Immobilization of Rhizomucor miehei lipase onto montmorillonite K-10 and polyvinyl alcohol gel

Abstract

Immobilization of enzymes from different sources on various supports in designed systems increases enzymes’ stability by protecting the active site of it from undesired effect of reaction environment. Also, immobilization decreases the cost of separation and facilities the reuse of the enzymes. Therefore, the design of new immobilization enzyme preparations has been an inevitable area of modern biotechnology. Herein, Rhizomucor miehei lipase (RML) was immobilized on montmorillonite K-10 (MMT-RML) by adsorption and in polyvinyl alcohol (PVA-RML) by entrapment to obtain a more stable and active lipase preparation. The free and immobilized lipase preparations were characterized for p-nitrophenyl palmitate hydrolysis. The apparent Michaelis–Menten (K_mapp) constant was almost the same for the free RML and PVA-RML, whereas the corresponding value was 17.7-fold lower for MMT-RML. PVA-RML and MMT-RML have shown a 1.1 and 23.8 folds higher catalytic efficiency, respectively, than that of the free RML. The half-lives of PVA-RML and MMT-RML were found to be 7.4 and 3.4 times longer than the free RML at 35?°C, respectively. PVA-RML and MMT-RML maintained 65% and 87% of their initial activities after four reuses. These results showed that the catalytic performance of RML has improved significantly by immobilization.     

Enzymatic hydrolysis of racemic ibuprofen esters using Rhizomucor miehei lipase immobilized on different supports

This research describes the immobilization of Rhizomucor miehei lipase (RML) and chemically aminated RML (NH₂-RML) on different supports including octyl-sepharose (octyl-RML), activated sepharose with cyanogen bromide (CNBr-RML and CNBr-NH₂-RML), glyoxyl sepharose (Gx-RML and Gx-NH₂-RML) and glyoxyl sepharose dithiothreitol (Gx-DTT-RML and Gx-DTT-NH₂-RML). The highest immobilization yield was achieved for octyl-RML (>98%) followed by CNBr-RML (88%). Octyl-RML had the most specific activity (13.6) among all derivatives. The other preparations had moderate activities likely because of chemical reaction during covalent attachment of the enzyme. The catalytic behavior of lipase immobilized in hydrolysis reactions was investigated using methyl, ethyl, propyl, butyl and isobutyl-ibuprofen esters and the influence of the alkyl chain and the alcoholic residue of the ester were studied. Butyl ester was the most interesting ester for carrying out hydrolysis. The highest enantioselectivity of enzyme (E = 8.8) was obtained with isooctane/sodium phosphate buffer pH 7.0 at temperature of 40 °C. Increasing temperature from 40 to 50 °C caused decreasing in enantioselectivities and conversions. Also esterification of ibuprofen was carried out in solvent systems containing isooctane and two ionic liquids (ILs); [BMIM][PF₆] and [BMIM][BF₄]. Poor conversions and enantioselectivities were observed during esterification in all solvents.     

Modelling on isoamyl isovalerate synthesis from Rhizomucor miehei lipasein organic media: optimization studies

Immobilized lipase from Rhizomucor miehei (Lipozyme IM-20) was employed in the esterification of isovaleric acid and isoamyl alcohol to synthesize isoamyl isovalerate in n-heptane. Response surface methodology (RSM) based on a five-level, five-variable central composite rotatable design (CCRD) was used to evaluate the effects of important variables: enzyme concentration (20–40% w/w of acid), acid concentration (0.2–1.0 M), incubation period (24–120 h), alcohol concentration (0.25–1.25 M) and temperature (30–70 °C) on the esterification yield of isoamyl isovalerate. Extent of conversion was found to be excellent at all acid and alcohol concentrations employed in the range of 0.2–1.25 M, even at low enzyme concentration (20% w/w). The optimum conditions arrived at are as follows: 35% (w/w) enzyme concentration, 1.0 M acid concentration, 1.25 M alcohol concentration and 120 h incubation period, at 35 °C. Under these conditions, the predicted value was 680 mM ester matched very well with an experimental value of 678 mM.     

Immobilization and activity of Rhizomucor miehei lipase. Effect of the matrix properties prepared from nonionic fluorinated surfactants

We report the immobilization of Rhizomucor miehei lipase (RmL) onto mesoporous silica materials, in particular the investigations concerning the effects of the level of silica condensation and of the pore size on the enzyme activity. The efficiency of the immobilization was revealed by FTIR spectroscopy. Infrared was also used to determine the quantity of adsorbed enzyme. Immobilization efficiency increased when the RmL concentration in the buffer solution was changed from 2 to 10 mg/mL. Nevertheless, while upon enzyme immobilization the mesopore ordering was sustained for the support recovered after hydrothermal treatment at 100 °C, a structure collapse occurred for the one prepared at 80 °C. The difference in behavior is attributed to the lower hydrothermal stability of this material, which reflects the lower level of silica condensation. The enzyme-containing mesostructured silica was effectively used to catalyze the model esterification reaction of lauric acid with 1-propanol, as the immobilized lipase retained its catalytic activity. A linear relationship was observed between the reaction rate and the amount of catalyst. RmL immobilized on mesoporous materials presented a satisfactory reusability, while the remaining activity of RmL after 4 months of storage was 47% of the initial one.     

Improvement of activity and stability of Rhizomucor miehei lipase by immobilization on nanoporous aluminium oxide and potassium sulfate microcrystals and their applications in the synthesis of aroma esters

In this study, Rhizomucor miehei lipase (RML) was immobilized on the hexagonally-ordered nanoporous aluminium oxide membranes (RML-Al₂O₃-NP) by adsorption and as protein-coated microcrystals (RML-PCMCs) by simultaneously precipitating RML on micron-sized potassium sulfate crystals (K₂SO₄) in pre-chilled acetone. The hydrolytic activities of immobilized lipase preparations were investigated in terms of p-nitrophenyl palmitate hydrolysis and their esterification activities were examined for the synthesis of some aroma esters such as butyl acetate, isoamyl acetate, hexyl acetate, heptyl acetate, and geranyl acetate. The immobilization yields were 33.8 and 25.1%, respectively for RML immobilized on Al₂O₃-NP membranes and potassium sulfate crystals. The catalytic efficiency ratios of RML-Al₂O₃-NP and RML-PCMCs were 2.3- and 3.9-fold higher than that of the free lipase, respectively in terms of hydrolytic activity. The free lipase was stabilized as 4.1- and 10.5-fold, respectively at 40 and 50?°C when immobilized on Al₂O₃-NP. The corresponding stabilization factors were 4.6- and 12.8-fold higher for RML-PCMCs. RML-Al₂O₃-NP and RML-PCMCs maintained 84 and 86% of their initial hydrolytic activities, respectively after 10 reuses. Of the synthesized aroma esters, the highest yield was obtained for the geranyl acetate. After 4?h reaction time, no geraniol was detected in the preparative-scale (196?g/L) synthesis of geranyl acetate for both the immobilized lipases when the initial geraniol amount, vinyl acetate amount, RML-PCMCs amount, and reaction temperature values were 1?mmol, 3?mmol, 100?mg (or 300?mg RML-Al₂O₃-NP), and 50?°C, respectively. These results show that the immobilization of R. miehei lipase by adsorption on nanoporous aluminium oxide and as protein-coated microcrystals leads to the obtention of highly stable, catalytically more active, and reusable lipase preparations.     

Hydrolysis of chylomicron polyenoic fatty acid esters with lipoprotein lipase and hepatic lipase

The lipolysis of rat chylomicron polyenoic fatty acid esters with bovine milk lipoprotein lipase and human hepatic lipase was examined in vitro. Chylomicrons obtained after feeding fish oil or soy bean oil emulsions were used as substrates. The lipolysis was followed by gas chromatography or by using chylomicrons containing radioactive fatty acids. Lipoprotein lipase hydrolyzed eicosapentaenoic (20:5) and arachidonic acid (20:4) esters at a slower rate than the C14-C18 acid esters. More 20:5 and 20:4 thus accumulated in remaining tri- and diacylglycerols. Eicosatrienoic, docosatrienoic and docosahexanoic acids exhibited an intermediate lipolysis pattern. When added together with lipoprotein lipase, hepatic lipase increased the rate of lipolysis of 20:5 and 20:4 esters of both tri- and diacylglycerols. Addition of NaCl (final concentration 1 M) during the course of lipolysis inhibited lipoprotein lipase as well as the enhancing effect of hepatic lipase on triacylglycerol lipolysis. Hepatic lipase however, hydrolyzed diacylglycerol that had already been formed. Chylomicron 20:4 and 20:5 esters thus exhibit a relative resistance to lipoprotein lipase. It is suggested that the tri- and diacylglycerol species containing these fatty acids may accumulate at the surface of the remnant particles and act as substrate for hepatic lipase during a concerted action of this enzyme and lipoprotein lipase.     

Enzymatic synthesis of terpenyl esters by transesterification with fatty acid vinyl esters as acyl donors by Trichosporon fermentans lipase

Enzymatic synthesis of terpenyl esters by esterification or transesterification with fatty acid vinyl esters as acyl donors by celite-adsorbed lipase of Trichosporon fermentans was investigated. In direct esterification of geraniol, the lipase showed high reactivity toward fatty acids with carbon chains longer than C-8, but little reactivity toward fatty acids with shorter chains. With fatty acid vinyl esters as acyl donors, the lipase catalysed the synthesis of geranyl and citronellyl esters with carbon chains shorter than C-6 in with yields of >90% molar conversion. Time course, effects of added water, temperature and substrate concentration were studied for the synthesis of geranyl acetate. Molar conversion yield reached 97.5% after 5 h incubation at 30–40°C with the addition of 3% water. In this reaction, no inhibition by substrates such as geraniol and vinyl acetate was observed.     

Enzymatic synthesis of terpenyl esters by transesterification with fatty acid vinyl esters as acyl donors by Trichosporon fermentans lipase

Enzymatic synthesis of terpenyl esters by esterification or transesterification with fatty acid vinyl esters as acyl donors by celite-adsorbed lipase of Trichosporon fermentans was investigated. In direct esterification of geraniol, the lipase showed high reactivity toward fatty acids with carbon chains longer than C-8, but little reactivity toward fatty acids with shorter chains. With fatty acid vinyl esters as acyl donors, the lipase catalysed the synthesis of geranyl and citronellyl esters with carbon chains shorter than C-6 in with yields of >90% molar conversion. Time course, effects of added water, temperature and substrate concentration were studied for the synthesis of geranyl acetate. Molar conversion yield reached 97.5% after 5 h incubation at 30–40°C with the addition of 3% water. In this reaction, no inhibition by substrates such as geraniol and vinyl acetate was observed.     

Probing the substrate specificity for lipases. II. Kinetic and modeling studies on the molecular recognition of 2-arylpropionic esters by Candida rugosa and Rhizomucor miehei lipases

Racemic arylpropionic esters 1–3, precursors of therapeutically important non-steroidal antiinflammatory drugs, were subjected to hydrolyses in the presence of either Candida rugosa or Rhizomucor miehei crude lipases. The hydrolyses of 1 and 2 proved to be highly enantioselective, whereas 3 was not transformed at all. Both the substrate specificity and the enantioselectivity of these lipases were explained through a molecular modeling study involving docking experiments between 1–3 and the amino acids forming the enzymes active-sites, whose three-dimensional structures were obtained from X-ray crystallographic data, followed by extensive conformational analysis on their computer-generated complexes. The results of this study also account for the high enantioselective and good yielding hydrolysis of 3 (as the corresponding 2-chloroethyl ester) catalyzed by CRL pretreated with 2-propanol, recently reported in the literature, and lead to admit that such a treatment may operate very deep conformational changes on the amino acids of the enzyme active-site.     

Porcine pancreatic lipase hydrophobically adsorbed on octyl-silica: A robust biocatalyst for syntheses of xylose fatty acid esters

This work describes the immobilization of porcine pancreatic lipase (PPL), obtained from crude extract, on silica coated with octyl groups (OS) by interfacial adsorption, a simple and low-cost immobilization protocol. The biocatalyst PPL-OS was employed to the enzymatic preparation of fatty acid esters of d-xylose, a product used especially in the field of cosmetics and pharmacy, especially dermatology, improving the functionality of epidermal cells. The yields of the immobilization in terms of enzymatic activity and protein concentration (98% and 75%, respectively) suggested that PPL present in the crude extract was selectively immobilized on the octyl-silica support, which allowed the hyperactivation of the biocatalyst (recovered activity, 144%), a phenomenon that may be attributed to the interfacial activation of the enzyme on hydrophobic surfaces. The biocatalyst PPL-OS showed to be very robust in organic medium and at high temperature, which is an extremely important characteristic to produce sugar fatty acid esters from the industrial point of view. The syntheses of xylose fatty esters (oleate, caprylate and butyrate) yielded conversions around 70% after short reaction period (2?h) at 60?°C in tert-butyl alcohol. The biocatalyst, even after incubation at 60?°C for 24?h, could be reused in four esterification cycles of 2-h reaction at 60?°C, maintaining 100% of its catalytic activity.     

Improvement of the stability and selectivity of Rhizomucor miehei lipase immobilized on silica nanoparticles: Selective hydrolysis of fish oil using immobilized preparations

We report the effect of random and oriented immobilization of Rhizomucor miehei lipase (RML) on its functional properties. For this purpose, silica nanoparticles (MCM-41 and SBA-15) were prepared, characterized and functionalized by glycidyloxypropyl trimethoxysilane. Direct immobilization of RML on these supports was performed via the variety of amino acid residues on the surface of RML which promotes random immobilization. To perform oriented immobilization, partial modification of epoxy functionalized supports was carried out by introducing iminodiacetic acid groups followed by addition of Cu²⁺. In this way, immobilization is mainly directed via the most accessible histidine group, followed by intramolecular reaction of the other nucleophilic residues of the enzyme and the remaining epoxy groups on the support. The results showed higher thermal stability for immobilized derivatives compared to the soluble enzyme. Co-solvent stability of the derivatives was also studied in presence of six polar organic solvents (DMSO, THF, acetonitrile, 1-propanol, 2-propanol and dioxane). Influence of the immobilization procedure on activity and selectivity of the immobilized preparations was studied in selective hydrolysis of fish oil. All the derivatives discriminate between cis-5,8,11,14,17-eicosapentaenoic acid (EPA) and cis-4,7,10,13,16,19-docosahexaenoic acid (DHA) in favor of EPA. Remarkable improvement in selectivity was obtained using oriented immobilization of RML.     

Chemical modification studies of Rhizomucor miehei protease: evidence for the role of basic amino acids in enzyme catalysis.

The effect of chemical modification on milk clotting and proteolytic activities of aspartyl protease obtained from Rhizomucor miehei NRRL 3500 was examined in the absence and the presence of its specific inhibitor pepstatin A. The effect on the ratio of milk clotting activity (MC) to proteolytic activity (PA), an index of the quality of milk clotting proteases was also determined. Modification of the enzyme with trinitrobenzenesulfonic acid, diethylpyrocarbonate and phenylglyoxal produced an increase in the ratio of MC/PA, while modification with 2- hydroxy-5-nitrobenzyl bromide did not affect the ratio. Modification with N-acetylimidazole resulted in a marginal increase in MC/PA ratio. Protection using pepstatin A during modification with phenylglyoxal, N-acetylimidazole and 2-hydroxy-5-nitrobenzyl bromide, protected both MC and PA. In the case of modification by diethylpyrocarbonate, pepstatin A protected only MC. Pepstatin A did not protect both the activities on the modification of the enzyme by trinitrobenzene sulfonic acid. These observations indicate the presence of arginine, tyrosine and tryptophan at the catalytic site of the enzyme, for eliciting MC and PA of the enzyme. In general, modification of the positively charged residues increases the MC/PA ratio of the enzyme. In addition the modified lysine residues responsible for the inactivation of the enzyme were not involved in the active site of the enzyme. Thus the lysine residues might have a secondary role in enzyme catalysis. Further, histidine at the catalytic site was found to be exclusively involved in milk clotting activity. The enzyme with modified histidine residues were more susceptible to autocatalysis, indicating that histidine residues protect the enzyme against autolysis.     

Physical crosslinking of lipase from Rhizomucor miehei immobilized on octyl agarose via coating with ionic polymers: Avoiding enzyme release from the support

Lipase from Rhizomucor miehei (RML) was immobilized on octyl-agarose (OC) at different loadings. Using low enzyme loadings (1/7 of the maximum loading), the incubation of the enzyme with polyethylenimine (PEI) increased the resistance to enzyme desorption in the presence of Triton X-100. However, more than 10% of the enzyme activity could be released from the OC-RML-PEI. The same treatment using fully loaded biocatalyst reduced the enzyme desorption to less than 5%. Further treatment with dextran sulfate (DS) of the PEI treaded immobilized enzyme fully avoids the enzyme desorption even in presence of a Triton X-100 concentration higher than that required for the complete enzyme release from OC-RML. This treatment produced a high stabilization of OC-RML in thermal or organic solvent inactivations, reducing the enzyme release under these drastic conditions. Nevertheless, the support could be recovered by incubation under adequate conditions, and reused in several adsorption/desorption cycles. Thus, the strategy permitted to avoid enzyme desorption, very likely by physical intermolecular crosslinking improving enzyme stability, while still maintaining the reversibility of the immobilization.     

Enzymatic synthesis of unsaturated fatty acid glucoside esters for dermo-cosmetic applications.

Unsaturated fatty acid alpha-butylglucoside esters were prepared by enzymatic esterification of alpha-butylglucoside in nonaqueous media. Conditions were firstly optimized using oleic acid as acyl group. Synthesis was possible in several solvents but the presence of water co-product in the medium limited the reaction to a thermodynamic equilibrium corresponding to a maximal conversion yield of 62%. In pure molten substrates, the removal of water under reduced pressure enabled yields superior to 95% to be obtained. Product profiles depended on enzyme origin : whatever the support, immobilized lipase B from Candida antarctica proved to be far more regioselective for the primary hydroxyl group of glucose than immobilized lipase from Rhizomucor miehei. Results obtained could be easily transposed to the acylation of alpha-butylglucoside with a commercial mixture of unsaturated fatty acids containing more than 60% of linoleic acid. The biocatalyst could be recycled more than ten times without any significant activity loss.     

Origin of fatty acid synthesis: Thermodynamics and kinetics of reaction pathways

Summary The primitiveness of contemporary fatty acid biosynthesis was evaluated by using the thermodynamics and kinetics of its component reactions to estimate the extent of its dependence on powerful and selective catalysis by enzymes. Since this analysis indicated that the modern pathway is not primitive because it requires sophisticated enzymatic catalysis, we here propose an alternative pathway of primitive fatty acid synthesis that uses glycolaldehyde as a substrate. In contrast to the modern pathway, this primitive pathway is not dependent on an exogenous source of phosphoanhydride energy (ATP). Furthermore, the chemical spontaneity of its reactions suggests that it could have been readily catalyzed by the rudimentary biocatalysts available at an early stage in the origin of life.     

Red blood cell fatty acid ethyl esters: a significant component of fatty acid ethyl esters in the blood

Although alcohol abuse is known to cause an array of ethanol-induced red blood cell (RBC) abnormalities, the underlying molecular mechanisms remain poorly understood. Fatty acid ethyl esters (FAEEs) are toxic, nonoxidative ethanol metabolites that have been found in blood, plasma, and tissues. Because FAEEs have been shown to be incorporated into phospholipid bilayers, we conducted a controlled ethanol intake study to test the hypothesis that FAEEs accumulate and persist within RBCs following ethanol ingestion. We demonstrated that RBC FAEEs account for approximately 5% to 20% of total whole-blood FAEEs, and that the fatty acid composition of FAEEs in RBCs and plasma are different and vary differently over time. These data indicate that a significant percentage of FAEEs in the blood is associated with RBCs and that the metabolism of RBC FAEEs and that of plasma FAEEs (bound to albumin or lipoproteins) are largely independent.     

Immobilization of lipase from Candida cylindraceae and its use in the synthesis of menthol esters by transesterification.

Lipase (EC 3.1.1.3) from Candida cylindraceae has been immobilized by the cellulose-titanium chloride method, and on EP-400 polyethylene, with and without glutaraldehyde crosslinking, to give active preparations when assessed by their ability to catalyse the hydrolysis of tributyrin. In both cases, the use of glutaraldehyde crosslinking was shown to improve the stability of the preparations for repeated use. The lipase immobilized on EP-400 polyethylene was found to be effective in transesterification using tributyrin or triacetin as acyl donors with l-menthol as acceptor. The production of methyl butanoate and of methyl acetate using this immobilized preparation was in each case enhanced in the presence of Amberlite IR 47 Anion exchange resin (OH form).     

A monolithic lipase reactor for biodiesel production by transesterification of triacylglycerides into fatty acid methyl esters

An enzymatic reactor with lipase immobilized on a monolithic polymer support has been prepared and used to catalyze the transesterification of triacylglycerides into the fatty acid methyl esters commonly used for biodiesel. A design of experiments procedure was used to optimize the monolithic reactor with variables including control of the surface polarity of the monolith via variations in the length of the hydrocarbon chain in alkyl methacrylate monomer, time of grafting of 1-vinyl-4,4-dimethylazlactone used to activate the monolith, and time used for the immobilization of porcine lipase. Optimal conditions involved the use of a poly(stearyl methacrylate-co-ethylene dimethacrylate) monolith, grafted first with vinylazlactone, then treated with lipase for 2 h to carry out the immobilization of the enzyme. Best conditions for the transesterification of glyceryl tributyrate included a temperature of 37°C and a 10 min residence time of the substrate in the bioreactor. The reactor did not lose its activity even after pumping through it a solution of substrate equaling 1,000 reactor volumes. This enzymatic reactor was also used for the transesterification of triacylglycerides from soybean oil to fatty acid methyl esters thus demonstrating the ability of the reactor to produce biodiesel.     

Lipolysis of menhaden oil triacylglycerols and the corresponding fatty acid alkyl esters by pancreatic lipase in vitro: a reexamination

In order to distinguish between possible fatty acid differences during lumenal lipolysis and cellular absorption, we have reinvestigated the in vitro hydrolysis of menhaden oil and its alkyl esters by pancreatic lipase. For this purpose we incubated menhaden oil or its fatty acid methyl and ethyl esters with porcine pancreatic lipase in the presence of bile salts and determined the composition of the released free fatty acids, monoacylglycerols, diacylglycerols, and residual triacylglycerols, or the free fatty acids and residual alkyl esters, respectively, by thin-layer and gas-liquid chromatography. There was significant discrimination against the delta 4- to delta 7-unsaturated fatty acids of both medium and long chain lengths during the hydrolysis of menhaden oil and its fatty acid ethyl esters. In general, the ethyl esters were hydrolyzed 10-50 times more slowly than the corresponding glyceryl esters, depending on the exact ratio of the two substrate types. None of the triacylglycerols or ethyl esters, however, was completely resistant to hydrolysis resulting in an eventual cleavage of all the alkyl esters and presumably all the primary ester bonds in the triacylglycerol molecules. Since the rate of release of the least resistant fatty acid exceeded that of the most resistant acid by only a factor of 6, it is concluded that in the presence of a large excess of lipase the liberated fatty acids would approach the composition of the dietary alkyl or glyceryl esters, as observed during lumenal lipolysis (Yang, L.-Y., A. Kuksis, and J. J. Myher. 1989. Biochem. Cell Biol. 67: 192-204).