Impact of genotyping strategy on the accuracy of genomic prediction in simulated populations of purebred swine

Single-step genomic BLUP (ssGBLUP) has been widely used in genomic evaluation due to relatively higher prediction accuracy and simplicity of use. The prediction accuracy from ssGBLUP depends on the amount of information available concerning both genotype and phenotype. This study investigated how information on genotype and phenotype that had been acquired from previous generations influences the prediction accuracy of ssGBLUP, and thus we sought an optimal balance about genotypic and phenotypic information to achieve a cost-effective and computationally efficient genomic evaluation. We generated two genetically correlated traits (h² = 0.35 for trait A, h² = 0.10 for trait B and genetic correlation 0.20) as well as two distinct populations mimicking purebred swine. Phenotypic and genotypic information in different numbers of previous generations and different genotyping rates for each litter were set to generate different datasets. Prediction accuracy was evaluated by correlating genomic estimated breeding values with true breeding values for genotyped animals in the last generation. The results revealed a negligible impact of previous generations that lacked genotyped animals on the prediction accuracy. Phenotypic and genotypic data, including the most recent three to four generations with a genotyping rate of 40% or 50% for each litter, could lead to asymptotic maximum prediction accuracy for genotyped animals in the last generation. Single-step genomic best linear unbiased prediction yielded an optimal balance about genotypic and phenotypic information to ensure a cost-effective and computationally efficient genomic evaluation of populations of polytocous animals such as purebred pigs.     

Comparing genomic prediction accuracy from purebred,crossbred and combined purebred and crossbred reference populations in sheep

Background

The accuracy of genomic prediction depends largely on the number of animals with phenotypes and genotypes. In some industries, such as sheep and beef cattle, data are often available from a mixture of breeds, multiple strains within a breed or from crossbred animals. The objective of this study was to compare the accuracy of genomic prediction for several economically important traits in sheep when using data from purebreds, crossbreds or a combination of those in a reference population.

Methods

The reference populations were purebred Merinos, crossbreds of Border Leicester (BL), Poll Dorset (PD) or White Suffolk (WS) with Merinos and combinations of purebred and crossbred animals. Genomic breeding values (GBV) were calculated based on genomic best linear unbiased prediction (GBLUP), using a genomic relationship matrix calculated based on 48 599 Ovine SNP (single nucleotide polymorphisms) genotypes. The accuracy of GBV was assessed in a group of purebred industry sires based on the correlation coefficient between GBV and accurate estimated breeding values based on progeny records.

Results

The accuracy of GBV for Merino sires increased with a larger purebred Merino reference population, but decreased when a large purebred Merino reference population was augmented with records from crossbred animals. The GBV accuracy for BL, PD and WS breeds based on crossbred data was the same or tended to decrease when more purebred Merinos were added to the crossbred reference population. The prediction accuracy for a particular breed was close to zero when the reference population did not contain any haplotypes of the target breed, except for some low accuracies that were obtained when predicting PD from WS and vice versa.

Conclusions

This study demonstrates that crossbred animals can be used for genomic prediction of purebred animals using 50 k SNP marker density and GBLUP, but crossbred data provided lower accuracy than purebred data. Including data from distant breeds in a reference population had a neutral to slightly negative effect on the accuracy of genomic prediction. Accounting for differences in marker allele frequencies between breeds had only a small effect on the accuracy of genomic prediction from crossbred or combined crossbred and purebred reference populations.     

Accuracy of pedigree and genomic predictions of carcass and novel meat quality traits in multi-breed sheep data assessed by cross-validation

Background

Genomic predictions can be applied early in life without impacting selection candidates. This is especially useful for meat quality traits in sheep. Carcass and novel meat quality traits were predicted in a multi-breed sheep population that included Merino, Border Leicester, Polled Dorset and White Suffolk sheep and their crosses.

Methods

Prediction of breeding values by best linear unbiased prediction (BLUP) based on pedigree information was compared to prediction based on genomic BLUP (GBLUP) and a Bayesian prediction method (BayesR). Cross-validation of predictions across sire families was used to evaluate the accuracy of predictions based on the correlation of predicted and observed values and the regression of observed on predicted values was used to evaluate bias of methods. Accuracies and regression coefficients were calculated using either phenotypes or adjusted phenotypes as observed variables.

Results and conclusions

Genomic methods increased the accuracy of predicted breeding values to on average 0.2 across traits (range 0.07 to 0.31), compared to an average accuracy of 0.09 for pedigree-based BLUP. However, for some traits with smaller reference population size, there was no increase in accuracy or it was small. No clear differences in accuracy were observed between GBLUP and BayesR. The regression of phenotypes on breeding values was close to 1 for all methods, indicating little bias, except for GBLUP and adjusted phenotypes (regression = 0.78). Accuracies calculated with adjusted (for fixed effects) phenotypes were less variable than accuracies based on unadjusted phenotypes, indicating that fixed effects influence the latter. Increasing the reference population size increased accuracy, indicating that adding more records will be beneficial. For the Merino, Polled Dorset and White Suffolk breeds, accuracies were greater than for the Border Leicester breed due to the smaller sample size and limited across-breed prediction. BayesR detected only a few large marker effects but one region on chromosome 6 was associated with large effects for several traits. Cross-validation produced very similar variability of accuracy and regression coefficients for BLUP, GBLUP and BayesR, showing that this variability is not a property of genomic methods alone. Our results show that genomic selection for novel difficult-to-measure traits is a feasible strategy to achieve increased genetic gain.     

The importance of information on relatives for the prediction of genomic breeding values and the implications for the makeup of reference data sets in livestock breeding schemes

Background

The theory of genomic selection is based on the prediction of the effects of genetic markers in linkage disequilibrium with quantitative trait loci. However, genomic selection also relies on relationships between individuals to accurately predict genetic value. This study aimed to examine the importance of information on relatives versus that of unrelated or more distantly related individuals on the estimation of genomic breeding values.

Methods

Simulated and real data were used to examine the effects of various degrees of relationship on the accuracy of genomic selection. Genomic Best Linear Unbiased Prediction (gBLUP) was compared to two pedigree based BLUP methods, one with a shallow one generation pedigree and the other with a deep ten generation pedigree. The accuracy of estimated breeding values for different groups of selection candidates that had varying degrees of relationships to a reference data set of 1750 animals was investigated.

Results

The gBLUP method predicted breeding values more accurately than BLUP. The most accurate breeding values were estimated using gBLUP for closely related animals. Similarly, the pedigree based BLUP methods were also accurate for closely related animals, however when the pedigree based BLUP methods were used to predict unrelated animals, the accuracy was close to zero. In contrast, gBLUP breeding values, for animals that had no pedigree relationship with animals in the reference data set, allowed substantial accuracy.

Conclusions

An animal''s relationship to the reference data set is an important factor for the accuracy of genomic predictions. Animals that share a close relationship to the reference data set had the highest accuracy from genomic predictions. However a baseline accuracy that is driven by the reference data set size and the overall population effective population size enables gBLUP to estimate a breeding value for unrelated animals within a population (breed), using information previously ignored by pedigree based BLUP methods.     

Pre-selecting markers based on fixation index scores improved the power of genomic evaluations in a combined Yorkshire pig population

Combining different swine populations in genomic prediction can be an important tool, leading to an increased accuracy of genomic prediction using single nucleotide polymorphism (SNP) chip data compared with within-population genomic. However, the expected higher accuracy of multi-population genomic prediction has not been realized. This may be due to an inconsistent linkage disequilibrium (LD) between SNPs and quantitative trait loci (QTL) across populations, and the weak genetic relationships across populations. In this study, we determined the impact of different genomic relationship matrices, SNP density and pre-selected variants on prediction accuracy using a combined Yorkshire pig population. Our objective was to provide useful strategies for improving the accuracy of genomic prediction within a combined population. Results showed that the accuracy of genomic best linear unbiased prediction (GBLUP) using imputed whole-genome sequencing (WGS) data in the combined population was always higher than that within populations. Furthermore, the use of imputed WGS data always resulted in a higher accuracy of GBLUP than the use of 80K chip data for the combined population. Additionally, the accuracy of GBLUP with a non-linear genomic relationship matrix was markedly increased (0.87% to 15.17% for 80K chip data, and 0.43% to 4.01% for imputed WGS data) compared with that obtained with a linear genomic relationship matrix, except for the prediction of XD population in the combined population using imputed WGS data. More importantly, the application of pre-selected variants based on fixation index (Fst) scores improved the accuracy of multi-population genomic prediction, especially for 80K chip data. For BLUP|GA (BLUP approach given the genetic architecture), the use of a linear method with an appropriate weight to build a weight-relatedness matrix led to a higher prediction accuracy compared with the use of only pre-selected SNPs for genomic evaluations, especially for the total number of piglets born. However, for the non-linear method, BLUP|GA showed only a small increase or even a decrease in prediction accuracy compared with the use of only pre-selected SNPs. Overall, the best genomic evaluation strategy for reproduction-related traits for a combined population was found to be GBLUP performed with a non-linear genomic relationship matrix using variants pre-selected from the 80K chip data based on Fst scores.     

Reduction in accuracy of genomic prediction for ordered categorical data compared to continuous observations

Background

Accuracy of genomic prediction depends on number of records in the training population, heritability, effective population size, genetic architecture, and relatedness of training and validation populations. Many traits have ordered categories including reproductive performance and susceptibility or resistance to disease. Categorical scores are often recorded because they are easier to obtain than continuous observations. Bayesian linear regression has been extended to the threshold model for genomic prediction. The objective of this study was to quantify reductions in accuracy for ordinal categorical traits relative to continuous traits.

Methods

Efficiency of genomic prediction was evaluated for heritabilities of 0.10, 0.25 or 0.50. Phenotypes were simulated for 2250 purebred animals using 50 QTL selected from actual 50k SNP (single nucleotide polymorphism) genotypes giving a proportion of causal to total loci of.0001. A Bayes C π threshold model simultaneously fitted all 50k markers except those that represented QTL. Estimated SNP effects were utilized to predict genomic breeding values in purebred (n = 239) or multibreed (n = 924) validation populations. Correlations between true and predicted genomic merit in validation populations were used to assess predictive ability.

Results

Accuracies of genomic estimated breeding values ranged from 0.12 to 0.66 for purebred and from 0.04 to 0.53 for multibreed validation populations based on Bayes C π linear model analysis of the simulated underlying variable. Accuracies for ordinal categorical scores analyzed by the Bayes C π threshold model were 20% to 50% lower and ranged from 0.04 to 0.55 for purebred and from 0.01 to 0.44 for multibreed validation populations. Analysis of ordinal categorical scores using a linear model resulted in further reductions in accuracy.

Conclusions

Threshold traits result in markedly lower accuracy than a linear model on the underlying variable. To achieve an accuracy equal or greater than for continuous phenotypes with a training population of 1000 animals, a 2.25 fold increase in training population size was required for categorical scores fitted with the threshold model. The threshold model resulted in higher accuracies than the linear model and its advantage was greatest when training populations were smallest.     

Genomic prediction of reproduction traits for Merino sheep

Economically important reproduction traits in sheep, such as number of lambs weaned and litter size, are expressed only in females and later in life after most selection decisions are made, which makes them ideal candidates for genomic selection. Accurate genomic predictions would lead to greater genetic gain for these traits by enabling accurate selection of young rams with high genetic merit. The aim of this study was to design and evaluate the accuracy of a genomic prediction method for female reproduction in sheep using daughter trait deviations (DTD) for sires and ewe phenotypes (when individual ewes were genotyped) for three reproduction traits: number of lambs born (NLB), litter size (LSIZE) and number of lambs weaned. Genomic best linear unbiased prediction (GBLUP), BayesR and pedigree BLUP analyses of the three reproduction traits measured on 5340 sheep (4503 ewes and 837 sires) with real and imputed genotypes for 510 174 SNPs were performed. The prediction of breeding values using both sire and ewe trait records was validated in Merino sheep. Prediction accuracy was evaluated by across sire family and random cross‐validations. Accuracies of genomic estimated breeding values (GEBVs) were assessed as the mean Pearson correlation adjusted by the accuracy of the input phenotypes. The addition of sire DTD into the prediction analysis resulted in higher accuracies compared with using only ewe records in genomic predictions or pedigree BLUP. Using GBLUP, the average accuracy based on the combined records (ewes and sire DTD) was 0.43 across traits, but the accuracies varied by trait and type of cross‐validations. The accuracies of GEBVs from random cross‐validations (range 0.17–0.61) were higher than were those from sire family cross‐validations (range 0.00–0.51). The GEBV accuracies of 0.41–0.54 for NLB and LSIZE based on the combined records were amongst the highest in the study. Although BayesR was not significantly different from GBLUP in prediction accuracy, it identified several candidate genes which are known to be associated with NLB and LSIZE. The approach provides a way to make use of all data available in genomic prediction for traits that have limited recording.     

The Effects of Demography and Long-Term Selection on the Accuracy of Genomic Prediction with Sequence Data

The use of dense SNPs to predict the genetic value of an individual for a complex trait is often referred to as “genomic selection” in livestock and crops, but is also relevant to human genetics to predict, for example, complex genetic disease risk. The accuracy of prediction depends on the strength of linkage disequilibrium (LD) between SNPs and causal mutations. If sequence data were used instead of dense SNPs, accuracy should increase because causal mutations are present, but demographic history and long-term negative selection also influence accuracy. We therefore evaluated genomic prediction, using simulated sequence in two contrasting populations: one reducing from an ancestrally large effective population size (N_e) to a small one, with high LD common in domestic livestock, while the second had a large constant-sized N_e with low LD similar to that in some human or outbred plant populations. There were two scenarios in each population; causal variants were either neutral or under long-term negative selection. For large N_e, sequence data led to a 22% increase in accuracy relative to ∼600K SNP chip data with a Bayesian analysis and a more modest advantage with a BLUP analysis. This advantage increased when causal variants were influenced by negative selection, and accuracy persisted when 10 generations separated reference and validation populations. However, in the reducing N_e population, there was little advantage for sequence even with negative selection. This study demonstrates the joint influence of demography and selection on accuracy of prediction and improves our understanding of how best to exploit sequence for genomic prediction.     

Response to genomic selection: The Bulmer effect and the potential of genomic selection when the number of phenotypic records is limiting

Background

Over the last ten years, genomic selection has developed enormously. Simulations and results on real data suggest that breeding values can be predicted with high accuracy using genetic markers alone. However, to reach high accuracies, large reference populations are needed. In many livestock populations or even species, such populations cannot be established when traits are difficult or expensive to record, or when the population size is small. The value of genomic selection is then questionable.

Methods

In this study, we compare traditional breeding schemes based on own performance or progeny information to genomic selection schemes, for which the number of phenotypic records is limiting. Deterministic simulations were performed using selection index theory. Our focus was on the equilibrium response obtained after a few generations of selection. Therefore, we first investigated the magnitude of the Bulmer effect with genomic selection.

Results

Results showed that the reduction in response due to the Bulmer effect is the same for genomic selection as for selection based on traditional BLUP estimated breeding values, and is independent of the accuracy of selection. The reduction in response with genomic selection is greater than with selection based directly on phenotypes without the use of pedigree information, such as mass selection. To maximize the accuracy of genomic estimated breeding values when the number of phenotypic records is limiting, the same individuals should be phenotyped and genotyped, rather than genotyping parents and phenotyping their progeny. When the generation interval cannot be reduced with genomic selection, large reference populations are required to obtain a similar response to that with selection based on BLUP estimated breeding values based on own performance or progeny information. However, when a genomic selection scheme has a moderate decrease in generation interval, relatively small reference population sizes are needed to obtain a similar response to that with selection on traditional BLUP estimated breeding values.

Conclusions

When the trait of interest cannot be recorded on the selection candidate, genomic selection schemes are very attractive even when the number of phenotypic records is limited, because traditional breeding requires progeny testing schemes with long generation intervals in those cases.     

The effect of high-density genotypic data and different methods on joint genomic prediction: A case study in large white pigs

Joint genomic prediction (GP) is an attractive method to improve the accuracy of GP by combining information from multiple populations. However, many factors can negatively influence the accuracy of joint GP, such as differences in linkage disequilibrium phasing between single nucleotide polymorphisms (SNPs) and causal variants, minor allele frequencies and causal variants’ effect sizes across different populations. The objective of this study was to investigate whether the imputed high-density genotype data can improve the accuracy of joint GP using genomic best linear unbiased prediction (GBLUP), single-step GBLUP (ssGBLUP), multi-trait GBLUP (MT-GBLUP) and GBLUP based on genomic relationship matrix considering heterogenous minor allele frequencies across different populations (wGBLUP). Three traits, including days taken to reach slaughter weight, backfat thickness and loin muscle area, were measured on 67 276 Large White pigs from two different populations, for which 3334 were genotyped by SNP array. The results showed that a combined population could substantially improve the accuracy of GP compared with a single-population GP, especially for the population with a smaller size. The imputed SNP data had no effect for single population GP but helped to yield higher accuracy than the medium-density array data for joint GP. Of the four methods, ssGLBUP performed the best, but the advantage of ssGBLUP decreased as more individuals were genotyped. In some cases, MT-GBLUP and wGBLUP performed better than GBLUP. In conclusion, our results confirmed that joint GP could be beneficial from imputed high-density genotype data, and the wGBLUP and MT-GBLUP methods are promising for joint GP in pig breeding.     

Economic aspects of implementing genomic evaluations in a pig sire line breeding scheme

Background

Replacing pedigree-based BLUP evaluations by genomic evaluations in pig breeding schemes can result in greater selection accuracy and genetic gains, especially for traits with limited phenotypes. However, this methodological change would generate additional costs. The objective of this study was to determine whether additional expenditures would be more profitably devoted to implementing genomic evaluations or to increasing phenotyping capacity while retaining traditional evaluations.

Methods

Stochastic simulation was used to simulate a population with 1050 breeding females and 50 boars that was selected for 10 years for a breeding goal with two uncorrelated traits with heritabilities of 0.4. The reference breeding scheme was based on phenotyping 13 770 candidates per year for trait 1 and 270 sibs of candidates per year for trait 2, with selection based on pedigree-based BLUP estimated breeding values. Increased expenditures were allocated to either increasing the phenotyping capacity for trait 2 while maintaining traditional evaluations, or to implementing genomic selection. The genomic scheme was based on two training populations: one for trait 2, consisting of phenotyped sibs of the candidates whose number increased from 1000 to 3430 over time, and one for trait 1, consisting of the selection candidates. Several genomic scenarios were tested, where the size of the training population for trait 1, and the number of genotyped candidates pre-selected based on their parental estimated breeding value, varied.

Results

Both approaches resulted in higher genetic trends for the population breeding goal and lower rates of inbreeding compared to the reference scheme. However, even a very marked increase in phenotyping capacity for trait 2 could not match improvements achieved with genomic selection when the number of genotyped candidates was large. Genotyping just a limited number of pre-selected candidates significantly reduced the extra costs, while preserving most of the benefits in terms of genetic trends and inbreeding. Implementing genomic evaluations was the most efficient approach when major expenditure was possible, whereas increasing phenotypes was preferable when limited resources were available.

Conclusions

Economic decisions on implementing genomic evaluations in a pig nucleus population must take account of population characteristics, phenotyping and genotyping costs, and available funds.     

Genomic prediction based on data from three layer lines: a comparison between linear methods

Background

The prediction accuracy of several linear genomic prediction models, which have previously been used for within-line genomic prediction, was evaluated for multi-line genomic prediction.

Methods

Compared to a conventional BLUP (best linear unbiased prediction) model using pedigree data, we evaluated the following genomic prediction models: genome-enabled BLUP (GBLUP), ridge regression BLUP (RRBLUP), principal component analysis followed by ridge regression (RRPCA), BayesC and Bayesian stochastic search variable selection. Prediction accuracy was measured as the correlation between predicted breeding values and observed phenotypes divided by the square root of the heritability. The data used concerned laying hens with phenotypes for number of eggs in the first production period and known genotypes. The hens were from two closely-related brown layer lines (B1 and B2), and a third distantly-related white layer line (W1). Lines had 1004 to 1023 training animals and 238 to 240 validation animals. Training datasets consisted of animals of either single lines, or a combination of two or all three lines, and had 30 508 to 45 974 segregating single nucleotide polymorphisms.

Results

Genomic prediction models yielded 0.13 to 0.16 higher accuracies than pedigree-based BLUP. When excluding the line itself from the training dataset, genomic predictions were generally inaccurate. Use of multiple lines marginally improved prediction accuracy for B2 but did not affect or slightly decreased prediction accuracy for B1 and W1. Differences between models were generally small except for RRPCA which gave considerably higher accuracies for B2. Correlations between genomic predictions from different methods were higher than 0.96 for W1 and higher than 0.88 for B1 and B2. The greater differences between methods for B1 and B2 were probably due to the lower accuracy of predictions for B1 (~0.45) and B2 (~0.40) compared to W1 (~0.76).

Conclusions

Multi-line genomic prediction did not affect or slightly improved prediction accuracy for closely-related lines. For distantly-related lines, multi-line genomic prediction yielded similar or slightly lower accuracies than single-line genomic prediction. Bayesian variable selection and GBLUP generally gave similar accuracies. Overall, RRPCA yielded the greatest accuracies for two lines, suggesting that using PCA helps to alleviate the “n ≪ p” problem in genomic prediction.

Electronic supplementary material

The online version of this article (doi:10.1186/s12711-014-0057-5) contains supplementary material, which is available to authorized users.     

Factors Affecting Accuracy From Genomic Selection in Populations Derived From Multiple Inbred Lines: A Barley Case Study

We compared the accuracies of four genomic-selection prediction methods as affected by marker density, level of linkage disequilibrium (LD), quantitative trait locus (QTL) number, sample size, and level of replication in populations generated from multiple inbred lines. Marker data on 42 two-row spring barley inbred lines were used to simulate high and low LD populations from multiple inbred line crosses: the first included many small full-sib families and the second was derived from five generations of random mating. True breeding values (TBV) were simulated on the basis of 20 or 80 additive QTL. Methods used to derive genomic estimated breeding values (GEBV) were random regression best linear unbiased prediction (RR–BLUP), Bayes-B, a Bayesian shrinkage regression method, and BLUP from a mixed model analysis using a relationship matrix calculated from marker data. Using the best methods, accuracies of GEBV were comparable to accuracies from phenotype for predicting TBV without requiring the time and expense of field evaluation. We identified a trade-off between a method's ability to capture marker-QTL LD vs. marker-based relatedness of individuals. The Bayesian shrinkage regression method primarily captured LD, the BLUP methods captured relationships, while Bayes-B captured both. Under most of the study scenarios, mixed-model analysis using a marker-derived relationship matrix (BLUP) was more accurate than methods that directly estimated marker effects, suggesting that relationship information was more valuable than LD information. When markers were in strong LD with large-effect QTL, or when predictions were made on individuals several generations removed from the training data set, however, the ranking of method performance was reversed and BLUP had the lowest accuracy.     

Accuracy and bias of genomic prediction with different de-regression methods

Genomic selection has become increasingly important in the breeding of animals and plants. The response variable is an important factor, influencing the accuracy of genomic selection. The de-regressed proof (DRP) based on traditional estimated breeding value (EBV) is commonly used as response variable. In the current study, simulated data from 16th QTL-MAS Workshop and real data from Chinese Holstein cattle were used to compare accuracy and bias of genomic prediction with two methods of calculating DRP. Our results with simulated data showed that the correlation between genomic EBV and true breeding value achieved using the Jairath method (DRP_J) was superior to that achieved using the Garrick method (DRP_G) for simulated trait 1 but the reverse was true for simulated trait 3, and these two methods performed comparably for simulated trait 2. For all three simulated traits, DRP_J yielded larger bias of genomic prediction. However, DRP_J outperformed DRP_G in both accuracy and unbiasedness for four milk production traits in Chinese Holstein. In the estimation of genomic breeding value using genomic BLUP model, two methods for weighting diagonal elements of incidence matrix associated with residual error were also compared. With increasing the proportion of genetic variance unexplained by markers, the accuracy of genomic prediction was decreased and the bias was increased. Weighting by the reliability of DRP produced accuracy comparable to the evaluation where the proportion of genetic variance unexplained by markers was considered, but with smaller bias in general.     

Invited review: efficient computation strategies in genomic selection

The purpose of this study is review and evaluation of computing methods used in genomic selection for animal breeding. Commonly used models include SNP BLUP with extensions (BayesA, etc), genomic BLUP (GBLUP) and single-step GBLUP (ssGBLUP). These models are applied for genomewide association studies (GWAS), genomic prediction and parameter estimation. Solving methods include finite Cholesky decomposition possibly with a sparse implementation, and iterative Gauss–Seidel (GS) or preconditioned conjugate gradient (PCG), the last two methods possibly with iteration on data. Details are provided that can drastically decrease some computations. For SNP BLUP especially with sampling and large number of SNP, the only choice is GS with iteration on data and adjustment of residuals. If only solutions are required, PCG by iteration on data is a clear choice. A genomic relationship matrix (GRM) has limited dimensionality due to small effective population size, resulting in infinite number of generalized inverses of GRM for large genotyped populations. A specific inverse called APY requires only a small fraction of GRM, is sparse and can be computed and stored at a low cost for millions of animals. With APY inverse and PCG iteration, GBLUP and ssGBLUP can be applied to any population. Both tools can be applied to GWAS. When the system of equations is sparse but contains dense blocks, a recently developed package for sparse Cholesky decomposition and sparse inversion called YAMS has greatly improved performance over packages where such blocks were treated as sparse. With YAMS, GREML and possibly single-step GREML can be applied to populations with >50 000 genotyped animals. From a computational perspective, genomic selection is becoming a mature methodology.     

Genomic prediction in CIMMYT maize and wheat breeding programs

Genomic selection (GS) has been implemented in animal and plant species, and is regarded as a useful tool for accelerating genetic gains. Varying levels of genomic prediction accuracy have been obtained in plants, depending on the prediction problem assessed and on several other factors, such as trait heritability, the relationship between the individuals to be predicted and those used to train the models for prediction, number of markers, sample size and genotype × environment interaction (GE). The main objective of this article is to describe the results of genomic prediction in International Maize and Wheat Improvement Center''s (CIMMYT''s) maize and wheat breeding programs, from the initial assessment of the predictive ability of different models using pedigree and marker information to the present, when methods for implementing GS in practical global maize and wheat breeding programs are being studied and investigated. Results show that pedigree (population structure) accounts for a sizeable proportion of the prediction accuracy when a global population is the prediction problem to be assessed. However, when the prediction uses unrelated populations to train the prediction equations, prediction accuracy becomes negligible. When genomic prediction includes modeling GE, an increase in prediction accuracy can be achieved by borrowing information from correlated environments. Several questions on how to incorporate GS into CIMMYT''s maize and wheat programs remain unanswered and subject to further investigation, for example, prediction within and between related bi-parental crosses. Further research on the quantification of breeding value components for GS in plant breeding populations is required.     

Accounting for genomic pre-selection in national BLUP evaluations in dairy cattle

Background

In future Best Linear Unbiased Prediction (BLUP) evaluations of dairy cattle, genomic selection of young sires will cause evaluation biases and loss of accuracy once the selected ones get progeny.

Methods

To avoid such bias in the estimation of breeding values, we propose to include information on all genotyped bulls, including the culled ones, in BLUP evaluations. Estimated breeding values based on genomic information were converted into genomic pseudo-performances and then analyzed simultaneously with actual performances. Using simulations based on actual data from the French Holstein population, bias and accuracy of BLUP evaluations were computed for young sires undergoing progeny testing or genomic pre-selection. For bulls pre-selected based on their genomic profile, three different types of information can be included in the BLUP evaluations: (1) data from pre-selected genotyped candidate bulls with actual performances on their daughters, (2) data from bulls with both actual and genomic pseudo-performances, or (3) data from all the genotyped candidates with genomic pseudo-performances. The effects of different levels of heritability, genomic pre-selection intensity and accuracy of genomic evaluation were considered.

Results

Including information from all the genotyped candidates, i.e. genomic pseudo-performances for both selected and culled candidates, removed bias from genetic evaluation and increased accuracy. This approach was effective regardless of the magnitude of the initial bias and as long as the accuracy of the genomic evaluations was sufficiently high.

Conclusions

The proposed method can be easily and quickly implemented in BLUP evaluations at the national level, although some improvement is necessary to more accurately propagate genomic information from genotyped to non-genotyped animals. In addition, it is a convenient method to combine direct genomic, phenotypic and pedigree-based information in a multiple-step procedure.     

Genomic Selection for the Improvement of Antibody Response to Newcastle Disease and Avian Influenza Virus in Chickens

Newcastle disease (ND) and avian influenza (AI) are the most feared diseases in the poultry industry worldwide. They can cause flock mortality up to 100%, resulting in a catastrophic economic loss. This is the first study to investigate the feasibility of genomic selection for antibody response to Newcastle disease virus (Ab-NDV) and antibody response to Avian Influenza virus (Ab-AIV) in chickens. The data were collected from a crossbred population. Breeding values for Ab-NDV and Ab-AIV were estimated using a pedigree-based best linear unbiased prediction model (BLUP) and a genomic best linear unbiased prediction model (GBLUP). Single-trait and multiple-trait analyses were implemented. According to the analysis using the pedigree-based model, the heritability for Ab-NDV estimated from the single-trait and multiple-trait models was 0.478 and 0.487, respectively. The heritability for Ab-AIV estimated from the two models was 0.301 and 0.291, respectively. The estimated genetic correlation between the two traits was 0.438. A four-fold cross-validation was used to assess the accuracy of the estimated breeding values (EBV) in the two validation scenarios. In the family sample scenario each half-sib family is randomly allocated to one of four subsets and in the random sample scenario the individuals are randomly divided into four subsets. In the family sample scenario, compared with the pedigree-based model, the accuracy of the genomic prediction increased from 0.086 to 0.237 for Ab-NDV and from 0.080 to 0.347 for Ab-AIV. In the random sample scenario, the accuracy was improved from 0.389 to 0.427 for Ab-NDV and from 0.281 to 0.367 for Ab-AIV. The multiple-trait GBLUP model led to a slightly higher accuracy of genomic prediction for both traits. These results indicate that genomic selection for antibody response to ND and AI in chickens is promising.     

基因组选择在猪杂交育种中的应用

基因组选择是指在全基因组范围内通过基因组中大量的标记信息估计出个体全基因组范围的育种值,可进一步提升育种效率和准确性,目前在猪纯繁育种中得到广泛应用。但有研究表明,现有的基因组选择方法在猪杂交育种上的应用效果并不理想,在跨群体条件下预测准确性极低。杂交作为养猪业中最为广泛的育种手段之一,通过结合基因组选择理论进一步提升猪的生产性能,具有重要的经济和研究价值。本文综述了基因组选择的发展及其在猪育种中的应用现状,并结合国内外猪杂交育种的方式,分析了目前基因组选择方法在猪杂交育种应用方面的不足,旨在为未来基因组选择在猪杂交育种中的合理应用提供参考。     

Accuracy of predicting genomic breeding values for carcass merit traits in Angus and Charolais beef cattle

Accuracy of predicting genomic breeding values for carcass merit traits including hot carcass weight, longissimus muscle area (REA), carcass average backfat thickness (AFAT), lean meat yield (LMY) and carcass marbling score (CMAR) was evaluated based on 543 Angus and 400 Charolais steers genotyped on the Illumina BovineSNP50 Beadchip. For the genomic prediction within Angus, the average accuracy was 0.35 with a range from 0.32 (LMY) to 0.37 (CMAR) across different training/validation data‐splitting strategies and statistical methods. The within‐breed genomic prediction for Charolais yielded an average accuracy of 0.36 with a range from 0.24 (REA) to 0.46 (AFAT). The across‐breed prediction had the lowest accuracy, which was on average near zero. When the data from the two breeds were combined to predict the breeding values of either breed, the prediction accuracy averaged 0.35 for Angus with a range from 0.33 (REA) to 0.39 (CMAR) and averaged 0.33 for Charolais with a range from 0.18 (REA) to 0.46 (AFAT). The prediction accuracy was slightly higher on average when the data were split by animal's birth year than when the data were split by sire family. These results demonstrate that the genetic relationship or relatedness of selection candidates with the training population has a great impact on the accuracy of predicting genomic breeding values under the density of the marker panel used in this study.