Structure of actin paracrystals induced by nerve growth factor

When nerve growth factor is added to F-actin, well-ordered bundles of filaments are formed. These bundles are observed even at low concentrations of NGF²¹, but when N-bromosuccinimide-treated NGF, a biologically inactive form of the protein is used, a much higher concentration is required to produce aggregation. Moreover, the bundles induced by the modified NGF are not very well ordered and show amorphous aggregates attached at various points.Electron microscopy of paracrystals induced by native NGF shows that, although they resemble pure actin paracrystals induced by Mg²⁺, the interfilament spacing is larger and bridges connect the filaments. Optical diffraction patterns show, in addition to the off-meridional reflections characteristic of the actin helix, meridional reflections on the first and fourth layer-lines, at axial spacings of 37 and 9 nm. Measurements of the axial positions of the layer-lines show that the actin helical symmetry is not significantly different from that in pure actin paracrystals. The presence of the meridional reflections indicates that groups of two or three bridges with spacing 9 nm or nearly 9 nm are arranged along the bundles at a repeating interval of 37 nm.Actin filament bundles have been observed in several non-muscle cells, and specific actin-binding proteins have been identified as responsible for this aggregation. Our in vitro observations show that the biologically active form of NGF interacts with actin and organizes it into well-ordered paracrystalline arrays. The in vitro formation of NGF-actin complexes may be related to the in vivo mechanism of action of this growth factor.     

A polymorphism peculiar to bipolar actin bundles.

Both muscle and nonmuscle actins produced magnesium paracrystals which we found indistinguishable from one another. Contrary to some previous reports, calcium ions caused no change in filament organization for either type of actin. The most ordered paracrystals consisted of hexagonally packed filaments with opposite polarities. We suggest that this mode of packing permits a form of disorder not previously described, which may account for some puzzling aspects of earlier observations and may prove useful in analyzing actin bundles formed, for example, with erythrocyte band 4.9 protein.     

Comparative electron microscopic study on projectin and titin binding to F-actin

Using the system of F-actin paracrystals, we have obtained electron microscopic evidence that projectin from synchronous flight muscles of Locusta migratoria binds to actin filaments in the same fashion as skeletal titin. Control actin paracrystals formed in the presence of Mg(2+) ions have great width and length and blunted ends. The addition of either projectin or titin results in disruption of compact ordered packing of F-actin in paracrystals and leads to the formation of loose filament bundles with smaller diameters and tapered ends. It is also accompanied with the appearance of individual actin filaments in considerable amounts. The effect becomes more pronounced with the increase in concentrations of added projectin or titin. Possible physiological implications of projectin-actin interactions are discussed.     

Supercontracted state of vertebrate smooth muscle cell fragments reveals myofilament lengths

Isolated cell preparations from chicken gizzard smooth muscle typically contain a mixture of cell fragments and whole cells. Both species are spontaneously permeable and may be preloaded with externally applied phalloidin and antibodies and then induced to contract with Mg ATP. Labeling with antibodies revealed that the cell fragments specifically lacked certain cytoskeletal proteins (vinculin, filamin) and were depleted to various degrees in others (desmin, alpha-actinin). The cell fragments showed a unique mode of supercontraction that involved the protrusion of actin filaments through the cell surface during the terminal phase of shortening. In the presence of dextran, to minimize protein loss, the supercontracted products were star-like in form, comprising long actin bundles radiating in all directions from a central core containing myosin, desmin, and alpha-actinin. It is concluded that supercontraction is facilitated by an effective uncoupling of the contractile apparatus from the cytoskeleton, due to partial degradation of the latter, which allows unhindered sliding of actin over myosin. Homogenization of the cell fragments before or after supercontraction produced linear bipolar dimer structures composed of two oppositely polarized bundles of actin flanking a central bundle of myosin filaments. Actin filaments were shown to extend the whole length of the bundles and their length averaged integral to 4.5 microns. Myosin filaments in the supercontracted dimers averaged 1.6 microns in length. The results, showing for the first time the high actin to myosin filament length ratio in smooth muscle are readily consistent with the slow speed of shortening of this tissue. Other implications of the results are also discussed.     

Actin filament-membrane attachment: are membrane particles involved?

The association of actin filaments with membranes is an important feature in the motility of nonmuscle cells. We investigated the role of membrane particles in the attachment of actin filaments to membranes in those systems in which the attachment site can be identified. Freeze fractures through the end-on attachment site of the acrosomal filament bundles in Mytilus (mussel) and Limulus (horseshoe crab) sperm and the attachment site of the microvillar filament bundles in the brush border of intestinal epithelial cells were examined. There are no particles on the P face of the membrane at these sites in the sperm systems and generally none at these sites in microvilli. In microvilli, the actin filaments are also attached along their lengths to the membrane by bridges. When the isolated brush border is incubated in high concentrations of Mg++ (15 mM), the actin filaments form paracrystals and, as a result, the bridges are in register (330 A period). Under these conditions, alignment of the particles on the P face of the membrane into circumferential bands also occurs. However, these bands are generally separated by 800-900 A, indicating that all the bridges cannot be directly attached to membrane particles. Thus membrane particles are not directly involved in the attachment of actin filaments to membranes.     

α-Actinin: Immunofluorescent localization of a muscle structural protein in nonmuscle cells

Antibodies specific for the skeletal muscle structural protein α-actinin are used to localize this protein by indirect immunofluorescence in nonmuscle cells. In cultured nonmuscle cells, α-actinin is localized along or between actin filament bundles producing an almost regular periodicity. The protein is also detected in the form of fluorescent plaques at some ends of actin filament bundles, as well as in a filamentous form in some overlap areas of cells. In spreading rat embryo cells, α-actinin assumes a focal distribution which corresponds to the vertices of a highly regular actin filament network. The results suggest that α-actinin may be involved in the organization of actin filament bundles, in the attachment of actin filaments to the plasma membrane, and in the assembly of actin filaments in areas of cell to cell contact.     

Contribution of the LIM Domain and Nebulin-Repeats to the Interaction of Lasp-2 with Actin Filaments and Focal Adhesions

Lasp-2 binds to actin filaments and concentrates in the actin bundles of filopodia and lamellipodia in neural cells and focal adhesions in fibroblastic cells. Lasp-2 has three structural regions: a LIM domain, a nebulin-repeat region, and an SH3 domain; however, the region(s) responsible for its interactions with actin filaments and focal adhesions are still unclear. In this study, we revealed that the N-terminal fragment from the LIM domain to the first nebulin-repeat module (LIM-n1) retained actin-binding activity and showed a similar subcellular localization to full-length lasp-2 in neural cells. The LIM domain fragment did not interact with actin filaments or localize to actin filament bundles. In contrast, LIM-n1 showed a clear subcellular localization to filopodial actin bundles. Although truncation of the LIM domain caused the loss of F-actin binding activity and the accumulation of filopodial actin bundles, these truncated fragments localized to focal adhesions. These results suggest that lasp-2 interactions with actin filaments are mediated through the cooperation of the LIM domain and the first nebulin-repeat module in vitro and in vivo. Actin filament binding activity may be a major contributor to the subcellular localization of lasp-2 to filopodia but is not crucial for lasp-2 recruitment to focal adhesions.     

Drosophila singed, a fascin homolog, is required for actin bundle formation during oogenesis and bristle extension

Drosophila singed mutants were named for their gnarled bristle phenotype but severe alleles are also female sterile. Recently, singed protein was shown to have 35% peptide identity with echinoderm fascin. Fascin is found in actin filament bundles in microvilli of sea urchin eggs and in filopodial extensions in coelomocytes. We show that Drosophila singed is required for actin filament bundle formation in the cytoplasm of nurse cells during oogenesis; in severe mutants, the absence of cytoplasmic actin filament bundles allows nurse cell nuclei to lodge in ring canals and block nurse cell cytoplasm transport. Singed is also required for organized actin filament bundle formation in the cellular extension that forms a bristle; in severe mutants, the small disorganized actin filament bundles lack structural integrity and allow bristles to bend and branch during extension. Singed protein is also expressed in migratory cells of the developing egg chamber and in the socket cell of the developing bristle, but no defect is observed in these cells in singed mutants. Purified, bacterially expressed singed protein bundles actin filaments in vitro with the same stoichiometry reported for purified sea urchin fascin. Singed-saturated actin bundles have a molar ratio of singed/actin of approximately 1:4.3 and a transverse cross-banding pattern of 12 nm seen using electron microscopy. Our results suggest that singed protein is required for actin filament bundle formation and is a Drosophila homolog of echinoderm fascin.     

High-affinity interaction of vinculin with actin filaments in vitro

Immunofluorescence and microinjection experiments have shown that vinculin (molecular weight 130,000) is localized at adhesion plaques of fibroblasts spread on a solid substrate. We found that this protein affects actin filament assembly and interactions in vitro at substoichiometric levels. Vinculin inhibits the rate of actin polymerization under conditions that limit nuclei formation, indicating an effect on the filament elongation step of the reaction. Vinculin also reduces actin filament-filament interaction measured with a low-shear viscometer. Scatchard plot analysis of the binding of ³H-labeled vinculin to actin filaments showed that there is one high-affinity binding site (dissociation constant = 20 nM) for every 1,500–2,000 actin monomers. These results suggest that vinculin interacts with a specific site located at the growing ends of actin filaments in a cytochalasin-like manner, a property consistent with its proposed function as a linkage protein between filaments and the plasma membrane.     

Conformation changes of actin during formation of filaments and paracrystals and upon interaction with DNase I, cytochalasin B, and phalloidin

Spin labels attached to rabbit muscle actin became more immobilized upon conversion of actin from the G state to the F state with 50 mM KCl. Titration of G-actin with MgCl2 produced F-actin-like EPR spectra between 2 and 5 mM-actin filaments by electron microscopy. Higher concentrations of MgCl2 produced bundles of actin and eventually paracrystals, accompanied by further immobilization of spin labels. The effects of MgCl2 and KCl were competitive: addition of MgCl2 to 50 mM could convert F-actin (50 mM KCl) to paracrystalline (P) actin; the reverse titration (0 to 200 mM KCl in the presence of 20 mM MgCl2) was less complete. Addition of DNase I to G- or F-actin gave the expected amorphous electron micrographic pattern, and the actin was not sedimentable at (400,000 x g x h). EPR showed that the actin was in the G conformation. Addition of DNase I to paracrystalline actin gave the F conformation (EPR) but the actin was "G" by electron microscopy. Phalloidin converted G-actin to F-actin, had no effect on F-actin, and converted P-actin to the F state by electron microscopy but maintained the P conformation by EPR. Cytochalasin B produced no effects observable by EPR or centrifugation but "untwisted" paracrystals into nets. Since actin retained its P conformation by EPR in two states which were morphologically not P, we conclude that the P state is a distinct conformation of the actin molecule and that actin filaments aggregate to form bundles (and eventually paracrystals) when actin monomers are able to enter the P conformation.     

Characterization of an F-actin-binding domain in the cytoskeletal protein vinculin

Vinculin, a major structural component of vertebrate cell-cell and cell- matrix adherens junctions, has been found to interact with several other junctional components. In this report, we have identified and characterized a binding site for filamentous actin. These results included studies with gizzard vinculin, its proteolytic head and tail fragments, and recombinant proteins containing various gizzard vinculin sequences fused to the maltose binding protein (MBP) of Escherichia coli. In cosedimentation assays, only the vinculin tail sequence mediated a direct interaction with actin filaments. The binding was saturable, with a dissociation constant value in the micromolar range. Experiments with deletion clones localized the actin-binding domain to a region confined by residues 893-1016 in the 170-residue-long carboxyterminal segment, while the proline-rich hinge connecting the globular head to the rodlike tail was not required for this interaction. In fixed and permeabilized cells (cell models), as well as after microinjection, proteins containing the actin-binding domain specifically decorated stress fibers and the cortical network of fibroblasts and epithelial cells, as well as of brush border type microvilli. These results corroborated the sedimentation experiments. Our data support and extend previous work showing that vinculin binds directly to actin filaments. They are consistent with a model suggesting that in adhesive cells, the NH2-terminal head piece of vinculin directs this molecule to the focal contact sites, while its tail segment causes bundling of the actin filament ends into the characteristic spear tip-shaped structures.     

Structural similarity between actin bundles from characean algal cells and sea urchin oocytes

The structure of actin bundles from internodal cells of Chara australis, an algal plant, was studied by electron microscopy of negatively stained specimens and optical diffraction. Gently prepared bundles revealed paracrystalline structures resembling the Mg²⁺-induced paracrystals of rabbit skeletal muscle actin (Hanson, 1968). In addition, the algal actin bundles sometimes had transverse striations at intervals of about 130 Å, as has been observed in actin bundles from sea urchin eggs (DeRosier et al., 1977; Spudich & Amos, 1979) and sea urchin coelomocytes (De Rosier & Edds, 1980; Otto & Bryan, 1981). This finding suggests that a common mechanism might be working in a variety of cells to organize actin filaments into functional bundles.     

Arthrin: a new actin-like protein in insect flight muscle

There are one or more proteins of 50,000 to 60,000 Mr in the thin filaments of insect flight muscle. A protein of 55,000 Mr has been isolated from insect fibrillar flight muscle and called arthrin. Despite its higher molecular weight, arthrin is in many ways like actin. The amino acid composition of arthrin was similar to that of actin. There were similarities in the peptides produced by digesting the denatured proteins and mild digestion of polymerized proteins cleaved similar-sized fragments from arthrin and actin. Polymerized arthrin activated the Mg2+ ATPase of myosin to the same extent as actin and the ATPase was regulated by rabbit or Lethocerus troponin and tropomyosin. Arthrin did not itself act as troponin-T. Electron microscopy of negatively stained specimens showed that arthrin and actin filaments were similar in structure and that arthrin could be decorated by rabbit subfragment-1 to form normal-looking arrowheads. Arthrin formed paracrystals at an optimum concentration of MgCl2 (25 mM) that was somewhat lower than the optimum for actin paracrystals. Optical diffraction showed that the structure of the paracrystals was similar to those formed from actin. The mass of arthrin and actin filaments relative to phage fd was measured by scanning transmission electron microscopy; the relative mass of arthrin and actin was 1.33, in agreement with molecular weight estimations. Therefore arthrin has the properties of a heavy form of actin. The proportion of actin, arthrin and troponin-T in Lethocerus myofibrils was six moles of actin to one mole of arthrin and one mole of troponin-T. The function of arthrin is not known.     

Action of cytochalasin D on cytoskeletal networks

Extraction of SC-1 cells (African green monkey kidney) with the detergent Triton X-100 in combination with stereo high-voltage electron microscopy of whole mount preparations has been used as an approach to determine the mode of action of cytochalasin D on cells. The cytoskeleton of extracted BSC-1 cells consists of substrate-associated filament bundles (stress fibers) and a highly cross-linked network of four major filament types extending throughout the cell body; 10-nm filaments, actin microfilaments, microtubules, and 2- to 3-nm filaments. Actin filaments and 2- to 3-nm filaments form numerous end- to-side contacts with other cytoskeletal filaments. Cytochalasin D treatment severely disrupts network organization, increases the number of actin filament ends, and leads to the formation of filamentous aggregates or foci composed mainly of actin filaments. Metabolic inhibitors prevent filament redistribution, foci formation, and cell arborization, but not disorganization of the three-dimensional filament network. In cells first extracted and then treated with cytochalasin D, network organization is disrupted, and the number of free filament ends is increased. Supernates of preparations treated in this way contain both short actin filaments and network fragments (i.e., actin filaments in end-to-side contact with other actin filaments). It is proposed that the dramatic effects of cytochalasin D on cells result from both a direct interaction of the drug with the actin filament component of cytoskeletal networks and a secondary cellular response. The former leads to an immediate disruption of the ordered cytoskeletal network that appears to involve breaking of actin filaments, rather than inhibition of actin filament-filament interactions (i.e., disruption of end-to-side contacts). The latter engages network fragments in an energy-dependent (contractile) event that leads to the formation of filament foci.     

Actin filament bundling by fimbrin is important for endocytosis, cytokinesis, and polarization in fission yeast

Through the coordinated action of diverse actin-binding proteins, cells simultaneously assemble actin filaments with distinct architectures and dynamics to drive different processes. Actin filament cross-linking proteins organize filaments into higher order networks, although the requirement of cross-linking activity in cells has largely been assumed rather than directly tested. Fission yeast Schizosaccharomyces pombe assembles actin into three discrete structures: endocytic actin patches, polarizing actin cables, and the cytokinetic contractile ring. The fission yeast filament cross-linker fimbrin Fim1 primarily localizes to Arp2/3 complex-nucleated branched filaments of the actin patch and by a lesser amount to bundles of linear antiparallel filaments in the contractile ring. It is unclear whether Fim1 associates with bundles of parallel filaments in actin cables. We previously discovered that a principal role of Fim1 is to control localization of tropomyosin Cdc8, thereby facilitating cofilin-mediated filament turnover. Therefore, we hypothesized that the bundling ability of Fim1 is dispensable for actin patches but is important for the contractile ring and possibly actin cables. By directly visualizing actin filament assembly using total internal reflection fluorescence microscopy, we determined that Fim1 bundles filaments in both parallel and antiparallel orientations and efficiently bundles Arp2/3 complex-branched filaments in the absence but not the presence of actin capping protein. Examination of cells exclusively expressing a truncated version of Fim1 that can bind but not bundle actin filaments revealed that bundling activity of Fim1 is in fact important for all three actin structures. Therefore, fimbrin Fim1 has diverse roles as both a filament "gatekeeper" and as a filament cross-linker.     

Studies on the organization and localization of actin and myosin in neurons

The organization of actin in mouse neuroblastoma and chicken dorsal root ganglion (DRG) nerve cells was investigated by means of a variety of electron microscope techniques. Microspikes of neuroblastoma cells contained bundles of 7- to 8-nm actin filaments which originated in the interior of the neurite. In the presence of high concentrations of Mg++ ion, filaments in these bundles became highly ordered to form paracrystals. Actin filaments, but not bundles, were observed in growth cones of DRG cells. Actin was localized in the cell body, neurites, and microspikes of both DRG and neuroblastoma nerve cells by fluorescein-labeled S1. Myosin was localized primarily in the neurites of chick DRG nerve cells with fluorescein-labeled anti-brain myosin antibody. This antibody also stained stress fibers in fibroblasts and myoblasts but did not stain muscle myofibrils.     

Myosin II filament assemblies in the active lamella of fibroblasts: their morphogenesis and role in the formation of actin filament bundles

The morphogenesis of myosin II structures in active lamella undergoing net protrusion was analyzed by correlative fluorescence and electron microscopy. In rat embryo fibroblasts (REF 52) microinjected with tetramethylrhodamine-myosin II, nascent myosin spots formed close to the active edge during periods of retraction and then elongated into wavy ribbons of uniform width. The spots and ribbons initially behaved as distinct structural entities but subsequently aligned with each other in a sarcomeric-like pattern. Electron microscopy established that the spots and ribbons consisted of bipolar minifilaments associated with each other at their head-containing ends and arranged in a single row in an "open" zig-zag conformation or as a "closed" parallel stack. Ribbons also contacted each other in a nonsarcomeric, network-like arrangement as described previously (Verkhovsky and Borisy, 1993. J. Cell Biol. 123:637-652). Myosin ribbons were particularly pronounced in REF 52 cells, but small ribbons and networks were found also in a range of other mammalian cells. At the edge of the cell, individual spots and open ribbons were associated with relatively disordered actin filaments. Further from the edge, myosin filament alignment increased in parallel with the development of actin bundles. In actin bundles, the actin cross-linking protein, alpha-actinin, was excluded from sites of myosin localization but concentrated in paired sites flanking each myosin ribbon, suggesting that myosin filament association may initiate a pathway for the formation of actin filament bundles. We propose that zig-zag assemblies of myosin II filaments induce the formation of actin bundles by pulling on an actin filament network and that co-alignment of actin and myosin filaments proceeds via folding of myosin II filament assemblies in an accordion-like fashion.     

Actin filament attachments for sustained motility in vitro are maintained by filament bundling

We reconstructed cellular motility in vitro from individual proteins to investigate how actin filaments are organized at the leading edge. Using total internal reflection fluorescence microscopy of actin filaments, we tested how profilin, Arp2/3, and capping protein (CP) function together to propel thin glass nanofibers or beads coated with N-WASP WCA domains. Thin nanofibers produced wide comet tails that showed more structural variation in actin filament organization than did bead substrates. During sustained motility, physiological concentrations of Mg(2+) generated actin filament bundles that processively attached to the nanofiber. Reduction of total Mg(2+) abolished particle motility and actin attachment to the particle surface without affecting actin polymerization, Arp2/3 nucleation, or filament capping. Analysis of similar motility of microspheres showed that loss of filament bundling did not affect actin shell formation or symmetry breaking but eliminated sustained attachments between the comet tail and the particle surface. Addition of Mg(2+), Lys-Lys(2+), or fascin restored both comet tail attachment and sustained particle motility in low Mg(2+) buffers. TIRF microscopic analysis of filaments captured by WCA-coated beads in the absence of Arp2/3, profilin, and CP showed that filament bundling by polycation or fascin addition increased barbed end capture by WCA domains. We propose a model in which CP directs barbed ends toward the leading edge and polycation-induced filament bundling sustains processive barbed end attachment to the leading edge.     

Actin filament turnover regulated by cross-linking accounts for the size, shape, location, and number of actin bundles in Drosophila bristles

Drosophila bristle cells are shaped during growth by longitudinal bundles of cross-linked actin filaments attached to the plasma membrane. We used confocal and electron microscopy to examine actin bundle structure and found that during bristle elongation, snarls of uncross-linked actin filaments and small internal bundles also form in the shaft cytoplasm only to disappear within 4 min. Thus, formation and later removal of actin filaments are prominent features of growing bristles. These transient snarls and internal bundles can be stabilized by culturing elongating bristles with jasplakinolide, a membrane-permeant inhibitor of actin filament depolymerization, resulting in enormous numbers of internal bundles and uncross-linked filaments. Examination of bundle disassembly in mutant bristles shows that plasma membrane association and cross-bridging adjacent actin filaments together inhibits depolymerization. Thus, highly cross-bridged and membrane-bound actin filaments turn over slowly and persist, whereas poorly cross-linked filaments turnover more rapidly. We argue that the selection of stable bundles relative to poorly cross-bridged filaments can account for the size, shape, number, and location of the longitudinal actin bundles in bristles. As a result, filament turnover plays an important role in regulating cytoskeleton assembly and consequently cell shape.