11 and the defects of rpn3 mutants are apparently caused by a failure to recruit Rpn11 into mature proteasomes.     

Method to increase the yield of eukaryotic membrane protein expression in Saccharomyces cerevisiae for structural and functional studies

Despite recent successes in the structure determination of eukaryotic membrane proteins, the total number of structures of these important proteins is severely underrepresented in the Protein Data Bank. Although prokaryotic homologues provide valuable mechanistic insight, they often lack crucial details, such as post-translational modification and additional intra or extracellular domains that are important for understanding the function and regulation of these proteins in eukaryotic cells. The production of milligram quantities of recombinant protein is still a serious obstacle to the structural and functional characterization of these proteins. Here, we report a modification to a previously described over expression system using the simple eukaryote Saccharomyces cerevisiae that can increase overall protein yield and improve downstream purification procedures. Using a metabolic marker under the control of a truncated promoter, we show that expression levels for several membrane transporters are increased fourfold. We further demonstrate that the increase in expression for our test proteins resulted in a concomitant increase in functional protein. Using this system, we were able to increase the expression level of a plant transporter, NRT1.1, which was a key factor in its structural and functional characterization.     

Low-Level Expression of a Folding-Incompetent Protein in Escherichia coli: Search for the Molecular Determinants of Protein Aggregation In Vivo

Aggregation of peptides and proteins into insoluble amyloid fibrils or related intracellular inclusions is the hallmark of many degenerative diseases, including Alzheimer's disease, Parkinson's disease, and various forms of amyloidosis. In spite of the considerable progress carried out in vitro in elucidating the molecular determinants of the conversion of purified and isolated proteins into amyloid fibrils, very little is known on factors governing this process in the complex environment of living organisms. Taking advantage of increasing evidence that bacterial inclusion bodies consist of amyloid-like aggregates, we have expressed in Escherichia coli both wild type and 21 single-point mutants of the N-terminal domain of the E. coli protein HypF. All variants were expressed as folding-incompetent units in a controlled manner, at low and comparable levels. Their solubilities were measured by quantifying the protein amount contained in the soluble and insoluble fractions by Western blot analysis. A significant negative correlation was found between the solubility of the variants in E. coli and their intrinsic propensity to form amyloid fibrils, predicted using an algorithm previously validated experimentally in vitro on a number of unfolded peptides and proteins, and considering hydrophobicity, β-sheet propensity, and charge as major sequence determinants of the aggregation process. These findings show that the physicochemical parameters previously recognized to govern amyloid formation by fully or partially unfolded proteins are largely applicable in vivo and pave the way for the molecular exploration of a process as complex as protein aggregation in living organisms.     

Engineering of an Orthogonal Aminoacyl-tRNA Synthetase for Efficient Incorporation of the Non-natural Amino Acid O-Methyl-L-tyrosine using Fluorescence-based Bacterial Cell Sorting

We describe a strategy for the rapid selection of mutant aminoacyl-tRNA synthetases (aaRS) with specificity for a novel amino acid based on fluorescence-activated cell sorting of transformed Escherichia coli using as reporter the enhanced green fluorescent protein (eGFP) whose gene carries an amber stop codon (TAG) at a permissive site upstream of the fluorophore. To this end, a one-plasmid expression system was developed encoding an inducible modified Methanocaldococcus jannaschii (Mj) tyrosyl-tRNA synthetase, the orthogonal cognate suppressor tRNA, and eGFP_UAG in an individually regulatable fashion. Using this system a previously described aaRS with specificity for O-methyl-L-tyrosine (MeTyr) was engineered for 10-fold improved incorporation of the foreign amino acid by selection from a mutant library, prepared by error-prone as well as focused random mutagenesis, for MeTyr-dependent eGFP fluorescence. Applying alternating cycles of positive and negative fluorescence-activated bacterial cell sorting in the presence or in the absence, respectively, of the foreign amino acid was crucial to select for high specificity of MeTyr incorporation. The optimized synthetase was used for the preparative expression of a modified uvGFP carrying MeTyr at position 66 as part of its fluorophore. This biosynthetic protein showed quantitative incorporation of the non-natural amino acid, as determined by mass spectrometry, and it revealed a unique emission spectrum due to the altered chemical structure of its fluorophore. Our combined genetic/selection system offers advantages over earlier approaches that relied wholly or in part on antibiotic selection schemes, and it should be generally useful for the engineering and optimization of orthogonal aaRS/tRNA pairs to incorporate non-natural amino acids into recombinant proteins.     

Phospholipid requirement and pH optimum for the in vitro enzymatic activity of the E. coli P-type ATPase ZntA

Detergent solubilization and purification of the E. coli heavy metal P-type ATPase ZntA yields an enzyme with reduced hydrolytic activity in vitro. Here, it is shown that the in vitro hydrolytic activity of detergent solubilized ZntA is increased in the presence of negatively charged phospholipids and at slightly acidic pH. The protein-lipid interaction of ZntA was characterized by enzyme-coupled ATPase assays and fluorescence spectroscopy. Among the most abundant naturally occurring phospholipids, only phosphatidyl-glycerol lipids (PG) enhance the in vitro enzymatic ATPase activity of ZntA. Re-lipidation of detergent purified ZntA with 1,2-dioleoylphosphatidyl-glycerol (DOPG) increases the ATPase activity four-fold compared to the purified state. All other E. coli phospholipids fail to activate the ATPase. Among the phosphatidyl-glycerol family, highest activity was observed for 1,2-dioleoyl-PG followed by 1,2-dimyristoyl-PG, 1,2-dipalmitoyl-PG and 1,2-distearoyl-PG. Increasing intrinsic Trp fluorescence quantum yield upon relipidation of ZntA was used to determine a pH maximum for lipid binding at pH 6.7. The pH dependence of the lipid binding was confirmed by pH-dependent ATPase assays showing maximum activity at pH 6.7. The biophysical characterization of detergent solubilized membrane proteins crucially relies on the conformational stability and functional integrity of the protein under investigation. The present study describes how the E. coli ZntA P-type ATPase can be stabilized and functionally activated in a detergent solubilized system.     

Hypothalamic vasopressin response to stress and various physiological stimuli: visualization in transgenic animal models

Arginine vasopressin (AVP) is involved in the homeostatic responses numerous life-threatening conditions, for example, the promotion of water conservation during periods of dehydration, and the activation of the hypothalamo-pituitary adrenal axis by emotional stress. Recently, we generated new transgenic animals that faithfully express an AVP-enhanced green fluorescent protein (eGFP) fusion gene in the paraventricular nucleus (PVN), the supraoptic nucleus (SON) and the suprachiasmatic nucleus (SCN) of the hypothalamus. In these transgenic rats, marked increases in eGFP fluorescence and fusion gene expression were observed in the magnocellular division of the PVN and the SON, but not the SCN, after osmotic challenges, such as dehydration and salt loading, and both acute and chronic nociceptive stimuli. In the parvocellular division of the PVN, eGFP expression was increased after acute and chronic pain, bilateral adrenalectomy, endotoxin shock and restraint stress. In the extra-hypothalamic areas of the brain, eGFP expression was induced in the locus coeruleus after the intracerebroventricular administration of colchicine. Next, we generated another transgenic rat that expresses a fusion gene comprised of c-fos promoter-enhancer sequences driving the expression of monomeric red fluorescent protein 1 (mRFP1). In these transgenic rats, abundant nuclear fluorescence of mRFP1 was observed in the PVN, the SON and other osmosensitive areas after acute osmotic stimulation. Finally, we generated a double transgenic rat that expresses both the AVP-eGFP and c-fos-mRFP1 fusion genes. In this double transgenic rat, we have observed nuclear mRFP1 fluorescence in eGFP-positive neurons after acute osmotic stimulation. These unique transgenic rats provide an exciting new tool to examine neuroendocrine responses to physiological and stressful stimuli in both in vivo and in vitro preparations.     

Evolution of three human GPCRs for higher expression and stability

We recently developed a display method for the directed evolution of integral membrane proteins in the inner membrane of Escherichia coli for higher expression and stability. For the neurotensin receptor 1, a G-protein-coupled receptor (GPCR), we had evolved a mutant with a 10-fold increase in functional expression that largely retains wild-type binding and signaling properties and shows higher stability in detergent-solubilized form. We have now evolved three additional human GPCRs. Unmodified wild-type receptor cDNA was subjected to successive cycles of mutagenesis and fluorescence-activated cell sorting, and functional expression could be increased for all three GPCR targets. We also present a new stability screening method in a 96-well assay format to quickly identify evolved receptors showing increased thermal stability in detergent-solubilized form and rapidly evaluate them quantitatively. Combining the two methods turned out to be very powerful; even for the most challenging GPCR target—the tachykinin receptor NK₁, which is hardly expressed in E. coli and cannot be functionally solubilized—receptor mutants that are functionally expressed at 1 mg/l levels in E. coli and are stable in detergent solution could be quickly evolved. The improvements result from cumulative small changes in the receptor sequence. This combinatorial approach does not require preconceived notions for designing mutations. Our results suggest that this method is generally applicable to GPCRs. Existing roadblocks in structural and biophysical studies can now be removed by providing sufficient quantities of correctly folded and stable receptor protein.     

FRET-based in vivo screening for protein folding and increased protein stability

Fluorescence resonance energy transfer (FRET) was used to establish a novel in vivo screening system that allows rapid detection of protein folding and protein variants with increased thermodynamic stability in the cytoplasm of Escherichia coli. The system is based on the simultaneous fusion of the green fluorescent protein (GFP) to the C terminus of a protein X of interest, and of blue-fluorescent protein (BFP) to the N terminus of protein X. Efficient FRET from BFP to GFP in the ternary fusion protein is observed in vivo only when protein X is folded and brings BFP and GFP into close proximity, while FRET is lost when BFP and GFP are far apart due to unfolding or intracellular degradation of protein X. The screening system was validated by identification of antibody V(L) intradomains with increased thermodynamic stabilities from expression libraries after random mutagenesis, bacterial cell sorting, and colony screening.     

Characterization of the functional role of the N-glycans in the AMPA receptor ligand-binding domain

The ligand-binding domains of AMPA receptor subunits carry two conserved N-glycosylation sites. In order to gain insight into the functional role of the corresponding N-glycans, we examined how the elimination of glycosylation at these sites (N407 and N414) affects the ligand-binding characteristics, structural stability, cell-surface expression, and channel properties of homomeric GluR-D (GluR4) receptor and its soluble ligand-binding domain (S1S2). GluR-D S1S2 protein expressed as a secreted protein in insect cells was found to be glycosylated at N407 and N414. No major differences in the ligand-binding properties were observed between the 'wild-type' S1S2 and non-glycosylated N407D/N414Q double mutant, or between S1S2 proteins expressed in the presence or absence of tunicamycin, an inhibitor of N-glycosylation. Purified glycosylated and non-glycosylated S1S2 proteins also showed similar thermostabilities as determined by CD spectroscopy. Full-length homomeric GluR-D receptor with N407D/N414Q mutation was expressed on the surface of HEK293 cells like the wild-type GluR-D. In outside-out patches, GluR-D and the N407D/N414Q mutant produced similar rapidly desensitizing current responses to glutamate and AMPA. We therefore report that the two conserved ligand-binding domain glycans do not play any major role in receptor-ligand interactions, do not impart a stabilizing effect on the ligand-binding domain, and are not critical for the formation and surface localization of homomeric GluR-D AMPA receptors in HEK293 cells.     

Dimer Formation of a Stabilized Gβ1 Variant: A Structural and Energetic Analysis

In previous work, a strongly stabilized variant of the β1 domain of streptococcal protein G (Gβ1) was obtained by an in vitro selection method. This variant, termed Gβ1-M2, contains the four substitutions E15V, T16L, T18I, and N37L. Here we elucidated the molecular basis of the observed strong stabilizations. The contributions of these four residues were analyzed individually and in various combinations, additional selections with focused Gβ1 gene libraries were performed, and the crystal structure of Gβ1-M2 was determined. All single substitutions (E15V, T16L, T18I, and N37L) stabilize wild-type Gβ1 by contributions of between 1.6 and 6.0 kJ mol^− 1 (at 70 °C). Hydrophobic residues at positions 16 and 37 provide the major contribution to stabilization by enlarging the hydrophobic core of Gβ1. They also increase the tendency to form dimers, as shown by dependence on the concentration of apparent molecular mass in analytical ultracentrifugation, by concentration-dependent stability, and by a strongly increased van't Hoff enthalpy of unfolding. The 0.88-Å crystal structure of Gβ1-M2 and NMR measurements in solution provide the explanation for the observed dimer formation. It involves a head-to-head arrangement of two Gβ1-M2 molecules via six intermolecular hydrogen bonds between the two β strands 2 and 2′ and an adjacent self-complementary hydrophobic surface area, which is created by the T16L and N37L substitutions and a large 120° rotation of the Tyr33 side chain. This removal of hydrophilic groups and the malleability of the created hydrophobic surface provide the basis for the dimer formation of stabilized Gβ1 variants.