Recombinant expression and characterization of a l-amino acid oxidase from the fungus Rhizoctonia solani

Applied Microbiology and Biotechnology - l-Amino acid oxidases (L-AAOs) catalyze the oxidative deamination of l-amino acids to the corresponding α-keto acids, ammonia, and hydrogen peroxide....     

Further characterization and mode of action of dactylomelin-P, an antibacterial protein isolated from the ink of the sea hare Aplysia dactylomela (Rang, 1828)

Sea hares are well known, nearly shell-less, marine opisthobranchs that use a complex repertoire of chemicals for defense and communication instead of a conventional gastropod shell. The most conspicuous characteristic of these invertebrates is the secretion of ink, which is rich in bioactive proteins. Many of these proteins belong to a family of L-amino acid oxidases (L-AAOs). In the current study, we aimed to determine whether dactylomelin-P, an antibacterial protein isolated from the ink of Aplysia dactylomela, could act as an L-AAO. We also investigated its biochemical properties and antibacterial mechanism of action. We found that dactylomelin-P is an acidic protein (pI = 5.0), rich in glutamic acid/glutamine, aspartic acid/asparagine, tyrosine, serine, and proline. It was stable under a broad pH range (3.0-12.0), after heating to 55 °C for 30 min, and after treating with protease. Its N-terminal amino acid sequence was DGVCSNRRQCNKEVCGSSYDVAIVGA and showed high similarity to other sea hare proteins previously identified as L-AAOs. The L-AAO activity was confirmed in an enzymatic assay, which showed that dactylomelin-P could oxidize L-lysine and L-arginine. We also demonstrated that the bacteriostatic activity of dactylomelin-P was mediated by hydrogen peroxide generated in the enzymatic reaction, but it acted as a bactericide in the presence of L-lysine and L-arginine. Transmission electron microscopy analyses showed that dactylomelin-P bound to growth-phase bacteria without causing morphological alterations to the cells. The bactericidal effect seems to involve H₂O₂ and other reactive components since it was not counteracted by H₂O₂ scavengers. Our findings showed biochemical, functional, and phylogenetic similarities among L-AAOs isolated from sea hares; this offers new insight into the evolution of these proteins and their roles in chemical defense.     

Preparation of hair for measurement of elements by inductively coupled plasma-mass spectrometry (ICP-MS)

The preparation of hair for the determination of elements is a critical component of the analysis procedure. Open-beaker, closedvessel microwave, and flowthrough microwave digestion are methods that have been used for sample preparation and are discussed. A new digestion method for use with inductively coupled plasma-mass spectrometry (ICP-MS) has been developed. The method uses 0.2 g of hair and 3 mL of concentrated nitric acid in an atmospheric pressurelow-temperature microwave digestion (APLTMD) system. This preparation method is useful in handling a large numbers of samples per day and may be adapted to hair sample weights ranging from 0.08 to 0.3 g. After digestion, samples are analyzed by ICP-MS to determine the concentration of Li, Be, B, Na, Mg, Al, P, S, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ge, As, Se, Rb, Sr, Zr, Mo, Pd, Ag, Cd, Sn, Sb, I, Cs, Ba, Pt, Au, Hg, Tl, Pb, Bi, Th, and U. Benefits of the APLTMD include reduced contamination and sample handling, and increased precision, reliability, and sample throughput.     

The Tomato/GFP-FLP/FRT Method for Live Imaging of Mosaic Adult Drosophila Photoreceptor Cells

The Drosophila eye is widely used as a model for studies of development and neuronal degeneration. With the powerful mitotic recombination technique, elegant genetic screens based on clonal analysis have led to the identification of signaling pathways involved in eye development and photoreceptor (PR) differentiation at larval stages. We describe here the Tomato/GFP-FLP/FRT method, which can be used for rapid clonal analysis in the eye of living adult Drosophila. Fluorescent photoreceptor cells are imaged with the cornea neutralization technique, on retinas with mosaic clones generated by flipase-mediated recombination. This method has several major advantages over classical histological sectioning of the retina: it can be used for high-throughput screening and has proved an effective method for identifying the factors regulating PR survival and function. It can be used for kinetic analyses of PR degeneration in the same living animal over several weeks, to demonstrate the requirement for specific genes for PR survival or function in the adult fly. This method is also useful for addressing cell autonomy issues in developmental mutants, such as those in which the establishment of planar cell polarity is affected.     

Separation of mAbs molecular variants by analytical hydrophobic interaction chromatography HPLC: overview and applications

Hydrophobic interaction chromatography-high performance liquid chromatography (HIC-HPLC) is a powerful analytical method used for the separation of molecular variants of therapeutic proteins. The method has been employed for monitoring various post-translational modifications, including proteolytic fragments and domain misfolding in etanercept (Enbrel®); tryptophan oxidation, aspartic acid isomerization, the formation of cyclic imide, and α amidated carboxy terminus in recombinant therapeutic monoclonal antibodies; and carboxy terminal heterogeneity and serine fucosylation in Fc and Fab fragments. HIC-HPLC is also a powerful analytical technique for the analysis of antibody-drug conjugates. Most current analytical columns, methods, and applications are described, and critical method parameters and suitability for operation in regulated environment are discussed, in this review.     

Surface Spreading and Immunostaining of Yeast Chromosomes

The small size of nuclei of the budding yeast Saccharomyces cerevisiae limits the utility of light microscopy for analysis of the subnuclear distribution of chromatin-bound proteins. Surface spreading of yeast nuclei results in expansion of chromatin without loss of bound proteins. A method for surface spreading balances fixation of DNA bound proteins with detergent treatment. The method demonstrated is slightly modified from that described by Josef Loidl and Franz Klein^1,2. The method has been used to characterize the localization of many chromatin-bound proteins at various stages of the mitotic cell cycle, but is especially useful for the study of meiotic chromosome structures such as meiotic recombinosomes and the synaptonemal complex. We also describe a modification that does not require use of Lipsol, a proprietary detergent, which was called for in the original procedure, but no longer commercially available. An immunostaining protocol that is compatible with the chromosome spreading method is also described.     

A quantitative analysis of wing pattern in the Culicoides pulicaris species group (Diptera: Ceratopogonidae)

Wing pattern is very important in the taxonomy of the genus Culicoides. To date no quantitative method has been described permitting the inclusion of wing pattern characters with traditional morphometric characters in multivariate studies.
Two alternative methods for quantifying wing pattern are developed here. The first superimposes a grid onto a wing and the 420 'characters' generated are scanned for pigmentation. A second method recognizes 13 pattern elements from a sequentially arranged series of wings. The latter method was considered superior for several reasons: it uses logically acceptable characters, reduces character redundancy and allows easier and faster coding.
Empirical multivariate studies show the pattern element method to be of taxonomic value in the difficult C. pulicaris group, and to have considerable potential for use in this and other groups of Diptera with patterned wings.     

A convenient system for highly specific and sensitive detection of miRNA expression

Since the first miRNA was discovered in 1993, miRNAs have become a hotspot for biological research. In order to feed this demand, a robust method is required to detect miRNA gene expression. Development of a detection method is more difficult for miRNAs than for long RNAs, such as mRNA, owing to their small size. Existing methods have limitations; thus, new methods are required. We describe a new system for detecting miRNA expression, which can distinguish miRNA from its precursor and has single-nucleotide resolution. It has single molecule and multiplex detection potential. It may be performed as a polymerase chain reaction (PCR) method, a blotting method, or a macroarray method according to the analyst''s preference. This personalized system provides a convenient tool for the detection of miRNA gene expression.     

云南边境地区果实蝇属种类DNA条形码鉴定

【目的】果实蝇属Bactrocera中有国际上重要的检疫性害虫, 基于形态的物种鉴定有一定的局限性。另一方面, 云南边境地区为东南亚地区实蝇入侵我国的重要通道。因此, 对该地区实蝇分子鉴定方法的研究对于该属物种的快速准确鉴定具有重要意义。本研究旨在探讨DNA条形码技术在果实蝇属物种鉴定中的有效性。【方法】使用线粒体基因COI和COII序列的通用引物对果实蝇属20个物种60份样品进行PCR扩增、测序和序列分析; 采取距离方法和建树方法评价2种序列的鉴别能力。【结果】COI和COII序列平均长度分别为682 bp和339 bp, 种内和种间遗传差异较大, 有较明显的遗传距离间隔（barcoding gap）, 鉴定成功率分别为91.2%和90.7%。另外, 分子系统树表明华实蝇亚属Sinodacus不是单系群。【结论】COI和COII序列均能够将绝大多数果实蝇属物种进行准确鉴别, 应用COI或COII序列进行果实蝇属物种鉴定具有一定的可行性。     

Use of a Robot for High-throughput Crystallization of Membrane Proteins in Lipidic Mesophases

Structure-function studies of membrane proteins greatly benefit from having available high-resolution 3-D structures of the type provided through macromolecular X-ray crystallography (MX). An essential ingredient of MX is a steady supply of ideally diffraction-quality crystals. The in meso or lipidic cubic phase (LCP) method for crystallizing membrane proteins is one of several methods available for crystallizing membrane proteins. It makes use of a bicontinuous mesophase in which to grow crystals. As a method, it has had some spectacular successes of late and has attracted much attention with many research groups now interested in using it. One of the challenges associated with the method is that the hosting mesophase is extremely viscous and sticky, reminiscent of a thick toothpaste. Thus, dispensing it manually in a reproducible manner in small volumes into crystallization wells requires skill, patience and a steady hand. A protocol for doing just that was developed in the Membrane Structural & Functional Biology (MS&FB) Group^1-3. JoVE video articles describing the method are available^1,4. The manual approach for setting up in meso trials has distinct advantages with specialty applications, such as crystal optimization and derivatization. It does however suffer from being a low throughput method. Here, we demonstrate a protocol for performing in meso crystallization trials robotically. A robot offers the advantages of speed, accuracy, precision, miniaturization and being able to work continuously for extended periods under what could be regarded as hostile conditions such as in the dark, in a reducing atmosphere or at low or high temperatures. An in meso robot, when used properly, can greatly improve the productivity of membrane protein structure and function research by facilitating crystallization which is one of the slow steps in the overall structure determination pipeline. In this video article, we demonstrate the use of three commercially available robots that can dispense the viscous and sticky mesophase integral to in meso crystallogenesis. The first robot was developed in the MS&FB Group^5,6. The other two have recently become available and are included here for completeness. An overview of the protocol covered in this article is presented in Figure 1. All manipulations were performed at room temperature (~20 °C) under ambient conditions.     

AFM-based Mapping of the Elastic Properties of Cell Walls: at Tissue,Cellular, and Subcellular Resolutions

We describe a recently developed method to measure mechanical properties of the surfaces of plant tissues using atomic force microscopy (AFM) micro/nano-indentations, for a JPK AFM. Specifically, in this protocol we measure the apparent Young’s modulus of cell walls at subcellular resolutions across regions of up to 100 µm x 100 µm in floral meristems, hypocotyls, and roots. This requires careful preparation of the sample, the correct selection of micro-indenters and indentation depths. To account for cell wall properties only, measurements are performed in highly concentrated solutions of mannitol in order to plasmolyze the cells and thus remove the contribution of cell turgor pressure.In contrast to other extant techniques, by using different indenters and indentation depths, this method allows simultaneous multiscale measurements, i.e. at subcellular resolutions and across hundreds of cells comprising a tissue. This means that it is now possible to spatially-temporally characterize the changes that take place in the mechanical properties of cell walls during development, enabling these changes to be correlated with growth and differentiation. This represents a key step to understand how coordinated microscopic cellular changes bring about macroscopic morphogenetic events.However, several limitations remain: the method can only be used on fairly small samples (around 100 µm in diameter) and only on external tissues; the method is sensitive to tissue topography; it measures only certain aspects of the tissue’s complex mechanical properties. The technique is being developed rapidly and it is likely that most of these limitations will be resolved in the near future.     

Comparison of gas accumulation profiles of several feeds using manual or automated gas production methods

The relationship of metabolizable energy (ME) content of the diet to gas production measured by the Hohenheim gas test (HGT) has been studied intensively. However, the HGT is being replaced by automatic systems like the automated pressure evaluation system (APES) and comparison with the HGT method is required before ME estimation can be automated. This study compared the two different gas production methods (HGT and the APES) with regard to the cumulative gas profile. With the APES method, the release of gas may occur at any time, assuming fixed amounts of gas being released for each venting, after reaching fixed values of pressure. With the HGT method manual readings are performed at defined time points. For comparison purposes, gas production was calculated on the basis of ml/200 mg dry matter (DM), as usual in the HGT method. For 11 feeds analyzed (grass silage, meadow hay, fresh red clover, fresh birdsfoot trefoil, whole-crop oat silage, maize stover and ear maize, dairy compound feed and soybean meal) the APES method produced on average 5.5 ml (range 1.1–8.3 ml/200 mg DM) less gas on average compared to the HGT method (0–120 h incubation time). Reasons for the differences may be related to the measurement conditions of each method itself. The ratio of sample size to rumen fluid (mg/ml) is 20:1 in the HGT method and 100:1 in the APES method, which may have influenced the colonization rate and contributed to a larger lag phase in APES. The estimates are based on two runs, which were performed on different days, with the APES method generating a large run effect. In conclusion, the amount of gas produced using the APES method deviated consistently from the amounts of gas produced by the HGT method in a large range of gas production (30–72 ml/200 mg DM). Using the laboratory protocol as proposed by each method, the suggested mathematical correction of the gas measured through APES appears applicable for gas production after 24 h, needing a larger number of samples to prove its efficacy.     

Detection of True IgE-expressing Mouse B Lineage Cells

B lymphocyte immunoglobulin heavy chain (IgH) class switch recombination (CSR) is a process wherein initially expressed IgM switches to other IgH isotypes, such as IgA, IgE and IgG. Measurement of IgH CSR in vitro is a key method for the study of a number of biologic processes ranging from DNA recombination and repair to aspects of molecular and cellular immunology. In vitro CSR assay involves the flow cytometric measurement surface Ig expression on activated B cells. While measurement of IgA and IgG subclasses is straightforward, measurement of IgE by this method is problematic due to soluble IgE binding to FcεRII/CD23 expressed on the surface of activated B cells. Here we describe a unique procedure for accurate measurement of IgE-producing mouse B cells that have undergone CSR in culture. The method is based on trypsin-mediated cleavage of IgE-CD23 complexes on cell surfaces, allowing for detection of IgE-producing B lineage cells by cytoplasmic staining. This procedure offers a convenient solution for flow cytometric analysis of CSR to IgE.     

High-throughput Analysis of Mammalian Olfactory Receptors: Measurement of Receptor Activation via Luciferase Activity

Odorants create unique and overlapping patterns of olfactory receptor activation, allowing a family of approximately 1,000 murine and 400 human receptors to recognize thousands of odorants. Odorant ligands have been published for fewer than 6% of human receptors^1-11. This lack of data is due in part to difficulties functionally expressing these receptors in heterologous systems. Here, we describe a method for expressing the majority of the olfactory receptor family in Hana3A cells, followed by high-throughput assessment of olfactory receptor activation using a luciferase reporter assay. This assay can be used to (1) screen panels of odorants against panels of olfactory receptors; (2) confirm odorant/receptor interaction via dose response curves; and (3) compare receptor activation levels among receptor variants. In our sample data, 328 olfactory receptors were screened against 26 odorants. Odorant/receptor pairs with varying response scores were selected and tested in dose response. These data indicate that a screen is an effective method to enrich for odorant/receptor pairs that will pass a dose response experiment, i.e. receptors that have a bona fide response to an odorant. Therefore, this high-throughput luciferase assay is an effective method to characterize olfactory receptors—an essential step toward a model of odor coding in the mammalian olfactory system.     

Improvement of Automatic In-Gel Digestion by in Situ Alkylation of Proteins

We have recently improved the automation of an in-gel digestion system, DigestPro 96, using in situ alkylation of proteins with acrylamide, conducted during one-dimensional (1D) SDS-PAGE. The improved method included the processes of destaining, dehydration, trypsin digestion, and extraction but excluded the reduction and alkylation steps following staining of proteins with CBB. The extracted peptide mixtures were directly loaded onto a micro C18 LC column of the mass spectrometer. The resultant spectra were processed with “Mascot” search engine to estimate the sequence coverage of the bovine serum albumin (BSA). The original method, designed for Laemmli 1D SDS gel applications, consisted of reduction and post-alkylation with iodoacetamide, which produced carboxyamidemethyl (CAM; –S–CH₂CONH₂) derivatives. The original method also included a desalting step essential for mass spectrometry, especially matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. We compared the original and improved methods using BSA (3 pmol loaded to the gel, one third of digested peptide mixture injected into LC-MS). The original method yielded both CAM and propionicamide (PAM; –S–CH₂CH₂CONH₂) derivatives. The source of PAM derivatives is the unpolymerized acrylamide formed during electrophoresis. The sequence coverage of CAM derivatives of BSA by the original method was 10% with desalting and 19% without desalting. The sequence coverage of PAM derivative by the improved method was 32%. Our results clearly show the advantage of our improved automated in-gel digestion method for in situ PAM alkylated protein with respect to peptide recovery, compared with the original method with CAM post-alkylation.     

NLF2 gene expression in the endometrium of patients with implantation failure after IVF treatment

We developed and evaluated the specificity and sensitivity of a loop-mediated isothermal amplification (LAMP) method for rapid detection of the multidrug-resistance gene cfr. A pair of outer primers and a pair of inner primers and one loop primer were specially designed for recognizing seven distinct sequences on the target cfr gene. The amplification reaction was performed within only 35 min under isothermal conditions at 63 °C in a regular water bath with visual measurement. The LAMP assay showed higher sensitivity than the conventional PCR, with a detection limit of 1 pg per tube of chicken Staphylococcus sciuri genomic DNA. The detection rate of cfr gene for 50 Staphylococcus clinical strains by LAMP assays was 16% and appeared 100% consistence with the result by PCR method. The LAMP method reported here demonstrated a potential and valuable means for detection of the multidrug-resistance gene cfr: easy, rapid, visual, specific, accurate and sensitive, especially useful for on-the-spot investigation.     

Automatic selection of partitioning schemes for phylogenetic analyses using iterative k-means clustering of site rates

Background

Model selection is a vital part of most phylogenetic analyses, and accounting for the heterogeneity in evolutionary patterns across sites is particularly important. Mixture models and partitioning are commonly used to account for this variation, and partitioning is the most popular approach. Most current partitioning methods require some a priori partitioning scheme to be defined, typically guided by known structural features of the sequences, such as gene boundaries or codon positions. Recent evidence suggests that these a priori boundaries often fail to adequately account for variation in rates and patterns of evolution among sites. Furthermore, new phylogenomic datasets such as those assembled from ultra-conserved elements lack obvious structural features on which to define a priori partitioning schemes. The upshot is that, for many phylogenetic datasets, partitioned models of molecular evolution may be inadequate, thus limiting the accuracy of downstream phylogenetic analyses.

Results

We present a new algorithm that automatically selects a partitioning scheme via the iterative division of the alignment into subsets of similar sites based on their rates of evolution. We compare this method to existing approaches using a wide range of empirical datasets, and show that it consistently leads to large increases in the fit of partitioned models of molecular evolution when measured using AICc and BIC scores. In doing so, we demonstrate that some related approaches to solving this problem may have been associated with a small but important bias.

Conclusions

Our method provides an alternative to traditional approaches to partitioning, such as dividing alignments by gene and codon position. Because our method is data-driven, it can be used to estimate partitioned models for all types of alignments, including those that are not amenable to traditional approaches to partitioning.     

Promise and problems in applying quantitative complementary areas for representing the diversity of some Neotropical plants (families Dichapetalaceae, Lecythidaceae, Garyocaraceae, Ghrysobalanaceae and Proteaceae)

Priority areas for in situ conservation are an unavoidable consequence of competition with other land uses, although they are certainly not to be seen as the only areas of value for conservation. In 1990 an international workshop was convened in Manaus, Brazil, to identify priority areas within Amazonia by committee (Workshop-90). A substantial part of the data for this assessment came from five plant families recorded for the Flora Neotropica. We compare the success of the Workshop-90 method in representing these plant species with the results of using a simple quantitative method for seeking complementary areas. The promises of quantitative methods are twofold. First, they force people to make their values explicit, which is important because priorities are dependent on the values and goals of individuals and are not universal. Second, quantitative methods can achieve representation of more of what is valued. For example, within the 90 top-priority areas (an arbitrary but convenient figure taken from Workshop-90), species representation is shown to be increased when using the complementary areas method by 83%. Simple computer implementations of this method can provide the means for fast inter-active exploration of flexibility in the many alternative area choices. This permits monitoring and review with minimum effort as new data on species and threats are acquired. On the other hand, the problem for all methods is the need for very large numbers of data, whether based on species or on any other surrogates for biodiversity, if well-informed decisions are to be made. This is not a particular problem of quantitative methods, but their explicit nature does highlight the shortcomings of data. For example, patterns in the Flora Neotropica data show effects from small samples even though these data are among the best available for any large tropical wet-forest region. Furthermore, in order to assess the longer-term consequences of area choices, quantitative methods will require many explicit local data on factors affecting viability, threat and cost.     

Gas chromatography profile of estrogens: Application to pregnancy urine

A method for the simultaneous quantitation of 7 estrogens in pregnancy urine is described. It involves enzymatic hydrolysis, extraction of free steroids, ion-exchange column chromatography and quantitation of the trimethylsilyl derivatives by gas chromatography on OV 1. Data obtained from normal and twin pregnancies and from women with anencephalic fetus or intra uterine fetal death are analysed. The sensibility of the method is about 40 μg of each estrogen by liter of urine.