Polyhydroxyalkanoate accumulation in Burkholderia sp.: a molecular approach to elucidate the genes involved in the formation of two homopolymers consisting of short-chain-length 3-hydroxyalkanoic acids

Burkholderia sp. accumulates polyhydroxyalkanoates (PHAs) containing 3-hydroxybutyrate and 3-hydroxy-4-pentenoic acid when grown on mineral media under limited phosphate or nitrogen, and using sucrose or gluconate as a carbon and energy source. Solvent fractionation and NMR spectroscopic characterization of these polyesters revealed the simultaneous accumulation of two homopolyesters rather than a co-polyester with random sequence distribution of the monomers [Valentin HE, Berger PA, Gruys KJ, Rodrigues MFA, Steinbüchel A, Tran M, Asrar J (1999) Macromolecules 32: 7389–7395]. To understand the genetic requirements for such unusual polyester accumulation, we probed total genomic DNA from Burkholderia sp. by Southern hybridization experiments using phaC-specific probes. These experiments indicated the presence of more than one PHA synthase gene within the genome of Burkholderia sp. However, when total genomic DNA from Burkholderia sp. was used to complement a PHA-negative mutant of Ralstonia eutropha for PHA accumulation, only one PHA synthase gene was obtained resembling the R. eutropha type of PHA synthases, based on amino acid sequence similarity. In addition to the PHA synthase gene, based on high sequence homology, genes encoding a β-ketothiolase and acetoacetyl-CoA reductase were identified in a gene cluster with the PHA synthase gene. The arrangement of the three genes is quite similar to the R. eutropha poly-β-hydroxybutyrate biosynthesis operon. Received: 3 September 1999 / Received revision: 29 October 1999 / Accepted: 5 November 1999     

Formation of new polyhydroxyalkanoate containing 3-hydroxy-4-methylvalerate monomer in Burkholderia sp

Burkholderia sp. synthase has been shown to polymerize 3-hydroxybutyrate (3HB), 3-hydroxyvalerate, and 3-hydroxy-4-pentenoic acid monomers. This study was carried out to evaluate the ability of Burkholderia sp. USM (JCM 15050) and its transformant harboring the polyhydroxyalkanoate (PHA) synthase gene of Aeromonas caviae to incorporate the newly reported 3-hydroxy-4-methylvalerate (3H4MV) monomer. Various culture parameters such as concentrations of nutrient rich medium, fructose and 4-methylvaleric acid as well as harvesting time were manipulated to produce P(3HB-co-3H4MV) with different 3H4MV compositions. The structural properties of PHA containing 3H4MV monomer were investigated by using nuclear magnetic resonance and Fourier transform infrared spectroscopy (FTIR). The relative intensities of the bands at 1,183 and 1,228 cm⁻¹ in the FTIR spectra enabled the rapid detection and differentiation of P(3HB-co-3H4MV) from other types of PHA. In addition, the presence of 3H4MV units in the copolymer was found to considerably lower the melting temperature and enthalpy of fusion values compared with poly(3-hydroxybutyrate) (P(3HB)). The copolymer exhibited higher thermo-degradation temperature but similar molecular weight and polydispersity compared with P(3HB).     

Synechocystis sp. PCC6803 possesses a two-component polyhydroxyalkanoic acid synthase similar to that of anoxygenic purple sulfur bacteria

During cultivation under storage conditions with BG11 medium containing acetate as a carbon source, Synechocystis sp. PCC6803 accumulated poly(3-hydroxybutyrate) up to 10% (w/w) of the cell dry weight. Our analysis of the complete Synechocystis sp. PCC6803 genome sequence, which had recently become available, revealed that not only the open reading frame slr1830 (which was designated as phaC) but also the open reading frame slr1829, which is located colinear and upstream of phaC, most probably represent a polyhydroxyalkanoic acid (PHA) synthase gene. The open reading frame slr1829 was therefore designated as phaE. The phaE and phaC gene products exhibited striking sequence similarities to the corresponding PHA synthase subunits PhaE and PhaC of Thiocystis violacea, Chromatium vinosum, and Thiocapsa pfennigii. The Synechocystis sp. PCC6803 genes were cloned using PCR and were heterologously expressed in Escherichia coli and in Alcaligenes eutrophus. Only coexpression of phaE and phaC partially restored the ability to accumulate poly(3-hydroxybutyrate) in the PHA-negative mutant A. eutrophus PHB^–4. These results confirmed our hypothesis that coexpression of the two genes is necessary for the synthesis of a functionally active Synechocystis sp. PCC6803 PHA synthase. PHA granules were detected by electron microscopy in these cells, and the PHA-granule-associated proteins were studied. Western blot analysis of Synechocystis sp. PCC6803 crude cellular extracts and of granule-associated proteins employing antibodies raised against the PHA synthases of A. eutrophus (PhaC) and of C. vinosum (PhaE and PhaC) revealed no immunoreaction. Received: 11 March 1998 / Accepted: 2 June 1998     

Polyhydroxyalkanoate (PHA) accumulating bacteria from the gut of higher termite <Emphasis Type="Italic">Macrotermes carbonarius</Emphasis> (Blattodea: Termitidae)

The continuous quest for bacterial strains capable of accumulating polyhydroxyalkanoate (PHA) utilizing cheaper and renewable carbon source prompted us to explore newer and diverse environments like the gut of termites. Among the bacterial strains isolated from the gut of higher termite Macrotermes carbonarius, three strains were found to accumulate PHA, as observed by microscopic studies and PHA production experiments. Among them, strain MC1 with rapid growth and higher PHA accumulation was selected for further studies. API kit-50 CHB and 16S rRNA gene sequence analysis results indicated the strain to have 99% homology with Bacillus megaterium and Bacillus flexus. Bacillus sp. MC1 was able to accumulate PHA during the growth phase utilizing different carbon sources like glucose, fructose, sodium acetate, sodium valerate and 1,4-butanediol. Gas chromatography analysis of the polymer has shown it to be basically composed of poly (3-hydroxybutyrate) (PHB). Growth associated PHB biosynthesis was best in the presence of sodium acetate with 39 wt% after 16 h of cultivation. Though previous studies provided evidence confirming the presence of PHA producing bacteria in termite gut, isolation and characterization of these strains in pure culture has not been documented yet. Presence of other morphotypes in the termite gut with PHA like granular inclusions was evident from the transmission electron microscopy studies. This is a novel report and shows the feasibility of using potent strains capable of utilizing lignocellulosic degradation products as a renewable carbon source for the production of PHA in the future.     

Location of functional region at N-terminus of polyhydroxyalkanoate (PHA) synthase by N-terminal mutation and its effects on PHA synthesis

Polyhydroxyalkanoate (PHA) synthase PhaC plays a very important role in biosynthesis of microbial polyesters PHA. Compared to the extensively analyzed C-terminus of PhaC, N-terminus of PhaC was less studied. In this paper, the N-terminus of two class I PHA synthases PhaC_Re and PhaC_Ah from Ralstonia eutropha and Aeromonas hydrophila, respectively, and one class II synthase PhaC2_Ps of Pseudomonas stutzeri strain 1317, were investigated for their effect on PHA synthesis. For PhaC_Re, deletion of 2–65 amino acid residues on the N-terminus led to enhanced PHB production with high PHB molecular weight of 2.50 × 10⁶ Da. For PhaC_Ah, the deletion of the N-terminal residues resulted in increasing molecular weights and widening polydispersity accompanied by a decreased PHA production. It was found that 3-hydroxybutyrate (3HB) monomer content in copolyesters of 3-hydroxybutyrate and 3-hydroxyhexanoate (3HHx) increased when the first 2–9 and 2–13 amino acid residues in the N-terminus of PhaC2_Ps were deleted. However, deletion up to the 40th amino acid disrupted the PHA synthesis. This study confirmed that N-terminus in different types of PHA synthases showed significant roles in the PHA productivity and elongation activity. It was also indicated that N-terminal mutation was very effective for the location of functional regions at N-terminus.     

Chemo-enzymatic synthesis of polyhydroxyalkanoate (PHA) incorporating 2-hydroxybutyrate by wild-type class I PHA synthase from <Emphasis Type="Italic">Ralstonia eutropha</Emphasis>

A previously established improved two-phase reaction system has been applied to analyze the substrate specificities and polymerization activities of polyhydroxyalkanoate (PHA) synthases. We first analyzed the substrate specificity of propionate coenzyme A (CoA) transferase and found that 2-hydroxybutyrate (2HB) was converted into its CoA derivative. Then, the synthesis of PHA incorporating 2HB was achieved by a wild-type class I PHA synthase from Ralstonia eutropha. The PHA synthase stereoselectively polymerized (R)-2HB, and the maximal molar ratio of 2HB in the polymer was 9 mol%. The yields and the molecular weights of the products were decreased with the increase of the (R)-2HB concentration in the reaction mixture. The weight-average molecular weight of the polymer incorporating 9 mol% 2HB was 1.00 × 10⁵, and a unimodal peak with polydispersity of 3.1 was observed in the GPC chart. Thermal properties of the polymer incorporating 9 mol% 2HB were analyzed by DSC and TG-DTA. T _g, T _m, and T _d (10%) were observed at −1.1°C, 158.8°C, and 252.7°C, respectively. In general, major components of PHAs are 3-hydroxyalkanoates, and only engineered class II PHA synthases have been reported as enzymes having the ability to polymerize HA with the hydroxyl group at C2 position. Thus, this is the first report to demonstrate that wild-type class I PHA synthase was able to polymerize 2HB.     

Production of copolymer poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-4-hydroxybutyrate) through a one-step cultivation process

A one-step cultivation process for the production of biodegradable polymer poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] by Cupriavidus sp. USMAA2-4 was carried out using various carbon sources. It was found that Cupriavidus sp. USMAA2-4 could produce approximately 44 wt.% copolymer of P(3HB-co-4HB) with 27 mol% 4HB composition when the combination of oleic acid and 1,4-butanediol are used as carbon sources in 60 h cultivation. The manipulation of carbon-to-nitrogen ratio (C/N) resulted in the increase of dry cell weight, PHA content as well as 4HB composition. A new strategy of introducing oleic acid and 1,4-butanediol together and separately at different concentration demonstrated different yield in PHA content ranging from 47 to 58 wt.%. The molecular weight obtained was 234 kDa (by adding 1,4-butanediol and oleic acid together) and 212 kDa (by adding 1,4-butanediol separately). The copolymer of P(3HB-co-4HB) produced by Cupriavidus sp. USMAA2-4 was detected statistically as a random copolymer when analysed by nuclear magnetic resonance (NMR) spectroscopy.     

Regulating the molar fraction of 4-hydroxybutyrate in Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) by biological fermentation and enzymatic degradation

The regulation of 4-hydroxybutyrate (4HB) molar fraction in the poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] of a local isolate Cupriavidus sp. USMAA1020 was attempted by employing a feeding strategy through fed-batch fermentation in 100-L fermenter. The growth of Cupriavidus sp. USMAA1020 was enhanced by frequently feeding carbon and nitrogen at a ratio of 5 (C/N 5) using a DO-stat with cascade mode at 20% (v/v) dissolved oxygen (DO). The feeding of C/N 5 and the use of the DO-stat mode were able to regulate the 4HB composition from 0–67 mol% by sequential feeding of γ-butyrolactone and supplementing oleic acid. A high 4HB molar fraction of 67 mol% with a PHA concentration of 5.2 g/L was successfully obtained by employing this feeding strategy. Notably, enzymatic degradation carried out enhanced the 4HB composition of the copolymer synthesized. PHB depolymerase enzyme from Acidovorax sp. was used to degrade this P(3HB-co-70-mol%4HB) copolymer and the 4HB composition could be increased up to 83 mol%. The degradation process was observed by monitoring the time-dependent change in the weight loss of copolymer films. The percentage of weight loss of solvent-cast film increased proportionally up to 19% within 3 h, whereas salt-leached films showed 90% of weight loss within 3 h of incubation and were completely degraded by 4 h. The molecular weight (M _n ) of the films treated with enzyme demonstrated a slight decrease. SEM observation exhibited a rough surface morphology of the copolymer degraded with depolymerase enzyme.     

Scanning electron microscopy of polyhydroxyalkanoate degradation by bacteria

Bacterial degradation of sheets of selected polyhydroxyalkanoates by Comamonas sp., Pseudomonas lemoignei and Pseudomonas fluorescens GK13 is reported. Five natural polyhydroxyalkanoates were used, namely poly(3-hydroxybutyrate), poly(3-hydroxyvalerate), a copolymer of 3-hydroxybutyrate and 3-hydroxyvalerate, a copolymer of mainly 3-hydroxyoctanoate and minor amounts of 3-hydroxyhexanoate, and two rubber-like copolymers of saturated and unsaturated hydroxyalkanoic acids that had been modified by electron-beam-induced cross-linking. Each of these polymers was degraded by at least one bacterial strain, the rate of hydrolysis being dependent on the surface area of the polymer exposed to attack. Scanning electron microscopy of partially degraded samples showed that hydrolysis started at the surface and at physical lesions in the polymer and proceeded to the inner part of the material. No evidence for areas of non-degradable polymer was found for any of the polymers analysed, even if the polymer contained chemical cross-links. Received: 24 July 1996 / Accepted: 29 August 1996     

Degradation of poly (3-hydroxybutyrate) and its copolymer poly (3-hydroxybutyrate-co-3-hydroxyvalerate) by a marine Streptomyces sp. SNG9

A marine Streptomyces sp. SNG9 was characterized by its ability to utilize poly(3-hydroxybutyrate) (PHB) and its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate P (3HB-co-HV). The bacterium grew efficiently in a simple mineral liquid medium enriched with 0.1% poly(3-hydroxybutyrate) powder as the sole carbon source. Cells excreted PHB depolymerase and degraded the polymer particles to complete clarity in 4 days. The degradation activity was detectable by the formation of a clear zone around the colony (petri plates) or a clear depth under the colony (test tubes). The expression of PHB depolymerase was repressed by the presence of simple soluble carbon sources. Bacterial degradation of the naturally occurring sheets of poly(3-hydroxybutyrate) and its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) was observed by scanning electron microscopy (SEM). Morphological alterations of the polymers sheets were evidence for bacterial hydrolysis.     

Molecular characterization of Pseudomonas sp. LDC-5 involved in accumulation of poly 3-hydroxybutyrate and medium-chain-length poly 3-hydroxyalkanoates

Polyhydroxyalkanoates (PHAs) are biological polyesters, of which, Short-Chain-Length-Medium-Chain-Length (SCL-MCL) PHA copolymers are important because of their wide range of applications. The present study focused on molecular characterization of Pseudomonas sp. LDC-5 that is identified as SCL-MCL producer. Phase contrast, fluorescent and electron microscopic observation confirmed the presence of PHA granules in Pseudomonas sp. LDC-5. PCR analysis indicated the presence of expected amplicon for SCL phaC gene (∼500 bp), MCL phaC1 with phaZ (∼1.3), and phaC2 with phaZ (∼1.5 kb). Sequence analysis of the PHA synthase gene of Pseudomonas sp. LDC-5 revealed significant differences in phaC1 and phaC2 which were further confirmed by recombinant studies. Recombinant Escherichia coli harboring the partial phaC1 gene was able to accumulate PHA, whereas E. coli with phaC2 did not accumulate PHA as verified by fold analysis, immunoblotting, Gas Chromatography (GC), Differential scanning calorimetry (DSC), and FTIR studies. The predicted theoretical three-dimensional structure revealed that PhaC1 is consistent with α/β hydrolase fold. Monomer composition showed the presence of monomer ranging from C4 to C12: 1 when glucose and sodium octanoate fed as the carbon source. DSC revealed melting temperature peak at 153.12°C and glass transition (T_g) peaks at −0.37°C. Thermogravimetric analysis revealed that the polymer was stable up to 276°C. Fourier Transform Infrared Spectroscopy (FT-IR) spectral analysis showed the PHA specific wave number at 1,739.67 and 1,161.07 cm⁻¹. The potential of Pseudomonas sp. LDC-5 and its properties are discussed.     

DEGRADATION OF THE CELL-WALL POLYSACCHARIDE OF PORPHYRIDIUM SP. (RHODOPHYTA) BY MEANS OF ENZYMATIC ACTIVITY OF ITS PREDATOR,GYMNODINIUM SP. (PYRROPHYTA)1

The dinoflagellate Gymnodinium sp., which preys specifically on cells of the red microalga Porphyridium sp., possesses enzymes that degrade exocellular polysaccharides of the Porphyridium sp. A crude extract of Gymnodinium sp. was applied to this polysaccharide, and the degradation products were characterized by charge and size separations. Charge separation revealed the presence of a fraction that was not found in the native polysaccharide. This fraction, which was eluted from an anion-exchange resin with water alone, was composed mostly of glucose and xylose (in a 1:1 weight ratio). Size separation of the degradation products revealed three fractions; the molecular weight of the main one was 5 × 10⁶ daltons, whereas that of the native polysaccharide was 7 × 10⁶ daltons. The carbohydrate composition of these fractions was determined. Although the main product of degradation had a relatively high molecular weight, its viscosity was significantly reduced relative to the native polysaccharide. Additional enzymatic degradation is required for further exploration of the structure of the exocellular polymer of Porphyridium sp.     

The accumulation of poly(3-hydroxyalkanoates) in Rhodobacter sphaeroides

In recent years industrial interest has been focussed on the evaluation of poly(3-hydroxyalkanoates) (PHA) as potentially biodegradable plastics for a wide range of technical applications. Studies have been carried out in order to optimize growth and culture conditions for the intracellular formation of PHA in the phototrophic, purple, non-sulfur bacterium Rhodobacter sphaeroides. Its potential to produce polyesters other than poly(3-hydroxybutyrate) (PHB) was investigated. On an industrial scale, the use of photosynthetic bacteria could harness sunlight as an energy source for the production of these materials. R. sphaeroides was grown anaerobically in the light on different carbon sources. Under nitrogenlimiting conditions a PHA content of up to 60 to 70% of the cellular dry weight was detected. In all of the cases studied, the storage polymer contained approximately 98 mol% of 3-hydroxybutyrate (HB) and 2 mol% 3-hydroxyvalerate (HV) monomer units. Decreasing light intensities did not stimulate PHA formation. Compared to Rhodospirillum rubrum (another member of the family of Rhodospirillaceae), R. sphaeroides showed a limited flexibility in its ability to form PHA with varying monomer unit compositions.     

3-Hydroxybutyrate Oligomer Hydrolase and 3-Hydroxybutyrate Dehydrogenase Participate in Intracellular Polyhydroxybutyrate and Polyhydroxyvalerate Degradation in Paracoccus denitrificans

Genes encoding 3-hydroxybutyrate oligomer hydrolase (PhaZc) and 3-hydroxybutyrate dehydrogenase (Hbd) were isolated from Paracoccus denitrificans. PhaZc and Hbd were overproduced as His-tagged proteins in Escherichia coli and purified by affinity and gel filtration chromatography. Purified His-tagged proteins had molecular masses of 31 kDa and 120 kDa (a tetramer of 29-kDa subunits). The His-tagged PhaZc hydrolyzed not only 3-hydroxybutyrate oligomers but also 3-hydroxyvalerate oligomers. The His-tagged Hbd catalyzed the dehydrogenation of 3-hydroxyvalerate as well as 3-hydroxybutyrate. When both enzymes were included in the same enzymatic reaction system with 3-hydroxyvalerate dimer, sequential reactions occurred, suggesting that PhaZc and Hbd play an important role in the intracellular degradation of poly(3-hydroxyvalerate). When the phaZc gene was disrupted in P. denitrificans by insertional inactivation, the mutant strain lost PhaZc activity. When the phaZc-disrupted P. denitrificans was complemented with phaZc, PhaZc activity was restored. These results suggest that P. denitrificans carries a single phaZc gene. Disruption of the phaZc gene in P. denitrificans affected the degradation rate of PHA.     

Chain transfer reaction catalyzed by various polyhydroxyalkanoate synthases with poly(ethylene glycol) as an exogenous chain transfer agent

Polyhydroxyalkanoate (PHA) synthases catalyze chain transfer (CT) reaction after polymerization reaction of PHA by transferring PHA chain from PHA synthase to a CT agent, resulting in covalent bonding of CT agent to PHA chain at the carboxyl end. Previous studies have shown that poly(ethylene glycol) (PEG) is an effective exogenous CT agent. This study aimed to compare the effects of PEG on CT reaction during poly[(R)-3-hydroxybutyrate] [P(3HB)] synthesis by using six PHA synthases in Escherichia coli JM109. The synthesized P(3HB) polymers were characterized in terms of molecular weight and end-group structure. Supplementation of PEG to the culture medium reduced P(3HB) molecular weights by up to 96% due to PEG-induced CT reaction. The P(3HB) polymers were subjected to ¹H NMR analysis to confirm the formation of a covalent bond between PEG and P(3HB) chain at the carboxyl end. This study revealed the reactivity of PHA synthases to PEG with respect to CT reaction in E. coli.     

Microbial production of polyhydroxyalkanoate block copolymer by recombinant Pseudomonas putida

Polyhydroxyalkanoate (PHA) synthesis genes phaPCJ _Ac cloned from Aeromonas caviae were transformed into Pseudomonas putida KTOY06ΔC, a mutant of P. putida KT2442, resulting in the ability of the recombinant P. putida KTOY06ΔC (phaPCJ _A.c ) to produce a short-chain-length and medium-chain-length PHA block copolymer consisting of poly-3-hydroxybutyrate (PHB) as one block and random copolymer of 3-hydroxyvalerate (3HV) and 3-hydroxyheptanoate (3HHp) as another block. The novel block polymer was studied by differential scanning calorimetry (DSC), nuclear magnetic resonance, and rheology measurements. DSC studies showed the polymer to possess two glass transition temperatures (T _g), one melting temperature (T _m) and one cool crystallization temperature (T _c). Rheology studies clearly indicated a polymer chain re-arrangement in the copolymer; these studies confirmed the polymer to be a block copolymer, with over 70 mol% homopolymer (PHB) of 3-hydroxybutyrate (3HB) as one block and around 30 mol% random copolymers of 3HV and 3HHp as the second block. The block copolymer was shown to have the highest tensile strength and Young’s modulus compared with a random copolymer with similar ratio and a blend of homopolymers PHB and PHVHHp with similar ratio. Compared with other commercially available PHA including PHB, PHBV, PHBHHx, and P3HB4HB, the short-chain- and medium-chain-length block copolymer PHB-b-PHVHHp showed differences in terms of mechanical properties and should draw more attentions from the PHA research community.     

Efficient production of polyhydroxyalkanoates from plant oils by Alcaligenes eutrophus and its recombinant strain

The ability of Alcaligenes eutrophus to grow and produce polyhydroxyalkanoates (PHA) on plant oils was evaluated. When olive oil, corn oil, or palm oil was fed as a sole carbon source, the wild-type strain of A. eutrophus grew well and accumulated poly(3-hydroxybutyrate) homopolymer up to approximately 80% (w/w) of the cell dry weight during its stationary growth phase. In addition, a recombinant strain of A. eutrophus PHB⁻4 (a PHA-negative mutant), harboring a PHA synthase gene from Aeromonas caviae, was revealed to produce a random copolyester of 3-hydroxybutyrate and 3-hydroxyhexanoate from these plant oils with a high cellular content (approximately 80% w/w). The mole fraction of 3-hydroxyhexanoate units was 4–5 mol% whatever the structure of the triglycerides fed. The polyesters produced by the A. eutrophus strains from olive oil were 200–400 kDa (the number-average molecular mass). The results demonstrate that renewable and inexpensive plant oils are excellent carbon sources for efficient production of PHA using A. eutrophus strains. Received: 3 September 1997 / Received revision: 10 November 1997 / Accepted: 16 November 1997     

Construction of a Streptomyces sp.–Escherichia coli conjugative shuttle vector and its application for recombinant biosynthesis of poly(3-hydroxyalkanoic acid)

pGTR760 and pGTR761, two new shuttle vectors, withmultiple cloning sites and capable of conjugal transfer from E. coli to Streptomyces sp. were constructed. The poly-3-hydroxybutyrate (PHB) biosynthetic polycistron from Ralstonia eutropha was cloned into the pGTR760 vector to derive the pCAB_Re plasmid. The pCAB_Re plasmid was conjugally transferred from E. coli S17-1 to Streptomyces lividans TK64. Fluorescence microscopy of the recombinant and the untransformed S. lividans TK64 revealed presence of polyhydroxyalkanoates (PHAs) in both cell types. GC/GC-MS analysis revealed the accumulated polymer to be polyhydroxyoctanoate (PHO). While the untransformed S. lividans cells accumulate 3.5% PHO of cell dry wt, the recombinant cells accumulate 8% PHO of the cell dry wt. The transformation of S. lividans, however, resulted in slower growth rate, delayed sporulation and impaired pigment formation. Scanning electron microscope analysis revealed broken mycelia probably due to release of accumulated PHO granules from the cells.     

Non-conventional yeasts as producers of polyhydroxyalkanoates—genetic engineering of<Emphasis Type="Italic"> Arxula adeninivorans</Emphasis>

The non-conventional yeast Arxula adeninivorans was equipped with the genes phbA, phbB and phbC of the polyhydroxyalkanoate (PHA) biosynthetic pathway of Ralstonia eutropha, which encode -ketothiolase, NADPH-linked acetoacetyl-CoA reductase and PHA synthase, respectively. Arxula strains transformed solely with the PHA synthase gene (phbC) were able to produce PHA. However, the maximum content of the polymer detected in these strains was just 0.003% poly-3-hydroxybutyrate (PHB) and 0.112% poly-3-hydroxyvalerate (PHV). The expression of all three genes (phbA, phbB, phbC) resulted in small increases in the PHA content of the transgenic Arxula cells. However, under controlled cultivation conditions with minimal medium and ethanol as the carbon source, the recombinant yeast was able to accumulate up to 2.2% PHV and 0.019% PHB. Possible reasons for these differences are discussed.     

Biosynthesis of novel polyhydroxyalkanoate containing 3-hydroxy-4-methylvalerate by Chromobacterium sp. USM2

Aims: Polyhydroxyalkanoate (PHA) with enhanced physicochemical properties will be ideal for a wide range of practical applications. The incorporation of 3‐hydroxy‐4‐methylvalerate (3H4MV) into the polymer backbone is known to improve the overall properties of the resulting polymer. However, the most suitable micro‐organism and PHA synthase that can synthesize this monomer efficiently still remain unknown at present. Therefore, we evaluated the abilities of a locally isolated Chromobacterium sp. USM2 to produce PHA containing 3H4MV. Methods and Results: The ability of Chromobacterium sp. USM2 to synthesize poly(3‐hydroxybutyrate‐co‐3‐hydroxy‐4‐methylvalerate) [P(3HB‐co‐3H4MV)] was evaluated under different culture conditions. It was found that Chromobacterium sp. USM2 can synthesize P(3HB‐co‐3H4MV) when glucose and isocaproic acid were fed as carbon source. However, the highest molar fraction of 3H4MV, 22 mol% was detected in Chromobacterium sp. USM2 when isocaproic acid was provided as the sole carbon source. In addition, aeration was identified as a crucial factor in initiating the accumulation of high 3H4MV molar fractions. Conclusions: Chromobacterium sp. USM2 was able to synthesize broad comonomer compositional distribution of P(3HB‐co‐3H4MV). Significance and Impact of the Study: Compared with Cupriavidus necator and Burkholderia sp., Chromobacterium sp. USM2 was found to have better ability to bioconvert isocaproic acid to form 3H4MV unit.