Characteristic properties of the frame-antenna-produced RF discharge evolution in the Uragan-3M torsatron

In the ? = 3 Uragan-3M torsatron, hydrogen plasma is produced and heated by RF fields in the Alfvén range of frequencies (ω ? ω _ci ). To this end, a frame antenna with a broad spectrum of generated parallel wavenumbers is used. The RF discharge evolution is studied experimentally at different values of the RF power fed to the antenna (the anode voltage of the oscillator and the antenna current) and the initial pressure of the fueling gas. It is shown that, depending on the antenna current and hydrogen pressure, the discharge can operate in two regimes differing in the plasma density, temperature, and particle loss. The change in the discharge regime with increasing anode voltage is steplike in character. The particular values of the anode voltage and pressure at which the change occurs are affected by RF preionization or breakdown stabilization by a microwave discharge. The obtained results will be used in future experiments to choose the optimal regimes of the frame-antenna-produced RF discharge as a target for the production and heating of a denser plasma by another, shorter wavelength three-half-turn antenna.     

Effect of Resonant Radiation Transport on the Parameters of RF and DC Discharges in a He-Ar-Xe Mixture

A study is made of the effect of the transport of Xe 147-nm resonant radiation on the parameters of a low-temperature plasma of DC and RF discharges in gas mixtures used as the working medium in lasers based on infrared transitions in xenon. RF discharges are treated in the planar geometry typical of slab lasers. DC discharges in tubes are treated in cylindrical geometry. The trapping of resonant radiation is described using different approximate models: the decay time approximation for a plasma slab (the Holstein approximation) and the effective lifetime approximation (the Biberman approximation). The transport equation for resonant radiation is solved numerically. The effect of the radiation transport on both the current-voltage characteristics of a discharge and the spatial distribution of the excited Xe atoms is investigated. The current-voltage characteristics calculated for a DC discharge with allowance for the resonant radiation transport agree well with the experimental characteristics. It is found that, for an RF discharge, the effective lifetime approximation overestimates the density of the excited Xe atoms near the electrodes by several times and underestimates this density at the midplane of the discharge gap.     

Process of commutation of a vacuum electric-discharge gap by laser plasma

The temporal parameters of a process of vacuum gap commutation under exposure to a nanosecond pulse of laser radiation incident on the cathode has been studied depending on the radiation energy. Based on the experiment data, it is suggested that a glow discharge is initially ignited in electrode erosion products under exposure to the laser pulse, which due to development of the ionization-overheating instability undergoes the contraction of current channel and transits to an arc discharge. With the radiation energy exceeding a threshold value, the radiation (incident on the cathode) accelerates directly the instability development and the glow discharge transition to the arc discharge due to the radiation absorption in the discharge plasma.     

Characteristics of molecular hydrogen and CH* radicals in a methane plasma in a magnetically enhanced capacitive RF discharge

The parameters of a methane-containing plasma in an asymmetric RF capacitive discharge in an external magnetic field were studied using optical emission spectroscopy. The power deposited in the discharge was 90 W and the gas pressure and magnetic field were varied in the ranges 1–5 Pa and 50–200 G, respectively. The vibrational and rotational temperatures of hydrogen molecules and CH* radicals were measured as functions of the magnetic field and methane pressure. The ratio between the densities of atomic and molecular hydrogen was estimated. The processes responsible for the excitation of molecular hydrogen and CH* radicals in a methane-containing plasma in an RF capacitive discharge are analyzed.     

Experimental study of radiation in the wavelength range 12.2–15.8 nm from a pulsed high-current plasma diode

Results are presented from experimental studies of the temporal and integral characteristics of radiation in the 12.2-to 15.8-nm spectral range from the anode region of an extended high-current (I ～ 30 kA) pulsed discharge in Sn vapor. It is found that the radiation pulse consists of intense spikes with a duration much shorter than the half-period of the discharge current. The spikes are shown to correlate with the onset of instability in the plasma column. It is supposed that the radiation spikes in the given wavelength range can be generated by a long-lived dense plasma core optimally supplied with energy. A method for achieving a highly efficient quasi-steady radiation regime is proposed.     

Attainment of the Pease-Braginskii current in an ultra-high-pressure discharge

Results are presented from experimental studies of the contraction of the channels of discharges in hydrogen and helium at current amplitudes of 0.5–1.6 MA and initial gas pressures of 5–35 MPa. The observed decrease in the brightness temperature of the discharge channel with increasing deposited energy is caused by the heating of the ambient gas. The channel contraction observed near the maximum of the discharge current is due to the attainment of the Pease-Braginskii critical current. Previously, it was shown that megampere discharges operate in a fully metallic plasma of the eroded electrodes. The theoretical value of the Pease-Braginskii current for discharges in vacuum is ～100–200 kA. The observed increase in the critical current to ～1 MA is attributed to the absorption of channel radiation in the dense ambient gas.     

Accumulation of products of ferroelectric target sputtering in the plasma of an RF glow discharge

The zone of macroparticle accumulation was revealed based on laser radiation scattering at copper vapor in the plasma of an RF glow discharge upon sputtering of multicomponent nanosize ferroelectric films. This zone was detected at the interface between the negative glow and the dark cathode space of the glow discharge. It is supposed that these particles are charged products of ferroelectric target sputtering.     

Investigation of the helicon discharge plasma parameters in a hybrid RF plasma system

Results of an experimental study of the helicon discharge plasma parameters in a prototype of a hybrid RF plasma system equipped with a solenoidal antenna are described. It is shown that an increase in the external magnetic field leads to the formation of a plasma column and a shift of the maximum ion current along the discharge axis toward the bottom flange of the system. The shape of the plasma column can be controlled via varying the configuration of the magnetic field.     

Generation of low-frequency radiation by a nonequilibrium plasma of an RF discharge in a linear mirror magnetic confinement system

The generation of ion-cyclotron radiation in a plasma resonator formed by an RF discharge in a linear mirror magnetic confinement system is revealed and investigated. It is shown that the experimental setup makes it possible to study the composition of a multicomponent discharge plasma and to detect multiply charged ions. Collisional losses in such a resonator are estimated, and the pressure range within which the growth rate of the ion-cyclotron instability substantially exceeds the collisional damping rate is determined.     

ECR heating power modulation as a means to ease the overcoming of the radiation barrier in fusion devices

A method is proposed to ease the overcoming of the impurity radiation barrier during current drive in tokamaks, as well as in alternative fusion and plasmochemical systems with ECR plasma heating. The method is based on the fact that the dependence of the ionization rate on the electron temperature is strongly nonlinear and the dependence of the recombination rate on the latter is weaker. The result is that, during temperature oscillations, the effective temperature for ionization-recombination processes is higher than that in a steady state, so the ionization equilibrium is shifted and strongly emitting ions are stripped more rapidly. Thereby, ECR plasma heating in the initial discharge stage can be made more efficient by modulating the heating power at a low frequency. The evolution of the electron temperature in a homogeneous hydrogen plasma with a carbon impurity and in small ISX-scale tokamaks is simulated numerically, as well as the evolution of the electron and ion temperatures and of the current during discharge startup in the ITER device. Numerical simulations of the effect of modulation of the ECR heating power on the rate of heating of nitrogen, oxygen, and argon plasmas were also carried out. The assumption of coronal equilibrium is not used. It is shown that the low-frequency modulation of the heating power can substantially ease the overcoming of the radiation barrier.     

Ar + H<Subscript>2</Subscript> Plasma Interacting with Lithium-Filled Capillary Porous Structure

Ar + H₂ plasma interacting with liquid lithium was carried out on a one-cathode linear plasma device (SCU-PSI). The lithium sample was covered with capillary porous structure (CPS). It is found that the electron temperature of applied plasma ranged from ~0–1 eV and electron density ranged from 0.1 × 10²⁰ to 1 × 10²⁰ m^?3. The experimental results indicate that a reduction in the electron temperature and the lithium evaporation is found as the percentage of H₂ increases When the ratio of argon and hydrogen keeps constant, the electron temperature and lithium evaporation increase with applied input power, respectively. The retention of hydrogen atoms in lithium surface results in reducing the lithium evaporation. The XRD analysis result shows that during plasma radiation no LiH is formed.     

Loss of hydrogen atoms in H<Subscript>2</Subscript> plasma on the surfaces of materials used in EUV lithography

Low-pressure hydrogen is an important component of the working medium in extreme ultraviolet (EUV) projection lithography. Under the action of EUV photons and fast secondary electrons on the gas medium, plasma and atomic hydrogen, actively interacting with the surface, are produced. This interaction is very important, because it largely determines the lifetime of the multilayered EUV optics. In this study, the loss of atomic hydrogen under the conditions of a low pressure (<10 Torr) RF plasma discharge on the surfaces of materials used in EUV lithography is investigated. The surface loss probabilities of H atoms on these materials are measured. It is shown that surface recombination of atomic hydrogen goes according to the Eley-Rideal mechanism via direct recombination of H atoms from the gas phase with chemically and physically adsorbed atoms. In this case, the surface recombination probability is mainly determined by the density of chemical adsorption sites. The density of adsorption sites and the desorption energy of H atoms are estimated. The desorption energy of physically adsorbed H atoms on pure metal surfaces (or surfaces exposed to plasma) is about 0.5 eV, and the density of sorption sites is close to the surface density of atoms. This results in a high loss probability of H atoms on metals (∼0.1). Therefore, to provide efficient transportation of hydrogen atoms, it is necessary to use materials with the lowest loss probability of H atoms, i.e., dielectrics.     

Generation of terahertz radiation in the reflection of a laser pulse from a dense plasma

The generation of low-frequency (terahertz) electromagnetic radiation in the reflection of a laser pulse from the boundary of a dense plasma is considered. Low-frequency wave electromagnetic fields in vacuum are excited by a vortex electric current that is induced at the plasma boundary by the ponderomotive force of the laser pulse. The spectral, angular, and energy parameters of the low-frequency radiation, as well as the spatiotemporal structure of the emitted waves, are investigated. It is shown that for typical parameters of present-day laser plasma experiments, the power of terahertz radiation can amount to tens of megawatts.     

Model for calculating low-current moderate-pressure RF discharges with photon-driven secondary electron photoemission from the electrode surface

A model is developed for calculating a low-current moderate-pressure RF discharge with allowance for an electron cloud that is formed by electrons produced during the preceding periods of the RF field and fills the electrode sheath at regular intervals in accordance with the phase of the RF voltage applied to the electrodes. The cloud arises due to a phase shift of π/2 between the voltage across the sheath and that across the column of a low-current RF discharge plasma. The photon generation mechanism is as follows: as the cloud electrons fill the sheath, they acquire energy in superelastic collisions with metastables produced by the sheath electrons during the preceding periods of the RF field and then excite the metastable states to emitting levels. The discharge sheath forms due to the overlap of the secondary electron avalanches triggered by electron photoemission from the electrode surface. The parameters of the sheath in a low-current RF discharge are determined by the conditions under which the electron photoemission current in the sheath is self-sustaining, but the capacitive susceptance of the sheath is substantially higher than its active electrical conductance. The results of calculations are compared with the experimental data.     

Effect of an external RF field on the beam-plasma discharge in a magnetic field

The effect of an RF field on a steady-state beam-plasma discharge with a plane electrode placed parallel to a sheetlike electron beam is studied experimentally. The plasma parameters were measured by a single probe, and the electron distribution function was determined with the use of an electrostatic analyzer. The energy and current of the electron beam were E _B=2.5 keV and J _B=0.05–1.5 A, respectively. The working pressure was p=2×10^?5–10^?3 torr. The frequency of the external RF field was 13.56 MHz. Both the steady-state regimes in which the RF field had no effect on the plasma parameters and regimes with a pronounced effect of the RF field were observed. The experiments show that the regime of the discharge depends strongly on the plasma density and the magnetic field. The parametric instability is studied theoretically in the weak-turbulence approximation. It is shown that, due to the decay nature of the spectrum of plasma oscillations, the onset of instability is accompanied by the transfer of the energy of fluctuations over the spectrum, from the pump frequency toward its harmonics.     

Contactless method for studying the parameters of the electrode region of an RF discharge

A nonintrusive contactless method for studying the parameters of the electrode region of a capacitive low-pressure RF discharge is proposed. The method involves the measurements of dc and ac electric voltages at the elements of the discharge circuit with subsequent calculations of both the electrostatic potential drop across the electrode sheath and the sheath thickness by using relations derived in the paper. For a collisionless electrode sheath, the density of the positive-ion current onto the electrode and the charge density at the plasma boundary are determined. It is shown experimentally that the method can be successfully applied to studying capacitive RF discharges with inner or outer electrodes.     

Experimental study and numerical simulation of ion cyclotron heating of a hydrogen plasma in the T-11M tokamak

Results are presented from investigations of the possibility of heating a hydrogen plasma at the fundamental harmonic of the ion cyclotron frequency in the T-11M tokamak. The fluxes of charge-exchange atoms that escape from the plasma in the radial direction and across the toroidal magnetic field (transverse neutrals) were recorded by a Lakmus neutral particle analyzer. Measurements by the analyzer show that, during an RF pulse, the ion temperature increases by approximately 50–100 eV. Such plasma parameters as the ion temperature, rotation velocity, and isotopic composition were measured by a high-resolution spectrometer. According to the data from high-resolution spectroscopy, the ion temperature increases by approximately 150 eV. Results from numerical simulations of the ion cyclotron resonance heating of a hydrogen plasma in the T-11M tokamak are also given.     

Feasibility of stabilizing a vacuum-diode X-ray source with a laser-plasma cathode

Results are presented from experimental studies of discharge instabilities and the energy and temporal characteristics of a vacuum-diode X-ray source with a laser plasma cathode over a wide range of energies, intensities, and durations of the plasma-forming laser pulse. It is experimentally shown that the vacuum-discharge dynamics and radiation processes in different discharge stages substantially depend on the parameters of the laser radiation. The shortest recorded pulse duration (10 ns) of Ti K-line radiation (4.5 keV) with a total photon number of 10¹¹ is achieved when the laser plasma cathode is produced by a laser pulse with a duration of 27 ps and an intensity of 10¹³ W/cm². It is found that the contrast of characteristic emission against the bremsstrahlung background is maximum when discharge instabilities are suppressed and the accelerating voltage is three to four times higher than the threshold voltage for line excitation.     

The study of the mechanisms of formation of reactive oxygen species in aqueous solutions on exposure to high peak-power pulsed electromagnetic radiation of extremely high frequencies

Using the method of enhanced chemiluminescence in a peroxidase-luminol-p-iodophenol system, we found the formation of reactive oxygen species (in equivalent of hydrogen peroxide concentration) in 1 mM phosphate buffer under the exposure to high peak-power pulsed electromagnetic radiation of extremely high frequencies (37 GHz, peak power 20 kW, pulse width 400 ns, repetition rate 500 Hz). The results obtained show that the formation of hydrogen peroxide in aqueous solutions under the action of electromagnetic radiation is the result of the summary influence of heat and thermoacoustic waves excited in the solutions.     

Spatial distribution of the RF power absorbed in a helicon plasma source

The spatial distributions of the RF power absorbed by plasma electrons in an ion source operating in the helicon mode (ω _ci < ω < ω _ce < ω _pe ) are studied numerically by using a simplified model of an RF plasma source in an external uniform magnetic field. The parameters of the source used in numerical simulations are determined by the necessity of the simultaneous excitation of two types of waves, helicons and Trivelpiece-Gould modes, for which the corresponding transparency diagrams are used. The numerical simulations are carried out for two values of the working gas (helium) pressure and two values of the discharge chamber length under the assumption that symmetric modes are excited. The parameters of the source correspond to those of the injector of the nuclear scanning microprobe operating at the Institute of Applied Physics, National Academy of Sciences of Ukraine. It is assumed that the mechanism of RF power absorption is based on the acceleration of plasma electrons in the field of a Trivelpiece-Gould mode, which is interrupted by pair collisions of plasma electrons with neutral atoms and ions of the working gas. The simulation results show that the total absorbed RF power at a fixed plasma density depends in a resonant manner on the magnetic field. The resonance is found to become smoother with increasing working gas pressure. The distributions of the absorbed RF power in the discharge chamber are presented. The achievable density of the extracted current is estimated using the Bohm criterion.