Electrophoretic and enzymatic studies on the crude extracellular enzyme system of the cellulolytic bacterium Cellulomonas sp. ATCC 21399

Cellulomonas sp. ATCC 21399 produced extracellular enzyme activities against Avicel, H(3)PO(4)-swollen Avicel, carboxymethylcellulose, (1-3, 1-4)-beta-D-heteroglucan, xylan, galactomannan, and amylose drying growth on microcrystalline cellulose. No extracellular cellobiase activity was produced. Crossed immunoelectrophoresis of the crude extracellular enzyme system revealed 15 immunologically distinct immunoprecipitates. The immunoprecipitates of endoglucanase A, endoglucanase B and the xylanase appeared heterogeneous with several optima, whereas the immunoprecipitates of endoglucanase C and the amylase appeared homogeneous. The heterogeneity of endoglucanase A, endoglucanase B and xylanase was also visualized using electrofocusing-immunoelectrophoresis. Electro-focusing could resolve the activity against carboxymethylcellulose into six peaks, whereas only one peak of activity against Avicel was observed. The later peak coincided with the major peak of activity against carboxymethylcellulose with isoelectric point between pH 4.0-5.0.     

Cloning and expression of a β-1,4-endoglucanase gene from Cellulomonas sp. CelB7 in Escherichia coli; purification and characterization of the recombinant enzyme

Abstract A gene library of a newly isolated Cellulomonas sp. strain was constructed in Escherichia coli and clones were screened for endoglucanase activity using dye-labelled carboxymethylcellulose. Seventeen clones were isolated that carried DNA inserts coding for endoglucanase enzymes. Of the 17 clones, one carrying the gene cegA , was further characterized. The recombinant endoglucanase was purified by FPLC. The endoglucanase was active against carboxymethylcellulose, lichenin and also degraded crystalline cellulose and birchwood xylan. The molecular mass of the enzyme (36 kDa), and its pH (7.4) and temperature (35 °C) optima were determined.     

Improved viscometric assay for cellulase

A viscometric assay for the determination of carboxymethylcellulase is described. The method, which is developed from a direct theoretical approach, takes into account a kinetic energy correction and the non-Newtonian behavior of carboxymethylcellulose solutions. The enzymic hydrolysis of carboxymethylcellulose shows strong competitive inhibition by the products of the reaction and a method is presented for estimating the initial velocity of such reactions. A direct chemical determination of reducing end groups was used to confirm the validity of this approach.     

Utilisation of carbon substrates by multiple genotypes of ericoid mycorrhizal fungal endophytes from eastern Australian Ericaceae

The abilities of six genotypes of two putative Helotiales ascomycete ericoid mycorrhizal fungal taxa from Woollsia pungens and Leucopogon parviflorus (Ericaceae) to utilise glucose, galactose, mannose, cellobiose, carboxymethylcellulose, crystalline cellulose, starch and xylan as sole carbon sources were tested in axenic liquid culture. With the exception of all taxon II isolates on carboxymethylcellulose, all genotypes of both taxa produced measurable biomass on all substrates. Significant intraspecific variation was observed in biomass production on all substrates. While pooled data for all genotypes of each taxon revealed significant interspecific differences in biomass production on carboxymethylcellulose, glucose, cellobiose, and starch, mean biomass production for each taxon on the latter three substrates differed less than threefold, suggesting that the saprotrophic abilities of the two taxa are broadly similar.     

Sensitivity of bacterial coaggregation to chelating agents

Coaggregation between pairs of microorganisms was found to be inhibited by chelating agents, such as acetylacetone, citrate, EDTA and carboxymethylcellulose. Assays were conducted on eight pairs of periodontopathogens and one pair consisting of Escherichia coli and Saccharomyces cerevisiae. The inhibitory effects of the chelating agents were reversible except for Actinomyces naeslundii 12104, the adhesin of which was irreversibly inactivated. Even though the bacteria possessed different kinds of adhesins, their sensitivity to chelating agents appears to be a common property. Non-toxic chelating agents, such as carboxymethylcellulose and citrate, may prove to be useful anti-adhesins.     

Detection of cellulase activity in polyacrylamide gels using Congo red-stained agar replicas

Bands that have cellulolytic activity are visualized after polyacrylamide gel electrophoresis by laying the slab gel on top of a thin sheet of 2% agar containing 0.1% carboxymethylcellulose. After a suitable incubation time, zones of carboxymethylcellulose hydrolysis are revealed by staining the agar replica with Congo red.     

The Aspergillus fumigatus cellobiohydrolase B (cbhB) promoter is tightly regulated and can be exploited for controlled protein expression and RNAi

The utility of the Aspergillus fumigatus cellobiohydrolase cbhB promoter for controlled gene expression has been investigated. cbhB message was present at high levels in the presence of carboxymethylcellulose and undetected in the presence of glucose. A reporter construct using the cbhB promoter showed similar behaviour and gave lower message levels than the Aspergillus nidulans alcA promoter under repressing conditions. An RNAi construct driven by the cbhB promoter was used to down-regulate the alb1 gene; transformants showed low alb1 message levels and a loss-of-function phenotype with carboxymethylcellulose, while both wild-type message levels and phenotype were seen with glucose. The cbhB promoter is therefore tightly controlled and can be exploited for the study of A. fumigatus.     

Growth of "seeded" cellulolytic enrichment cultures on mesquite wood

Eleven enrichment cultures were developed by a "seeded" enrichment culture technique, and one was developed by a simple enrichment technique. The seeded enrichment, the pure "seed," and the simple enrichment cultures were compared during growth on mesquite wood, cotton, carboxymethylcellulose, and cellobiose. All of the enrichment cultures were cellulolytic and exceeded the pure seed cultures in mesquite wood hydrolysis and/or viable cell count. Yeast extract improved, but was not essential for, growth of the seeded enrichment cultures on carboxymethylcellulose. Two of the seeded enrichment cultures, CAD5 and CAD11, grew best at 37 degrees C and pH 7.0 on mesquite wood. A 1.0% (wt/vol) wood concentration was optimum for their growth.     

Isolation of eukaryotic ribosomal proteins: purification and characterization of S25 and L16.

Proteins were extracted from rat liver ribosomal subunits with ethanol and ammonium chloride. The extract from the 40S subunit contained mainly S25, but smaller amounts of a number of other proteins were found as well; the extract from the 60S subparticle had L16 in addition to P1, P2, S25, and several other proteins. S25 and L16 had not been purified before. The former was isolated from the ethanol-ammonium chloride extract by stepwise elution from carboxymethylcellulose with LiCl, chromatography on phosphocellulose, and filtration through Sephadex G-75; L16 was purified by elution from carboxymethylcellulose with LiCl (in steps). The molecular weight of the two proteins was estimated by polyacrylamide gel electrophoresis in sodium dodecyl sulfate; and amino acid composition was determined also.     

Rheological research in creating cellulose ester-based hydrogels with antibiotics

Rheological properties of antibiotic hydrogels based on cellulose ethers were studied. It was shown possible to use methylcellulose and sodium carboxymethylcellulose as bases for hydrogels with erythromycin and fusidic acid.     

Growth of “Seeded” Cellulolytic Enrichment Cultures on Mesquite Wood

Eleven enrichment cultures were developed by a “seeded” enrichment culture technique, and one was developed by a simple enrichment technique. The seeded enrichment, the pure “seed,” and the simple enrichment cultures were compared during growth on mesquite wood, cotton, carboxymethylcellulose, and cellobiose. All of the enrichment cultures were cellulolytic and exceeded the pure seed cultures in mesquite wood hydrolysis and/or viable cell count. Yeast extract improved, but was not essential for, growth of the seeded enrichment cultures on carboxymethylcellulose. Two of the seeded enrichment cultures, CAD5 and CAD11, grew best at 37°C and pH 7.0 on mesquite wood. A 1.0% (wt/vol) wood concentration was optimum for their growth.     

Enumeration of cellulolytic anaerobic bacteria from the bovine rumen: Comparison of three methods

Three methods—the most probable number technique, a cellulose agar overlay on basal carbohydrate plates, and carboxymethylcellulose in basal carbohydrate plates—were compared for ease of preparation, interpretation of results, and agreement in estimation of size of the cellulolytic bacterial population in digesta samples from the rumen. The most probable number method yielded consistent detection of cellulose hydrolysis in liquid medium but required at least a 10-day incubation, and its mean was associated with wide 95% confidence intervals. The cellulose overlay method was the least consistent, and zones of hydrolysis often were difficult to see. The carboxymethylcellulose method was the easiest method for preparation and required only a 2-day incubation. The three methods estimated the same population size (all within one-half log unit of each other), but the carboxymethylcellulose method had the lowest coefficient of variation.     

Functionalized titanium oxide surfaces with phosphated carboxymethyl cellulose: characterization and bonelike cell behavior

The performance of dental or orthopedic implants is closely dependent on surface properties in terms of topography and chemistry. A phosphated carboxymethylcellulose containing one phosphate group for each disaccharide unit was synthesized and used to functionalize titanium oxide surfaces with the aim to improve osseointegration with the host tissue. The modified surfaces were chemically characterized by means of X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. The investigation of the surface topography was performed by atomic force microscopy measurements before and after the polysaccharide coating. In vitro biological tests using osteoblastlike cells demonstrated that functionalized TiO(2) surfaces modulated cell response, in terms of adhesion, proliferation,and morphology. Phosphated carboxymethylcellulose promoted better cell adhesion and significantly enhanced their proliferation. The morphology of cells was polygonal and more spread on this type of modified surface.These findings suggest that the presence of a phosphate polysaccharide coating promotes osteoblast growth on the surface potentially improving biomaterial osseointegration.     

Improved pharmacological properties for superoxide dismutase modified with β-cyclodextrin–carboxymethylcellulose polymer

Superoxide dismutase was glycosidated with cyclodextrin-branched carboxymethylcellulose. The modified enzyme contained 1.4 mol polymer per mol protein and retained 87% of the initial activity. The anti-inflammatory activity of superoxide dismutase was 2.2-times increased after conjugation and its plasma half-life time was prolonged from 4.8 min to 7.2 h.     

Electro-optical properties of carboxymethylcellulose. I. Concentration and ionic strength dependence

The experimental conditions for studying the electro-optical properties of a natural, modified polyelectrolyte, carboxymethylcellulose (DS 1.3; DP 180) were determined. The transient Kerr effect was found to be a function of CMC concentration, field strength, and ionic strength, I. If the concentration and I were low enough (c < 20 mg.l^?1), saturation was obtained for field strengths of approximately 15 kV.cm^?1. The optical anisotropy was shown to be independent of I; the electrical anisotropy decreased sharply when I increased. These results are discussed in connection with polarization theories of polyelectrolytes. The molecular dimensions of carboxymethylcellulose, calculated from the birefringence kinetics, suggest that the molecule is a rigid rod.     

The enzymatic conversion of L-histidine to urocanic acid by whole cells of Micrococcus luteus immobilized on carbodiimide activated carboxymethylcellulose.

Whole cells of Micrococcus luteus (formerly Sarcina lutea ATCC 9341) have been covalently linked to a carboxymethylcellulose support system, with the retention of histidine ammonia-lyase activity. The dependence of the rate of urocanic acid formation on pH, temperature, and added surfactant concentration was similar for the free and the immobilized cells. The immobilization procedure used is based on the carbodiimide activation of carboxymethylcellulose and has been optimized for the histidine ammonia-lyase activity of the immobilized cells on a given weight of cellulose. In a column reactor at 23 degrees C and superficial velocity of 0.044 cm/min, 5 g of cellulose with bound cells gave a 35% conversion of an L-histidine solution (0.25M, pH 9.0) to urocanic acid for 16 days of continuous operation. The scope of this carbodiimide assisted immobilization procedure has been investigated for a series of microorganisms and a variety of carboxylate functionalized supports.     

Characterization of commercial Trichoderma reesei cellulase preparations by denaturing electrophoresis (SDS-PAGE) and immunostaining using monoclonal antibodies.

Fifteen different cellulase preparations from Trichoderma reesei, obtained either commercially or from pilot plants, were analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and immunoblotting using monoclonal antibodies against two cellobiohydrolases (CBH I, CBH II), an endoglucanase (EG I), and beta-glucosidase. The staining patterns were compared with the activities of the preparations against filter paper (FPU), carboxymethylcellulose (CMC-ase), cellobiose (beta-glucosidase), and azocasein (protease). Variable amounts of proteolytic degradation products of CBH I, CBH II, and EG I were seen in most samples, and only half of them contained intact beta-glucosidase. The degree of proteolysis did not correlate with any significant difference in the respective activities of these preparations against filter paper cellulose or carboxymethylcellulose. In more than 50% of all cases a decreased beta-glucosidase activity and the absence of intact beta-glucosidase protein in Western blots was observed in preparations displaying high proteolytic activity.     

Recovery of erythropoietin from anemic sheep plasma

A method is described for the large-scale preparation of erythropoietin from anemic sheep plasma. DEAE-cellulose and carboxymethylcellulose column chromatography was used to prepare Step II erythropoietin. A total of 168 sheep yielded 499 liters of plasma from which 323,000 IU of Step II erythropoietin was obtained.     

The Influence of Sodium Carboxymethylcellulose on Drug Release from Polyethylene Oxide Extended Release Matrices

Anionic polymer sodium carboxymethylcellulose (CELLOGEN® HP-HS and/or HP-12HS) was investigated for its ability to influence the release of three model drugs propranolol hydrochloride, theophylline and ibuprofen from polyethylene oxide (POLYOX™ WSR 1105 and/or Coagulant) hydrophilic matrices. For anionic ibuprofen and non-ionic theophylline, no unusual/unexpected release profiles were obtained from tablets containing a mixture of two polymers. However, for cationic propranolol HCl, a combination of polyethylene oxide (PEO) with sodium carboxymethylcellulose (NaCMC) produced a significantly slower drug release compared to the matrices with single polymers. The potential use of this synergistic interaction can be a design of new extended release pharmaceutical dosage forms with a more prolonged release (beyond 12 h) using lower polymer amount, which could be particularly beneficial for freely water-soluble drugs, preferably for once daily oral administration. In order to explain changes in the obtained drug release profiles, Fourier transform infrared absorption spectroscopy was performed. A possible explanation for the more prolonged propranolol HCl release from matrices based on both PEO and NaCMC may be due to a chemical bond (i.e. ionic/electrostatic intermolecular interaction) between amine group of the cationic drug and carboxyl group of the anionic polymer, leading to a formation of a new type/form of the active (i.e. salt) with sustained release pattern.Key words: extended release, FT-IR, ibuprofen, matrix tablet, polyethylene oxide, polymer combination, propranolol hydrochloride, sodium carboxymethylcellulose, theophylline     

Growth and Cellulase Formation by Cellvibrio fulvus

S ummary : The aerobic cellulolytic bacterium Cellvibrio fulvus grew on several sugars and polysaccharides, but not on highly substituted cellulose derivatives, organic acids and alcohols. Whereas no growth was obtained on long cotton fibres, it occurred on such fibres cut into small pieces, and on filter paper and chromatography powders derived from cotton. Lignin free wood pulp was rapidly degraded. The organism grew best at pH 7–8 and utilized nitrate, ammonium and some amino acids as nitrogen sources. The bacteria have cell-bound cellulase but enzyme was also found in the culture medium. Glucose repressed cellulase formation and the enzyme activity of cultures grown on cellulose was much higher than on sugars. Reducing sugar was not detected in cellulose cultures. The pH optimum for hydrolysis of carboxymethylcellulose (CMC) was 7 and the enzyme was inhibited by mercuric acetate but not by p -chloromercuribenzoate or EDTA. Fractionation of cellulase preparations from cultures grown on partially hydrolysed filter paper gave many components of different molecular weights. The activities of these components against carboxymethylcellulose and microcrystalline cellulose differed.