Comparison of S-layer secretion genes in freshwater caulobacters

Our freshwater caulobacter collection contains about 40 strains that are morphologically similar to Caulobacter crescentus. All elaborate a crystalline protein surface (S) layer made up of protein monomers 100-193 kDa in size. We conducted a comparative study of S-layer secretion in 6 strains representing 3 size groups of S-layer proteins: small (100-108 kDa), medium (122-151 kDa), and large (181-193 kDa). All contained genes predicted to encode ATP-binding cassette transporters and membrane fusion proteins highly similar to those of C. crescentus, indicating that the S-layer proteins were all secreted by a type I system. The S-layer proteins' C-termini showed unexpectedly low sequence similarity but contained conserved residues and predicted secondary structure features typical of type I secretion signals. Cross-expression studies showed that the 6 strains recognized secretion signals from C. crescentus and Pseudomonas aeruginosa and similarly that C. crescentus was able to secrete the S-layer protein C-terminus of 1 strain examined. Inactivation of the ATP-binding cassette transporter abolished S-layer protein secretion, indicating that the type I transporter is necessary for S-layer protein secretion. Finally, while all of the S-layer proteins of this subset of strains were secreted by type I mechanisms, there were significant differences in genome positions of the transporter genes that correlated with S-layer protein size.     

Recombinant infectious hematopoietic necrosis virus and viral hemorrhagic septicemia virus glycoprotein epitopes expressed in Aeromonas salmonicida induce protective immunity in rainbow trout (Oncorhynchus mykiss).

Fragments of the glycoprotein genes of viral hemorrhagic septicemia virus (VHSV) and infectious hematopoietic necrosis virus (IHNV) were cloned into a bacterial broad-host-range expression vector under the control of the plac promoter. Western blot (immunoblot) analysis with monoclonal antibodies specific to the glycoproteins demonstrated the inducible expression of the fusion proteins in Escherichia coli. Aeromonas salmonicida is the causative agent of furunculosis in salmonid fish. It was confirmed that an avirulent strain of A. salmonicida, A440, which contains a deletion in the structural gene for the paracrystalline surface protein array, will provide protective immunity against furunculosis when used as a live attenuated vaccine. The plasmid-encoded viral epitopes were then mobilized into A440 for use as a shuttle system for the expression of fragments of the glycoprotein genes of IHNV and VHSV. Vaccination of rainbow trout with A440 containing the viral epitopes resulted in the development of protective immunity against both VHSV and IHNV. This indicates that the use of cloned fragments of the glycoproteins and the use of A. salmonicida as a shuttle system constitute a feasible approach to fish vaccine development.     

Nucleotide sequence analysis of the gene encoding the Caulobacter crescentus paracrystalline surface layer protein.

The entire nucleotide sequence of the rsaA gene, encoding the paracrystalline surface (S) layer protein (RsaA) of Caulobacter crescentus CB15A, was determined. The rsaA gene encoded a protein of 1026 amino acids, with a predicted molecular weight of 98,132. Protease cleavage of mature RsaA protein and amino acid sequencing of retrievable peptides yielded two peptides: one aligned with a region approximately two-thirds the way into the predicted amino acid sequence and the second peptide corresponded to the predicted carboxy terminus. Thus, no cleavage processing of the carboxy portion of the RsaA protein occurred during export, and with the exception of the removal of the initial methionine residue, the protein was not processed by cleavage to produce the mature protein. The predicted RsaA amino acid profile was unusual, with small neutral residues predominating. Excepting aspartate, charged amino acids were in relatively low proportion, resulting in an especially acidic protein, with a predicted pI of 3.46. As with most other sequenced S-layer proteins, RsaA contained no cysteine residues. A homology scan of the Swiss Protein Bank 17 produced no close matches to the predicted RsaA sequence. However, RsaA protein shared measurable homology with some exported proteins of other bacteria, including the hemolysins. Of particular interest was a specific region of the RsaA protein that was homologous to the repeat regions of glycine and aspartate residues found in several proteases and hemolysins. These repeats are implicated in the binding of calcium for proper structure and biological activity of these proteins. Those present in the RsaA protein may perform a similar function, since S-layer assembly and surface attachment requires calcium. RsaA protein also shared some homology with 10 other S-layer proteins, with the Campylobacter fetus S-layer protein scoring highest.     

Secretion of the Caulobacter crescentus S-layer protein: further localization of the C-terminal secretion signal and its use for secretion of recombinant proteins

The secretion signal of the Caulobacter crescentus S-layer protein (RsaA) was localized to the C-terminal 82 amino acids of the molecule. Protein yield studies showed that 336 or 242 C-terminal residues of RsaA mediated secretion of >50 mg of a cellulase passenger protein per liter to the culture fluids.     

Bacterially expressed nucleoprotein of infectious hematopoietic necrosis virus augments protective immunity induced by the glycoprotein vaccine in fish.

The ribonucleoprotein gene of infectious hematopoietic necrosis virus (IHNV) has been expressed in Escherichia coli as a trpE fusion protein. This viral protein does not induce protective immunity to lethal IHNV infection in fish, and virus-neutralizing antibodies do not react with this viral protein. However, when it was administered with a bacterial lysate containing a region of the IHNV glycoprotein, there was enhanced resistance in immunized fish to lethal virus infection.     

Generation of a functional monomolecular protein lattice consisting of an s-layer fusion protein comprising the variable domain of a camel heavy chain antibody

Crystalline bacterial cell surface layer (S-layer) proteins are composed of a single protein or glycoprotein species. Isolated S-layer subunits frequently recrystallize into monomolecular protein lattices on various types of solid supports. For generating a functional protein lattice, a chimeric protein was constructed, which comprised the secondary cell wall polymer-binding region and the self-assembly domain of the S-layer protein SbpA from Bacillus sphaericus CCM 2177, and a single variable region of a heavy chain camel antibody (cAb-Lys3) recognizing lysozyme as antigen. For construction of the S-layer fusion protein, the 3'-end of the sequence encoding the C-terminally truncated form rSbpA(31)(-)(1068) was fused via a short linker to the 5'-end of the sequence encoding cAb-Lys3. The functionality of the fused cAb-Lys3 in the S-layer fusion protein was proved by surface plasmon resonance measurements. Dot blot assays revealed that the accessibility of the fused functional sequence for the antigen was independent of the use of soluble or assembled S-layer fusion protein. Recrystallization of the S-layer fusion protein into the square lattice structure was observed on peptidoglycan-containing sacculi of B. sphaericus CCM 2177, on polystyrene or on gold chips precoated with thiolated secondary cell wall polymer, which is the natural anchoring molecule for the S-layer protein in the bacterial cell wall. Thereby, the fused cAb-Lys3 remained located on the outer S-layer surface and accessible for lysozyme binding. Together with solid supports precoated with secondary cell wall polymers, S-layer fusion proteins comprising rSbpA(31)(-)(1068) and cAbs directed against various antigens shall be exploited for building up monomolecular functional protein lattices as required for applications in nanobiotechnology.     

Heterologous exchanges of the glycoprotein and the matrix protein in a Novirhabdovirus

Infectious hematopoietic necrosis virus (IHNV) and viral hemorrhagic septicemia virus (VHSV) are two salmonid rhabdoviruses replicating at low temperatures (14 to 20 degrees C). Both viruses belong to the Novirhabdovirus genus, but they are only distantly related and do not cross antigenically. By using a recently developed reverse-genetic system based on IHNV (S. Biacchesi et al., J. Virol. 74:11247-11253, 2000), we investigated the ability to exchange IHNV glycoprotein G with that of VHSV. Thus, the IHNV genome was modified so that the VHSV G gene replaced the complete IHNV G gene. A recombinant virus expressing VHSV G instead of IHNV G, rIHNV-Gvhsv, was generated and was shown to replicate as well as the wild-type rIHNV in cell culture. This study was extended by exchanging IHNV G with that of a fish vesiculovirus able to replicate at high temperatures (up to 28 degrees C), the spring viremia of carp virus (SVCV). rIHNV-Gsvcv was successfully recovered; however, its growth was restricted to 14 to 20 degrees C. These results show the nonspecific sequence requirement for the insertion of heterologous glycoproteins into IHNV virions and also demonstrate that an IHNV protein other than the G protein is responsible for the low-temperature restriction on growth. To determine to what extent the matrix (M) protein interacts with G, a series of chimeric pIHNV constructs in which all or part of the M gene was replaced with the VHSV counterpart was engineered and used to recover the respective recombinant viruses. Despite the very low percentage (38%) of amino acid identity between the IHNV and VHSV matrix proteins, viable chimeric IHNVs, harboring either the matrix protein or both the glycoprotein and the matrix protein from VHSV, were recovered and propagated. Altogether, these data show the extreme flexibility of IHNV to accommodate heterologous structural proteins.     

Isolation of two physiologically induced variant strains of Bacillus stearothermophilus NRS 2004/3a and characterization of their S-layer lattices.

During growth of Bacillus stearothermophilus NRS 2004/3a in continuous culture on complex medium, the chemical properties of the S-layer glycoprotein and the characteristic oblique lattice were maintained only if glucose was used as the sole carbon source. With increased aeration, amino acids were also metabolized, accompanied by liberation of ammonium and by changes in the S-layer protein. Depending on the stage of fermentation at which oxygen limitation was relieved, two different variants, one with a more delicate oblique S-layer lattice (variant 3a/V1) and one with a square S-layer lattice (variant 3a/V2), were isolated. During the switch from the wild-type strain to a variant or from variant 3a/V2 to variant 3a/V1, monolayers of two types of S-layer lattices could be demonstrated on the surfaces of single cells. S-layer proteins from variants had different molecular sizes and a significantly lower carbohydrate content than S-layer proteins from the wild-type strain did. Although the S-layer lattices from the wild-type and variant strains showed quite different protein mass distributions in two- and three-dimensional reconstructions, neither the amino acid composition nor the pore size, as determined by permeability studies, was significantly changed. Peptide mapping and N-terminal sequencing results strongly indicated that the three S-layer proteins are encoded by different genes and are not derived from a universal precursor form.     

Evaluating secretion and surface attachment of SapA, an S-layer-associated metalloprotease of Caulobacter crescentus

Caulobacter crescentus is used to display foreign peptides at high density as insertions into the surface (S)-layer protein (RsaA). Many recombinant RsaA proteins, however, are cleaved by SapA, a 71-kDa metalloprotease, suggesting a role in maintaining S-layer integrity. When overexpressed on a multicopy plasmid SapA was detected on the surface by fluorescent antibody only if RsaA and the O-side chain of LPS that mediates S-layer attachment were removed by mutation, indicating an outer membrane location beneath the S-layer. Secretion was mediated by the RsaA type 1 transporter since secretion was eliminated in transporter deficient strains or by C-terminal deletions in SapA (the presumed location of type 1 secretion signals). Secretion was required to become an active protease; mass spectrometry suggested this might be due to N-terminal processing during secretion, a feature shared with other type 1-secreted proteases. Overexpression leads to additional processing C-terminal to the protease domain, producing a 45-kDa protein. This was demonstrated to be self-processing. Deletion analysis revealed the C-terminal 100 amino acids were sufficient for anchoring and secretion. When protein G was fused to the last 238 amino acids of SapA it was secreted, surface attached and bound immunoglobulin, indicating potential for foreign protein display.     

Evaluation of the protective immunogenicity of the N, P, M, NV and G proteins of infectious hematopoietic necrosis virus in rainbow trout oncorhynchus mykiss using DNA vaccines.

The protective immunogenicity of the nucleoprotein (N), phosphoprotein (P), matrix protein (M), non-virion protein (NV) and glycoprotein (G) of the rhabdovirus infectious hematopoietic necrosis virus (IHNV) was assessed in rainbow trout using DNA vaccine technology. DNA vaccines were produced by amplifying and cloning the viral genes in the plasmid pCDNA 3.1. The protective immunity elicited by each vaccine was evaluated through survival of immunized fry after challenge with live virus. Neutralizing antibody titers were also determined in vaccinated rainbow trout Oncorhynchus mykiss fry (mean weight 2 g) and 150 g sockeye salmon Oncorhynchus nerka. The serum from the 150 g fish was also used in passive immunization studies with naive fry. Our results showed that neither the internal structural proteins (N, P and M) nor the NV protein of IHNV induced protective immunity in fry or neutralizing antibodies in fry and 150 g fish when expressed by a DNA vaccine construct. The G protein, however, did confer significant protection in fry up to 80 d post-immunization and induced protective neutralizing antibodies. We are currently investigating the role of different arms of the fish immune system that contribute to the high level of protection against IHNV seen in vaccinated fish.     

Primary structure and glycosylation of the S-layer protein of Haloferax volcanii.

The outer surface of the archaebacterium Haloferax volcanii (formerly named Halobacterium volcanii) is covered with a hexagonally packed surface (S) layer. The gene coding for the S-layer protein was cloned and sequenced. The mature polypeptide is composed of 794 amino acids and is preceded by a typical signal sequence of 34 amino acid residues. A highly hydrophobic stretch of 20 amino acids at the C-terminal end probably serves as a transmembrane domain. Clusters of threonine residues are located adjacent to this membrane anchor. The S-layer protein is a glycoprotein containing both N- and O-glycosidic bonds. Glucosyl-(1----2)-galactose disaccharides are linked to threonine residues. The primary structure and the glycosylation pattern of the S-layer glycoproteins from Haloferax volcanii and from Halobacterium halobium were compared and found to exhibit distinct differences, despite the fact that three-dimensional reconstructions from electron micrographs revealed no structural differences at least to the 2.5-nm level attained so far (M. Kessel, I. Wildhaber, S. Cohe, and W. Baumeister, EMBO J. 7:1549-1554, 1988).     

S-layer anchoring and localization of an S-layer-associated protease in Caulobacter crescentus

The S-layer of the gram-negative bacterium Caulobacter crescentus is composed of a single protein, RsaA, that is secreted and assembled into a hexagonal crystalline array that covers the organism. Despite the widespread occurrence of comparable bacterial S-layers, little is known about S-layer attachment to cell surfaces, especially for gram-negative organisms. Having preliminary indications that the N terminus of RsaA anchors the monomer to the cell surface, we developed an assay to distinguish direct surface attachment from subunit-subunit interactions where small RsaA fragments are incubated with S-layer-negative cells to assess the ability of the fragments to reattach. In doing so, we found that the RsaA anchoring region lies in the first approximately 225 amino acids and that this RsaA anchoring region requires a smooth lipopolysaccharide species found in the outer membrane. By making mutations at six semirandom sites, we learned that relatively minor perturbations within the first approximately 225 amino acids of RsaA caused loss of anchoring. In other studies, we confirmed that only this N-terminal region has a direct role in S-layer anchoring. As a by-product of the anchoring studies, we discovered that Sap, the C. crescentus S-layer-associated protease, recognized a cleavage site in the truncated RsaA fragments that is not detected by Sap in full-length RsaA. This, in turn, led to the discovery that Sap was an extracellular membrane-bound protease, rather than intracellular, as previously proposed. Moreover, Sap was secreted to the cell surface primarily by the S-layer type I secretion apparatus.     

Cell surface display of chimeric glycoproteins via the S-layer of Paenibacillus alvei

The Gram-positive, mesophilic bacterium Paenibacillus alvei CCM 2051^T possesses a two-dimensional crystalline protein surface layer (S-layer) with oblique lattice symmetry composed of a single type of O-glycoprotein species. Herein, we describe a strategy for nanopatterned in vivo cell surface co-display of peptide and glycan epitopes based on this S-layer glycoprotein self-assembly system. The open reading frame of the corresponding structural gene spaA codes for a protein of 983 amino acids, including a signal peptide of 24 amino acids. The mature S-layer protein has a theoretical molecular mass of 105.95 kDa and a calculated pI of 5.83. It contains three S-layer homology domains at the N-terminus that are involved in anchoring of the glycoprotein via a non-classical, pyruvylated secondary cell wall polymer to the peptidoglycan layer of the cell wall. For this polymer, several putative biosynthesis enzymes were identified upstream of the spaA gene. For in vivo cell surface display, the hexahistidine tag and the enhanced green fluorescent protein, respectively, were translationally fused to the C-terminus of SpaA. Immunoblot analysis, immunofluorescence staining, and fluorescence microscopy revealed that the fused epitopes were efficiently expressed and successfully displayed via the S-layer glycoprotein matrix on the surface of P. alvei CCM 2051^T cells. In contrast, exclusively non-glycosylated chimeric SpaA proteins were displayed, when the S-layer of the glycosylation-deficient wsfP mutant was used as a display matrix.     

Development of a suicidal DNA vaccine for infectious hematopoietic necrosis virus (IHNV)

We developed a suicidal DNA vaccine (pIRF1A-G-pMT-M) for salmonid fish susceptible to Infectious Hematopoietic Necrosis Virus (IHNV). The suicidal vaccine consists of two operons: i) an inducible fish promoter, the interferon regulatory factor 1A promoter (pIRF1A), driving the expression of the IHNV viral glycoprotein (G) gene that induces protection, and ii) a ZnCl(2) inducible fish promoter, the metallothionein promoter (pMT), driving the expression of the IHNV matrix (M) protein that induces apoptosis. The vaccine induces an immune response to the G protein and then induces the cell to undergo apoptosis to eliminate the DNA vaccine-containing cell. Also developed is another suicidal construct (pCMV-luc-pMT-M) for monitoring the persistence of luciferase (luc) expression after induction of apoptosis. In this study, we evaluated the inducibility of the MT promoter with ZnCl(2) and the capacity of cells transfected with the suicidal vector pCMV-luc-pMT-M to undergo apoptosis after ZnCl(2) addition. We also demonstrated the protective immunity elicited by the suicidal DNA vaccine pIRF1A-G-pMT-M, the survival of fish after treatment with ZnCl(2), and the elimination of the suicidal vector in fish after ZnCl(2) treatment.     

Characterization of an S-layer glycoprotein produced in the course of S-layer variation of<Emphasis Type="Italic"> Bacillus stearothermophilu</Emphasis>s ATCC 12980 and sequencing and cloning of the<Emphasis Type="Italic"> sbsD</Emphasis> gene encoding the protein moiety

The cell surface of Bacillus stearothermophilus ATCC 12980 is completely covered by an oblique lattice which consists of the S-layer protein SbsC. On SDS-polyacrylamide gels, the mature S-layer protein migrates as a single band with an apparent molecular mass of 122 kDa. During cultivation of B. stearothermophilus ATCC 12980 at 67 degrees C instead of 55 degrees C, a variant developed that had a secondary cell wall polymer identical to that of the wild-type strain, but it carried an S-layer glycoprotein that could be separated on SDS-polyacrylamide gels into four bands with apparent molecular masses of 92, 118, 150 and 175 kDa. After deglycosylation, only a single protein band with a molecular mass of 92 kDa remained. The complete nucleotide sequence encoding the protein moiety of this S-layer glycoprotein, termed SbsD, was established by PCR and inverse PCR. The sbsD gene of 2,709 bp is predicted to encode a protein of 96.2 kDa with a 30-amino-acid signal peptide. Within the 807 bp encoding the signal peptide and the N-terminal sequence (amino acids 31-269), different nucleotides for sbsD and sbsC were observed in 46 positions, but 70% of these mutations were silent, thus leading to a level of identity of 95% for the N-terminal parts. The level of identity of the remaining parts of SbsD and SbsC was below 10%, indicating that the lysine-, tyrosine- and arginine-rich N-terminal region in combination with a distinct type of secondary cell wall polymer remained conserved upon S-layer variation. The sbsD sequence encoding the mature S-layer protein cloned into the pET28a vector led to stable expression in Escherichia coli HMS174(DE3). This is the first example demonstrating that S-layer variation leads to the synthesis of an S-layer glycoprotein.     

A recombinant bacterial cell surface (S-layer)-major birch pollen allergen-fusion protein (rSbsC/Bet v1) maintains the ability to self-assemble into regularly structured monomolecular lattices and the functionality of the allergen

The mature crystalline bacterial cell surface (S-layer) protein SbsC of Bacillus stearothermophilus ATCC 12980 comprises amino acids 31-1099 and assembles into an oblique lattice type. As the deletion of up to 179 C-terminal amino acids did not interfere with the self-assembly properties of SbsC, the sequence encoding the major birch pollen allergen (Bet v1) was fused to the sequence encoding the truncated form rSbsC(31-920). The S-layer fusion protein, termed rSbsC/Bet v1, maintained the ability to self-assemble into flat sheets and open-ended cylinders. The presence and the functionality of the fused Bet v1 sequence was proved by blot experiments using BIP1, a monoclonal antibody against Bet v1 and Bet v1-specific IgE-containing serum samples from birch pollen allergic patients. The location and accessibility of the allergen moiety on the outer surface of the S-layer lattice were demonstrated by immunogold labeling of the rSbsC/Bet v1 monolayer, which was obtained by oriented recrystallization of the S-layer fusion protein on native cell wall sacculi. Thereby, the specific interactions between the N-terminal part of SbsC and a distinct type of secondary cell wall polymer were exploited. This is the first S-layer fusion protein described that had retained the specific properties of the S-layer protein moiety in addition to those of the fused functional peptide sequence.     

Characterization of mutants of Caulobacter crescentus defective in surface attachment of the paracrystalline surface layer.

Strains of Caulobacter crescentus express a paracrystalline surface layer (S-layer) consisting of the protein RsaA. Mutants of C. crescentus NA1000 and CB2, isolated for their ability to grow in the absence of calcium ions, uniformly no longer had the S-layer attached to the cell surface. However, RsaA was still produced, and when colonies grown on calcium-sufficient medium were examined, large two-dimensional arrays of S-layer were found intermixed with the cells. Such arrays were not found in calcium-deficient medium even when high levels of magnesium ions were provided. The arrays could be disrupted with divalent ion chelators and more readily with the calcium-selective ethylene glycol-bis (beta-aminoethyl ether)N,N,N',N'-tetraacetic acid (EGTA). Thus, the outer membrane surface was not needed as a template for self-assembly, but calcium likely was. The cell surface and S-layer gene of assembly-defective mutants of NA1000 were examined to determine the basis of the S-layer surface attachment defect. Mutants had no detectable alteration in the rough lipopolysaccharide (LPS) or a characterized capsular polysaccharide, but another polysaccharide molecule was greatly reduced or absent in all calcium-independent mutants. The molecule was shown to be a smooth LPS with a core sugar and fatty acid complement identical to those of the rough LPS and an O polysaccharide of homogeneous length, tentatively considered to be composed of 4,6-dideoxy-4-amino hexose, 3,6-dideoxy-3-amino hexose, and glycerol in equal proportions. This molecule (termed SLPS) was detectable by surface labeling with a specific antiserum only when the S-layer was not present. The rsaA genes from three calcium-independent mutants were cloned and expressed in an S-layer-negative, SLPS-positive strain. A normal S-layer was produced, ruling out defects in rsaA in these cases. It is proposed that SLPS is required for S-layer surface attachment, possibly via calcium bridging. The data support the possibility that calcium binding is required to prevent an otherwise lethal effect of SLPS. If true, mutations that eliminate the O polysaccharide of SLPS eliminate the lethal effects of calcium-deprived SLPS, at the expense of S-layer attachment.     

Three-dimensional reconstruction of the flagellar filament of Caulobacter crescentus. A flagellin lacking the outer domain and its amino acid sequence lacking an internal segment

We obtained a three-dimensional reconstruction of the flagellar filament of Caulobacter crescentus CB15 from electron micrographs of negatively stained preparations. The C. crescentus filament appears, both in negative stain and in the frozen-hydrated state, significantly smoother and narrower than other filaments. Its helical symmetry, and unit cell size, however, are similar to that of other filaments. Although the molecular weight of the C. crescentus flagellin is about half that of other plain flagellins, there is only one monomer per unit cell as indicated by diffraction studies and by linear mass density measurements with the scanning transmission electron microscope. Alignment of the primary amino acid sequences of Salmonella typhimurium (serotype i) and C. crescentus (29,000 Mr) flagellins shows that whereas there is homology at the amino and carboxyterminal ends of the two sequences, the central segment of the S. typhimurium sequence has no homology to that of C. crescentus. A correlated comparison between the three-dimensional reconstructions of the two filaments and primary amino acid sequences of the two flagellins suggests that: (1) the C. crescentus subunit is missing the outer molecular domain but is, otherwise, similar to that of S. typhimurium; (2) the outer molecular domain in S. typhimurium corresponds, therefore, to a central stretch of the primary amino acid sequence; and (3) the outer molecular domain, missing in C. crescentus, is not obligatory for flagellar motility.     

S-layer nanoglycobiology of bacteria

Cell surface layers (S-layers) are common structures of the bacterial cell envelope with a lattice-like appearance that are formed by a self-assembly process. Frequently, the constituting S-layer proteins are modified with covalently linked glycan chains facing the extracellular environment. S-layer glycoproteins from organisms of the Bacillaceae family possess long, O-glycosidically linked glycans that are composed of a great variety of sugar constituents. The observed variations already exceed the display found in eukaryotic glycoproteins. Recent investigations of the S-layer protein glycosylation process at the molecular level, which has lagged behind the structural studies due to the lack of suitable molecular tools, indicated that the S-layer glycoprotein glycan biosynthesis pathway utilizes different modules of the well-known biosynthesis routes of lipopolysaccharide O-antigens. The genetic information for S-layer glycan biosynthesis is usually present in S-layer glycosylation (slg) gene clusters acting in concert with housekeeping genes. To account for the nanometer-scale cell surface display feature of bacterial S-layer glycosylation, we have coined the neologism 'nanoglycobiology'. It includes structural and biochemical aspects of S-layer glycans as well as molecular data on the machinery underlying the glycosylation event. A key aspect for the full potency of S-layer nanoglycobiology is the unique self-assembly feature of the S-layer protein matrix. Being aware that in many cases the glycan structures associated with a protein are the key to protein function, S-layer protein glycosylation will add a new and valuable component to an 'S-layer based molecular construction kit'. In our long-term research strategy, S-layer nanoglycobiology shall converge with other functional glycosylation systems to produce 'functional' S-layer neoglycoproteins for diverse applications in the fields of nanobiotechnology and vaccine technology. Recent advances in the field of S-layer nanoglycobiology have made our overall strategy a tangible aim of the near future.     

Structure of a novel lipid A obtained from the lipopolysaccharide of Caulobacter crescentus

Caulobacter crescentus CB15 is a dimorphic bacterium that is best known as a prokaryotic model for cell development. However, it is also being exploited in biotechnology, where the crystalline surface (S-layer) protein secretion system has been adapted for heterologous protein display or secretion. Because the S-layer attaches to the cell surface via lipopolysaccharide (LPS) and since the LPS represents a potential endotoxin contaminant of recombinant proteins, the lipid A component was examined in detail. LPS was acid hydrolyzed to obtain crude lipid A, which was methylated and purified by HPLC. HPLC peak fractions were analyzed by mass spectrometry and nuclear magnetic resonance spectroscopy. The structure of the major lipid A of C. crescentus comprised the tetrasaccharide backbone alpha-D-GalpA-(1-->4)-beta-D-DAG-(1-->6)-alpha-D-DAG-(1-->1)-alpha-D-GalpA substituted with six fatty acids, and a molecular mass of 1875 (GalpA, galactopyranuronic acid; DAG, 2,3-diamino-2,3-dideoxyglucopyranose). No phosphate residues were detected. The major lipid A component had 12:0[3-O[Delta(5)-12:1(3-OH)]] and 12:0[3-O(Delta(5)-12:1)] fatty acyl chains at either the 3'- or the 2' positions of the distal subunit DAG B, and 12:0(3-OH) and 12:0[3,6-(OH)( 2)] fatty acyl chains at 3- and 2- positions of the reducing end subunit DAG A, respectively. In addition, several other variations in the structure were observed. The LPS was evaluated for TNF-alpha inducing activity and consistent with its unusual lipid A structure (relative to that of enteric bacteria), the activity was reduced by greater than 100-fold as compared to Escherichia coli ReLPS. This and other evidence suggests the potential application of this lipid A as a vaccine adjuvant or the suitability of Caulobacter displaying antigens for formulation of whole cell vaccines.