Reversal of profilin inhibition of actin polymerization invitro by erythrocyte cytochalasin-binding complexes and cross-linked actin nuclei

Actin polymerization in 2 mM MgCl₂ is known to be inhibited by profilin. We found that small amounts of cytochalasin-binding complexes from human red cell membranes or actin nuclei cross-linked by $\text{p}\text{-}\text{NN′}$-phenylenebismaleimide can reverse the inhibitory action of profilin, leading to the rapid polymerization of the actin. This type of polymerization is inhibited by low concentrations of cytochalasin B. These results indicate that (a) the complexes and nuclei promote actin polymerization in the presence of profilin by providing sites onto which actin monomers can be added, and (b) profilin and cytochalasin B affect two distinct steps (i.e. nucleus formation and filament elongation, respectively) in the polymerization reaction.     

The use of affinity elution from Blue Dextran Sepharose by yeast tRNA2Val in the complete purification of the cytoplasmic valyl-tRNA synthetase from Euglena gracilis

Two distinct monomers, α and β participate in the structures of diffe$\text{r}$ ent oligomers of $\text{Neurospora crassa}$ glutamine synthetase (EC 6. 3. 1. 2). In ammonium-limited cultures a tetrameric form composed mainly of α monomers was found. In excess of nitrogen an octameric form composed mainly from β monomers is the predominant oligomeric state. The presence of both monomers was observed in intermediate oligomeric forms.     

Functional properties of acetylcholine receptor monomeric and dimeric forms in reconstituted membranes

The dimeric and monomeric forms of the acetylcholine receptor from $\text{Torpedo californica}$ electroplax have been purified in the presence of lipids and reconstituted. A spectroscopic method was applied to study the rapid kinetics of cation transport mediated by each of the reconstituted AcChR oligomers. Both the AcChR dimer and monomer responded to carbamylcholine by mediating cation transport on the time scale of a few milliseconds. The responses to carbamylcholine were blocked by histrionicotoxin and by desensitization, demonstrating that both forms manifest pharmacological properties observed $\text{in vivo}$. Analysis of the fast ion transport produced by various agonist concentrations yielded estimated rates of transport through a single receptor channel. These were comparable for the monomer and dimer and in agreement with those obtained for a preparation containing a mixture of both oligomers.     

Structures of the two 3D domain-swapped RNase A trimers

When concentrated in mildly acidic solutions, bovine pancreatic ribonuclease (RNase A) forms long-lived oligomers including two types of dimer, two types of trimer, and higher oligomers. In previous crystallographic work, we found that the major dimeric component forms by a swapping of the C-terminal beta-strands between the monomers, and that the minor dimeric component forms by swapping the N-terminal alpha-helices of the monomers. On the basis of these structures, we proposed that a linear RNase A trimer can form from a central molecule that simultaneously swaps its N-terminal helix with a second RNase A molecule and its C-terminal strand with a third molecule. Studies by dissociation are consistent with this model for the major trimeric component: the major trimer dissociates into both the major and the minor dimers, as well as monomers. In contrast, the minor trimer component dissociates into the monomer and the major dimer. This suggests that the minor trimer is cyclic, formed from three monomers that swap their C-terminal beta-strands into identical molecules. These conclusions are supported by cross-linking of lysyl residues, showing that the major trimer swaps its N-terminal helix, and the minor trimer does not. We verified by X-ray crystallography the proposed cyclic structure for the minor trimer, with swapping of the C-terminal beta-strands. This study thus expands the variety of domain-swapped oligomers by revealing the first example of a protein that can form both a linear and a cyclic domain-swapped oligomer. These structures permit interpretation of the enzymatic activities of the RNase A oligomers on double-stranded RNA.     

Treadmilling of actin at physiological salt concentrations: An analysis of the critical concentrations of actin filaments

Treadmilling of actin was investigated at physiological salt concentrations (100 mm-KCl, 0.5 to 2.0 mm-MgCl₂, 200 μm-ethyleneglycol-bis(β-aminoethyl ether)N,N′-tetraacetic acid or 50 μm-CaCl₂ at 37 °C. The concentration at which monomers bind to the lengthening end of filaments with the same rate as subunits are released (low critical concentration c₁ was determined by mixing unmodified actin filaments with various concentrations of monomeric actin labeled with 7-chloro-4-nitrobenzo-2-oxa-1,3-diazole. Above a monomeric actin concentration of about 0.12 μm, incorporation of actin molecules into filaments was detected, whereas below this concentration no incorporation was found (c₁ = 0.12 μm). Combination of various concentrations of labeled monomers with labeled filaments permitted determination of the net critical concentration ($\text{c}{}_1$) at which filaments lengthen at one end with the same rate as they shorten at the other end ($\text{c}{}_1\text{= 0.16}\text{μm}$). A lower limit of the high critical concentration at the shortening end (c_h) was estimated by measuring the release of subunits from labeled filaments in the presence of various concentrations of unlabeled monomers (c_h >0.5 μm). The differences in the three critical concentrations demonstrate that under physiological conditions actin filaments lengthen at one end by, on the average, one subunit during the time that four association reactions take place at the two ends (efficiency parameters $\text{s =}\text{1}\text{4}$). The small difference between the low and the net critical concentration suggests that the rates of both association and dissociation are considerably greater at the lengthening end than at the shortening end of actin filaments.     

SecAAA trimer is fully functional as SecAA dimer in the membrane: Existence of higher oligomers?

SecA is an essential ATPase in bacterial Sec-dependent protein translocation pathway, and equilibrates between monomers and dimers in solution. The question of whether SecA functions as monomers or dimers in membranes during the protein translocation is controversial. We previously constructed a tail-to-head SecAA tandem dimer, and showed it is fully functional by complementation in vivo and protein translocation in vitro, indicating that SecA can function at least as a dimer in the membrane without dissociating into monomers. In this study, we further constructed genetically a tail-to-head SecAAA trimer, which is functional in complementing a temperature-sensitive secA mutant. The purified SecAAA trimer per protomer is fully active as SecAA tandem dimers in ATPase activity, in protein translocation in vitro and in ion channel activities in the oocytes. With these functional tail-to-head trimer SecAAA and tandem SecAA, we examined their surface topology in the presence of liposomes using AFM. As expected, the soluble SecAAA without lipids are larger than SecAA. However, the ring/pore structures of SecAAA trimers were, surprisingly, almost identical to the SecA 2-monomers and SecAA dimers, raising the intriguing possibility that the SecA may exist and function as hexamer ring-structures in membranes. Cross-linking with formaldehyde showed that SecA, SecAA and SecAAA could form larger oligomers, including the hexamers. The molecular modeling simulation shows that both tail-to-head and tail-to-tail hexamers in the membranes are possible.     

Secondary structure of peptides: 8. 13C n.m.r. CP/MAS investigation of solid poly(l-leucines) and poly(d-norvalines) prepared from N-carboxyanhydrides

¹³C n.m.r. CP/MAS spectra (50.3 and 75.4 MHz) of solid poly(l-lleucines) and poly(d-norvalines) measured with suitable acquisition parameters allow quantification of the composition of the secondary structure. The optimum acquisition parameters were found by systematic variation of the contact time by means of samples containing 5?0% α-helix structure. The polypeptides were prepared by primary or tertiary amine-initiated polymerizations of the corresponding amino acid NCAs and the average degrees of polymerization ($\text{DP}$) were determined by ¹H n.m.r. endgroup analysis. The mole fraction of α-helices increases with increasing $\text{DP}$; it depends on the nature of the solvent and to a lesser degree on the polymerization temperature. When prepared under identical conditions, poly(d-norvaline) samples contain more β-sheet structure than poly(l-leucine. Reprecipitation increases the α-helix content, demonstrating that a part of the original β-sheet structure is thermodynamically unstable. The presence of oligomers of $\text{DP}$ ?10 is mainly responsible for the thermodynamically stable part of the β-sheet structure. The chain growth mechanism is discussed.     

Structural Differences Explain Diverse Functions of Plasmodium Actins

Actins are highly conserved proteins and key players in central processes in all eukaryotic cells. The two actins of the malaria parasite are among the most divergent eukaryotic actins and also differ from each other more than isoforms in any other species. Microfilaments have not been directly observed in Plasmodium and are presumed to be short and highly dynamic. We show that actin I cannot complement actin II in male gametogenesis, suggesting critical structural differences. Cryo-EM reveals that Plasmodium actin I has a unique filament structure, whereas actin II filaments resemble canonical F-actin. Both Plasmodium actins hydrolyze ATP more efficiently than α-actin, and unlike any other actin, both parasite actins rapidly form short oligomers induced by ADP. Crystal structures of both isoforms pinpoint several structural changes in the monomers causing the unique polymerization properties. Inserting the canonical D-loop to Plasmodium actin I leads to the formation of long filaments in vitro. In vivo, this chimera restores gametogenesis in parasites lacking actin II, suggesting that stable filaments are required for exflagellation. Together, these data underline the divergence of eukaryotic actins and demonstrate how structural differences in the monomers translate into filaments with different properties, implying that even eukaryotic actins have faced different evolutionary pressures and followed different paths for developing their polymerization properties.     

Proteinase inhibitor synthesis in tomato leaves : induction by chitosan oligomers and chemically modified chitosan and chitin

Soluble chemical derivatives of chitin and chitosan including ethylene glycol chitin, nitrous acid-modified chitosan, glycol chitosan, and chitosan oligomers, produced from chitosan by limited hydrolysis with HCl, were found to possess proteinase inhibitor inducing activities when supplied to young excised tomato (Lycopersicon esculentum var Bonnie Best) plants. Nitrous acid-modified chitosans and ethylene glycol chitin exhibited about 2 to 3 times the activity of acid hydrolyzed chitosan and 15 times more activity than glycol chitosan. The parent chitin and chitosans are insoluble in water or neutral buffers and cannot be assayed. Glucosamine and its oligomers from degree of polymerization = 2 through degree of polymerization = 6 were purified from acid-fragmented chitosan and assayed. The monomer was inactive and dimer and trimer exhibited weak activities. Tetramer possessed higher activity and the larger pentamer and hexamer oligomers were nearly as active as the total hydrolyzed mixture. None of the fragments exhibited more than 2% acetylation (the limits of detection). The contents of the acid-fragmented mixture of oligomers was chemically N-acetylated to levels of 13% and 20% and assayed. The N-acetylation neither inhibited nor enhanced the proteinase inhibitor inducing activity of the mixture. These results, along with recent findings by others that chitinases and chitosanases are present in plants, provide further evidence for a possible role of soluble chitosan fragments as signals to activate plant defense responses.     

Structure of an F-actin trimer disrupted by gelsolin and implications for the mechanism of severing

Stable oligomers of filamentous actin were obtained by cross-linking F-actin with 1,4-N,N'-phenylenedimaleimide and depolymerization with excess segment-1 of gelsolin. Segment-1-bound and cross-linked actin oligomers containing either two or three actin subunits were purified and shown to nucleate actin assembly. Kinetic assembly data from mixtures of monomeric actin and the actin oligomers fit a nucleation model where cross-linked actin dimer or trimer reacts with an actin monomer to produce a competent nucleus for filament assembly. We report the three-dimensional structure of the segment-1-actin hexamer containing three actin subunits, each with a tightly bound ATP. Comparative analysis of this structure with twelve other actin structures provides an atomic level explanation for the preferential binding of ATP by the segment-1-complexed actin. Although the structure of segment-1-bound actin trimer is topologically similar to the helical model of F-actin (1), it has a distorted symmetry compared with that of the helical model. This distortion results from intercalation of segment-1 between actin protomers that increase the rise per subunit and rotate each of the actin subunits relative to their positions in F-actin. We also show that segment-1 of gelsolin is able to sever actin filaments, although the severing activity of segment-1 is significantly lower than full-length gelsolin.     

AFM Imaging Reveals Topographic Diversity of Wild Type and Z Variant Polymers of Human α1-Proteinase Inhibitor

α₁-Proteinase inhibitor (antitrypsin) is a canonical example of the serpin family member that binds and inhibits serine proteases. The natural metastability of serpins is crucial to carry out structural rearrangements necessary for biological activity. However, the enhanced metastability of the mutant Z variant of antitrypsin, in addition to folding defect, may substantially contribute to its polymerization, a process leading to incurable serpinopathy. The metastability also impedes structural studies on the polymers. There are no crystal structures of Z monomer or any kind of polymers larger than engineered wild type (WT) trimer. Our understanding of polymerization mechanisms is based on biochemical data using in vitro generated WT oligomers and molecular simulations. Here we applied atomic force microscopy (AFM) to compare topography of monomers, in vitro formed WT oligomers, and Z type polymers isolated from transgenic mouse liver. We found the AFM images of monomers closely resembled an antitrypsin outer shell modeled after the crystal structure. We confirmed that the Z variant demonstrated higher spontaneous propensity to dimerize than WT monomers. We also detected an unexpectedly broad range of different types of polymers with periodicity and topography depending on the applied method of polymerization. Short linear oligomers of unit arrangement similar to the Z polymers were especially abundant in heat-treated WT preparations. Long linear polymers were a prominent and unique component of liver extracts. However, the liver preparations contained also multiple types of oligomers of topographies undistinguishable from those found in WT samples polymerized with heat, low pH or guanidine hydrochloride treatments. In conclusion, we established that AFM is an excellent technique to assess morphological diversity of antitrypsin polymers, which is important for etiology of serpinopathies. These data also support previous, but controversial models of in vivo polymerization showing a surprising diversity of polymer topography.     

Structural changes in thin filaments of crab striated muscle.

Low angle X-ray diffraction patterns were recorded from crab leg muscle in living resting state and in rigor (glycerol-extracted). Both resting and rigor patterns showed a series of layer-lines arising from a helical arrangement of actin subunits in the thin filaments. In the resting state, the crossover repeat of the long-pitch actin helices was 36.6 nm, and the symmetry of the genetic actin helix was an intermediate between $\text{26}\text{12}$ and $\text{28}\text{13}$. When the muscle went into rigor, the crossover repeat changed to 38.3 nm and the helical symmetry to $\text{28}\text{13}$.In the living resting pattern, six other reflections were observed on the meridian and in the near-meridional region. These were indexed as orders of 2 × 38.2 nm and could be assigned to troponin molecules; the spacings and the intensity distributions of these reflections could be explained by the model proposed by Ohtsuki (1974) for the arrangement of troponin molecules in the thin filaments.The muscle in rigor gave meridional and near-meridional reflections at orders of 2 × 38.3 nm. These were identified as the same series of reflections as was assigned to troponin in the living resting pattern, but were more intense and could be seen up to higher orders. We consider that the myosin heads attached to the thin filament at regular intervals along its axis also contribute to these reflections in the rigor pattern.     

Pulse fluorimetry of N-(1-pyrenesulfonyl)dipalmitoyl-l-α-phosphatidylethanolamine in concanavalin A-stimulated human lymphocytes

Human peripheral lymphocytes were cultured with a fluorescent probe, $\text{N-(1-}\text{pyrenesulfonyl)dipalmitoyl}\text{-}\text{l}\text{-α-}\text{phosphatidylethanolamine}$, and with concanavalin A. Fluorescence microscopic observations revealed that in lymphoblasts, pyrenesulfonyl dye was distributed mainly in vacuoles whereas in normal cells cultured without concanavalin A the dye was distributed exclusively in plasma membranes. The fluorescence spectra of the pyrenesulfonyl group incorporated into the cells exhibited two emission maxima, band A (monomer fluorescence of the pyrenesulfonyl group at about 400 nm) and band B (dimer fluorescence of the dye at about 500 nm). The values of the fluorescence lifetime measured at bands A and B indicated that in the absence of concanavalin A, the environment surrounding the pyrenesulfonyl group at the lipid/water interface became more hydrophilic with cultivation time. Concanavalin A made the environment of the interface more hydrophobic than that of lymphocytes cultured without concanavalin A. Fluorescence polarization measured at band A revealed that the mobility of pyrenesulfonyl monomers at the aqueous interface of the membranes was reduced upon concanavalin A stimulation.     

The amino acid sequence of desulforedoxin, a new type of non heme iron protein from Desulfovibrio gigas

A new type of non heme iron protein called desulforedoxin has been isolated from the sulfate reducing bacterium, $\text{Desulfovibrio gigas}$. The complete amino acid sequence has been established. The 36 amino acid residues of the sequence are aligned with the aid of peptides obtained by cyanogen bromide cleavage and by hydrolysis with a peptidase isolated from $\text{Staphylococcus aureus}$. Desulforedoxin has been described as a non heme iron protein of molecular weight 7,600 with 2 iron atoms linked to eight cysteine residues. In fact, sequence elucidation shows that it consists of a dimer of a peptide containing 36 aminoacids. We do not know whether if each monomer contains 1 iron atom linked to 4 cysteine residues or whether the two iron cross link the two monomers. Additional studies on the elucidation of the structure of this new cluster are presently under study.     

Preliminary crystallographic data on the human lambda III Bence Jones protein dimer Cle

A complete human λ Bence Jones protein dimer (Cle) has been isolated and crystallized. Protein Cle was characterized immunochemically and chemically as having a variable region amino acid sequence associated with light chains of the λ chain subgroup, λIII, and a constant region sequence characteristic of “non-Mcg” type λ chains. Bence Jones protein Cle contains two covalently bound intact monomers, each having a molecular weight of ~23,000. Crystals of Bence Jones protein Cle, obtained from ammonium sulfate solutions, diffract to 2.6 Å resolution and have the orthorhombic space group P2₁2₁2₁ with cell dimensions $\text{a = 113.0}\text{A}\text{?}\text{, b = 72.3}\text{A}\text{?}\text{,}\text{and}\text{c = 48.9}\text{A}\text{?}$. The asymmetric unit consists of a dimer with a molecular weight of ~ 46,000.     

Characterization and preliminary crystallographic data on the VL-related fragment of the human kI Bence Jones protein Wat

A “naturally occurring” human κI V_L dimer, designated Wat, has been isolated and crystallized. Protein Wat consists of two non-covalently bound monomers, each having a molecular weight of ~ 11,500. The monomer subunit is composed of an entire variable region light chain (V_L) domain closely homologous to that of the κI Bence Jones protein Roy (Hilschmann &; Craig, 1965) as evidenced from amino acid composition, tryptic peptide map, and sequence analysis. Immunochemical studies substantiated that protein Wat is of the κ chain subgroup κI and lacks the isotypic and allotypic antigenic determinants associated with the κ constant region light chain domain. Two types of crystals of V_L dimer Wat were obtained from ammonium sulfate or polyethylene glycol solutions. The type I crystals have unit cell dimensions of $\text{a = b = 82.6}\text{A}\text{?}\text{, c = 60.3}\text{A}\text{?}$, and the space group is hexagonal P6₂ or P6₄. The asymmetric unit consists of one V_L dimer; the fractional volume of unit cell occupied by solvent is 0.51. The unit cell dimensions of the type II crystals are $\text{a = b = 1,08.3}\text{A}\text{?}\text{, c = 108.8}\text{A}\text{?}$; the space group is hexagonal P6₁22 or P6₅22. Three variable domains constitute the asymmetric unit of the type II crystals; the fractional value of the solvent (0.52) is compatible with the value obtained for the type I crystals.     

Size distribution of linear and helical polymers in actin solution analyzed by photon counting histogram

Actin is a ubiquitous protein that is a major component of the cytoskeleton, playing an important role in muscle contraction and cell motility. At steady state, actin monomers and filaments (F-actin) coexist, and actin subunits continuously attach and detach at the filament ends. However, the size distribution of actin oligomers in F-actin solution has never been clarified. In this study, we investigated the size distribution of actin oligomers using photon-counting histograms. For this purpose, actin was labeled with a fluorescent dye, and the emitted photons were detected by confocal optics (the detection volume was of femtoliter (fL) order). Photon-counting histograms were analyzed to obtain the number distribution of actin oligomers in the detection area from their brightness, assuming that the brightness of an oligomer was proportional to the number of protomers. We found that the major populations at physiological ionic strength were 1-5mers. For data analysis, we successfully applied the theory of linear and helical aggregations of macromolecules. The model postulates three states of actin, i.e., monomers, linear polymers, and helical polymers. Here we obtained three parameters: the equilibrium constants for polymerization of linear polymers, K(l)=(5.2 +/- 1.1) x 10(6) M(-1), and helical polymers, K(h)=(1.6 +/- 0.5) x 10(7) M(-1); and the ratio of helical to linear trimers, gamma = (3.6 +/- 2.3) x 10(-2). The excess free energy of transforming a linear trimer to a helical trimer, which is assumed to be a nucleus for helical polymers, was calculated to be 2.0 kcal/mol. These analyses demonstrate that the oligomeric phase at steady state is predominantly composed of linear 1-5mers, and the transition from linear to helical polymers occurs on the level of 5-7mers.     

Profilin oligomerization and its effect on poly (l-proline) binding and phosphorylation

Profilin is a cytoskeletal protein that interacts specifically with actin, phosphoinositides and poly (l-proline). Experimental results and in silico studies revealed that profilin exists as dimer and tetramer. Profilin oligomers possess weak affinity to poly (l-proline) due to unavailability of binding sites in dimers and tetramers. Phosphorylation studies indicate that profilin dimers are not phosphorylated while teramers are preferentially phosphorylated over monomers. In silico studies revealed that PKC phosphorylation site, S137 is buried in dimer while it is accessible in tetramer.     

Motility of the N-terminal tail of phosphorylase b as revealed by crosslinking.

There are lysyl-ε-NH₂ groups within about 3.5 Å distance across the intersubunit contact area of rabbit muscle phosphorylase $\text{b}$, as shown by cross-linking with malonic diimidate. These include the lysines of N-terminal region as revealed by limited tryptic digestion, but the contribution of the tail lysines to overall formation of covalent dimers is small. The fine structure of dimer band on dodecylsulfate-gelelectrophoretograms of crosslinked phosphorylases suggests that the tail retains its freedom in the phosphorylase $\text{b}$-AMP complex. Amidination induces the dissociation of phosphorylase $\text{b}$ dimer, which is slow relative to crosslinking.     

Toxoplasma gondii Actin Depolymerizing Factor Acts Primarily to Sequester G-actin

Toxoplasma gondii is a protozoan parasite belonging to the phylum Apicomplexa. Parasites in this phylum utilize a unique process of motility termed gliding, which is dependent on parasite actin filaments. Surprisingly, 98% of parasite actin is maintained as G-actin, suggesting that filaments are rapidly assembled and turned over. Little is known about the regulated disassembly of filaments in the Apicomplexa. In higher eukaryotes, the related actin depolymerizing factor (ADF) and cofilin proteins are essential regulators of actin filament turnover. ADF is one of the few actin-binding proteins conserved in apicomplexan parasites. In this study we examined the mechanism by which T. gondii ADF (TgADF) regulates actin filament turnover. Unlike other members of the ADF/cofilin (AC) family, apicomplexan ADFs lack key F-actin binding sites. Surprisingly, this promotes their enhanced disassembly of actin filaments. Restoration of the C-terminal F-actin binding site to TgADF stabilized its interaction with filaments but reduced its net filament disassembly activity. Analysis of severing activity revealed that TgADF is a weak severing protein, requiring much higher concentrations than typical AC proteins. Investigation of TgADF interaction with T. gondii actin (TgACT) revealed that TgADF disassembled short TgACT oligomers. Kinetic and steady-state polymerization assays demonstrated that TgADF has strong monomer-sequestering activity, inhibiting TgACT polymerization at very low concentrations. Collectively these data indicate that TgADF promoted the efficient turnover of actin filaments via weak severing of filaments and strong sequestering of monomers. This suggests a dual role for TgADF in maintaining high G-actin concentrations and effecting rapid filament turnover.