An assessment of the effects of shell cross-linked nanoparticle size, core composition, and surface PEGylation on in vivo biodistribution

Amphiphilic core-shell nanoparticles have drawn considerable interest in biomedical applications. The precise control over their physicochemical parameters and the ability to attach various ligands within specific domains suggest shell cross-linked (SCK) nanoparticles may be used as multi-/polyvalent scaffolds for drug delivery. In this study, the biodistribution of four SCKs, differing in size, core composition, and surface PEGylation, was evaluated. To facilitate in-vivo tracking of the SCKs, the positron-emitting radionuclide copper-64 was used. By using biodistribution and microPET imaging approaches, we found that small diameter (18 nm) SCKs possessing a polystyrene core showed the most favorable biological behavior in terms of prolonged blood retention and low liver accumulation. The data demonstrated that both core composition, which influenced the SCK flexibility and shape adaptability, and hydrodynamic diameter of the nanoparticle play important roles in the respective biodistributions. Surface modification with poly(ethylene glycol) (PEG) had no noticeable effects on SCK behavior.     

Synthesis and characterization of triblock copolymers of methoxy poly(ethylene glycol) and poly(propylene fumarate)

Amphiphilic block copolymers were synthesized by transesterification of hydrophilic methoxy poly(ethylene glycol) (mPEG) and hydrophobic poly(propylene fumarate) (PPF) and characterized. Four block copolymers were synthesized with a 2:1 mPEG:PPF molar ratio and mPEGs of molecular weights 570, 800, 1960, and 5190 and PPF of molecular weight 1570 as determined by NMR. The copolymers synthesized with mPEG of molecular weights 570 and 800 had 1.9 and 1.8 mPEG blocks per copolymer, respectively, as measured by NMR, representing an ABA-type block copolymer. The number of mPEG blocks of the copolymer decreased with increasing mPEG block length to as low as 1.5 mPEG blocks for copolymer synthesized with mPEG of molecular weight 5190. At a concentration range of 5-25 wt % in phosphate-buffered saline, copolymers synthesized with mPEG molecular weights of 570 and 800 possessed lower critical solution temperatures (LCST) between 40 and 45 degrees C and between 55 and 60 degrees C, respectively. Aqueous solutions of copolymer synthesized with mPEG 570 and 800 also experienced thermoreversible gelation. The sol-gel transition temperature was dependent on the sodium chloride concentration as well as the mPEG block length. The copolymer synthesized from mPEG 570 had a transition temperature between 40 and 20 degrees C with salt concentrations between 1 and 10 wt %, while the sol-gel transition temperatures of the copolymer synthesized from mPEG molecular weight 800 were higher in the range 75-30 degrees C with salt concentrations between 1 and 15 wt %. These novel thermoreversible copolymers are the first biodegradable copolymers with unsaturated double bonds along their macromolecular chain that can undergo both physical and chemical gelation and hold great promise for drug delivery and tissue engineering applications.     

Micellization phenomena of amphiphilic block copolymers based on methoxy poly(ethylene glycol) and either crystalline or amorphous poly(caprolactone-b-lactide)

This study focuses on the aggregation behavior of the biodegradable amphiphilic block copolymers based on methoxy poly(ethylene glycol) (mPEG) as a hydrophilic block and either crystalline poly(caprolactone-b-l-lactide) (P(CL-LLA)) or amorphous poly(caprolactone-b-D,L-lactide) (P(CL-DLLA)) as a hydrophobic block. These block copolymers have a strong tendency to form micelles in aqueous medium, with very low critical micelle concentrations (CMCs). The CMC of P(CL-LLA)-b-mPEG is higher than that of P(CL-DLLA)-b-mPEG when the mPEG block has the same molecular weight. Furthermore, the partition equilibrium coefficient (K(v)) of pyrene in the micellar solution of P(CL-LLA)-b-mPEG copolymer was lower than that of P(CL-DLLA)-b-mPEG copolymer when the mPEG block was the same length. These differences were believed to be related to the physical state of the core-forming blocks, i.e., the crystalline P(CL-LLA) block and the amorphous P(CL-DLLA) block. The TEM images showed that micelles formed by P(CL-LLA)-b-mPEG assembled in a cylindrical morphology, whereas those formed by P(CL-DLLA)-b-mPEG took a classical spherical shape. In addition, with differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD) analyses, it is believed that the crystallization tendency of the core-forming blocks is the main factor governing the morphology of micelles in water. A possible mechanism for the cylindrical assembly morphology was discussed.     

Biodegradable interpolyelectrolyte complexes based on methoxy poly(ethylene glycol)-b-poly(alpha,L-glutamic acid) and chitosan

We synthesized methoxy poly(ethylene glycol)-b-poly(alpha,L-glutamic acid) (mPEGGA) diblock copolymer by ring-opening polymerization of N-carboxy anhydride of gamma-benzyl-L-glutamate (NCA) using amino-terminated methoxy polyethylene glycol (mPEG) as macroinitiator. Polyelectrolyte complexation between mPEGGA as neutral-block-polyanion and chitosan (CS) as polycation has been scrutinized in aqueous solution as well as in the solid state. Water-soluble polyelectrolyte complexes (PEC) can be formed only under nonstoichiometric condition while phase separation is observed when approaching 1:1 molar mixing ratio in spite of the existence of hydrophilic mPEG block. This is likely due to mismatch in chain length between polyanion block of the copolymer and the polycation or hydrogen bonding between the components. Hydrodynamic size of primary or soluble PEC is determined to be about 200 nm, which is larger than those reported in some literatures. The increase in polyion chain length of the copolymer leads to the increase in the hydrodynamic size of the water-soluble PEC. Formation of spherical micelles by the mPEGGA/CS complex at nonstoichiometirc condition has been confirmed by the scanning electron microscopy observation and transmission electron microscopy observations. The homopolymer CS experiences attractive interaction with both mPEGA and PGA blocks within the copolymer. Competition of hydrogen bonding and electrostatic force in the system or hydrophilic mPEG segments weakens the electrostatic interaction between the oppositely charged polyions. The existence of hydrogen bonding restrains the mobility of mPEG chains of the copolymer and completely prohibits crystallization of mPEG segments. In vitro culture of human fibroblasts indicates that mPEGGA/CS-based materials have potential in biomedical application, especially in tissue engineering.     

Peptide-derivatized shell-cross-linked nanoparticles. 1. Synthesis and characterization

The conjugation of the protein transduction domain (PTD) from the HIV-1 Tat protein to shell-cross-linked (SCK) nanoparticles is reported as a method to facilitate cell surface binding and transduction of SCK nanoparticles. Attaching increasing numbers of peptide sequences to SCK nanoparticles in a global solution-state functionalization strategy has been devised as a method for increasing the efficiency of the cell-penetrating process. The numbers of peptides per SCK were controlled through stoichiometric balance and measured experimentally by two independent methods, UV-visible spectroscopy and phenylglyoxal analysis. PTD was conjugated in (0.005, 0.01, and 0.02) molar ratios, relative to the acrylic acid residues in the shell, to the SCK nanoparticles resulting in SCK populations possessing nominally 52, 104, and 210 (41, 83, and 202 as measured by phenylglyoxal analysis) PTD peptides per particle, respectively. The methodologies for the block copolymer and nanoparticle syntheses, peptide derivatization, and characterization of peptide-functionalized SCK nanoparticles are reported and the feasibility and efficiency of intracellular internalization of the respective SCKs were quantified.     

Separation and purification of methoxypoly(ethylene glycol) grafted red blood cells via two-phase partitioning

Alloimmunization to donor blood group antigens remains a significant problem in transfusion medicine. To attenuate the risk of alloimmunization, we have pioneered the membrane grafting of methoxypoly(ethylene glycol) (mPEG) to produce immunocamouflaged red blood cells (RBC). Grafting of the mPEG was accomplished using cyanuric chloride activated mPEG (CmPEG; M(r) = 5000), benzotriazole carbonate methoxyPEG (BTCmPEG; M(r) = 2000, 5000 or 20000); or N-hydroxysuccinimidyl ester of mPEG propionic acid (SPAmPEG; M(r) = 5000, or 20000). Because of the heterogeneity of grafting, a crucial tool in developing the stealth RBC is an ability to purify the modified RBC from unmodified (immunogenic) donor cells. As demonstrated, a (5, 4) dextran:PEG aqueous two-phase polymer partitioning system cleanly separated the immunologically silent mPEG-grafted human RBC from control or lightly modified cells. Cell mixing experiments employing varying ratios of mPEG-modified and control RBC confirmed the purification efficacy of the phase partitioning system. Proportional changes in PEG-rich phase partitioning were achieved by increasing either the quantity of surface mPEG or the mPEG molecular weight. The biological viability of purified mPEG-RBC (BTCmPEG; [M(r) = 20000) was demonstrated by their normal in vivo survival at immunoprotective grafting concentrations (相似文献   

Synthesis, characterization, and bioavailability of mannosylated shell cross-linked nanoparticles

Saccharide-functionalized shell cross-linked (SCK) polymer micelles designed as polyvalent nanoscaffolds for selective interactions with receptors on Gram negative bacteria were constructed from mixed micelles composed of poly(acrylic acid-b-methyl acrylate) and mannosylated poly(acrylic acid-b-methyl acrylate). The mannose unit was conjugated to the hydrophilic chain terminus of the amphiphilic diblock copolymer precursor, from which the SCK nanoparticles were derived, by the growth of the diblock copolymer from a mannoside functionalized atom transfer radical polymerization (ATRP) initiator. Mixed micelle formation between the amphiphilic diblock copolymer and mannosylated amphiphilic diblock copolymer was followed by condensation-based cross-linking between the acrylic acid residues present in the periphery of the polymer micelles to afford SCK nanoparticles. SCKs presenting variable numbers of mannose functionalities were prepared from mixed micelles of controlled stoichiometric ratios of mannosylated and nonmannosylated diblock copolymers. The polymer micelles and SCKs were characterized by dynamic light scattering (DLS), electrophoretic light scattering, atomic force microscopy (AFM), transmission electron microscopy (TEM), and analytical ultracentrifugation (AU). Surface availability and bioactivity of the mannose units were evaluated by interactions of the nanostructures with the model lectin Concanavalin A via DLS studies, with red blood cells (rabbit) via agglutination inhibition assays and with bacterial cells (E. coli) via TEM imaging.     

Hydration of proteins: SAXS study of native and methoxy polyethyleneglycol (mPEG)-modified L-asparaginase and bovine serum albumin in mPEG solutions

Two mPEG-modified globular proteins [mPEG: methoxy poly(ethylene glycol)], and their native unmodified forms, were examined by small-angle x-ray scattering to evaluate the extent of their surface hydration. The effects of free and protein-bound mPEG on the hydration shell were modeled with discrete electron density profiles. We show that an mPEG-depleted layer can account for the decrease in the measured radius of gyration R(g) from 34.1 to 31.1 A in native L-asparaginase, and from 32.4 to 31.0 A in native bovine serum albumin (BSA) in mPEG-containing solvents. For mPEG-modified proteins in mPEG-free solvents, we attribute the observed increase in the R(g) over that of the native proteins (approximately 3% in L-asparaginase, and 10% in BSA) to the presence of mPEG on the protein surface. The R(g) of the mPEG-modified proteins in mPEG solutions generally decrease with mPEG concentration. Relative to the corresponding unmodified protein, this decrease in R(g) is much larger in BSA (from 35.6 to 31.2 A) but much smaller (from 34.9 to 34.3 A) in L-asparaginase. From these studies, the thickness of the hydration layer around L-asparaginase and BSA is estimated to be approximately 15 A. Exclusion of polyols from the protein domain could be related to the presence of the hydration shell around the protein.     

Synthesis and characterization of a head-tail type polycation block copolymer as a nonviral gene vector

A head-tail type polycation block copolymer, which is composed of the polyamidoamine (PAMAM) dendron and poly(L-lysine) (PLL) blocks, was newly designed as a nonviral gene vector in this study. This block copolymer (PAMAM dendron-PLL) was successfully synthesized in two steps: the synthesis of the PAMAM dendron block and the polymerization of the PLL block from the PAMAM dendron block. PAMAM dendron and PLL blocks in block copolymer showed independent deprotonation behavior, and their pK(a) were determined to be 6.8 and 9.0, respectively. The complexation with pDNA was evaluated by gel retardation assay and dye exclusion assay, and both assays indicated that pDNA was selectively complexed with PLL block of block copolymer. Also, the PAMAM dendron-PLL poplyplexes showed 10(2) fold higher transfection efficiency to HeLa cells as that for PLL polyplexes. This might be due to the buffering effect of the PAMAM dendron block. This block copolymer could produce a function share in each block, i.e., tail block complexed with pDNA and head block showed a buffering effect. This molecular design of the head-tail type block copolymer might provide a new approach for realizing in vivo gene therapy.     

Packaging of DNA by shell crosslinked nanoparticles.

We demonstrate compaction of DNA with nanoscale biomimetic constructs which are robust synthetic analogs of globular proteins. These constructs are approximately 15 nm in diameter, shell crosslinked knedel-like (SCKs) nanoparticles, which are prepared by covalent stabilization of amphiphilic di-block co-polymer micelles, self-assembled in an aqueous solution. This synthetic approach yields size-controlled nanoparticles of persistent shape and containing positively charged functional groups at and near the particle surface. Such properties allow SCKs to bind with DNA through electrostatic interactions and facilitate reduction of the DNA hydrodynamic diameter through reversible compaction. Compaction of DNA by SCKs was evident in dynamic light scattering experiments and was directly observed by in situ atomic force microscopy. Moreover, enzymatic digestion of the DNA plasmid (pBR322, 4361 bp) by Eco RI was inhibited at low SCK:DNA ratios and prevented when [le]60 DNA bp were bound per SCK. Digestion by Msp I in the presence of SCKs resulted in longer DNA fragments, indicating that not all enzyme cleavage sites were accessible within the DNA/SCK aggregates. These results have implications for the development of vehicles for successful gene therapy applications.     

Camouflaging endothelial cells: does it prolong graft survival?

Camouflaging antigens on the surface of cells seems an appealing way to prevent activation of the immune system. We explored the possibility of preventing hyperacute rejection by chemically camouflaging endothelial cells (EC). In vitro as well as in vivo experiments were performed. First, the ability of mPEG coating to prevent antibody-antigen interactions was evaluated. Second, we tested the degree to which mPEG coating prevents activation of EC by stimuli such as TNF-alpha and LPS. Third, in vivo experiments were performed to test the ability of mPEG coating to prolong xenograft survival. We demonstrate that binding of several antibodies to EC or serum proteins can be inhibited by mPEG. Furthermore, binding of TNF-alpha as well as LPS to EC is blocked since mPEG treatment of EC inhibits the subsequent up-regulation of E-selectin by these stimuli. However, in vivo experiments revealed that currently this method alone is not sufficient to prevent hyperacute rejection.     

Decisive role of hydrophobic side groups of polypeptides in thermosensitive gelation

Thermosensitive hydrogels based on PEG and poly(l-glutamate)s bearing different hydrophobic side groups were separately synthesized by the ring-opening polymerization (ROP) of l-glutamate N-carboxyanhydrides containing different alkyl protected groups, that is, methyl, ethyl, n-propyl, and n-butyl, using mPEG(45)-NH(2) as macroinitiator. The resulting copolymers underwent sol-gel transitions in response to temperature change. Interestingly, the polypeptides containing methyl and ethyl showed significantly lower critical gelation temperatures (CGTs) than those bearing n-propyl and butyl side groups. Based on the analysis of (13)C NMR spectra, DLS, circular dichroism spectra, and ATR-FTIR spectra, the sol-gel transition mechanism was attributed to the dehydration of poly(ethylene glycol) and the increase of β-sheet conformation content in the polypeptides. The in vivo gelation test indicated that the copolymer solution (6.0 wt %) immediately changed to a gel after subcutaneous injection into rats. The mass loss of the hydrogel in vitro was accelerated in the presence of proteinase K, and the MTT assay revealed that the block copolymers exhibited no detectable cytotoxicity. The present work revealed that subtle variation in the length of a hydrophobic side group displayed the decisive effect on the gelation behavior of the polypeptides. In addition, the thermosensitive hydrogels could be promising materials for biomedical applications due to their good biocompatibility, biodegradability, and the fast in situ gelation behavior.     

The Investigation on Polyion Complex Micelles Composed of Diammonium Glycyrrhizinate/Poly(Ethylene Glycol)–Glycidyltrimethylammonium Chloride-Grafted Polyasparthydrazide

To prepare stable polyion complex (PIC) micelles, polyasparthydrazide (PAHy) modified with glycidyltrimethylammonium groups and methoxy poly(ethylene glycol) (mPEG) (mPEG-g-PAHy-GTA) was synthesized. The cytotoxicity of the polymer was evaluated by the methyl tetrazolium assay. The polymer entrapped the diammonium glycyrrhizinate (DG) and formed polyion complexes. The effect of pH value, grafting degree of mPEG, copolymer and drug concentration on the micelle formation was investigated by means of measuring entrapment efficiency and micelle size. In vitro DG release from the PIC micelles was detected by dialysis in various media of different ionic strengths. To examine the pharmacokinetic behavior of micelles in vivo, the time course of the drug in plasma was evaluated. The cytotoxicity of the polymer was very low. The results showed that entrapment efficiency can reach about 93%, and the mean particle size was almost 50 nm. The drug release rate decreased with a decrease in ionic strength of the release medium or an increase in the PEG grafting degree. Compared with DG solution, the AUC of DG micelles had a twofold increase. The smaller clearance and longer mean residence time of the DG micelles group compared with DG solution group showed that the DG loaded in PIC micelles can reduce drug elimination and prolong the drug residence time in the blood circulation. The results indicated that PIC micelles composed of mPEG-g-PAHy-GTA would be prospective as a drug carrier to the drugs which can be ionized in solution.KEY WORDS: diammonium glycyrrhizinate, drug delivery systems, poly(ethylene glycol)–glycidyltrimethylammonium chloride-grafted polyasparthydrazide, polyion complex micelles     

Monomolecular assembly of siRNA and poly(ethylene glycol)-peptide copolymers

In this work, we design and investigate the complex formation of highly uniform monomolecular siRNA complexes utilizing block copolymers consisting of a cationic peptide moiety covalently bound to a poly(ethylene glycol) (PEG) moiety. The aim of the study was to design a shielded siRNA construct containing a single siRNA molecule to achieve a sterically stabilized complex with enhanced diffusive properties in macromolecular networks. Using a 14 lysine-PEG (K14-PEG) linear diblock copolymer, formation of monomolecular siRNA complexes with a stoichiometric 1:3 grafting density of siRNA to PEG is realized. Alternatively, similar PEGylated monomolecular siRNA particles are achieved through complexation with a graft copolymer consisting of six cationic peptide side chains bound to a PEG backbone. The hydrodynamic radii of the resulting complexes as measured by fluorescence correlation spectroscopy (FCS) were found to be in good agreement with theoretical predictions using polymer brush scaling theory of a PEG decorated rodlike molecule. It is furthermore demonstrated that the PEG coating of the siRNA-PEG complexes can be rendered biodegradable through the use of a pH-sensitive hydrazone or a reducible disulfide bond linker between the K14 and the PEG blocks. To model transport under in vivo conditions, diffusion of these PEGylated siRNA complexes is studied in various charged and uncharged matrix materials. In PEG solutions, the diffusion coefficient of the siRNA complex is observed to decrease with increasing polymer concentration, in agreement with theory of probe diffusion in semidilute solutions. In charged networks, the behavior is considerably more complex. FCS measurements in fibrin gels indicate complete dissociation of the diblock copolymer from the complex, while transport in collagen solutions results in particle aggregation.     

Biophysical consequences of linker chemistry and polymer size on stealth erythrocytes: size does matter

Immunocamouflaged red blood cells (RBC) are produced by cell surface derivatization with methoxypolyethylene glycol (mPEG). These immunologically attenuated cells may reduce the risk of allosensitization in chronically transfused patients. To characterize the effects of differing linker chemistries and polymer lengths, RBC were modified with cyanuric chloride activated mPEG (C-mPEG 5 kDa), benzotriazole carbonate methoxyPEG (BTC-mPEG; 5 or 20 kDa) or N-hydroxysuccinimidyl ester of mPEG propionic acid (SPA-mPEG; 2, 5 or 20 kDa). Biophysical methods including particle electrophoresis and aqueous two-phase polymer partitioning were employed to compare the PEG derivatives. While C-mPEG was faster reacting, both BTC-mPEG and SPA-mPEG gave comparable findings after 1 h. Both PEG surface density and molecular mass had a large effect on RBC surface properties. Proportional changes in electrophoretic mobility and preferential phase partitioning were achieved by increasing either the quantity of surface PEG or the PEG molecular mass. In addition, two-phase partitioning may provide a means for efficiently removing unmodified or lightly modified (hence potentially immunogenic) RBC in the clinical setting. Furthermore, mPEG modification significantly inhibits cell-cell interaction as evidenced by loss of Rouleaux formation and, consequently, sedimentation rate. Importantly, BTC-mPEG 20 kDa RBC showed normal in vivo survival in mice at immunoprotective concentrations (up to 2 mM).     

Biophysical consequences of linker chemistry and polymer size on stealth erythrocytes: size does matter

Immunocamouflaged red blood cells (RBC) are produced by cell surface derivatization with methoxypolyethylene glycol (mPEG). These immunologically attenuated cells may reduce the risk of allosensitization in chronically transfused patients. To characterize the effects of differing linker chemistries and polymer lengths, RBC were modified with cyanuric chloride activated mPEG (C-mPEG 5 kDa), benzotriazole carbonate methoxyPEG (BTC-mPEG; 5 or 20 kDa) or N-hydroxysuccinimidyl ester of mPEG propionic acid (SPA-mPEG; 2, 5 or 20 kDa). Biophysical methods including particle electrophoresis and aqueous two-phase polymer partitioning were employed to compare the PEG derivatives. While C-mPEG was faster reacting, both BTC-mPEG and SPA-mPEG gave comparable findings after 1 h. Both PEG surface density and molecular mass had a large effect on RBC surface properties. Proportional changes in electrophoretic mobility and preferential phase partitioning were achieved by increasing either the quantity of surface PEG or the PEG molecular mass. In addition, two-phase partitioning may provide a means for efficiently removing unmodified or lightly modified (hence potentially immunogenic) RBC in the clinical setting. Furthermore, mPEG modification significantly inhibits cell-cell interaction as evidenced by loss of Rouleaux formation and, consequently, sedimentation rate. Importantly, BTC-mPEG 20 kDa RBC showed normal in vivo survival in mice at immunoprotective concentrations (up to 2 mM).     

Functionalization of poly(ethylene terephthalate) fibers by photografting of a carbohydrate derivatized with a phenyl azide group

Grafting of a new carbohydrate UV-reactive molecule, an azidophenyl lactamine (AzPhLac), was achieved on fibers of three different diameters: 12, 18, and 32 microm. Adsorption of AzPhLac on fibers was obtained by using the dip-coating method in solution. The effect of the solution concentration on surface density and yield of grafted AzPhLac was investigated. Surface densities in the range 3-67 nmol/cm2 were obtained without marked difference related to the diameter of the fiber. Quantitative grafting was obtained with a surface of fiber of 1 cm2 and the lowest concentration (0.5 mM) of AzPhLac solution. The surface density and grafting yield decreased with the available surface of the fibers. This phenomenon could be attributed to a masking core-shell effect with outer fibers in the shell preventing the UV grafting of the fibers located in the core of the fibers' bundles. Scanning electron (SEM) and atomic force (AFM) microscopic observations suggested that homogeneous grafting might be obtained.     

Dual peptide nucleic acid- and peptide-functionalized shell cross-linked nanoparticles designed to target mRNA toward the diagnosis and treatment of acute lung injury

In this work, multifunctional biosynthetic hybrid nanostructures were prepared and studied for their potential utility in the recognition and inhibition of mRNA sequences for inducible nitric oxide synthase (iNOS), which are overexpressed at sites of inflammation, such as in cases of acute lung injury. Shell cross-linked knedel-like polymer nanoparticles (SCKs) that present peptide nucleic acids, for binding to complementary mRNAs, and cell penetrating peptides (CPPs), to gain cell entry, along with fluorescent labels and sites for radiolabeling, were prepared by a series of robust, efficient, and versatile synthetic steps that proceeded from monomers to polymers to functional nanoparticles. Amphiphilic block graft copolymers having combinations of methoxy- and thioacetyl-terminated poly(ethylene glycol) (PEG) and DOTA-lysine units grafted from the backbone of poly(acrylic acid) (PAA) and extending with a backbone segment of poly(octadecyl acrylate-co-decyl acrylate) (P(ODA-co-DA)) were prepared by a combination of reversible addition-fragmentation chain transfer (RAFT) polymerization and chemical modification reactions, which were then used as the building blocks for the formation of well-defined SCKs decorated with reactive thiols accessible to the surface. Fluorescent labeling with Alexa Fluor 633 hydrazide was then accomplished by amidation with residual acrylic acid residues within the SCK shells. Finally, the PNAs and CPP units were covalently conjugated to the SCKs via Michael addition of thiols on the SCKs to maleimide units on the termini of PNAs and CPPs. Confirmation of the ability of the PNAs to bind selectively to the target iNOS mRNAs when tethered to the SCK nanoparticles was determined by in vitro competition experiments. When attached to the SCKs having a hydrodynamic diameter of 60 ± 16 nm, the K(d) values of the PNAs were ca. an order of magnitude greater than the free PNAs, while the mismatched PNA showed no significant binding.     

Synthesis and characterization of poly(ethylene glycol)-insulin conjugates

Human insulin was modified by covalent attachment of short-chain (750 and 2000 Da) methoxypoly (ethylene glycol) (mPEG) to the amino groups of either residue PheB1 or LysB29, resulting in four distinct conjugates: mPEG(750)-PheB1-insulin, mPEG(2000)-PheB1-insulin, mPEG(750)-LysB29-insulin, and mPEG(2000)-LysB29-insulin. Characterization of the conjugates by MALDI-TOF mass spectrometry and N-terminal protein sequence analyses verified that only a single polymer chain (750 or 2000 Da) was attached to the selected residue of interest (PheB1 or LysB29). Equilibrium sedimentation experiments were performed using analytical ultracentrifugation to quantitatively determine the association state(s) of insulin derivatives. In the concentration range studied, all four of the conjugates and Zn-free insulin exist as stable dimers while Zn(2+)-insulin was exclusively hexameric and Lispro was monomeric. In addition, insulin (conjugate) self-association was evaluated by circular dichroism in the near-ultraviolet wavelength range (320-250 nm). This independent method qualitatively suggests that mPEG-insulin conjugates behave similarly to Zn-free insulin in the concentration range studied and complements results from ultracentrifugation studies. The physical stability/resistance to fibrillation of mPEG-insulin conjugates in aqueous solution were assessed. The data proves that mPEG(750 and 2000)-PheB1-insulin conjugates are substantially more stable than controls but the mPEG(750 and 2000)-LysB29-insulin conjugates were only slightly more stable than commercially available preparations. Circular dichroism studies done in the far ultraviolet region confirm insulin's tertiary structure in aqueous solution is essentially conserved after mPEG conjugation. In vivo pharmacodynamic assays reveal that there is no loss in biological activity after conjugation of mPEG(750) to either position on the insulin B-chain. However, attachment of mPEG(2000) decreased the bioactivity of the conjugates to about 85% of Lilly's HumulinR formulation. The characterization presented in this paper provides strong testimony to the fact that attachment of mPEG to specific amino acid residues of insulin's B-chain improves the conjugates' physical stability without appreciable perturbations to its tertiary structure, self-association behavior, or in vivo biological activity.     

Xanthan-g-poly(acrylamide): Microwave-assisted synthesis,characterization and in vitro release behavior

Xanthan-g-poly(acrylamide) was synthesized employing microwave-assisted and ceric-induced graft copolymerization, and was characterized by FT-IR, DSC, XRD and SEM studies. Matrix tablets of diclofenac sodium were formulated using graft copolymer as the matrix by direct compression technique. Release behavior of the graft copolymer was evaluated using USP type-II dissolution apparatus in 900 ml of phosphate buffer (pH 6.8), maintained at 37 °C and at 50 rpm. Microwave-assisted grafting provided graft copolymer with higher % grafting in a shorter time in comparison to the ceric-induced grafting. The % grafting was found to increase with the increase in the power of microwave and/or time of exposure. The matrix tablets were found to release the drug by zero-order kinetics, and the faster release of drug was observed from the graft copolymer matrix as compared to the xanthan gum matrix. It was observed that grafting reduces the swelling, but increases the erosion of xanthan gum.