Role of phaD in accumulation of medium-chain-length Poly(3-hydroxyalkanoates) in Pseudomonas oleovorans

Pseudomonas oleovorans is capable of producing poly(3-hydroxyalkanoates) (PHAs) as intracellular storage material. To analyze the possible involvement of phaD in medium-chain-length (MCL) PHA biosynthesis, we generated a phaD knockout mutant by homologous recombination. Upon disruption of the phaD gene, MCL PHA polymer accumulation was decreased. The PHA granule size was reduced, and the number of granules inside the cell was increased. Furthermore, mutant cells appeared to be smaller than wild-type cells. Investigation of MCL PHA granules revealed that the pattern of granule-associated proteins was changed and that the predominant protein PhaI was missing in the mutant. Complementation of the mutant with a phaD-harboring plasmid partially restored the wild-type characteristics of MCL PHA production and fully restored the granule and cell sizes. Furthermore, PhaI was attached to the granules of the complemented mutant. These results indicate that the phaD gene encodes a protein which plays an important role in MCL PHA biosynthesis. However, although its main effect seems to be the stabilization of MCL PHA granules, we found that the PhaD protein is not a major granule-associated protein and therefore might act by an unknown mechanism involving the PhaI protein.     

Inactivation of Isocitrate Lyase Leads to Increased Production of Medium-Chain-Length Poly(3-Hydroxyalkanoates) in Pseudomonas putida

Medium-chain-length (mcl) poly(3-hydroxyalkanoates) (PHAs) are storage polymers that are produced from various substrates and accumulate in Pseudomonas strains belonging to rRNA homology group I. In experiments aimed at increasing PHA production in Pseudomonas strains, we generated an mcl PHA-overproducing mutant of Pseudomonas putida KT2442 by transposon mutagenesis, in which the aceA gene was knocked out. This mutation inactivated the glyoxylate shunt and reduced the in vitro activity of isocitrate dehydrogenase, a rate-limiting enzyme of the citric acid cycle. The genotype of the mutant was confirmed by DNA sequencing, and the phenotype was confirmed by biochemical experiments. The aceA mutant was not able to grow on acetate as a sole carbon source due to disruption of the glyoxylate bypass and exhibited two- to fivefold lower isocitrate dehydrogenase activity than the wild type. During growth on gluconate, the difference between the mean PHA accumulation in the mutant and the mean PHA accumulation in the wild-type strain was 52%, which resulted in a significant increase in the amount of mcl PHA at the end of the exponential phase in the mutant P. putida KT217. On the basis of a stoichiometric flux analysis we predicted that knockout of the glyoxylate pathway in addition to reduced flux through isocitrate dehydrogenase should lead to increased flux into the fatty acid synthesis pathway. Therefore, enhanced carbon flow towards the fatty acid synthesis pathway increased the amount of mcl PHA that could be accumulated by the mutant.     

Production of Medium-Chain-Length Poly(3-Hydroxyalkanoates) from Gluconate by Recombinant Escherichia coli

It was shown recently that recombinant Escherichia coli, defective in the β-oxidation cycle and harboring a medium-chain-length (MCL) poly(3-hydroxyalkanoate) (PHA) polymerase-encoding gene of Pseudomonas, is able to produce MCL PHA from fatty acids but not from sugars or gluconate (S. Langenbach, B. H. A. Rehm, and A. Steinbüchel, FEMS Microbiol. Lett. 150:303–309, 1997; Q. Ren, Ph.D. thesis, ETH Zürich, Zürich, Switzerland, 1997). In this study, we report the formation of MCL PHA from gluconate by recombinant E. coli. By introduction of genes coding for an MCL PHA polymerase and the cytosolic thioesterase I (′thioesterase I) into E. coli JMU193, we were able to engineer a pathway for the synthesis of MCL PHA from gluconate. We used two expression systems, i.e., the bad promoter and alk promoter, for the ′thioesterase I- and PHA polymerase-encoding genes, respectively, which enabled us to modulate their expression independently over a range of inducer concentrations, which resulted in a maximum MCL PHA accumulation of 2.3% of cell dry weight from gluconate. We found that the amount of PHA and the ′thioesterase I activity are directly correlated. Moreover, the polymer accumulated in the recombinant E. coli consisted mainly of 3-hydroxyoctanoate monomers. On the basis of our data, we propose an MCL PHA biosynthesis pathway scheme for recombinant E. coli JMU193, harboring PHA polymerase and ′thioesterase I, when grown on gluconate, which involves both de novo fatty acid synthesis and β-oxidation.     

PhaG-Mediated Synthesis of Poly(3-Hydroxyalkanoates) Consisting of Medium-Chain-Length Constituents from Nonrelated Carbon Sources in Recombinant Pseudomonas fragi

Recently, a new metabolic link between fatty acid de novo biosynthesis and biosynthesis of poly(3-hydroxy-alkanoate) consisting of medium-chain-length constituents (C₆ to C₁₄) (PHA_MCL), catalyzed by the 3-hydroxydecanoyl-[acyl-carrier-protein]:CoA transacylase (PhaG), has been identified in Pseudomonas putida (B. H. A. Rehm, N. Krüger, and A. Steinbüchel, J. Biol. Chem. 273:24044–24051, 1998). To establish this PHA-biosynthetic pathway in a non-PHA-accumulating bacterium, we functionally coexpressed phaC1 (encoding PHA synthase 1) from Pseudomonas aeruginosa and phaG (encoding the transacylase) from P. putida in Pseudomonas fragi. The recombinant strains of P. fragi were cultivated on gluconate as the sole carbon source, and PHA accumulation to about 14% of the total cellular dry weight was achieved. The respective polyester was isolated, and GPC analysis revealed a weight average molar mass of about 130,000 g mol⁻¹ and a polydispersity of 2.2. The PHA was composed mainly (60 mol%) of 3-hydroxydecanoate. These data strongly suggested that functional expression of phaC1 and phaG established a new pathway for PHA_MCL biosynthesis from nonrelated carbon sources in P. fragi. When fatty acids were used as the carbon source, no PHA accumulation was observed in PHA synthase-expressing P. fragi, whereas application of the β-oxidation inhibitor acrylic acid mediated PHA_MCL accumulation. The substrate for the PHA synthase PhaC1 is therefore presumably directly provided through the enzymatic activity of the transacylase PhaG by the conversion of (R)-3-hydroxydecanoyl-ACP to (R)-3-hydroxydecanoyl-CoA when the organism is cultivated on gluconate. Here we demonstrate for the first time the establishment of PHA_MCL synthesis from nonrelated carbon sources in a non-PHA-accumulating bacterium, employing fatty acid de novo biosynthesis and the enzymes PhaG (a transacylase) and PhaC1 (a PHA synthase).     

Methanogenic Degradation of Poly(3-Hydroxyalkanoates)

Poly(3-hydroxybutyrate) and the copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) were fermented to methane and carbon dioxide within 16 days by an anaerobic sewage sludge consortium. The cultures adapted quickly to metabolize these polymeric compounds, and between 83 and 96% of the substrate carbon was transformed to methane and carbon dioxide.     

Continuous Production of Long-Side-Chain Poly-β-Hydroxyalkanoates by Pseudomonas oleovorans

Shake flask experiments showed that Pseudomonas oleovorans began to be growth inhibited at 4.65 g of sodium octanoate liter^-1, with total inhibition at 6 g liter^-1. In chemostat studies with 2 g of ammonium sulfate and 8 g of octanoate liter^-1 in the feed, the maximum specific growth rate was 0.51 h^-1, and the maximum specific rate of poly-β-hydroxyalkanoate (PHA) production was 0.074 g of PHA g of cellular protein^-1 h^-1 at a dilution rate (D) of 0.25 h^-1. When the specific growth rate (μ) was <0.3 h^-1, the PHA composition was relatively constant with a C₄/C₆/C₈/C₁₀ ratio of 0.1:1.7:20.7:1.0. At μ > 0.3 h^-1, a decrease in the percentage of C₈ with a concomitant increase in C₁₀ monomers as μ increased was probably due to the effects of higher concentrations of unmetabolized octanoate in the fermentor. At D = 0.24 h^-1 and an increasing carbon/nitrogen ratio, the percentage of PHA in the biomass was constant at 13% (wt/wt), indicating that nitrogen limitation did not affect PHA accumulation. Under carbon-limited conditions, the yield of biomass from substrate was 0.76 g of biomass g of octanoate^-1 consumed, the yield of PHA was 0.085 g of PHA g of octanoate^-1 used, and 7.9 g of octanoate was consumed for each gram of NH₄⁺ supplied. The maintenance coefficient was 0.046 g of octanoate g of biomass^-1 h^-1. Replacement of sodium octanoate with octanoic acid appeared to result in transport-limited growth due to the water insolubility of the acid.     

Genetic Characterization of the Poly(hydroxyalkanoate) Synthases of Various Pseudomonas oleovorans Strains

We identified the poly(hydroxyalkanoate) synthase (PHAS) genes of three strains of Pseudomonas oleovorans by using polymerase chain reaction (PCR)-based detection methods. P. oleovorans NRRL B-14682 contains Class I PHA synthase gene (phaC), NRRL B-14683 harbors Class II phaC1 and phaC2 genes, and NRRL B-778 contain both the Class I and II PHA synthase genes. Inverse-PCR and chromosomal walking techniques were employed to obtain the complete sequences of the Class I phaCs of NRRL B-778 (phbC₇₇₈; 1698 bps) and B-14682 (phbC₁₄₆₈₂; 1899 bps). BLAST search indicated that these genes are new and had not been previously cloned. The gene product of phbC₇₇₈ (i.e., PhbC₇₇₈; 566 amino acid residues) is homologous to the Class I PHA synthases of Pseudomonas sp. HJ-2 and Pseudomonas sp. strain 61-3, and that of phbC₁₄₆₈₂ (PhbC₁₄₆₈₂; 632 amino acids) is homologous to PHAS of Delftia acidovorans. The PhbC₁₄₆₈₂ contains an extra sequence of 33 amino acids in its conserved α/β-hydrolase domain, making it only the second Class I PHA synthase found to contain this cellular proteolytic sequence. Consistent with their Pseudomonas origin, the codon-usage profiles of PhbC₇₇₈ and PhbC₁₄₆₈₂ are similar to those of Pseudomonas Class II PHASs. These new Pseudomonas Class I phbC genes provide valuable addition to the gene pool for the construction of novel PHASs through gene shuffling.     

Formation of Polyesters by Pseudomonas oleovorans: Effect of Substrates on Formation and Composition of Poly-(R)-3-Hydroxyalkanoates and Poly-(R)-3-Hydroxyalkenoates

Pseudomonas oleovorans grows on C₆ to C₁₂n-alkanes and 1-alkenes. These substrates are oxidized to the corresponding fatty acids, which are oxidized further via the β-oxidation pathway, yielding shorter fatty acids which have lost one or more C₂ units. P. oleovorans normally utilizes β-oxidation pathway intermediates for growth, but in this paper we show that the intermediate 3-hydroxy fatty acids can also be polymerized to intracellular poly-(R)-3-hydroxyalkanoates (PHAs) when the medium contains limiting amounts of essential elements, such as nitrogen. The monomer composition of these polyesters is a reflection of the substrates used for growth of P. oleovorans. The largest monomer found in PHAs always contained as many C atoms as did the n-alkane used as a substrate. Monomers which were shorter by one or more C₂ units were also observed. Thus, for C-even substrates, only C-even monomers were found, the smallest being (R)-3-hydroxyhexanoate. For C-odd substrates, only C-odd monomers were found, with (R)-3-hydroxyheptanoate as the smallest monomer. 1-Alkenes were also incorporated into PHAs, albeit less efficiently and with lower yields than n-alkanes. These PHAs contained both saturated and unsaturated monomers, apparently because the 1-alkene substrates could be oxidized to carboxylic acids at either the saturated or the unsaturated ends. Up to 55% of the PHA monomers contained terminal double bonds when P. oleovorans was grown on 1-alkenes. The degree of unsaturation of PHAs could be modulated by varying the ratio of alkenes to alkanes in the growth medium. Since 1-alkenes were also shortened before being polymerized, as was the case for n-alkanes, copolymers which varied with respect to both monomer chain length and the percentage of terminal double bonds were formed during nitrogen-limited growth of P. oleovorans on 1-alkenes. Such polymers are expected to be useful for future chemical modifications.     

Engineering of Stable Recombinant Bacteria for Production of Chiral Medium-Chain-Length Poly-3-Hydroxyalkanoates

In order to scale up medium-chain-length polyhydroxyalkanoate (mcl-PHA) production in recombinant microorganisms, we generated and investigated different recombinant bacteria containing a stable regulated expression system for phaC1, which encodes one of the mcl-PHA polymerases of Pseudomonas oleovorans. We used the mini-Tn5 system as a tool to construct Escherichia coli 193MC1 and P. oleovorans POMC1, which had stable antibiotic resistance and PHA production phenotypes when they were cultured in a bioreactor in the absence of antibiotic selection. The molecular weight and the polydispersity index of the polymer varied, depending on the inducer level. E. coli 193MC1 produced considerably shorter polyesters than P. oleovorans produced; the weight average molecular weight ranged from 67,000 to 70,000, and the polydispersity index was 2.7. Lower amounts of inducer added to the media shifted the molecular weight to a higher value and resulted in a broader molecular mass distribution. In addition, we found that E. coli 193MC1 incorporated exclusively the R configuration of the 3-hydroxyoctanoate monomer into the polymer, which corroborated the enantioselectivity of the PhaC1 polymerase enzyme.     

Accumulation of Poly[(R)-3-hydroxyalkanoates] in Pseudomonas oleovorans during growth with octanoate in continuous culture at different dilution rates

Pseudomonas oleovorans ATCC 29347 was grown in chemostat culture at different dilution rates with mineral media varying in their ratios of octanoate to ammonia (C(0)/N(0) ratio). At all dilution rates tested, three distinct growth regimes were observed: (i) carbon limitation with NH(4)(+) in excess at low C(0)/N(0) ratios, (ii) purely nitrogen-limited growth conditions at high C(0)/N(0) ratios with residual octanoate in the culture supernatant, and (iii) an intermediate zone of dual-nutrient-limited growth conditions where both the concentration of octanoate and that of ammonia were very low. The dual-nutrient-limited growth zone shifted to higher C(0)/N(0) ratios with decreasing dilution rates, and the extension of the dual-nutrient-limited growth zone was inversely proportional to the growth rate. The cells accumulated the storage compound medium-chain-length poly[(R)-3-hydroxyalkanoate] (mcl-PHA) during dual (C and N)-nutrient-limited and N-limited growth conditions. Within the dual-nutrient-limited growth zone, the cellular mcl-PHA contents increased when the C(0)/N(0) ratio in the feed was increased, whereas the cellular mcl-PHA level was independent from the feed C(0)/N(0) ratio during N-limited growth. The monomeric composition of the accumulated mcl-PHA was independent of both the dilution rate and the feed C(0)/N(0) ratio and consisted of 12 mol% 3-hydroxyhexanoic acid and 88 mol% 3-hydroxyoctanoic acid. Accumulation of mcl-PHA led to an increase in the cellular C/N ratio and to changes in elemental growth yields for nitrogen and carbon.     

Pseudomonas oleovorans as a Source of Poly(beta-Hydroxyalkanoates) for Potential Applications as Biodegradable Polyesters

Pseudomonas oleovorans was grown in homogeneous media containing n-alkanoic acids, from formate to decanoate, as the sole carbon sources. Formation of intracellular poly(beta-hydroxyalkanoates) was observed only for hexanoate and the higher n-alkanoic acids. The maximum isolated polymer yields were approximately 30% of the cellular dry weight with growth on either octanoate or nonanoate. In most cases, the major repeating unit in the polymer had the same chain length as the n-alkanoic acid used for growth, but units with two carbon atoms less or more than the acid used as a carbon source were also generally present in the polyesters formed. Indeed, copolymers containing as many as six different types of beta-hydroxyalkanoate units were formed. The weight average molecular weights of the poly(beta-hydroxyalkanoate) copolymers produced by P. oleovorans ranged from 90,000 to 370,000. In spite of the higher cell yields obtained with octanoate and nonanoate, the use of hexanoate and heptanoate yielded higher-molecular-weight polymers. These copolyesters represent an entirely new class of biodegradable thermoplastics.     

Poly(ethylene glycol)-mediated molar mass control of short-chain- and medium-chain-length poly(hydroxyalkanoates) from Pseudomonas oleovorans

Three strains of Pseudomonas oleovorans, a well known poly(hydroxyalkanoate) (PHA) producer, were tested for the ability to control PHA molar mass and end group structure by addition of poly(ethylene glycol) (PEG) to the fermentation medium. Each strain of P. oleovorans - NRRL B-14682 (B-14682), NRRL B-14683 (B-14683), and NRRL B-778 (B-778) - synthesized a different type of PHA from oleic acid when cultured under identical growth conditions. Strain B-14682 produced poly(3-hydroxybutyrate) (PHB), while B-14683 synthesized a medium-chain-length PHA ( mcl-PHA) with a repeat unit composition ranging from C4 to C14 and some mono-unsaturation in the C14 alkyl side chains. Strain B-778 synthesized a mixture of PHB (95 mol%) and mcl-PHA (5 mol%). The addition of 0.5% (v/v) PEG (M(n) =200 g/mol, PEG-200) to the fermentation broth of strains B-14682 and B-778 resulted in chain termination through esterification at the carboxyl terminus of the PHB with PEG chain segments, thus reducing the molar mass by 54% and 23%, respectively. The molar mass of the mcl-PHA produced by strains B-14683 and B-778 also showed a 34% and 47% reduction in the presence of PEG-200, respectively, but no evidence of esterification was present. PEG-400 (M(n) =400 g/mol) had a reduced effect on PHA molar mass. In fact, the molar masses of the mcl-PHA derived from strain B-14683 and both the PHB and mcl-PHA from B-778 were unchanged by PEG-400. In contrast, the PHB produced by B-14682 showed a 35% reduction in molar mass in the presence of PEG-400.     

Reduction of Cell Lysate Viscosity during Processing of Poly(3-Hydroxyalkanoates) by Chromosomal Integration of the Staphylococcal Nuclease Gene in Pseudomonas putida

Poly(3-hydroxyalkanoates) (PHAs) are biodegradable thermoplastics which are accumulated by many bacterial species in the form of intracellular granules and which are thought to serve as reserves of carbon and energy. Pseudomonas putida accumulates a polyester, composed of medium-side-chain 3-hydroxyalkanoic acids, which has excellent film-forming properties. Industrial processing of PHA involves purification of the PHA granules from high-cell-density cultures. After the fermentation process, cells are lysed by homogenization and PHA granules are purified by chemical treatment and repeated washings to yield a PHA latex. Unfortunately, the liberation of chromosomal DNA during lysis causes a dramatic increase in viscosity, which is problematic in the subsequent purification steps. Reduction of the viscosity is generally achieved by the supplementation of commercially available nuclease preparations or by heat treatment; however, both procedures add substantial costs to the process. As a solution to this problem, a nuclease-encoding gene from Staphylococcus aureus was integrated into the genomes of several PHA producers. Staphylococcal nuclease is readily expressed in PHA-producing Pseudomonas strains and is directed to the periplasm, and occasionally to the culture medium, without affecting PHA production or strain stability. During downstream processing, the viscosity of the lysate from a nuclease-integrated Pseudomonas strain was reduced to a level similar to that observed for the wild-type strain after treatment with commercial nuclease. The nuclease gene was also functionally integrated into the chromosomes of other PHA producers, including Ralstonia eutropha.     

Polyphosphate Accumulation by Pseudomonas putida CA-3 and Other Medium-Chain-Length Polyhydroxyalkanoate-Accumulating Bacteria under Aerobic Growth Conditions

Pseudomonas putida CA-3 accumulates polyphosphate (polyP) and medium-chain-length polyhydroxyalkanoate (mclPHA) concurrently under nitrogen limitation. Five other mclPHA-accumulating Pseudomonas strains are capable of simultaneous polyP and mclPHA biosynthesis. It appears that polyP is not the rate-limiting step for mclPHA accumulation in these Pseudomonas strains.     

Poly(3-hydroxyvalerate) depolymerase of Pseudomonas lemoignei

Pseudomonas lemoignei is equipped with at least five polyhydroxyalkanoate (PHA) depolymerase structural genes (phaZ1 to phaZ5) which enable the bacterium to utilize extracellular poly(3-hydroxybutyrate) (PHB), poly(3-hydroxyvalerate) (PHV), and related polyesters consisting of short-chain-length hxdroxyalkanoates (PHA(SCL)) as the sole sources of carbon and energy. Four genes (phaZ1, phaZ2, phaZ3, and phaZ5) encode PHB depolymerases C, B, D, and A, respectively. It was speculated that the remaining gene, phaZ4, encodes the PHV depolymerase (D. Jendrossek, A. Frisse, A. Behrends, M. Andermann, H. D. Kratzin, T. Stanislawski, and H. G. Schlegel, J. Bacteriol. 177:596-607, 1995). However, in this study, we show that phaZ4 codes for another PHB depolymeraes (i) by disagreement of 5 out of 41 amino acids that had been determined by Edman degradation of the PHV depolymerase and of four endoproteinase GluC-generated internal peptides with the DNA-deduced sequence of phaZ4, (ii) by the lack of immunological reaction of purified recombinant PhaZ4 with PHV depolymerase-specific antibodies, and (iii) by the low activity of the PhaZ4 depolymerase with PHV as a substrate. The true PHV depolymerase-encoding structural gene, phaZ6, was identified by screening a genomic library of P. lemoignei in Escherichia coli for clearing zone formation on PHV agar. The DNA sequence of phaZ6 contained all 41 amino acids of the GluC-generated peptide fragments of the PHV depolymerase. PhaZ6 was expressed and purified from recombinant E. coli and showed immunological identity to the wild-type PHV depolymerase and had high specific activities with PHB and PHV as substrates. To our knowledge, this is the first report on a PHA(SCL) depolymerase gene that is expressed during growth on PHV or odd-numbered carbon sources and that encodes a protein with high PHV depolymerase activity. Amino acid analysis revealed that PhaZ6 (relative molecular mass [M(r)], 43,610 Da) resembles precursors of other extracellular PHA(SCL) depolymerases (28 to 50% identical amino acids). The mature protein (M(r), 41,048) is composed of (i) a large catalytic domain including a catalytic triad of S(136), D(211), and H(269) similar to serine hydrolases; (ii) a linker region highly enriched in threonine residues and other amino acids with hydroxylated or small side chains (Thr-rich region); and (iii) a C-terminal domain similar in sequence to the substrate-binding domain of PHA(SCL) depolymerases. Differences in the codon usage of phaZ6 for some codons from the average codon usage of P. lemoignei indicated that phaZ6 might be derived from other organisms by gene transfer. Multialignment of separate domains of bacterial PHA(SCL) depolymerases suggested that not only complete depolymerase genes but also individual domains might have been exchanged between bacteria during evolution of PHA(SCL) depolymerases.     

Poly(3-Hydroxyvalerate) Depolymerase of Pseudomonas lemoignei

Pseudomonas lemoignei is equipped with at least five polyhydroxyalkanoate (PHA) depolymerase structural genes (phaZ1 to phaZ5) which enable the bacterium to utilize extracellular poly(3-hydroxybutyrate) (PHB), poly(3-hydroxyvalerate) (PHV), and related polyesters consisting of short-chain-length hxdroxyalkanoates (PHA_SCL) as the sole sources of carbon and energy. Four genes (phaZ1, phaZ2, phaZ3, and phaZ5) encode PHB depolymerases C, B, D, and A, respectively. It was speculated that the remaining gene, phaZ4, encodes the PHV depolymerase (D. Jendrossek, A. Frisse, A. Behrends, M. Andermann, H. D. Kratzin, T. Stanislawski, and H. G. Schlegel, J. Bacteriol. 177:596–607, 1995). However, in this study, we show that phaZ4 codes for another PHB depolymeraes (i) by disagreement of 5 out of 41 amino acids that had been determined by Edman degradation of the PHV depolymerase and of four endoproteinase GluC-generated internal peptides with the DNA-deduced sequence of phaZ4, (ii) by the lack of immunological reaction of purified recombinant PhaZ4 with PHV depolymerase-specific antibodies, and (iii) by the low activity of the PhaZ4 depolymerase with PHV as a substrate. The true PHV depolymerase-encoding structural gene, phaZ6, was identified by screening a genomic library of P. lemoignei in Escherichia coli for clearing zone formation on PHV agar. The DNA sequence of phaZ6 contained all 41 amino acids of the GluC-generated peptide fragments of the PHV depolymerase. PhaZ6 was expressed and purified from recombinant E. coli and showed immunological identity to the wild-type PHV depolymerase and had high specific activities with PHB and PHV as substrates. To our knowledge, this is the first report on a PHA_SCL depolymerase gene that is expressed during growth on PHV or odd-numbered carbon sources and that encodes a protein with high PHV depolymerase activity. Amino acid analysis revealed that PhaZ6 (relative molecular mass [M_r], 43,610 Da) resembles precursors of other extracellular PHA_SCL depolymerases (28 to 50% identical amino acids). The mature protein (M_r, 41,048) is composed of (i) a large catalytic domain including a catalytic triad of S₁₃₆, D₂₁₁, and H₂₆₉ similar to serine hydrolases; (ii) a linker region highly enriched in threonine residues and other amino acids with hydroxylated or small side chains (Thr-rich region); and (iii) a C-terminal domain similar in sequence to the substrate-binding domain of PHA_SCL depolymerases. Differences in the codon usage of phaZ6 for some codons from the average codon usage of P. lemoignei indicated that phaZ6 might be derived from other organisms by gene transfer. Multialignment of separate domains of bacterial PHA_SCL depolymerases suggested that not only complete depolymerase genes but also individual domains might have been exchanged between bacteria during evolution of PHA_SCL depolymerases.     

Pyrimidine biosynthesis in Pseudomonas oleovorans

AIMS: To investigate the regulation of de novo pyrimidine biosynthesis in the polyhydroxyalkanoate-producing bacterium Pseudomonas oleovorans at the level of enzyme synthesis and at the level of aspartate transcarbamoylase activity. METHODS AND RESULTS: The effect of pyrimidine supplementation on the pyrimidine biosynthetic pathway enzyme activities was analysed relative to carbon source. Two uracil auxotrophs of P. oleovorans were isolated that were deficient for aspartate transcarbamoylase or dihydroorotase activity. Pyrimidine limitation of these auxotrophs increased the de novo pathway activities to varying degrees depending on the pathway mutation and the carbon source utilized. At the level of aspartate transcarbamoylase activity, pyrophosphate and uridine ribonucleotides were found to be strongly inhibitory of the Ps. oleovorans enzyme. CONCLUSIONS: Pyrimidine biosynthesis is regulated in Ps. oleovorans. Taxonomically, the regulation of the pyrimidine biosynthetic pathway appeared dissimilar from previously studied Pseudomonas species. SIGNIFICANCE AND IMPACT OF THE STUDY: New insights regarding the regulation of nucleic acid metabolism are provided that could prove significant during the genetic manipulation of Ps. oleovorans to increase the synthesis of polyhydroxyalkanoates.     

需钠弧菌(Vibrio natriegens)合成聚羟基丁酸的研究

研究结果表明,V.natriegens可以利用葡萄糖,果糖,以及糖蜜为碳源合成聚羟基丁酸[Poly(3HB)] ,当以糖蜜为碳源时,积累的Poly(3HB)达到细胞干重的28．4％,实验结果还表明,Poly(3HB)的积累滞后于细胞生长,在培养前加入过量的碳源,不仅没有Poly(3HB)积累,还抑制细胞的生长,测定了与Poly(3HB)合成相关的PHA聚合酶,β-酮硫解酶和乙酰乙酰CoA还原酶的活性。结果表明,伴随Poly(3HB)合成,PHA聚合酶活性从无到有,β－酮硫解酶活性提高了10倍以上。进一步通过利用脂肪酸合成代谢抑制物－浅蓝菌素（cerulenin),研究了脂肪酸从头合成途径与Poly(3HB)合成途径的关系。发现浅蓝菌素能够明显降低细胞Poly(3HB)的累积。根据以上结果,推测在V.natrigens中可能存在两条代谢途径参与Poly(3HB)的合成。     

Efficient production of medium-chain-length poly(3-hydroxyalkanoates) from octane by Pseudomonas oleovorans: economic considerations

Poly(3-hydroxyalkanoates) (PHA) have the potential to become a biodegradable alternative for conventional plastics. In order to produce PHA at competitive costs in comparison with commonly used plastics, efficient PHA production systems will have to be developed. Poly(3-hydroxybutyrate) fermentations are well developed and in actual use on an industrial scale; medium-chain-length PHA (mcl-PHA) production is less well described, although the vast majority of all PHA known today are mcl-PHA. This paper compares and describes mcl-PHA production systems with respect to the volumetric productivity, the cellular PHA content and the polymer yield on carbon substrates. Nitrogen was shown to be the most effective limitation to trigger PHA formation in P. oleovorans after different nutrient limitations had been compared. By using an economic model for the calculation of PHA production costs, we show that it should be possible to produce octane-based mcl-PHA on a large scale (more than 1000 tonnes/year) at costs below U.S. $ 10 kg⁻¹. Received: 4 April 1997 / Accepted: 20 May 1997     

Accumulation of poly[(R)-3-hydroxyalkanoates] in Pseudomonas oleovorans during growth in batch and chemostat culture with different carbon sources

Pseudomonas oleovorans (ATCC 29347) was grown in batch and chemostat cultures with citrate, hexanoate, heptanoate, octanoate, and nonanoate as single carbon substrates. The growth medium for batch cultures was adjusted such that nitrogen (NH(4)(+)) limitation terminated the exponential-growth phase. During batch cultivation with octanoate or nonanoate the biomass continued to increase after depletion of ammonium due to the accumulation of medium-chain-length poly[(R)-3-hydroxyalkanoates] (mcl-PHAs). Additionally, a significant rate of mcl-PHA accumulation was also observed in the exponential-growth phase of batch cultures. It is well known that the accumulation of reserve materials is strongly dependent on the ratio of nutrients (here of carbon, C, and of nitrogen, N) and that in a batch culture the ratio of C:N is continuously changing. Therefore, we have also investigated the effect of defined ratios of C:N under constant cultivation conditions, namely at a fixed dilution rate (D) in a chemostat fed with different medium C:N ratios. These experiments were performed at a constant D of 0.2 h(-1). The concentration of the nitrogen source in the inflowing medium (N()) was kept constant, while its carbon concentration (C()) was increased stepwise, resulting in an increase of the medium carbon to nitrogen ratio (C()/N() ratio). The culture parameters and the cell composition of steady-state cultures were determined as a function of the C()/N() ratio in the feed medium. Mcl-PHA accumulation was detected during growth with the fatty acids, and three distinct regimes of growth limitation were discovered: In addition to carbon limitation at low, and nitrogen limitation at high C()/N() ratios, an intermediate growth regime of simultaneous limitation by carbon and nitrogen was detected where both substrates were used to completion. The width of this dual-nutrient-limited growth regime was dependent on the change in the yield factors for carbon and nitrogen (Y(X/C), Y(X/N)) measured during single-nutrient-limited growth.