Removal of Heavy Metals by Waste Tea Leaves from Aqueous Solution

In this paper, tea leaves were shown to be an effective, low‐cost biosorbent. Removal of lead, iron, zinc and nickel from 20 mg/L metal solution by dried biomass of waste tea leaves amounted to 96, 91, 72 and 58 %, respectively, at equilibrium, which followed Langmuir and Freundlich adsorption isotherms. Adsorption of metal was in the order of Pb > Fe > Zn > Ni from 5–100 mg/L of metal solution. From a multi‐metallic mixture, 92.5, 84 and 73.2 % of lead, iron and zinc, respectively, were removed. Fourier transform infrared (FTIR) studies indicated that the carboxyl group was involved in the binding of lead and iron, whereas the amine group was involved in the binding of nickel and zinc. A flow through sorption column packed with dried biomass demonstrated a sorption capacity of 73 mg Pb/g of biomass, indicating its potential in cleaning metal containing wastewater. The metal laden biomass obtained could be disposed off by incineration.     

Screening of waste biomass from Saccharomyces cerevisiae,Aspergillus oryzae and Bacillus lentus fermentations for removal of Cu,Zn and Cd by biosorption

Three by-products of fermentations containing Bacillus lentus, Aspergillus oryzae or Saccharomyces cerevisiae biomass were tested for the capacity to absorb Cu, Cd and Zn. The composition of the three biomasses was first determined and showed high contents of ashes in both B. lentus and A. oryzae biomass and high amounts of lipids in the bacterial biomass. Metal ion binding experiments were performed by contact of 0.1 g of biomass (protonated for all the metal tests and not protonated only for the Cd test) with 50 ml of solutions containing each of the metals in the concentration range from 10 to 500 mg/ml, at pH 4.5, 3.5 and 2.5. The final metal ion concentrations were determined using a plasma absorption spectrometer, and the metal removal levels for isotherm plots were determined using the Langmuir model. The results showed that B. lentus protonated biomass had the best sorption capacity for Cu and Cd, followed by protonated A. oryzae and S. cerevisiae biomass. The sorption of Zn was low for all tested biomasses, as also was the binding of all metals at acidic pH (2.5 and 3.5). A significant increase in Cd sorption was obtained using non-protonated biomass from B. lentus and A. oryzae.     

Impact of fluorides on the removal of heavy metals from an electroplating effluent using a flocculent brewer’s yeast strain of Saccharomyces cerevisiae

Abstract

Besides several toxic heavy metals, electroplating effluents can have in solution different cations and anions, which may influence heavy metals removal by the biomass. Among them, fluorides are commonly used in the electroplating industries and thus can be found in the respective wastewaters. In the present work, the effect of the presence of fluorides in the efficiency of chromium(III), copper(II) and nickel(II) removal, from an effluent, by heat-inactivated cells of a brewing flocculent strain of Saccharomyces cerevisiae was evaluated. The presence of fluorides severely decreased (>60%) the removal of chromium(III) by yeast biomass. This effect impaired the effective treatment of the effluent according to the US Environmental Protection Agency and the Portuguese law; conversely, a higher removal of copper(II) and nickel(II) was observed. This behaviour can be understood by metal speciation. In the presence of fluorides, chromium(III) was mainly complexed, becoming unavailable for yeast accumulation; this effect decreased the efficiency of chromium(III) removal. Thus, in the presence of fluorides, less chromium(III) is associated with biomass and consequently more yeast binding sites remain available for the uptake of other metals present in solution. This fact explains the increase of copper(II) and nickel(II) removal in the presence of fluorides.     

Release of Metal Ions from Orthodontic Appliances: An In Vitro Study

In this paper, we report the results of an in vitro experiment on the release of metal ions from orthodontic appliances composed of alloys containing iron, chromium, nickel, silicon, and molybdenum into artificial saliva. The concentrations of magnesium, aluminum, silicon, phosphorus, sulfur, potassium, calcium, titanium, vanadium, manganese, iron, cobalt, copper, zinc, nickel, and chromium were significantly higher in artificial saliva in which metal brackets, bands, and wires used in orthodontics were incubated. In relation to the maximum acceptable concentrations of metal ions in drinking water and to recommended daily doses, two elements of concern were nickel (573 vs. 15 μg/l in the controls) and chromium (101 vs. 8 μg/l in the controls). Three ion release coefficients were defined: α, a dimensionless multiplication factor; β, the difference in concentrations (in micrograms per liter); and γ, the ion release coefficient (in percent). The elevated levels of metals in saliva are thought to occur by corrosion of the chemical elements in the alloys or welding materials. The concentrations of some groups of dissolved elements appear to be interrelated.     

Potential of Live Spirulina platensis on Biosorption of Hexavalent Chromium and Its Conversion to Trivalent Chromium

Microalga biomass has been described worldwide according their capacity to realize biosorption of toxic metals. Chromium is one of the most toxic metals that could contaminate superficial and underground water. Considering the importance of Spirulina biomass in production of supplements for humans and for animal feed we assessed the biosorption of hexavalent chromium by living Spirulina platensis and its capacity to convert hexavalent chromium to trivalent chromium, less toxic, through its metabolism during growth. The active biomass was grown in Zarrouk medium diluted to 50% with distilled water, keeping the experiments under controlled conditions of aeration, temperature of 30°C and lighting of 1,800 lux. Hexavalent chromium was added using a potassium dichromate solution in fed-batch mode with the aim of evaluate the effect of several additions contaminant in the kinetic parameters of the culture. Cell growth was affected by the presence of chromium added at the beginning of cultures, and the best growth rates were obtained at lower metal concentrations in the medium. The biomass removed until 65.2% of hexavalent chromium added to the media, being 90.4% converted into trivalent chromium in the media and 9.6% retained in the biomass as trivalent chromium (0.931 mg.g^?1).     

<Emphasis Type="Italic">Chenopodium</Emphasis>: a prospective plant for phytoextraction

Leaf samples were collected from 40 accessions of Chenopodium spp. and assessed for six heavy metals (Fe, Zn, Cu, Ni, Cr and Cd) accumulation to explore the use of Chenopodium for phytoextraction of heavy metals. The results suggest that Chenopodium spp. have the ability to accumulate large quantities of heavy metals in the leaf tissues even when they are present in low concentrations in the soil. C. quinoa is a better accumulator of Ni, Cr and Cd than the rest of the species, while C. album accessions are good copper accumulators. Bioconcentration factor for chromium ranged from 0.36 (C. album “Chandanbathua”) to 6.57 (C. quinoa Ames 13719) with 13 accessions of C. quinoa scoring above the mean value. High heritability coupled with high genetic advance was recorded for Ni, Cr and Cd, which indicated a major role of additive gene action in the inheritance of these characters. Zinc showed significant positive association with iron (0.351**), nickel (0.659**), chromium (0.743**) and cadmium (0.288**). Nickel was significantly and negatively associated with copper (−0.663**), while it was positively and significantly correlated with chromium (0.682**) and cadmium (0.461**). Considering the accumulation efficiency of Chenopodium spp. with respect to heavy metals, this genus should be further explored for decontamination of metal polluted soils, with plant breeding playing an important role in evolving new plant types with higher capacity of heavy metal accumulation.     

Biosorption of heavy metals by Bacillus thuringiensis strain OSM29 originating from industrial effluent contaminated north Indian soil

The study was navigated to examine the metal biosorbing ability of bacterial strain OSM29 recovered from rhizosphere of cauliflower grown in soil irrigated consistently with industrial effluents. The metal tolerant bacterial strain OSM29 was identified as Bacillus thuringiensis following 16S rRNA gene sequence analysis. In the presence of the varying concentrations (25–150 mgl⁻¹) of heavy metals, such as cadmium, chromium, copper, lead and nickel, the B. thuringiensis strain OSM29 showed an obvious metal removing potential. The effect of certain physico-chemical factors such as pH, initial metal concentration, and contact time on biosorption was also assessed. The optimum pH for nickel and chromium removal was 7, while for cadmium, copper and lead, it was 6. The optimal contact time was 30 min. for each metal at 32 ± 2 °C by strain OSM29. The biosorption capacity of the strain OSM29 for the metallic ions was highest for Ni (94%) which was followed by Cu (91.8%), while the lowest sorption by bacterial biomass was recorded for Cd (87%) at 25 mgl⁻¹ initial metal ion concentration. The regression coefficients obtained for heavy metals from the Freundlich and Langmuir models were significant. The surface chemical functional groups of B. thuringiensis biomass identified by Fourier transform infrared (FTIR) were amino, carboxyl, hydroxyl, and carbonyl groups, which may be involved in the biosorption of heavy metals. The biosorption ability of B. thuringiensis OSM29 varied with metals and was pH and metal concentration dependent. The biosorption of each metal was fairly rapid which could be an advantage for large scale treatment of contaminated sites.     

Biosorption of chromium(VI) by spent cyanobacterial biomass from a hydrogen fermentor using Box-Behnken model

The study explores utilization of waste cyanobacterial biomass of Nostoc linckia from a lab-scale hydrogen fermentor for the biosorption of Cr(VI) from aqueous solution. The biomass immobilized in alginate beads was used for removal of the metal in batch mode optimizing the process conditions adopting response surface methodology (RSM). Kinetic studies were done to get useful information on the rate of chromium adsorption onto the cyanobacterial biomass, which was found to follow pseudo second-order model. Four important process parameters including initial metal concentration (10-100 mg/L), pH (2-6), temperature (25-45 °C) and cyanobacterial dose (0.1-2.0 g) were optimized to obtain the best response of Cr(VI) removal using the statistical Box-Behnken design. The response surface data indicated maximum Cr(VI) biosorption at pH 2-4 with different initial concentrations of the metal in the aqueous solution. The biosorbent could remove 80-90% chromium from solutions with initial metal concentration of 10-55 mg/L. Involvement of the surface characteristics of the biomass was studied through its scanning electron micrographs and Fourier transform infrared (FTIR) analysis.     

Immobilization of blue green microalgae on loofa sponge to biosorb cadmium in repeated shake flask batch and continuous flow fixed bed column reactor system

Summary An indigenous strain of blue green microalga, Synechococcus sp., isolated from wastewater, was immobilized onto loofa sponge discs and investigated as a potential biosorbent for the removal of cadmium from aqueous solutions. Immobilization has enhanced the sorption of cadmium and an increase of biosorption (21%) at equilibrium was noted as compared to free biomass. The kinetics of cadmium biosorption was extremely rapid, with (96%) of adsorption within the first 5 min and equilibrium reached at 15 min. Increasing initial pH or initial cadmium concentration resulted in an increase in cadmium uptake. The maximum biosorption capacity of free and loofa immobilized biomass of Synechococcus sp. was found to be 47.73 and 57.76 mg g⁻¹ biomass respectively. The biosorption equilibrium was well described by Langmuir adsorption isotherm model. The biosorbed cadmium was desorbed by washing the immobilized biomass with dilute HCl (0.1 M) and desorbed biomass was reused in five biosorption–desorption cycles without an apparent decrease in its metal biosorption capacity. The metal removing capacity of loofa immobilized biomass was also tested in a continuous flow fixed-bed column bioreactor and was found to be highly effective in removing cadmium from aqueous solution. The results suggested that the loofa sponge-immobilized biomass of Synechococcus sp. could be used as a biosorbent for an efficient removal of heavy metal ions from aqueous solution.     

Bioleaching of nickel from equilibrium fluid catalytic cracking catalysts

Summary This study investigates the possibility of reusing metal-contaminated equilibrium fluid catalytic cracking (FCC) catalyst after bioleaching. Leaching with Aspergillus niger culture was found to be more effective in the mobilization of nickel from the catalyst particles compared to chemical leaching with citric acid. Bioleaching achieved 32% nickel removal whereas chemical leaching achieved only 21% nickel removal from catalyst particles. The enhanced nickel removal from the catalysts in the presence of A. niger culture was attributed to the biosorption ability of the fungal mycelium and to the higher local concentration of citric acid on the catalyst surface. It was found that 9% of solubilized nickel in the liquid medium was biosorbed to fungal biomass. After nickel leaching with A. niger culture, the hydrogen-to-methane molar ratio and coke yield, which are the measures of dehydrogenation reactions catalysed by nickel during cracking reactions, decreased significantly.     

Mechanism of Biosorption of Heavy Metals by Mucor rouxii

Fungi such as Aspergillus niger and Mucor rouxii are capable of removing heavy metals from aqueous solutions. The role various functional groups play in the cell wall of M. rouxii in metal biosorption of lead, cadmium, nickel and zinc was investigated in this paper. The biomass was chemically treated to modify the functional carboxyl, amino and phosphate groups. These modifications were examined by means of infrared spectroscopy. It was found that an esterification of the carboxyl groups and phosphate and a methylation of the amine groups significantly decreased the biosorption of the heavy metals studied. Thus, the carboxylate, amine and phosphate groups were recognized as important in the biosorption of metal ions by M. rouxii biomass. The role the lipids fraction play was not significant. The study showed that Na, K, Ca and Mg ions were released from the biomass after biosorption of Pb, Cd, Ni and Zn, indicating that ion exchange was a key mechanism in the biosorption of metal ions by M. rouxii biomass.     

Potential of Spartina maritima in Restored Salt Marshes for Phytoremediation of Metals in a Highly Polluted Estuary

Sedimentary abiotic environment, and concentration and stock of nine metals were analyzed in vegetation and sediments to evaluate the phytoremediation capacity of restored Spartina maritima prairies in the highly polluted Odiel Marshes (SW Iberian Peninsula). Samples were collected in two 10 –m long rows parallel to the tidal line at two sediments depths (0–2 cm and 2–20 cm). Metal concentrations were measured by inductively coupled plasma spectroscopy. Iron, aluminum, copper, and zinc were the most concentrated metals. Every metal, except nickel, showed higher concentration in the root zone than at the sediment surface, with values as high as ca. 70 g Fe kg^–1. The highest metal concentrations in S. maritima tissues were recorded in its roots (maximum for iron in Spartina roots: 4160.2 ± 945.3 mg kg^–1). Concentrations of aluminum and iron in leaves and roots were higher than in superficial sediments. Rhizosediments showed higher concentrations of every metal than plant tissues, except for nickel. Sediment metal stock in the first 20 cm deep was ca. 170.89 t ha^–1. Restored S. maritima prairies, with relative cover of 62 ± 6%, accumulated ca. 22 kg metals ha^–1. Our results show S. maritima to be an useful biotool for phytoremediation projects in European salt marshes.     

Biosorption of Cr(VI) onto marine Aspergillus niger: experimental studies and pseudo-second order kinetics

The removal of hexavalent chromium from aqueous solution was studied in batch experiments using dead biomass of three different species of marine Aspergillus after alkali treatment. All the cultures exhibited potential to remove Cr(VI), out of which, Aspergillus niger was found to be the most promising one. This culture was further studied employing variation in pH, temperature, metal ion concentration and biomass concentration with a view to understand the effect of these parameters on biosorption of Cr(VI). Higher biosorption percentage was evidenced at lower initial concentration of Cr(VI) ion, while the sorption capacity of the biomass increased with rising concentration of ions. Biomass as low as 0.8 g l⁻¹ could biosorb 95% Cr(VI) ions within 2,880 min from an aqueous solution of 400 mg l⁻¹ Cr(VI) concentration. Optimum pH and temperature for Cr(VI) biosorption were 2.0 and 50°C, respectively. Kinetic studies based on pseudo second order models like Sobkowsk and Czerwinski, Ritchie, Blanchard and Ho and Mckay rate expressions have also been carried out. The nature of the possible cell–metal ion interactions was evaluated by FTIR, SEM and EDAX analysis.     

Nickel accumulation and nickel oxalate precipitation by Aspergillus niger

A strain of Aspergillus niger isolated from a metal-contaminated soil was able to grow in the presence of cadmium, chromium, cobalt, copper, and unusually high levels of nickel on solid (8.0 mM) and in liquid (6.5 mM) media. This fungus removed >98% of the nickel from liquid medium after 100 h of growth but did not remove the other metals, as determined by inductively coupled plasma spectroscopy. Experiments with non-growing, live fungal biomass showed that nickel removal was not due to biosorption alone, as little nickel was bound to the biomass at the pH values tested. Furthermore, when the protonophore carbonyl cyanide p-(trifluoremetoxy) phenyl hydrazone (FCCP) was added to the actively growing fungus nickel removal was inhibited, supporting the hypothesis that energy metabolism is essential for metal removal. Analytical electron microscopy of thin-sectioned fungal biomass revealed that metal removed from the broth was localized in the form of small rectangular crystals associated with the cell walls and also inside the cell. X-ray and electron diffraction analysis showed that these crystals were nickel oxalate dihydrate.     

Heavy metal removal from aqueous solution by wasted biomass from a combined AS-biofilm process

This study evaluated the capability of metal biosorption by wasted biomass from a combined anaerobic-anoxic-oxic (A2O)-biofilm process with simultaneous nitrogen and phosphorus removal. Zinc, cadmium and nickel were rapidly adsorbed in 20 min by the harvested sludge from a continuous-flow pilot-plant. Biosorption equilibrium was then reached in 6h. The biosorption isotherm showed that metal biosorption behavior had fitted well to the Freundlich isotherm, but not Langmuir isotherm. The capacity constants k of Freundlich model for nickel, zinc and cadmium were 0.471, 0.298 and 0.726, respectively; the affinity constants 1/n were 0.444, 0.722 and 0.718, respectively. The order of metal affinity for the wasted biomass was Zn > Cd > Ni, which was in conformity to the other biosorption results with different biological sludge.     

Trace metals in edible marine molluscs and crustaceans from Lebanon

Samples of the edible tissue of cephalopod molluscs (cuttlefish, squid, octopus) and crustaceans (lobster, shrimp) collected off the coast of Lebanon were found to concentrate similar levels of cadmium, copper, nickel, and chromium. Lead and zinc were highest in the cephalopods and iron was highest in the crustaceans.The molluscs collected from Beirut had higher levels of many metals than those taken from the other locations. The Beirut octopus had higher lead, cadmium, copper, iron, and chromium. Lead, cadmium, and copper were also highest in the Beirut cuttlefish while iron and zinc were elevated. The crustaceans from Beirut showed no strong tendency to concentrate higher metal levels, except for the Beirut lobster which had higher copper than the other samples.In the cuttlefish, the analysis of bone showed generally higher cadmium, zinc, nickel, and chromium but lower copper and iron than the muscle. However, at Beirut, the bone samples had much higher iron. Levels of most metals in the exoskeletons of the lobster and shrimp were quite similar to those in the muscle tissue with the exception of iron in the lobster which was highest in the exoskeleton, and zinc in both crustaceans, which was more highly concentrated in the muscle.     

Competitive binding of Fe<Superscript>3+</Superscript>, Cr<Superscript>3+</Superscript>, and Ni<Superscript>2+</Superscript> to transferrin

Competitive binding of Fe³⁺, Cr³⁺, and Ni²⁺ to transferrin (Tf) was investigated at various physiological iron to Tf concentration ratios. Loading percentages for these metal ions are based on a two M ⁿ⁺ to one Tf (i.e., 100% loading) stoichiometry and were determined using a particle beam/hollow cathode–optical emission spectroscopy (PB/HC-OES) method. Serum iron concentrations typically found in normal, iron-deficient, iron-deficient from chronic disease, iron-deficient from inflammation, and iron-overload conditions were used to determine the effects of iron concentration on iron loading into Tf. The PB/HC-OES method allows the monitoring of metal ions in competition with Fe³⁺ for Tf binding. Iron-overload concentrations impeded the ability of chromium (15.0 μM) or nickel (10.3 μM) to load completely into Tf. Low Fe³⁺ uptake by Tf under iron-deficient or chronic disease iron concentrations limited Ni²⁺ loading into Tf. Competitive binding kinetic studies were performed with Fe³⁺, Cr³⁺, and Ni²⁺ to determine percentages of metal ion uptake into Tf as a function of time. The initial rates of Fe³⁺ loading increased in the presence of nickel or chromium, with maximal Fe³⁺ loading into Tf in all cases reaching approximately 24%. Addition of Cr³⁺ to 50% preloaded Fe³⁺–Tf showed that excess chromium (15.0 μM) displaced roughly 13% of Fe³⁺ from Tf, resulting in 7.6 ± 1.3% Cr³⁺ loading of Tf. The PB/HC-OES method provides the ability to monitor multiple metal ions competing for Tf binding and will help to understand metal competition for Tf binding.     

Removal of heavy metals by an Aspergillus terreus strain immobilized in a polyurethane matrix

AIMS: The aim was to investigate the biosorption of chromium, nickel and iron from metallurgical effluents, produced by a steel foundry, using a strain of Aspergillus terreus immobilized in polyurethane foam. METHODS AND RESULTS: A. terreus UFMG-F01 was immobilized in polyurethane foam and subjected to biosorption tests with metallurgical effluents. Maximal metal uptake values of 164.5 mg g(-1) iron, 96.5 mg g(-1) chromium and 19.6 mg g(-1) nickel were attained in a culture medium containing 100% of effluent stream supplemented with 1% of glucose, after 6 d of incubation. CONCLUSIONS: Microbial populations in metal-polluted environments include fungi that have adapted to otherwise toxic concentrations of heavy metals and have become metal resistant. In this work, a strain of A. terreus was successfully used as a metal biosorbent for the treatment of metallurgical effluents. SIGNIFICANCE AND IMPACT OF THE STUDY: A. terreus UFMG-F01 was shown to have good biosorption properties with respect to heavy metals. The low cost and simplicity of this technique make its use ideal for the treatment of effluents from steel foundries.     

Biosorption of hexavalent chromium from aqueous solution by a tropical basidiomycete BDT-14 (DSM 15396)

Summary A tropical white-rot basidiomycete, BDT-14 (DSM 15396) was investigated for its chromium (VI) biosorption potential from an aqueous solution. Pre-treatment of fungal biomass with acid resulted in 100% metal adsorption compared to only 26.64% adsorption without any pre-treatment. Chromium adsorption was a rapid process at early exposure resulting in 60% chromium removal within the first 2 h of exposure. An increase in biomass showed an increase in the total metal ions adsorption but a decrease in specific uptake of metal ions. The concentrations of chromium had a pronounced effect on the rate of adsorption. The adsorption efficiency was 100% when the initial Cr (VI) concentration was 100 mg l⁻¹ with 1,000 mg biomass. Only 47.5% adsorption was observed with 500 mg l⁻¹ Cr (VI) concentration. The adsorption data fit well with the Langmuir and Freundlich isotherm models. Comprehensive characterization of parameters indicates BDT−14 biomass as a promising material for Cr (VI) adsorption.     

Biosorption of chromium (Cr(III)/Cr(VI)) on the residual microalga Nannochloris oculata after lipid extraction for biodiesel production

In order to increase the economic feasibility of biodiesel production from microalgae, the residual biomass after biodiesel production can be utilized as biosorbent for heavy metal removal. In this study, biosorption of chromium by residual Nannochloris oculata after lipid extraction was investigated. Increased surface area of N. oculata was observed after lipid extraction. Cr(III) removal increased as the pH increased from 2 to 6, while Cr(VI) removal was highest at pH 2 and it decreased with the increase in pH. Cr(VI) was reduced to Cr(III) in the presence of biomass under acidic conditions; X-ray photoelectron spectroscopy revealed that the converted Cr(III) was bound to the biomass. Chromium removal was significantly enhanced at high chromium concentrations, which indicates that surface reactions may occur at high chromium/biomass ratios. FTIR study indicated that phosphate and carboxyl functional groups of the biomass were mainly responsible for chromium binding.