Thermodynamic study on competitive solubilization of cholesterol and beta-sitosterol in bile salt micelles

Differences in the preferential solubilization of cholesterol and competitive solubilizates (beta-sitosterol and aromatic compounds) in bile salt micelles was systematically studied by changing the molar ratio of cholesterol to competitive solubilizates. The cholesterol solubility in a mixed binary system (cholesterol and beta-sitosterol) was almost half that of the cholesterol alone system, regardless of the excess beta-sitosterol quantity added. On the other hand, the mutual solubilities of cholesterol and pyrene were not inhibited by their presence in binary mixed crystals. Finally, the cholesterol solubility was measured by changing the alkyl chain length of n-alkylbenzenes. When tetradecylbenzene was added to the bile solution, the cholesterol solubility decreased slightly and was below the original cholesterol solubility. Based on Gibbs energy change (DeltaG degrees ) for solubilization, chemicals that inhibit cholesterol solubility in their combined crystal systems showed a larger negative DeltaG degrees value than cholesterol alone.     

On protein solubility in organic solvent

Solubility of a model protein, hen egg-white lysozyme, was investigated in a wide range of neat nonaqueous solvents and binary mixtures thereof. All solvents that are protic, very hydrophilic, and polar readily dissolve more than 10 mg/mL of lysozyme (lyophilized from aqueous solution of pH 6.0). Only a marginal correlation was found between the lysozyme solubility in a non-aqueous solvent and the letter's dielectric constant or Hildebrand solubility parameter, and no correlation was observed with the dipole moment. Lysozyme dissolved in dimethyl sulfoxide (DMSO) could be precipitated by adding protein nondissolving co-solvents, although the enzyme had a tendency to form supersaturated solutions in such mixtures. The solubility of lysozyme, both in an individual solvent (1,5-pentanediol) and in binary solvent mixtures (DMSO/acetonitrile), markedly increased when the pH of the enzyme aqueous solution prior to lyophilization was moved away from the proteins's isoelectric point. (c) 1994 John Wiley & Sons, Inc.     

Potent antimalarial 4-pyridones with improved physico-chemical properties

Antimalarial 4-pyridones are a novel class of inhibitors of the plasmodial mitochondrial electron transport chain targeting Cytochrome bc1 (complex III). In general, the most potent 4-pyridones are lipophilic molecules with poor solubility in aqueous media and low oral bioavailability in pre-clinical species from the solid dosage form. The strategy of introducing polar hydroxymethyl groups has enabled us to maintain the high levels of antimalarial potency observed for other more lipophilic analogues whilst improving the solubility and the oral bioavailability in pre-clinical species.     

Physicochemical characterization and dissolution properties of nimesulide-cyclodextrin binary systems

The objective of this work is physicochemical characterization of nimesulide-cyclodextrin binary systems both in solution and solid state and to improve the dissolution properties of nimesulide (N) via complexation with α-, β, and γ-cyclodextrins (CDs). Detection of inclusion complexation was done in solution by means of phase solubility analysis, mass spectrometry, and ¹H nuclear magnetic resonance (¹H-NMR) spectroscopic studies, and in solid state using differential scanning calorimetry (DSC), powder x-ray diffractometry (X-RD), scanning electron microscopy (SEM), and in vitro dissolution studies. Phase solubility, mass spectrometry and ¹H-NMR studies in solution revealed 1∶1 M complexation of N with all CDs. A true inclusion of N with β-CD at 1∶2 M in solid state was confirmed by DSC, powder X-RD and SEM studies. Dissolution properties of N-CD binary systems were superior when compared to pure N.     

Phase behaviour of stearic acid-stearonitrile mixtures. A thermodynamic study in bulk and at the air-water interface

The solid-liquid phase behaviour of stearic acid (SA) and stearonitrile (SN) in binary mixtures was investigated by differential scanning calorimetry (DSC), and the formation of SA-SN mixed monolayers at the air-water interface was followed by surface pressure-area (pi-A) measurements and by Brewster angle microscope (BAM) observation. The solid-liquid phase diagram is a eutectic type phase diagram, with the eutectic composition 0.90相似文献   

Co-solubility of saturated cholesteryl esters: a comparison of calculated and experimental binary phase diagrams

Based on ideal solution theory, phase diagrams are calculated for binary compositions of cholesteryl esters and compared to experimental data from pairwise combinations in a saturated acyl chain series from caprylate to arachidate, which encompasses three crystal packing motifs in the solid state. Within a crystal structure class, nearly ideal co-solubility is found for binary solids, where the acyl chain lengths of the pure components differ by one methylene group. Beyond this chain length difference, nonideal solutions occur until fractionation occurs at e.g., six methylene unit increments between the components. The observed liquidus lines of the eutectic are near the theoretical curves when the combinations of two compounds packing in the same crystal structure fractionate. Fractionation also is found when liquids composed of two esters which favor different crystal structures are solidified from the melt, no matter what the chain length difference is; the liquidus curves for re-heated solids, however, are not necessarily predicted by the Schr?der equation. In general, co-miscibility can be found in mesophases formed from compounds with two different crystal structures.     

Evaluation of Drug Load and Polymer by Using a 96-Well Plate Vacuum Dry System for Amorphous Solid Dispersion Drug Delivery

It is well recognized that poor dissolution rate and solubility of drug candidates are key limiting factors for oral bioavailability. While numerous technologies have been developed to enhance solubility of the drug candidates, poor water solubility continuously remains a challenge for drug delivery. Among those technologies, amorphous solid dispersions (SD) have been successfully employed to enhance both dissolution rate and solubility of poorly water-soluble drugs. This research reports a high-throughput screening technology developed by utilizing a 96-well plate system to identify optimal drug load and polymer using a solvent casting approach. A minimal amount of drug was required to evaluate optimal drug load in three different polymers with respect to solubility improvement and solid-state stability of the amorphous drug-polymer system. Validation of this method was demonstrated with three marketed drugs as well as with one internal compound. Scale up of the internal compound SD by spray drying further confirmed the validity of this method, and its quality was comparable to a larger scale process. Here, we demonstrate that our system is highly efficient, cost-effective, and robust to evaluate the feasibility of spray drying technology to produce amorphous solid dispersions.     

Synthesis and solubility properties of peptide fragments of human hemoglobin alpha-chain (123-136)

The solubility prediction method for protected peptides was successfully applied to relatively small peptide fragments of human hemoglobin alpha-chain (123-136) which contained various polar amino acid residues such as Asp(OBzl), Glu(OBzl), Lys(Z), Ser(Bzl), and Thr(Bzl). As reported previously for hydrophobic peptides and human proinsulin C-peptide fragments, solubility data indicated that the insolubility of protected peptides having a mean value of Pc value below 0.90 appeared to begin at the octa- or nonapeptide sequence level and that beta-sheet structure played an important role in the insolubility of peptides. When a peptide has a beta-sheet structure in the solid state, we can clearly determine the critical chain length for peptide insolubility, the solubility dependence on solvent properties, and the solubility independence of amino acid compositions of peptides.     

Solid-liquid phase behavior of binary fatty acid mixtures. 2. Mixtures of oleic acid with lauric acid, myristic acid, and palmitic acid

Solid-liquid phase behavior was investigated for binary fatty acid mixtures composed of oleic acid (OA; cis-9-octadecenoic acid) and saturated fatty acids, lauric acid (LA; dodecanoic acid), myristic acid (MA; tetradecanoic acid), and palmitic acid (PA; hexadecanoic acid), by means of differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FT-IR). When the mixture was heated immediately after the solidification from the melt, the heat effect due to the gamma-to-alpha transformation of OA varied depending on the composition of the mixture. However, the mixture subjected to an annealing at the temperature slightly below the melting temperature provided the transformation at constant temperature which corresponds to the gamma-to-alpha transformation temperature of pure OA. This suggests that a solid phase formed by cooling of the melt of the mixture is not in an equilibrium state, but it relaxes to a stable solid during the annealing process. The T-X phase diagrams of these mixtures constructed from the DSC measurements demonstrate that the two fatty acid species are completely immiscible in a solid phase regardless of the type of polymorphs of OA, alpha- or gamma-form. According to a thermodynamic analysis of liquidus line basing on the regular solution model for the melt, the non-ideality of mixing tends to increase with the decrease in the acyl chain length of the saturated fatty acid, although the mixing is rather close to ideal.     

Binary and ternary inclusion complexes of finasteride in HPβCD and polymers: Preparation and characterization

The aim of this study was to determine whether inclusion complexes between 2-hydroxypropyl-β-cyclodextrin (HPβCD) and finasteride (FIN) are formed, and to characterize these. Equimolar FIN/HPβCD solid systems in the presence or absence of 0.1% (w/v) of polyvinylpyrrolidone K30 (PVP K30) or 0.3% of chitosan were prepared by coevaporation and freeze-drying methods. The systems were characterized by phase solubility, NMR, DSC, and XRD analysis. The results suggest that true binary and ternary inclusion complexes were formed.     

Relationship between preferential interaction of a protein in an aqueous mixed solvent and its solubility

The present paper is devoted to the derivation of a relation between the preferential solvation of a protein in a binary aqueous solution and its solubility. The preferential binding parameter, which is a measure of the preferential solvation (or preferential hydration) is expressed in terms of the derivative of the protein activity coefficient with respect to the water mole fraction, the partial molar volume of protein at infinite dilution and some characteristics of the protein-free mixed solvent. This expression is used as the starting point in the derivation of a relationship between the preferential binding parameter and the solubility of a protein in a binary aqueous solution. The obtained expression is used in two different ways: (1) to produce a simple criterion for the salting-in or salting-out by various cosolvents on the protein solubility in water, (2) to derive equations which predict the solubility of a protein in a binary aqueous solution in terms of the preferential binding parameter. The solubilities of lysozyme in aqueous sodium chloride solutions (pH=4.5 and 7.0), in aqueous sodium acetate (pH=8.3) and in aqueous magnesium chloride (pH=4.1) solutions are predicted in terms of the preferential binding parameter without any adjustable parameter. The results are compared with experiment, and for aqueous sodium chloride mixtures the agreement is excellent, for aqueous sodium acetate and magnesium chloride mixtures the agreement is only satisfactory.     

Solubility relationships in binary mixtures of hemoglobin variants: Application to the “gelationrd of sickle-cell hemoglobin

A thermodynamic treatment of solubility in binary mixtures of hemoglobin variants is presented. It is shown that the reported dependence of the minimum gelling concentration in five binary mixtures of the variants S, C_Harlem' Korle-Bu and A may be satisfactorily accounted for using the derived solubility relations together with simple models relating structure to interaction energies in the condensed phase.     

A correlation between lipid domain shape and binary phospholipid mixture composition in free standing bilayers: A two-photon fluorescence microscopy study

Giant unilamellar vesicles (GUVs) composed of different phospholipid binary mixtures were studied at different temperatures, by a method combining the sectioning capability of the two-photon excitation fluorescence microscope and the partition and spectral properties of 6-dodecanoyl-2-dimethylamino-naphthalene (Laurdan) and Lissamine rhodamine B 1,2-dihexadecanoyl-sn-glycero-3-phosphoethanolamine (N-Rh-DPPE). We analyzed and compared fluorescence images of GUVs composed of 1,2-dilauroyl-sn-glycero-3-phosphocholine/1, 2-dipalmitoyl-sn-glycero-3-phosphocholine (DLPC/DPPC), 1, 2-dilauroyl-sn-glycero-3-phosphocholine/1, 2-distearoyl-sn-glycero-3-phosphocholine (DLPC/DSPC), 1, 2-dilauroyl-sn-glycero-3-phosphocholine/1, 2-diarachidoyl-sn-glycero-3-phosphocholine (DLPC/DAPC), 1, 2-dimyristoyl-sn-glycero-3-phosphocholine/1, 2-distearoyl-sn-glycero-3-phosphocholine (DMPC/DSPC) (1:1 mol/mol in all cases), and 1,2-dimyristoyl-sn-glycero-3-phosphoethanolamine/1, 2-dimyristoyl-sn-glycero-3-phosphocholine (DMPE/DMPC) (7:3 mol/mol) at temperatures corresponding to the fluid phase and the fluid-solid phase coexistence. In addition, we studied the solid-solid temperature regime for the DMPC/DSPC and DMPE/DMPC mixtures. From the Laurdan intensity images the generalized polarization function (GP) was calculated at different temperatures to characterize the phase state of the lipid domains. We found a homogeneous fluorescence distribution in the GUV images at temperatures corresponding to the fluid region for all of the lipid mixtures. At temperatures corresponding to phase coexistence we observed concurrent fluid and solid domains in the GUVs independent of the lipid mixture. In all cases the lipid solid domains expanded and migrated around the vesicle surface as we decreased the temperature. The migration of the solid domains decreased dramatically at temperatures close to the solid-fluid-->solid phase transition. For the DLPC-containing mixtures, the solid domains showed line, quasicircular, and dendritic shapes as the difference in the hydrophobic chain length between the components of the binary mixture increases. In addition, for the saturated PC-containing mixtures, we found a linear relationship between the GP values for the fluid and solid domains and the difference between the hydrophobic chain length of the binary mixture components. Specifically, at the phase coexistence temperature region the difference in the GP values, associated with the fluid and solid domains, increases as the difference in the chain length of the binary mixture component increases. This last finding suggests that in the solid-phase domains, the local concentration of the low melting temperature phospholipid component increases as the hydrophobic mismatch decreases. At the phase coexistence temperature regime and based on the Laurdan GP data, we observe that when the hydrophobic mismatch is 8 (DLPC/DAPC), the concentration of the low melting temperature phospholipid component in the solid domains is negligible. This last observation extends to the saturated PE/PC mixtures at the phase coexistence temperature range. For the DMPC/DSPC we found that the nonfluorescent solid regions gradually disappear in the solid temperature regime of the phase diagram, suggesting lipid miscibility. This last result is in contrast with that found for DMPE/DMPC mixtures, where the solid domains remain on the GUV surface at temperatures corresponding to that of the solid region. In all cases the solid domains span the inner and outer leaflets of the membrane, suggesting a strong coupling between the inner and outer monolayers of the lipid membrane. This last finding extends previous observations of GUVs composed of DPPE/DPPC and DLPC/DPPC mixtures (, Biophys. J. 78:290-305).     

In silico screening of dicarboxylic acids for cocrystallization with phenylpiperazine derivatives based on both cocrystallization propensity and solubility advantage

In silico screening was performed to search for binary solids in which a phenylpiperazine-derivative drug was cocrystallized with a dicarboxylic acid. The phenylpiperazine derivative could be any of 61 such drugs, while the dicarboxylic acid could be any of nine such acids. The uniqueness of this approach was that two criteria had to be fulfilled simultaneously, namely a high propensity for cocrystallization and a sufficient solubility advantage. Using the mixing enthalpies of selected pairs of crystal formers with high affinities for one another permitted the classification of candidates with a high probability of cocrystallization. Further modeling of the solubility advantage allowed the identification of many binary solids that potentially exhibit significantly enhanced solubility in water. Based on the computed values for the mixing enthalpies and solubility advantage factors, it was concluded that dicarboxylic acids are both excellent coformers for cocrystallization with phenylpiperazines and very good solubility enhancers; indeed, the use of dicarboxylic acids as coformers would allow the degree of dissolution to be tuned for many of the studied drugs. The observed similarities of the cocrystallization landscapes of the studied drugs and excipients were also explored.     

Imidacloprid and Related Compounds: Structure and Water Solubility of N-Alkyl Derivatives of Imidacloprid

An intramolecular hydrogen bond between NH???O₂N in insecticide, imidacloprid (1), and its nitromethylene analog 15 was proved by NMR and IR spectra. That electron delocalization over their planar moieties was disrupted by alkylation at the imidazolidine nitrogen atom is demonstrated by the hypsochromic shifts in UV and deshielding effect in NMR spectra. Interestingly, the N-alkyl derivatives (C1-5) had greater water solubility than 1, although increasing alkyl chain length decreased the solubility. The hydrophilicity of the alkyl derivatives would result from remote charge heads being formed as a result of the conjugation disruption by alkylation, while the hydrophobicity of 1 could be ascribed to the charge distribution over the conjugated system coupled with the intramolecular H-bonding. The greater water solubility of 15 than 1 and contrastively small solubility of the cyanoimine analogue are discussed based on the difference in their steric crowding.     

Preformulation Study of the Inclusion Complex Irbesartan-β-Cyclodextrin

The aim of the present work was to improve the solubility and dissolution profile of Irbesartan (IRB), a poorly water-soluble drug by formation of inclusion complex with β-cyclodextrin (βCD). Phase solubility studies revealed increase in solubility of the drug upon cyclodextrin addition, showing A_L—type of graph with slope less than one indicating formation of 1:1 stoichiometry inclusion complex. The stability constant (K _s) was found to be 104.39 M⁻¹. IRB–βCD binary systems were prepared by cogrinding, kneading using alcohol, kneading using aqueous alcohol, and coevaporation methods. Characterization of the binary systems were carried out by differential scanning calorimetry, Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray diffraction, and proton nuclear magnetic resonance. The dissolution profiles of inclusion complexes were determined and compared with those of IRB alone and physical mixture. Among the various methods, coevaporation was the best in which the solubility was increased and dissolution rate of the drug was the highest. The study indicated the usefulness of cyclodextrin technology to overcome the solubility problem of IRB.     

Diclofenac-β-cyclodextrin binary systems: Physicochemical characterization and in vitro dissolution and diffusion studies

The aim of this work was to study the influence of β-cyclodextrin (β-CD) on the biopharmaceutic properties of diclofenac (DCF). To this purpose the physicochemical characterization of diclofenac-β-cyclodextrin binary systems was performed both in solution and solid state. Solid phase characterization was performed using differential scanning calorimetry (DSC), powder x-ray diffractometry (XRD), and Fourier transform infrared spectroscopy (FTIR). Phase solubility analyses, and in vitro permeation experiments through a synthetic membrane were performed in solution. Moreover, DCF/β-CD interactions were studied in DMSO by¹H nuclear magnetic resonance (NMR) spectroscopy. The effects of different preparation methods and drug-to-β-CD molar ratios were also evaluated. Phase solubility studies revealed 1∶1 M complexation of DCF when the freeze-drying method was used for the preparation of the binary system. The true inclusion for the freeze-dried binary system was confirmed by¹H NMR spectroscopy, DSC, powder XRD, and IR studies. The dissolution study revealed that the drug dissolution rate was improved by the presence of CDs and the highest and promptest release was obtained with the freeze-dried binary system. Diffusion experiments through a silicone membrane showed that DCF diffusion was higher from the saturated drug solution (control) than the freeze-dried inclusion complexes, prepared using different DCF-β-CD molar ratios. However, the presence of the inclusion complex was able to stabilize the system giving rise to a more regular diffusion profile. Published: October 22, 2005     

Effect of Auxiliary Substances on Complexation Efficiency and Intrinsic Dissolution Rate of Gemfibrozil–β-CD Complexes

The studies reported in this work are aimed to elucidate the ternary inclusion complex formation of gemfibrozil (GFZ), a poorly water-soluble drug, with β-cyclodextrin (β-CD) with the aid of auxiliary substances like different grades of povidone(s) (viz. PVP K-29/32, PVP K-40, Plasdone S-630, and Polyplasdone XL), organic base (viz. triethanolamine), and metal ion (viz. MgCl₂·6H₂O), by investigating their interactions in solution and solid state. Phase solubility studies were carried out to evaluate the solubilizing power of β-cyclodextrin, in association with various auxiliary substances, to determine the apparent stability constant (K _C) and complexation efficiency (CE) of complexes. Improvement in K _C values for ternary complexes clearly proves the benefit of the addition of auxiliary substances to promote CE. Of all the approaches used, the use of polymer Plasdone S-630 was found to be the most promising approach in terms of optimum CE and K _C. GFZ–β-CD (1:1) binary and ternary systems were prepared by kneading and lyophilization methods. The ternary systems clearly signified superiority over binary systems in terms of CE, solubility, K _C, and reduction in the formulation bulk. Optimized ternary system of GFZ–β-CD–Plasdone S-630 prepared by using lyophilization method indicated a significant improvement in intrinsic dissolution rate when compared with ternary kneaded system. Differential scanning calorimetry, X-ray diffraction, Fourier transform infrared, scanning electron microscopy, and proton nuclear magnetic resonance were carried out to characterize the binary and optimized ternary complex. The results suggested the formation of new solid phases, eliciting strong evidences of ternary inclusion complex formation between GFZ, β-CD, and Plasdone S-630, particularly for lyophilized products.     

A transport kinetic concept of ion uptake from soil by plants

Summary A suction filter method is described, that allows soil solution to be isolated from soils with varying moisture content and with plant-cover without disturbance of actively growing plant roots. The reproducibility of the method was confirmed by the fact that the relative standard deviations of cation and anion concentrations in isolated soil solutions were of the same order of magnitude as those of corresponding chemical analyses. Evidence for soil solution remaining unchanged by the described isolation procedure was furnished by the close agreement between the thermodynamic solubility product and the calculated solubility product of dehydrated calcium sulphate in soil solution, based on estimated Ca²⁺ and SO ₂₋ ⁴ concentrations in isolated soil solution and corresponding activity coefficients. The uses of the method in connection with studies in plant nutrition are discussed.     

Improved Aqueous Solubility and Antihypercholesterolemic Activity of Ezetimibe on Formulating with Hydroxypropyl-β-Cyclodextrin and Hydrophilic Auxiliary Substances

The purpose of this study was to improve the aqueous solubility, dissolution, and pharmacodynamic properties of a BCS class II drug, ezetimibe (Eze) by preparing ternary cyclodextrin complex systems. We investigated the potential synergistic effect of two novel hydrophilic auxiliary substances, d-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) and l-ascorbic acid-2-glucoside (AA2G) on hydroxypropyl-β-cyclodextrin (HPBCD) solubilization of poorly water-soluble hypocholesterolemic drug, Eze. In solution state, the binary and ternary systems were analyzed by phase solubility studies and Job’s plot. The solid complexes prepared by freeze-drying were characterized by Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), powder X-ray diffraction (XRD), nuclear magnetic resonance (NMR), and scanning electron microscopy (SEM). The log P values, aqueous solubility, dissolution, and antihypercholesterolemic activity of all systems were studied. The analytical techniques confirmed the formation of inclusion complexes in the binary and ternary systems. HPBCD complexation significantly (p?<?0.05) reduced the log P and improved the solubility, dissolution, and hypocholesterolemic properties of Eze, and the addition of ternary component produced further significant improvement (p?<?0.05) even compared to binary system. The remarkable reduction in log P and enhancement in solubility, dissolution, and antihypercholesterolemic activity due to the addition of TPGS or AA2G may be attributed to enhanced wetting, dispersibility, and complete amorphization. The use of TPGS or AA2G as ternary hydrophilic auxiliary substances improved the HPBCD solubilization and antihypercholesterolemic activity of Eze.