化学改性甘蔗渣对固定化细胞发酵产丁醇的影响

旨在研究化学改性的甘蔗渣作为固定化载体对丙酮丁醇梭菌Clostridium acetobutylicum XY16发酵制备生物丁醇的影响。首先利用不同浓度的聚乙烯亚胺(PEI)和1 g/L戊二醛(GA)对甘蔗渣表面进行化学改性,增强甘蔗渣对Clostridium acetobutylicum XY16的附载能力。经4 g/L聚乙烯亚胺和1 g/L戊二醛改性的甘蔗渣(添加量10 g/L)应用到固定化批次发酵中,发酵36 h后丁醇和总溶剂浓度最高,分别达到了12.24 g/L和21.67 g/L,同时溶剂的生产速率达到0.60 g/(L·h),生产速率比游离细胞和未改性甘蔗渣固定化细胞分批发酵分别提高了130.8%和66.7%。在此基础上对改性甘蔗渣固定化的细胞进行6次重复批次发酵,丁醇和总溶剂的产量稳定,溶剂生产速率逐渐提高至0.83 g/(L·h),同时转化率也提高至0.42 g/g。     

Characterization of hydrogen production by engineered Escherichia coli strains using rich defined media

Fermentation conditions (e.g., pressure and medium) are well-documented to impact the yield of microbial products in bioreactors. In this study we used carefully controlled batch fermentations to characterize hydrogen production from engineered strains of Escherichia coli and developed a rapid method of inducing hydrogen production in previously aerobically grown cells by using a rich defined medium. Our results indicated that rich defined media activated hydrogen production from aerobic pre-cultures with no lag time and yielded more hydrogen and biomass than the commonly used minimal media. Under these conditions, deletion of both uptake hydrogenase 1 (ΔhyaAB) and hydrogenase 2 (ΔhybABC) was shown to increase hydrogen yield from glucose by 10% over the wildtype strain BW25113. However, the deletion of the repressor for the formate-hydrogen-lyase (FHL-1) complex (ΔhycA) did not further increase hydrogen production. Additional deletion of lactate dehydrogenase (ldhA) and fumarate reductase (frdBC) of the mixed-acid fermentation pathway increased hydrogen yield by 22 and 23%, respectively. Interestingly, combined elimination of ldhA and frdBC in the uptake and hycA null strain increased hydrogen yield from 1.37 to 1.82 mol/mol glucose, obtaining 91% of the theoretical maximum hydrogen yield. Our results indicated the advantage of using rich defined media for inducing hydrogen production. This study represents the first report of characterizing metabolically engineered E. coli strains in batch hydrogen fermentation using rich defined media under tightly controlled conditions.     

Production of SCP and cellulase by Aspergillus terreus from bagasse substrate

The fermentation of 1.0% untreated bagasse under optimum cultural and nutritional conditions with Aspergillus terreus GN1 indicated that the maximum rate of protein and cellulase production could be obtained during three days of submerged fermentation. Even though 16.4% protein recovery, 0.55 units CMCase/mL, and 0.027 FPase units/mL were obtained on the seventh day, the rates of increase in protein recovery and cellulase production were slower than those obtained up to these days, which were 14.3% protein recovery, 0.45 units CMCase/mL, and 0.019 units FPase/mL. There was an initial lag in the utilization of cellulose up to two days due to the utilization of the water-soluble carbohydrate present in untreated bagasse. Cellulose utilization and water-soluble carbohydrate content during fermentation were correlated with protein recovery and enzyme production. The protein and cellulase production during three days fermentation with 1.0% untreated and treated bagasse were compared and the protein content of the total biomass was calculated and treated bagasse were compared and the protein content of the biomass was calculated into constituent protein contributed by the fungal mycelium and the under graded bagasse. The total biomass recovered with untreated and treated bagasse was 1020 and 820 mg/g bagasse substrate, respectively, and contained 14.3 and 20.6% crude protein, respectively. The contribution of fungal biomass and under graded bagasse was 309 and 711, and 373 and 447 mg/g untreated and treated bagasse substrates, respectively. In an 8-L-flask trial during three days of fermentation, the recovery of SCP and cellulase were 66 g and 32,400 units (Sigma) for treated bagasse and 82 g and 8200 units (Sigma) for untreated bagasse, respectively.     

Saccharification and fermentation of Sugar Cane bagasse by Klebsiella oxytoca P2 containing chromosomally integrated genes encoding the Zymomonas mobilis ethanol pathway

Pretreatment of sugar cane bagasse is essential for a simultaneous saccharification and fermentation (SSF) process which uses recombinant Klebsiella oxytoca strain P2 and Genencor Spezyme CE. Strain P2 has been genetically engineered to express Zymomonas mobilis genes encoding the ethanol pathway and retains the native ability to transport and metabolize cellobiose (minimizing the need for extracellular cellobiase). In SSF studies with this organism, both the rate of ethanol production and ethanol yield were limited by saccharification at 10 and 20 filter papaer units (FPU) g(-1) acid-treated bagasse. Dilute slurries of biomass were converted to ethanol more efficiently (over 72% of theoretical yield) in simple batch fermentations than slurries containing high solids albeit with the production of lower levels of ethanol. With high solids (i.e., 160 g acid-treated bagasse L(-1)), a combination of 20 FPU cellulase g(-1) bagasse, preincubation under saccharification conditions, and additional grinding (to reduce particle size) were required to produce ca. 40 g ethanol L(-1). Alternatively, almost 40 g ethanol L(-1) was produced with 10 FPU cellulase g(-1) bagasse by incorporating a second saccharification step (no further enzyme addition) followed by a second inoculation and short fermentation. In this way, a theoretical ethanol yield of over 70% was achieved with the production of 20 g ethanol 800 FPU(-1) of commercial cellulase. (c) 1994 John Wiley & Sons, Inc.     

Effect of nutritional factors on cellulase enzyme and microbial protein production by Aspergillus terreus and its evaluation

The biomass yield, cellulolytic activity, and protein recovery using Aspergillus terreus GN1 with alkali-treated sugarcane bagasse was studied using different levels (250-600 mg of N/L of broth) of organic and inorganic nitrogen sources. e.g., cattle urine, urea, cornsteep liquor, ammonium sulfate, ammonium nitrate, ammonium iron sulfate, ammonium chloride, and sodium nitrate. Among different levels of alkali-treated bagasse substrate concentrations (0.5-4.0% w/v) tested, 1.0% substrate yielded the highest crude protein content, protein recovery, and cellulolytic activity. The biomass recovery with 1.0% substrate ranged from 290-380 mg/500 mg bagasse substrate in a 50-mL broth with a nitrogen level of 250-600 mg of N/L in all the sources except ammonium iron sulfate, which yielded 402-439 mg/500 mg bagasse substrate. However, crude protein content of biomass obtained with an ammonium iron sulfate nitrogen source was the lowest. Cornsteep liquor nitrogen source at the rate of 600 mg of N/L yielded the maximum crude protein of 32.9%, protein recovery of 22.2 g/100 g of bagasse, and carboxymethyl cellulase and filter paper enzyme activities of 1.1 and 0.09 units/mL, among the organic and inorganic nitrogen sources studied. In general, the organic nitrogen sources and inorganic nonammonium nitrogen sources were utilized preferentially for protein production over the inorganic ammonium nitrogen sources. The fermentation time required under optimum cultural and nutritional conditions for A. terreus GN1 was also evaluated. The crude protein content of the biomass increased gradually up to the seventh day of fermentation, but the protein recovery rate was high up to two or three days. It was observed that the cellulose utilization rate increased after an initial lag of one day up to the third day and gradually increased further, which corresponded positively with protein content, biomass protein recovery, and cellulase enzyme activity. On the seventh day of fermentation, the crude protein content, biomass protein recovery, water-soluble carbohydrate, bagasse cellulose utilization, CMCase, and FPase activities were 32.8%, 20.1 g/100 g of bagasse, 6.2%, 82.7%, 1.0. and 0.08 U/mL, respectively. The final biomass recovered contained 32.8% crude protein content and had an in vitro rumen digestibility (IVRD) coefficient of 68.8%. The biomass contained almost all the essential and nonessential amino acids and was comparable with FAO reference protein. It is concluded that a fermentation time of 72 h gave a faster rate of protein production of 16.9 g/100 g of bagasse with 69.8% bagasse cellulose utilization with 76.0% IVRD. and contained almost all the essential and nonessential amino acids.     

发酵生物制氢研究进展

综述了近年来发酵生物制氢领域的研究进展?在菌种方面,除了对现有产氢菌种的深入研究外,还采用生物学,分子生物学及生物信息学手段建立产氢菌种库;在氢酶的研究方面,已逐步从基因确定、功能研究拓展到基因工程构建高效产氢菌研究：而在与废弃生物质处理相结合的反应过程方面,研究主要集中在利用不同种类的废弃物的产氢和高效产氢反应器上。此外,还初步总结了目前对发酵制氢可行性和经济性的评价,并对其发展方向提出了新的看法。     

Continuous Fermentation in high flow rate fermenter systems

In commercial batch processes the productivity of product formation is low. But a significant increase of productivity can be achieved in continuous fermentations. By using high flow rate fermenter systems characterized by a relatively long retention time of biomass in comparison with the retention time of the liquid we can realize a high-performance fermentation. The problem of holding back the biomass within the reactor could be solved by means of membranes being impenetrable to the cells, but permeable to the hydraulic phase. Such a process technology was successfully tested for its applicability in alcoholic and lactic acid fermentations. The maximum productivities obtained on this way were ? = 120 g/l. · h for ethanol production and ? = 51 g/l. h for lactic acid fermentation, respectively.     

Multiblock PLS analysis of an industrial pharmaceutical process

The performance of an industrial pharmaceutical process (production of an active pharmaceutical ingredient by fermentation, API) was modeled by multiblock partial least squares (MBPLS). The most important process stages are inoculum production and API production fermentation. Thirty batches (runs) were produced according to an experimental planning. Rather than merging all these data into a single block of independent variables (as in ordinary PLS), four data blocks were used separately (manipulated and quality variables for each process stage). With the multiblock approach it was possible to calculate weights and scores for each independent block. It was found that the inoculum quality variables were highly correlated with API production for nominal fermentations. For the nonnominal fermentations, the manipulations of the fermentation stage explained the amount of API obtained (especially the pH and biomass concentration). Based on the above process analysis it was possible to select a smaller set of variables with which a new model was built. The amount of variance predicted of the final API concentration (cross-validation) for this model was 82.4%. The advantage of the multiblock model over the standard PLS model is that the contributions of the two main process stages to the API volumetric productivity were determined.     

Anaerobic thermophilic fermentation for carboxylic acid production from in-storage air-lime-treated sugarcane bagasse

Wet storage and in situ lime pretreatment (50 °C, 1-atm air, 56 days, excess lime loading of 0.3 g Ca(OH)₂/g dry biomass) of sugarcane bagasse (4,000 g dry weight) was performed in a bench-scale pile pretreatment system. Under thermophilic conditions (55 °C, NH₄HCO₃ buffer, methane inhibitors), air-lime-treated bagasse (80 wt.%) and chicken manure (20 wt.%) were anaerobically co-digested in 1-L rotary fermentors by a mixed culture of marine microorganisms (Galveston, TX). During four-stage countercurrent fermentation, the resulting carboxylic acids consisted of primarily acetate (average 87.7 wt.%) and butyrate (average 9.0 wt.%). The experimental fermentation trains had the highest yield (0.47 g total acids/g volatile solids (VS) fed) and highest selectivity (0.79 g total acids/g VS digested) at a total acid concentration of 28.3 g/L, which is equivalent to an ethanol yield of 105.2 gal/(tonne VS fed). Both high total acid concentrations (>44.7 g/L) and high substrate conversions (>77.5%) are predicted for countercurrent fermentations of bagasse at commercial scale, allowing for an efficient conversion of air-lime-treated biomass to liquid transportation fuels and chemicals via the carboxylate platform.     

Simulation of integrated first and second generation bioethanol production from sugarcane: comparison between different biomass pretreatment methods

Sugarcane bagasse is used as a fuel in conventional bioethanol production, providing heat and power for the plant; therefore, the amount of surplus bagasse available for use as raw material for second generation bioethanol production is related to the energy consumption of the bioethanol production process. Pentoses and lignin, byproducts of the second generation bioethanol production process, may be used as fuels, increasing the amount of surplus bagasse. In this work, simulations of the integrated bioethanol production process from sugarcane, surplus bagasse and trash were carried out. Selected pre-treatment methods followed, or not, by a delignification step were evaluated. The amount of lignocellulosic materials available for hydrolysis in each configuration was calculated assuming that 50% of sugarcane trash is recovered from the field. An economic risk analysis was carried out; the best results for the integrated first and second generation ethanol production process were obtained for steam explosion pretreatment, high solids loading for hydrolysis and 24–48 h hydrolysis. The second generation ethanol production process must be improved (e.g., decreasing required investment, improving yields and developing pentose fermentation to ethanol) in order for the integrated process to be more economically competitive.     

Techno‐economic evaluation of a two‐step biological process for hydrogen production

An integrated biological process for the production of hydrogen based on thermophilic and photo‐heterotrophic fermentation was evaluated from a technical and economic standpoint. Besides the two fermentation steps the process also includes pretreatment of the raw material (potato steam peels) and purification of hydrogen using amine absorption. The study aimed neither at determining the absolute cost of biohydrogen nor at an economic optimization of the production process, but rather at studying the effects of different parameters on the production costs of biohydrogen as a guideline for future improvements. The effect of the key parameters, hydrogen productivity and yield and substrate concentration in the two fermentations on the cost of the hydrogen produced was studied. The selection of the process conditions was based mainly on laboratory data. The process was simulated by use of the software Aspen Plus and the capital costs were estimated using the program Aspen Icarus Process Evaluator. The study shows that the photo‐fermentation is the main contributor to the hydrogen production cost mainly because of the cost of plastic tubing, for the photo‐fermentors, which represents 40.5% of the hydrogen production cost. The costs of the capital investment and chemicals were also notable contributors to the hydrogen production cost. Major economic improvements could be achieved by increasing the productivity of the two fermentation steps on a medium‐term to long‐term scale. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

甘蔗渣和糖蜜混合发酵制备燃料丁醇

以抗逆突变株Clostridium beijerinckii IB4为研究对象,葡萄糖为C源,对其进行补料分批发酵过程的优化,同时将该优化工艺应用于甘蔗渣和糖蜜混合发酵制备燃料丁醇。结果表明:在5 L发酵罐中,先加入作为还原糖的甘蔗渣酸解糖液10 g/L,16 h后补加甘蔗糖蜜30 g/L,于35℃、100 r/min发酵50 h,丁醇和总溶剂产量分别达到11.1和15.3 g/L,丁醇比例高达72.5%。     

Kefir yeast technology: scale-up in SCP production using milk whey

A three-step process to scale-up kefir biomass production at a semi-industrial scale employing whey is reported. Aerobic fermentations were initially performed at laboratory scales, in 1.5- and 4-L bioreactors, yielding 79 g/L final kefir biomass (0.89 g/g of lactose utilized), in 7 h of fermentation time. The use of whey as carbon source even in solid cultures led to the formation of a granular biomass. These results encouraged scale-up at a semi-industrial-scale pilot plant employing 100- and 3,000-L bioreactors, leading to the development of a process for granular kefir biomass production. The results validated the laboratory-scale experiments and the avoidance of centrifugal separators due to granular biomass formation. Pilot-plant operations showed kefir to be highly resistant to contamination under actual industrial conditions and no serious problems in handling of raw materials and equipment were observed. Economic analysis showed a 20% higher cost of the market price of products, with added value of up to 15.9 x 10(9) within the European Union.     

Modeling product formation in anaerobic mixed culture fermentations

The anaerobic conversion of organic matter to fermentation products is an important biotechnological process. The prediction of the fermentation products is until now a complicated issue for mixed cultures. A modeling approach is presented here as an effort to develop a methodology for modeling fermentative mixed culture systems. To illustrate this methodology, a steady-state metabolic model was developed for prediction of product formation in mixed culture fermentations as a function of the environmental conditions. The model predicts product formation from glucose as a function of the hydrogen partial pressure (P(H2)), reactor pH, and substrate concentration. The model treats the mixed culture as a single virtual microorganism catalyzing the most common fermentative pathways, producing ethanol, acetate, propionate, butyrate, lactate, hydrogen, carbon dioxide, and biomass. The product spectrum is obtained by maximizing the biomass growth yield which is limited by catabolic energy production. The optimization is constrained by mass balances and thermodynamics of the bioreactions involved. Energetic implications of concentration gradients across the cytoplasmic membrane are considered and transport processes are associated with metabolic energy exchange to model the pH effect. Preliminary results confirmed qualitatively the anticipated behavior of the system at variable pH and P(H2) values. A shift from acetate to butyrate as main product when either P(H2) increases and/or pH decreases is predicted as well as ethanol formation at lower pH values. Future work aims at extension of the model and structural validation with experimental data.     

The production of molecular hydrogen byEscherichia coli during ampicillin-induced spheroplast formation

Summary The present study examined the effects of ampicillin-induced spheroplast formation on the production of molecular hydrogen byEscherichia coli carrying out fermentation in a lactosepeptone broth with an osmolality of 342 mosmol/l. The effects were most pronounced during the transformation of bacterial cells to spheroplasts. It was shown that the lower production rate of molecular hydrogen by spheroplastic cells is due not only to a suggested decrease in mixed-acid fermentation but also to a reduction in hydrogenlyase activity.     

Citrate catabolism and production of acetate and succinate by Lactobacillus helveticus ATCC 15807

The citrate metabolism of Lactobacillus helveticus ATCC 15807 was studied under controlled-pH fermentations at pH 4.5 and pH 6.2. The micro-organism was able to co-metabolize citrate and lactose at both pH from the beginning of growth, which enhanced the rate of lactose consumption and lactic acid production, compared with cultures without citrate. The effect of citrate on cell growth was dependent on the balance between the ratio of dissociated to non-dissociated forms of the acetic acid produced and the extra ATP gained by the cells, both facts related to the citrate metabolism. The citrate catabolism determined a change in the fermentation pattern of L. helveticus ATCC 15807 from homolactic to a mixed-acid profile, regardless of the external pH. Within this new fermentation pattern, acetate was the major product formed (13–20 mM), followed by succinate (2.4–3.7 mM), while acetoine, dyacetile or butanediol were not detected. The mixed-acid profile displayed by L. helveticus ATCC 15807 was linked to NADH₂ oxidase activity rather than the acetate kinase enzyme.     

Lactic acid production from sugarcane bagasse hydrolysates by Lactobacillus pentosus: Integrating xylose and glucose fermentation

Lactic acid, traditionally obtained through fermentation process, presents numerous applications in different industrial segments, including production of biodegradable polylactic acid (PLA). Development of low cost substrate fermentations could improve economic viability of lactic acid production, through the use of agricultural residues as lignocellulosic biomass. Studies regarding the use of sugarcane bagasse hydrolysates for lactic acid production by Lactobacillus spp. are reported. First, five strains of Lactobacillus spp. were investigated for one that had the ability to consume xylose efficiently. Subsequently, biomass fractionation was performed by dilute acid and alkaline pretreatments, and the hemicellulose hydrolysate (HH) fermentability by the selected strain was carried out in bioreactor. Maximum lactic acid concentration and productivity achieved in HH batch were 42.5 g/L and 1.02 g/L h, respectively. Hydrolyses of partially delignified cellulignin (PDCL) by two different enzymatic cocktails were compared. Finally, fermentation of HH and PDCL hydrolysate together was carried out in bioreactor in a hybrid process: saccharification and co-fermentation with an initial enzymatic hydrolysis. The high fermentability of these process herein developed was demonstrated by the total consumption of xylose and glucose by Lactobacillus pentosus, reaching at 65.0 g/L of lactic acid, 0.93 g/g of yield, and 1.01 g/L h of productivity. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 35: e2718, 2019     

Bioconversion of wheat stalk to hydrogen by dark fermentation: effect of different mixed microflora on hydrogen yield and cellulose solubilisation

This study determined hydrogen production, volatile fatty acids (VFAs) generation and cellulose solubilisation from anaerobic dark fermentation of wheat stalk and showed the effect of different mixed microflora. The cumulative hydrogen yields of anaerobic digested activated sludge (AS)-inoculated and anaerobic digested dairy manure (DM)-inoculated system were 23.3 and 37.0 mL/g VS at 204 h, respectively. A modified Gompertz equation was able to adequately describe the production of hydrogen from the batch fermentation by both mixed microflora. During the process, acetate and butyrate accounted for more than 76.1% of total VFAs for both fermentations. The extent of cellulose solubilisation approached 46.6% and 75.2% for AS- and DM-inoculated fermentation, respectively. The X-ray diffraction (XRD) showed that the crystallinities of both fermented stalks were partly disrupted by the mixed microflora, and DM-inoculated fermentation had more disruption than AS-inoculated one.     

Biomass content governs fermentation rate in nitrogen-deficient wine musts

Problematic fermentations are common in the wine industry. Assimilable nitrogen deficiency is the most prevalent cause of sluggish fermentations and can reduce fermentation rates significantly. A lack of nitrogen diminishes a yeast's metabolic activity, as well as the biomass yield, although it has not been clear which of these two interdependent factors is more significant in sluggish fermentations. Under winemaking conditions with different initial nitrogen concentrations, metabolic flux analysis was used to isolate the effects. We quantified yeast physiology and identified key metabolic fluxes. We also performed cell concentration experiments to establish how biomass yield affects the fermentation rate. Intracellular analysis showed that trehalose accumulation, which is highly correlated with ethanol production, could be responsible for sustaining cell viability in nitrogen-poor musts independent of the initial assimilable nitrogen content. Other than the higher initial maintenance costs in sluggish fermentations, the main difference between normal and sluggish fermentations was that the metabolic flux distributions in nitrogen-deficient cultures revealed that the specific sugar uptake rate was substantially lower. The results of cell concentration experiments, however, showed that in spite of lower sugar uptake, adding biomass from sluggish cultures not only reduced the time to finish a problematic fermentation but also was less likely to affect the quality of the resulting wine as it did not alter the chemistry of the must.     

Biomass Content Governs Fermentation Rate in Nitrogen-Deficient Wine Musts

Problematic fermentations are common in the wine industry. Assimilable nitrogen deficiency is the most prevalent cause of sluggish fermentations and can reduce fermentation rates significantly. A lack of nitrogen diminishes a yeast's metabolic activity, as well as the biomass yield, although it has not been clear which of these two interdependent factors is more significant in sluggish fermentations. Under winemaking conditions with different initial nitrogen concentrations, metabolic flux analysis was used to isolate the effects. We quantified yeast physiology and identified key metabolic fluxes. We also performed cell concentration experiments to establish how biomass yield affects the fermentation rate. Intracellular analysis showed that trehalose accumulation, which is highly correlated with ethanol production, could be responsible for sustaining cell viability in nitrogen-poor musts independent of the initial assimilable nitrogen content. Other than the higher initial maintenance costs in sluggish fermentations, the main difference between normal and sluggish fermentations was that the metabolic flux distributions in nitrogen-deficient cultures revealed that the specific sugar uptake rate was substantially lower. The results of cell concentration experiments, however, showed that in spite of lower sugar uptake, adding biomass from sluggish cultures not only reduced the time to finish a problematic fermentation but also was less likely to affect the quality of the resulting wine as it did not alter the chemistry of the must.