Impact of fermentation rate changes on potential hydrogen sulfide concentrations in wine

The correlation between alcoholic fermentation rate, measured as carbon dioxide (CO2) evolution, and the rate of hydrogen sulfide (H2S) formation during wine production was investigated. Both rates and the resulting concentration peaks in fermentor headspace H2S were directly impacted by yeast assimilable nitrogenous compounds in the grape juice. A series of model fermentations was conducted in temperature-controlled and stirred fermentors using a complex model juice with defined concentrations of ammonium ions and/or amino acids. The fermentation rate was measured indirectly by noting the weight loss of the fermentor; H2S was quantitatively trapped in realtime using a pre-calibrated H2S detection tube which was inserted into a fermentor gas relief port. Evolution rates for CO2 and H2S as well as the relative ratios between them were calculated. These fermentations confirmed that total sulfide formation was strongly yeast strain-dependent, and high concentrations of yeast assimilable nitrogen did not necessarily protect against elevated H2S formation. High initial concentrations of ammonium ions via addition of diammonium phosphate (DAP) caused a higher evolution of H2S when compared with a non-supplemented but nondeficient juice. It was observed that the excess availability of a certain yeast assimilable amino acid, arginine, could result in a more sustained CO2 production rate throughout the wine fermentation. The contribution of yeast assimilable amino acids from conventional commercial yeast foods to lowering of the H2S formation was marginal.     

Discrepancy in glucose and fructose utilisation during fermentation by Saccharomyces cerevisiae wine yeast strains

While unfermented grape must contains approximately equal amounts of the two hexoses glucose and fructose, wine producers worldwide often have to contend with high residual fructose levels (>2 gl(-1)) that may account for undesirable sweetness in finished dry wine. Here, we investigate the fermentation kinetics of glucose and fructose and the influence of certain environmental parameters on hexose utilisation by wine yeast. Seventeen Saccharomyces cerevisiae strains, including commercial wine yeast strains, were evaluated in laboratory-scale wine fermentations using natural Colombard grape must that contained similar amounts of glucose and fructose (approximately 110 gl(-1) each). All strains showed preference for glucose, but to varying degrees. The discrepancy between glucose and fructose utilisation increased during the course of fermentation in a strain-dependent manner. We ranked the S. cerevisiae strains according to their rate of increase in GF discrepancy and we showed that this rate of increase is not correlated with the fermentation capacity of the strains. We also investigated the effect of ethanol and nitrogen addition on hexose utilisation during wine fermentation in both natural and synthetic grape must. Addition of ethanol had a stronger inhibitory effect on fructose than on glucose utilisation. Supplementation of must with assimilable nitrogen stimulated fructose utilisation more than glucose utilisation. These results show that the discrepancy between glucose and fructose utilisation during fermentation is not a fixed parameter but is dependent on the inherent properties of the yeast strain and on the external conditions.     

Occurrence and Growth of Killer Yeasts during Wine Fermentation

Sixteen wine fermentations were examined for the presence of killer yeasts. Killer property and sensitivity to killer action were found in isolates of Saccharomyces cerevisiae but not in isolates of Kloeckera, Candida, Hansenula, and Torulaspora spp. Several killer and killer-sensitive strains of S. cerevisiae were differentiated by colony morphology, and this property was used to monitor their growth kinetics in mixed cultures in grape juice. Killer-sensitive strains died off within 24 to 48 h during mixed-strain fermentation. Killer action was demonstrated at pH 3.0 and pH 3.5 and over the range of 15 to 25°C but depended on the proportion of killer to killer-sensitive cells at the commencement of fermentation. The dominance of killer strains in mixed-strain fermentations was reflected in the production of ethanol, acetic acid, and glycerol.     

Identification of genes affecting glucose catabolism in nitrogen-limited fermentation

In recognition of the importance of assimilable nitrogen in the successful completion of several fermentation processes, we have sought to develop yeast strains that utilise this typically limited nutrient group more efficiently. With the aid of transposon mutagenesis together with a high-throughput method for analysis of multiple fermentations, we have identified 'nitrogen-efficient' mutants that catabolise more sugar for a given amount of nitrogen utilised. In this way we have identified two genes, NGR1 and GID7, whose disruption leads to an enhanced catabolism of sugar in an industrial strain and/or a laboratory strain, during growth in a chemically defined grape juice medium with limiting nitrogen. Deletion of NGR1 or GID7 also resulted in minor changes in metabolites produced, and biomass yield, measured as dry weight, was also decreased in NGR1 mutant strains.     

Determination of killer yeast activity in fermenting grape juice by using a marked Saccharomyces wine yeast strain.

The Escherichia coli beta-glucuronidase gene has been used as a marker gene to monitor a killer Saccharomyces cerevisiae strain in mixed-culture ferments. The marked killer strain was cured of its M-dsRNA genome to enable direct assessment of the efficiency of killer toxin under fermentation conditions. Killer activity was clearly evident in fermenting Rhine Riesling grape juice of pH 3.1 at 18 degrees C, but the extent of killing depended on the proportion of killer to sensitive cells at the time of inoculation. Killer activity was detected only when the ratio of killer to sensitive cells exceeded 1:2. At the highest ratio of killer to sensitive cells tested (2:1), complete elimination of sensitive cells was not achieved.     

Determination of killer yeast activity in fermenting grape juice by using a marked Saccharomyces wine yeast strain.

The Escherichia coli beta-glucuronidase gene has been used as a marker gene to monitor a killer Saccharomyces cerevisiae strain in mixed-culture ferments. The marked killer strain was cured of its M-dsRNA genome to enable direct assessment of the efficiency of killer toxin under fermentation conditions. Killer activity was clearly evident in fermenting Rhine Riesling grape juice of pH 3.1 at 18 degrees C, but the extent of killing depended on the proportion of killer to sensitive cells at the time of inoculation. Killer activity was detected only when the ratio of killer to sensitive cells exceeded 1:2. At the highest ratio of killer to sensitive cells tested (2:1), complete elimination of sensitive cells was not achieved.     

Microsatellite PCR profiling of Saccharomyces cerevisiae strains during wine fermentation

AIMS: Use of microsatellite PCR to monitor populations of Saccharomyces cerevisiae strains during fermentation of grape juice. METHOD AND RESULTS: Six commercial wine strains of S. cerevisiae were screened for polymorphism at the SC8132X locus using a modified rapid PCR identification technique. The strains formed four distinct polymorphic groups that could be readily distinguished from one another. Fermentations inoculated with mixtures of three strains polymorphic at the SC8132X locus were monitored until sugar utilization was complete, and all exhibited a changing population structure throughout the fermentation. CONCLUSIONS: Rapid population quantification demonstrated that wine fermentations are dynamic and do not necessarily reflect the initial yeast population structure. One or more yeast strains were found to dominate at different stages of the fermentation. SIGNIFICANCE AND IMPACT OF THE STUDY: The population structure of S. cerevisiae during mixed culture wine fermentation is dynamic and could modify the chemical composition and flavour profile of wine.     

Occurrence of hydrogen sulfide in wine and in fermentation: influence of yeast strain and supplementation of yeast available nitrogen

Hydrogen sulfide (H₂S) is a powerful aroma compound largely produced by yeast during fermentation. Its occurrence in wines and other fermented beverages has been associated with off-odors described as rotten egg and/or sewage. While the formation of hydrogen sulfide (H₂S) during fermentation has been extensively studied, it is the final H₂S content of wine that is actually linked to potential off-odors. Nevertheless, factors determining final H₂S content of wine have received little attention, and it is commonly assumed that high H₂S-forming fermentations will result in high final concentrations of H₂S. However, a clear relationship has never been established. In this report, we investigated the contribution of yeast strain and nitrogen addition to H₂S formation during fermentation and its consequent occurrence the resulting wines. Five commercial Saccharomyces cerevisiae wine yeast strains were used to ferment a Chardonnay juice containing 110 mg/l of YAN (yeast assimilable nitrogen), supplemented with di-ammonium phosphate (DAP) to increase YAN concentration to moderate (260 mg/l) and high (410 mg/l) levels. In contrast to the widely reported decrease in H₂S production in response to DAP addition, a non-linear relationship was found such that moderate DAP supplementation resulted in a remarkable increase in H₂S formation by each of the five wine yeasts. H₂S content of the finished wine was affected by yeast strain, YAN, and fermentation vigor. However, we did not observe a correlation between concentration of H₂S in the finished wines and H₂S produced during fermentation, with low-forming fermentations often having relatively high final H₂S and vice versa. Management of H₂S in wine through nitrogen supplementation requires knowledge of initial YAN and yeast H₂S characteristics.     

The influence of nitrogen and biotin interactions on the performance of Saccharomyces in alcoholic fermentations

AIM: To study the impact of assimilable nitrogen, biotin and their interaction on growth, fermentation rate and volatile formation by Saccharomyces. METHODS AND RESULTS: Fermentations of synthetic grape juice media were conducted in a factorial design with yeast assimilable nitrogen (YAN) (60 or 250 mg l(-1)) and biotin (0, 1 or 10 microg l(-1)) as variables. All media contained 240 g l(-1) glucose + fructose (1 : 1) and were fermented using biotin-depleted Saccharomyces cerevisiae strains EC1118 or UCD 522. Both strains exhibited weak growth and sluggish fermentation rates without biotin. Increased nitrogen concentration resulted in higher maximum fermentation rates, while adjusting biotin from 1 to 10 microg l(-1) had no effect. Nitrogen x biotin interactions influenced fermentation time, production of higher alcohols and hydrogen sulfide (H(2)S). Maximum H(2)S production occurred in the medium containing 60 mg l(-1) YAN and 1 microg l(-1) biotin. CONCLUSIONS: Nitrogen x biotin interactions affect fermentation time and volatile production by Saccharomyces depending on strain. Biotin concentrations sufficient to complete fermentation may affect the organoleptic impact of wine. SIGNIFICANCE AND IMPACT OF THE STUDY: This study demonstrates the necessity to consider nutrient interactions when diagnosing problem fermentations.     

Assimilable nitrogen utilisation and production of volatile and non-volatile compounds in chemically defined medium by <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> wine yeasts

Surveys conducted worldwide have shown that a significant proportion of grape musts are suboptimal for yeast nutrients, especially assimilable nitrogen. Nitrogen deficiencies are linked to slow and stuck fermentations and sulphidic off-flavour formation. Nitrogen supplementation of grape musts has become common practice; however, almost no information is available on the effects of nitrogen supplementation on wine flavour. In this study, the effect of ammonium supplementation of a synthetic medium over a wide range of nitrogen values on the production of volatile and non-volatile compounds by two high-nitrogen-demand wine fermentation strains of Saccharomyces cerevisiae was determined. To facilitate this investigation, a simplified chemically defined medium that resembles the nutrient composition of grape juice was used. Analysis of variance revealed that ammonium supplementation had significant effects on the concentration of residual sugar, L-malic acid, acetic acid and glycerol but not the ethanol concentration. While choice of yeast strain significantly affected half of the aroma compounds measured, nitrogen concentrations affected 23 compounds, including medium-chain alcohols and fatty acids and their esters. Principal component analysis showed that branched-chain fatty acids and their esters were associated with low nitrogen concentrations, whereas medium-chain fatty esters and acetic acid were associated with high nitrogen concentrations.     

Monitoring of killer yeast populations in mixed cultures: influence of incubation temperature of microvinifications samples

Killer yeasts are frequently used to combat and prevent contamination by wild-type yeasts during wine production and they can even dominate the wine fermentation. Stuck and sluggish fermentations can be caused by an unbalanced ratio of killer to sensitive yeasts in the bioreactor, and therefore it is important to determine the proportion of both populations. The aim of this study was to provide a simple tool to monitor killer yeast populations during controlled mixed microvinifications of killer and sensitive Saccharomyces cerevisiae. Samples were periodically extracted during vinification, seeded on Petri dishes and incubated at 25 and 37?°C; the latter temperature was assayed for possible inactivation of killer toxin production. Colonies developed under the described conditions were randomly transferred to killer phenotype detection medium. Significant differences in the killer/sensitive ratio were observed between both incubation temperatures in all microvinifications. These results suggest that 37?°C seems a better option to determine the biomass of sensitive yeasts, in order to avoid underestimation of sensitive cells in the presence of killer yeasts during fermentations. Incubation at a toxin-inhibiting temperature clearly showed the real ratio of killer to sensitive cells in fermentation systems.     

Evaluation of yeast diversity during wine fermentations with direct inoculation and pied de cuve method at an industrial scale

The diversity and composition of yeast populations may greatly impact wine quality. This study investigated the yeast microbiota in two different types of wine fermentations: direct inoculation of a commercial starter versus pied de cuve method at an industrial scale. The pied de cuve fermentation entailed growth of the commercial inoculum used in the direct inoculation fermentation for further inoculation of additional fermentations. Yeast isolates were collected from different stages of wine fermentation and identified to the species level using Wallersterin Laboratory nutrient (WLN) agar followed by analysis of the 26S rDNA D1/D2 domain. Genetic characteristics of the Saccharomyces cerevisiae strains were assessed by a rapid PCR-based method, relying on the amplification of interdelta sequences. A total of 412 yeast colonies were obtained from all fermentations and eight different WL morphotypes were observed. Non-Saccharomyces yeast mainly appeared in the grape must and at the early stages of wine fermentation. S. cerevisiae was the dominant yeast species using both fermentation techniques. Seven distinguishing interdelta sequence patterns were found among S. cerevisiae strains, and the inoculated commercial starter, AWRI 796, dominated all stages in both direct inoculation and pied de cuve fermentations. This study revealed that S. cerevisiae was the dominant species and an inoculated starter could dominate fermentations with the pied de cuve method under controlled conditions.     

Mixed culture of killer and sensitive Saccharomyces cerevisiae strains in batch and continuous fermentations

This paper presents a kinetic study of the dynamics of the population of two Saccharomyces cerevisiae strains (designated K1 and 522D) in mixed culture. These two strains are commonly used in wine making. The K1 strain (killer yeast) secretes a glycoprotein (killer toxin) which causes the death of the 522D strain (sensitive yeast). Initially, the mixed cultures were realized in batch fermentations. Initial concentrations of killer yeast were 5 and 10% of the total population. The influence of the killer strain on the sensitive cultures was measured in comparison with a reference fermentation. The reference fermentation was inoculated only with the sensitive strain. Results show that an initial concentration of 10% of killer strain affects the microbial population balance and the rate of ethanol production. However the fermentation was only slightly disturbed when the proportion of killer to sensitive yeast at the beginning of mixed culture was 5%. To achieve total displacement by the killer yeast at low concentrations, the mixed cultures were carried out in a continuous system. The results obtained in continuous fermentations with the same strains have shown that a level of contamination as low as 0.8% of killer strain was sufficient to completely displace the original sensitive population after 150 h incubation.     

Mixed culture of killer and sensitive Saccharomyces cerevisiae strains in batch and continuous fermentations

This paper presents a kinetic study of the dynamics of the population of two Saccharomyces cerevisiae strains (designated K1 and 522D) in mixed culture. These two strains are commonly used in wine making. The K1 strain (killer yeast) secretes a glycoprotein (killer toxin) which causes the death of the 522D strain (sensitive yeast). Initially, the mixed cultures were realized in batch fermentations. Initial concentrations of killer yeast were 5 and 10% of the total population. The influence of the killer strain on the sensitive cultures was measured in comparison with a reference fermentation. The reference fermentation was inoculated only with the sensitive strain. Results show that an initial concentration of 10% of killer strain affects the microbial population balance and the rate of ethanol production. However the fermentation was only slightly disturbed when the proportion of killer to sensitive yeast at the beginning of mixed culture was 5%. To achieve total displacement by the killer yeast at low concentrations, the mixed cultures were carried out in a continuous system. The results obtained in continuous fermentations with the same strains have shown that a level of contamination as low as 0.8% of killer strain was sufficient to completely displace the original sensitive population after 150 h incubation.     

A novel methodology independent of fermentation rate for assessment of the fructophilic character of wine yeast strains

The yeast Saccharomyces cerevisiae has a fundamental role in fermenting grape juice to wine. During alcoholic fermentation its catabolic activity converts sugars (which in grape juice are a near equal ratio of glucose and fructose) and other grape compounds into ethanol, carbon dioxide and sensorily important metabolites. However, S. cerevisiae typically utilises glucose and fructose with different efficiency: glucose is preferred and is consumed at a higher rate than fructose. This results in an increasing difference between the concentrations of glucose and fructose during fermentation. In this study 20 commercially available strains were investigated to determine their relative abilities to utilise glucose and fructose. Parameters measured included fermentation duration and the kinetics of utilisation of fructose when supplied as sole carbon source or in an equimolar mix with glucose. The data were then analysed using mathematical calculations in an effort to identify fermentation attributes which were indicative of overall fructose utilisation and fermentation performance. Fermentation durations ranged from 74.6 to over 150 h, with clear differences in the degree to which glucose utilisation was preferential. Given this variability we sought to gain a more holistic indication of strain performance that was independent of fermentation rate and therefore utilized the area under the curve (AUC) of fermentation of individual or combined sugars. In this way it was possible to rank the 20 strains for their ability to consume fructose relative to glucose. Moreover, it was shown that fermentations performed in media containing fructose as sole carbon source did not predict the fructophilicity of strains in wine-like conditions (equimolar mixture of glucose and fructose). This work provides important information for programs which seek to generate strains that are faster or more reliable fermenters.     

The vinification of partially dried grapes: a comparative fermentation study of Saccharomyces cerevisiae strains under high sugar stress

AIMS: The study of the fermentation performance of Saccharomyces cerevisiae strains under high sugar stress during the vinification of partially dried grapes. METHODS AND RESULTS: Microvinification of partially dried grape must with sugar concentration of 35 degrees Brix was performed using four commercial strains to carry out alcoholic fermentation. A traditional red vinification without nutrients addition was applied. Yeasts displayed different efficiency to convert sugar in ethanol and varied in glycerol yield. Sugar consumption and ethanol level were attested at 80-87% and 143.5-158.0 g l(-1) respectively. High correlation between sugar and assimilable nitrogen consumption rate was observed. Statistical treatment of data by principal component analysis highlighted the different behaviours that strains exhibited in regard to the production of higher alcohols and other compounds important to wine quality. CONCLUSIONS: Saccharomyces cerevisiae strains displayed appreciable capability to overcome osmotic stress and to yield ethanol fermenting high sugar concentration grape must in winemaking condition. SIGNIFICANCE AND IMPACT OF THE STUDY: The results provided insights on the strain contribution to wine quality subordinate to stress condition. This investigation is of applicative interest for winemaking and processing industry that use high sugar concentration musts.     

Effect of low-temperature fermentation on yeast nitrogen metabolism

The aim of this study was to analyse the influence of low-temperature wine fermentation on nitrogen consumption and nitrogen regulation. Synthetic grape must was fermented at 25 and 13°C. Low-temperature decreased both the fermentation and the growth rates. Yeast cells growing at low-temperature consumed less nitrogen than at 25°C. Specifically, cells at 13°C consumed less ammonium and glutamine, and more tryptophan. Low-temperature seemed to relax the nitrogen catabolite repression (NCR) as deduced from the gene expression of ammonium and amino acid permeases (MEP2 and GAP1) and the uptake of some amino acids subjected to NCR (i.e. arginine and glutamine). Low-temperature influences the quantity and the quality of yeast nitrogen requirements. Nitrogen-deficient grape musts and low temperature are two of the main prevalent causes of sluggish fermentations and, therefore, the effects of both growth conditions on yeast metabolism are of considerable interest for wine making.     

Metabolic profiling as a tool for revealing Saccharomyces interactions during wine fermentation

The multi-yeast strain composition of wine fermentations has been well established. However, the effect of multiple strains of Saccharomyces spp. on wine flavour is unknown. Here, we demonstrate that multiple strains of Saccharomyces grown together in grape juice can affect the profile of aroma compounds that accumulate during fermentation. A metabolic footprint of each yeast in monoculture, mixed cultures or blended wines was derived by gas chromatography - mass spectrometry measurement of volatiles accumulated during fermentation. The resultant ion spectrograms were transformed and compared by principal-component analysis. The principal-component analysis showed that the profiles of compounds present in wines made by mixed-culture fermentation were different from those where yeasts were grown in monoculture fermentation, and these differences could not be produced by blending wines. Blending of monoculture wines to mimic the population composition of mixed-culture wines showed that yeast metabolic interactions could account for these differences. Additionally, the yeast strain contribution of volatiles to a mixed fermentation cannot be predicted by the population of that yeast. This study provides a novel way to measure the population status of wine fermentations by metabolic footprinting.     

Managing high-density commercial scale wine fermentations

AIMS: To investigate the effects of grape juice dilution and different temperature/nitrogen addition regimes on commercial-scale, high-density Shiraz and Chardonnay fermentations. METHODS AND RESULTS: Duplicated fermentations (30 hl) were conducted at two temperatures for Shiraz and for Chardonnay. Two additional tanks of Chardonnay and Shiraz were diluted. Nitrogen was added once at inoculation or in aliquots over several days. Yeast concentration and viability was determined by flow cytometry. Fermentation chemistry was monitored by Fourier transform infrared spectroscopy. Fermentations arrested in both of the undiluted, higher temperature duplicate tanks of Shiraz. Different fermentation temperature resulted in sensorially different Shiraz, but not Chardonnay, wines made from undiluted musts. The converse was observed for wines made from diluted musts. CONCLUSIONS: High-density musts can be fermented completely using reduced fermentation temperature coupled with incremental nitrogen addition. SIGNIFICANCE AND IMPACT OF THE STUDY: This is the first study in duplicated, commercial-scale, high-density grape juice fermentations to address temperature, nitrogen addition, and juice dilution effects on stuck fermentation potential and wine sensory properties.     

Nitrogen demand of different yeast strains during alcoholic fermentation. Importance of the stationary phase

The nitrogen demand of industrial yeast strains were compared. Substantial differences were found between strains. These did not change regardless of the initial medium composition and added nitrogen source. To separately study growth and stationary phases, we ran fermentations with different nitrogen feeding profiles: a) exponentially fed fermentations with a long growth phase, and b) constant rate fermentations with nitrogen addition during the stationary phase. Differences between stains mostly appeared during the second phase. Measuring nitrogen requirements under such conditions would thus be an interesting complementary test when selecting new strains especially for enological purposes since most fermentation kinetics are nitrogen limited.