Crystal and molecular structure of the amylose–DMSO complex

The crystal and molecular structure of the complex of amylose with dimethyl sulfoxide has been studied by a combination of stereochemical analysis, potential energy, and X-ray diffraction methods. The complex crystallizes in a pseudotetragonal unit cell with a = b = 19.17 Å and c (fiber axis) = 24.39 Å, with two antiparallel chains per unit cell and space group P2₁2₁2₁. The amylose chain is a left-handed 6₁(1.355) helix with three turns per crystallographic repeat. The O(6) rotational position is approximately gt. Dimethyl sulfoxide is located inside the helix with one DMSO molecule for every three glucose residues. An additional four DMSO molecules and eight water molecules each are located in the large interstices between chains, and it is the interaction of these molecules with the helix that results in the pseudotetragonal chain packing. The interstitial DMSO is the source of the previously reported additional layer lines, which are not consistent with the 8.13-Å amylose repeat distance. The final R factor for the layers with amylose contribution to the structure factors was 0.29, while the overall R factor was 0.35. The stereochemical packing analysis provided suitable phasing models for the subsequent X-ray refinement.     

X‐ray crystal structure of anhydrous chitosan at atomic resolution

We determined the crystal structure of anhydrous chitosan at atomic resolution, using X‐ray fiber diffraction data extending to 1.17 Å resolution. The unit cell [a = 8.129(7) Å, b = 8.347(6) Å, c = 10.311(7) Å, space group P2₁2₁2₁] of anhydrous chitosan contains two chains having one glucosamine residue in the asymmetric unit with the primary hydroxyl group in the gt conformation, that could be directly located in the Fourier omit map. The molecular arrangement of chitosan is very similar to the corner chains of cellulose II implying similar intermolecular hydrogen bonding between O6 and the amine nitrogen atom, and an intramolecular bifurcated hydrogen bond from O3 to O5 and O6. In addition to the classical hydrogen bonds, all the aliphatic hydrogens were involved in one or two weak hydrogen bonds, mostly helping to stabilize cohesion between antiparallel chains. © 2016 Wiley Periodicals, Inc. Biopolymers 105: 361–368, 2016.     

Crystalline structure in oriented fibers of KBr–amylose

The study of the structure of KBr–amylose begun by Senti and Witnauer has been extended by a three-dimensional crystallographic analysis and by stereochemical considerations. Location of Br^? at (0.200, 0.200, 0.000) and K⁺ at (0.540, 0.540, 0.000) was obtained from the three-dimensional map of vector interactions. By using known parameters for the D -glucose residue and accurate space-filling models, an amylose helix was constructed to meet the fiber repeat spacing of 16.1 Å. The helix was determined to be left-handed, and the correct space group for KBr–amylose is P4₃ 2₁2. Placement of the helix in the unit cell resulted from structure factor calculations; minima in the grid of R values were checked with space-filling models to establish the final structure. Both ions are located in a waterlike environment. The oxygen atoms O(2), O(3), and O(4) from glucose residues on adjacent chains coordinate around K⁺.     

X-Ray diffraction of ethylenediamine–amylose complex

Solutions of amylose in ethylenediamine yield a crystalline film complex upon evaporation of solvent. The x-ray analysis indicates the presence of a tetragonal-shaped cell with a symmetry approximating that of space group P2₁2₁2₁. The amylose sixfold helix has a diameter of 13.3 Å and a translation period of 8.0Å. Chemical and physical analyses support a complexing ratio of one ethylenediamine molecule to every two glucose units. The structure is nearly identical to any amylose–dimethyl sulfoxide complex previously examined. The square mode of packing arrangement appears to result from complexation between amylose chains. Such complexing indicates a much greater degree of amylose interaction than is observed in amylose complex structures having a hexagonal close-packing arrangement.     

The V amylose–H2O system: Structural changes resulting from hydration

X-ray diffraction and stereochemical analyses were used to study the hydrated structure of the helical amylose polymorph having a fiber repeat spacing of 8 Å. Intensity calculations using computer models confirmed six as the number of residues per turn and supported the space group P2₁2₁2₁. Both diffraction intensity and stereochemical methods indicate the suitability of residue G3 from the potassium acetate complex of cyclohexaamylose as opposed to residues with longer O(4)–O(1) vectors. Comparison of the present results with those obtained for V amylose dehydrate indicated no major conformational differences between the two helix skeletons. A net helical rotation of approximately 30° accompanied the hydrate–dehydrate transition and the rotational position in the hydrate allowed packing that was less close. Hydration water molecules were not located; noncarbohydrate peaks on the electron density maps were primarily due to Fourier series termination errors.     

Crystal and molecular structure of V-anhydrous amylose

The conformation and crystalline packing of V-anhydrous amylose has been investigated by a combination of linked atom model building and X-ray diffraction analysis. The unit cell, the P2₁2₁2₁ space group, the left-handed sixfold helical conformation with all O(6) in gt rotational positions, and the intrahelical O(2)---O(3) and O(2)---O(6) hydrogen bonds are substantially in agreement with previous studies. A new model for packing of the chains in the unit cell and the presence of crystallographic water is proposed. Packing appears to be stabilized by corner-to-center chain O(2)---O(2) hydrogen bonds. The nature of the transition from the amylose–DMSO complex to V_a-amylose was considered and it is shown that the transition involves translation of the amylose chains parallel to the a and b unit cell axes with only slight changes in the orientation of the helix. No significant conformational changes result from the transition.     

Experimental conformational study of two peptides containing α-aminoisobutyric acid. Crystal structure of N-acetyl-α-aminoisobutyric acid methylamide

Some theoretical studies have predicted that the conformational freedom of the α-aminoisobutyric acid (H-Aib-OH) residue is restricted to the α-helical region of the Ramachandran map. In order to obtain conformational experimental data, two model peptide derivatives, MeCO-Aib-NHMe 1 and Bu^tCO-LPro-Aib-NHMe 2 , have been investigated. The Aib dipeptide 1 crystallizes in the monoclinic system (a = 12.71 Å, b = 10.19 Å, c = 7.29 Å, β = 110.02°, Cc space group) and its crystal structure was elucidated by x-ray diffraction analysis. The azimuthal angles depicting the molecular conformation (? = ?55.5°, ψ = ?39.3°) fall in the α-helical region of the Ramachandran map and molecules are hydrogen-bonded in a three-dimensional network. In CCl₄ solution, ir spectroscopy provides evidence for the occurrence of the so-called ₅ and C₇ conformers stabilized by the intramolecular i → i and i + 2 → i hydrogen bonds, respectively. The tripeptide 2 was studied in various solvents [CCl₄, CD₂Cl₂, CDCl₃, (CD₃)₂SO, and D₂O] by ir and pmr spectroscopies. It was shown to accommodate predominantly the βII folded state stabilized by the i + 3 → i hydrogen bond. All these experimental findings indicate that the Aib residue displays the same conformational behavior as the other natural chiral amino acid residues.     

α,β-Dehydro-amino acid residues in the design of peptide structures: Synthesis,crystal structure,and molecular conformation of two homologous peptides—N-Ac-Dehydro-Phe-L-Leu-OCH3 and N-Ac-Dehydro-Phe-NorVal-OCH3

The dehydro-residue containing peptides N-Ac-dehydro-Phe-L -Leu-OCH₃ ( I ) and N-Ac-dehydro-Phe-NorVal-OCH₃ ( II ) were synthesized by the usual workup procedures. The peptides crystallize from their solutions in methanol in space group P6₅: ( I ) a = b = 12.528(2) Å, c = 21.653(5) Å; ( II ) a = b = 12.532(2) Å, c = 21.695(4) Å. The structures were determined by direct methods. Both peptides adopt similar conformations with ?,ψ of dehydro-Phe as follows: ( I ) ?57.0(5)° and ?37.0(5)°; ( II ) ?56.0(5),° and ?37.5(5)°. The observed data on dehydro-Phe when placed at the (i + 1) position show that the ?,ψ values of dehydro-Phe are either ?60°, 140° or ?60°, ?30°. The conformation of ?60°, 140° can be accommodated only with a flexible residue at the (i + 2) position while the ?,ψ values of ?60°, ?30° are obtained with a bulky residue at the (i + 2) position as in the present structures. The molecules are packed in a helical way along the c axis. These are held by two strong intermolecular hydrogen bonds involving both NH as donors and acetyl group and dehydro-Phe oxygen atoms as acceptors. © 1994 John Wiley & Sons, Inc.     

Stereochemistry of Schellman motifs in peptides: Crystal structure of a hexapeptide with a C‐terminus 6 → 1 hydrogen bond

The Schellman motif is a widely observed helix terminating structural motif in proteins, which is generated when the C‐terminus residue adopts a left‐handed helical (α_L) conformation. The resulting hydrogen‐bonding pattern involves the formation of an intramolecular 6 → 1 interaction. This helix terminating motif is readily mimicked in synthetic helical peptides by placing an achiral residue at the penultimate position of the sequence. Thus far, the Schellman motif has been characterized crystallographically only in peptide helices of length 7 residues or greater. The structure of the hexapeptide Boc–Pro–Aib–Gly–Leu–Aib–Leu–OMe in crystals reveal a short helical stretch terminated by a Schellman motif, with the formation of 6 → 1 C‐terminus hydrogen bond. The crystals are in the space group P2₁2₁2₁ with a = 18.155(3) Å, b = 18.864(8) Å, c = 11.834(4) Å, and Z = 4 . The final R₁ and wR₂ values are 7.68 and 14.6%, respectively , for 1524 observed reflections [F_o ≥ 3ς(F_o)]. A 6 → 1 hydrogen bond between Pro(1)CO · · · Leu(6)NH and a 5 → 2 hydrogen bond between Aib(2)CO · · · Aib(5)NH are observed. An analysis of the available oligopeptides having an achiral Aib residue at the penultimate position suggests that chain length and sequence effects may be the other determining factors in formation of Schellman motifs. © 1999 John Wiley & Sons, Inc. Biopoly 50: 13–22, 1999     

Structural components of alginic acid. II. The crystalline structure of poly-alpha-L-guluronic acid. Results of x-ray diffraction and polarized infrared studies

A structural investigation of the marine algal polysaccharide poly-α-L -guluronic acid is described. The molecular chains consist of 1 → 4 diaxially linked L -guluronic acid residues in the 1C chair conformation and are stabilized in a twofold helix conformation by an intra-molecular O(2)H … O(6)D hydrogen-bond. The X-ray fiber diffraction photograph has been indexed to an orthorhombic unit cell in which a = 8.6 Å, b (fiber axis) = 8.7 Å, c = 10.7 Å. A structure corresponding to the space group P2₁2₁2₁ is proposed, in which all intermolecular hydrogen bonds interact with water molecules and in which all oxygen atoms except for the inaccessible bridge oxygens are involed. The relationship between the shape and structure of the polyguluronic acid molecule and its biological function is discussed.     

Accommodation of a D-Phe residue into a right-handed 310-helix: Structure of Boc-D-Phe-(Aib)4-Gly-L-Leu-(Aib)2-Ome,an analogue of the amino terminal segment of antiamoebins and emerimicins

The crystal structure of the nonapeptide Boc-D -Phe-Aib-Aib-Aib-Aib-Gly-Leu-Aib-AibOMe (I), which is an analogue of the N-terminal sequence of antiamoebins and emerimicins, establishes a completely 3₁₀-helical conformation with seven successive intramolecular 4 → 1 hydrogen bonds. The average, ?, ψ values for residues 1–8 are ?59° and ?32°, respectively. Crystal parameters are C₄₇H₇₇N₉O₁₂, space group P1, a = 10.636(4) Å, b = 11.239(4) Å, c = 12.227(6) Å, α = 101.17(4)°, β = 97.22(4)°, γ = 89.80(3)°, Z = 1, R = 5.95% for 3018 data with |F₀| > 3α(F), resolution 0.93 Å. The use of the torsion angle κ = C(i ? 1)N(i)C^α(i)C^β(i), where κ = 68° for D -Phe and κ = 164° for L -Leu, confirms the opposite configurations of these residues. The ?, ψ values of ?62° and ?32° at D -Phe are unusual, since this region is characteristic of residues with L configurations. Peptide I possesses only two chiral residues of opposing configuration. The observed right-handed 3₁₀-helical structure suggests that helix sense has probably been determined by the stereo-chemical preferences of the Leu residue. © 1993 John Wiley & Sons, Inc.     

Design of Peptides Using α,β-Dehydro-residues: Synthesis,Crystal Structure and Molecular Conformation of N-Boc-L-Val-ΔPhe–ΔPhe-L-Ala-OCH3

To obtain general rules of peptide design using α,β-dehydro-residues, a sequence with two consecutive ΔPhe-residues, Boc-L -Val-ΔPhe–ΔPhe- L -Ala-OCH₃, was synthesized by azlactone method in solution phase. The peptide was crystallized from its solution in an acetone/water mixture (70:30) in space group P6₁ with a=b=14.912(3) Å, c= 25.548(5) Å, V=4912.0(6) ų. The structure was determined by direct methods and refined by a full matrix least-squares procedure to an R value of 0.079 for 2891 observed [I?3σ(I)] reflections. The backbone torsion angles ?₁=?54(1)°, ψ₁= 129(1)°, ω₁=?177(1)°, ?₂ =57(1)°, ψ₂=15(1)°, ω₂ =?170(1)°, ?₃=80(1)°, ψ₃ =7(2)°, ω₃=?177(1)°, ?₄ =?108(1)° and ψ^T₄=?34 (1)° suggest that the peptide adopts a folded conformation with two overlapping β-turns of types II and III′. These turns are stabilized by two intramolecular hydrogen bonds between the CO of the Boc group and the NH of ΔPhe³ and the CO of Val¹ and the NH of Ala⁴. The torsion angles of ΔPhe² and ΔPhe³ side chains are similar and indicate that the two ΔPhe residues are essentially planar. The folded molecules form head-to- tail intermolecular hydrogen bonds giving rise to continuous helical columns which run parallel to the c-axis. This structure established the formation of two β-turns of types II and III′ respectively for sequences containing two consecutive ΔPhe residues at (i+2) and (i+3) positions with a branched β-carbon residue at one end of the tetrapeptide.     

An X-ray diffraction study of poly(L-lysine hydrobromide)

A structural study of the synthetic polypeptide poly(L -lysine hydrobromide) has been made by X-ray fiber techniques. The investigation was undertaken to determine whelther this polymer undergoes conformational transitions as a function of hydration in a manner similar to other chemically related basic polypeptides. Specifically, a comparison with the previously reported structures of the hydrochloride form of poly(L -lysine) was sought. Homogeneous powder mixtures with various amounts of water and oriented fibers of poly(L -lysine hydrobromide) at different relative humidities were X-ray photographed. Reversible transitions amorphous state ? β-pleated sheet ? α-helix ? isotropic solution as a function of increasing/decreasing degrees of hydration were found. The β-pleated-sheet conformation was observed between 33% and 76% relative humidities (containing about one and three molecules of water per residue, respectively). Each pleated sheet was formed by “antiparallel” chains, and the sheets were piled up along the b-axis. The spacings of this conformation did not vary appreciably with hydration. The observed reflections at 52% relative humidity (1.4 molecules of water per residue) could be indexed satisfactorily in terms of an orthorhombic unit cell, of space group P2₁22₁, with a = 9.52 Å, b = 16.44 Å, and c = 6.80 Å. These dimensions were shown by models to be compatible with the proposed structure. The α-helix conformation was present in specimens photographed at 76% relative humidity and up, and containing between three and fifteen molecules of water per residue. The helices were packed parallel to each other in a hexagonal array but randomly along or about their lengths. Increasing the hydration from five to fifteen molecules of water per residue causes the a-axis to increase from 16.9 to 20.8 Å. Twenty molecules of water per residue produced an isotropic solution. Despite some structural differences between the hydrobromide and hydrochloride forms it is concluded that the role played by the anions is mainly related to determining the water content levels at which conformational changes occur. Therefore, the anions do not significantly influence the prevailing conformation in this particular system, but might affect the packing arrangement of the polypeptide chains.     

Packing analysis of carbohydrates and polysaccharides. V. Crystal structures of two polymorphs of pachyman triacetate

The crystal structures of two polymorphic forms of pachyman triacetate, the fully acetylated derivative of a naturally occuring β-(1 → 3)-D -glucan, were determined by a combination of stereochemical and x-ray diffraction analysis. The two polymorphs could be obtained depending on the temperature and the degree of stretching of film specimens of the substance: polymorph I resulted from stretching 25–50% at 125°C and polymorph II resulted from further stretching to 300% at 215°C. Both polymorphs had previously been shown to have sixfold helical chain conformations, but of unequal pitch. Subsequent detailed structure refinement performed with bond lengths, bond angles, conformational angles, and helix-packing parameters as refinement variables, and the simultaneous minimization of packing and conformational energy and the crystallographic R-factor as refinement criteria, resulted in a complete determination of the two crystal structures. Pachyman triacetate I was found to be a right-handed helix packing with antiparallel polarity and space group P2₁2₁2₁ symmetry (unit-cell parameters a = 11.0, b = 19.0, c (fiber repeat) = 22.38 Å). The acetate groups were nearly planar and the O(2) and O(4) acetates were oriented in such a fashion that the carbonyl double-bond nearly eclipsed the corresponding C—H bond of the ring. The O(6) was in the tg position and its acetate was oriented in such a fashion that the bond sequence C(6)—O(6)—C(6C)—C(6M) was nearly trans-planar, with the carbonyl double-bond bisecting the tetrahedral angle formed by C(6) and its two hydrogens. The final R = 0.221. Pachyman triacetate II was similarly found to be a right-handed helix, but packing as a 50:50 mixture of parallel and antiparallel polarities (unit-cell parameters a = 11.49, b = 20.13, c (fiber repeat) = 18.6 Å). The acetate positions in pachyman triacetate II were substantially the same as in pachyman triacetate I. The final R for the 50:50 mixture was 0.234. Probable reasons for the change in packing polarities are discussed, as are the difficulties encountered in the structure refinement of acetate derivatives.     

An X-ray diffraction study of poly-L-homoarginine hydrochloride.

An X-ray study of the synthetic polypeptide poly(L -homoarginine hydrochloride) has been made to investigate whether, like the chemically related polypeptides poly(L -lysine hydrochloride), poly(L -arginine hydrochloride), and poly(L -ornithine hydrobromide), it can undergo conformational transitions merely from variations in its degree of hydration. X-ray photographs of powder and oriented specimens containing one to 15 molecules of water per L -homoarginine hydrochloride residue showed that this polymer forms only a β-pleated-sheet structure. The pleated sheets, formed by antiparallel polypeptide chains hydrogen-bonded to each other, are piled up along the b axis in an alternating sequence (“sandwich structure”). This structure did not appreciably change with variations of the degree of hydration, and the observed reflections at 56% relative humidity (1.8 molecules of water per residue) could be indexed satisfactorily in terms of a monoclinic unit cell, of space group P2₁, with a = 9.34 Å, b = 40.07 Å, c = 6.94 Å, and γ = 106°. These dimensions are shown by models to be compatible with the proposed structure, and the calculated density of 1.27 g/cm³ agrees well with the experimental value of 1.29 g/cm³. Removal of the last molecule of water results in a very diffuse pattern, while specimens containing 20 molecules of water per residue show only reflections due to water.     

The structure of native cellulose

Native cellulose has been shown to consist of a crystalline array of parallel chains, based on the X-ray diffraction data for specimens from the sea alga Valonia ventricosa. The unit cell is monoclinic with dimensions a = 16.34 Å, b = 15.72 Å, c = 10.38 Å (fiber axis), and β = 97.0°. The space group is P2₁ and the cell contains disaccharide segments of eight chains. Models containing chains with the same sense (parallel) or alternating sense (antiparallel) were refined against the intensity data using rigidbody least squares procedures. The results show a preference for a parallel chain structure with specific chain polarity with respect to the c axis. The refinement places the ? CH₂OH side chains approximately 20′ from the so-called tg conformation, with a result that an 02′? H…06 intramolecular bond is formed. The structure also contains an 03? H…05′ intramolecular bond and an 06? H…03 intermolecular bond along the a axis. All these bonds lie in the 020 planes, and the structure is an array of hydrogen-bonded sheets. A major consequence of this work is that regular chain folding can be ruled out and cellulose is seen as extended chain polymer single crystals.     

Three-dimensional structure of actinoxanthin. IV. A 2.5-Å resolution

The protein actinoxanthin (isolated from Actinomyces globisporus—molecular weight, 10,300; 107 amino acid residues) crystallizes in space group P2₁2₁2₁ with cell dimensions: a = 30.9 Å, b = 48.8 Å, c = 64.1 Å, and Z = 4. The three-dimensional structure of actinoxanthin was determined by the x-ray multiple isomorphous replacement method at 2.5-Å resolution. The molecule is kidney-shaped and has a well-defined cavity. Its characteristic features are the absence of α-helices and the presence of enhanced content of antiparallel β-structure (～55%). A cylinder-shaped formation of seven antiparallel β-strands comprises the main part of the protein structure. The established β-supersecondary structure is characterized by a three-dimensional topology similar to that of immunoglobulin domains, superoxide dismutase subunits, and azurin and plastocyanin proteins.     

Comparative structural studies of the first row early transition metal(III) chloride tetrahydrofuran solvates

Two compounds of empirical formula MCl₃- (THF)₃, M = V and Cr, have been characterized by single crystal X-ray studies. The VCl₃(THF)₃ molecule, which has a mer octahedral stereochemistry, crystallizes in the monoclinic space group P2₁/c with a= 8.847(2),b= 12.861(5),c= 15.134(3) Å, β = 91.94(2)°, V = 1721(1) ų and Z = 4. The V-Ci(1) and V-CI(2) distances have a mean value of 2.330 [3] Å while V-CI(3) = 2.297(2) Å, The VO(1) and VO(2) distances have a mean value of 2.061[8] Å while V-O(3) = 2.102(3) Å cis ClVCl angles average 92.0[5]° and cis OVO angles average 86.2[2]° . The isostmctural complex, CrCl₃(THF)₃, has a crystal structure made up of discrete octahedral mer-CrCl₃(THF)₃ molecules with the following unit cell dimensions (space group P2₁/c): a = 8.715(1), b= 12.786(3), c = 15.122(3) Å, β = 92.15(1)°, V = 1684(1) ų and Z = 4. The CrCl(1) and CrCl(2) distances have a mean value of 2.310131 Å while CrCl(3) = 2.283(2) Å. The CrO(1) and CrO(2) distances have a mean value of 2.0101171 Å while CrO(3) = 2.077(4) Å. cis ClCrCl angles average 90.9[4]° and cis OCrO angles average 86.1 [2]°. The structures of these two octahedral complexes and those previously reported for ScCl₃(THF)₃ and TiCl₃(THF)₃ are compared and certain general trends are discussed.     

Solid state and solution conformations of a helical peptide with a central gly-gly segment

The influence of amino acids with contrasting conformational tendencies on the stereochemistry of oligopeptides has been investigated using an octapeptide Boc-Leu-Aib-Val-Gly-Gly-Leu-Aib-Val-OMe, which contains two helix-promoting Aib residues and a central helix-destabilizing Gly-Gly segment. Single crystal x-ray diffraction studies reveal that a 3 ₁₀-helix is formed up to the penultimate Aib residue, at which point there is a helix reversal in the backbone, reminiscent of a C-terminal 6 → I hydrogen bond. The curious feature in the crystal is the solvation of the possible 6 → 1 bond by a CH₃OH molecule, where the OH is inserted between O(3) and N(8) and participates in hydrogen bonds with both. The cell parameters are as follows: space group P2₁2₁2₁, a = 10.649(4) Å, b = 15.694(5) Å, c = 30.181(8) Å, R = 6.7% for 3427 data (| F₀| > 3σF) observed to 0.9 Å. Nuclear magnetic resonance studies in CDCl₃ using NH group solvent accessibility and nuclear Overhauser effects as probes are consistent with a 3 ₁₀-helical conformation. In contrast, in (CD₃)₂SO, unfolding of the central segment results in a multiple β-turn structure, with β-turn conformations populated at residues 1–2, 3–4, and 6–7. CD studies in methanol-2,2,2-trifluoroethanol (TFE) mixtures also provide evidence for a solvent-dependent structural transition. Helical conformations are populated in TFE, while type II β-turn structures are favored in methanol. © 1996 John Wiley & Sons, Inc.     

Characterization of a type of β‐bend ribbon spiral generated by the repeating (Xaa–Yaa–Aib–Pro) motif: The solution structure of harzianin HC IX,a 14‐residue peptaibol forming voltage‐dependent ion channels

The three‐dimensional solution structure of harzianin HC IX, a peptaibol antibiotic isolated from the fungus Trichoderma harzianum, was determined using CD, homonuclear, and heteronuclear two‐dimensional nmr spectroscopy combined with molecular modeling. This 14‐residue peptide, Ac Aib¹ Asn² Leu³ Aib⁴ Pro⁵ Ala⁶ Ile⁷ Aib⁸ Pro⁹ Iva¹⁰ Leu¹¹ Aib¹² Pro¹³ Leuol¹⁴ (Aib, α‐aminoisobutyric acid; Iva, isovaline; Leuol, leucinol), is a main representative of a short‐sequence peptaibol class characterized by an acetylated N‐terminus, a C‐terminal amino alcohol, and the presence of three Aib‐L ‐Pro motifs at positions 4–5, 8–9, and 12–13, separated by two dipeptide units. In spite of a lower number of residues, compared to the 18/20‐residue peptaibols such as alamethicin, harzianin HC IX exhibits remarkable membrane‐perturbing properties. It interacts with phospholipid bilayers, increasing their permeability and forming voltage‐gated ion channels through a mechanism slightly differing from that proposed for alamethicin. Sequence‐specific ¹H‐ and ¹³C‐nmr assignments and conformational nmr parameters (³J_NHCαH coupling constants, quantitative nuclear Overhauser enhancement data, temperature coefficients of amide and carbonyl groups, NH–ND exchange rates) were obtained in methanol solution. Sixty structures were calculated based on 98 interproton distance restraints and 6 Φ dihedral angle restraints, using high temperature restrained molecular dynamics and energy minimization. Thirty‐seven out of the sixty generated structures were consistent with the nmr data and were convergent. The peptide backbone consists in a ribbon of overlapping β‐turns twisted into a continuous spiral from Asn² to Leuol¹⁴ and forming a 26 Å long helix‐like structure. This structure is slightly amphipathic, with the three Aib–Pro motifs aligned on the less hydrophobic face of the spiral where the Asn² side chain is also present, while the more hydrophobic bulky side chains of leucines, isoleucine, isovaline, and leucinol are located on the concave side. The repetitive (Xaa–Yaa–Aib–Pro) tetrapeptide subunit, making up the peptide sequence, is characterized by four sets of (Φ,Ψ) torsional angles, with the following mean values: Φ_i = −90°, Ψ_i = −27°; Φ_i+1 = −98°, Ψ_i+1 = −17°; Φ_i+2 = −49°, Ψ_i+2 = −50°; Φ_i+3 = −78°, Ψ_i+3 = +3°. We term this particular structure, specifically occurring in the case of (Xaa–Yaa–Aib–Pro)_n sequences, the (Xaa–Yaa–Aib–Pro)‐β‐bend ribbon spiral. It is stabilized by 4 → 1 intramolecular hydrogen bonds and differs from both the canonical 3₁₀‐helix made of a succession of type III β‐turns and from the β‐bend ribbon spiral that has been described in the case of (Aib–Pro)n peptide segments. © 1999 John Wiley & Sons, Inc. Biopoly 50: 71–85, 1999