The complete 30-base-pair origin region of bacteriophage phi X174 in a plasmid is both required and sufficient for in vivo rolling-circle DNA replication and packaging

The origin of replication of the isometric single-stranded DNA bacteriophages is located in a specific sequence of 30 nucleotides, the origin region, which is highly conserved in these phage genomes. Plasmids harboring this origin region are subject to rolling-circle DNA replication and packaging of single-stranded (ss) plasmid DNA into phage coats in phi X174 or G4-phage-infected cells. This system was used to study the nucleotide sequence requirements for rolling-circle DNA replication and DNA packaging employing plasmids which contain the first 24, 25, 26, 27, 28 and the complete 30-base-pair (bp) origin region of phi X174. No difference in plasmid ss DNA packaging was observed for plasmids carrying only the 30-bp origin region and plasmids carrying the 30-bp origin region plus surrounding sequences (i.e. plasmids carrying the HaeIII restriction fragment Z6B of phi X174 replicative-form DNA). This indicates that all signals for DNA replication and phage morphogenesis are contained in the 30-bp origin region and that no contribution is made by sequences which immediately surround the origin region in the phi X174 genome. The efficiency of packaging of plasmid ssDNA for plasmids containing deletions in the right part of the origin region decreases drastically when compared with the plasmid containing the complete 30-bp origin region (for a plasmid carrying the first 28 bp of the origin region to approximately 5% and 0.5% in the phi X174 and G4 systems respectively). Previous studies [Fluit, A.C., Baas, P.D., van Boom, J.H., Veeneman, G.H. and Jansz, H.S. (1984) Nucleic Acids Res. 12, 6443--6454] have shown that the presence of the first 27 bp of the origin region is necessary as well as sufficient for cleavage of the viral strand in the origin region by phi X174 gene A protein. Moreover, Brown et al. [Brown, D.R., Schmidt-Glenewinkel, T., Reinberg, D. and Hurwitz, J. (1983) J. Biol. Chem. 258, 8402--8412] have shown that omission of the last 2 bp of the origin region does not interfere with phi X174 rolling-circle DNA replication in vitro. Our results therefore suggest that for optimal phage development in vivo, signals in the origin region are utilized which have not yet been noticed by the in vitro systems for phi X174 phage DNA replication and morphogenesis.     

Function and structure of microvirid phage alpha 3 genome. DNA sequence of H gene and properties of missense H mutant

The nucleotide sequence of wild-type alpha 3 H gene and its surrounding region was determined and compared with those of phi X174 and G4. The corresponding DNA regions in double mutants amJH22, amJH69 and amJH76 were also sequenced and their missense mutation sites located. A phage strain missH22 having a single missense mutation in gene H was constructed by replacing the J region of amJH22 in vitro with the wild-type DNA. Like amJH22, the missense mutant coded for H protein with aberrant electrophoretic mobility, but formed normal plaques on suppressor-deficient Escherichia coli. Heat stability, plating efficiency on certain hosts and rate of eclipse were higher in strain missH22 than in wild-type phage.     

Isolation and characterization of phi X174 mutants carrying lethal missense mutations in gene G.

A previously constructed Escherichia coli transformant carrying a functional copy of bacteriophage phi X174 gene G on a plasmid, p phi XG, was used to isolate gene G mutants carrying temperature sensitive and lethal missense mutations. Two of the mutations have been characterized by sequencing: one carries a G --> A transition at residue 2821 producing a Gly --> Ser change in codon 143 of the G spike protein; the other carries an A --> G transition at residue 2678 producing Glu --> Gly change in codon 95. Sequencing DNA from 2 other mutants carrying lethal mutations that are rescued with p phi XG did not reveal any changes in the coding sequence. The lesion is believed to be in the intercistronic region between genes F and G. The adsorption kinetics for these mutants appear to be normal. Their burst size is about 25% that of wild type phi X174 on the host carrying p phi XG. These results along with previous results from the senior author's laboratory demonstrate that p phi XG can be used to rescue any gene G mutant of phi X174 regardless of the nature of the mutation involved.     

Gene A protein cleavage of recombinant plasmids containing the phi X174 replication origin

Synthetic oligonucleotides, DNA ligase and DNA polymerase were used to construct double-stranded DNA fragments homologous to the first 25, 27 or 30 b.p. of the origin of replication of bacteriophage phi X174 (nucleotides 4299-4328 of the phi X174 DNA sequence). The double-stranded DNA fragments were cloned into the unique SmaI or HindIII restriction sites in the kanamycin-resistance gene of pACYC177 (AmpR, KmR). Recombinant plasmids were picked up by colony hybridization. DNA sequencing showed that not only recombinant plasmids with the expected insert were formed, but also recombinant plasmids with a shorter insert. Recombinant plasmids with an insert homologous to the first 24, 25, 26, 27, 28 or all 30 b.p. of the phi X174 origin region were thus obtained. Supercoiled plasmids containing a sequence homologous to the first 27, 28 or 30 b.p. of the phi X174 origin region are nicked by the phi X174 gene A protein. However, the other supercoiled plasmids are not nicked by the phi X174 gene A protein. These results show that the first 27 b.p. of the phi X174 origin region are sufficient as well as required for the initiation step in phi X174 RF DNA replication, i.e. the cleavage by gene A protein.     

Genes and regulatory sequences of bacteriophage phi X174

Fragments of the DNA of bacteriophage phi X174 were inserted in the plasmids pACYC177 and pBR322, in order to test the in vivo effects of separate phage genes and regulatory sequences. The phi X174 inserts were identified by recombination and complementation with phage mutants, followed by restriction enzyme analysis. The genes B, C, F and G can be maintained stably in the cell even when there is efficient expression of these viral genes. Recombinant plasmids with the complete genes D and E can only be maintained when the expression of these genes is completely blocked. Expression of complete H and J genes could not yet be demonstrated. The intact gene A was apparently lethal for the host cell, as it was never found in the recombinants. The genes F and G are expressed, even when they are not preceded by one of the well characterized viral or plasmid promoter sequences. Screening of the nucleotide sequence of phi X174 gives two promoter-like sequences just in front of the two genes. Viral sequences with replication signals (the phi X174 (+) origin of replication, the initiation site for complementary strand synthesis and the incompatibility sequence) appeared to be functional also when inserted in recombinant plasmids. A plasmid with the phi X (+) origin can be forced to a rolling circle mode of replication. The A protein produced by infecting phages works in trans on the cloned viral origin. The (-) origin can function as initiation signal for complementary strand synthesis during transduction of single-stranded plasmid DNA. The intracellular presence of the incompatibility sequence on a plasmid prevents propagation of infecting phages.     

DNA sequences which support activities of the bacteriophage phi X174 gene A protein

The DNA sequence of 30 nucleotides which surrounds the origin of viral strand DNA replication is highly conserved amongst the icosahedral single-stranded DNA bacteriophages. The A gene of these phages encodes a protein which is required for initiation and termination of viral strand DNA synthesis and acts as a nicking-closing activity specifically within this 30-nucleotide sequence. A system of purified Escherichia coli host proteins and phi X174 gene A protein has been developed which specifically replicates in vitro the viral strand of phi X174 from RF (replicative form) I template DNA and yields single-stranded circular DNA products (RF leads to SS(c) DNA replication system). Recombinant plasmids carrying inserts derived from phage phi X174 or G4 DNA which range in length from 49 to 1175 base pairs and contain the 30-nucleotide conserved sequence have been shown to support phi X A protein-dependent DNA synthesis in vitro in this replication system. We report here that insertion of the 30-nucleotide sequence alone into pBR322 allows the resulting recombinant plasmids to support phi X A protein-dependent in vitro DNA synthesis as efficiently as phi X174 template DNA in the RF leads to SS(c) replication system. The 30-nucleotide sequence functions as a fully wild type DNA replication origin as determined by the rate of DNA synthesis and the structure of resulting DNA products. Furthermore, the DNA sequence requirements for nicking of RF I DNA by the phi X A protein and for supporting replication origin function have been partially separated. Homology to positions 1, 29, and 30 of the 30-nucleotide conserved sequence are not required for cleavage of RF I DNA by the A protein; homology to position 1 but not 29 or 30 is required for efficient DNA replication.     

Effect of phi X C protein on leading strand DNA synthesis in the phi X174 replication pathway

The influence of the bacteriophage phi X174 (phi X) C protein on the replication of bacteriophage phi X174 DNA has been examined. This small viral protein, which is required for the packaging of phi X DNA into proheads, inhibits leading strand DNA synthesis. The inhibitory effect of the phi X C protein requires a DNA template bearing an intact 30-base pair (bp) phi X origin of DNA replication that is the target site recognized by the phi X A protein. Removal of nucleotides from the 3' end of this 30-bp conserved origin sequence prevents the inhibitory effects of the phi X C protein. Leading strand replication of supercoiled DNA substrates containing the wild-type phi X replication origin results in the production of single-stranded circular DNA as well as the formation of small amounts of multimeric and sigma structures. These aberrant products are formed when the termination and reinitiation steps of the replication pathway reactions are skipped as the replication fork moves through the origin sequence. Replication carried out in the presence of the phi X C protein leads to a marked decrease in these aberrant structures. While the exact mechanism of action of the phi X C protein is not clear, the results presented here suggest that the phi X C protein slows the movement of the replication fork through the 30-bp origin sequence, thereby increasing the fidelity of the termination and reinitiation reactions. In keeping with the requirement for the phi X C protein for efficient packaging of progeny phi X DNA into proheads, the phi X C protein-mediated inhibition of leading strand synthesis is reversed by the addition of proteins essential for phi X bacteriophage formation. Incubation of plasmid DNA substrates bearing mutant 30 base pair phi X origin sequences in the complete packaging system results in the in vitro packaging and production of infectious particles in a manner consistent with the replication activity of the origin under study.     

Eclipse kinetics as a probe of quaternary structure in bacteriophage phi X174

The extracellular form of bacteriophage phi X174 consists of single-stranded DNA within an icosahedral capsid, which has short spikes at each of its vertices. Each spike is composed of gene G and H proteins, while the capsid itself consists of gene F protein. Since several molecules of gene H protein are injected into the cell along with the DNA, specific protein--protein and DNA--protein interactions must be broken when the genome exits and leaves an intact capsid structure at the receptor site. To demonstrate this we examined the eclipse (DNA ejection) reaction with two types of phi X174 mutants. The first contains missense mutations in a capsid or spike protein gene, and the second involves insertions or deletions in non-coding regions of the DNA. Using an improved procedure, the eclipse rate in vivo of the eclipse mutants Fcs70 has been redetermined over a larger temperature range than in previous studies. The three- to fivefold decrease in rate between 37 degrees C and 25 degrees C is due to an increase in both the enthalpy and entropy of activation when compared to the wild-type values of these kinetic parameters. This missence mutation also confers an increase in virus stability in 2 to 3 M-urea. In contrast to this, inserting 163 bases into the length of DNA packaged within the phi X174 capsid does not lead to a detectable change in eclipse rate over the same temperature range. yet this insertion into the J--F intercistronic region imparts a significant decrease in virus stability in urea. These results suggest that a specific set of non-covalent interactions is involved in phi X174 DNA ejection. This is supported by the small (50%), but significant, increase in eclipse rate that occurs when 27 bases are deleted from the J--F intercistronic region. The latter effect must be base-sequence-specific since no change in rate is observed when only seven of the 27 bases are deleted. Thus, the kinetics of the phi X174 eclipse reaction can be used as a sensitive probe of quaternary structure by correlating the change in reaction rate with alterations in amino acid and base sequences in the structural components of the virus.     

Functional organization of the plasmid pT181 replication origin

Replication of the staphylococcal plasmid pT181 is initiated at the origin (ori) with the introduction of a site-specific nick by the plasmid-encoded initiator protein RepC. Deletion analysis showed that a sequence of about 70 base-pairs is required for full ori function, including the ability to compete with a co-resident wild-type origin for the trans-acting RepC protein. A shorter sequence of 43 base-pairs is sufficient for origin function in the absence of competition. Single and double point mutations within these 43 base-pairs were used to determine the sequence requirement for replication within the minimal origin. Deletion mutants and point mutants were tested in replication and competition assays in vivo and in vitro, and in a RepC-mediated nicking assay.     

Effect of SSB protein on cleavage of single-stranded DNA by phi X gene A protein and A* protein.

Gene A protein of bacteriophage phi X174 plays a role as a site-specific endonuclease in the initiation and termination of phi X rolling circle DNA replication. To clarify the sequence requirements of this protein we have studied the cleavage of single-stranded restriction fragments from phi X and G4 viral DNAs using purified gene A protein. The results show that in both viral DNAs cleavage occurs at the origin and at one additional site which shows striking sequence homology with the origin region. During rolling circle replication the single-stranded viral DNA tail is covered with single-stranded DNA binding (SSB) protein. Therefore, we have also studied the effect of SSB on phi X gene A protein cleavage. In these conditions only single-stranded fragments containing the complete or almost complete origin region of 30 bases are cleaved, whereas cleavage at the additional sites of phi X or G4 viral DNAs does not occur. A model for termination of rolling circle replication which is based on these findings is presented. Finally, we present evidence that the second product of gene A, the A* protein, cleaves phi X viral DNA at the additional cleavage site in the presence of SSB, not only in vitro but also in vivo. The functional significance of this cleavage in vivo is discussed.     

Alteration of the ATG start codon of the A protein of bacteriophage phi X174 into an ATT codon yields a viable phage indicating that A protein is not essential for phi X174 reproduction

Bacteriophage phi X174 gene A encodes two proteins: the gene A protein and the smaller A protein, which is synthesized from a translational start signal within the A gene in the same reading frame as the gene A protein. The gene A protein is involved in initiation, elongation and termination of rolling circle DNA replication. The role of the A protein in the life cycle of phi X174, however, is unknown. Using oligonucleotide-directed mutagenesis a viable phi X174 mutant was constructed in which the ATG start codon of the A protein was changed into an ATT codon. This mutant, phi X-4499T, does not synthesize A protein. The burst size of phi X-4499T amounted to 50% of that of wild type phi X174. This indicates that A protein, although advantageous for phage reproduction, is not essential during the life cycle of bacteriophage phi X174.     

DNA bending near the replication origin of IncFII plasmid NR1.

The DNA replication origin of plasmid NR1 is located approximately 190 base pairs downstream from the 3' end of the repA1 gene, which encodes the essential initiation protein for replication of the plasmid. Restriction endonuclease fragments that contain the NR1 replication origin and its flanking sequences at circularly permuted positions were obtained by digesting oligomers of ori-containing DNA fragments with sets of enzymes that each cut only once in every ori fragment. Polyacrylamide gel electrophoresis of these permuted restriction fragments showed anomalous mobilities, indicating the presence of a DNA bending locus. Through analysis of the relative mobility plots of these permuted fragments, we found one or two possible DNA bending sites located in the intervening region between the repA1 gene and the replication origin of NR1. It seems possible that DNA bending in this region might help to orient the replication origin alongside the repA1 gene, which could contribute to the cis-acting character of the RepA1 initiation protein.     

The nuclease specificity of the bacteriophage phi X174 A* protein.

The A* protein of bacteriophage phi X174 is a single-stranded DNA specific nuclease. It can cleave phi X viral ss DNA in many different places. The position of these sites have been determined within the known phi X174 nucleotide sequence (1). From the sequences at these sites it is clear that the A* protein recognizes and cleaves at sites that show only partial homology with the origin of RF DNA replication in the phi X DNA. Different parts of the origin sequence can be deduced that function as a signal for recognition and cleavage by the A* protein. We conclude that different parts within the DNA recognition domain of the A* protein are functional in the recognition of the origin sequence in single-stranded DNA. The existence of different DNA recognition domains in the A* protein, and therefore also in the A protein, leads to a model that can explain how the A protein performs its multiple function in the phi X174 DNA replication process (2).     

Regions of incompatibility in single-stranded DNA bacteriophages phi X174 and G4.

The intracellular presence of a recombinant plasmid containing the intercistronic region between the genes H and A of bacteriophage phi X174 strongly inhibits the conversion of infecting single-stranded phi X DNA to parental replicative-form DNA. Also, transfection with single-stranded or double-stranded phi X174 DNA of spheroplasts from a strain containing such a "reduction" plasmid shows a strong decrease in phage yield. This phenomenon, the phi X reduction effect, was studied in more detail by using the phi X174 packaging system, by which plasmid DNA strands that contain the phi X(+) origin of replication were packaged as single-stranded DNA into phi X phage coats. These "plasmid particles" can transduce phi X-sensitive host cells to the antibiotic resistance coded for by the vector part of the plasmid. The phi X reduction sequence in the resident plasmid strongly affected the efficiency of the transduction process, but only when the transducing plasmid depended on primosome-mediated initiation of DNA synthesis for its conversion to double-stranded DNA. The combination of these results led to a model for the reduction effect in which the phi X reduction sequence interacted with an intracellular component that was present in limiting amounts and that specified the site at which phi X174 replicative-form DNA replication takes place. The phi X reduction sequence functioned as a viral incompatibility element in a way similar to the membrane attachment site model for plasmid incompatibility. In the DNA of bacteriophage G4, a sequence with a similar biological effect on infecting phages was identified. This reduction sequence not only inhibited phage G4 propagation, but also phi X174 infection.     

DNA sequence requirements for replication of polyomavirus DNA in vivo and in vitro.

Cell extracts of FM3A mouse cells replicate polyomavirus (Py) DNA in the presence of immunoaffinity-purified Py large T antigen, deoxynucleoside triphosphates, ATP, and an ATP-generating system. This system was used to examine the effects of mutations within or adjacent to the Py core origin (ori) region in vitro. The analysis of plasmid DNAs containing deletions within the early-gene side of the Py core ori indicated that sequences between nucleotides 41 and 57 define the early boundary of Py DNA replication in vitro. This is consistent with previously published studies on the early-region sequence requirements for Py replication in vivo. Deleting portions of the T-antigen high-affinity binding sites A and B (between nucleotides 57 and 146) on the early-gene side of the core ori led to increased levels of replication in vitro and to normal levels of replication in vivo. Point mutations within the core ori region that abolish Py DNA replication in vivo also reduced replication in vitro. A mutant with a reversed orientation of the Py core ori region replicated in vitro, but to a lesser extent that wild-type Py DNA. Plasmids with deletions on the late-gene side of the core ori, within the enhancer region, that either greatly reduced or virtually abolished Py DNA replication in vivo replicated to levels similar to those of wild-type Py DNA plasmids in vitro. Thus, as has been observed with simian virus 40, DNA sequences needed for Py replication in vivo are different from and more stringent than those required in vitro.     

Studies on the role of the phi X174 gene A protein in phi X174 viral strand synthesis. III. Replication of DNA containing two viral replication origins

Supercoiled plasmid bearing two wild-type phi X origin sequences on the same strand supported the phi X A protein-dependent in vitro formation of two smaller single-stranded circles, the lengths of which were equivalent to the distance between the two origins. Additional double origin plasmids were utilized to determine whether origins defective in the initial nicking event (initiation) could support circularization (termination). In all cases tested, the presence of a mutant origin on the same strand with a wild-type origin affected the level of replication in a manner consistent with the previously determined activity of the mutant origin. When a functional mutant origin was present on the same strand as a wild-type origin, the efficiency of replication and the DNA products formed were almost identical to those of the plasmid containing two wild-type origins. Plasmid DNA bearing both a wild-type origin and a mutant origin that did not support phi X A protein binding or nicking activity, on the other hand, supported efficient DNA synthesis of only full-length circular products, indicating that the origin defective for initiation was incapable of supporting termination. In contrast, the presence of a wild-type origin and an origin that did bind the phi X A protein but was not cleaved resulted in a marked decrease in DNA synthesis along with the production of only full-length products. This suggests that the phi X A protein stalls when it encounters a sequence to which it can bind but cannot cleave. Replication of double origin plasmids containing one functional phi X origin on each strand of the supercoiled DNA was also examined. With such templates, synthesis from the wild-type origin predominated, indicating preferential cleavage of the intact origin sequence. Replication of such substrates also produced a number of aberrant structures, the properties of which suggested that interstrand exchange of the phi X A protein had occurred.     

The incompatibility product of IncFII R plasmid NR1 controls gene expression in the plasmid replication region.

The incompatibility properties of IncFII R plasmid NR1 were compared with those of two of its copy number mutants, pRR12 and pRR21. pRR12 produced an altered incompatibility product and also had an altered incompatibility target site. The target site appeared to be located within the incompatibility gene, which is located more than 1,200 base pairs from the plasmid origin of replication. The incompatibility properties of pRR21 were indistinguishable from those of NR1. Lambda phages have been constructed which contain the incompatibility region of NR1 or of one of its copy mutants fused to the lacZ gene. In lysogens constructed with these phages, beta-galactosidase was produced under the control of a promoter located within the plasmid incompatibility region. Lysogens containing prophages with the incompatibility regions from pRR12 and pRR21 produced higher levels of beta-galactosidase than did lysogens containing prophages with the incompatibility region from the wild-type NR1. The introduction into these inc-lac lysogens of pBR322 plasmids carrying the incompatibility regions of the wild-type or mutant plasmids resulted in decreased levels of beta-galactosidase production. For a given lysogen, the decrease was greater when the pBR322 derivative expressed a stronger incompatibility toward the plasmid from which the fragment in the prophage was derived. This suggested that the incompatibility product acts on its target to repress gene expression in the plasmid replication region.     

Insertion and deletion mutations in the repA4 region of the IncFII plasmid NR1 cause unstable inheritance.

Mutants of IncFII plasmid NR1 that have transposons inserted in the repA4 open reading frame (ORF) are not inherited stably. The repA4 ORF is located immediately downstream from the replication origin (ori). The repA4 coding region contains inverted-repeat sequences that are homologous to the terC inverted repeats located in the replication terminus of the Escherichia coli chromosome. The site of initiation of leading-strand synthesis for replication of NR1 is also located in repA4 near its 3' end. Transposon insertions between ori and the right-hand terC repeat resulted in plasmid instability, whereas transposon insertions farther downstream did not. Derivatives that contained a 35-bp frameshift insertion in the repA4 ORF were all stable, even when the frameshift was located very near the 5' end of the coding region. This finding indicates that repA4 does not specify a protein product that is essential for plasmid stability. Examination of mutants having a nest of deletions with endpoints in or near repA4 indicated that the 3' end of the repA4 coding region and the site of leading-strand initiation could be deleted without appreciable effect on plasmid stability. Deletion of the pemI and pemK genes, located farther downstream from repA4 and reported to affect plasmid stability, also had no detectable effect. In contrast, mutants from which the right-hand terC repeat, or both right- and left-hand repeats, had been deleted were unstable. None of the insertion or deletion mutations in or near repA4 affected plasmid copy number. Alteration of the terC repeats by site-directed mutagenesis had little effect on plasmid stability. Plasmid stability was not affected by a fus mutation known to inactivate the termination function. Therefore, it appears that the overall integrity of the repA4 region is more important for stable maintenance of plasmid NR1 than are any of the individual known features found in this region.     

Genome structure of Halobacterium halobium: plasmid dynamics in gas vacuole deficient mutants

Halobacterium halobium contains two gas vacuole protein genes that are located in plasmid pHH1 (p-vac) and in the chromosomal DNA (c-vac). The mutation frequency for these genes is different: the constitutively expressed p-vac gene is mutated with a frequency of 10(-2), while the chromosomal gene expressed in the stationary phase of growth is mutated with a frequency of 10(-5). The difference in the mutation susceptibility is due to the dynamics of plasmid pHH1. p-vac gene mutations are caused (i) by the integration of an insertion element or (ii) by a deletion event encompassing the p-vac gene region. In contrast, c-vac mutants analyzed to date incurred neither insertion elements nor deletions. Deletion events within pHH1 occur at high frequencies during the development of a H. halobium culture. The investigation of the fusion regions resulting from deletion events indicates that insertion elements are involved. The analysis of pHH1 deletion variants led to a 4 kilobase pair DNA region containing the origin of replication of the pHH1 plasmid.     

Studies on the role of the phi X174 gene A protein in phi X viral strand synthesis. I. Replication of DNA containing an alteration in position 1 of the 30-nucleotide icosahedral bacteriophage origin

The influence of a C----G transversion at position 1 of the 30-base pair replication origin of bacteriophage phi X174 replicative form I DNA (phi X RFI) was examined in the RF----single-stranded circular DNA replication pathway catalyzed by the combined action of the purified phi X A protein, the Escherichia coli DNA polymerase III holoenzyme, rep helicase, and single-stranded DNA binding protein (Eisenberg, S., Scott, J.F., and Kornberg, A. (1976) Proc. Natl. Acad. Sci. U.S.A. 73, 1594-1597; Reinberg, D., Zipursky, S.L., and Hurwitz, J. (1981) J. Biol. Chem. 256, 13143-13151). RFI DNA containing this transversion was cleaved to RFII by the phi X A protein as effectively as DNA containing the wild-type origin. The altered duplex DNA, however, supported replication at a slower rate (3- to 4-fold) than the wild-type DNA due to a defect in the termination and reinitiation reactions catalyzed by the phi X A protein. This defect resulted in the accumulation of DNA products containing long single strands covalently joined to the mutant DNA. These single strands were susceptible to nuclease S1 and exonuclease VII attack. The defect in the template DNA containing C----G transversion was not corrected when this mutant origin was placed on the same strand with a wild-type origin. This double-origin DNA was also replicated poorly and led to the accumulation of large products, in contrast to the products formed with RFI DNA containing two wild-type 30-base pair replication origins on the same strand.