A continuous method for the large-scale extraction of plasmid DNA by modified boiling lysis

This protocol describes a streamlined method of plasmid DNA extraction by continual thermal lysis, a modification of the basic boiling lysis technique, to simplify the processing of large volumes of Escherichia coli cultures. Fermented bacteria are harvested using a hollow fiber-membrane module and pre-treated with lysozyme prior to passing through a thermal exchange coil set at 70 degrees C to lyse the cells, and into a juxtaposed cooling coil on ice. The lysed and cooled bacteria are subsequently separated from the lysate by centrifugation and plasmid DNA is precipitated from the supernatant for further purification. The use of peristaltic pumps and two heating coils at constant temperature without the use of centrifugation enable the lysis process to become constant and controllable, providing a flow-through protocol for cell lysis and plasmid DNA extraction. Large volumes of bacterial cultures (20 l) can be processed in 2 h, yielding approximately 100 mg plasmid DNA l(-1) culture, making this an attractive protocol for consistent and large-scale preparation of plasmid DNA.     

Integration of bacteria capture via filtration and in situ lysis for recovery of plasmid DNA under industry-compatible conditions

Combining capture and lysis of the bacteria with partial purification of the plasmid DNA is beneficial for the design of efficient plasmid production processes at larger scale. Such an approach is possible when the bacteria are captured by filtration. Taking industrial requirements into account, however, such a capture requires complex filtration mixtures containing retentive additives such as bentonite and polycations. This makes the straightforward transfer of established lysis protocols to in situ lysis difficult. In this contribution, the different steps of such a protocol are designed for complex filter cakes, including fragilization (by lysozyme), lysis (alkaline pH/acidic pH, 70/37 degrees C, urea/NaCl/Triton), and specific elution (pH, NaCl, CaCl2, guanidinium hydrochloride). Results are compared in regard to plasmid quality (topoisomeric form) and quantity (compared to the yield obtained by a commercial miniprep of a small aliquot of the bacteria suspension from the bioreactor). Best results in these terms were obtained by the Triton lysis protocol performed at 37 degrees C (30 min of contact with a lysis buffer composed of 50 mM Tris pH 8, 1% Triton, 1 g/L lysozyme, and 6 M guanidinium hydrochloride) followed by the specific elution of the plasmid DNA in 50 mM Tris buffer pH 8.     

Improved lysis of group N streptococci for isolation and rapid characterization of plasmid deoxyribonucleic acid.

Procedures for effective cellular lysis and plasmid deoxyribonucleic acid (DNA) isolation from group N streptococci were developed. Cells were grown at 32 degrees C for 4 h in a modified Elliker broth containing 20 mM DL-threonine. After cellular digestion with 2 mg of lysozyme per ml for 7 min at 37 degrees C, 1% sodium dodecyl sulfate exposure resulted in complete and immediate lysis. Lactose (Lac) plasmid species in Streptococcus lactis C2 and S. cremoris B1 (30 and 37 megadaltons, respectively) were demonstrated upon examination of DNA from the cleared lysates by agarose gel electrophoresis. Increasing the lysozyme treatment to 20 min or more resulted in loss of the Lac plasmid, whereas other resident plasmids were unaffected and demonstrable in agarose gels. Diethylpyrocarbonate added before lysis prevented Lac plasmid loss in 20-min lysozyme-treated cells, but was not effective after 40 min of lysozyme treatment. The results suggested that endogenous nuclease activity during the lysozyme treatment period initiated Lac plasmid DNA loss. The development of an efficient lysis procedure for the group N streptococci allowed rapid identification and characterization of plasmid DNA by agarose gel electrophoresis. The plasmid composition of S. lactis C2 and S. cremoris B1, as determined by agarose gel electrophoresis, compared favorably to previous electron microscopic observations.     

Improved lysis of group N streptococci for isolation and rapid characterization of plasmid deoxyribonucleic acid.

Procedures for effective cellular lysis and plasmid deoxyribonucleic acid (DNA) isolation from group N streptococci were developed. Cells were grown at 32 degrees C for 4 h in a modified Elliker broth containing 20 mM DL-threonine. After cellular digestion with 2 mg of lysozyme per ml for 7 min at 37 degrees C, 1% sodium dodecyl sulfate exposure resulted in complete and immediate lysis. Lactose (Lac) plasmid species in Streptococcus lactis C2 and S. cremoris B1 (30 and 37 megadaltons, respectively) were demonstrated upon examination of DNA from the cleared lysates by agarose gel electrophoresis. Increasing the lysozyme treatment to 20 min or more resulted in loss of the Lac plasmid, whereas other resident plasmids were unaffected and demonstrable in agarose gels. Diethylpyrocarbonate added before lysis prevented Lac plasmid loss in 20-min lysozyme-treated cells, but was not effective after 40 min of lysozyme treatment. The results suggested that endogenous nuclease activity during the lysozyme treatment period initiated Lac plasmid DNA loss. The development of an efficient lysis procedure for the group N streptococci allowed rapid identification and characterization of plasmid DNA by agarose gel electrophoresis. The plasmid composition of S. lactis C2 and S. cremoris B1, as determined by agarose gel electrophoresis, compared favorably to previous electron microscopic observations.     

Effects of temperature on Escherichia coli overproducing beta-lactamase or human epidermal growth factor.

The effects of temperature on strains of Escherichia coli which overproduce and excrete either beta-lactamase or human epidermal growth factor were investigated. E. coli RB791 cells containing plasmid pKN which has the tac promoter upstream of the gene for beta-lactamase were grown and induced with isopropyl-beta-D-thiogalactopyranoside in batch culture at 37, 30, 25, and 20 degrees C. The lower temperature greatly reduced the formation of periplasmic beta-lactamase inclusion bodies, increased significantly the total amount of beta-lactamase activity, and increased the purity of extracellular beta-lactamase from approximately 45 to 90%. Chemostat operation at 37 and 30 degrees C was difficult due to poor cell reproduction and beta-lactamase production. However, at 20 degrees C, continuous production and excretion of beta-lactamase were obtained for greater than 450 h (29 generations). When the same strain carried plasmid pCU encoding human epidermal growth factor, significant cell lysis was observed after induction at 31 and 37 degrees C, whereas little cell lysis was observed at 21 and 25 degrees C. Both total soluble and total human epidermal growth factor increased with decreasing temperature. These results indicate that some of the problems of instability of strains producing high levels of plasmid-encoded proteins can be mitigated by growth at lower temperatures. Further, lower temperatures can increase for at least some secreted proteins both total plasmid-encoded protein formed and the fraction that is soluble.     

Effects of temperature on Escherichia coli overproducing beta-lactamase or human epidermal growth factor

The effects of temperature on strains of Escherichia coli which overproduce and excrete either beta-lactamase or human epidermal growth factor were investigated. E. coli RB791 cells containing plasmid pKN which has the tac promoter upstream of the gene for beta-lactamase were grown and induced with isopropyl-beta-D-thiogalactopyranoside in batch culture at 37, 30, 25, and 20 degrees C. The lower temperature greatly reduced the formation of periplasmic beta-lactamase inclusion bodies, increased significantly the total amount of beta-lactamase activity, and increased the purity of extracellular beta-lactamase from approximately 45 to 90%. Chemostat operation at 37 and 30 degrees C was difficult due to poor cell reproduction and beta-lactamase production. However, at 20 degrees C, continuous production and excretion of beta-lactamase were obtained for greater than 450 h (29 generations). When the same strain carried plasmid pCU encoding human epidermal growth factor, significant cell lysis was observed after induction at 31 and 37 degrees C, whereas little cell lysis was observed at 21 and 25 degrees C. Both total soluble and total human epidermal growth factor increased with decreasing temperature. These results indicate that some of the problems of instability of strains producing high levels of plasmid-encoded proteins can be mitigated by growth at lower temperatures. Further, lower temperatures can increase for at least some secreted proteins both total plasmid-encoded protein formed and the fraction that is soluble.     

A continuous process to extract plasmid DNA based on alkaline lysis

Rapid advances in the fields of DNA vaccines and gene therapy have produced increased demands for large quantities of recombinant plasmid DNA. The protocol presented here extracts plasmid DNA in a scalable continuous process based on an alkaline lysis protocol. In the process, harvested bacteria are passed through two mixing chambers at controlled speeds to effect lysis and control alkalinity. The resulting solution is passed through a series of filters to remove contaminants and then ethanol precipitated. This process replaces all the centrifugation steps before obtaining crude plasmid and can be easily scaled up to meet demands for larger quantities. Using this procedure, plasmid can be extracted and purified from 4 l of Escherichia coli culture at an OD 600 nm of 50 in <90 min. The plasmid yields are approximately 80-90 mg l(-1) culture.     

Transformation of plasmid DNA into E. coli using the heat shock method

Transformation of plasmid DNA into E. coli using the heat shock method is a basic technique of molecular biology. It consists of inserting a foreign plasmid or ligation product into bacteria. This video protocol describes the traditional method of transformation using commercially available chemically competent bacteria from Genlantis. After a short incubation in ice, a mixture of chemically competent bacteria and DNA is placed at 42 degrees C for 45 seconds (heat shock) and then placed back in ice. SOC media is added and the transformed cells are incubated at 37 degrees C for 30 min with agitation. To be assured of isolating colonies irrespective of transformation efficiency, two quantities of transformed bacteria are plated. This traditional protocol can be used successfully to transform most commercially available competent bacteria. The turbocells from Genlantis can also be used in a novel 3-minute transformation protocol, described in the instruction manual.     

Affinity purification of plasmid DNA by temperature-triggered precipitation

This protocol presents a new method to purify plasmid DNA using temperature-triggered precipitation. The principle is based on the specific DNA-binding affinity of a bacterial metalloregulatory (MerR) protein to its cognate DNA sequence and the temperature responsiveness of elastin-like protein (ELP). A bifunctional ELP-MerR fusion protein is created to enable the precipitation of plasmid DNA, designed to contain the MerR recognition sequence, by a simple temperature trigger. The protocol covers all stages of the process from the design of ELP-MerR fusion proteins and MerR-binding plasmids, to the isolation of plasmid DNA from Escherichia coli cultures after boiling lysis, the subsequent temperature-triggered precipitation of plasmid DNA-fusion protein complexes and final elution of plasmid DNA by mild heating. This protocol is well suited to laboratory research-scale applications, producing plasmid DNA of better purity and similar yield as one of the most commonly used laboratory methods, standard alkaline lysis (known as the midiprep procedure). The protocol takes approximately 30 min to obtain pure plasmid DNA from cell cultures using the temperature-triggered precipitation method.     

A procedure for the preparation of bacterial DNA that employs dimethyl sulfoxide to induce the lysis of cells

A protocol for the preparation of DNA from Escherichia coli and Bacillus subtilis without the use of lysozyme as a permeabilizing agent is described. This preliminary step is carried out by treating the cells with dimethyl sulfoxide. A 5-min incubation of the cell pellet in the pure solvent, followed by the treatment with sodium dodecyl sulfate, is sufficient to induce cell lysis. The plasmid DNAs obtained by this method were equivalent in purity and quantity to the material prepared from lysozyme-digested cells and amenable to restriction and ligation. Transformation by plasmid and genomic DNAs prepared from dimethyl sulfoxide-treated cells was demonstrated.     

Altered temperature induction sensitivity of the lambda pR/cI857 system for controlled gene E expression in Escherichia coli

Cell lysis of Gram-negative bacteria can be efficiently achieved by expression of the cloned lysis gene E of bacteriophage PhiX174. Gene E expression is tightly controlled by the rightward lambda pR promoter and the temperature-sensitive repressor cI857 on lysis plasmid pAW12. The resulting empty bacterial cell envelopes, called bacterial ghosts, are currently under investigation as candidate vaccines. Expression of gene E is stringently repressed at temperatures up to 30 degrees C, whereas gene E expression, and thus cell lysis, is induced at temperatures higher than 30 degrees C due to thermal inactivation of the cI857 repressor. As a consequence, the production of ghosts requires that bacteria have to be grown at 28 degrees C before the lysis process is induced. In order to reflect the growth temperature of pathogenic bacteria in vivo, it seemed favorable to extend the heat stability of the lambda pR promoter/cI857 repressor system, allowing pathogens to grow at 37 degrees C before induction of lysis. In this study we describe a mutation in the lambda pR promoter, which allows stringent repression of gene E expression at temperatures up to 36 degrees C, but still permits induction of cell lysis at 42 degrees C.     

High-efficiency gene inactivation and replacement system for gram-positive bacteria.

A system for high-efficiency single- and double-crossover homologous integration in gram-positive bacteria has been developed, with Lactococcus lactis as a model system. The system is based on a thermosensitive broad-host-range rolling-circle plasmid, pG+host5, which contains a pBR322 replicon for propagation in Escherichia coli at 37 degrees C. A nested set of L. lactis chromosomal fragments cloned onto pG+host5 were used to show that the single-crossover integration frequency was logarithmically proportional to the length of homology for DNA fragments between 0.35 and 2.5 kb. Using random chromosomal 1-kb fragments, we showed that homologous integration can occur along the entire chromosome. We made use of the reported stimulatory effect of rolling-circle replication on intramolecular recombination to develop a protocol for gene replacement. Cultures were first maintained at 37 degrees C to select for a bacterial population enriched for plasmid integrants; activation of the integrated rolling-circle plasmid by a temperature shift to 28 degrees C resulted in efficient plasmid excision by homologous recombination and replacement of a chromosomal gene by the plasmid-carried modified copy. More than 50% of cells underwent replacement recombination when selection was applied for the replacing gene. Between 1 and 40% of cells underwent replacement recombination when no selection was applied. Chromosomal insertions and deletions were obtained in this way. These results show that gene replacement can be obtained at an extremely high efficiency by making use of the thermosensitive rolling-circle nature of the delivery vector. This procedure is applicable to numerous gram-positive bacteria.     

An automated process to extract plasmid DNA by alkaline lysis

With advances in the development of DNA vaccines and gene therapy, there is a growing need for plasmid DNA with high quality for fundamental research and clinical trials. In this report, a scalable automated process for large-scale preparation of plasmid is described. This process is based on alkaline lysis and can be easily scaled up to meet demands for larger quantities. In the process, harvested bacteria are passed through two mixing chambers at controlled speeds to affect lysis and control alkalinity. The resulting solution is passed through a series of filters to remove contaminants, and ethanol precipitated. System parameters are examined to maximize the quantity and quality of the prepared plasmid. Using this procedure, plasmid can be extracted and purified from 1 l of Escherichia coli cultures at an OD600 nm of 50 in less than 45 min. The plasmid yields are approximately 90 mg/l culture.     

Estimation of the growth rate of mixed ruminal bacteria from short-term DNA radiolabeling

A method based on 32P-labeling of DNA in short-term incubations was developed for estimating the growth rate of mixed rumen bacteria. A freeze/thaw procedure was optimized to quantitatively disrupt mixed rumen bacteria and extract bacterial DNA. The preliminary enzymatic lysis step, with lysozyme rather than proteinase K, sodium lauroyl sarcosine, and, to a lesser extent, sodium dodecyl sulfate (SDS) strongly improved cell disruption and DNA recovery rates. Sodium deoxycholate, CHAPS or Triton X-100 had no significant effect. Increasing the number of cycles or lowering the freezing temperature from -20 degrees C to -50 degrees C had no effect on DNA extraction efficiency while setting the thawing temperature at +60 degrees C rather than +37 degrees C slightly increased DNA yield but also increased its contamination with RNA. The method finally selected led to the lysis of at least 93% of cells and to the extraction of 85% of bacterial DNA. The kinetics of in vitro 32P incorporation into rumen bacteria DNA was then determined in batch incubations of strained rumen contents with no additional substrate. The curvilinear effects of the amount of 32P and the incubation time (5-15 min) on the DNA radioactivity were investigated by applying a Doehlert experimental design and fitting a second order polynomial model to data. The DNA radioactivity was linearly related to time (p<0.02) with other coefficients in the model being equal to zero (p>0.20). The incorporation of 32P into bacterial DNA was initiated approximately 70 s after the start of incubation. Taking into account the accuracy of scintillation counting, 10-15 min incubations, with 15 microCi 32P and 10 mL rumen contents per tube, appeared satisfactory for future studies.     

A set of UV-inducible autolytic vectors for high throughput screening

A high throughput screening scheme is often a prerequisite for directed evolution of enzymes or metagenomic analysis of DNA samples. For assaying intracellular enzymes of interest (e.g. when Escherichia coli is used), it requires cell lysis in many cases, chemical or enzymatic, which can be tedious and cost-consuming. In this study, a set of UV-inducible autolytic vectors was constructed to offer a simpler means of cell lysis that is free of additional liquid handling. The SRRz lysis gene cassette from bacteriophage Lambda was cloned downstream of a UV-inducible promoter, the recA promoter or the umuDC promoter, and further inserted into the backbone of pUC18, and transformed into E. coli BL21 cells. The SRRz expression and cell lysis was induced by UV irradiation. For both the recA and umuDC promoters, at 30 degrees C the lysis efficiency was found to be consistent and above 60% as measured using beta-galactosidase as the reporter. However, at 37 degrees C the lysis profiles were found to be erratic. UV lysis in 96-well plates also produced consistent lysis results that were comparable to those obtained by lysozyme treatment, demonstrating the utility of these autolytic vectors in high throughput screening. This set of artificial SRRz autolysis units should be transferable to other vectors. Surprisingly, it was found that the E. coli BL21(DE3) was also partially disrupted under UV irradiation, with a lysis efficiency of 44.5% at 30 degrees C, and 22.5% at 37 degrees C.     

A new method of plasmid DNA preparation by sucrose-mediated detergent lysis from Escherichia coli (gram-negative) and Staphylococcus aureus (gram-positive)

A simple and cheap method of plasmid DNA preparation from both gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli) organism is presented here. In this method, in place of the high-priced chemicals lysostaphin and lysozyme which are commonly used for removal of cell-wall during plasmid DNA preparation from gram-positive and gram-negative bacteria, respectively, only sucrose has been used. Firstly, bacteria is treated with Trizma (pH 8.0) containing 100% sucrose (hypertonic solution). Due to this osmotic shock, protoplasm covered by the plasma membrane of bacteria possibly shrinks and becomes detached from the cell-wall. Osmotically sensitive cells thus formed, from gram-positive (S. aureus) and gram-negative (E. coli) bacteria, are finally lysed by the lysis mixture, containing brij 58 and sodium deoxycholate. The lysate is centrifuged at 15,000 rpm for 30 min to pellet the cell debris. The supernatant containing plasmid DNA is treated with either polyethylene glycol or isopropanol. The precipitate which contains plasmid DNA is dissolved in a buffer containing Tris, EDTA, NaCl, and sodium dodecyl sulfate (pH 8.0); thus protein is denatured and removed. Finally, RNA is removed by RNase treatment. The average yield of staphylococcal plasmid DNA as well as plasmid pBR322 from E. coli HB101 in 100% sucrose-treated preparations is greater than that of lysostaphin- and lysozyme-treated preparations. This method is applicable for both large-scale and small-scale preparations. The substrate activity for restriction enzyme, cloning, transforming ability, and electron microscopic profile of the plasmid DNA prepared by this method remains unaltered.     

A facile and efficient method to achieve LacZ overproduction by the expression vector carrying the thermoregulated promoter and plasmid copy number

On the basis of the runaway-replication vector, an expression plasmid was developed to achieve tight regulation as well as high-level expression of cloned genes by thermal control of the promoter together with the plasmid copy number. To demonstrate the feasibility of this approach, the lacZ gene was fused with the heat-inducible promoter on the vector, and the result showed that protein production levels in the Escherichia coli strain harboring the recombinant plasmid could be varied in response to various degrees of heat shock. The maximal soluble LacZ ranging between 45 000 and 50 000 Miller units was obtained as the recombinant strain received a 30 --> 40 degrees C stepwise upshift, and it accounted for a 450-fold amplification over an uninduced level. Further analyses by SDS-PAGE indicated the maximal protein production (including soluble and insoluble forms) in the bacteria reaching approximately 30% total cell protein. In addition, two approaches were demonstrated to be very useful in enhancing the total soluble LacZ production on a fermenter scale. One was to shuttle the culture between two fermenters connected in series and set at different temperatures. The other resorted to the use of two-step temperature alteration in a batch fermenter, namely, raising the temperature to 40 degrees C for a certain period of time followed by reducing the temperature to 37 degrees C. Overall, it illustrates the remarkable features of the expression system with stringent regulation, high-level production capacity, facile induction, and high stability, and the usefulness of this system for recombinant protein productions is promising.     

Bacteriophage T4-related macromolecular synthesis under restriction of plasmid Rts1.

Rts1 is a plasmid which confers upon the host bacteria the capacity to restrict T4 bacteriophage growth at 32 degrees C but not at 42 degrees C. Pulse-labeling of phage-infected cells showed that Rts1 restricts the synthesis of T1 DNA. Despite efficient restriction of T4 phage growth and DNA synthesis, infected Escherichia coli 20SO harboring Rts1 synthesized both early and late T4 phage RNA. Synthesis of early T4 phage RNA under restrictive conditions (32 degrees C) was almost equal to that found under nonrestrictive conditions, and a lesser, but significant, amount of late T4 phage RNA was made in almost complete absence of T4 DNA synthesis. Moreover, very little, if any, T4 phage-coded lysozyme was detected in the infected E. coli 20SO/Rts1 at 32 degrees C, whereas normal amounts of lysozyme were present at 42 degrees C.     

Protoplast formation and regeneration of dehydrodivanillin-degrading strains of Fusobacterium varium and Enterococcus faecium

Two strains of rumen anaerobes isolated from dehydrodivanillin-degrading cultures were identified as Fusobacterium varium and Enterococcus faecium. These organisms degraded dehydrodivanillin synergistically to 5-carboxymethylvanillin and vanillic acid. Specific conditions for protoplast formation and cell wall regeneration for both bacteria were determined, under strictly anaerobic conditions, to be as follows. The cell wall of each bacterium in yeast extract medium was loosened by adding penicillin G during early log-phase growth. The cell wall of F. varium was lysed by lysozyme (1 mg/ml) in glycerol (0.2 M)-phosphate buffer (0.05 M; pH 7.0). The addition of NaCl (0.08 M) with lysozyme was necessary for lysis of E. faecium in this solution. Almost all cells were converted to protoplasts after 2 h of incubation at 37 degrees C. Regeneration of both protoplasts was 20 to 30% on an agar-containing yeast extract medium.     

An alteration in outer membrane permeability associated with a division lesion in a strain of Salmonella typhimurium.

Salmonella typhimurium strain 4a is a temperature sensitive mutant with defects in both septation and separation. The separation lesion was reversed by phenethylalcohol but this agent failed to allow septation or growth at restrictive temperature. Organisms of strain 4a grown at 42 degrees C were, unlike the parental strain, resistant to lysis by lysozyme plus EDTA and lipopolysaccharide was poorly extracted by EDTA from cultures of strain 4a grown at 42 degrees C. Such cultures may, therefore, be resistant to lysis with lysozyme plus EDTA not because the murein is altered but because the EDTA fails to permeabilize the outer membrane to lysozyme. In confirmation of this, murein isolated from strain 4a after growth at 42 degrees C showed the same sensitivity to lysozyme as murein from the parental strain. In spite of the altered envelope properties of strain 4a after growth at 42 degrees C, no major changes in protein or phospholipid composition have so far been demonstrated.