QTL analysis of flowering time and ripening traits suggests an impact of a genomic region on linkage group 1 in Vitis

In the recent past, genetic analyses of grapevine focused mainly on the identification of resistance loci for major diseases such as powdery and downy mildew. Currently, breeding programs make intensive use of these results by applying molecular markers linked to the resistance traits. However, modern genetics also allows to address additional agronomic traits that have considerable impact on the selection of grapevine cultivars. In this study, we have used linkage mapping for the identification and characterization of flowering time and ripening traits in a mapping population from a cross of V3125 (‘Schiava Grossa’ × ‘Riesling’) and the interspecific rootstock cultivar ‘Börner’ (Vitis riparia × Vitis cinerea). Comparison of the flowering time QTL mapping with data derived from a second independent segregating population identified several common QTLs. Especially a large region on linkage group 1 proved to be of special interest given the genetic divergence of the parents of the two populations. The proximity of the QTL region contains two CONSTANS-like genes. In accordance with data from other plants such as Arabidopsis thaliana and Oryza sativa, we hypothesize that these genes are major contributors to control the time of flowering in Vitis.     

Identification of QTLs conferring resistance to downy mildews of maize in Asia

Downy mildew is one of the most destructive diseases of maize in subtropical and tropical regions in Asia. As a prerequisite for improving downy mildew resistance in maize, we analyzed quantitative trait loci (QTLs) involved in resistance to the important downy mildew pathogens--Peronosclerospora sorghi (sorghum downy mildew) and P. heteropogoni (Rajasthan downy mildew) in India, P. maydis (Java downy mildew) in Indonesia, P. zeae in Thailand and P. philippinensis in the Philippines--using a recombinant inbred line population derived from a cross between Ki3 (downy mildew resistant) and CML139 (susceptible). Resistance was evaluated as percentage disease incidence in replicated field trials at five downy mildew 'hotspots' in the four countries. Heritability estimates of individual environments ranged from 0.58 to 0.75 with an across environment heritability of 0.50. Composite interval mapping was applied for QTL detection using a previously constructed restriction fragment length polymorphism linkage map. The investigation resulted in the identification of six genomic regions on chromosomes 1, 2, 6, 7 and 10 involved in the resistance to the downy mildews under study, explaining, in total, 26-57% of the phenotypic variance for disease response. Most QTL alleles conferring resistance to the downy mildews were from Ki3. All QTLs showed significant QTL x environment interactions, suggesting that the expression of the QTL may be environment-dependent. A strong QTL on chromosome 6 was stable across environments, significantly affecting disease resistance at the five locations in four Asian countries. Simple-sequence repeat markers tightly linked to this QTL were identified for potential use in marker-assisted selection.     

Characterisation of powdery mildew resistance in a segregating diploid rose population

Powdery mildew (Podosphaera pannoso) is one of the most serious fungal diseases on both greenhouse and field grown roses. Improvement of disease resistance is a major selection aim for garden rose breeders. For rose cultivars, being mostly tetraptoid, it is complicated to develop molecular markers for resistance. Hence, a segregating diploid population was established from a cross between 'Yesterday', a commercial available rose variety susceptible to powdery mildew, and R. wichurana, a rose species with resistance to certain isolates of powdery mildew. A progeny of 94 seedlings was planted in the field. The segregation of powdery mildew resistance was studied in this population by means of a bioassay with two different monoconidial isolates of powdery mildew. Based on the response to these inoculations different groups were selected: a first group of genotypes was susceptible to both isolates, other groups were susceptible to one of both isolates and a last group was resistant to both tested isolates. The disease resistance inherits for both isolates in a quantitative way. A genetic map based on AFLP and SSR markers was established and will be used for QTL analysis of powdery mildew resistance.     

An Association Between High Peroxidase Activity in Lettuce (Lactuca sativa) and Field Resistance to Downy Mildew (Bremia lactucae)

The association between variation for pre-infection peroxidase activity and levels of field resistance-susceptibility to downy mildew (Bremia lactucae) was investigated in lettuce (Lactuca sativa) cultivars, accessions of L. serriola (prickly lettuce), segregating F₂ populations and selected F₃ families from a cross between field resistant and susceptible lettuce cultivars. A trend was apparent in this series of experiments indicating that one component of field resistance could be related to a high level of peroxidase activity prior to infection. The data suggest that in breeding programmes there could be merit in imposing primary selection for high peroxidase activity prior to field selection for resistance.     

Genetic dissection of sex determinism, inflorescence morphology and downy mildew resistance in grapevine

A genetic linkage map of grapevine was constructed using a pseudo-testcross strategy based upon 138 individuals derived from a cross of Vitis vinifera Cabernet Sauvignon × Vitis riparia Gloire de Montpellier. A total of 212 DNA markers including 199 single sequence repeats (SSRs), 11 single strand conformation polymorphisms (SSCPs) and two morphological markers were mapped onto 19 linkage groups (LG) which covered 1,249 cM with an average of 6.7 cM between markers. The position of SSR loci in the maps presented here is consistent with the genome sequence. Quantitative traits loci (QTLs) for several traits of inflorescence and flower morphology, and downy mildew resistance were investigated. Two novel QTLs for downy mildew resistance were mapped on linkage groups 9 and 12, they explain 26.0–34.4 and 28.9–31.5% of total variance, respectively. QTLs for inflorescence morphology with a large effect (14–70% of total variance explained) were detected close to the Sex locus on LG 2. The gene of the enzyme 1-aminocyclopropane-1-carboxylic acid synthase, involved in melon male organ development and located in the confidence interval of all QTLs detected on the LG 2, could be considered as a putative candidate gene for the control of sexual traits in grapevine. Co-localisations were found between four QTLs, detected on linkage groups 1, 14, 17 and 18, and the position of the floral organ development genes GIBBERELLIN INSENSITIVE1, FRUITFULL, LEAFY and AGAMOUS. Our results demonstrate that the sex determinism locus also determines both flower and inflorescence morphological traits.     

A Genetic Map of Lettuce (Lactuca sativa L.) with Restriction Fragment Length Polymorphism, Isozyme, Disease Resistance and Morphological Markers

A detailed linkage map of lettuce was constructed using 53 genetic markers including 41 restriction fragment length polymorphism (RFLP) loci, five downy mildew resistance genes, four isozyme loci and three morphological markers. The genetic markers were distributed into nine linkage groups and cover 404 cM which may be 25-30% of the lettuce genome. The majority (31 of 34) of the RFLP probes detected single segregating loci, although seven of these may have been homologous to further monomorphic loci. When several loci were detected by a single probe, the loci were generally linked, suggesting tandem duplications. One probe, however, detected loci in three linkage groups suggesting translocations. The five downy mildew resistance genes (Dm1, Dm3, Dm4, Dm5/8 and Dm13), segregating in the Calmar x Kordaat cross, represented each of the four resistance gene linkage groups. Dm5/8 is flanked by two cDNA loci, each located 10 cM away. These flanking markers will be used to study the source of variation in downy mildew genes and are also part our strategy to clone resistance genes.     

Cryptic diversity of <Emphasis Type="Italic">Plasmopara viticola</Emphasis> (Oomycota,Peronosporaceae) in North America

Plasmopara viticola is the causal agent of grapevine downy mildew and is among the most important diseases in viticulture. It originates from North America, where it coevolved with wild Vitis species. Beginning in the 1870s it turned into a global epidemic that has been causing severe yield losses. It is generally believed that a single species is causing downy mildew on a large variety of economically important cultivars. Here we report, based on one nuclear and two mitochondrial markers, that isolates from vineyards in the United States fall into three highly distinct phylogenetic lineages. One of these contains European strains and affects Vitis vinifera cultivars, while the other two lineages affect also other species of Vitis. The divergence between these lineages is high, and, judging from the genetic variation in other Plasmopara lineages, might reflect distinct species. Due to the potentially significant implications for quarantine regulations and resistance breeding, detailed studies will be necessary to clarify whether these genetically distinct lineages occur outside of North America or are still confined there.     

Linkage maps of grapevine displaying the chromosomal locations of 420 microsatellite markers and 82 markers for <Emphasis Type="Italic">R</Emphasis>-gene candidates

Genetic maps functionally oriented towards disease resistance have been constructed in grapevine by analysing with a simultaneous maximum-likelihood estimation of linkage 502 markers including microsatellites and resistance gene analogs (RGAs). Mapping material consisted of two pseudo-testcrosses, ‘Chardonnay’ × ‘Bianca’ and ‘Cabernet Sauvignon’ × ‘20/3’ where the seed parents were Vitis vinifera genotypes and the male parents were Vitis hybrids carrying resistance to mildew diseases. Individual maps included 320–364 markers each. The simultaneous use of two mapping crosses made with two pairs of distantly related parents allowed mapping as much as 91% of the markers tested. The integrated map included 420 Simple Sequence Repeat (SSR) markers that identified 536 SSR loci and 82 RGA markers that identified 173 RGA loci. This map consisted of 19 linkage groups (LGs) corresponding to the grape haploid chromosome number, had a total length of 1,676 cM and a mean distance between adjacent loci of 3.6 cM. Single-locus SSR markers were randomly distributed over the map (CD = 1.12). RGA markers were found in 18 of the 19 LGs but most of them (83%) were clustered on seven LGs, namely groups 3, 7, 9, 12, 13, 18 and 19. Several RGA clusters mapped to chromosomal regions where phenotypic traits of resistance to fungal diseases such as downy mildew and powdery mildew, bacterial diseases such as Pierce’s disease, and pests such as dagger and root-knot nematode, were previously mapped in different segregating populations. The high number of RGA markers integrated into this new map will help find markers linked to genetic determinants of different pest and disease resistances in grape. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Genetic dissection of a TIR‐NB‐LRR locus from the wild North American grapevine species Muscadinia rotundifolia identifies paralogous genes conferring resistance to major fungal and oomycete pathogens in cultivated grapevine

The most economically important diseases of grapevine cultivation worldwide are caused by the fungal pathogen powdery mildew (Erysiphe necator syn. Uncinula necator) and the oomycete pathogen downy mildew (Plasmopara viticola). Currently, grapegrowers rely heavily on the use of agrochemicals to minimize the potentially devastating impact of these pathogens on grape yield and quality. The wild North American grapevine species Muscadinia rotundifolia was recognized as early as 1889 to be resistant to both powdery and downy mildew. We have now mapped resistance to these two mildew pathogens in M. rotundifolia to a single locus on chromosome 12 that contains a family of seven TIR‐NB‐LRR genes. We further demonstrate that two highly homologous (86% amino acid identity) members of this gene family confer strong resistance to these unrelated pathogens following genetic transformation into susceptible Vitis vinifera winegrape cultivars. These two genes, designated r esistance to P lasmopara v iticola (MrRPV1) are the first resistance genes to be cloned from a grapevine species. Both MrRUN1 and MrRPV1 were found to confer resistance to multiple powdery and downy mildew isolates from France, North America and Australia; however, a single powdery mildew isolate collected from the south‐eastern region of North America, to which M. rotundifolia is native, was capable of breaking MrRUN1‐mediated resistance. Comparisons of gene organization and coding sequences between M. rotundifolia and the cultivated grapevine V. vinifera at the MrRUN1/MrRPV1 locus revealed a high level of synteny, suggesting that the TIR‐NB‐LRR genes at this locus share a common ancestor.     

Single and multiple phenotype QTL analyses of downy mildew resistance in interspecific grapevines

Key message

Downy mildew resistance across days post-inoculation, experiments, and years in two interspecific grapevine F₁ families was investigated using linear mixed models and Bayesian networks, and five new QTL were identified.

Abstract

Breeding grapevines for downy mildew disease resistance has traditionally relied on qualitative gene resistance, which can be overcome by pathogen evolution. Analyzing two interspecific F₁ families, both having ancestry derived from Vitis vinifera and wild North American Vitis species, across 2 years and multiple experiments, we found multiple loci associated with downy mildew sporulation and hypersensitive response in both families using a single phenotype model. The loci explained between 7 and 17% of the variance for either phenotype, suggesting a complex genetic architecture for these traits in the two families studied. For two loci, we used RNA-Seq to detect differentially transcribed genes and found that the candidate genes at these loci were likely not NBS-LRR genes. Additionally, using a multiple phenotype Bayesian network analysis, we found effects between the leaf trichome density, hypersensitive response, and sporulation phenotypes. Moderate–high heritabilities were found for all three phenotypes, suggesting that selection for downy mildew resistance is an achievable goal by breeding for either physical- or non-physical-based resistance mechanisms, with the combination of the two possibly providing durable resistance.

     

Genetic linkage maps of two interspecific grape crosses (Vitis spp.) used to localize quantitative trait loci for downy mildew resistance

Two populations (Pop) segregating quantitatively for resistance to downy mildew (DM), caused by Plasmopara viticola, were used to construct genetic maps and to carry out quantitative trait locus (QTL) analysis. Pop1 comprised of 174 F₁ individuals from a cross of ‘Moscato Bianco’, a susceptible Vitis vinifera cultivar, and a resistant individual of Vitis riparia. Pop2 consisted of 94 progeny from a cross of two interspecific hybrids, ‘VRH3082 1-42’ and ‘SK77 5/3’, with resistance traits inherited from Vitis rotundifolia and Vitis amurensis, respectively. Resistance of progeny was measured in field and greenhouse conditions by visual evaluation of disease symptoms on leaves. Linkage maps of 1037.2 and 651 cM were built essentially with simple sequence repeat markers and were enriched with gene-derived single-strand conformational polymorphism and single-nucleotide polymorphism markers. Simple interval mapping and Kruskall–Wallis analysis detected a stable QTL involved in field resistance to DM on linkage group (LG) 7 of the Pop1 integrated map co-localized with a putative Caffeoyl-CoA O-methyltransferase-derived marker. Additional QTLs were detected on LGs 8, 12 and 17. We were able to identify genetic factors correlated with resistance to P. viticola with lower statistical significance on LGs 1, 6 and 7 of the Pop2 map. Finally, no common QTLs were found between the two crosses analyzed. A search of the grapevine genome sequence revealed either homologues to non-host-, host- or defense-signalling genes within the QTL intervals. These positional candidate genes may provide new information about chromosomal regions hosting phenotypic loci.     

Identification of the BrRHP1 locus that confers resistance to downy mildew in Chinese cabbage (Brassica rapa ssp. pekinensis) and development of linked molecular markers

Inheritance of resistance to downy mildew (Hyaloperonospora parasitica) in Chinese cabbage (Brassica rapa ssp. pekinensis) was studied using inbred parental lines RS1 and SS1 that display strong resistance and severe susceptibility, respectively. F(1), F(2), and BC(1)F(1) populations were evaluated for their responses to downy mildew infection. Resistance to downy mildew was conditioned by a single dominant locus designated BrRHP1. A random amplified polymorphic DNA (RAPD) marker linked to BrRHP1 was identified using bulked segregant analysis and two molecular markers designated BrPERK15A and BrPERK15B were developed. BrPERK15B was polymorphic between the parental lines used to construct the reference linkage map of B. rapa, allowing the mapping of the BrRHP1 locus to the A1 linkage group. Using bacterial artificial chromosome clone sequences anchored to the A1 linkage group, six simple polymerase chain reaction (PCR) markers were developed for use in marker-assisted breeding of downy mildew resistance in Chinese cabbage. Four simple PCR markers flanking the BrRHP1 locus were shown to be collinear with the long-arm region of Arabidopsis chromosome 3. The two closely linked flanking markers delimit the BrRHP1 locus within a 2.2-Mb interval of this Arabidopsis syntenic region.     

Development of SCAR markers linked to powdery mildew (<Emphasis Type="Italic">Uncinula necator</Emphasis>) resistance in grapevine (<Emphasis Type="Italic">Vitis vinifera</Emphasis> L. and <Emphasis Type="Italic">Vitis</Emphasis> sp.)

Sequence-characterized amplified regions markers (SCARs) were developed from six randomly amplified polymorphic DNA (RAPD) markers linked to the major QTL region for powdery mildew (Uncinula necator) resistance in a test population derived from the cross of grapevine cultivars “Regent” (resistant) × “Lemberger”(susceptible). RAPD products were cloned and sequenced. Primer pairs with at least 21 nucleotides primer length were designed. All pairs were tested in the F1 progeny of “Regent” × “Lemberger”. The SCAR primers resulted in the amplification of specific bands of expected sizes and were tested in additional genetic resources of resistant and susceptible germplasm. All SCAR primer pairs resulted in the amplification of specific fragments. Two of the SCAR markers named ScORA7-760 and ScORN3-R produced amplification products predominantly in resistant individuals and were found to correlate to disease resistance. ScORA7-760, in particular, is suitable for marker-assisted selection for powdery mildew resistance and to facilitate pyramiding powdery mildew resistance genes from various sources.     

The mode of inheritance in tetraploid cut roses

Tetraploid hybrid tea roses (Rosa hybrida) represent most of the commercial cultivars of cut roses and form the basis for breeding programmes. Due to intensive interspecific hybridizations, modern cut roses are complex tetraploids for which the mode of inheritance is not exactly known. The segregation patterns of molecular markers in a tetraploid mapping population of 184 genotypes, an F(1) progeny from a cross of two heterozygous parents, were investigated for disomic and tetrasomic inheritance. The possible occurrence of double reduction was studied as well. We can exclude disomic inheritance, but while our observations are more in line with a tetrasomic inheritance, we cannot exclude that there is a mixture of both inheritance modes. Two novel parental tetraploid linkage maps were constructed using markers known from literature, combined with newly generated markers. Comparison with the integrated consensus diploid map (ICM) of Spiller et al. (Theor Appl Genet 122:489-500, 2010) allowed assigning numbers to each of the linkage groups of both maps and including small linkage groups. So far, the possibility of using marker-assisted selection in breeding of tetraploid cut roses and of other species with a tetrasomic or partly tetrasomic inheritance, is still limited due to the difficulties in establishing marker-trait associations. We used these tetraploid linkage maps to determine associations between markers, two morphological traits and powdery mildew resistance. The knowledge on inheritance and marker-trait associations in tetraploid cut roses will be of direct use to cut rose breeding.     

Identification and validation of powdery mildew (Podosphaera xanthii)-resistant loci in recombinant inbred lines of cucumber (Cucumis sativus L.)

Powdery mildew limits cucumber production worldwide. Most resistant cucumber cultivars become susceptible to powdery mildew at low temperatures. Resistance within a wide temperature range is therefore desirable for cucumber production. We constructed a cucumber genetic linkage map based on a population of 111 recombinant inbred lines derived from a cross between CS-PMR1, with strong and temperature-independent resistance, and Santou, with moderate and temperature-dependent resistance. The map spans 693.0 cM and consists of 296 markers segregating into seven linkage groups; the markers include 289 simple sequence repeats (SSRs), six sequence characterized amplified regions, and one inter simple sequence repeat. Due to the presence of 150 common SSR markers, we were able to compare our map with previously published maps obtained by using populations derived from inter- or intra-variety crosses. We also evaluated powdery mildew resistance of the recombinant inbred lines and identified seven quantitative trait loci (QTL) contributed by CS-PMR1 and two QTL contributed by Santou. Four QTL (pm3.1, pm5.1, pm5.2 and pm5.3) were successfully validated by using populations derived from residual heterozygous lines. Some of the QTL identified in our study are in good agreement with previously published results obtained with materials of different origin. The markers reported here would be useful for introducing high and temperature-independent resistance by accumulation of QTL from CS-PMR1 and Santou.     

A genetic linkage map of water yam ( Dioscorea alata L.) based on AFLP markers and QTL analysis for anthracnose resistance

A genetic linkage map of the tetraploid water yam (Dioscorea alata L.) genome was constructed based on 469 co-dominantly scored amplified fragment length polymorphism (AFLP) markers segregating in an intraspecific F₁ cross. The F₁ was obtained by crossing two improved breeding lines, TDa 95/00328 as female parent and TDa 87/01091 as male parent. Since the mapping population was an F₁ cross between presumed heterozygous parents, marker segregation data from both parents were initially split into maternal and paternal data sets, and separate genetic linkage maps were constructed. Later, data analysis showed that this was not necessary and thus the combined markers from both parents were used to construct a genetic linkage map. The 469 markers were mapped on 20 linkage groups with a total map length of 1,233 cM and a mean marker spacing of 2.62 cM. The markers segregated like a diploid cross-pollinator population suggesting that the water yam genome is allo-tetraploid (2n = 4x = 40). QTL mapping revealed one AFLP marker E-14/M52-307 located on linkage group 2 that was associated with anthracnose resistance, explaining 10% of the total phenotypic variance. This map covers 65% of the yam genome and is the first linkage map reported for D. alata. The map provides a tool for further genetic analysis of traits of agronomic importance and for using marker-assisted selection in D. alata breeding programmes. QTL mapping opens new avenues for accumulating anthracnose resistance genes in preferred D. alata cultivars.