Solubility and phase transitions in the water-protein-salt system

The previously derived formulas for the curves corresponding to sol-gel, liquid-liquid, and liquid-solid phase transitions, which correlate the critical molar composition of the water-protein-salt system with individual characteristic features of its component (protein charge z, the number of ions adsorbed v, the function of electrolyte activity A) are presented as curves in ordinary coordinates of protein solubility logS against salt concentration m3. Tendencies in changes in phase transition lines versus the v, z, and v/z ratio have been determined. Correlations of the salting-out curve and the salting-out coefficient with phase transitions are discussed.     

Novel methods for studying lipids and lipases and their mutual interaction at interfaces. Part II. Surface sensitive synchrotron X-ray scattering

Monolayers of lipids have been studied for more than a century. During the past decade new insight into the field has resulted from the development of surface sensitive X-ray scattering methods utilizing synchrotron radiation: grazing-incidence X-ray diffraction (GIXD) and specular X-ray reflectivity (XR). These novel methods provide direct microscopic information about the systems in question and allow in situ investigations under near physiological conditions. GIXD gives information about the in-plane molecular structure, e.g., lattice symmetry and structural parameters; XR provides the electron density profile across the interface. The present review describes the theory, experimental procedures and sample requirements for surface sensitive X-ray scattering. An overview of recent results is presented as well, with special emphasis on biologically important systems, e.g., investigations by GIXD and/or XR of lipid and protein structures at interfaces and of lipid/protein interactions.     

SARS coronavirus E protein in phospholipid bilayers: an x-ray study

We investigated the structure of the hydrophobic domain of the severe acute respiratory syndrome E protein in model lipid membranes by x-ray reflectivity and x-ray scattering. In particular, we used x-ray reflectivity to study the location of an iodine-labeled residue within the lipid bilayer. The label imposes spatial constraints on the protein topology. Experimental data taken as a function of protein/lipid ratio P/L and different swelling states support the hairpin conformation of severe acute respiratory syndrome E protein reported previously. Changes in the bilayer thickness and acyl-chain ordering are presented as a function of P/L, and discussed in view of different structural models.     

Lipid model membranes for drug interaction study

The present work shows a structural study on the process of incorporation of a hydrophobic drug, Ellipticine (ELPT), into lipid model membranes for drug targeting purpose. The ELPT is an alkaloid that showed an anti-proliferation activity against several types of tumor cells and against the HIV1 virus. We used the zwitterionic lipid dipalmitoyl phosphatidylcholine (DPPC) and four different anionic lipids: cardiolipin (CL), dipalmitoyl phosphatidic acid (DPPA), dipalmitoyl phosphatidylglycerol (DPPG) and dipalmitoyl phosphatidylserine (DPPS), both spread on a Langmuir monolayer and deposited on a solid substrate to mimic a model membrane and study the interaction with the drug ELPT. X-ray reflectivity results pointed toward an increase in drug loading efficiency up to 13.5% mol/mol of ELPT into mixed systems DPPC/CL. This increase in loading efficiency was also accompanied by a slight distortion in the stacking of the bilayers less evidenced after optimization of the molar ratio between the co-lipids. Grazing incidence X-ray diffraction measurements revealed an in-plane lattice distortion due to the presence of hydrocarbon chain backbone ordering in pure systems of DPPC doped with ELPT. The same was not observed in mixed membranes with DPPC/CL and DPPC/DPPA.     

Mass spectrometry advances in lipidomica: collision-induced decomposition of Kdo2-lipid A

Mass spectrometry has made significant advances in the analysis of lipid substances, both simple and complex present in extracts of eukaryotic and prokaryotic cells. The development of the ionization techniques of electrospray ionization and matrix-assisted laser desorption ionization (MALDI) have both been applied to the analysis of lipids. The example of the types of structural information that can be obtained from MALDI-TOF tandem mass spectrometry is exemplified by the analysis of Kdo2-lipid A, a complex lipopolysaccharide known to activate toll-like 4 receptors on mammalian cells. Analysis of Kdo2-lipid A obtained from an Escherichia coli WBB06 was found to generate an abundant [M-H]- ion at m/z 2236.4 and a more abundant carbon-13 isotope at m/z 2237.4. Furthermore, collisional activation of the lipid A portion of the molecule at m/z 1796.3 resulted in a series of ions corresponding to the loss of all four fatty acyl groups as neutral carboxylic acids. An altogether different challenge of mass spectrometry applied to the area of lipid analysis is that of quantitative analysis. Two rather different requirements have emerged. One with high precision and accuracy for the measurement of relatively few lipid species that are produced at very low concentrations and typically interact with specific receptor proteins. A rather different challenge is that for the analysis of abundant lipid classes, which are composed of multiple molecular species that can approach several hundred under certain circumstances.     

Lipid membrane templates the ordering and induces the fibrillogenesis of Alzheimer's disease amyloid-beta peptide

The lipid membrane has been shown to mediate the fibrillogenesis and toxicity of Alzheimer's disease (AD) amyloid-beta (Abeta) peptide. Electrostatic interactions between Abeta40 and the phospholipid headgroup have been found to control the association and insertion of monomeric Abeta into lipid monolayers, where Abeta exhibited enhanced interactions with charged lipids compared with zwitterionic lipids. To elucidate the molecular-scale structural details of Abeta-membrane association, we have used complementary X-ray and neutron scattering techniques (grazing-incidence X-ray diffraction, X-ray reflectivity, and neutron reflectivity) in this study to investigate in situ the association of Abeta with lipid monolayers composed of either the anionic lipid 1,2-dipalmitoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (DPPG), the zwitterionic lipid 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), or the cationic lipid 1,2-dipalmitoyl 3-trimethylammonium propane (DPTAP) at the air-buffer interface. We found that the anionic lipid DPPG uniquely induced crystalline ordering of Abeta at the membrane surface that closely mimicked the beta-sheet structure in fibrils, revealing an intriguing templated ordering effect of DPPG on Abeta. Furthermore, incubating Abeta with lipid vesicles containing the anionic lipid 1-palmitoyl-2-oleoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (POPG) induced the formation of amyloid fibrils, confirming that the templated ordering of Abeta at the membrane surface seeded fibril formation. This study provides a detailed molecular-scale characterization of the early structural fluctuation and assembly events that may trigger the misfolding and aggregation of Abeta in vivo. Our results implicate that the adsorption of Abeta to anionic lipids, which could become exposed to the outer membrane leaflet by cell injury, may serve as an in vivo mechanism of templated-aggregation and drive the pathogenesis of AD.     

Viral ion channel proteins in model membranes: a comparative study by X-ray reflectivity

We have investigated the effect of the transmembrane domain of three viral ion channel proteins on the lipid bilayer structure by X-ray reflectivity and scattering from oriented planar bilayers. The proteins show a similar effect on the lipid bilayer structural parameters: an increase in the lipid bilayer hydrophobic core, a decrease in the amplitude of the vertical density profile and a systematic change in the ordering of the acyl chains as a function of protein-to-lipid ratio. These results are discussed in a comparative view.     

Nanoscale structural and mechanical effects of beta-amyloid (1-42) on polymer cushioned membranes: a combined study by neutron reflectometry and AFM Force Spectroscopy

The interaction of beta-amyloid peptides with lipid membranes is widely studied as trigger agents in Alzheimer's disease. Their mechanism of action at the molecular level is unknown and their interaction with the neural membrane is crucial to elucidate the onset of the disease. In this study we have investigated the interaction of water soluble forms of beta-amyloid Aβ(1-42) with lipid bilayers supported by polymer cushion. A reproducible protocol for the preparation of a supported phospholipid membrane with composition mimicking the neural membrane and in physiological condition (PBS buffer, pH=7.4) was refined by neutron reflectivity. The change in structure and local mechanical properties of the membrane in the presence of Aβ(1-42) was investigated by neutron reflectivity and Atomic Force Microscopy (AFM) Force Spectroscopy. Neutron reflectivity evidenced that Aβ(1-42) interacts strongly with the supported membrane, causing a change in the scattering length density profile of the lipid bilayer, and penetrates into the membrane. Concomitantly, the local mechanical properties of the bilayer are deeply modified by the interaction with the peptide as seen by AFM Force Spectroscopy. These results may be of great importance for the onset of the Alzheimer's disease, since a simultaneous change in the structural and mechanical properties of the lipid matrix could influence all membrane based signal cascades.     

Interaction of tau protein with model lipid membranes induces tau structural compaction and membrane disruption

The misfolding and aggregation of the intrinsically disordered, microtubule-associated tau protein into neurofibrillary tangles is implicated in the pathogenesis of Alzheimer's disease. However, the mechanisms of tau aggregation and toxicity remain unknown. Recent work has shown that anionic lipid membranes can induce tau aggregation and that membrane permeabilization may serve as a pathway by which protein aggregates exert toxicity, suggesting that the plasma membrane may play dual roles in tau pathology. This prompted our investigation to assess tau's propensity to interact with membranes and to elucidate the mutually disruptive structural perturbations the interactions induce in both tau and the membrane. We show that although highly charged and soluble, the full-length tau (hTau40) is also highly surface active, selectively inserts into anionic DMPG lipid monolayers and induces membrane morphological changes. To resolve molecular-scale structural details of hTau40 associated with lipid membranes, X-ray and neutron scattering techniques are utilized. X-ray reflectivity indicates hTau40s presence underneath a DMPG monolayer and penetration into the lipid headgroups and tailgroups, whereas grazing incidence X-ray diffraction shows that hTau40 insertion disrupts lipid packing. Moreover, both air/water and DMPG lipid membrane interfaces induce the disordered hTau40 to partially adopt a more compact conformation with density similar to that of a folded protein. Neutron reflectivity shows that tau completely disrupts supported DMPG bilayers while leaving the neutral DPPC bilayer intact. Our results show that hTau40s strong interaction with anionic lipids induces tau structural compaction and membrane disruption, suggesting possible membrane-based mechanisms of tau aggregation and toxicity in neurodegenerative diseases.     

Novel sulfonolipid in the extremely halophilic bacterium Salinibacter ruber

Salinibacter ruber is an extremely halophilic bacterium, phylogenetically affiliated with the Flavobacterium/Cytophaga branch of the domain Bacteria. Electrospray mass analyses (negative ion) of the total lipid extract of a pure culture of S. ruber shows a characteristic peak at m/z 660 as the most prominent peak in the high-mass range of the spectrum. A novel sulfonolipid, giving rise to the molecular ion [M-H]- of m/z 660, has been identified. The sulfonolipid isolated and purified by thin-layer chromatography was shown by chemical degradation, mass spectrometry, infrared spectroscopy, and nuclear magnetic resonance analysis to have the structure 2-carboxy-2-amino-3-O-(13'-methyltetradecanoyl)-4-hydroxy-18-methylnonadec-5-ene-1-sulfonic acid. This lipid represents about 10% of total cellular lipids, and it appears to be a structural variant of the sulfonolipids found as main components of the cell envelope of gliding bacteria of the genus Cytophaga and closely related genera (W. Godchaux and E. R. Leadbetter, J. Bacteriol. 153:1238-1246, 1983) and of diatoms (R. Anderson, M. Kates, and B. E. Volcani, Biochim. Biophys. Acta 528:89-106, 1978). Since this sulfonolipid has never been observed in any other extreme halophilic microorganism, we consider the peak at m/z 660 the lipid signature of Salinibacter. This study suggests that this novel sulfonolipid may be used as a chemotaxonomic marker for the detection of Salinibacter within the halophilic microbial community in saltern crystallizer ponds and other hypersaline environments.     

Hisactophilin-mediated binding of actin to lipid lamellae: a neutron reflectivity study of protein membrane coupling.

The neutron reflectivity technique is applied to determine the adsorptive interaction of the 13.5-kDa actin-binding protein hisactophilin from Dictyostelium discoideum with lipid monolayers at a lateral pressure of 21 mN/m < or = pi < or = 25 mN/m at the air-water interface. We compare binding of natural hisactophilin exhibiting a myristic acid chain membrane anchor at the N-terminus (DIC-HIS) and a fatty acid-deficient genetic product expressed in Escherichia coli (EC-HIS). It is demonstrated that only the natural hisactophilin DIC-HIS is capable of mediating the strong binding of monomeric actin to the monolayer, where it forms a layer of about 40 A thickness corresponding to the average diameter of actin monomers. Monolayers composed of pure dimyristoyl phosphatidylcholine with fully deuterated hydrocarbon tails and headgroup (DMPC-d67) and 1:1 mixtures of this lipid with chain deuterated dimyristoyl phosphatidylglycerol (DMPG-d54) are studied on subphases consisting either of fully deuterated buffer (D2O) or of a 9:1 H2O/D2O buffer that matches the scattering length density of air (CMA buffer). The reflectivity data are analyzed in terms of layer models, consisting of one to three layers, depending on the contrast of the buffer and the system. We show that both protein species bind tightly to negatively charged 1:1 DMPC-d67/DMPG-d54 monolayers, thereby forming a thin and most probably monomolecular protein layer of 12-15 A thickness. We find that the natural protein (DIC-HIS) partially penetrates into the lipid monolayer, in contrast to chain-deficient species (EC-HIS), which forms only an adsorbed layer. The coverage of the monolayer with DIC-HIS strongly depends on the presence of anionic DMPG in the monolayer. At a bulk protein concentration of 1.5 micrograms/ml, the molar ratio of bound protein to lipid is about 1:45 for the 1:1 lipid mixture but only 1:420 for the pure DMPC.     

Charge-dependent translocation of the Trojan peptide penetratin across lipid membranes

We studied the interaction of the cell-penetrating peptide penetratin with mixed dioleoylphosphatidylcholine/dioleoylphoshatidylglycerol (DOPC/DOPG) unilamellar vesicles as a function of the molar fraction of anionic lipid, X(PG), by means of isothermal titration calorimetry. The work was aimed at getting a better understanding of factors that affect the peptide binding to lipid membranes and its permeation through the bilayer. The binding was well described by a surface partitioning equilibrium using an effective charge of the peptide of z(P) approximately 5.1 +/- 0.5. The peptide first binds to the outer surface of the vesicles, the effective binding capacity of which increases with X(PG). At X(PG) approximately 0.5 and a molar ratio of bound peptide-to-lipid of approximately 1/20 the membranes become permeable and penetratin binds also to the inner monolayer after internalization. The results were rationalized in terms of an "electroporation-like" mechanism, according to which the asymmetrical distribution of the peptide between the outer and inner surfaces of the charged bilayer causes a transmembrane electrical field, which alters the lateral and the curvature stress acting within the membrane. At a threshold value these effects induce internalization of penetratin presumably via inversely curved transient structures.     

Recognition processes at a functionalized lipid surface observed with molecular resolution.

The specific binding of proteins to functionalized lipid monolayers on aqueous subphases was characterized by neutron reflectivity and fluorescence microscopy measurements. Due to the high affinity and high specificity of their noncovalent interaction, streptavidin (SA) and biotin (vitamin H) were chosen as a model system to investigate the structural characteristics of a recognition process on a molecular length scale. Changes in the neutron reflection from the surfaces of NaCl aqueous (H2O or D2O) protein solutions (10(-8) M SA) were used to monitor the interaction of the protein with a monolayer of a biotinylated lipid in situ. Refinement of the reflectivity data and independent fluorescence microscopic observation of the interface using FITC-labeled SA showed that the protein forms macroscopically homogeneous (and presumably crystalline) domains covering a large portion of the surface. Moreover, the neutron reflection experiments clearly showed the formation of a monomolecular protein layer with an effective thickness, dp = 43.7 +/- 2 A. The area per protein molecule occupied in the film was A0 = 2860 +/- 200 A2 and nw = 260 +/- 100 water molecules were associated with each protein molecule. Quantitative binding was found to occur at biotin surface concentrations as low as 1 molecule/1,250 A2 (compared with approximately 1 molecule/40 A2 for dense packing). This study demonstrates the application of a promising new tool for the systematic investigation of molecular recognition processes in protein/lipid model systems.     

Reconstitution of SNARE proteins into solid-supported lipid bilayer stacks and X-ray structure analysis

SNAREs are known as an important family of proteins mediating vesicle fusion. For various biophysical studies, they have been reconstituted into supported single bilayers via proteoliposome adsorption and rupture. In this study we extended this method to the reconstitution of SNAREs into supported multilamellar lipid membranes, i.e. oriented multibilayer stacks, as an ideal model system for X-ray structure analysis (X-ray reflectivity and diffraction). The reconstitution was implemented through a pathway of proteomicelle, proteoliposome and multibilayer. To monitor the structural evolution in each step, we used small-angle X-ray scattering for the proteomicelles and proteoliposomes, followed by X-ray reflectivity and grazing-incidence small-angle scattering for the multibilayers. Results show that SNAREs can be successfully reconstituted into supported multibilayers, with high enough orientational alignment for the application of surface sensitive X-ray characterizations. Based on this protocol, we then investigated the effect of SNAREs on the structure and phase diagram of the lipid membranes. Beyond this application, this reconstitution protocol could also be useful for X-ray analysis of many further membrane proteins.     

SEC-MALS-QELS study on the molecular conformation of cellulose in LiCl/amide solutions

The SEC-MALS-QELS (size-exclusion chromatography equipped with multiangle light scattering and quasi-elastic light scattering detectors) method using lithium chloride/N,N-dimethylacetamide (LiCl/DMAc) and LiCl/1,3-dimethyl-2-imidazolidinone (LiCl/DMI) as mobile phases was applied to cellulose and cellulose tricarbanilate (CTC) samples with various average degree of polymerization (DP) values. Molecular conformations of cellulose and CTC in the solvents were then discussed and compared on the basis of the relationships between the radii of gyration (R(g,z) or S(2)(z)(1/2)), the hydrodynamic radii (R(h,z)), and weight-average DP (DP(w)) or the contour lengths (L(w)). The Benoit-Doty theory for wormlike polymer chains was applied to the R(g) vs L(w) data obtained, and the theoretical curves with Kuhn segment lengths l(K) of around 18 nm were found to fit the data of both cellulose and CTC molecules in the solvents. It was concluded from the obtained results that both cellulose and CTC molecules have conformations essentially identical to each other in the solvents; they behave as typical semiflexible chains in good solvents.     

Selective Interaction of Colistin with Lipid Model Membranes

Although colistin’s clinical use is limited due to its nephrotoxicity, colistin is considered to be an antibiotic of last resort because it is used to treat patients infected with multidrug-resistant bacteria. In an effort to provide molecular details about colistin’s ability to kill Gram-negative (G(?)) but not Gram-positive (G(+)) bacteria, we investigated the biophysics of the interaction between colistin and lipid mixtures mimicking the cytoplasmic membrane of G(+), G(?) bacteria as well as eukaryotic cells. Two different models of the G(?) outer membrane (OM) were assayed: lipid A with two deoxy-manno-octulosonyl sugar residues, and Escherichia coli lipopolysaccharide mixed with dilaurylphosphatidylglycerol. We used circular dichroism and x-ray diffuse scattering at low and wide angle in stacked multilayered samples, and neutron reflectivity of single, tethered bilayers mixed with colistin. We found no differences in secondary structure when colistin was bound to G(?) versus G(+) membrane mimics, ruling out a protein conformational change as the cause of this difference. However, bending modulus K_C perturbation was quite irregular for the G(?) inner membrane, where colistin produced a softening of the membranes at an intermediate lipid/peptide molar ratio but stiffening at lower and higher peptide concentrations, whereas in G(+) and eukaryotic mimics there was only a slight softening. Acyl chain order in G(?) was perturbed similarly to K_C. In G(+), there was only a slight softening and disordering effect, whereas in OM mimics, there was a slight stiffening and ordering of both membranes with increasing colistin. X-ray and neutron reflectivity structural results reveal colistin partitions deepest to reach the hydrocarbon interior in G(?) membranes, but remains in the headgroup region in G(+), OM, and eukaryotic mimics. It is possible that domain formation is responsible for the erratic response of G(?) inner membranes to colistin and for its deeper penetration, which could increase membrane permeability.     

Phase diagram of lipid A from Salmonella minnesota and Escherichia coli rough mutant lipopolysaccharide

We have reported here on the structural polymorphism of lipid A, the "endotoxic principle" of bacterial lipopolysaccharide. For lipid A of rough mutant lipopolysaccharide from Salmonella minnesota and Escherichia coli, the three-dimensional supramolecular structures were determined with x-ray diffraction utilizing synchrotron radiation. The investigations were performed in the water concentration range 10 to 95% by weight, at [lipid A]:[Mg2+] molar ratios from 1:0 to 0.1:1, and in the temperature range from 20 to 70 degrees C. These data were correlated with measurements of the beta----alpha phase behaviour which was monitored with differential scanning calorimetry and Fourier-transform infrared spectroscopy. We found that the transition temperature of the acyl chains ranges--in the absence of Mg2(+)-from 45 degrees C at high to 56 degrees C at low water content, and-at an equimolar content of Mg2(+)-from 52 degrees C at high to 59 degrees C at low water concentrations. In the gel phase-in which the lipid A acyl chains are more disordered than those from saturated phospholipids-cubic phases are adopted at high water content (greater than 60%) and at high [lipid A]:[Mg2+] molar ratios. At low water contents, lamellar states are assumed exclusively. In the liquid crystalline state of lipid A, the hexagonal HII state is adopted under all conditions. The structural variability of lipid A is highest at high water concentrations, and structural changes may be induced by only slight changes in temperature, water content, and Mg2+ concentration. Under physiological conditions, however, the lipid A assemblies exhibit a strong preference to cubic structures.     

Incorporation of beta-lactoglobulin in a lipid/porphyrin monolayer at the air--water interface

A catanionic lipid/porphyrin monolayer was formed at the air-water interface by the tetra-anionic porphyrin, tetra-sodium-meso-tetra(4-sulfonatophenyl)porphine (TSPP), mixed with the cationic lipid dioctadecyldimethylammonium bromide (DODAB) in a 1:4 molar ratio. This binary mixture (TSPP/4DODAB) was used as the incorporation matrix of beta-lactoglobulin (betaLG). Binary and ternary systems (TSPP/4DODAB/zbetaLG, where z stands for the number of protein residues per TSPP) were characterized by surface pressure versus area (pi-A) measurements and by Brewster angle microscopy (BAM) observation at the air-water interface. Pi-A measurements and BAM images show that protein is incorporated in the expanded regime of the monolayer and is gradually expelled upon compression at high surface pressures. The successive compression-expansion cycles indicate that the protein under adsorbed to the floating film is reincorporated after the expansion of the monolayer. At low subphase pH, TSPP tends to aggregate decreasing the interaction with DODAB molecules. Electrostatic and hydrophobic interactions are responsible for the presence of betaLG at the interfacial film.     

Identification of ester-linked fatty acids of bacterial endotoxins by negative ion fast atom bombardment mass spectrometry

Negative ion fast atom bombardment mass spectrometry (NI-FAB/MS) was employed to characterize the fatty acids esterified to the lipid A backbone of lipopolysaccharides (LPS) of gram-negative bacteria. LPS and their chemically derived lipid A produced readily detectable fragment ions characteristic of fatty acids. The NI-FAB/MS method is specific, yielding ions indicative of ester- but not of amide-bound fatty acids. The mass spectra of Enterobacteriaceae LPS revealed the presence of lauric (m/z 199), myristic (m/z 227), palmitic (m/z 255), and 3-hydroxymyristic (m/z 243) acids. Pseudomonas aeruginosa LPS gave distinctive fragment ions indicative of 3-hydroxydecanoic (m/z 187), lauric, and 2-hydroxylauric (m/z 215) acids. The Neisseria gonorrhoeae LPS could be distinguished from the others due to the presence of ester-linked 3-hydroxylauric acid. All of the LPS gave abundant ions of m/z 177 and 159, which were derived from diphosphoryl substituents. The use of NI-FAB/MS thus allowed rapid identification of lipid A esterified fatty acids without chemical derivatization or gas chromatographic analysis.     

Differential effects induced by α- and β-endosulfan in lipid bilayer organization are reflected in proton permeability

The effects of two insecticides isomers, α- and β-endosulfan, on the passive proton permeability of large unilamellar vesicles (LUV) reconstituted with dipalmitoylphosphatidylcholine (DPPC) or mitochondrial lipids were reported. In DPPC (LUV) gel phase, at 30 °C, the global kinetic constant (K) of proton permeability (proportional to the proton permeability) initially increased slightly with the increase of α-endosulfan/lipid molar ratio up to 0.143. In the range from 0.143 to 0.286, a discontinuity in the increment occurred and, above this range, the proton permeability increased substantially. In DPPC fluid phase, at 48 °C, the proton permeability showed a behavior identical to that observed in gel DPPC, with a sharp increase for α-endosulfan/lipid molar ratios ranging from 0.143 to 0.286. At these and higher concentrations, α-endosulfan induced phase separation in the plane of DPPC membranes, as revealed by differential scanning calorimetry (DSC). Conversely to α-endosulfan, β-endosulfan induced only a slight increase in the proton permeability, either in the fluid or the gel phase of DPPC, for all β-endosulfan/lipid molar ratios tested. Additionally, the effects of the endosulfan isomers on the proton permeability of mitochondrial fluid lipid dispersions, at 37 °C, are similar to those described for DPPC. The β-isomer induced a very small effect, and α-endosulfan, at low concentrations, increased slightly the proton permeability, but for insecticide/lipid molar ratios above 0.143 the permeability increased substantially. Consequently, the membrane physical state of synthetic and native lipid dispersions, as affected by the structural features of α- and β-endosulfan, influenced the proton permeability. The effects here observed in vitro suggest that the formation of lateral membrane domains may underlay the biological activity of α-endosulfan in vivo, contributing to its higher degree of toxicity as compared with β-endosulfan.