High throughput SNP genotyping with two mini-sequencing assays

Single nucleotide polymorphisms (SNPs) are veryimportant markers that can be used in many areas such asevolutionary genetics [1], disease-susceptibility genes[2,3], personalized medicine and forensics. Only about20% of human polymorphisms are length polymorphisms,whereas about 80% of human polymorphisms areSNPs. Kruglyak et al. [4] reported that there were about11,000,000 SNPs in the world population. There are many kinds of SNP genotyping technology[5,6]: some are only suitable to low …     

Utility and accuracy of template-directed dye-terminator incorporation with fluorescence-polarization detection for genotyping single nucleotide polymorphisms

There are little independent data available about how well single nucleotide polymorphism (SNP) genotyping technologies perform in the typical molecular genetics laboratory. We evaluated the utility and accuracy of a widely used technology, template-directed dye-terminator incorporation with fluorescence-polarization detection (FP-TDI), in a sample of 177 SNPs selected solely on the basis of map location. Genotypes were generated without optimization using standard protocols. Overall, 81% of the SNPs we studied generated readable genotypes by FP-TDI. Thirty-two SNPs were genotyped in duplicate by PCR-RFLP orfluorescent dye-terminator sequencing. Out of a total of 631 duplicate genotypes, no true discrepancies were detected. The true error rate has a 95% chance of lying between 0 and 6 out of 1000 genotypes. We also tested for deviations from Hardy-Weinberg Equilibrium in 33 SNPs genotyped in 50 unrelated individuals, and no significant deviations were detected. Our FP-TDI data were readily adaptable to automated genotype calling using our own method of cluster analysis, which assigns a probability score to each genotype call. We conclude that FP-TDI is both efficient and accurate. The method can easily fill the needs of SNP genotyping projects at the scale typically used for regional or candidate-gene association studies.     

Comparison of four flow cytometric SNP detection assays and their use in plant improvement

Single nucleotide polymorphisms (SNPs) are attractive DNA markers due to their abundance and potential for use in automated high-throughput genotyping. Numerous SNP genotyping assays have been developed, but it is unclear which assays are best suited and most efficient for various types of plant improvement research. The objective of this study was to compare the accuracy, efficiency, and cost of four SNP genotyping assays: single-base extension (SBE), allele-specific primer extension (ASPE), oligonucleotide ligation (OL), and direct hybridization (DH). All four assay methods used the same Luminex 100 flow cytometer platform. Fifty-eight F₂-derived soybean [Glycine max (L.) Merr.] lines from a cross between inbred lines G99-G725 and N00-3350 were genotyped at four SNPs. SBE and ASPE clearly differentiated between the two homozygotes and the heterozygote at each SNP. Results were in agreement with those identified using the SNaPshot minisequencing assay as a control. In contrast, the OL and DH assays were unable to differentiate between genotypes at some of the SNPs. However, when the cost per data point for the four different assays was compared, the cost of OL and DH was only about 70% of that for SBE, with DH requiring the least time of the four assays. On the basis of cost and labor, ASPE is more cost-effective and simpler than SBE, and would therefore be a good method for genetic mapping and diversity studies which require a large number of markers and a high level of multiplexing. DH appears to be the most economical assay for marker-assisted selection, though optimization for DH would be required for some SNP markers.     

Ligation detection reaction-TaqMan procedure for single nucleotide polymorphism detection on genomic DNA

In this article, we describe a genotyping approach applicable to both individual and multiplexed single nucleotide polymorphism (SNP) analysis, based on a ligation detection reaction (LDR) performed directly on genomic DNA. During the ligation, the biallelic state of the SNP locus is converted into a bimarker state of ligated detector oligonucleotides. The state of the markers is then determined by a 5'-nuclease assay (TaqMan) with universal fluorescent probes. The LDR-TaqMan method was successfully applied for the genotyping of 30 SNP loci of Arabidopsis thaliana. The technology is cost-effective, needs no locus-specific optimization, requires minimal manipulations, and has very good potential for automation.     

The TDI-FP assay in human Y chromosome SNP haplotyping

One of the many commercial technologies for genotyping single nucleotide polymorphisms (SNPs) is template direct dye-terminator incorporation with fluorescence-polarization (TDI-FP assay). It is a single-base extension assay followed by reading the fluorescence polarization values in an appropriate instrument. We have evaluated the suitability of the TDI-FP technique to detect haploid uniparentally inherited DNA polymorphisms on the nonrecombining portion of the Y chromosome. A sample of 47 individuals has been genotyped for 8 Y chromosome biallelic markers. The SNP typing was blindly duplicated by the denaturing high-performance liquid chromatography (DHPLC) technique for comparison. In the cases under examination the TDI-FP assay was able to resolve an allelic state fully. Such a result showed 100% concordance indicating how efficiently the TDI assay can be used to genotype Y chromosome DNA SNPs. However, a percentage of indeterminate genotypes remained unresolved by simple visual inspection: it varied from 0% to 11% depending on the SNP locus and on the success of amplification. This is consistent with previous findings. A maximum likelihood classificatory analysis allowed some of the indeterminate genotypes to be assigned and some potentially misclassified samples to be identified. Their percentage remains relatively high despite retyping and therefore alternative techniques for these noncompliant situations are required.     

应用FP-TDI技术进行高通量单核苷酸多态分型

FP-TDI (fluorescence polarization template-directed dye-terminator incorporation）是一种操作简单、实验投入少、适于高通量反应的单核苷酸多态等位基因分型技术.使用两种评价分型图像质量的数值指标,可以有效地对分型结果进行评价,使该技术得到了改进.在此基础上优化了实验条件,并应用该技术,对人类基因组3号染色体上随机选取的337个单核苷酸多态性位点进行了高通量分型,反应的一次成功率达到59.94%.     

Kinetic FP-TDI assay for SNP allele frequency determination

Strategies for identifying genetic risk factors in complex diseases by association studies require the comparison of allele frequencies of numerous SNPs between affected and control populations. Theoretically, hundreds of thousands of SNP markers across the genome will have to be genotyped in these studies. Genotyping SNPs one sample at a time is extremely costly and time consuming. To streamline whole genome association studies, some have proposed to screen SNPs by pooling the DNA samples initially for allele frequency determination and perform individual genotyping only when there is a significant discrepancy in allele frequencies between the affected and control populations. Here we describe a new method for determining the allele frequency of SNPs in pooled DNA samples using a two-color primer extension assay with real-time monitoring of fluorescence polarization (named kinetic FP-TDI assay). By comparing the ratio of the rate of incorporation of the two allele-specific dye-terminators, one can calculate the relative amounts of each allele in the pooled sample. The accuracy of allele frequency determination with pooled samples is within 3.3 +/- 0.8% of that determined by genotyping individual samples that make up the pool.     

Rapid identification of single nucleotide polymorphisms by fluorescence-based capillary electrophoresis

We describe the application of two different fluorescence-based techniques (ddNTP primer extension and single-strand conformation polymorphism (SSCP)) to the detection of single nucleotide polymorphisms (SNPs) by capillary electrophoresis. The ddNTP primer extension technique is based on the extension, in the presence of fluorescence-labeled dideoxy nucleotides (ddNTP, terminators), of an unlabeled oligonucleotide primer that binds to the complementary template immediately adjacent to the mutant nucleotide position. Given that there are no unlabeled dNTPs, a single ddNTP is added to its 3' end, resulting in a fluorescence-labeled primer extension product which is readily separated by capillary electrophoresis. On the other hand, the non-radioisotopic version of SSCP established in this study uses fluorescent dye to label the PCR products, which are also analyzed by capillary electrophoresis. These procedures were used to identify a well-defined SNP in exon 7 of the human p53 gene in DNA samples isolated from two human cell lines (CEM and THP-1 cells). The results revealed a heterozygous single-base transition (G to A) at nucleotide position 14071 in CEM cells, proving that both fluorescence-based ddNTP primer extension and SSCP are rapid, simple, robust, specific and with no ambiguity in interpretation for the detection of well-defined SNPs.     

Real-time genotyping with oligonucleotide probes containing locked nucleic acids

Oligonucleotide probes containing locked nucleic acid (LNA) hybridize to complementary single-stranded target DNA sequences with an increased affinity compared to oligonucleotide DNA probes. As a consequence of the incorporation of LNA residues into the oligonucleotide sequence, the melting temperature of the oligonucleotide increases considerably, thus allowing the successful use of shorter LNA probes as allele-specific tools in genotyping assays. In this article, we report the use of probes containing LNA residues for the development of qualitative fluorescent multiplex assays for the detection of single nucleotide polymorphisms (SNPs) in real-time polymerase chain reaction using the 5'-nuclease detection assay. We developed two applications that show the improved specificity of LNA probes in assays for allelic discrimination. The first application is a four-color 5'-nuclease assay for the detection of SNPs for two of the most common genetic factors involved in thrombotic risk, factor V Leiden and prothrombin G20210A. The second application is a two-color assay for the specific detection of the A-to-T tranversion in codon 6 of the beta-globin gene, responsible for sickle cell anemia. Both real-time genotyping assays were evaluated by comparing the performance of our method to that of a reference method and in both cases, we found a 100% concordance. This approach will be useful for research and molecular diagnostic laboratories in situations in which the specificity provided by oligonucleotide DNA probes is insufficient to discriminate between two DNA sequences that differ by only one nucleotide.     

Whole-genome genotyping with the single-base extension assay

We describe an efficient, accurate and robust whole-genome genotyping (WGG) assay based on a two-color, single-base extension (SBE), single-nucleotide polymorphism (SNP)-scoring step. We report genotyping results for biallelic International HapMap quality control (QC) SNPs using a single probe per locus. We show scalability, throughput and accuracy of the system by resequencing homozygous loci from our 100k Human-1 Genotyping BeadChip.     

SNP genotyping using alkali cleavage of RNA/DNA chimeras and MALDI time-of-flight mass spectrometry

Single nucleotide polymorphisms (SNPs) are now widely used for many DNA analysis applications such as linkage disequilibrium mapping, pharmacogenomics and traceability. Many methods for SNP genotyping exist with diverse strategies for allele-distinction. Mass spectrometers are used most commonly in conjunction with primer extension procedures with allele-specific termination. Here we present a novel concept for allele-preparation for SNP genotyping. Primer extension is carried out with an extension primer positioned immediately upstream of the SNP that is to be genotyped, a complete set of four ribonucleotides and a ribonucleotide incorporating DNA polymerase. The allele-extension products are then treated with alkali, which results in the cleavage immediately after the first added ribonucleotide. In addition, to obtain fragments easily detectable by mass spectrometry, we have included a ribonucleotide in the primer usually at the fourth nucleotide from the 3′ terminus. The method was tested on four SNPs each with a different combination of nucleotides. The advantage over other mass spectrometry-based SNP genotyping assays is that this one only requires a PCR, a primer extension reaction with a universal extension mix and an inexpensive facile cleavage reaction, which makes it overall very cost effective and easy in handling.     

Development of a single tube 640-plex genotyping method for detection of nucleic acid variations on microarrays

Detection of DNA sequence variation is critical to biomedical applications, including disease genetic identification, diagnosis and treatment, drug discovery and forensic analysis. Here, we describe an arrayed primer extension-based genotyping method (APEX-2) that allows multiplex (640-plex) DNA amplification and detection of single nucleotide polymorphisms (SNPs) and mutations on microarrays via four-color single-base primer extension. The founding principle of APEX-2 multiplex PCR requires two oligonucleotides per SNP/mutation to generate amplicons containing the position of interest. The same oligonucleotides are then subsequently used as immobilized single-base extension primers on a microarray. The method described here is ideal for SNP or mutation detection analysis, molecular diagnostics and forensic analysis. This robust genetic test has minimal requirements: two primers, two spots on the microarray and a low cost four-color detection system for the targeted site; and provides an advantageous alternative to high-density platforms and low-density detection systems.     

Homogeneous scoring of single-nucleotide polymorphisms: comparison of the 5'-nuclease TaqMan assay and Molecular Beacon probes

Homogeneous assays based on real-time fluorescence monitoring during PCR are relevant alternatives for large-scale genotyping of single-nucleotide polymorphisms (SNPs). We compared the performance of the homogeneous TaqMan 5'-nuclease assay and the Molecular Beacon assay using three SNPs in the human estrogen receptor gene as targets. When analyzing a panel of 90 DNA samples, both assays yielded a comparable power of discrimination between the genotypes of a C-to-T transition in codon 10 and a G-to-A transition in codon 594 of the estrogen receptor gene. The Molecular Beacon probes distinguished better than the TaqMan probes between homozygous and heterozygous genotypes of a C-to-G transversion in codon 325. The sensitivity of detecting one allele, present as a minority in a mixed sample, varied between the SNPs and was similar for both assays. With the Molecular Beacon assay, the measured signal ratios were proportional to the amount of the minor allele over a wider range than with the TaqMan assay at all three SNPs.     

Multiplex single nucleotide polymorphisms genotyping using solid-phase single base extension on magnetic nanoparticles

To fulfill the increasing need for large-scale genetic research, we have developed a new solid-phase single base extension (SBE) protocol on magnetic nanoparticles (MNPs) for multiplex SNP detection using adapter polymerase chain reaction (PCR) products as templates. Extension primers were covalently immobilized on the MNPs, and allele-specific extension took place along the stretch of target DNA for one-color ddNTP incorporation. The MNPs with fluorophores were spotted on a glass slide to fabricate a “bead array” to discriminate their genotypes. Eight SNP loci of three DNA samples were interrogated, and the experiment demonstrated that it is an efficient method for large-scale SNP genotyping.     

High-throughput SNP genotyping by single-tube PCR with Tm-shift primers

Despite many recent advances in high-throughput single nucleotide polymorphism (SNP) genotyping technologies, there is still a great need for inexpensive and flexible methods with a reasonable throughput. Here we report substantial modifications and improvements to an existing homogenous allele-specific PCR-based SNP genotyping method, making it an attractive new option for researchers engaging in candidate gene studies or following up on genome-wide scans. In this advanced version of the melting temperature (Tm)-shift SNP genotyping method, we attach two GC-rich tails of different lengths to allele-specific PCR primers, such that SNP alleles in genomic DNA samples can be discriminated by the Tms of the PCR products. We have validated 306 SNP assays using this method and achieved a success rate in assay development of greater than 83% under uniform PCR conditions. We have developed a standalone software application to automatically assign genotypes directly from melting curve data. To demonstrate the accuracy of this method, we typed 592 individuals for 6 SNPs and showed a high call rate (>98%) and high accuracy (>99.9%). With this method, 6-10,000 samples can be genotyped per day using a single 384-well real-time thermal cycler with 2-4 standard 384-well PCR instruments.     

A new approach to SNP genotyping with fluorescently labeled mononucleotides

Fluorescence resonance energy transfer (FRET) is one of the most powerful and promising tools for single nucleotide polymorphism (SNP) genotyping. However, the present methods using FRET require expensive reagents such as fluorescently labeled oligonucleotides. Here, we describe a novel and cost-effective method for SNP genotyping using FRET. The technique is based on allele-specific primer extension using mononucleotides labeled with a green dye and a red dye. When the target DNA contains the sequence complementary to the primer, extension of the primer incorporates the green and red dye-labeled nucleotides into the strand, and red fluorescence is emitted by FRET. In contrast, when the 3′ end nucleotide of the primer is not complementary to the target DNA, there is no extension of the primer, or FRET signal. Therefore, discrimination among genotypes is achieved by measuring the intensity of red fluorescence after the extension reaction. We have validated this method with 11 SNPs, which were successfully determined by end-point measurements of fluorescence intensity. The new strategy is simple and cost-effective, because all steps of the preparation consist of simple additions of solutions and incubation, and the dye-labeled mononucleotides are applicable to all SNP analyses. This method will be suitable for large-scale genotyping.     

FP-TDI SNP scoring by manual and statistical procedures: a study of error rates and types

For technologies that are commonly used in ordinary laboratories such as fluorescence-polarization detection with template-directed, dye-terminator incorporation (FP-TDI), SNP genotype scoring is usually done manually. Here we study rates of errors and missing genotypes obtained with this procedure. We also introduce three statistical genotype scoring methods to examine whether they form a viable alternative. Data consisted of eight SNPs typed in about 1400 individuals from 268 pedigrees. The statistical procedures performed better on several internal criteria, such as the number of Mendelian errors, and showed much higher agreement with discrepant genotypes re-scored by two raters. The best results were obtained with the statistical procedure that incorporated information about regularities in the error structure of the FP-TDI data. We estimated that there were about 1.6% more errors if genotypes were scored manually. About 0.6% of these errors could be explained by data manipulation errors, leaving 1% as the result of possible incorrect scoring. There were 3.3% more missing genotypes in the manual scoring due to errors in data manipulation (1.7%) and conservative scoring (1.6%).     

SNP genotyping on a genome-wide amplified DOP-PCR template

With the increasing demand for higher throughput single nucleotide polymorphism (SNP) genotyping, the quantity of genomic DNA often falls short of the number of assays required. We investigated the use of degenerate oligonucleotide primed polymerase chain reaction (DOP-PCR) to generate a template for our SNP genotyping methodology of fluorescence polarization template-directed dye-terminator incorporation detection. DOP-PCR employs a degenerate primer (5′-CCGACTCGAGNNNNNNATGTGG-3′) to produce non-specific uniform amplification of DNA. This approach has been successfully applied to microsatellite genotyping. We compared genotyping of DOP-PCR-amplified genomic DNA to genomic DNA as a template. Results were analyzed with respect to feasibility, allele loss of alleles, genotyping accuracy and storage conditions in a high-throughput genotyping environment. DOP-PCR yielded overall satisfactory results, with a certain loss in accuracy and quality of the genotype assignments. Accuracy and quality of genotypes generated from the DOP-PCR template also depended on storage conditions. Adding carrier DNA to a final concentration of 10 ng/µl improved results. In conclusion, we have successfully used DOP-PCR to amplify our genomic DNA collection for subsequent SNP genotyping as a standard process.     

Development of multiplex DNA electronic microarrays using a universal adaptor system for detection of single nucleotide polymorphisms

The NanoChip electronic microarray is designed for the rapid detection of genetic variation in research and clinical diagnosis. We have developed a multiplex electronic microarray assay, specific for single nucleotide polymorphism (SNP) genotyping and mutation detection, using universal adaptor sequences tailed to the 5' end of PCR primers specific to each target. PCR products, amplified by primers directed to the universal adaptor sequence, are immobilized on the microarray either directly or via capture oligonucleotides complementary to the universal adaptor sequence. This simple modification results in a significant increase in fidelity with improved specificity and accuracy. In addition, the multiplexing of genetic variant detection allows increased throughput and significantly reduced cost per assay. This general schema can also be applied to other microarray and macroarray formats.     

High-throughput SNP genotyping

Whole genome approaches using single nucleotide polymorphism (SNP) markers have the potential to transform complex disease genetics and expedite pharmacogenetics research. This has led to a requirement for high-throughput SNP genotyping platforms. Development of a successful high-throughput genotyping platform depends on coupling reliable assay chemistry with an appropriate detection system to maximise efficiency with respect to accuracy, speed and cost. Current technology platforms are able to deliver throughputs in excess of 100 000 genotypes per day, with an accuracy of >99%, at a cost of 20-30 cents per genotype. In order to meet the demands of the coming years, however, genotyping platforms need to deliver throughputs in the order of one million genotypes per day at a cost of only a few cents per genotype. In addition, DNA template requirements must be minimised such that hundreds of thousands of SNPs can be interrogated using a relatively small amount of genomic DNA. As such, it is predicted that the next generation of high-throughput genotyping platforms will exploit large-scale multiplex reactions and solid phase assay detection systems.