Isolation and characterization of enantioselective DNA aptamers for ibuprofen

Single stranded DNA aptamers that can bind to ibuprofen, a widely used anti-inflammation drug, were selected from random DNA library of 10¹⁵ nucleotides by FluMag-SELEX process. Five different sequences were selected and their enantioselectivity and affinity were characterized. Three out of five aptamer candidates did not show any affinity to (S)-ibuprofen, but only to racemic form of ibuprofen, suggesting that they are (R)-ibuprofen specific aptamers. Another two aptamer candidates showed affinity to both racemic form and (S)-ibuprofen, which were considered as (S)-ibuprofen specific aptamers. The affinity of five ssDNA aptamers isolated was in a range of 1.5–5.2 μM. In addition, all of these five aptamers did not show any affinity to analogues of ibuprofen in its profen’s group (fenoprofen, flubiprofen, and naproxen) and the antibiotics of oxytetracycline, another control.     

In vitro selection of a DNA aptamer targeted against Shigella dysenteriae

To identify DNA aptamers demonstrating binding specificity for Shigella dysenteriae, a whole-bacterium Systemic Evolution of Ligands by Exponential enrichment (SELEX) method was applied to a combinatorial library of single-stranded DNA (ssDNA) molecules. After several rounds of selection using S. dysenteriae as the target, the highly enriched oligonucleotide pool was sequenced and then grouped into different families based on primary sequence homologies and similarities in the secondary structures. Aptamer S 1, which showed particularly high binding affinity in preliminary studies, was chosen for further characterisation. This aptamer displayed a dissociation constant (K_d value) of 23.47 ± 2.48 nM. Binding assays to assess the specificity of aptamer S 1 showed high binding affinity for S. dysenteriae and low apparent binding affinity for other bacteria. The ssDNA aptamers generated may serve as a new type of molecular probe for microbial pathogens, as it has the potential to overcome the tedious isolation and purification requirements for complex targets.     

Evolutionary dynamics and population control during in vitro selection and amplification with multiple targets

Iterative cycles of in vitro selection and amplification allow rare functional nucleic acid molecules, aptamers, to be isolated from large sequence pools. Here we present an analysis of the progression of a selection experiment that simultaneously yielded two families of RNA aptamers against two disparate targets: the intended target protein (B52/SRp55) and the partitioning matrix. We tracked the sequence abundance and binding activity to reveal the enrichment of the aptamers through successive generations of selected pools. The two aptamer families showed distinct trajectories of evolution, as did members within a single family. We also developed a method to control the relative abundance of an aptamer family in selected pools. This method, involving specific ribonuclease digestion, can be used to reduce the background selection for aptamers that bind the matrix. Additionally, it can be used to isolate a full spectrum of aptamers in a sequential and exhaustive manner for all the different targets in a mixture.     

In vitro selection of RNA aptamer specific to Staphylococcus aureus

Staphylococcus aureus is a major foodborne pathogen. Gram-positive bacteria have unique teichoic acids as cell-wall components. In order to identify ligands specific to the bacteria, we developed an RNA aptamer against the teichoic acid of Staphylococcus aureus using SELEX technology. To this end, we used a polystyrene 96-well-based selection method and confirmed the binding activity of the RNA aptamer to the teichoic acid using real-time PCR. Of note, the teichoic acid-specific RNA aptamer was observed to bind to S. aureus bacterial cells also. This RNA aptamer could therefore be useful as a diagnostic ligand against S. aureus-associated foodborne illness.     

Recognition of Bungarus multicinctus Venom by a DNA Aptamer against β-Bungarotoxin

Antibody-based technology is the main method for diagnosis and treatment of snake bite envenoming currently. However, the development of an antibody, polyclonal or monoclonal, is a complicated and costly procedure. Aptamers are single stranded oligonucleotides that recognize specific targets such as proteins and have shown great potential over the years as diagnostic and therapeutic agents. In contrast to antibodies, aptamers can be selected in vitro without immunization of animals, and synthesized chemically with extreme accuracy, low cost and high degree of purity. In this study we firstly report on the identification of DNA aptamers that bind to β-bungarotoxin (β-BuTx), a neurotoxin from the venom of Bungarus multicinctus. A plate-SELEX method was used for the selection of β-BuTx specific aptamers. After 10 rounds of selection, four aptamer candidates were obtained, with the dissociation constant ranged from 65.9 nM to 995 nM measured by fluorescence spectroscopy. Competitive binding assays using both the fluorescently labeled and unlabeled aptamers revealed that the four aptamers bound to the same binding site of β-BuTx. The best binder, βB-1, bound specifically to β-BuTx, but not to BSA, casein or α-Bungarotoxin. Moreover, electrophoretic mobility shift assay and enzyme-linked aptamer assay demonstrated that βB-1 could discriminate B. multicinctus venom from other snake venoms tested. The results suggest that aptamer βB-1 can serve as a useful tool for the design and development of drugs and diagnostic tests for β-BuTx poisoning and B. multicinctus bites.     

Isolation of a new ssDNA aptamer against staphylococcal enterotoxin B based on CNBr‐activated sepharose‐4B affinity chromatography

Staphylococcus aureus are potent human pathogens possessing arsenal of virulence factors. Staphylococcal food poisoning (SFP) and respiratory infections mediated by staphylococcal enterotoxin B (SEB) are common clinical manifestations. Many diagnostic techniques are based on serological detection and quantification of SEB in different food and clinical samples. Aptamers are known as new therapeutic and detection tools which are available in different ssDNA, dsDNA and protein structures. In this study, we used a new set of ssDNA aptamers against SEB. The methods used included preparation of a dsDNA library using standard SEB protein as the target analyte, affinity chromatography matrix in microfuge tubes, SELEX procedures to isolate specific ssDNA‐aptamer as an affinity ligand, aptamer purification using ethanol precipitation method, affinity binding assay using ELISA, aptamer cloning and specificity test. Among 12 readable sequences, three of them were selected as the most appropriate aptamer because of their affinity and specificity to SEB. This study presents a new set of ssDNA aptamer with favorable selectivity to SEB through 12 rounds of SELEX. Selected aptamers were used to detect SEB in infected serum samples. Results showed that SEB c1 aptamer (2 µg SEB/100 nM aptamer) had favorable specificity to SEB (k_d = 2.3 × 10^?11). In conclusion, aptamers can be considered as useful tools for detecting and evaluating SEB. The results showed that affinity chromatography was an affordable assay with acceptable accuracy to isolate sensitive and selective novel aptamers. Copyright © 2016 John Wiley & Sons, Ltd.     

Selection and characterization of DNA aptamers specific for Listeria species

Single-stranded (ss) DNA aptamers with binding affinity to Listeria spp. were selected using a whole-cell SELEX (Systematic Evolution of Ligands by EXponential enrichment) method. Listeria monocytogenes cells were grown at 37 °C and harvested at mid-log phase or early stationary phase to serve as the targets in SELEX. A total of 10 unique aptamer sequences were identified, six associated with log phase cells and four with stationary phase cells. Binding affinity of the aptamers was determined using flow cytometry and ranged from 10% to 44%. Four candidates having high binding affinity were further studied and found to show genus-specific binding affinity when screened against five different species within the Listeria genus. Using sequential binding assays combined with flow cytometry, it was determined that three of the aptamers (LM6-2, LM12-6, and LM12-13) bound to one apparent cell surface moiety, while a fourth aptamer (LM6-116) appeared to bind to a different cell surface region. This is the first study in which SELEX targeted bacterial cells at different growth phases. When used together, aptamers that bind to different cell surface moieties could increase the analytical sensitivity of future capture and detection assays.     

Isolation of an Aptamer that Binds Specifically to E. coli

Escherichia coli is a bacterial species found ubiquitously in the intestinal flora of animals, although pathogenic variants cause major public health problems. Aptamers are short oligonucleotides that bind to targets with high affinity and specificity, and have great potential for use in diagnostics and therapy. We used cell-based Systematic Evolution of Ligands by EXponential enrichment (cell-SELEX) to isolate four single stranded DNA (ssDNA) aptamers that bind strongly to E. coli cells (ATCC generic strain 25922), with Kd values in the nanomolar range. Fluorescently labeled aptamers label the surface of E. coli cells, as viewed by fluorescent microscopy. Specificity tests with twelve different bacterial species showed that one of the aptamers–called P12-31—is highly specific for E. coli. Importantly, this aptamer binds to Meningitis/sepsis associated E. coli (MNEC) clinical isolates, and is the first aptamer described with potential for use in the diagnosis of MNEC-borne pathologies.     

Characterisation of aptamer–target interactions by branched selection and high-throughput sequencing of SELEX pools

Nucleic acid aptamer selection by systematic evolution of ligands by exponential enrichment (SELEX) has shown great promise for use in the development of research tools, therapeutics and diagnostics. Typically, aptamers are identified from libraries containing up to 10¹⁶ different RNA or DNA sequences by 5–10 rounds of affinity selection towards a target of interest. Such library screenings can result in complex pools of many target-binding aptamers. New high-throughput sequencing techniques may potentially revolutionise aptamer selection by allowing quantitative assessment of the dynamic changes in the pool composition during the SELEX process and by facilitating large-scale post-SELEX characterisation. In the present study, we demonstrate how high-throughput sequencing of SELEX pools, before and after a single round of branched selection for binding to different target variants, can provide detailed information about aptamer binding sites, preferences for specific target conformations, and functional effects of the aptamers. The procedure was applied on a diverse pool of 2′-fluoropyrimidine-modified RNA enriched for aptamers specific for the serpin plasminogen activator inhibitor-1 (PAI-1) through five rounds of standard selection. The results demonstrate that it is possible to perform large-scale detailed characterisation of aptamer sequences directly in the complex pools obtained from library selection methods, thus without the need to produce individual aptamers.     

Aptamer Selection Express: A Novel Method for Rapid Single-Step Selection and Sensing of Aptamers

Here we describe a new DNA capture element (DCE) sensing system, based on the quenching and dequenching of a double-stranded aptamer. This system shows very good sensitivity and thermal stability. While quenching, dequenching, and separating the DCE systems made from different aptamers (all selected by SELEX), an alternative method to rapidly select aptamers was developed—the Aptamer Selection Express (ASExp). This process has been used to select aptamers against different types of targets (Bacillus anthracis spores, Bacillus thuringiensis spores, MS-2 bacteriophage, ovalbumin, and botulinum neurotoxin). The DCE systems made from botulinum neurotoxin aptamers selected by ASExp have been investigated. The results of this investigation indicate that ASExp can be used to rapidly select aptamers for the DCE sensing system.     

Selection of aptamers against inactive Vibrio alginolyticus and application in a qualitative detection assay

Aptamers against inactive Vibrio alginolyticus were selected from an 82-nt ssDNA random library by systematic evolution of ligands by exponential enrichment. After 15 rounds of selection, the final pool of aptamers was highly specific for inactivated V. alginolyticus and had a dissociation constant of 27.5 ± 9.2 nM. Using these aptamers and PCR, V. alginolyticus could be detected at 100 cells/ml. Sequencing of the final pool of aptamers revealed that some sequences, termed high-frequency aptamers, appeared more than once; these may be of practical application. All sequences obtained were divided into nine families according to their homology tree, some conserved sequences were also found in each of the six families. One sequence was found in significant proportions of the aptamers, suggesting that this conserved sequence might be important for forming the three-dimensional aptamer structure.     

Selection of DNA aptamers for capture and detection of Salmonella Typhimurium using a whole-cell SELEX approach in conjunction with cell sorting

Alternative ligands such as nucleic acid aptamers can be used for pathogen capture and detection and offer advantages over antibodies, including reduced cost, ease of production and modification, and improved stability. DNA aptamers demonstrating binding specificity to Salmonella enterica serovar Typhimurium were identified by whole-cell-systematic evolution of ligands by exponential enrichment (SELEX) beginning with a combinatorial library of biotin-labeled single stranded DNA molecules. Aptamer specificity was achieved using whole-cell counter-SELEX against select non-Salmonella genera. Aptamers binding to Salmonella were sorted, cloned, sequenced, and characterized for binding efficiency. Out of 18 candidate aptamers screened, aptamer S8-7 showed relatively high binding affinity with an apparent dissociation constant (K _d value) of 1.73?±?0.54 μM and was selected for further characterization. Binding exclusivity analysis of S8-7 showed low apparent cross-reactivity with other foodborne bacteria including Escherichia coli O157: H7 and Citrobacter braakii and moderate cross-reactivity with Bacillus cereus. Aptamer S8-7 was successfully used as a ligand for magnetic capture of serially diluted Salmonella Typhimurium cells, followed by downstream detection using qPCR. The lower limit of detection of the aptamer magnetic capture-qPCR assay was 10²–10³?CFU equivalents of Salmonella Typhimurium in a 290-μl sample volume. Mean capture efficiency ranged from 3.6 to 12.6 %. Unique aspects of the study included (a) the use of SELEX targeting whole cells; (b) the application of flow cytometry for aptamer pool selection, thereby favoring purification of ligands with both high binding affinity and targeting abundant cell surface moieties; and (c) the use of pre-labeled primers that circumvented the need for post-selection ligand labeling. Taken together, this study provides proof-of-concept that biotinylated aptamers selected by whole-cell SELEX can be used in a qPCR-based capture-detection platform for Salmonella Typhimurium.     

Quantification of receptor targeting aptamer binding characteristics using single-molecule spectroscopy

This experimental design presents a single molecule approach based on fluorescence correlation spectroscopy (FCS) for the quantification of outer membrane proteins which are receptors to an aptamer specifically designed to target the surface receptors of live Salmonella typhimurium. By using correlation analysis, we also show that it is possible to determine the associated binding kinetics of these aptamers on live single cells. Aptamers are specific oligonucleotides designed to recognize conserved sequences that bind to receptors with high affinity, and therefore can be integrated into selective biosensor platforms. In our experiments, aptamers were constructed to bind to outer membrane proteins of S. typhimurium and were assessed for specificity against Escherichia coli. By fluorescently labeling aptamer probes and applying FCS, we were able to study the diffusion dynamics of bound and unbound aptamers and compare them to determine the dissociation constants and receptor densities of the bacteria for each aptamer at single molecule sensitivity. The dissociation constants for these aptamer probes calculated from autocorrelation data were 0.1285 and 0.3772 nM and the respective receptor densities were 42.27 receptors per µm² and 49.82 receptors per µm². This study provides ample evidence that the number of surface receptors is sufficient for binding and that both aptamers have a high‐binding affinity and can therefore be used in detection processes. The methods developed here are unique and can be generalized to examine surface binding kinetics and receptor quantification in live bacteria at single molecule sensitivity levels. The impact of this study is broad because our approach can provide a methodology for biosensor construction and calculation of live single cell receptor‐ligand kinetics in a variety of environmental and biological applications. Bioeng. 2011; 108:1222–1227. © 2010 Wiley Periodicals, Inc.     

Identification of potential targets in Staphylococcus aureus N315 using computer aided protein data analysis

Staphylococcus aureus is a gram positive bacterium, responsible for both community-acquired and hospital-acquired infection, resulting in a mortality rate of 39%. 43.2% resistance to methicilin and emerging resistance to Fluroquinolone and Oxazolidinone, have evoked the necessity of the establishment of alternative and effective therapeutic approach to treat this bacteria. In this computational study, various database and online software are used to determine some specific targets of Staphylococcus aureus N315 other than those used by Penicillin, Quinolone and Oxazolidinone. For this purpose, among 302 essential proteins, 101 nonhomologous proteins were accrued and 64 proteins which are unique in several metabolic pathways of S. aureus were isolated by using metabolic pathway analysis tools. Furthermore, 7 essentially unique enzymes involved in exclusive metabolic pathways were revealed by this research, which can be potential drug target. Along with these important enzymes, 15 non-homologous proteins located on membrane were identified, which can play a vital role as potential therapeutic targets for the future researchers.     

Trends in the Design and Development of Specific Aptamers Against Peptides and Proteins

Aptamers are single stranded oligonucleotides, comparable to monoclonal antibodies (mAbs) in selectivity and affinity and have significant strategic properties in design, development and applications more than mAbs. Ease of design and development, simple chemical modification and the attachment of functional groups, easily handling and more adaptability with analytical methods, small size and adaptation with nanostructures are the valuable characteristics of aptamers in comparison to large protein based ligands. Among a broad range of targets that their specific aptamers developed, proteins and peptides have significant position according to the number of related studies performed so far. Since proteins control many of important physiological and pathological incidents in the living organisms, particularly human beings and because of the benefits of aptamers in clinical and analytical applications, aptamer related technologies in the field of proteins and peptides are under progress, exclusively. Currently, there is only one FDA approved therapeutic aptamer in the pharmaceutical market, which is specific to vascular endothelial growth factor and is prescribed for age related macular degenerative disease. Additionally, there are several aptamers in the different phases of clinical trials. Almost all of these aptamers are specific to clinically important peptide or protein targets. In addition, the application of protein specific aptamers in the design and development of targeted drug delivery systems and diagnostic biosensors is another intersting field of aptamer technology. In this review, significant efforts related to development and applications of aptamer technologies in proteins and peptides sciences were considered to emphasis on the importance of aptamers in medicinal and clinical applications.     

Deconvolution of a complex target using DNA aptamers

In vitro selection of single-stranded nucleic acid aptamers from large random sequence libraries is now a straightforward process particularly when screening with a single target molecule. These libraries contain considerable shape diversity as evident by the successful isolation of aptamers that bind with high affinity and specificity to chemically diverse targets. We propose that aptamer libraries contain sufficient shape diversity to allow deconvolution of a complex mixture of targets. Using unfractionated human plasma as our experimental model, we aim to develop methods to obtain aptamers against as many proteins as possible. To begin, it is critical that we understand how aptamer populations change with increasing rounds of in vitro selection when using complex mixtures. Our results show that sequence representation in the selected population changes dramatically with increasing rounds of selection. Certain aptamer families were apparent after only three selection rounds. Two additional cycles saw a decline in the relative abundance of these families and the emergence of yet another family that accounted for more than 60% of sequences in the pool. To overcome this population convergence, an aptamer-based target depletion method was developed, and the library screen was repeated. The previous dominant family effectively disappeared from the selected populations but was replaced by other aptamer families. Insights gained from these initial experiments are now being applied in the creation of second generation plasma protein screens and also to the analysis of other complex biological targets.     

Chimeric aptamers in cancer cell-targeted drug delivery

Aptamers are single-stranded structured oligonucleotides (DNA or RNA) that can bind to a wide range of targets (“apatopes”) with high affinity and specificity. These nucleic acid ligands, generated from pools of random-sequence by an in vitro selection process referred to as systematic evolution of ligands by exponential enrichment (SELEX), have now been identified as excellent tools for chemical biology, therapeutic delivery, diagnosis, research, and monitoring therapy in real-time imaging. Today, aptamers represent an interesting class of modern pharmaceuticals which with their low immunogenic potential mimic extend many of the properties of monoclonal antibodies in diagnostics, research, and therapeutics. More recently, chimeric aptamer approach employing many different possible types of chimerization strategies has generated more stable and efficient chimeric aptamers with aptamer–aptamer, aptamer–nonaptamer biomacromolecules (siRNAs, proteins) and aptamer–nanoparticle chimeras. These chimeric aptamers when conjugated with various biomacromolecules like locked nucleic acid (LNA) to potentiate their stability, biodistribution, and targeting efficiency, have facilitated the accurate targeting in preclinical trials. We developed LNA-aptamer (anti-nucleolin and EpCAM) complexes which were loaded in iron-saturated bovine lactofeerin (Fe-blf)-coated dopamine modified surface of superparamagnetic iron oxide (Fe₃O₄) nanoparticles (SPIONs). This complex was used to deliver the specific aptamers in tumor cells in a co-culture model of normal and cancer cells. This review focuses on the chimeric aptamers, currently in development that are likely to find future practical applications in concert with other therapeutic molecules and modalities.     

DNA-aptamer/protein interaction as a cause of apoptosis and arrest of proliferation in Ehrlich ascites adenocarcinoma cells

New prospects for the applications of single-stranded DNA and RNA as therapeutic agents have been discovered in the recent years. Aptamers are the oligonucleotides that bind to their targets with high affinity and specificity due to the well-defined tertiary structures and spatial charge distribution. Aptamers can be selected for any molecules, virus particles, bacteria, cells, and tissues. They have a wide range of applications from target identification to drug delivery. Aptamers themselves can affect various cell functions by affecting certain proteins and receptors. Here, we present the technique for selecting aptamers with antitumor activity in cancer cell cultures and identifying their target proteins by mass spectrometry analysis. The evolved aptamers showed the following antitumor properties: AS-14 (K _d = 3.8 nM) induced apoptosis (phosphatidylserine translocation determined with Annexin V Alexa Fluor 488) and AS-9 (K _d = 0.75 nM) stopped proliferation (as determined with CellTrace? Far Red DDAO-SE) in the culture of Ehrlich ascites adenocarcinoma cells. Using high performance liquid chromatography and high resolution tandem mass spectrometry, we have identified the proteins affected by the AS-14 and AS-9 aptamers. One of the most likely targets for AS-14 was filamin A, which is involved in metastasis formation, tumor development, and cell proliferation. According to mass spectrometry data, the AS-9 aptamer influences the α-subunit of mitochondrial ATP synthase, the key component of mitochondrial oxidative phosphorylation, stimulation of which leads to tumor growth suppression. Thus, mass spectrometry data confirmed the results of the experiments on cell cultures showing that the aptamer binding to specific protein targets causes apoptosis and stops proliferation of cancer cells. However, the mechanisms of action of aptamers in vitro and in vivo are not clear enough and still need to be determined. Our study opens up new possibilities for creation of non-toxic drugs based on DNA aptamers for targeted anticancer therapy.     

From Ugly Duckling to Swan: Unexpected Identification from Cell-SELEX of an Anti-Annexin A2 Aptamer Targeting Tumors

Background

Cell-SELEX is now widely used for the selection of aptamers against cell surface biomarkers. However, despite negative selection steps using mock cells, this method sometimes results in aptamers against undesirable targets that are expressed both on mock and targeted cells. Studying these junk aptamers might be useful for further applications than those originally envisaged.

Methodology/Principal Findings

Cell-SELEX was performed to identify aptamers against CHO-K1 cells expressing human Endothelin type B receptor (ET_BR). CHO-K1 cells were used for negative selection of aptamers. Several aptamers were identified but no one could discriminate between both cell lines. We decided to study one of these aptamers, named ACE4, and we identified that it binds to the Annexin A2, a protein overexpressed in many cancers. Radioactive binding assays and flow cytometry demonstrated that the aptamer was able to bind several cancer cell lines from different origins, particularly the MCF-7 cells. Fluorescence microscopy revealed it could be completely internalized in cells in 2 hours. Finally, the tumor targeting of the aptamer was evaluated in vivo in nude mice xenograft with MCF-7 cells using fluorescence diffuse optical tomography (fDOT) imaging. Three hours after intravenous injection, the aptamer demonstrated a significantly higher uptake in the tumor compared to a scramble sequence.

Conclusions/Significance

Although aptamers could be selected during cell-SELEX against other targets than those initially intended, they represent a potential source of ligands for basic research, diagnoses and therapy. Here, studying such aptamers, we identify one with high affinity for Annexin A2 that could be a promising tool for biomedical application.