Most-Probable-Number Rapid Viability PCR method to detect viable spores of Bacillus anthracis in swab samples

A comparison of Most-Probable-Number Rapid Viability (MPN RV) PCR and traditional culture methods for the quantification of Bacillus anthracis Sterne spores in macrofoam swabs from a multi-center validation study was performed. The purpose of the study was to compare environmental swab processing methods for recovery, detection, and quantification of viable B. anthracis spores from surfaces. Results show that spore numbers provided by the MPN RV-PCR method were typically within 1-log of the values from a plate count method for all three levels of spores tested (3.1 × 10⁴, 400, and 40 spores sampled from surfaces with swabs) even in the presence of debris. The MPN method tended to overestimate the expected result, especially at lower spore levels. Blind negative samples were correctly identified using both methods showing a lack of cross contamination. In addition to detecting low levels of spores in environmental conditions, the MPN RV-PCR method is specific, and compatible with automated high-throughput sample processing and analysis protocols, enhancing its utility for characterization and clearance following a biothreat agent release.     

Methylation-dependent DNA restriction in Bacillus anthracis

Bacillus anthracis, the causative agent of anthrax, is poorly transformed with DNA that is methylated on adenine or cytosine. Here we characterize three genetic loci encoding type IV methylation-dependent restriction enzymes that target DNA containing C5-methylcytosine (m5C). Strains in which these genes were inactivated, either singly or collectively, showed increased transformation by methylated DNA. Additionally, a triple mutant with an ~ 30-kb genomic deletion could be transformed by DNA obtained from Dam⁺Dcm⁺E. coli, although at a low frequency of ~ 10^− 3 transformants/10⁶ cfu. This strain of B. anthracis can potentially serve as a preferred host for shuttle vectors that express recombinant proteins, including proteins to be used in vaccines. The gene(s) responsible for the restriction of m6A-containing DNA in B. anthracis remain unidentified, and we suggest that poor transformation by such DNA could in part be a consequence of the inefficient replication of hemimethylated DNA in B. anthracis.     

A multiplex bead-based suspension array assay for interrogation of phylogenetically informative single nucleotide polymorphisms for Bacillus anthracis

Single nucleotide polymorphisms (SNPs) are abundant in genomes of all species and represent informative DNA markers extensively used to analyze phylogenetic relationships between strains. Medium to high throughput, open methodologies able to test many SNPs in a minimum time are therefore in great need. By using the versatile Luminex® xTAG technology, we developed an efficient multiplexed SNP genotyping assay to score 13 phylogenetically informative SNPs within the genome of Bacillus anthracis. The Multiplex Oligonucleotide Ligation-PCR procedure (MOL-PCR) described by Deshpande et al., 2010 has been modified and adapted for simultaneous interrogation of 13 biallelic canonical SNPs in a 13-plex assay. Changes made to the originally published method include the design of allele-specific dual-priming-oligonucleotides (DPOs) as competing detection probes (MOLigo probes) and use of asymmetric PCR reaction for signal amplification and labeling of ligation products carrying SNP targets. These innovations significantly reduce cross-reactivity observed when initial MOLigo probes were used and enhance hybridization efficiency onto the microsphere array, respectively. When evaluated on 73 representative samples, the 13-plex assay yielded unambiguous SNP calls and lineage affiliation. Assay limit of detection was determined to be 2 ng of genomic DNA. The reproducibility, robustness and easy-of-use of the present method were validated by a small-scale proficiency testing performed between four European laboratories. While cost-effective compared to other singleplex methods, the present MOL-PCR method offers a high degree of flexibility and scalability. It can easily accommodate newly identified SNPs to increase resolving power to the canSNP typing of B. anthracis.     

Identification of fibrillin-1 gene mutations in Marfan syndrome by high-resolution melting analysis

Marfan syndrome has been associated with approximately 562 mutations in the fibrillin-1 (FBN1) gene. Mutation scanning of the FBN1 gene with DNA direct sequencing is time-consuming and expensive because of its large size. This study analyzed the diagnostic value of high-resolution melting analysis as an alternative method for scanning of the FBN1 gene. A total of 75 polymerase chain reaction (PCR) amplicons (179-301 bp, average 256 bp) that covered the complete coding regions and splicing sites were evaluated on the 96-well LightCycler system. Melting curves were analyzed as fluorescence derivative plots (−dF/dT vs. temperature). To determine the sensitivity of this method, a total of 82 samples from patients with Marfan syndrome and 50 unaffected individuals were analyzed. All mutations reported in this study had been confirmed previously by direct sequencing analysis. Melting analysis identified 48 heterozygous variants. The variant c.3093 G>T (exon 25) was incorrectly identified by melting curve analysis. The sensitivity of the technique in this sample was 98.78% (81/82). This study demonstrated that high-resolution melting analysis is a reliable gene scanning method with greater speed than DNA sequencing. Our results support the use of this technology as an alternative method for the diagnosis of Marfan syndrome as well as its suitability for high-throughput mutation scanning of other large genes.     

Rapid Detection and Identification of Wuchereria bancrofti,Brugia malayi,B. pahangi,and Dirofilaria immitis in Mosquito Vectors and Blood Samples by High Resolution Melting Real-Time PCR

A simple, rapid, and high-throughput method for detection and identification of Wuchereria bancrofti, Brugia malayi, Brugia pahangi, and Dirofilaria immitis in mosquito vectors and blood samples was developed using a real-time PCR combined with high-resolution melting (HRM) analysis. Amplicons of the 4 filarial species were generated from 5S rRNA and spliced leader sequences by the real-time PCR and their melting temperatures were determined by the HRM method. Melting of amplicons from W. bancrofti, B. malayi, D. immitis, and B. pahangi peaked at 81.5±0.2℃, 79.0±0.3℃, 76.8±0.1℃, and 79.9±0.1℃, respectively. This assay is relatively cheap since it does not require synthesis of hybridization probes. Its sensitivity and specificity were 100%. It is a rapid and technically simple approach, and an important tool for population surveys as well as molecular xenomonitoring of parasites in vectors.     

Sample-to-SNP kit: A reliable,easy and fast tool for the detection of HFE p.H63D and p.C282Y variations associated to hereditary hemochromatosis

Classical hereditary hemochromatosis involves the HFE-gene and diagnostic analysis of the DNA variants HFE p.C282Y (c.845G > A; rs1800562) and HFE p.H63D (c.187C > G; rs1799945). The affected protein alters the iron homeostasis resulting in iron overload in various tissues. The aim of this study was to validate the TaqMan-based Sample-to-SNP protocol for the analysis of the HFE-p.C282Y and p.H63D variants with regard to accuracy, usefulness and reproducibility compared to an existing SNP protocol. The Sample-to-SNP protocol uses an approach where the DNA template is made accessible from a cell lysate followed by TaqMan analysis. Besides the HFE-SNPs other eight SNPs were used as well. These SNPs were: Coagulation factor II-gene F2 c.20210G > A, Coagulation factor V-gene F5 p.R506Q (c.1517G > A; rs121917732), Mitochondria SNP: mt7028 G > A, Mitochondria SNP: mt12308 A > G, Proprotein convertase subtilisin/kexin type 9-gene PCSK9 p.R46L (c.137G > T), Plutathione S-transferase pi 1-gene GSTP1 p.I105V (c313A > G; rs1695), LXR g.-171 A > G, ZNF202 g.-118 G > T. In conclusion the Sample-to-SNP kit proved to be an accurate, reliable, robust, easy to use and rapid TaqMan-based SNP detection protocol, which could be quickly implemented in a routine diagnostic or research facility.     

SNP exploring in the middle and terminal regions of the IGF-1 gene and association with production and reproduction traits in Holstein cattle

Five primer sets were designed in order to identify single nucleotide polymorphisms (SNPs) in middle and terminal exons (2 to 6) and in some flanking intronic regions of the bovine insulin-like growth factor 1 (IGF-1) gene. Sequencing results of PCR products for 10% of animals showed no variant in exons but a SNP at intron 4 was occurred. Both polymerase chain reaction–restriction fragment length polymorphism (PCR–RFLP) and high resolution melting (HRM) methods were developed to genotype samples. The PCR–RFLP results showed the presence of three fragments on agarose gel for the C allele due to two cleavage sites while two fragments for the T allele were observed. Melting curves of 123 bp fragments in HRM analysis showed a difference between temperature melting (T_m) of two homozygous genotypes as the CC genotypes had higher T_m than the TT genotypes. Melting curve of the CT genotype was different and crossed two parallel patterns of homozygous genotypes. The frequencies of the CC, CT and TT genotypes were 0.6, 0.37 and 0.03, respectively. Also, the estimated allele frequencies were 0.785 and 0.215 for the C and T alleles, respectively. Results showed higher accuracy of the HRM analysis compared to the PCR–RFLP method. Least square means (LSMs) comparison of the different genotypes in the SNP showed significant association with milk fat yield trait in the first lactation and open days after the second calving. The polymorphism did not have a significant effect on other milk production or reproduction traits. It seems that other variants or QTLs known in this region underlie genetic variation in the production and reproduction of dairy cattle.     

Simultaneous detection of Giardia lamblia and Cryptosporidium parvum (oo)cysts in soil using immunomagnetic separation and direct fluorescent antibody staining

An improved approach for simultaneous detection of Cryptosporidium parvum and Giardia lamblia (oo)cysts in soil is described. Recoveries > 70% were obtained for concentrations > 55 and 21 (oo)cysts g ⁻¹ for C. parvum and G. lamblia, respectively. The limits of detection were determined to be < 5 (oo)cysts g ⁻¹ soil.     

A duplex-PCR method for species- and pathovar-level identification and detection of the quarantine plant pathogen Xanthomonas arboricola pv. pruni

A PCR-based method was developed for the stone fruit quarantine pathogen Xanthomonas arboricola pv. pruni (Xap), which provides rapid, sensitive and specific in planta detection and isolate identification. Primers specific for Xap were identified using random amplified polymorphic DNA (RAPD). Simplex PCR with these primers had a limit of detection per PCR reaction of approximately 10 CFU for isolate cultures and 50 CFU for plant material when used on tenfold dilutions of isolate culture or genomic DNA extracted from spiked samples, respectively. The primers were adapted as a high-throughput single-step screening based on a digoxigenin-labeled DNA probe assay with a detection limit of 4 × 10² CFU from isolate cultures. A duplex-PCR method was designed that includes the pathovar-level with species-level primers based on species-specific regions of the quinate metabolic gene qumA, increasing diagnostic confidence and offering the first molecular test for all X. arboricola pathovars.     

Comparative evaluation of vacuum-based surface sampling methods for collection of Bacillus spores

In this study, four commonly-used sampling devices (vacuum socks, 37 mm 0.8 μm mixed cellulose ester (MCE) filter cassettes, 37 mm 0.3 μm polytetrafluoroethylene (PTFE) filter cassettes, and 3M™ forensic filters) were comparatively evaluated for their ability to recover surface-associated spores. Aerosolized spores (~ 10⁵ CFU cm^− 2) of a Bacillus anthracis surrogate were allowed to settle onto three material types (concrete, carpet, and upholstery). Ten replicate samples were collected using each vacuum method, from each material type. Stainless steel surfaces, inoculated simultaneously with test materials, were sampled with pre-moistened wipes. Wipe recoveries were utilized to normalize vacuum-based recoveries across trials. Recovery (CFU cm^− 2) and relative recovery (vacuum recovery/wipe recovery) were determined for each method and material type. Recoveries and relative recoveries ranged from 3.8 × 10³ to 7.4 × 10⁴ CFU cm^− 2 and 0.035 to 1.242, respectively. ANOVA results indicated that the 37 mm MCE method exhibited higher relative recoveries than the other methods when used for sampling concrete or upholstery. While the vacuum sock resulted in the highest relative recoveries on carpet, no statistically significant difference was detected. The results of this study may be used to guide selection of sampling approaches following biological contamination incidents.     

Peptides panned from a phage-displayed random peptide library are useful for the detection of Bacillus anthracis surrogates B. cereus 4342 and B. anthracis Sterne

Recent use of Bacillus anthracis as a bioweapon has highlighted the need for a sensitive monitoring system. Current bacterial detection tests use antibodies as bio-molecular recognition elements which have limitations with regard to time, specificity and sensitivity, creating the need for new and improved cost-effective high-affinity detection probes. In this study, we screened a commercially available bacteriophage-displayed random peptide library using Bacillus cereus 4342 cells as bait to identify peptides that could be used for detection of Bacillus. The method enabled us to identify two 12-amino acid consensus peptide sequences that specifically bind to B. cereus 4342 and B. anthracis Sterne, the nonpathogenic surrogates of B. anthracis strain. The two Bacillus-binding peptides (named BBP-1 and BBP-2) were synthesized with biotin tag to confirm their binding by four independent detection assays. Dot-blot analysis revealed that the peptides bind specifically to B. cereus 4342 and B. anthracis Sterne. Quantitative analysis of this interaction by ELISA and fluorometry demonstrated a detection sensitivity of 10² colony forming U/ml (CFU/ml) by both assays. When the peptides were used in combination with Qdots, the sensitivity was enhanced further by enabling detection of even a single bacterium by fluorescence microscopy. Immunoblot analysis and protein sequencing showed that BBP-1 and BBP-2 bound to the S-layer protein of B. anthracis Sterne. Overall, our findings validate the usefulness of synthetic versions of phage-derived peptides in combination with Qdot-liquid nanocrystals as high sensitivity bioprobes for various microbial detection platforms.     

Effects of Bacillus thuringiensis toxin Cry1Ac and Beauveria bassiana on Asiatic corn borer (Lepidoptera: Crambidae)

In this study, interactions between Cry1Ac, a toxic crystal protein produced by Bacillus thuringiensis (Berliner), and Beauveria bassiana on the mortality and survival of Ostrinia furnacalis was evaluated in the laboratory. The results showed that Cry1Ac is toxic to O. furnacalis. Not only were larval growth and development delayed, but pupation, pupal weight and adult emergency also decreased when larvae were fed on artificial diet containing purified Cry1Ac toxin. When third instars O. furnacalis were exposed to combination of B. bassiana (1.8 × 10⁵, 1.8 × 10⁶ or 1.8 × 10⁷ conidia ml⁻¹) and Cry1Ac, (0.2 or 0.8 μg g⁻¹), the effect on mortality was additive, however, the combinations of sublethal concentrations showed antagonism between Cry1Ac (3.2 or 13 μg g⁻¹) and B. bassiana (1.8 × 10⁵ or 1.8 × 10⁶ conidia ml⁻¹). When neonates were reared on sublethal concentrations of Cry1AC until the third instar, and survivors exposed B. bassiana conidial suspension, such treatments showed additive effect on mortality of O. furnacalis except for the combination of Cry1Ac (0.2 μg g⁻¹) and B. bassiana (1.8 × 10⁶ conidia ml⁻¹) that showed antagonism.     

EST-SNP genotyping of citrus species using high-resolution melting curve analysis

Citrus taxonomy is very complex mainly due to specific aspects of its reproductive biology. A number of studies have been performed using various molecular markers in order to evaluate the level of genetic variability in Citrus. SNP markers have been used for genetic diversity assessment using a variety of different methods. Recently, the availability of EST database and whole genome sequences has made it possible to develop more markers such as SNPs. In the present study, the high-resolution melting curve analysis (HRM) was used to detect SNPs or INDELs in Citrus genus for the first time. We aimed to develop a panel of SNPs to differentiate Citrus genotypes which can also be applied to Citrus biodiversity studies. The results showed that 21 SNP containing markers produced distinct polymorphic melting curves among the Citrus spp. investigated through HRM analysis. It was proved that HRM is an efficient, cost-effective, and accurate method for discriminating citrus SNPs as well as a method to analyze more polymorphisms in a single PCR amplicon, representing a useful tool for genetic, biodiversity, and breeding studies. SNPs developed based on Citrus sinensis EST database showed a good transferability within the Citrus genus. Moreover, HRM analysis allowed the discrimination of citrus genotypes at specific level and the resulting genetic distance analysis clustered these genotypes into three main branches. The results suggested that the panel of SNP markers could be used in a variety of applications in citrus biodiversity assessment and breeding programs using HRM analysis.     

Detection technologies for Bacillus anthracis: Prospects and challenges

Bacillus anthracis is a Gram-positive, spore-forming bacterium representing the etiological agent of acute infectious disease anthrax, a lethal but rare disease of animals and humans in nature. With recent use of anthrax as a bioweapon, a number of techniques have been recently developed and evaluated to facilitate its rapid detection of B. anthracis in the environment as well as in point-of-care settings for humans suspected of exposure to the pathogen. Complex laboratory methods for B. anthracis identification are required since B. anthracis has similarities with other Bacillus species and its existence in both spore and vegetative forms. This review discusses current challenges and various improvements associated with anthrax agent detection.     

A novel method based on high resolution melting (HRM) analysis for MIRU-VNTR genotyping of Mycobacterium tuberculosis

The mycobacterial interspersed repetitive unit-variable number tandem repeat (MIRU-VNTR) method is one of the most important methods that have been used in recent years for genotyping Mycobacterium tuberculosis. Agarose gel electrophoresis and capillary electrophoresis have been used to determine the size of amplicons, however, both of these methods have shortcomings. Here, we develop and evaluate a novel method for MIRU-VNTR typing based on high resolution melting (HRM) analysis. The MIRU40 locus was selected to evaluate different real-time PCR machines and the accuracy of our method; the Roche LightCycler 480 provided greatest consistency between the T_m value and repeat number and was used in subsequent evaluations. Our method gives greater accuracy in comparison with conventional agarose gel electrophoresis (98.9% vs. 90.9%, p = 0.017), and, with the help of fitting formulae, can be used to obtain the number of MIRU tandem repeats from the T_m value. To validate our method we analyzed 12 classical MIRU loci to genotype 88 clinical isolates. The number of MIRU tandem repeats was determined accurately, quickly and conveniently.     

Genotyping of the protozoan pathogen Toxoplasma gondii using high-resolution melting analysis of the repeated B1 gene

Genetic studies of the protozoan parasite Toxoplasma gondii have identified three main distinct types according to virulence in some hosts. Several methods have been developed to differentiate genotypes currently dominated by microsatellite markers targeting single-copy loci. We analyzed the possibility of using the 35-fold repetitive B1 gene via high-resolution melting (HRM) curve analysis. Sequencing of the B1 gene of 14 reference strains (four Type I, six Type II, and four Type III strains) identified 18 single nucleotide polymorphisms (SNP). Primers were designed to amplify eight of them for HRM analysis and for relative quantification of each nucleotide variation using SNaPshot mini-sequencing. Genotyping with five microsatellite markers was performed for comparison. Two to four HRM profiles were obtained depending on the SNP tested. The differences observed relied on the different ratios of nucleotides at the SNP locus as evidenced via SNaPshot mini-sequencing. The three main lineages could be distinguished by using several HRM profiles. Some HRM profiles proved more informative than the analysis based on five microsatellite markers, showing additional differences in Type I and Type II strains. Using HRM analysis, we obtained at least an equally good discrimination of the main lineages than that based on five microsatellite markers.     

Repellent activity of catmint, Nepeta cataria, and iridoid nepetalactone isomers against Afro-tropical mosquitoes, ixodid ticks and red poultry mites

The repellent activity of the essential oil of the catmint plant, Nepeta cataria (Lamiaceae), and the main iridoid compounds (4aS,7S,7aR) and (4aS,7S,7aS)-nepetalactone, was assessed against (i) major Afro-tropical pathogen vector mosquitoes, i.e. the malaria mosquito, Anopheles gambiae s.s. and the Southern house mosquito, Culex quinquefasciatus, using a World Health Organisation (WHO)-approved topical application bioassay (ii) the brown ear tick, Rhipicephalus appendiculatus, using a climbing repellency assay, and (iii) the red poultry mite, Dermanyssus gallinae, using field trapping experiments. Gas chromatography (GC) and coupled GC-mass spectrometry (GC-MS) analysis of two N. cataria chemotypes (A and B) used in the repellency assays showed that (4aS,7S,7aR) and (4aS,7S,7aS)-nepetalactone were present in different proportions, with one of the oils (from chemotype A) being dominated by the (4aS,7S,7aR) isomer (91.95% by GC), and the other oil (from chemotype B) containing the two (4aS,7S,7aR) and (4aS,7S,7aS) isomers in 16.98% and 69.83% (by GC), respectively. The sesquiterpene hydrocarbon (E)-(1R,9S)-caryophyllene was identified as the only other major component in the oils (8.05% and 13.19% by GC, respectively). Using the topical application bioassay, the oils showed high repellent activity (chemotype A RD₅₀ = 0.081 mg cm⁻² and chemotype B RD₅₀ = 0.091 mg cm⁻²) for An. gambiae comparable with the synthetic repellent DEET (RD₅₀ = 0.12 mg cm⁻²), whilst for Cx. quinquefasciatus, lower repellent activity was recorded (chemotype A RD₅₀ = 0.34 mg cm⁻² and chemotype B RD₅₀ = 0.074 mg cm⁻²). Further repellency testing against An. gambiae using the purified (4aS,7S,7aR) and (4aS,7S,7aS)-nepetalactone isomers revealed overall lower repellent activity, compared to the chemotype A and B oils. Testing of binary mixtures of the (4aS,7S,7aR) and (4aS,7S,7aS) isomers across a range of ratios, but all at the same overall dose (0.1 mg), revealed not only a synergistic effect between the two, but also a surprising ratio-dependent effect, with lower activity for the pure isomers and equivalent or near-equivalent mixtures, but higher activity for non-equivalent ratios. Furthermore, a binary mixture of (4aS,7S,7aR) and (4aS,7S,7aS) isomers, in a ratio equivalent to that found in chemotype B oil, was less repellent than the oil itself, when tested at two doses equivalent to 0.1 and 0.01 mg chemotype B oil. The three-component blend including (E)-(1R,9S)-caryophyllene at the level found in chemotype B oil had the same activity as chemotype B oil. In a tick climbing repellency assay using R. appendiculatus, the oils showed high repellent activity comparable with data for other repellent essential oils (chemotype A RD₅₀ = 0.005 mg and chemotype B RD₅₀ = 0.0012 mg). In field trapping assays with D. gallinae, addition of the chemotype A and B oils, and a combination of the two, to traps pre-conditioned with D. gallinae, all resulted in a significant reduction of D. gallinae trap capture. In summary, these data suggest that although the nepetalactone isomers have the potential to be used in human and livestock protection against major pathogen vectors, intact, i.e. unfractionated, Nepeta spp. oils offer potentially greater protection, due to the presence of both nepetalactone isomers and other components such as (E)-(1R,9S)-caryophyllene.     

Identification of a Bacillus anthracis specific indel in the yeaC gene and development of a rapid pyrosequencing assay for distinguishing B. anthracis from the B. cereus group

Bacillus anthracis, the causative agent of anthrax, is a potential source of bioterrorism. The existing assays for its identification lack specificity due to the close genetic relationship it exhibits to other members of the B. cereus group. Our comparative analyses of protein sequences from Bacillus species have identified a 24 amino acid deletion in a conserved region of the YeaC protein that is uniquely present in B. anthracis. PCR primers based on conserved regions flanking this indel in the Bacillus cereus group of species (viz. Bacillus cereus, B. anthracis, B. thuringiensis, B. mycoides, B. weihenstephnensis and B. pseudomycoides) specifically amplified a 282 bp fragment from all six reference B. anthracis strains, whereas a 354 bp fragment was amplified from 15 other B. cereus group of species/strains. These fragments, due to large size difference, are readily distinguished by means of agarose gel electrophoresis. In contrast to the B. cereus group, no PCR amplification was observed with any of the non-B. cereus group of species/strains. This indel was also used for developing a rapid pyrosequencing assay for the identification of B. anthracis. Its performance was evaluated by examining the presence or absence of this indel in a panel of 81 B. cereus-like isolates from various sources that included 39 B. anthracis strains. Based upon the sequence data from the pyrograms, the yeaC indel was found to be a distinctive characteristic of various B. anthracis strains tested and not found in any other species/strains from these samples. Therefore, this B. anthracis specific indel provides a robust and highly-specific chromosomal marker for the identification of this high-risk pathogen from other members of the B. cereus group independent of a strain's virulence. The pyrosequencing platform also allows for the rapid and simultaneous screening of multiple samples for the presence of this B. anthracis-specific marker.