λ噬菌体穿孔素(holin) 蛋白触发裂菌的分子机制

穿孔素-裂解酶二元裂解系统是双链DNA噬菌体普遍采用的裂菌模式,以λ噬菌体为例,系统地揭示了噬菌体穿孔素的结构与功能。λ噬菌体的S基因的特征是呈双起始基序(dual-start motif),编码穿孔素(holin)S105和抗穿孔素(antiholin)S107,通过二者不同水平的表达及相互作用,触发裂菌过程。作者综述了λ噬菌体穿孔素的膜拓扑结构和成孔机制的最新研究进展,并展望了穿孔素的研究热点和应用前景。     

Sizing the holin lesion with an endolysin-beta-galactosidase fusion

Double-stranded DNA phages require two proteins for efficient host lysis: the endolysin, a muralytic enzyme, and the holin, a small membrane protein. In an event that defines the end of the vegetative cycle, the lambda holin S acts suddenly to permeabilize the membrane. This permeabilization enables the R endolysin to attack the cell wall, after which cell lysis occurs within seconds. A C-terminal fusion of the R endolysin with full-length beta-galactosidase (beta-Gal) was tested for lytic competence in the context of the late-gene expression system of an induced lambda lysogen. Under these conditions, the hybrid R-beta-Gal product, an active tetrameric beta-Gal greater than 480 kDa in mass, was fully functional in lysis mediated by the S holin. Western blot analysis demonstrated that the lytic competence was not due to the proteolytic release of the endolysin domain of the R-beta-Gal fusion protein. The ability of this massive complex to be released by the S holin suggests that S causes a generalized membrane disruption rather than a regular oligomeric membrane pore. Similar results were obtained with an early lysis variant of the S holin and also in parallel experiments with the T4 holin, T, in an identical lambda context. However, premature holin lesions triggered by depolarization of the membrane were nonpermissive for the hybrid endolysin, indicating that these premature lesions constituted less-profound damage to the membrane. Finally, a truncated T holin functional in lysis with the endolysin is completely incompetent for lysis with the hybrid endolysin. A model for the formation of the membrane lesion within homo-oligomeric rafts of holin proteins is discussed.     

Solubilization and delivery by GroEL of megadalton complexes of the lambda holin

GroEL can solubilize membrane proteins by binding them in its hydrophobic cavity when detergent is removed by dialysis. The best-studied example is bacteriorhodopsin, which can bind in the GroEL chaperonin at two molecules per tetradecamer. Applying this approach to the holin and antiholin proteins of phage lambda, we find that both proteins are solubilized by GroEL, in an ATP-sensitive mode, but to vastly different extents. The antiholin product, S107, saturates the chaperonin at six molecules per tetradecameric complex, whereas the holin, S105, which is missing the two N-terminal residues of S107, forms a hyper-solubilization complex with up to 350 holin molecules per GroEL, or approximately 4 MDa of protein per 0.8 MDa tetradecamer. Gel filtration chromatography and immunoprecipitation experiments confirmed the existence of complexes of the predicted masses for both S105 and S107 solubilization. For S105, negatively stained electron microscopic images show structures consistent with protein shells of the holin assembled around the chaperonin tetradecamer. Importantly, S105 can be delivered rapidly and efficiently to artificial liposomes from these complexes. In these delivery experiments, the holin exhibits efficient membrane-permeabilizing activity. The S107 antiholin can block formation of the hypersolubilization complexes, suggesting that their formation is related to an oligomerization step intrinsic to holin function.     

Molecular function of the dual-start motif in the λ S holin

The lambda S gene represents the prototype of holin genes with a dual-start motif, which leads to the synthesis of two polypeptides, S105 and S107. They differ at their N-terminus by only two amino acids, Met-1 and Lys-2, at the beginning of the longer product. Despite the minor difference, the two proteins have opposing functions in lysis, with protein S107 being an inhibitor and protein S105 being an effector of 'hole formation' in the inner membrane. Here, we have studied the molecular mechanism underlying the 'lysis clock' contributed by the dual-start motif. We have used protein fusions in which the secretory signal sequence of the M13 procoat protein VIII has been abutted to the N-terminal Met residues of S105 and S107 respectively. S-dependent 'hole formation' required removal of the signal sequence in both fusion proteins, as both the VIII-S105 and the VIII-S107 fusion proteins were non-functional when leader peptidase cleavage was inhibited. These results strongly supported the hypothesis that functional assembly of S proteins requires translocation of their N-terminus to the periplasm. Using signal sequence cleavage as a measure of translocation, we observed that the translocation kinetics of the N-terminus of the S107 moiety was reduced about threefold when compared with the N-terminus of the S105 moiety. Moreover, depolarization of the membrane resulted in an immediate cleavage of the signal sequence and 'hole formation' exerted by the S107 moiety of the VIII-S107 fusion protein. A model is presented in which S107 with a reversed topology of its N-terminus interacts with S105 and poisons 'hole formation'. Upon depolarization of the membrane, translocation of the N-terminus of S107 to the periplasm results in the functional assembly of S proteins, i.e. 'hole formation'.     

Genetic and biochemical analysis of dimer and oligomer interactions of the lambda S holin

Bacteriophage lambda uses a holin-endolysin system for host cell lysis. R, the endolysin, has muralytic activity. S, the holin, is a small membrane protein that permeabilizes the inner membrane at a precisely scheduled time after infection and allows the endolysin access to its substrate, resulting in host cell lysis. lambda S has a single cysteine at position 51 that can be replaced by a serine without loss of the holin function. A collection of 27 single-cysteine products of alleles created from lambda S(C51S) were tested for holin function. Most of the single-cysteine variants retained the ability to support lysis. Mutations with the most defective phenotype clustered in the first two hydrophobic transmembrane domains. Several lines of evidence indicate that S forms an oligomeric structure in the inner membrane. Here we show that oligomerization does not depend on disulfide bridge formation, since the cysteineless S(C51S) (i) is functional as a holin and (ii) shows the same oligomerization pattern as the parental S protein. In contrast, the lysis-defective S(A52V) mutant dimerizes but does not form cross-linkable oligomers. Again, dimerization does not depend on the natural cysteine, since the cysteineless lysis-defective S(A52V/C51S) is found in dimers after treatment of the membrane with a cross-linking agent. Furthermore, under oxidative conditions, dimerization via the natural cysteine is very efficient for S(A52V). Both S(A52V) (dominant negative) and S(A48V) (antidominant) interact with the parental S protein, as judged by oxidative disulfide bridge formation. Thus, productive and unproductive heterodimer formation between the parental protein and the mutants S(A52V) and S(A48V), respectively, may account for the dominant and antidominant lysis phenotypes. Examination of oxidative dimer formation between S variants with single cysteines in the hydrophobic core of the second membrane-spanning domain revealed that positions 48 and 51 are on a dimer interface. These results are discussed in terms of a three-step model leading to S-dependent hole formation in the inner membrane.     

Charged amino-terminal amino acids affect the lethal capacity of Lambda lysis proteins S107 and S105

The lysis inhibitor protein S107 and the lysis effector protein S105 start at Met codons 1 and 3 of the Lambda S gene, respectively. The antagonistic action of both proteins precisely schedules lysis by formation of a non-specific lesion in the inner membrane through which the Lambda-encoded murein transglycosylase can pass. Here, we show that the main difference between lysis—effector and lysis—inhibitor is the degree by which an energized membrane inhibits either protein from hole formation. To dissect the structural parameters responsible for intrinsic inhibition of both proteins, charged amino acids were replaced proximal to the first putative membrane-spanning region in both S proteins. Our results show that the distribution of amino-terminal charged amino acids as well as the total amino-terminal net charge of S107 and S105 influence their lethal potential. The data are interpreted in terms of a model in which the electrostatic status of the amino-terminus of both S107 and S105 is an important feature affecting their conf or mat ional change required for formation of the S-dependent hole.     

Identification and mutational analysis of bacteriophage PRD1 holin protein P35

Holin proteins are phage-induced integral membrane proteins which regulate the access of lytic enzymes to host cell peptidoglycan at the time of release of progeny viruses by host cell lysis. We describe the identification of the membrane-containing phage PRD1 holin gene (gene XXXV). The PRD1 holin protein (P35, 12.8 kDa) acts similarly to its functional counterpart from phage lambda (gene S), and the defect in PRD1 gene XXXV can be corrected by the presence of gene S of lambda. Several nonsense, missense, and insertion mutations in PRD1 gene XXXV were analyzed. These studies support the overall conclusion that the charged amino acids at the protein C terminus are involved in the timing of host cell lysis.     

The C-terminal sequence of the lambda holin constitutes a cytoplasmic regulatory domain

The C-terminal domains of holins are highly hydrophilic and contain clusters of consecutive basic and acidic residues, with the overall net charge predicted to be positive. The C-terminal domain of lambda S was found to be cytoplasmic, as defined by protease accessibility in spheroplasts and inverted membrane vesicles. C-terminal nonsense mutations were constructed in S and found to be lysis proficient, as long as at least one basic residue is retained at the C terminus. In general, the normal intrinsic scheduling of S function is deranged, resulting in early lysis. However, the capacity of each truncated lytic allele for inhibition by the S107 inhibitor product of S is retained. The K97am allele, when incorporated into the phage context, confers a plaque-forming defect because its early lysis significantly reduces the burst size. Finally, a C-terminal frameshift mutation was isolated as a suppressor of the even more severe early lysis defect of the mutant SA52G, which causes lysis at or before the time when the first phage particle is assembled in the cell. This mutation scrambles the C-terminal sequence of S, resulting in a predicted net charge increase of +4, and retards lysis by about 30 min, thus permitting a viable quantity of progeny to accumulate. Thus, the C-terminal domain is not involved in the formation of the lethal membrane lesion nor in the "dual-start" regulation conserved in lambdoid holins. Instead, the C-terminal sequence defines a cytoplasmic regulatory domain which affects the timing of lysis. Comparison of the C-terminal sequences of within holin families suggests that these domains have little or no structure but act as reservoirs of charged residues that interact with the membrane to effect proper lysis timing.     

Characterization of the dual start motif of a class II holin gene

Holins are small membrane proteins that, at a genetically programmed time in a bacteriophage infective cycle, allow bacteriolytic enzymes, or endolysins, to escape to the periplasm and to attack the cell wall. Most holins fall into two sequence classes, I and II, based on the number of potential transmembrane domains (three for class I and two for class II). The prototype class I holin gene, S  ^λ, has a dual start motif and encodes not only the effector holin, S^λ105, but also an inhibitor, S^λ107, with a Met–Lys … extension at the terminus. The prototype class II holin gene of phage 21, S  ²¹, begins with the motif Met–Lys–Ser–Met … , and a potential RNA secondary structure overlaps the Shine–Dalgarno sequence. Here, we demonstrate that (i) two protein products are elaborated from S  ²¹, S²¹71 and S²¹68; (ii) the shorter product is required for lysis; (iii) the longer product, S²¹71, inhibits S  ²¹ function; and (iv) the Lys-2 residue is important for the inhibitor function. Moreover, the RNA stem–loop structure is involved in the downregulation of S²¹71 synthesis. However, our results suggest that, in S  ²¹, different segments of the single consensus Shine–Dalgarno sequence serve the two translational starts. These results show that the dual start motifs of class II holin genes are functionally homologous to those of class I holin genes.     

Clocking out: modeling phage-induced lysis of Escherichia coli

Phage lambda lyses the host Escherichia coli at a precisely scheduled time after induction. Lysis timing is determined by the action of phage holins, which are small proteins that induce hole formation in the bacterium's cytoplasmic membrane. We present a two-stage nucleation model of lysis timing, with the nucleation of condensed holin rafts on the inner membrane followed by the nucleation of a hole within those rafts. The nucleation of holin rafts accounts for most of the delay of lysis after induction. Our simulations of this model recover the accurate lysis timing seen experimentally and show that the timing accuracy is optimal. An enhanced holin-holin interaction is needed in our model to recover experimental lysis delays after the application of membrane poison, and such early triggering of lysis is possible only after the inner membrane is supersaturated with holin. Antiholin reduces the delay between membrane depolarization and lysis and leads to an earlier time after which triggered lysis is possible.     

Functional regulation of the Listeria monocytogenes bacteriophage A118 holin by an intragenic inhibitor lacking the first transmembrane domain

We have dissected the functional properties of the holin encoded by Listeria monocytogenes bacteriophage A118. Native hol118 was cloned into lambdaDeltaSthf, devoid of the S holin, and tested in an E. coli background. Surprisingly, it caused very late cell lysis, beginning at 80 min after induction. Immunological analyses demonstrated that Hol118 appears in the cytoplasmic membrane shortly after infection. The hol118 gene features a dual start motif similar to lambda S. Therefore, different N-terminally modified Hol118 variants were tested. However, in contrast to lambda S, inactivation of AUG-1 or AUG-2 showed no significant influence on lysis timing. In addition, Hol118-mediated lysis could not be triggered by energy poisons, indicating a functional regulation different from that of S. Toeprinting assays on hol118 mRNA revealed an unexpected translational start codon (AUG-3) at nucleotide position 40. We demonstrated by in vitro and in vivo approaches that the predicted Hol118(83) product is actually produced together with the full-length polypeptide. However, although the truncated holin lacking its first transmembrane domain appeared in the cytoplasmic membrane, it was shown to be functionally deficient and unable to support lambda R-mediated lysis. In contrast, specific mutations introduced to abolish translation initiation at AUG-3 drastically accelerated lysis, pointing to an inhibitor function of Hol118(83). This hypothesis was supported by the observation that hol118(83) inhibited holin function when expressed in trans. A deviation from the lambda S paradigm is proposed, which represents a new model of holin functional regulation: the intragenic, in frame translated Hol118(83) product, which is devoid of its first transmembrane domain, acts as a functional inhibitor and constitutes a key part of the lysis clock of A118. Presence of the dominant inhibitor function also explains the long latent period of A118, where the onset of lysis takes about 70 min, more than twice the time needed by lambda.     

Functional assembly of the λ S holin requires periplasmic localization of its N-terminus

Bacteriophage-λ-induced host-cell lysis requires two phage-encoded proteins, the S holin and the R transglycosylase. At a specific time during infection, the holin forms a lesion in the cytoplasmic membrane that permits access of the R protein to its substrate, the peptidoglycan. The λS gene represents the prototype of holin genes with a dual-start motif; they encode two proteins, a lysis effector and a lysis inhibitor. Although the two S proteins differ only by two amino acids (Met-1 and Lys-2) at the N-terminus, the longer product (S107) acts as an inhibitor of the lysis effector (S105). The functional difference between the proteins has been previously ascribed to the Lys-2 residue in S107. It was therefore of interest to determine the subcellular localization of the N-terminus of either S protein. To study the membrane topology of the S proteins, we used the topology probe TEM β-lactamase and an N-terminal tag derived from the Pseudomonas aeruginosa phage Pf3 coat protein. We show that both S proteins have a type III (N_out/C_in) topology. The results provide insight into the regulatory mechanism imposed by the dual-start motif and will be discussed in terms of a model for temporal regulation of the S-dependent “hole” in the membrane. Received: 28 January 1999 / Accepted: 23 April 1999     

The holin of bacteriophage lambda forms rings with large diameter

Holins control the length of the infection cycle of tailed phages (the Caudovirales) by oligomerizing to form lethal holes in the cytoplasmic membrane at a time dictated by their primary structure. Nothing is currently known about the physical basis of their oligomerization or the structure of the oligomers formed by any known holin. Here we use electron microscopy and single-particle analysis to characterize structures formed by the bacteriophage λ holin (S105) in vitro . In non-ionic or mild zwitterionic detergents, purified S105, but not the lysis-defective variant S105_A52V, forms rings of at least two size classes, the most common having inner and outer diameters of 8.5 and 23 nm respectively, and containing approximately 72 S105 monomers. The height of these rings, 4 nm, closely matches the thickness of the lipid bilayer. The central channel is of unprecedented size for channels formed by integral membrane proteins, consistent with the non-specific nature of holin-mediated membrane permeabilization. S105 present in detergent-solubilized rings and in inverted membrane vesicles showed similar sensitivities to proteolysis and cysteine-specific modification, suggesting that the rings are representative of the lethal holes formed by S105 to terminate the infection cycle and initiate lysis.     

Purification and Biochemical Characterization of the Lambda Holin

Holins are small phage-encoded cytoplasmic membrane proteins, remarkable for their ability to make membranes permeable in a temporally regulated manner. The purification of S105, the λ holin, and one of the two products of gene S is described. Because the wild-type S105 holin could be only partially purified from membrane extracts by ion-exchange chromatography, an oligohistidine tag was added internally to the S105 sequence for use in immobilized metal affinity chromatography. An acceptable site for the tag was found between residues 94 and 95 in the highly charged C-terminal domain of S. This allele, designated S105H94, had normal lysis timing under physiological expression conditions. The S105H94 protein was overproduced, purified, and characterized by circular dichroism spectroscopy, which revealed approximately 40% alpha-helix conformation, consistent with the presence of two transmembrane helices. The purified protein was then used to achieve release of fluorescent dye loaded in liposomes in vitro, whereas protein from an isogenic construct carrying an S mutation known to abolish hole formation was inactive in this assay. These results suggest that S is a bitopic membrane protein capable of forming aqueous holes in bilayers.     

Functional Analysis of a Class I Holin,P2 Y

Y is the putative holin gene of the paradigm coliphage P2 and encodes a 93-amino-acid protein. Y is predicted to be an integral membrane protein that adopts an N-out C-in membrane topology with 3 transmembrane domains (TMDs) and a highly charged C-terminal cytoplasmic tail. The same features are observed in the canonical class I lambda holin, the S105 protein of phage lambda, which controls lysis by forming holes in the plasma membrane at a programmed time. S105 has been the subject of intensive genetic, cellular, and biochemical analyses. Although Y is not related to S105 in its primary structure, its characterization might prove useful in discerning the essential traits for holin function. Here, we used physiological and genetic approaches to show that Y exhibits the essential holin functional criteria, namely, allele-specific delayed-onset lethality and sensitivity to the energization of the membrane. Taken together, these results suggest that class I holins share a set of unusual features that are needed for their remarkable ability to program the end of the phage infection cycle with precise timing. However, Y holin function requires the integrity of its short cytoplasmic C-terminal domain, unlike for S105. Finally, instead of encoding a second translational product of Y as an antiholin, as shown for lambda S107, the P2 lysis cassette encodes another predicted membrane protein, LysA, which is shown here to have a Y-specific antiholin character.     

Probing the Structure of the S105 Hole

For most phages, holins control the timing of host lysis. During the morphogenesis period of the infection cycle, canonical holins accumulate harmlessly in the cytoplasmic membrane until they suddenly trigger to form lethal lesions called holes. The holes can be visualized by cryo-electron microscopy and tomography as micrometer-scale interruptions in the membrane. To explore the fine structure of the holes formed by the lambda holin, S105, a cysteine-scanning accessibility study was performed. A collection of S105 alleles encoding holins with a single Cys residue in different positions was developed and characterized for lytic function. Based on the ability of 4-acetamido-4′-((iodoacetyl) amino) stilbene-2,2′-disulfonic acid, disodium salt (IASD), to modify these Cys residues, one face of transmembrane domain 1 (TMD1) and TMD3 was judged to face the lumen of the S105 hole. In both cases, the lumen-accessible face was found to correspond to the more hydrophilic face of the two TMDs. Judging by the efficiency of IASD modification, it was concluded that the bulk of the S105 protein molecules were involved in facing the lumen. These results are consistent with a model in which the perimeters of the S105 holes are lined by the holin molecules present at the time of lysis. Moreover, the findings that TMD1 and TMD3 face the lumen, coupled with previous results showing TMD2-TMD2 contacts in the S105 dimer, support a model in which membrane depolarization drives the transition of S105 from homotypic to heterotypic oligomeric interactions.     

Thiol protection in membrane protein purifications: A study with phage holins

The lambda holin, or S105, is a small cytoplasmic membrane protein that controls the timing of host lysis. Using thiol-specific reagents, we determined that the single cysteine residue within S105 was heterogeneously modified during membrane extraction and subsequent immobilized metal ion chromatography. Here we describe the use of a specific and reversible thiol reagent, 2,2′-dithiodipyridine, to generate purified protein with its cysteine residues in the native thiol state. The 2,2′-dithiodipyridine protection protocol was also successfully used for another unrelated holin, S²¹68, and should be generally useful for the purification of membrane proteins.     

Lysis and lysis inhibition in bacteriophage T4: rV mutations reside in the holin t gene.

Upon infecting populations of susceptible host cells, T-even bacteriophages maximize their yield by switching from lysis at about 25 to 35 min at 37 degrees C after infection by a single phage particle to long-delayed lysis (lysis inhibition) under conditions of sequential infection occurring when free phages outnumber host cells. The timing of lysis depends upon gene t and upon one or more rapid-lysis (r) genes whose inactivation prevents lysis inhibition. t encodes a holin that mediates the movement of the T4 endolysin though the inner cell membrane to its target, the cell wall. The rI protein has been proposed to sense superinfection. Of the five reasonably well characterized r genes, only two, rI and rV, are clearly obligatory for lysis inhibition. We show here that rV mutations are alleles of t that probably render the t protein unable to respond to the lysis inhibition signal. The tr alleles cluster in the 5' third of t and produce a strong r phenotype, whereas conditional-lethal t alleles produce the classical t phenotype (inability to lyse) and other t alleles produce additional, still poorly understood phenotypes. tr mutations are dominant to t+, a result that suggests specific ways to probe T4 holin function.