Technique validation by liquid chromatography for the determination of acyclovir in plasma

In this research project, a high-performance liquid chromatography (HPLC) method was developed for the determination of acyclovir (ACV) in plasma. The plasma samples, recharged with acyclovir and in presence of 5'-N-methylcarboxyamidoadenosine (MECA) as an internal standard, were purified using a solid-phase extraction technique with Waters Oasis HLB columns. The separation of the components from the extract was carried out in a LiChrospher 100 RP-18 column for further ultraviolet detection at a wavelength range of 250-260 nm. The mobile phase composition was 18% acetonitrile, sodium dodecylsulphate 5 mM and phosphate buffer at pH 2.6 with an analysis time of 13 min per sample. The average retention time for acyclovir was of 5.0 min and for the internal standard 11.2 min. The calibration curve was linear ranging between 0.05 and 1.80 microg/ml. The detection limit was 0.006 microg/ml with a quantification limit of 0.020 microg/ml. The ACV recuperation percentage for 250 microl of plasma was between 94.7 and 109.7% with a coefficient of variation not higher than 5.2%. This method was developed and validated for use in bioavailability and bioequivalence studies.     

One-step purification procedure for UDP-N-acetylmuramyl-peptide murein precursors from Bacillus cereus

A method is described for the rapid isolation of the activated murein precursors UDP-N-acetyl-muramyl-pentapeptide (UDP-MurNAc-pentapeptide) and UDP-MurNAc-tripeptide from Bacillus cereus. After accumulation of the precursors by inhibition of murein synthesis either in the presence of vancomycin (for the pentapeptide precursor) or D-cycloserine (for the tripeptide precursor) the cells were extracted with boiling water. Prior to high pressure liquid chromatography the material was freed from acid precipitable material. UDP-MurNAc-penta- and tripeptide were separated from other components by reversed-phase HPLC on Hypersil ODS using isocratic elution conditions with sodium phosphate buffer. The precursors were obtained with at least 98% purity and a yield of about 50 mumol from a 10-l culture of B. cereus.     

The composition of the murein of Escherichia coli

Escherichia coli murein, the polymer from which the shape-maintaining structure of the cell envelope is made, shows unexpected complexity. The separation of murein building blocks with high performance liquid chromatography reveals about 80 different types of muropeptides. Their behavior in high performance liquid chromatography and their chemical structure are described. The complexity of E. coli murein is due to the free combination of seven different types of side chains (L-Ala-D-Glu-R with R = -OH, -m-A2pm, -m-A2pm-D-Ala, -m-A2 pm-Gly, -m-A2pm-D-Ala-D-Ala, -m-A2pm-D-Ala-Gly, -m-A2pm-Lys-Arg) with two types of cross-bridges (D-Ala-m-A2pm, -m-A2pm-m-A2pm). The novel type of cross-bridge, A2pm-A2pm, contains an L,D-peptide bond, as shown by Edman degradation and chemical analysis of the reaction products. The A2pm-A2pm cross-bridge is assumed to play a role in the adaptation of the cross-linkage of murein to different growth conditions of the cell. The structural data of E. coli murein agree best with a model of a thin, however multilayered, murein sacculus.     

High pressure liquid chromatography solvent systems for studies of bile acid biosynthesis

Reversed phase high pressure liquid chromatography (HPLC) solvent systems have been developed for the separation of intermediates in the formation of bile acids and bile acid conjugates from cholesterol. Four different mobile phases (water-methanol, 10 mM acetate buffer (pH 4.37)-methanol, 30 mM trifluoroacetic acid (pH 2.9 with triethylamine)-methanol, and 50 mM potassium phosphate buffer (pH 7.0)-2-propanol) have been applied to obtain separation of all the main intermediates with use of the same reversed phase column (Zorbax ODS).     

Separation of bisbenzylisoquinoline alkaloids by micellar electrokinetic chromatography

The micellar electrokinetic chromatographic (MEKC) separation of seven bisbenzylisoquinoline alkaloids has been developed. The effects of various separating factors were studied. Optimum separation was achieved using a buffer (pH 9.2) of 20 mM sodium borate and 20 mM sodium dihydrogen phosphate buffer containing 55 mM sodium cholate; the optimum voltage and injection time were 21 kV and 0.05 min, respectively. Highest peak efficiency was obtained when the analytes were dissolved in 10 mM sodium dodecyl sulphate as sample matrix for injection. The elution order of the bisbenzylisoquinoline alkaloids was related to their lipophilicity. The resolution, run time and detection limits of the MEKC method were compared with those of an HPLC method developed previously.     

The separation of o-phthalaldehyde derivatives of amino acids by reversed-phase chromatography on octylsilica columns

Amino acids were reacted with o-phthalaldehyde and 2-mercaptoethanol and were separated using a simple linear gradient from 10 to 65% methanol over 15 min on an octyl silica (C8) column by reversed-phase chromatography. The separation obtained was found to be sensitive to the pH, ionic strength, and tetrahydrofuran concentration of aqueous solvent A [THF: sodium acetate (45 mM), pH 5.7, (4:96)]. These effects were characterized and used to design a rapid (17 min) separation of the amino acids commonly found in acid hydrolysates of proteins. A more involved procedure was used to separate the more complex mixture of amino acids that are found in enzymatic hydrolysates of proteins or in physiological fluids. The simplicity of the methods allows their use on different chromatographic systems with little or no alteration.     

The morphological transition of Helicobacter pylori cells from spiral to coccoid is preceded by a substantial modification of the cell wall.

The peptidoglycan (murein) of Helicobacter pylori has been investigated by high-performance liquid chromatography and mass spectrometric techniques. Murein from H. pylori corresponded to the A1gamma chemotype, but the muropeptide elution patterns were substantially different from the one for Escherichia coli in that the former produced high proportions of muropeptides with a pentapeptide side chain (about 60 mol%), with Gly residues as the C-terminal amino acid (5 to 10 mol%), and with (1-->6)anhydro-N-acetylmuramic acid (13 to 18 mol%). H. pylori murein also lacks murein-bound lipoprotein, trimeric muropeptides, and (L-D) cross-linked muropeptides. Cessation of growth and transition to coccoid shape triggered an increase in N-acetylglucosaminyl-N-acetylmuramyl-L-Ala-D-Glu (approximately 20 mol%), apparently at the expense of monomeric muropeptides with tri- and tetrapeptide side chains. Muropeptides with (1-->6)anhydro-muramic acid and with Gly were also more abundant in resting cells.     

Growth pattern of the murein sacculus of Escherichia coli

The mechanism by which the murein sacculus of Escherichia coli is being enlarged during growth was investigated by pulse and pulse-chase labeling with [3H]diaminopimelic acid. Changes in the composition of the sacculus during aging were analyzed in detail by high performance liquid chromatography separation of the muropeptide subunits released after complete muramidase digestion. After pulses as short as 10 s, a group of novel phosphorylated muropeptides was detected. The kinetics of their appearance is consistent with these structures being derived from the undecaprenylphosphate-linked growing points of murein. A complex maturation process of murein took place including a rapid decay of pentapeptide side chains and a 10-fold increase in tripeptidyl moieties. In addition, the total degree of cross-linkage increased from 16 to 25%, partly due to a 3-fold increase in the formation of LD-A2pm-A2pm cross-links. In pulse-chase experiments the cross-linkage started to decrease after a maximum at about 35 min of chase. The kinetics in the distribution of the radioactivity among acceptor and donor part in the major cross-bridges Tetra-Tetra and Tetra-Tri differed from each other substantially, indicating that the latter structure is completely cleaved within three generations, whereas only 40% of Tetra-Tetra is cleaved during the same time. Furthermore, the attachment of the lipoprotein to murein was delayed by about one generation. It is proposed that these findings reflect an inside-to-outside growth mechanism of the murein sacculus of E. coli.     

Determination of murein precursors during the cell cycle of Escherichia coli

A convenient and reliable method has been established that allows a quantitative determination of m-diamino[3H]pimelic acid-labelled murein precursors in 1 ml culture samples of Escherichia coli. Prior to separation by reversed-phase high-pressure liquid chromatography the lipid-linked intermediates were hydrolysed to release the muropeptides. The accuracy for the measurement of UDP-N-acetylmuramylpentapeptide (UDP-MurNAc-pentapeptide) was +/- 1.9% (SD), for undecaprenyl-P-P-MurNAc-pentapeptide (lipid I) +/- 10% (SD) and for undecaprenyl-P-P-(GlcNAc-beta 1----4)MurNAc-pentapeptide (lipid II) +/- 5% (SD). The ratio of UDP-MurNAc-pentapeptide:lipid I:lipid II was about 300:1:3 for E. coli MC4100. The relative cellular concentrations of all three precursor molecules were found not to vary throughout the cell cycle. It is concluded that elongation and division of the murein sacculus is not controlled by oscillations in the concentrations of these late murein precursors.     

Determination of scutellarin in rat plasma by high-performance liquid chromatography with ultraviolet detection

A validated high-performance liquid chromatography method is described for the determination of scutellarin in rat plasma using a liquid-liquid extraction and ultraviolet (UV) absorbance detection. The separation used a Diamonsil ODS column (250 mm x 4.6mm i.d., 5 microm particle size) with an isocratic mobile phase consisting of methanol-acetonitrile-50mM dihydrogen ammonium phosphate buffer (22:15:63 (v/v/v), adjusted to pH 2.5 with 1M phosphoric acid). The ultraviolet detector operated at 335 nm. Plasma samples were extracted with ethyl acetate after acidification. The extraction recovery of scutellarin ranged from 68.1 to 80.5%. High selectivity and a low quantitation limit (0.050 microg/ml) were achieved. The linear range was 0.050-12.5 microg/ml, correlation coefficient r=0.9981. The method has a good reproducibility, R.S.D. values were below 7.9% for within-day and between-day precision. The method is simple, rapid, and applicable to preliminary pharmacokinetic studies of scutellarin in rats.     

Chiral separation of vinpocetine using cyclodextrin-modified micellar electrokinetic chromatography

A cyclodextrin-modified micellar electrokinetic chromatography (CD-MEKC) technique has been developed for enantioseparation of vinpocetine using an inexpensive 2-hydroxypropyl-β-CD (HP-β-CD) as the chiral selector (CS). The best chiral separation was achieved using 40 mM HP-β-CD as the CS in 50 mM phosphate buffer (pH 7.0) consisting of 40 mM sodium dodecyl sulfate (SDS) at a separation temperature and separation voltage of 25°C and 25 kV, respectively. To the author's best knowledge, this is the first CD-MEKC study able to successfully separate the four stereoisomer of vinpocetine in separation time of 9.5 min and resolution of 1.04-3.87.     

Improved protocols for quantitative determination of metabolites from biological samples using high performance ionic-exchange chromatography with conductimetric and pulsed amperometric detection

Simple and reliable protocols are described for an extensive analysis of metabolites in extracts from different biological sources. The separation was performed by high performance ionic-exchange chromatography (HPIC) at alkaline pH using two types of chromatography columns and two detection methods. Organic acids and inorganic anions were separated on an ionPac AS11 column using a 0.5 to 35 mM Na0H gradient. Detection limits in the range of milligrams per liter were achieved by use of a conductivity detector equipped with an anion self-regenerating suppressor. Twelve phosphorylated compounds belonging to the glycolytic and the pentose phosphate pathways could be resolved on a CarboPac PA1 column using a Na0H/Na-acetate gradient. Quantification was achieved by pulsed amperometry with detection limits in the micromolar range. Cell extracts obtained by extraction in boiling buffered ethanol described previously could be directly injected onto HPIC columns for the separation of metabolites because the extraction procedure affected neither the retention time nor the stability of most of the metabolites, and yielded very clean chromatograms. These improved protocols were applied for a dynamic analysis of intracellular metabolites in Saccharomyces cerevisiae in response to a glucose pulse.     

Simultaneous determination of cloricromene and its active metabolite in rabbit aqueous humor by high-performance liquid chromatography

A rapid and simple method was developed for the simultaneous separation and quantification of cloricromene, a coumarine derivative, and its active metabolite, cloricromene acid, in rabbit aqueous humor. The analyses were performed by high-performance liquid chromatography using a C18 reversed-phase column (Hypersil ODS) with UV detection at 318 nm. The mobile phase consisted of acetonitrile-water containing 1% triethylamine pH 3.5, adjusted with orthophosphoric acid. An acetonitrile gradient was necessary to achieve good separation within 13 min. Timolol was found to be a suitable internal standard. The retention times ranged from 5.72 to 11.25 min. A simple pre-treatment with acetonitrile containing 0.6% HCIO4 was used to deproteinize aqueous humor samples. The limit of quantitation ranged between 10 and 20 ng/ml. The recovery was >90%. The relationship between peak areas and concentration was linear over the range between 0.01 and 3.8 microg/ml, with r2 > 0.99. The assay provided good reproducibility and accuracy for both analytes and proved to be suitable for pharmacokinetic studies of cloricromene.     

Simultaneous quantification of flavonoids and triterpenoids in licorice using HPLC

Numerous bioactive compounds are present in licorice (Glycyrrhizae Radix), including flavonoids and triterpenoids. In this study, a reversed-phase high-performance liquid chromatography (HPLC) method for simultaneous quantification of three flavonoids (liquiritin, liquiritigenin and isoliquiritigenin) and four triterpenoids (glycyrrhizin, 18alpha-glycyrrhetinic acid, 18beta-glycyrrhetinic acid and 18beta-glycyrrhetinic acid methyl ester) from licorice was developed, and further, to quantify these 7 compounds from 20 different licorice samples. Specifically, the reverse-phase HPLC was performed with a gradient mobile phase composed of 25 mM phosphate buffer (pH 2.5)-acetonitrile featuring gradient elution steps as follows: 0 min, 100:0; 10 min, 80:20; 50 min, 70:30; 73 min, 50:50; 110 min, 50:50; 125 min, 20:80; 140 min, 20:80, and peaks were detected at 254 nm. By using our technique, a rather good specificity was obtained regarding to the separation of these seven compounds. The regression coefficient for the linear equations for the seven compounds lay between 0.9978 and 0.9992. The limits of detection and quantification lay in the range of 0.044-0.084 and 0.13-0.25 microg/ml, respectively. The relative recovery rates for the seven compounds lay between 96.63+/-2.43 and 103.55+/-2.77%. Coefficient variation for intra-day and inter-day precisions lay in the range of 0.20-1.84 and 0.28-1.86%, respectively. Based upon our validation results, this analytical technique is a convenient method to simultaneous quantify numerous bioactive compounds derived from licorice, featuring good quantification parameters, accuracy and precision.     

Determination of josamycin in rat plasma by capillary electrophoresis coupled with post-column electrochemiluminescence detection

A novel determination method for josamycin (JOS) based on capillary electrophoresis-electrochemiluminescence detection has been described. In this study, platinum disk electrode (300 microm in diameter) was used as a working electrode and the conditions affecting separation and detection were investigated in detail. Under optimal condition: 40 cm separation capillary (75 microm i.d.); 1.25 V applied potential on the Pt disc of the ECL detector cell; 5 mM Ru(bpy)3(2+) and 50mM phosphate buffer (pH 7.5) in the detection cell; 12 kV separation voltage; 8s injection time; 10 kV injection voltage and 15 mM running buffer (pH 7.5), calibration curve was linear over the range from 10 ng/mL to 5.0 microg/mL with a detection limit of 3.1 ng/mL at a signal-to-noise ratio of 3. The method can be successfully applied for the determination of josamycin in rat plasma in 6 min and the extraction recoveries with spiked plasma samples were over 92%.     

Simultaneous determination of procaine,lidocaine, ropivacaine,tetracaine and bupivacaine in human plasma by high-performance liquid chromatography

A simple and sensitive high-performance liquid chromatography with ultraviolet detection (HPLC-UV) method has been developed and validated for simultaneous quantification of five local anesthetics in human plasma: procaine, lidocaine, ropivacaine, tetracaine and bupivacaine. In an ice-water bath, 500 μL plasma sample, containing 100 μg/mL neostigmine methylsulfate as anticholinesterase, was spiked with carbamazepine as internal standard and alkalized by sodium hydroxide. Liquid–liquid extraction with ethyl ether was used for plasma sample preparation. The chromatographic separation was achieved on a Kromosil ODS C18 column with a mobile phase consisting of 30 mM potassium dihydrogen phosphate buffer (0.16% triethylamine, pH adjusted to 4.9 with phosphoric acid) and acetonitrile (63/37, v/v). The detection was performed simultaneously at wavelengths of 210 and 290 nm. The chromatographic analysis time was 13 min per sample. The calibration curves of all five analytes were linear between 0.05 and 5.0 μg/mL (r² ≥ 0.998). Precision ranged from 1.4% to 7.9% and accuracy was between 91.7% and 106.5%. The validated method is applicable for simultaneous determination of procaine, lidocaine, ropivacaine, tetracaine and bupivacaine for therapeutic drug monitoring and pharmacokinetic study.     

Hydroxyapatite chromatography of phage-display virions

Hydroxyapatite column chromatography can be used to purify filamentous bacteriophage--the phage most commonly used for phage display. Virions that have been partially purified from culture supernatant by two cycles of precipitation in 2% polyethylene glycol are adsorbed onto the matrix at a density of at least 7.6 x 10(13) virions (about 3 mg) per milliliter of packed bed volume in phosphate-buffered saline (PBS; 0.15 M NaCl, 5 mM NaH2PO4, pH-adjusted to 7.0 with NaOH). The matrix is washed successively with wash buffer I(150 mM NaCl, 125 mM phosphate, pH 7.0), wash buffer II (2.55 M NaCl, 125 mM phosphate, pH 7.0), and wash buffer I; after which virions are desorbed in desorption buffer (150 mM NaCl, 200 mM phosphate, pH 7.0), and the matrix is stripped with stripping buffer (150 mM NaCl, 1 Mphosphate, pH 7.0). About half of the applied virions are recovered in desorption buffer. Western blot analysis shows that they have undetectable levels of host-derived protein contaminants that are present in the input virions and in virions purified by CsCl equilibrium density gradient centrifugation--the method most commonly used to prepare virions in high purity. Hydroxyapatite chromatography is thus an attractive alternative method for purifying filamentous virions, particularly when the scale is too large for ultracentrifugation to be practical.     

Extraction of phyllanthusols A and B from Phyllanthus acidus and analysis by capillary electrophoresis

Extracts of roots Phyllanthus acidus were examined by free zone capillary electrophoresis, micellar electrokinetic chromatography (MEKC), and MEKC using the sweeping technique which involves application of a negative potential to the inlet end of the capillary and very much longer than conventional injection times. The latter technique, using a buffer of 50 mM sodium dihydrogen phosphate (pH 2) containing 80 mM sodium dodecylsulphate and 30% methanol was found to allow complete resolution of the active constituents of P. acidus, phyllanthusols A and B, from each other and from other extracted components in under 30 min. Several other components could be detected when hydrodynamic injection times of 500 s were used. The separation, combined with an appropriate extraction procedure and using an internal standard of proguanil, permitted quantification of both phyllanthusols. Calibrations were linear over the range 2-8 micrograms/mL for phyllanthusol A, and 1-4 micrograms/mL for phyllanthusol B. Within-day and day-to-day repeatability RSDs were below 10%, and the precision of extraction RSD was around 14%. The limits of quantification and detection were 0.55 and 0.24 microgram/mL, respectively.     

Chiral Separation of Four Stereoisomers of Ketoconazole Drugs Using Capillary Electrophoresis

This work aimed to develop a chiral separation method of ketoconazole enantiomers using electrokinetic chromatography. The separation was achieved using heptakis (2, 3, 6‐tri‐O‐methyl)‐β‐cyclodextrin (TMβCD), a commonly used chiral selector (CS), as it is relatively inexpensive and has a low UV absorbance in addition to an anionic surfactant, sodium dodecyl sulfate (SDS). The influence of TMβCD concentration, phosphate buffer concentration, SDS concentration, buffer pH, and applied voltage were investigated. The optimum conditions for chiral separation of ketoconazole was achieved using 10 mM phosphate buffer at pH 2.5 containing 20 mM TMβCD, 5 mM SDS, and 1.0% (v/v) methanol with an applied voltage of 25 kV at 25 °C with a 5‐s injection time (hydrodynamic injection). The four ketoconazole stereoisomers were successfully resolved for the first time within 17 min (total analysis time was 28 min including capillary conditioning). The migration time precision of this method was examined to give repeatability and reproducibility with RSDs ≤5.80% (n =3) and RSDs ≤8.88% (n =9), respectively. Chirality 27:223–227, 2015. © 2014 Wiley Periodicals, Inc.     

Development and validation of a stability-indicating high performance liquid chromatographic (HPLC) assay for biperiden in bulk form and pharmaceutical dosage forms

Current compendial (USP) methods of assay for the analysis of biperiden in bulk form and pharmaceutical dosage forms involve the use of titrimetric and spectrophotometric procedures, respectively. These are non-selective and non-stability-indicating techniques. In this work, a stability-indicating high performance liquid chromatographic assay procedure has been developed and validated for biperiden. The liquid chromatographic separation was achieved isocratically on a symmetry C8 column (150 mm x 3.9 mm i.d., 5 microm particle size) using a mobile phase containing methanol-buffer (50:50, v/v, pH 2.50) at a flow rate of 1 ml/min and UV detection at 205 nm. The buffer was composed of sodium dihydrogen phosphate (50 mM) and 1-heptanesulfonic acid sodium salt (5 mM). The method was linear over the concentration range of 0.5-25 microg/ml (r=0.9998) with a limit of detection and quantitation 0.03 and 0.1 microg/ml, respectively. The method has the requisite accuracy, selectivity, sensitivity and precision to assay biperiden in bulk form and pharmaceutical dosage forms. Degradation products resulting from the stress studies did not interfere with the detection of biperiden and the assay is thus stability-indicating.